Reliability engineer jobs in Costa Mesa, CA - 942 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Rotating Equipment Reliability Engineer Job Summary The Marathon Los Angeles Refinery, located in Carson/Wilmington CA, is seeking a Rotating Equipment Reliability Engineer to maintain and improve operational availability, optimize equipment life cycle cost, and achieve best in class reliability. This position supports operating area teams on issues related to rotating equipment and collaborates with other departments daily. The Rotating Equipment Reliability Engineer will support troubleshooting machinery issues, develop project requests, implement new solutions, and lead reliability programs. The schedule for the position is 4 days - 10 hours days - Monday-Thursday - core hour 7 AM - 3:30 PM, after hours calls that can be handled over the phone can occur once a month and support TAR/Major Maintenance events once a year. Key Responsibilities Maintenance and Area Team Support Serve as a technical resource to the Maintenance Machinery Foreman, Technicians, and Operations to troubleshoot, diagnose, and repair rotating equipment. Develop and provide training on rotating equipment and support systems for Maintenance and Operations personnel. Lead site reliability programs and initiatives including Incident Investigations (using RCFA methods), Lost Opportunity Tracking, Pump Seal Reliability Program, PM Optimization, and Area Team Threats Neutralization Program to identify opportunities for improvement and drive solutions. Leads multi-department investigation teams to solve recurring rotating equipment failures Submit and approve equipment Preventative Maintenance (PM) plans to ensure compliance with Refinery Standard Practices and reliability initiatives. Perform equipment condition assessments to determine fitness for service and to develop equipment care and repair plans. Review equipment repair reports from outside shops, provide input on inspection requirements and approve repair plans ensuring compliance with Marathon specifications. Identify critical equipment spare part requirements and ensure warehouse storage is aligned with the plan. Identify and maintain a list of obsolete equipment and manages the replacement/upgrade plan. Interface with MPC Rotating Equipment Advisory Group to share lessons learned and best practices. Engage management to champion specification changes to improve equipment reliability and department efficiency. Projects and TAR Support Develop Project Request Forms (PRFs) for reliability improvements. Develop, submit, and ensure MM/TAR scope is well justified, documented correctly, and meets maintenance specifications and industry best practices. Define expectations and project deliverables related to Mechanical Integrity and reliability requirements, as well as site preferred technologies and methodologies. Review project documentation, P&ID's, and data sheets to ensure accuracy. Provide technical support to Major Maintenance (MM) and Turnaround (TAR) execution team, assisting with equipment inspection, QA/QC, and FCO process. Health, Safety, Environmental and Mechanical Integrity Stewardship Participate in safety walks and field audits on a regular basis. Serve as a technical resource to the Process Safety Department during Area Team HAZOP reviews. Lead or support incident investigations to determine root cause and identify corrective actions. Support MOC process and ensure that technical documentation is maintained per company policy. Champion Mechanical Integrity program and the Major Equipment Deficiency process with key stakeholders. Personal Development Maintain a personal development plan and attend training to foster professional development to support career goals. Education, Experience and Skills Minimum Qualifications Must have Bachelor's degree in Mechanical Engineering. (Education must be obtained/completed prior to start date) Must have at least 2 years of post degree engineering experience. Experience should be in maintenance, machinery or engineering in a refinery, petro-chemical or other related heavy industry. Must have experience interpreting and applying industrial and company standards. Must have strong understanding of Management of Change requirements and process. Able to understand mechanical systems and cross-section drawings to troubleshoot field equipment. Able to successfully communicate complex system information across various audiences, from hourly personnel to Refinery management. Must be proficient in Microsoft: Word, Excel and Outlook. Must be able to wear appropriate PPE in the refinery (respirator), be able to physically perform all tasks in the field and take hair drug test and physical. Must have a valid driver's license. (MPC determines valid status.) Must be legally authorized to work in the US without the need for future VISA sponsorship. Travel Requirement is less than 5 %. The schedule for the position is 4 days - 10 hours days - Monday-Thursday - core hour 7 AM - 3:30 PM, after hours calls that can be handled over the phone can occur once a month and support of TAR/Major Maintenance events once a year. Preferred Qualifications Strong working knowledge of all applicable industry standards for rotating equipment is preferred. Experience in the operation, maintenance and troubleshooting of rotating equipment such as pumps, turbines, centrifugal compressors, and reciprocating compressors. Experience with machinery control systems such as anti-surge protection systems, turbine governors and overspeed protection, and performance control software is preferred. Experience in the use of machinery condition monitoring tools such as Bently Nevada System 1, Emerson CSI, Prognost, and Windrock is preferred. Experience in the installation of large machinery equipment, including foundation design, grouting, pipe strain, and alignment is preferred. Working knowledge and application experience of RCM principles, RCFA and FMEA methodology and application is preferred. Experience utilizing CMMS software. SAP experience is preferred. Relocation may be available. ************************************* This job will posted through January 18, 2026 This position belongs to a family of jobs with increasing responsibility, competency and skill level. Actual position title and pay grade will be based on the selected candidate's experience and qualifications. Learn more about Marathon Petroleum's benefits at ************************** As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Carson CA Refinery Job Requisition ID: 00019816 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 2101 E Pacific Coast Hwy Additional locations: Education: Bachelors (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Engineer, Satellite Reliability and Radiation, meo Sphere PROGRAM DESCRIPTION IRIS2 is the new European Union secure satellite constellation. This project is the European Union's answer to the pressing challenges of tomorrow to provide secure connectivity services and enhanced communication capacities to the EU and its Member States as well as to governmental users, private companies and European citizens while ensuring high-speed internet broadband to cope with connectivity dead zones. SES - together with other consortium partners and core members - has been selected by European Commission to build and to operate the IRIS2 multi-orbit satellite constellation. As the project enters its next phase, our team is expanding to support the development of future services and products enabled by the IRIS2 system. We are now seeking skilled professionals to help shape the service provisioning landscape and ensure the successful deployment of cutting-edge satellite connectivity solutions. Role description As Satellite Reliability and Radiation Engineer, you will analyse and assess the long-term performance and robustness of communication payloads operating in the challenging space environment. This role focuses on analysing and mitigating reliability risks across the payload lifecycle, from design and component selection to integration and qualification. A key aspect involves assessing radiation effects such as Total Ionizing Dose (TID), Single Event Effects (SEE), and displacement damage, and implementing strategies like shielding optimization and radiation-hardened component selection to guarantee mission success. Beyond ground-based analysis and testing, this position offers the unique opportunity to validate reliability and radiation performance through in-orbit testing campaigns. The engineer will collaborate closely with system, RF, and payload teams to integrate reliability and radiation considerations into the overall design. In your first twelve months, you and the teams