Reliability engineer jobs in Highlands Ranch, CO - 268 jobs

In addition to the responsibilities listed below, this position is responsible for performing standard corrective repairs, preventive maintenance, and acceptance testing on all medical instrumentation; ensuring medical instrumentation is calibrated at the appropriate interval with supervision from a manager; and performing installations of standard medical instrumentation. Essential Responsibilities: Pursues effective relationships with others by sharing resources, information, and knowledge with coworkers and members. Listens to, addresses, and seeks performance feedback. Pursues self-development; acknowledges strengths and weaknesses based on career goals and takes appropriate development action to leverage / improve them. Adapts to and learns from change, challenges, and feedback; demonstrates flexibility in approaches to work. Assesses and responds to the needs of others to support a business outcome. Completes work assignments by applying up-to-date knowledge in subject area to meet deadlines; follows procedures and policies, and applies data and resources to support projects or initiatives with limited guidance and/or sponsorship. Collaborates with others to solve business problems; escalates issues or risks as appropriate; communicates progress and information. Supports the completion of priorities, deadlines, and expectations. Identifies and speaks up for ways to address improvement opportunities. Ensures that documentation is adequately maintained by: documenting ones action (e.g., maintenance, repairs, part replacement) in the centralized maintenance management system with minimal guidance and monitoring; documenting standards, procedures and protocols for all major processes and upholding all standards with limited oversight; and maintaining adequate parts of inventory for medical devices and software with limited oversight. Conducts ongoing preventative maintenance of medical equipment by: performing routine inspections and functionality tests of standard medical equipment (e.g., integrated, interoperable) medical devices and software with some direction; assisting with scheduled preventative maintenance of medical equipment and software (e.g., replacing parts) while exercising judgement and discretion; responding to straight forward requests for maintenance that may require judgment and discretion; and maintaining basic awareness of the status of ongoing preventative maintenance activities, problems, and concerns. Minimum Qualifications: Associates degree or vocational certificate in Electronic Service, or related field AND Minimum one (1) year of experience in medical technology field service with medical devices and systems or a directly related field OR Minimum two (2) years of experience in technology field service, or a directly related field. Additional Requirements: Preferred Qualifications: One (1) year of experience in field service of medical instrumentation. Certificate of Vendor Training involving directly related systems. Primary Location: Colorado,Aurora,Central Support Scheduled Weekly Hours: 40 Shift: Day Workdays: Mon, Tue, Wed, Thu, Fri Working Hours Start: 07:30 AM Working Hours End: 04:00 PM Job Schedule: Full-time Job Type: Standard Worker Location: Onsite Employee Status: Regular Employee Group/Union Affiliation: NUE-PO-01|NUE|Non Union Employee Job Level: Individual Contributor Department: Central Support Services - Clinical Tech Repair Depot - 0308 Pay Range: $34.9 - $45.16 / hour Kaiser Permanente is committed to pay equity and transparency. The posted pay range is based on possible base salaries for the role and does not include the value of our total rewards package. Actual pay determined at offer will be based on years of relevant work experience, education, certifications, skills and geographic location along with a review of current employees in similar roles to ensure that pay equity is achieved and maintained across Kaiser Permanente. Travel: No On-site: Work location is on-site (KP designated office, medical office building or hospital). Worker location must align with Kaiser Permanente's Authorized States policy. Kaiser Permanente is an equal opportunity employer committed to fair, respectful, and inclusive workplaces. Applicants will be considered for employment without regard to race, religion, sex, age, national origin, disability, veteran status, or any other protected characteristic or status. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Splunk, a Cisco company, is building a safer and more resilient digital world with an end-to-end full stack platform made for a hybrid, multi-cloud world. Leading enterprises use our unified security and observability platform to keep their digital systems secure and reliable. Come help organizations be their best, while you reach new heights with a team that has your back. **Meet the Team** Splunk, a Cisco company, is building a safer, more resilient digital world with an end-to-end, full stack platform designed for hybrid, multi-cloud environments. Join the FedRAMP team where you will be a part of one of the largest and most sophisticated cloud-scale, Bigdata, and microservices platforms in the world. You will be working with engineers who operate highly available, scalable, and cost-efficient applications with low operational burden by handling and improving the reliability and resiliency of services and infrastructure. You thrive driving initiatives on automation, infrastructure-as-code, reliability engineering, and getting rid of tedious, manual tasks. **Your Impact** Splunk's FedRAMP SRE team is looking for a Site Reliability Engineer to help lead, design and build the next generation of our large scale cloud offering. You will be working on core services and applications that form the primitives for our current and future cloud service offerings. Site Reliability Engineers in this role will be engaging with multiple service owners across the platform to teach and implement modern interpretations of SRE, observability, Chaos Engineering and DevOps. This role is highly visible and impactful to the organization and will help shape Splunk's Engineering culture for years to come. Your job, in a nutshell, is to make every team around you better... including your own! **You will:** + Own Splunk Cloud in FedRAMP environments. + Work across the organization to deliver quality products that delight Splunk's passionate users. + Work with teams of tight-knit engineers who are building a state-of-the-art, cloud-based environment for massive-scale data processing. **Minimum Qualifications** + You have experience or an interest in working with regulated computing environments such as FISMA and/or FedRAMP and are enthusiastic about doing it better. + You have worked with Kubernetes, EKS, GKE or AKS and the associated ecosystems. Kubernetes certifications or an interest in obtaining these certifications are a plus, such as those from the Cloud Native Computing Foundation; Certified Kubernetes Administrator (CKA), Certified Kubernetes Application Developer (CKAD), or Certified Kubernetes Security Specialist (CKS). + You have a good understanding of linux systems (network stack, file system, OS services) and networking (L2 vs. L3, network architecture, VLANs, etc) + Experience with at least one programming language, preferably golang (go) or python. Knowledge of working with and automating linux systems tasks using this language is required, including working with configuration files and system services. Knowledge of common data structures and algorithms, as well as their performance characteristics is required. + Skilled in identifying performance bottlenecks, identifying anomalous system behavior, and resolving root cause of service issues. **Preferred Qualifications** + Experience monitoring cloud environments with Splunk. + Experience with development and deployment in a hosted cloud environment, preferably AWS, Azure or GCP. Cloud certifications are a plus or an interest in obtaining these certifications, such as AWS Certified Solutions Architect, AWS Certified DevOps Engineer, or Google Associate Cloud Engineer (ACE). + Experience with large scale distributed cloud service development, infrastructure, traffic management and architecture. + Experience with distributed architectures/systems with optimized and scalable software that operates on a large number of nodes. **Why Cisco?** At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. **Message to applicants applying to work in the U.S. and/or Canada:** The starting salary range posted for this position is $126,500.00 to $182,000.00 and reflects the projected salary range for new hires in this position in U.S. and/or Canada locations, not including incentive compensation*, equity, or benefits. Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: + 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees + 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco + Non-exempt employees** receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees + Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) + 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next + Additional paid time away may be requested to deal with critical or emergency issues for family members + Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: + .75% of incentive target for each 1% of revenue attainment up to 50% of quota; + 1.5% of incentive target for each 1% of attainment between 50% and 75%; + 1% of incentive target for each 1% of attainment between 75% and 100%; and + Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $152,500.00 - $252,000.00 Non-Metro New York state & Washington state: $135,800.00 - $224,400.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. ** Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements. Cisco is an Affirmative Action and Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, genetic information, age, disability, veteran status, or any other legally protected basis. Cisco will consider for employment, on a case by case basis, qualified applicants with arrest and conviction records.