will have selected and radiation tested multiple electronic components as well as performed radiation and reliability analysis of state of the art space communication payloads. Within two years, the system will have flown in space, demonstrating its ability to survive space environment. As a member of an agile project organization, you will be expected to bring a flexible way of working and an adaptive mindset to a dynamic development environment. As A Engineer, Satellite Reliability and Radiation, meo Sphere, you will be responsible for : * System Reliability Analysis: Perform reliability predictions and assessments for satellite subsystems and components. * Failure Mode and Effects Analysis (FMEA): Identify potential failure modes and their impact on mission success. * Redundancy Planning: Design and validate redundancy strategies for critical systems. * Reliability Modelling: Use statistical models and tools (e.g., MIL-HDBK-217, FIDES) to estimate component and system reliability. * Radiation Environment Analysis: Model and predict radiation exposure in different orbits (LEO, GEO, MEO). * Radiation Effects Assessment: Evaluate Total Ionizing Dose (TID), Single Event Effects (SEE), and Displacement Damage (DD) on electronic components. * Component Selection & Screening: Choose radiation-hardened or tolerant components and verify compliance with mission requirements. * Shielding Design: Optimize shielding to mitigate radiation effects while balancing mass constraints. * Radiation Testing: Plan and oversee radiation tests (gamma, proton, heavy ion) for components and materials. Qualifications and Experience * Master's degree in engineering or science field required * Minimum of 5 years of relevant experience * Understanding of reliability principles (MTBF, FMEA, reliability block diagrams). Familiarity with reliability prediction standards (e.g., MIL-HDBK-217, FIDES). * Basic knowledge of space radiation environments (LEO, GEO, MEO). Awareness of radiation effects on electronics: TID, SEE, displacement damage. * Strong ability to work independently and without supervision * Fluency in English, both written and spoken, any other European language is considered as an asset Other key requirements / comments * Eligibility for ESA/EU SECRET personnel security clearances is essential. Candidates must be prepared to undergo a security clearance procedure, as this position may require holding such clearance * Willing to work at least 60% onsite from office * Willingness to travel domestically and internationally The salary range for this full-time position is $100,000.00 - $140,000.00 + bonus + benefits. Our salary ranges are determined by role, level, and location. The range displayed on this job posting reflects the target salary for new hires in Torrence, California. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. We understand market salaries can evolve and we are conscious that sometimes these will be open to review. SES and its Affiliated Companies are committed to providing fair and equal employment opportunities to all. We are an Equal Opportunity employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, pregnancy, sex, sexual orientation, gender identity, national origin, age, genetic information, protected veteran status, disability, or any other basis protected by local, state, or federal law. For more information on SES, click here.

Job Description At the forefront of the future of connected living, TP-Link's Systems Inc. R&D Center in Irvine, Southern California's innovation hub, spearheads research and development of next-generation networking, IoT smart home products, and software services. Our team of passionate engineers are constantly innovating, engineering solutions that transform the end user experience with simpler, smarter, and more reliable connectivity. We're looking for a passionate and experienced Site Reliability Engineer to join our team and play a crucial role in ensuring our cloud platform's security, Reliability, scalability, and operational excellence. About Us: Headquartered in the United States, TP-Link Systems Inc. is a global provider of reliable networking devices and smart home products, consistently ranked as the world's top provider of Wi-Fi devices. The company is committed to delivering innovative products that enhance people's lives through faster, more reliable connectivity. With a commitment to excellence, TP-Link serves customers in over 170 countries and continues to grow its global footprint. We believe technology changes the world for the better! At TP-Link Systems Inc, we are committed to crafting dependable, high-performance products to connect users worldwide with the wonders of technology. Embracing professionalism, innovation, excellence, and simplicity, we aim to assist our clients in achieving remarkable global performance and enable consumers to enjoy a seamless, effortless lifestyle. Responsibilities: Assist in implementing and operating Microservices on Kubernetes cloud-based platforms. Collaborate with the Cloud Technical Development and DevOps teams to deploy services to the Multi-Cloud Platform. Conduct Load Tests and Chaos Tests to ensure the scalability and reliability of microservices. Build observability for Microservices and cloud platforms like AWS, OCI, Azure, and GCP. Contribute to writing and executing disaster recovery plans in collaboration with the Development and DevOps teams. Help analyze and resolve production risks caused by insufficient resources, such as node groups, CPU, memory, HPA scheduling, JVM pre-warming, etc. Write and maintain scripts for automation using languages like Python, Go, or Bash. Assist in defining and maintaining the KPIs (SLA/SLO/SLI) for all cloud microservices with development teams to better understand the business. Create and maintain technical documentation, including architecture diagrams, design documents, and standard operating procedures. Ensure adherence to security and compliance standards, including ISO27001, SOC2, and GDPR. Participate in incident response efforts to troubleshoot and resolve production issues quickly. Conduct post-incident analysis to identify root causes and potential workarounds/solutions. Contribute to product/technology selection, including implementation of POCs. Be adaptable to change and evolving processes and tools. Participate in mentoring and training less senior members of the team. Be part of the on-call rotation and provide support after work hours and on weekends. Other duties as assigned. Requirements Bachelor's degree in Computer Science, Information Technology, or a related field. 1-3 years of experience as a Site Reliability Engineer or in a related role. Proficiency in programming and scripting languages like Java, Python, Bash, or PowerShell. Hands-on experience in SRE, DevOps, cloud operations, and cloud security best practices. Basic knowledge of security technologies, including Identity and access management, Network security, Application security, and Data protection. Strong problem-solving and analytical skills, with the ability to work independently and as part of a team. Experience in developing and maintaining technical documentation and implementing compliance requirements. Additional Skills (Preferred): Relevant cloud certifications include AWS Solutions Architect, Azure Solutions Architect Expert, or GCP Professional Cloud Architect. Experience with container orchestration technologies (e.g., Kubernetes) Benefits Salary range: $100,000 - $140,000 Free snacks and drinks, and provided lunch on Fridays Fully paid medical, dental, and vision insurance (partial coverage for dependents) Contributions to 401k funds Bi-annual reviews, and annual pay increases Health and wellness benefits, including free gym membership Quarterly team-building events At TP-Link Systems Inc., we are continually searching for ambitious individuals who are passionate about their work. We believe that diversity fuels innovation, collaboration, and drives our entrepreneurial spirit. As a global company, we highly value diverse perspectives and are committed to cultivating an environment where all voices are heard, respected, and valued. We are dedicated to providing equal employment opportunities to all employees and applicants, and we prohibit discrimination and harassment of any kind based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Beyond compliance, we strive to create a supportive and growth-oriented workplace for everyone. If you share our passion and connection to this mission, we welcome you to apply and join us in building a vibrant and inclusive team at TP-Link Systems Inc. Please, no third-party agency inquiries, and we are unable to offer visa sponsorships at this time.