Basic Qualifications Bachelor's degree in Computer Science, a related field or equivalent experience is required plus a minimum of 5 years of relevant experience; or Master's degree plus 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense TS/SCI security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position "Sign On Bonus Available." GDMS OFFERS RELOCATION BENEFITS FOR THIS POSITION. ROLE AND POSITION OBJECTIVES: As a site reliability engineer for GDMS's Space and Intelligence Systems line of business, you'll be a member of a cross functional team responsible for maintaining survivability and reliability of mission critical resources. We encourage you to apply if you have any of these preferred skills or experiences: Ensuring Uptime of Critical Systems Automating Systems Administration Activities Configuring, Monitoring, and Troubleshooting Enterprise Services Experience administrating Linux systems Infrastructure as Code Policy as Code Configuration as Code Linux scripting What sets you apart: Creative thinker with demonstrated success ensuring system uptime Collaborative team player eager to provide technical leadership and position others for success Thorough knowledge of technology trends and willingness to champion new ideas and process improvements Strong presentation and communications skills with experience in the art of negotiation and the ability to meet challenging customer requirements with win-win solutions Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is flex but requires at least 2-3 days per week of onsite support at Buckley Space Force Base in Aurora, CO. #CJ3 #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $105,814.00 - USD $114,494.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance **Security Clearance:** TS/SCI - Current At **Raytheon** , the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. + **Life Cycle Engineering (LCE)** is responsible for ensuring our products are Safe, Reliable, Usable, Maintainable and delivered on time. LCE consists of multiple specialty disciplines that influence the design and architecture of Raytheon products. + Our LCE resources interface directly with program leadership, technical leadership, and our customers throughout the total life cycle of our products from conception to deactivation. + Our engineers provide subject matter expertise in the following engineering disciplines: Reliability, Availability, Maintainability, Testability, System Safety, Human Factors, and Supportability. **What You Will Do:** + This is an exciting opportunity for a highly motivated **Senior System Safety Engineer** to join us **onsite** in a closed area program with the LCE Safety Engineering Team. + As a **Senior System Safety Engineer** , your responsibilities will include: + Developing and implementing one or more MIL-STD-882E compliant system safety programs + Performing MIL-STD-882 System Safety Program tasks and analyses, involving management (task series 100), analysis (task series 200), evaluation (task series 300), and verification (task series 400). + Working across all integrated product teams and lines to properly eliminate hazards or provide effective controls. + Coordinating with customer safety representatives applying methods, standards, and techniques to provide clarification of system requirements to software, hardware, and test personnel to ensure design and architecture considerations are appropriately allocated to the system and horizontally integrated across the development teams. + Collaborating with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds. + Performing System Safety planning, hazard analyses, and design analyses + Briefing safety considerations at technical reviews and as part of the safety approval process + Interpreting system requirements, customer specifications and military standards + Preparing internal and customer reports describing various analyses relevant to the System Safety program + Collaborating across multiple disciplines to gain a full understanding of product architecture and design + Interfacing with other engineering functions: Systems Engineering, Software or Firmware Engineering, Electrical Engineering, Hardware Engineering + Managing System Safety Working Group(s) between key Raytheon and Customer representatives + Ability to work on Special Access Program(s) + **This position is posted as ONSITE and based at Aurora, CO.** **Qualifications You Must Have:** + Typically Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and a minimum of 5 years of relevant experience. An advanced degree may account for additional years of experience as required for this position. + Experience with Safety Engineering, Systems Engineering, Software Engineering, Electrical or Firmware Engineering. + Active and transferable U.S. government issued Top security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance **Qualifications We Prefer:** + Experience with DoD System Safety Programs e.g. MIL-STD-882 + Experience with system and software safety implementation in Agile Development environment + Experience interfacing with Human Systems Integration showcasing execution of Human Factors Engineering tasking involving MIL-STD-1472. + Experience with Earned Value Management Systems (EVMS) and Proposal Development + Experience with Engineering Change Proposals, Engineering Review Boards, System Safety Working Groups **What We Offer** + Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. + Relocation Eligibility **Learn More & Apply Now!** Please consider the following role type definition as you apply for this role. + **_Onsite_** _: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products._ + This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State (*********************************************** + **About our Locations:** Aurora, CO: ************************************************************* **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: TS/SCI - Current At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. System Safety is responsible for ensuring our products are safe for the customer to use in any environment that they are needed. We work from the start of a program through its full life cycle. Our input in the design phase are critical to ensuring the end user is safe while using our product. What You Will Do: This is an exciting opportunity for a highly motivated Principal System Safety Engineer to join us on the Air and Space team in Aurora Colorado. As a Principal System Safety Engineer, your responsibilities will include: Analysis of engineering hardware, mechanical and electrical drawings and schematics assessing for fault tolerance, latent hazards, and safety requirements compliance. Work with system test and tactical operation and maintenance procedures to ensure the proper administrative system safety controls are in place. Work across all integrated product teams and lines to properly eliminate hazards or provide effective controls. Collaborating with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds Performing System Safety Program or Design analyses Working with a large system safety program or multiple mid-sized safety programs, including: Monitoring program technical execution, Interfacing with stakeholders (e.g. customers, program offices, subcontractors, vendors) Preparing Safety Assessment Reports and Safety Program Briefs for Customer Approval Briefing safety of the program at technical reviews and as part of the safety approval process Interpreting system requirements, customer specifications and military standards Preparing internal and customer reports describing various analyses relevant to the System Safety program Collaborating across multiple disciplines to gain a full understanding of product architecture and design This position is posted as ONSITE and can be based at Raytheon's Dulles Virgina location. Qualifications You Must Have: Typically Requires: Bachelor's degree in Science, Technology, Engineering or Math (STEM) and a minimum of 8 years of relevant Systems Engineering or Safety Engineering experience. An advanced degree may account for additional years of experience as required for this position. Experience with: System Safety Engineering, Systems Engineering, Software or Firmware Engineering, Electrical Engineering or equivalent Safety Engineering. Active U.S. government issued TS/SCI security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Qualifications We Prefer: Experience with DoD System Safety Programs e.g. MIL-STD-882 Experience with system and software safety implementation in Agile Development environment Experience with Earned Value Management Systems (EVMS) and Proposal Development Master's degree in science, Technology, Engineering or Mathematics (STEM) What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligible Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State About our Locations: Aurora, CO: ************************************************************* As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Reports to the Process Engineering Manager: This position's primary focus is to provide process engineering support and optimization assistance for MPLX's facilities including supporting operations in troubleshooting, process modeling, and PHAs. This person will collaborate with business development, engineering, operations, and the capital projects groups to develop, evaluate, and advance projects. All work will be performed in compliance with company standards, procedures, and government requirements. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. The actual position title and pay grade will be based on the selected candidate's experience and qualifications. KEY RESPONSIBILITIES: · Work closely with Operations and Business Development to troubleshoot process related bottlenecks. · Provide process support for facility startups and shutdowns. (Planned and Unplanned) · Generate monthly KPI (Key Process Indicators) reports for facilities. · Provide process support for PHAs and LOPAs of facilities. · Assist Operations in the development and review of CPVs, SOLs, and Operating Procedures. · Provide process engineering support for root cause failure analysis of equipment, instrumentation, and process controls. · Participates in the development and review of new G&P standards including engineering, operations, PSM, environmental, and health and safety. · Must be able to handle assignments and projects with minimal supervision and complete within acceptable time standards. · Travel expected up to 33% based on location. Other MPLX locations may be considered. EDUCATION AND EXPERIENCE: REQUIRED: · Bachelor's Degree in Engineering from an accredited College or University · Minimum of 3 years of Process Engineering experience · Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) · Valid Driver's License · Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. PREFERRED: · Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) · Chemical Engineering degree · PE License · Broad process knowledge of compressor stations, natural gas cryogenic processing facilities, and light end fractionation processes. · 7+ years in the oil & gas, chemical, pharmaceutical, or manufacturing industry SKILLS: Must have excellent verbal and written communication skills to effectively communicate with all levels of individuals/employees. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Midland, Texas Job Requisition ID: 00020052 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 600 N Marienfeld St Ste 450 Box 140 Additional locations: Bridgeport, West Virginia, Cadiz, Ohio, Canonsburg, Pennsylvania, Carlsbad, New Mexico, Denver, Colorado Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

"What's it like to work at Agilent in Manufacturing? Watch the video" Agilent inspires and supports discoveries that advance the quality of life. We provide life science, diagnostic and applied market laboratories worldwide with instruments, services, consumables, applications and expertise. Agilent enables customers to gain the answers and insights they seek -- so they can do what they do best: improve the world around us. Information about Agilent is available at **************** Want to take your knowledge and experience further? Ready to provide technical leadership and make key decisions? This is your opportunity - not only to join a committed, professional, and forward-thinking team but also to lead in the design and implementation of complex manufacturing processes and transform broad concepts into structured results-focused projects. Join a growing team with this exciting new opportunity for an Process Engineer at our Boulder, Colorado GMP facility. Work in our dynamic, fast-paced, API-Biopharma manufacturing environment with the ability to contribute to the growing industry of oligonucleotide (DNA-RNA) based therapeutics. Responsibilities may include but are not limited to: Provide project/process engineering support of a GMP manufacturing process (Upstream, Midstream, Downstream, Utilities). Responsible for any area of focus with the existing manufacturing process. Area of focus will also be supported during projects. Supporting small to large sized capital projects throughout all phases of the project lifecycle, including the development of user requirement specifications, process design integration, equipment and instrumentation specification/selection, equipment procurement, installation, commissioning, qualification, and turn-over to manufacturing. Participate with project management through coordination of multi-disciplinary teams. Collaborate with Chemical Development and Manufacturing Services groups with activities such as technical transfer and scale-up of processes into manufacturing. Collaborate and facilitate project EHS activities including Process Hazard Analysis, Safety Checklist, and PSM compliance to meet OSHA standards. Ensure for all projects a high level of cGMP compliance to meet the ICH requirements for pharmaceutical buildouts. Support Validation activities including review of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols and participating in FAT/SAT execution, review of installation, operational, and performance qualification (IQ/OQ/PQ) protocols, participating in IOPQ execution, and review of final reports. Support regulatory activities including writing, review, and/or resolution of Change Controls (CC/CSC), Corrective and Preventive Actions (CAPAs), and audit responses. Integrate with Manufacturing and Quality Assurance groups with day-to-day troubleshooting and maintenance activities for projects/process, through identification of process improvement and optimization opportunities, including review of SOPs and MBRs. Perform job functions and responsibilities independently and with limited direction. Leads the development, design of new product/ process technology advancements; is the key technical contributor. Solves complex, high impact design/ development problems. Qualifications Bachelor's or Master's Degree in Mechanical, Electrical, or Chemical Engineering or equivalent education/experience. 4+ years of combined experience in pharma/biopharma and fine chemicals industry to include 3+ years of experience with process and instrumentation diagrams, facility layouts, equipment sizing calculations, user requirement specifications (URSs), standard operating procedures (SOPs) and process troubleshooting. Preferred Skills: 2+ years of experience supporting small to large-sized projects through all phases, including architectural and engineering design, design review, process safety management, process hazard analysis, equipment procurement, installation, commissioning, and qualification, is desirable. Self-motivated, hands-on problem solver with the ability to work within multi-disciplinary teams, including process development, manufacturing, validation, quality, safety, and project management personnel. Familiarity with current ASME BPE sanitary piping and equipment design standards, electrical standards such as National Fire Protection Association / National Electrical Code (NFPA 70 / NEC) and International Fire and Building Codes. Project Management experience in biopharma. Experience with design and programming of industrial control systems, including SCADA, PLCs, and BAS and validation documentation, including installation, operational and performance qualification (IQ/OQ/PQ) protocols. Engineering, communication, and organizational skills to support the safe, efficient, and compliant production of API within a fast-paced, dynamic, contract manufacturing facility. #LI-DT1 Additional Details This job has a full time weekly schedule. Applications for this job will be accepted until at least November 10, 2025 or until the job is no longer posted.The full-time equivalent pay range for this position is $103,200.00 - $161,250.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit *************************************** Required: 10% of the TimeShift: DayDuration: No End DateJob Function: Manufacturing

Job DescriptionElectro-Mechanical Reliability Technician (Food Processing) Note: You must enable text messaging in this program in order to answer the required screening questions. About the Role Imagine starting your shift in Denver, Colorado with a quick huddle, grabbing your tools, and heading to the production floor where your craftsmanship keeps people and equipment moving safely. One hour you might be calibrating a pneumatic control, the next you're diagnosing an electrical circuit, and by mid-morning you're in a boom lift checking a utility system-all to ensure our products are processed to Superior Farms' standards and in alignment with USDA rules, regulations, and requirements. Position Details Company: Superior Farms Location: Denver, Colorado Reports To: Maintenance Manager Job Type: Full-time, on site Shifts Available: early morning (4 AM), morning (7 AM), and late morning (8 AM) Pay Rate: $24.00 - $26.00 per hour depending on experience FLSA Status: Hourly,** **Non-Exempt What You'll Do Your day centers on keeping our facility operating at peak performance: Execute both minor and complex repairs across buildings and production equipment, partnering with senior technicians for major projects. Perform scheduled preventive maintenance-inspect belts, check fluid levels, replace filters, grease bearings and seals, and swap out worn parts. Calibrate and repair pneumatic systems to keep processes precise. Install, repair, and replace electrical wiring, control circuits, switches, and refrigeration components, including work tied to remodeling and new electrical services. Use and operate forklifts, electric pallet jacks, and boom lifts safely in support of maintenance tasks. Handle facility upkeep such as windows, doors/locks, closets, window blinds, drywall/plaster repairs, and painting. Operate computer-based systems that monitor and control mechanical and utility equipment. Respond to urgent maintenance calls to minimize downtime. Maintain daily/weekly/monthly PM checklists and accurate records of all scheduled work. What You BringMinimum Experience/Education High school diploma or GED, or one year of related experience/training. At least one year of forklift experience. Background in building and mechanical equipment maintenance/repair, or an equivalent blend of education and experience. Proficiency with hand and power tools. Knowledge, Skills, and Abilities Foundational skills across welding, plumbing, electrical, control circuits, PLCs, pneumatics, software, hydraulics, carpentry, motors, pumps, and utility equipment operation/repair. Strong attention to detail, clear communication, and diligent follow-up. Ability to read and understand simple instructions, short memos, and correspondence; write simple correspondence; and communicate effectively one-on-one and in small groups. Math proficiency: add/subtract/multiply/divide using whole numbers, fractions, and decimals; compute rates/ratios/percentages; interpret drawings and schematics. Understanding of how a production facility operates. Organized multitasker with accurate counting skills and sound judgment, problem solving, and common-sense thinking. Comfort working in a range of temperatures; basic understanding of GMPs and HACCP. Ability to work early hours, with overtime, weekends, and holidays as needed (not guaranteed). Bilingual Spanish/English preferred; must be able to read and write English. Computer skills preferred for maintenance roles. Physical Demands Standing/Walking: Frequently for 8-12 hours per day. Sitting: None. Lifting/Carrying: Frequent lifting from 1-100 lbs; some projects may exceed 100 lbs using both arms. Pushing/Pulling: Frequent; moving items up to 100 lbs with both arms. Bending: Frequent; self-paced with attention to body mechanics. Kneeling/Crouching/Crawling: Frequent. Reaching/Handling: Frequent; handling varied box sizes and reaching shelves, pallets, and forklift forks. Climbing: Occasional; in/out of trucks, racks, and pallets. Driving: Frequent; forklift and pallet jack. Work Environment Expect frequent exposure to moving mechanical parts and occasional exposure to wet/humid conditions, cold temperatures, heights, airborne particles/fumes, chemicals, outdoor weather, electrical shock risk, and vibration. Noise levels range from moderate to occasionally loud. Benefits ESOP Shares 401(k) match Dental insurance Health insurance Vision insurance Major holidays Vacation time Sick Time Who We Are Superior Farms is employee-owned and a leader in American lamb. We pair sustainable practices with innovative processing to deliver the mouthwatering quality today's consumers expect. “Farm to fork” isn't a tagline-it's how we operate.