LegalZoom is on a mission to help people navigate the legal system with confidence and clarity. As a leader in online legal services for over 20 years, we combine technology, attorney-led solutions, and expertise to protect the aspirations, lives, and legacies of millions of customers. If you're ready to contribute to a collaborative, diverse, and distributed group of creative thinkers and problem-solvers, we can't wait to meet you. Where we work In an effort to foster a better work-life balance, LegalZoom is committed to a remote-first work environment. Our Austin, Beaverton, Frisco, LA Metro, and SF Bay Area offices allow our Zoomers to collaborate with teammates and offer special onsite events, lunches, and more. While this position is remote, we encourage and at times, require in-person collaboration at our offices. Overview We are looking for a skilled Site Reliability Engineer (SRE) to join our dynamic engineering team. As an SRE at LegalZoom, you will play a critical role in ensuring the reliability and observability of our services. SREs design and develop bespoke tools and automation solutions that address specific needs within our engineering teams, enhancing efficiency and reducing manual effort. Beyond traditional SRE responsibilities, you will focus on enhancing Developer Experience (DevX) by building custom tools and solutions that streamline workflows and empower our development team. You will * Work closely with developers to identify pain points in the development lifecycle; create and maintain internal platforms and services that improve code deployment, testing, and monitoring processes. * Collaborate with engineers, product managers, and other stakeholders to build and maintain robust systems that support our growing user base. * Coordinate with engineering teams to uphold service reliability by embracing tooling, automation, and observability solutions that support SLO adherence * Engineer and maintain scalable internal platforms and services that support our expanding Developer Experience ecosystem, with a focus on optimizing CI/CD pipelines, automated testing infrastructure, observability tooling, and monitoring systems. * Design and build custom tools and automation solutions to eliminate manual operational tasks, reduce toil, and improve system reliability-tailoring each solution to the specific needs of the platform using appropriate languages and frameworks. * Utilize tools like Terraform, CDK, or similar to manage and provision infrastructure, ensuring consistency and scalability across environments. * Occasional travel may be required as needed You have * Bachelor's and/or Master's degree, preferably in CS, or equivalent experience * At least two years performing as a Site Reliability Engineer, DevOps, or as a support operation engineering role. * Strong programming skills in languages such as Go, Typescript, or Java. * Work experience preferred in one or more of the following technologies: Kubernetes, Argo, Github (Actions). * A strong passion for the developer experience and ensuring overall reliability, scalability, and performance of our services * Knowledge of monitoring and logging tools like Prometheus, Grafana, AppDynamics, New Relic, or Datadog * Experience with cloud platforms (e.g., AWS, GCP, Azure) and container orchestration tools like Kubernetes. * Familiarity with CI/CD pipelines and tools such as Argo, Github (Actions), GitLab CI * Excellent problem-solving skills and a proactive approach to identifying and addressing system issues. * Experience working with agentic tooling (e.g., Cursor, Copilot) LegalZoom is a remote-first company and the national range for this role is $125,200 - $200,300. Actual compensation offered will depend on several factors including but not limited to: geographic location, work experience, education, skill level, and/or other business and organizational needs. In addition, an annual bonus, incentive bonus and/or restricted stock units may be provided as part of the compensation package. You will also receive a full range of medical, financial, and other benefits as seen below. ● Medical, Dental, Vision Insurance ● 401k, With Matching Contributions ● Paid Time Off ● Health Savings Account (HSA) ● Flexible Spending Account (FSA) ● Short-Term/Long-Term Disability Insurance ● Plus other wellness benefits to include: Fertility Mental Health One Medical Fringe lifestyle benefits up to $250 Join us in making a difference as we build our future and help ensure access to professional legal advice to all! LegalZoom is an equal opportunity employer, dedicated to diversity, equality, and inclusion, and provides equal employment opportunities to all employees and applicants for employment. LegalZoom prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Additionally, LegalZoom is enrolled in the E-Verify program. For additional information on E-Verify, please visit Participation and Right to Work pages.

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Company Cox Automotive - USA Job Family Group Engineering / Product Development Job Profile Sr Software Engineer Management Level Individual Contributor Flexible Work Option Hybrid - Ability to work remotely part of the week Travel % No Work Shift Day Compensation Compensation includes a base salary of $99,000.00 - $165,000.00. The base salary may vary within the anticipated base pay range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include an incentive program. Job Description The Site Reliability Engineer - Incident Response is a critical enterprise-level role responsible for accelerating incident resolution and enhancing the overall incident management process. This individual partners with engineering teams during active incidents to troubleshoot issues using monitoring and logging tools, and post-incident, delivers executive-level summaries that clearly communicate impact, root cause, and resolution. The SRE - Incident Response also plays a key role in analyzing incident response effectiveness and identifying opportunities for systemic improvements. Core Competencies and Qualifications: * Bachelor's degree in a related discipline and 4 years' experience in a related field. The right candidate could also have a different combination, such as a master's degree and 2 years' experience; a Ph.D. and up to 1 year of experience; or 16 years' experience in a related field. * Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future. * Engineering/Tooling: Demonstrates the ability to design, build, and maintain engineering solutions and tools that enhance reliability, automate incident response, and reduce operational toil. * Incident Troubleshooting: Skilled in interpreting logs, metrics, and traces to assist in identifying root causes during live incidents. * Monitoring & Observability: Proficient in tools such as Datadog, Splunk, New Relic, or similar platforms. * Strong programming background in Python, Java, or C#, with experience building, maintaining, and troubleshooting production-grade services and automation tools. * Proven ability to design and implement reliable, scalable, and highly available systems, leveraging software engineering best practices to improve system resilience and operational efficiency. * Experience developing automation and tooling to reduce toil, improve incident response, and support continuous improvement across monitoring, deployment, and recovery processes. * Ability to collaborate closely with software engineering teams to influence architecture and operational readiness, ensuring reliability is built into the system from design through production. * AI Centric Engineering: Effectively leverages artificial intelligence (AI) and machine learning (ML) tools to automate, optimize, and enhance daily engineering and incident response tasks. * Analytical Rigor: Strong attention to detail in validating incident data and identifying trends or gaps in response. * DevOps & Architecture Knowledge: Understanding full-stack systems, CI/CD pipelines, caching, scaling, and cloud-native infrastructure. * Metrics & Reporting: Capable of calculating and interpreting key metrics like MTTA (Mean Time to Acknowledge) and MTTR (Mean Time to Resolve). Here are the responsibilities of this role when not tied to active on-call: Post-Incident Review Development * Draft and deliver executive summaries post-incident * Develop and coach teams on blameless postmortems. * Create templates, train facilitators, and help guide root cause analysis (e.g., 5 Whys, fishbone diagrams). * Maintain a central library of learnings and cross-cutting themes. Incident Process Improvement * Actively support engineering teams during incidents by helping diagnose and resolve issues quickly * Navigate and analyze data from observability platforms to make informed inferences about root causes * Analyze the effectiveness of incident response to identify systemic reliability gaps. * Standardize incident response workflows (incident roles, comms, escalation paths). * Create or refine runbooks, incident command frameworks, and severity classification guides. Metrics and Insights * Build dashboards around incident frequency, MTTR, MTTA, and recurrence rates. * Use incident data to drive reliability of OKRs or engineering investments. Tooling & AI Solutions * Partner with engineering teams to identify repetitive or high-impact tasks suitable for automation. * Develop, implement, and continuously improve custom scripts, bots, and AI-driven workflows for monitoring, alerting, and incident triage. * Evaluate and integrate emerging AI/ML technologies to optimize detection, root cause analysis, and reporting. * Ensure all tools and automations are secure, maintainable, and aligned with organizational standards and SRE best practices. * Document and socialize new tools and AI solutions, enabling adoption and knowledge sharing across teams. Cross-Team Collaboration * Collaborate with Engineering Managers and Incident Commanders to gather and validate incident data * Partner with product teams, infra, and leadership to socialize reliability best practices. * Act as a reliability "consultant" to squads that have impactful incidents. * Recommend enhancements to monitoring, alerting, and response processes to reduce future incident impact Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company's needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.

Join a leader in metal additive manufacturing serving the aerospace, defense, and space sectors. We're looking for a Process Engineer to refine and advance metal 3D printing processes from build setup to post-processing. The Additive Manufacturing Process Engineer will play a critical role in advancing metal 3D printing processes, including machine functionality, build quality analysis, and continuous improvement of AM build strategies. Responsibilities include process control, improvements, and ensuring repeatability from print through post-processing. The role also involves providing training and support for AM technicians on proper equipment setup, teardown, and maintenance. This position requires a combination of hands-on AM expertise, leadership skills, and meticulous attention to detail. What You'll Do: Act as process owner for metal additive manufacturing Support the commissioning and operation of additive manufacturing equipment Develop and maintain standard operating procedures, work instructions, checklists, and safety protocols for additive manufacturing Responsible for establishing process flow to meet production rate and quality goals Track machine utilization and drive reductions in planned and unplanned downtime Develop and implement statistical process control into production processes to further improve reliability and reduce cost and lead time Optimize process parameters (laser, gas flow, thermal, powder spreading, etc.) Conduct post print review of hardware Provide AM process expertise to the Engineering team to help drive continuous improvement and successful AM build strategies. Train technicians to safely operate the AM equipment (set-ups, teardown, monitoring, etc.) Conduct root cause analysis on process deviations and defects Lead Continuous Process Improvement efforts to improve AM production flow What You'll Bring to The Table:Qualifications: 3+ years in a similar role as a Process Engineer Engineering Degree required Experience working in a fast-paced environment Strong understanding of AM equipment-especially EOS or SLM systems. Experience working within ISO AS9100/ISO9000 High attention to detail with strong organizational and communication skills. Must be willing to work overtime and weekends as required to support critical milestones U.S. Person (ITAR-compliant) and ability to obtain/maintain a security clearance. Compensation: $100,000 - $160,000 DOELocation: On-site Long Beach, CA

Day to day life has room for improvement. That was our basic thinking when we founded simplehuman in 2000. Our mission is to bring high-performance innovation to basic but essential tasks in our daily routine. Through new technologies, meticulous engineering and an obsession for improvement, we find new and better ways to achieve basic but important daily tasks. About the role simplehuman is seeking an experienced Product Quality Engineer to drive excellence from concept through production. This is a key role in our Quality team that owns product quality planning, testing, and supplier collaboration across our new product introduction (NPI) and continuous product improvement (CPI) programs. Ideal candidate operates with analytical rigor, owns multiple workstreams simultaneously, and drives alignment through clear, influential communication while maintaining a high standard of quality and accountability. This is a fully on-site position based in our Torrance, CA office. Responsibilities Own end-to-end Product Quality Planning (PQP) process, ensuring each new/existing product has clear inspection criteria. Define and implement control requirements across all stages of manufacturing including Incoming (IQC), In-Process (IPQC), Outgoing (OQC), and Quality Audit checkpoints. Ensure mass production quality through statistical analysis and process validation, defining control limits, dimensional tolerances, and key variables that maintain cosmetic and functional consistency across builds. Design and execute pre-production validation testing to verify hardware and software performance, while designing and refining test methods, fixtures, and measurement systems for consistent, repeatable results. Partner across internal engineering, design, and external teams to align quality expectations, resolve yield issues, and report actionable quality insights to support key decisions Own failure analysis and CAPA initiatives to resolve issues, prevent recurrence, and enhance product and process robustness. Lead weekly Quality Improvement efforts and drive continuous product and process improvements with OEM partners. Own quality-critical issue management, ensuring rapid containment & effective corrective implementation. International Travel is required (up to 20%) Qualifications Bachelor's degree in Mechanical, Industrial , or related Engineering field; Master's degree or higher preferred 3+ years of industry experience in quality for one or more of the following areas: product development, plastic parts, injection molding, tooling, jigs, fixtures, or high-volume manufacturing engineering (Consumer Electronics, Automotive, Medical Devices, etc.) Proven experience with high-volume manufacturing and related quality processes Solid understanding of injection molding and sheet metal fabrication Proficiency in SolidWorks, Creo, or Catia, with strong knowledge of GD&T and mechanical drawings Familiarity with quality analysis tools (8D, PFMEA, Fishbone, etc.) and Acceptance Quality Limit (AQL) standards Exceptionally detail-oriented, highly organized, and proactive in driving results Excellent written and verbal communication skills About Us We're a mature company with the soul of a start-up. We value ingenuity, precise communications, fast iteration and scrappiness. Our teams are tight-knit with a work hard, play hard tradition - we take pride in individual and team success and push boundaries to make the best products. And we only build products we love to use ourselves. Great benefits, competitive compensation, and generous simplehuman product discounts.