AMP is applying AI-powered sortation at scale to modernize the world's recycling infrastructure and maximize the value in waste. AMP gives waste and recycling leaders the power to harness AI to reduce labor costs, increase resource recovery, and deliver more reliable operations. With hundreds of deployments across North America, Asia, and Europe, AMP's technology offers a transformational solution to waste sortation and changes the fundamental economics of recycling. Headquartered in Louisville, Colorado, the Denver Post and BuiltIn Colorado have recognized AMP as one of the state's top workplaces. AMP has operations and career opportunities outside of Atlanta, Cleveland, Portsmouth, Virginia, and Europe. We're fostering an environment where passionate individuals can grow and create impact. We seek unconventional thinkers to join our mission to enable a world without waste; at AMP, your contributions have meaning and can spur change. With backing from top-tier investors and national recognition including North American Cleantech Company of the Year, we're always seeking ways to better our operations, raising the bar on innovation, and looking to collaborate and improve in what we do. Learn more at AMPSortation.com. AMP is hiring a Facility Process Engineer reporting to the Process Engineering Manager who can be 100% ONSITE in AMP's newest single stream facility in Commerce City, Colorado. The primary objective of this role will be the timely execution of commission and ramp responsibilities - leading to the standardized and reliable operation of the Denver, Colorado facility. After successfully meeting contractually obligated performance requirements, the role will pivot to a reliability focus, acting as the on-ground AMP technology and process subject matter expert for commercial, engineering, and operations groups. This role will be responsible for empowering onsite resources to consistently meet production KPIs through AMP technology training, facility configuration optimization, regular facility software updates, and proactive + continuous performance monitoring. The ideal candidate will have a diverse background in process engineering and/or field engineering, experience performing facility scale validation testing, a history of working with production operators, and demonstrated examples of data-backed decision making in a process engineering environment. The candidate should also have hands-on experience with mechanical equipment, hydraulics, motors & other rotating equipment. Any experience with industrial robotics, preventative maintenance, or reliability engineering is also considered transferable. As our Facility Process Engineer, you will: Be in a 6 Month Training Program prior to the Denver, Colorado facility installation, work with onsite operation staff in Norfolk, VA to optimize the Portsmouth MSW facility and in the process become familiar with AMP ONE technology. Execute time study analysis of standard work to drive operational efficiencies. Becoming the technical leader on AMP technology and being the escalation point for onsite operations. Driving facility improvement to design engineering and own the improvement from requirement gathering to field execution. With assistance from the Process Engineering team and the Process Engineering Manager, execute commission, startup, and ramp of the Denver, Colorado facility. Execute both Software Acceptance Testing and Functional Acceptance Testing procedures for successful plant startup. From off-site device commissioning to breaking ground, remain onsite and/or at the point of equipment production to ensure all pre-commission tasks are completed with 0 onsite rework required. Drive lessons learned from each startup back to the Process Engineering Manager, for distribution to the design engineering, asset deployment, and operations groups. Facilitate the transition from startup to typical operations through training plant operators and facility staff on preferred process conditions and equipment operation (feeds, speeds, and configurations). Work with Engineering and Facilities Operations groups to execute facility reliability and improvement plans - deriving plant specific configuration standards. Perform before and after configuration change analysis - validating and verifying process specific performance parity or improvement across varying infeed compositions and characteristics. Create and/or execute test plans and analysis - with the goal of consistently meeting facility level recovery rate, throughput, and uptime requirements. Facilitate execution and communication of any/all AMP tech MOC processes (management of change) - ensuring smooth transition of changes across operators and operational leadership. Coordinate and perform full system and equipment specific performance audits, validating AMP AI and executing on customer reporting requirements. Train facility personnel on the operation of AMP developed equipment and act as a Tier 2 resource for plant failure escalations. Act as the operational expert in core AMP sorting technologies and serve as a technical escalation resource within the plant - assisting facility personnel in troubleshooting internal AMP equipment and 3rd party vendor equipment. Create facility operational collateral (documentation and videos) for training new plant managers and operators on standardized AMP theory of operations. Train operators and maintenance staff on function and troubleshooting associated with the AMP's custom facility control system and AMP sortation equipment. Present AMP standardized processes to new AMP facility teams as designated by Facility Ops (such as infeed management, tip floor expectations, and data tracking expectations). With the assistance of the Process Engineering Manager and software teams, develop and action on standardized machine performance reporting, alerting, and alarming. Approach performance reporting from a proactive posture, creating systems and processes to see and mediate onsite issues before they occur. As the highest-level technical resource on the ground in AMP's newest facility, this role is pivotal to the continued success of the AMP One facilities business. This role will develop knowledge and expertise uniquely available to personnel local to the achieved success and lessons learned within a cutting-edge waste processing facility. Depending on the candidate and project success, it is reasonable to assume this role grows to incorporate responsibilities across multiple AMP One facilities. Prior to the installation of the Commerce City, Colorado facility this position should expect to be 100% ONSITE at AMP's first of its kind municipal solid waste facility in Norfolk, VA. Supervisory Responsibilities: None The successful candidate will have: Required: 3+ years' experience in a process, controls, or field engineering role Startup Experience - SAT (Software Acceptance Testing) and FAT (Functional Acceptance Testing) - creating and execution. Experience in a manufacturing environment Demonstrated examples of real-world data analysis, process performance testing, and system validation testing - production of technical reports and test plans for management level decision making and review. Demonstrated ability at performing mechanical and/or electrical field modifications, onsite fabrication, hands on experience with rotating mechanical, hydraulic equipment, and controls/sensors (preferably conveyors, balers, reducers, etc). Maintenance experience is considered transferable Experience with standard process improvement methodologies (ie. lean, six sigma, etc) Preferred: 1+ years' experience as a lead operator and/or significant interaction with process operators. Experience participating in and leading formalized root cause analysis exercises. Hands on experience commissioning and calibrating industrial robotics. Grafana or other data historian/database experience (SQL based) Examples of technical writing Networking exposure - TCP/IP networking (routing & switching, VPNs, managing VPCs, running and interpreting packet captures) Experience with a wide variety of both batch and continuous process controls (chemical, Petrochemical, pharmaceutical, etc.). Interest in/experience with Machine Learning/Artificial Intelligence and/or robotics Ability to read and/or write any adjacent, modern, coding language Facility operation experience Knowledge of waste industry incentives and experience working in waste industry facilities or waste industry adjacent facilities. Education: Bachelor's Degree in any engineering discipline Salary & Compensation Information: $102,000 - $112,000 per year. Equity Grant: The candidate selected for this role will be recommended for a stock option grant commensurate with the position and the candidate's qualifications. Working Conditions/Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, use hands and fingers, handle or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl and talk and hear. The employee must occasionally lift and/or move up to 45 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus, and ability to accurately see and label color. Working Location(s): 4150 East 60th Avenue, Commerce City, CO 80022 Travel Requirements: Initial 6 months will require candidates to partake in a training program to familiarize them with AMP technology and current facility operations. This candidate will be part of an onsite training program, fulltime located in the Norfolk, VA area. Once the Denver facility is operational, travel is expected to be 25% or less, traveling primarily for knowledge sharing and/or resource cover down scenarios at other facilities. Benefits Information: Medical - The company covers up 77% to 100% of the premium for Cigna medical healthcare plans depending on the selection. Employees pay the difference in premium if they select a more expensive plan. Up to 75% for dependents. Dental, Vision, Short- and Long-Term Disability Life Insurance: The company covers the cost of Basic Life / AD&D 1 x Salary, option to purchase additional through New York Life Benefits start the day you start HSA Eligible Health Plans, Employer Monthly Contributions on Dependent and Individual Plans 401(k) retirement plan (non-matching) FTO - Flexible Time Off 6 Accrued Sick Days Eight (8) paid holidays We'll consider applications on an ongoing basis.