Amtec is seeking a Process Engineer to work for a manufacturing company located in Anaheim, CA. We are looking for someone with a Lean background within a Manufacturing environment. The ideal candidate will have a lot of drive, won't be afraid to ask questions and will not be afraid to be "hands on" and get dirty! We will consider someone with less than 3 years of experience who wants to learn and advance within his/her career. My client has no problem "grooming" the right person! Qualifications • BS in engineering • 3+ years in an extrusion manufacturing environment • Proven track record in manufacturing process troubleshooting and improvement • Familiarity with quality assurance procedures and general statistics • Proven track record in implementing and instructing personnel in the use of SPC tools to control, validate and improve processes • Excellent communication and interpersonal skills • Self starter with the flexibility to work in multiple roles in a team environment • MS Office literate DESIRED QUALIFICATIONS: • Tooling Design experience • Strong organizational and management skills • Experience in managing technicians and engineers • Experience in using tools such as Six Sigma, DOE and PFMEA Additional Information All your information will be kept confidential according to EEO guidelines.

Dennis Group's Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Develop process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Prepare process flow and piping and instrumentation diagrams Create process flow diagrams Prepare mass and energy balances Size and specify process and process utility equipment Equipment procurement and bid evaluation Assist project management with the development of project scope, budget and schedule for all process related work Help to coordinate the schedules and work of contractors for process equipment installation Work with clients, vendors, and suppliers to develop cost estimates and proposals Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) Oversee process and utility equipment installations Provide onsite construction start-up and commissioning support Research process engineering best practices Supporting talent growth within our organization Required Education Skills and Experience Bachelor's degree in Chemical or Process Engineering. 0-3 years of work experience or schooling developing process designs 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs 0-3 years of work experience or schooling sizing and specifying process and process utility equipment. 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002531

Full-time Description Are you ready to drive innovation and continuous improvement in manufacturing? Join our Walnut, CA team as a Manufacturing Process Engineer and help us deliver exceptional results in a collaborative, fast-paced environment! New graduates welcome to apply! Location: Walnut, CA Annual Salary: $75,000+ (DOE) About The Gund Company At The Gund Company, we are more than a global leader in manufacturing and fabricating engineered material solutions in electrical insulation-we are a vibrant community of innovators, collaborators, and problem-solvers who are passionate about making a difference. With 17 facilities worldwide, we deliver engineered material solutions and custom-fabricated parts, all backed by ISO 9001:2015 certified quality systems and a reputation for exceptional customer service and quality. Position Overview - Manufacturing Process Engineer Optimize manufacturing processes to reduce cycle time, material usage, and process variation Lead work order improvements and update Engineering Master records with best practices Collaborate with Operations, HR, Sales, Service, Production, and Quality/Lean teams to enhance quality, speed, cost / efficiency Support new product development, supplier/material evaluations, and R &D workorders Drive margin improvement through process efficiency and gross profit reviews Standardize processes, create graphical instructions, and train team members Provide hands-on support for equipment, process, and material troubleshooting Manage installation / implementation of new equipment, tools, processes-including operator and customer service training Conduct daily Gemba walks to identify improvement opportunities and foster a culture of continuous improvement Requirements BS in Process Engineering, Industrial Automation, Mechanical Engineering, Industrial Engineering, or related field 4 years process engineering experience, preferred Minimum 2 years of experience improving manufacturing processes, Kaizen, and project management Familiar with CAD, CAM software, CNC equipment Demonstrated success in implementing improvements in production processes Problem solving skills including Lean Tools such as 8D, 5 Why, DMAIC A3 Preferred Skills: Composites fabrication and or composites materials manufacturing experience a plus. Project management experience including creating and using value stream mapping and Gantt Charts Experience and/or Certifications in Lean, Six Sigma, 5S) Some travel may be required Why Join Us? Safe, healthy, and inclusive work environment PTO, paid holidays plus additional paid Sick Time Pet Insurance Tuition Reimbursement Comprehensive, cost-effective benefits: Health, Dental, Vision, Life, Disability 401(k) with 50% employer match (up to 6% of contributions) Employee Stock Ownership Plan (ESOP) Ongoing training and development programs Be part of a company that values your creativity and invests in your future Ready to Make an Impact as a Manufacturing Process Engineer? Apply today and bring your creative vision to The Gund Company-where your ideas drive actual results and your career growth is our priority. The Gund Company is an Equal Opportunity Employer. Reasonable accommodations are available for individuals with disabilities for the role of Manufacturing Process Engineer . Rev: 12182025 RJ VM

Compensation & Benefits: Pay Range: $49,350 - $70,350 Benefits Include: Medical, Dental, Vision Insurance Employer-paid Basic Life Insurance Supplemental Life Insurance 401(k) with Employer Match Generous Paid Time Off (PTO) program 7 Paid Holidays + 1 Floating Holiday ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) Reviewing customer specifications for detailed requirements to set up new processes or establish gaps between current practices and specification requirements. Manage process optimization in regards to tooling, throughput, cost analysis on new/existing packages, and cost reduction on paint. Oversee first article qualification to ensure time optimization, pricing evaluation and proper engineering. Responsible for scheduling all new customer orders/packages. Coordinate with planning for the creation of accurate and detailed work orders for all new and existing orders along with the creation of new technique cards. Perform regular gap analysis of customer specifications for new revisions being released for current established processes. Perform project management to meet required goals and deadlines. Use Statistical Process Control tools (e.g. Failure Mode & Effects Analysis, Pareto, etc.) to evaluate potential risk when setting up new processes or reviewing changes to current processes. Coordinate and collaborate with other project team members to ensure continuous success in meeting required deadlines and product goals. Establish objectives for each individual project assigned to ensure that the team members have a clear understanding of expectations. Schedule required meetings, procure assets required, and communicate with required departments to ensure objectives are met. Create and revise internal processing procedures and quality work instructions for performing quality control tests Other duties as assigned POSITION QUALIFICATIONS Competency Statement(s) •Accountability - Ability to accept responsibility and account for his/her actions. •Change Management - Ability to encourage others to seek opportunities for different and innovative approaches to addressing problems and opportunities. •Communication, Oral - Ability to communicate effectively with others using the spoken word. •Communication, Written - Ability to communicate in writing clearly and concisely. •Conceptual Thinking - Ability to think in terms of abstract ideas. •Conflict Resolution - Ability to deal with others in an antagonistic situation. •Customer Oriented - Ability to take care of the customers' needs while following company procedures. •Delegating Responsibility - Ability to allocate authority and/or task responsibility to appropriate people. •Energetic - Ability to work at a sustained pace and produce quality work. •Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards. •Goal Oriented - Ability to focus on a goal and obtain a pre-determined result. •Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. •Self Motivated - Ability to be internally inspired to perform a task to the best of ones ability using his or her own drive or initiative. •Time Management - Ability to utilize the available time to organize and complete work within given deadlines. •Innovative - Ability to look beyond the standard solutions. •Working Under Pressure - Ability to complete assigned tasks under stressful situations. •Judgment - The ability to formulate a sound decision using the available information. SKILLS & ABILITIES Education: High School Graduate or General Education Degree (GED): Required Associate's Degree (two year college or technical school): Preferred Experience: 3 plus years of experience in chemical processing Computer Skills: Proficient in Microsoft Office and CATIA Other Physical Requirements •Vision (Near, Distance, Color, Depth) •Sense of Sound - able to hear average conversations •Ability to wear Personal Protective Equipment (PPE) - Must wear safety glasses WORK ENVIRONMENT Work is performed in office setting but will be exposed to shop conditions on a regular basis

" The Enterprise Quality Control Processor (EQCP) performs standardized quality control review on key services, processes, and functions to ensure compliance with LERETA's requirements and customer Service Level Agreements (SLA). The position provides timely and accurate quality control reviews and reports to the tax teams, division management, and customers. Quality Control * Tracks and ensures that portions of each department's processes are reviewed by auditors in a timely manner in accordance with LERETA's requirements as well as the customer's quality requirements * Processes include various tasks such as: disbursements, refunds / returned checks, mismatched tax line / temporary tax lines, miscellaneous exceptions, parcel searches and lien tax line data which are also processed by all teams * Applies the appropriate procedures to ensure compliance with departmental and customer contractual requirements * Facilitates timely exchange of information, accurately prepares and distributes reports to appropriate management / departments * Communicates status of assignments and makes recommendations for improving the department's performance to the appropriate supervisor or manager This position will perform other duties as assigned based on the needs of the department. Required Education & Experience * High School Diploma or Equivalent * Basic Microsoft Office Access, Excel, Outlook, PowerPoint and Word skills * Type 35+ wpm * Ability to operate 10-key by touch with accuracy * Minimum of 2-years' experience working with tax service, outsourcing / central services and/or loan servicing, specifically relating to real estate tax processing * Hands-on experience with auditing and/or quality control processes * Advanced experience with processing bills, tasks, manual disbursements, returned/refund checks, miscellaneous exceptions and searching of parcels and lien information Salary Range: $16.96 - $20.00 "

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. **Northrop Grumman Defense Systems** is looking for a **System Safety Engineer** with the ability to obtain a security clearance to work with our talented **Advanced Weapons** team located in **Northridge, CA** . As an integral part of our multi-discipline engineering team in Advanced Weapons, you will be on the forefront of developing next generation solutions to protect technology for our nation's warfighter. The ideal candidate will be supporting our programs for defining and architecting a secured missile weapon system. This position will require close collaboration with team members of other projects within the organization for security architecture designs as well as external partners and customers. **This position requires the selected candidate to work on-site in Northridge, CA. Telework is not available for this position.** Relocation assistance, although not guaranteed, may be available. **What You'll get to Do:** Northrop Grumman Defense Systems sector is seeking a System Safety Engineer with experience in safety engineering processes and standards to join our team of qualified, diverse individuals. This position will be located on-site in Northridge, CA. The qualified applicant will become part of Northrop Grumman's System Safety team within Specialty Engineering. Activities include system safety analysis of military weapon systems, participation in risk assessments/resolution and mishap investigations. The ideal candidate will have experience with MIL-STD-882E and familiarity with Military and their equivalent industry standards such as MIL-STD-882, RCC 319, AFSPCMAN 91-710, ASTM, ANSI, NEC, AFOSH, AOP-52, JOTP-051, PESHE and NFPA. This requisition may be filled at either a Principal Level or a Sr. Principal Level based on the qualifications listed below. **Relocation assistance, while not guaranteed, may be available.** **Basic Qualifications for a Principal System Safety Engineer:** + BS in Electrical Engineering or relevant degree with 5 years of relevant/related experience or a MS in Electrical Engineering or relevant degree with 3 years of relevant/related experience + Familiarity with electrical circuit design/schematics + Experience with application of MIL-STD-882E to analyze, recommend, and drive safety into system design, equipment and procedures in order to mitigate or eliminate hazards + Experience documenting hazards with a closed-loop Hazard Tracking System (HTS) + Possess fundamental knowledge of system safety principles to develop safety documentation such as a System Safety Program Plan (SSPP), Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System/Subsystem Hazard Analysis (SHA/SuSHA), Bent Pin Analyses, Fault Tree Analysis (FTA), Safety Assessment Report (SAR) and Software Safety Analysis in support of customer requirements + Experience with developing, reviewing, updating, and approving system safety artifacts and system safety requirements + History of demonstrated leadership capabilities, ability to work independently, and effectively communicate (verbal and written) with internal and external customers + U.S. citizen with the ability to obtain a Secret DoD Security Clearance within a reasonable period of time to support program needs **Basic Qualifications for Sr. Principal System Safety Engineer:** + BS in Electrical Engineering or relevant degree with 9 years of relevant/related experience or a MS in Electrical Engineering or relevant degree with 7 years of relevant/related experience + Demonstrated ability in the application of MIL-STD-882E to analyze, recommend, and drive safety into system design, equipment and procedures in order to mitigate or eliminate hazards + Experience documenting hazards with a closed-loop Hazard Tracking System (HTS) + Familiarity with electrical circuit design + Demonstrated ability to apply system safety engineering principles to develop safety documentation in accordance with MIL-STD-882E such as SSPP, PHA, FHA, SHA/SuSHA, Bent Pin Analyses, FTA, SAR and Software Safety Analyses + Demonstrated ability to develop, review, update, and approve system safety artifacts and system safety requirements + History of demonstrated leadership capabilities, ability to work independently, and effectively communicate (verbal and written) with internal and external customers + U.S. citizen with the ability to obtain a Secret DoD Security Clearance within a reasonable period of time to support program needs **Preferred Qualifications:** + Ability to read and interpret electrical circuit schematics + Experience with implementing and testing software safety requirements + Have experience in the design of missile systems + Strong working knowledge of military system safety and process standards and their Industry equivalent such as MIL-STD-882, RCC 319, AFSPCMAN 91-710, ASTM, ANSI, NEC, AFOSH, AOP-52, JOTP-051, PESHE, NFPA + Knowledge of System Safety Incident Investigation process + Possess active DoD Security Clearance (investigation completed within last 5 years) Primary Level Salary Range: $110,300.00 - $165,500.00 Secondary Level Salary Range: $137,400.00 - $206,000.