Job Description AMP is applying AI-powered sortation at scale to modernize the world's recycling infrastructure and maximize the value in waste. AMP gives waste and recycling leaders the power to harness AI to reduce labor costs, increase resource recovery, and deliver more reliable operations. With hundreds of deployments across North America, Asia, and Europe, AMP's technology offers a transformational solution to waste sortation and changes the fundamental economics of recycling. Headquartered in Louisville, Colorado, the Denver Post and BuiltIn Colorado have recognized AMP as one of the state's top workplaces. AMP has operations and career opportunities outside of Atlanta, Cleveland, Portsmouth, Virginia, and Europe. We're fostering an environment where passionate individuals can grow and create impact. We seek unconventional thinkers to join our mission to enable a world without waste; at AMP, your contributions have meaning and can spur change. With backing from top-tier investors and national recognition including North American Cleantech Company of the Year, we're always seeking ways to better our operations, raising the bar on innovation, and looking to collaborate and improve in what we do. Learn more at AMPSortation.com. AMP is hiring a Facility Process Engineer reporting to the Process Engineering Manager who can be 100% ONSITE in AMP's newest single stream facility in Commerce City, Colorado. The primary objective of this role will be the timely execution of commission and ramp responsibilities - leading to the standardized and reliable operation of the Denver, Colorado facility. After successfully meeting contractually obligated performance requirements, the role will pivot to a reliability focus, acting as the on-ground AMP technology and process subject matter expert for commercial, engineering, and operations groups. This role will be responsible for empowering onsite resources to consistently meet production KPIs through AMP technology training, facility configuration optimization, regular facility software updates, and proactive + continuous performance monitoring. The ideal candidate will have a diverse background in process engineering and/or field engineering, experience performing facility scale validation testing, a history of working with production operators, and demonstrated examples of data-backed decision making in a process engineering environment. The candidate should also have hands-on experience with mechanical equipment, hydraulics, motors & other rotating equipment. Any experience with industrial robotics, preventative maintenance, or reliability engineering is also considered transferable. As our Facility Process Engineer, you will: Be in a 6 Month Training Program prior to the Denver, Colorado facility installation, work with onsite operation staff in Norfolk, VA to optimize the Portsmouth MSW facility and in the process become familiar with AMP ONE technology. Execute time study analysis of standard work to drive operational efficiencies. Becoming the technical leader on AMP technology and being the escalation point for onsite operations. Driving facility improvement to design engineering and own the improvement from requirement gathering to field execution. With assistance from the Process Engineering team and the Process Engineering Manager, execute commission, startup, and ramp of the Denver, Colorado facility. Execute both Software Acceptance Testing and Functional Acceptance Testing procedures for successful plant startup. From off-site device commissioning to breaking ground, remain onsite and/or at the point of equipment production to ensure all pre-commission tasks are completed with 0 onsite rework required. Drive lessons learned from each startup back to the Process Engineering Manager, for distribution to the design engineering, asset deployment, and operations groups. Facilitate the transition from startup to typical operations through training plant operators and facility staff on preferred process conditions and equipment operation (feeds, speeds, and configurations). Work with Engineering and Facilities Operations groups to execute facility reliability and improvement plans - deriving plant specific configuration standards. Perform before and after configuration change analysis - validating and verifying process specific performance parity or improvement across varying infeed compositions and characteristics. Create and/or execute test plans and analysis - with the goal of consistently meeting facility level recovery rate, throughput, and uptime requirements. Facilitate execution and communication of any/all AMP tech MOC processes (management of change) - ensuring smooth transition of changes across operators and operational leadership. Coordinate and perform full system and equipment specific performance audits, validating AMP AI and executing on customer reporting requirements. Train facility personnel on the operation of AMP developed equipment and act as a Tier 2 resource for plant failure escalations. Act as the operational expert in core AMP sorting technologies and serve as a technical escalation resource within the plant - assisting facility personnel in troubleshooting internal AMP equipment and 3rd party vendor equipment. Create facility operational collateral (documentation and videos) for training new plant managers and operators on standardized AMP theory of operations. Train operators and maintenance staff on function and troubleshooting associated with the AMP's custom facility control system and AMP sortation equipment. Present AMP standardized processes to new AMP facility teams as designated by Facility Ops (such as infeed management, tip floor expectations, and data tracking expectations). With the assistance of the Process Engineering Manager and software teams, develop and action on standardized machine performance reporting, alerting, and alarming. Approach performance reporting from a proactive posture, creating systems and processes to see and mediate onsite issues before they occur. As the highest-level technical resource on the ground in AMP's newest facility, this role is pivotal to the continued success of the AMP One facilities business. This role will develop knowledge and expertise uniquely available to personnel local to the achieved success and lessons learned within a cutting-edge waste processing facility. Depending on the candidate and project success, it is reasonable to assume this role grows to incorporate responsibilities across multiple AMP One facilities. Prior to the installation of the Commerce City, Colorado facility this position should expect to be 100% ONSITE at AMP's first of its kind municipal solid waste facility in Norfolk, VA. Supervisory Responsibilities: None The successful candidate will have: Required: 3+ years' experience in a process, controls, or field engineering role Startup Experience - SAT (Software Acceptance Testing) and FAT (Functional Acceptance Testing) - creating and execution. Experience in a manufacturing environment Demonstrated examples of real-world data analysis, process performance testing, and system validation testing - production of technical reports and test plans for management level decision making and review. Demonstrated ability at performing mechanical and/or electrical field modifications, onsite fabrication, hands on experience with rotating mechanical, hydraulic equipment, and controls/sensors (preferably conveyors, balers, reducers, etc). Maintenance experience is considered transferable Experience with standard process improvement methodologies (ie. lean, six sigma, etc) Preferred: 1+ years' experience as a lead operator and/or significant interaction with process operators. Experience participating in and leading formalized root cause analysis exercises. Hands on experience commissioning and calibrating industrial robotics. Grafana or other data historian/database experience (SQL based) Examples of technical writing Networking exposure - TCP/IP networking (routing & switching, VPNs, managing VPCs, running and interpreting packet captures) Experience with a wide variety of both batch and continuous process controls (chemical, Petrochemical, pharmaceutical, etc.). Interest in/experience with Machine Learning/Artificial Intelligence and/or robotics Ability to read and/or write any adjacent, modern, coding language Facility operation experience Knowledge of waste industry incentives and experience working in waste industry facilities or waste industry adjacent facilities. Education: Bachelor's Degree in any engineering discipline Salary & Compensation Information: $102,000 - $112,000 per year. Equity Grant: The candidate selected for this role will be recommended for a stock option grant commensurate with the position and the candidate's qualifications. Working Conditions/Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, use hands and fingers, handle or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl and talk and hear. The employee must occasionally lift and/or move up to 45 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus, and ability to accurately see and label color. Working Location(s): 4150 East 60th Avenue, Commerce City, CO 80022 Travel Requirements: Initial 6 months will require candidates to partake in a training program to familiarize them with AMP technology and current facility operations. This candidate will be part of an onsite training program, fulltime located in the Norfolk, VA area. Once the Denver facility is operational, travel is expected to be 25% or less, traveling primarily for knowledge sharing and/or resource cover down scenarios at other facilities. Benefits Information: Medical - The company covers up 77% to 100% of the premium for Cigna medical healthcare plans depending on the selection. Employees pay the difference in premium if they select a more expensive plan. Up to 75% for dependents. Dental, Vision, Short- and Long-Term Disability Life Insurance: The company covers the cost of Basic Life / AD&D 1 x Salary, option to purchase additional through New York Life Benefits start the day you start HSA Eligible Health Plans, Employer Monthly Contributions on Dependent and Individual Plans 401(k) retirement plan (non-matching) FTO - Flexible Time Off 6 Accrued Sick Days Eight (8) paid holidays We'll consider applications on an ongoing basis.

360 IT Professionals is a Software Development Company based in Fremont, California that offers complete technology services in Mobile development, Web development, Cloud computing and IT staffing. Merging Information Technology skills in all its services and operations, the company caters to its globally positioned clients by providing dynamic feasible IT solutions. 360 IT Professionals work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Job Description We are looking to fill a position for Sr. process Engineer with at least 10 yrs. of relevant experience in [Project Management Practices. The key areas of focus and deliverables are: Cradle-to-grave process artifacts for Application Lifecycle Management, Knowledge Management, Asset Management, Change Management, Problem Management, and Incident Management Evaluation and gap analysis for Application Lifecycle Management, Knowledge Management, Asset Management, Change Management, Problem Management, and Incident Management effectiveness review and continuous improvement recommendations of the Off-boarding process available to supervisors in the Customer Service Portal To accomplish this, the Senior Process Engineer will: · Assess current in-scope processes and make additional recommendations for improvements related to efficiency · Make heavy use of available materials in the above mentioned areas as fodder for process engineering activities · Develop process maps · Identify associated process goals, and metrics for measurement of each goal, to ensure that process performance can be measured and quantitatively managed · Meet with any applicable stakeholders to capture data and information as necessary and with Chief Customer Officer approval · Draft, or facilitate preparation of, process flows and instructional materials in coordination with Communications team · Ensure process interface with dependent, or related, processes across the enterprise · Apply industry process engineering best practices to legacy and new processes Qualifications Three or more years' experience with Process Engineering techniques and models · Expert knowledge in designing and implementing processes and process assets and/or frameworks · Successful completed the Intermediate Concepts of CMMI course · Active Project Management Professional (PMP) An understanding of IT Service Management framework · 10+ years' experience with Project Management practices · ITIL certification a plus · Knowledge of large-scale process methodologies and frameworks in State government environments is a plus Additional Information Webcam interview is acceptable.

US Tech Solutions is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit our website ************************ We are constantly on the lookout for professionals to fulfill the staffing needs of our clients, sets the correct expectation and thus becomes an accelerator in the mutual growth of the individual and the organization as well. Keeping the same intent in mind, we would like you to consider the job opening with US Tech Solutions that fits your expertise and skillset. Job Description Job Details: The Process Validation Engineer will ensure consistent implementation of corporate and regulatory compliance of validation activities within a pharmaceutical manufacturing facility. Primary functions of the role include : Oversees trial runs of a production or production- related process to substantiate the validity of the equipment/process and completion of all associated documentation. Works with project engineers and other support groups to have an in-depth understanding of new and existing equipment capabilities. Tests critical and key process parameters to assure reliability, quality and proper documentation to support the associated process and results. Develops a working knowledge within assigned area of responsibility of equipment function, design, and utilization. Presents updates, reports and presentations as necessary to the department, plant staff and regulatory agencies. Provides a key role in assuring the integrity of the manufacturing process. Qualifications Requirements : BS/BA degree required in engineering or an engineering related field Minimum of three years of experience, preferably in the pharmaceutical industry. Proven ability to understand equipment design and functions to assure appropriate utilization and validation of the process. Excellent multi-tasking skills and the ability to document details of the work performed are required. Advanced computer skills Additional Information Regards, Sneha Shrivastava ************

Hunter Douglas is the world's leading manufacturer of window coverings and a major manufacturer of architectural products. We are a brand that you know and trust. With more than 100 years of innovation, we've defined our industry with proprietary products that deliver revolutionary style and functionality and can be found in millions of homes and commercial buildings globally. We are searching for candidates that are driven, intelligent, creative, and entrepreneurial. By offering challenging and accelerated opportunities for growth, powered by a shared hunger for success, we create a space for your career to thrive. In return for your expertise, we are committed to providing competitive and robust total compensation and benefit packages to ensure you feel valued. Our dream is to become the fastest growing, most loved, window covering company in the world. What's yours? Position Overview The Fabrication Process Engineer II plays a critical role in ensuring the safety, quality, and efficiency of manufacturing processes at Hunter Douglas. This position is pivotal in driving operational excellence by developing and maintaining standard work procedures, optimizing processes, and ensuring productive capacity aligns with delivery schedules. The Fabrication Process Engineer II leads multidisciplinary teams, implements effective countermeasures, and supports flawless process launches to achieve organizational goals. What you'll do Guide projects and tasks by identifying opportunities through engineering principles to support informed decision-making. Demonstrate independent judgment to adapt methods for non-routine assignments. Coordinate multiple small to medium-sized projects concurrently, assigning tasks and ensuring timely completion. Perform safety process walks, implement