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Rotating Equipment Reliability Engineer Job Summary The Marathon Los Angeles Refinery, located in Carson/Wilmington CA, is seeking a Rotating Equipment Reliability Engineer to maintain and improve operational availability, optimize equipment life cycle cost, and achieve best in class reliability. This position supports operating area teams on issues related to rotating equipment and collaborates with other departments daily. The Rotating Equipment Reliability Engineer will support troubleshooting machinery issues, develop project requests, implement new solutions, and lead reliability programs. The schedule for the position is 4 days - 10 hours days - Monday-Thursday - core hour 7 AM - 3:30 PM, after hours calls that can be handled over the phone can occur once a month and support TAR/Major Maintenance events once a year. Key Responsibilities Maintenance and Area Team Support + Serve as a technical resource to the Maintenance Machinery Foreman, Technicians, and Operations to troubleshoot, diagnose, and repair rotating equipment. + Develop and provide training on rotating equipment and support systems for Maintenance and Operations personnel. + Lead site reliability programs and initiatives including Incident Investigations (using RCFA methods), Lost Opportunity Tracking, Pump Seal Reliability Program, PM Optimization, and Area Team Threats Neutralization Program to identify opportunities for improvement and drive solutions. + Leads multi-department investigation teams to solve recurring rotating equipment failures + Submit and approve equipment Preventative Maintenance (PM) plans to ensure compliance with Refinery Standard Practices and reliability initiatives. + Perform equipment condition assessments to determine fitness for service and to develop equipment care and repair plans. Review equipment repair reports from outside shops, provide input on inspection requirements and approve repair plans ensuring compliance with Marathon specifications. + Identify critical equipment spare part requirements and ensure warehouse storage is aligned with the plan. + Identify and maintain a list of obsolete equipment and manages the replacement/upgrade plan. + Interface with MPC Rotating Equipment Advisory Group to share lessons learned and best practices. Engage management to champion specification changes to improve equipment reliability and department efficiency. Projects and TAR Support + Develop Project Request Forms (PRFs) for reliability improvements. + Develop, submit, and ensure MM/TAR scope is well justified, documented correctly, and meets maintenance specifications and industry best practices. + Define expectations and project deliverables related to Mechanical Integrity and reliability requirements, as well as site preferred technologies and methodologies. + Review project documentation, P&ID's, and data sheets to ensure accuracy. + Provide technical support to Major Maintenance (MM) and Turnaround (TAR) execution team, assisting with equipment inspection, QA/QC, and FCO process. Health, Safety, Environmental and Mechanical Integrity Stewardship + Participate in safety walks and field audits on a regular basis. + Serve as a technical resource to the Process Safety Department during Area Team HAZOP reviews. + Lead or support incident investigations to determine root cause and identify corrective actions. + Support MOC process and ensure that technical documentation is maintained per company policy. + Champion Mechanical Integrity program and the Major Equipment Deficiency process with key stakeholders. Personal Development + Maintain a personal development plan and attend training to foster professional development to support career goals. Education, Experience and Skills Minimum Qualifications + Must have Bachelor's degree in Mechanical Engineering. (Education must be obtained/completed prior to start date) + Must have at least 2 years of post degree engineering experience. Experience should be in maintenance, machinery or engineering in a refinery, petro-chemical or other related heavy industry. + Must have experience interpreting and applying industrial and company standards. + Must have strong understanding of Management of Change requirements and process. + Able to understand mechanical systems and cross-section drawings to troubleshoot field equipment. + Able to successfully communicate complex system information across various audiences, from hourly personnel to Refinery management. + Must be proficient in Microsoft: Word, Excel and Outlook. + Must be able to wear appropriate PPE in the refinery (respirator), be able to physically perform all tasks in the field and take hair drug test and physical. + Must have a valid driver's license. (MPC determines valid status.) + Must be legally authorized to work in the US without the need for future VISA sponsorship. + Travel Requirement is less than 5 %. + The schedule for the position is 4 days - 10 hours days - Monday-Thursday - core hour 7 AM - 3:30 PM, after hours calls that can be handled over the phone can occur once a month and support of TAR/Major Maintenance events once a year. Preferred Qualifications + Strong working knowledge of all applicable industry standards for rotating equipment is preferred. + Experience in the operation, maintenance and troubleshooting of rotating equipment such as pumps, turbines, centrifugal compressors, and reciprocating compressors. + Experience with machinery control systems such as anti-surge protection systems, turbine governors and overspeed protection, and performance control software is preferred. + Experience in the use of machinery condition monitoring tools such as Bently Nevada System 1, Emerson CSI, Prognost, and Windrock is preferred. + Experience in the installation of large machinery equipment, including foundation design, grouting, pipe strain, and alignment is preferred. + Working knowledge and application experience of RCM principles, RCFA and FMEA methodology and application is preferred. + Experience utilizing CMMS software. SAP experience is preferred. Relocation may be available. ************************************* This job will posted through January 18, 2026 This position belongs to a family of jobs with increasing responsibility, competency and skill level. Actual position title and pay grade will be based on the selected candidate's experience and qualifications. Learn more about Marathon Petroleum's benefits at ************************** As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Carson CA Refinery Job Requisition ID: 00019816 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 2101 E Pacific Coast Hwy Additional locations: Education: Bachelors (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