countermeasures, and ensure zero accidents due to process issues. Define and document direct labor requirements and cycle times for each process monthly. Lead multidisciplinary teams to achieve process target efficiencies and maintain standard work procedures. Support Level 1 (LV1) process performance, documenting results such as headcount, cycle times, rates, and efficiencies. Develop and maintain Process Failure Mode and Effects Analyses (PFMEAs) to prevent poor quality costs. Conduct weekly process/Gemba walks to ensure compliance with standard work and identify opportunities for improvement. Validate and approve packaging designs and lead packaging trials in collaboration with the Packaging CoE. Lead Engineering Change Notice (ECN) implementation and productive capacity studies for current or new processes. Support best practice projects, LV2 events, and automation initiatives as needed. Communicate potential risks or major issues to the Engineering Site Lead. All other duties as assigned Who you are Mechanical Engineering degree. Minimum 3-5 years of experience in process engineering (5 years preferred). At least 1 year of leadership experience in the manufacturing industry. Project management experience is desirable. Strong analytical and problem-solving skills. Excellent communication skills across all levels. Effective planning and organizational skills. Ability to work independently and manage multiple tasks/projects simultaneously. Results-oriented with high attention to detail. Must be comfortable working from the office for 5 days a week. Willingness to travel (20%+). Frequent standing, walking, and occasional lifting of fabric rolls weighing 50 pounds or more. Ability to climb a stair ladder to a height of 10 feet occasionally. What's in it for you Annual base salary range: $95,000 - $102,000 Bonus target: 20% Generous benefits package including medical, dental, vision, life, disability A company culture that prioritizes internal development and professional growth Time off with pay 401(k) plan with a degree of employer matching Paid parental leave Wellness programs and product discounts Please note, all offers presented to candidates are carefully crafted to ensure market competitiveness, equity, and reflect the individual candidate's education, experience, skills and potential. Hunter Douglas is an Equal Opportunity Employer and complies with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply. The deadline to apply for this position is February 16, 2025 [#LI-RS1] [#LI-office] By submitting your application below, you are providing your prior consent to receive SMS messages to notify you of any updates to your application status and to engage in discussion throughout your application process. You can cancel the SMS service at any time. Just text “STOP” to any of our texts to unsubscribe. Message & data rates may apply. Message frequency may vary. If you have any questions regarding privacy, please read our privacy policy, ******************************************** or terms of use ******************************************

Digital Signal Processing (DSP) EngineerLOCATIONAurora, CO 80014CLEARANCETS/SCI Full Poly (Please note this position requires full U.S. Citizenship) KEY SUMMARYWe are seeking a highly skilled and innovative Digital Signal Processing (DSP) Engineer to join our team and develop cutting-edge solutions in signal analysis and processing. In this role, you will design, implement, and optimize DSP algorithms to support advanced communication and data systems. You will work collaboratively with a team of engineers and technical experts to solve complex problems and ensure system performance and reliability. If you are passionate about signal processing, problem-solving, and advancing technology, we encourage you to apply! *** Please note that our job openings are dynamic and can open or close quickly (much faster than we can publish). If you do not see an opening you are looking for, know that we see almost all types of positons. We strive to keep our listings up to date, but please consider submitting your current resume. Our team will work with you to identify the most recent opportunities that align with your skillset and career goals. We look forward to you joining our family. *** SIMILAR CAREER TITLESSignal Processing Engineer, DSP Software Engineer, Communication Systems Engineer, RF Engineer, Audio Signal Processing Engineer, Embedded Systems Engineer, Systems Engineer, Algorithm Developer, Telecommunications Engineer, Wireless Systems Engineer, etc.DEGREE (Level Desired) Bachelor's DegreeDEGREE (Focus) Electrical Engineering, Computer Engineering, Telecommunications Engineering, Physics, Signal Processing, Systems Engineering, Electronics Engineering, Applied Mathematics, Computer Science, Aerospace Engineering, etc.ALTERNATE EXPERIENCEGeneral comment on degrees: Most contracts allow additional experience (4-5 years) in lieu of a Bachelor's Degree. Some contracts give 4-5 years experience credit for a Bachelor's Degree. Some contracts give 2 years experience credit for a Master's Degree. We will work with you to find the right fit.POSITION RESPONSIBILITIES Design and implement DSP algorithms Analyze and process signal data Optimize DSP performance Develop and simulate signal models Troubleshoot DSP system issues Collaborate with cross-functional teams REQUIRED SKILLS Proficiency in MATLAB or Python Knowledge of Fourier transforms Experience with filter design Signal modulation and demodulation DSP programming for real-time systems Familiarity with signal processing hardware DESIRED SKILLS Knowledge of wireless communication protocols Familiarity with embedded systems Experience with noise reduction techniques Understanding of adaptive filtering Proficiency in C/C++ for DSP applications Knowledge of image or audio processing PLUG IN to CYMERTEK - And design your future... YOUR FOREVER CAREER STARTS HERE Are you looking for more than just a job? Join a company where employees are treated like family, and your career is built to last. We are a growing small business and a trusted federal contractor offering full scope consulting services in information technology, cybersecurity, and analyst workforce development. At our company, you come first. We're committed to creating an environment where you'll thrive professionally and personally. We provide meaningful, challenging work using cutting-edge technologies while investing in your growth and success. With direct access to company leadership, a laid-back and inclusive atmosphere, and exceptional work-life balance, you'll feel valued every day. We also believe in taking care of our family - both yours and ours. Our benefits are phenomenal, family-friendly, and designed with your well-being in mind. From employee and family events to career-long support, we create a community you'll never want to leave. Ready to make your next move the best one? Join us and experience the difference. BENEFITS Excellent Salaries Flexible Work Schedule Cafeteria Style Benefits 10% - 401k Matching (Vested Immediately) Additional 401k Profit Sharing 30 days Paid Leave/Holiday (No Use or Lose!) The day off for your birthday Medical/Dental/Vision - 100% employee coverage. ($1200 allowance - or a bonus) HSA/FSA AFLAC Long Term/Short Term Disability - 100% employee coverage. No cost to you. Life Insurance - 100% employee coverage. No cost to you. Additional Discretionary Life Insurance Paid Training No long, wordy reviews with tons of paperwork!!! Referral bonus program with recurring annual payments HOW TO APPLY Email us at ***************** or apply today: **************** Want to see what our employees think? Click here . EQUAL OPPORTUNITY EMPLOYER STATEMENT Cymertek is proud to be an Equal Opportunity Employer committed to fostering an inclusive and diverse workplace. We embrace and celebrate differences in our employees, recognizing that a diverse workforce enhances our creativity, innovation, and overall success. At Cymertek, employment decisions are made based on merit, qualifications, and business needs without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable laws. We believe in creating an environment where all individuals are treated with respect and dignity, and where opportunities for professional growth and advancement are accessible to everyone, regardless of background or identity.