At the forefront of the future of connected living, TP-Link's Systems Inc. R&D Center in Irvine, Southern California's innovation hub, spearheads research and development of next-generation networking, IoT smart home products, and software services. Our team of passionate engineers are constantly innovating, engineering solutions that transform the end user experience with simpler, smarter, and more reliable connectivity. We're looking for a passionate and experienced Site Reliability Engineer to join our team and play a crucial role in ensuring our cloud platform's security, Reliability, scalability, and operational excellence. About Us: Headquartered in the United States, TP-Link Systems Inc. is a global provider of reliable networking devices and smart home products, consistently ranked as the world's top provider of Wi-Fi devices. The company is committed to delivering innovative products that enhance people's lives through faster, more reliable connectivity. With a commitment to excellence, TP-Link serves customers in over 170 countries and continues to grow its global footprint. We believe technology changes the world for the better! At TP-Link Systems Inc, we are committed to crafting dependable, high-performance products to connect users worldwide with the wonders of technology. Embracing professionalism, innovation, excellence, and simplicity, we aim to assist our clients in achieving remarkable global performance and enable consumers to enjoy a seamless, effortless lifestyle. Responsibilities: Assist in implementing and operating Microservices on Kubernetes cloud-based platforms. Collaborate with the Cloud Technical Development and DevOps teams to deploy services to the Multi-Cloud Platform. Conduct Load Tests and Chaos Tests to ensure the scalability and reliability of microservices. Build observability for Microservices and cloud platforms like AWS, OCI, Azure, and GCP. Contribute to writing and executing disaster recovery plans in collaboration with the Development and DevOps teams. Help analyze and resolve production risks caused by insufficient resources, such as node groups, CPU, memory, HPA scheduling, JVM pre-warming, etc. Write and maintain scripts for automation using languages like Python, Go, or Bash. Assist in defining and maintaining the KPIs (SLA/SLO/SLI) for all cloud microservices with development teams to better understand the business. Create and maintain technical documentation, including architecture diagrams, design documents, and standard operating procedures. Ensure adherence to security and compliance standards, including ISO27001, SOC2, and GDPR. Participate in incident response efforts to troubleshoot and resolve production issues quickly. Conduct post-incident analysis to identify root causes and potential workarounds/solutions. Contribute to product/technology selection, including implementation of POCs. Be adaptable to change and evolving processes and tools. Participate in mentoring and training less senior members of the team. Be part of the on-call rotation and provide support after work hours and on weekends. Other duties as assigned. Requirements Bachelor's degree in Computer Science, Information Technology, or a related field. 1-3 years of experience as a Site Reliability Engineer or in a related role. Proficiency in programming and scripting languages like Java, Python, Bash, or PowerShell. Hands-on experience in SRE, DevOps, cloud operations, and cloud security best practices. Basic knowledge of security technologies, including Identity and access management, Network security, Application security, and Data protection. Strong problem-solving and analytical skills, with the ability to work independently and as part of a team. Experience in developing and maintaining technical documentation and implementing compliance requirements. Additional Skills (Preferred): Relevant cloud certifications include AWS Solutions Architect, Azure Solutions Architect Expert, or GCP Professional Cloud Architect. Experience with container orchestration technologies (e.g., Kubernetes) Benefits Salary range: $100,000 - $140,000 Free snacks and drinks, and provided lunch on Fridays Fully paid medical, dental, and vision insurance (partial coverage for dependents) Contributions to 401k funds Bi-annual reviews, and annual pay increases Health and wellness benefits, including free gym membership Quarterly team-building events At TP-Link Systems Inc., we are continually searching for ambitious individuals who are passionate about their work. We believe that diversity fuels innovation, collaboration, and drives our entrepreneurial spirit. As a global company, we highly value diverse perspectives and are committed to cultivating an environment where all voices are heard, respected, and valued. We are dedicated to providing equal employment opportunities to all employees and applicants, and we prohibit discrimination and harassment of any kind based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Beyond compliance, we strive to create a supportive and growth-oriented workplace for everyone. If you share our passion and connection to this mission, we welcome you to apply and join us in building a vibrant and inclusive team at TP-Link Systems Inc. Please, no third-party agency inquiries, and we are unable to offer visa sponsorships at this time.

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Details: Join a leader in metal additive manufacturing serving the aerospace, defense, and space sectors. We're looking for a Process Engineer to refine and advance metal 3D printing processes from build setup to post-processing. The Additive Manufacturing Process Engineer will play a critical role in advancing metal 3D printing processes, including machine functionality, build quality analysis, and continuous improvement of AM build strategies. Responsibilities include process control, improvements, and ensuring repeatability from print through post-processing. The role also involves providing training and support for AM technicians on proper equipment setup, teardown, and maintenance. This position requires a combination of hands-on AM expertise, leadership skills, and meticulous attention to detail. What You'll Do: Act as process owner for metal additive manufacturing Support the commissioning and operation of additive manufacturing equipment Develop and maintain standard operating procedures, work instructions, checklists, and safety protocols for additive manufacturing Responsible for establishing process flow to meet production rate and quality goals Track machine utilization and drive reductions in planned and unplanned downtime Develop and implement statistical process control into production processes to further improve reliability and reduce cost and lead time Optimize process parameters (laser, gas flow, thermal, powder spreading, etc.) Conduct post print review of hardware Provide AM process expertise to the Engineering team to help drive continuous improvement and successful AM build strategies. Train technicians to safely operate the AM equipment (set-ups, teardown, monitoring, etc.) Conduct root cause analysis on process deviations and defects Lead Continuous Process Improvement efforts to improve AM production flow Details: What You'll Bring to The Table:Qualifications: 3+ years in a similar role as a Process Engineer Engineering Degree required Experience working in a fast-paced environment Strong understanding of AM equipment-especially EOS or SLM systems. Experience working within ISO AS9100/ISO9000 High attention to detail with strong organizational and communication skills. Must be willing to work overtime and weekends as required to support critical milestones U.S. Person (ITAR-compliant) and ability to obtain/maintain a security clearance. Compensation: $100,000 - $160,000 DOELocation: On-site Long Beach, CA

Amtec is seeking a Process Engineer to work for a manufacturing company located in Anaheim, CA. We are looking for someone with a Lean background within a Manufacturing environment. The ideal candidate will have a lot of drive, won't be afraid to ask questions and will not be afraid to be "hands on" and get dirty! We will consider someone with less than 3 years of experience who wants to learn and advance within his/her career. My client has no problem "grooming" the right person! Qualifications • BS in engineering • 3+ years in an extrusion manufacturing environment • Proven track record in manufacturing process troubleshooting and improvement • Familiarity with quality assurance procedures and general statistics • Proven track record in implementing and instructing personnel in the use of SPC tools to control, validate and improve processes • Excellent communication and interpersonal skills • Self starter with the flexibility to work in multiple roles in a team environment • MS Office literate DESIRED QUALIFICATIONS: • Tooling Design experience • Strong organizational and management skills • Experience in managing technicians and engineers • Experience in using tools such as Six Sigma, DOE and PFMEA Additional Information All your information will be kept confidential according to EEO guidelines.