Corona specializes in solving challenging and emerging drinking water problems across the US. As a small firm, we avoid unnecessary bureaucracy, and individuals benefit from working on a wide variety of projects. Staff are directly mentored by several of the nation's leading experts on drinking water quality. Our projects demand high-performance standards, but we strive to ensure all employees maintain a healthy work-life balance. As a Corona team member, you will work on fulfilling projects, your opinions and experience will be valued, and you will directly influence your career path. Get more details at ********************** Job Description JOB SUMMARY: Corona Environmental Consulting, LLC, bridges the gap between academia and traditional drinking water consulting engineering. We specialize in developing solutions to water quality and treatment challenges that have not been addressed before. As a member of our team, you will work with us to deliver water quality and treatment-related projects addressing: Surface water quality issues, including disinfection byproducts precursors, microbial contaminants, taste and odor compounds, and cyanotoxins Groundwater quality issues, including nitrate, 1,2,3-trichloropropane, PFAS, hexavalent chromium, ammonia, manganese, and arsenic Distribution system water issues, including disinfectant residuals, disinfection byproducts, nitrification, and corrosion control for lead and copper Drinking water policy assessments and needs JOB RESPONSIBILITIES: Study, plan, and optimize water treatment and distribution system facilities Analyze and interpret operational and water quality data Support field testing of water treatment processes at bench-, pilot-, and demonstration-scale Evaluate the treatability of source water supplies based on raw water quality and treated water quality requirements and goals Model drinking water treatment processes Prepare engineering test plans, reports, and client presentations Participate in facility startup, operator training, and process and equipment troubleshooting Prepare facility permitting documents for water treatment and distribution facilities Perform regulatory evaluation and review for treatment requirements related to existing and potential future drinking water regulations Prepare life cycle cost estimates for water treatment facilities Evaluate water treatment and distribution system operations Travel for project needs Qualifications REQUIRED ATTRIBUTES Master's degree in Environmental Engineering or related field required Engineer Intern (EI) registration Excellent verbal and written communication skills Strong organizational skills Self-motivation with a desire to be challenged Ability to work well as a team member or individually Willingness to take initiative and assume responsibility Willingness to travel for project needs and to support client interactions PREFERRED ATTRIBUTES Data analysis experience with R, Python, and/or SQL Mapping experience with GIS Experience with hydraulics and hydraulic modeling Drafting experience with CAD Additional Information JOB DETAILS: Compensation: Salary range: $70,000-$90,000, benefits, 401k + match, and bonus potential. Six paid holidays, parental leave, and 19 days PTO. Employment Type: Full-time, salaried Job Type Environmental Engineer Education: Master of Science degree (minimum) Experience: 0-5 years Locations: Louisville, CO Relocation May be considered for qualified applicants All your information will be kept confidential according to EEO guidelines

Splunk, a Cisco company, is building a safer and more resilient digital world with an end-to-end full stack platform made for a hybrid, multi-cloud world. Leading enterprises use our unified security and observability platform to keep their digital systems secure and reliable. Come help organizations be their best, while you reach new heights with a team that has your back. Meet the Team Splunk, a Cisco company, is building a safer, more resilient digital world with an end-to-end, full stack platform designed for hybrid, multi-cloud environments. Join the FedRAMP team where you will be a part of one of the largest and most sophisticated cloud-scale, Bigdata, and microservices platforms in the world. You will be working with engineers who operate highly available, scalable, and cost-efficient applications with low operational burden by handling and improving the reliability and resiliency of services and infrastructure. You thrive driving initiatives on automation, infrastructure-as-code, reliability engineering, and getting rid of tedious, manual tasks. Your Impact Splunk's FedRAMP SRE team is looking for a Site Reliability Engineer to help lead, design and build the next generation of our large scale cloud offering. You will be working on core services and applications that form the primitives for our current and future cloud service offerings. Site Reliability Engineers in this role will be engaging with multiple service owners across the platform to teach and implement modern interpretations of SRE, observability, Chaos Engineering and DevOps. This role is highly visible and impactful to the organization and will help shape Splunk's Engineering culture for years to come. Your job, in a nutshell, is to make every team around you better... including your own! You will: * Own Splunk Cloud in FedRAMP environments. * Work across the organization to deliver quality products that delight Splunk's passionate users. * Work with teams of tight-knit engineers who are building a state-of-the-art, cloud-based environment for massive-scale data processing. Minimum Qualifications * You have experience or an interest in working with regulated computing environments such as FISMA and/or FedRAMP and are enthusiastic about doing it better. * You have worked with Kubernetes, EKS, GKE or AKS and the associated ecosystems. Kubernetes certifications or an interest in obtaining these certifications are a plus, such as those from the Cloud Native Computing Foundation; Certified Kubernetes Administrator (CKA), Certified Kubernetes Application Developer (CKAD), or Certified Kubernetes Security Specialist (CKS). * You have a good understanding of linux systems (network stack, file system, OS services) and networking (L2 vs. L3, network architecture, VLANs, etc) * Experience with at least one programming language, preferably golang (go) or python. Knowledge of working with and automating linux systems tasks using this language is required, including working with configuration files and system services. Knowledge of common data structures and algorithms, as well as their performance characteristics is required. * Skilled in identifying performance bottlenecks, identifying anomalous system behavior, and resolving root cause of service issues. Preferred Qualifications * Experience monitoring cloud environments with Splunk. * Experience with development and deployment in a hosted cloud environment, preferably AWS, Azure or GCP. Cloud certifications are a plus or an interest in obtaining these certifications, such as AWS Certified Solutions Architect, AWS Certified DevOps Engineer, or Google Associate Cloud Engineer (ACE). * Experience with large scale distributed cloud service development, infrastructure, traffic management and architecture. * Experience with distributed architectures/systems with optimized and scalable software that operates on a large number of nodes. Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: The starting salary range posted for this position is $126,500.00 to $182,000.00 and reflects the projected salary range for new hires in this position in U.S. and/or Canada locations, not including incentive compensation*, equity, or benefits. Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: * 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees * 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco * Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees * Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) * 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next * Additional paid time away may be requested to deal with critical or emergency issues for family members * Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: * .75% of incentive target for each 1% of revenue attainment up to 50% of quota; * 1.5% of incentive target for each 1% of attainment between 50% and 75%; * 1% of incentive target for each 1% of attainment between 75% and 100%; and * Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $152,500.00 - $252,000.00 Non-Metro New York state & Washington state: $135,800.00 - $224,400.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Reports to the Process Engineering Manager: This position's primary focus is to provide process engineering support and optimization assistance for MPLX's facilities including supporting operations in troubleshooting, process modeling, and PHAs. This person will collaborate with business development, engineering, operations, and the capital projects groups to develop, evaluate, and advance projects. All work will be performed in compliance with company standards, procedures, and government requirements. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. The actual position title and pay grade will be based on the selected candidate's experience and qualifications. KEY RESPONSIBILITIES: * Work closely with Operations and Business Development to troubleshoot process related bottlenecks. * Provide process support for facility startups and shutdowns. (Planned and Unplanned) * Generate monthly KPI (Key Process Indicators) reports for facilities. * Provide process support for PHAs and LOPAs of facilities. * Assist Operations in the development and review of CPVs, SOLs, and Operating Procedures. * Provide process engineering support for root cause failure analysis of equipment, instrumentation, and process controls. * Participates in the development and review of new G&P standards including engineering, operations, PSM, environmental, and health and safety. * Must be able to handle assignments and projects with minimal supervision and complete within acceptable time standards. * Travel expected up to 33% based on location. Other MPLX locations may be considered. EDUCATION AND EXPERIENCE: REQUIRED: * Bachelor's Degree in Engineering from an accredited College or University * Minimum of 3 years of Process Engineering experience * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Valid Driver's License * Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. PREFERRED: * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Chemical Engineering degree * PE License * Broad process knowledge of compressor stations, natural gas cryogenic processing facilities, and light end fractionation processes. * 7+ years in the oil & gas, chemical, pharmaceutical, or manufacturing industry SKILLS: Must have excellent verbal and written communication skills to effectively communicate with all levels of individuals/employees. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Midland, Texas Job Requisition ID: 00020052 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 600 N Marienfeld St Ste 450 Box 140 Additional locations: Bridgeport, West Virginia, Cadiz, Ohio, Canonsburg, Pennsylvania, Carlsbad, New Mexico, Denver, Colorado Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

360 IT Professionals is a Software Development Company based in Fremont, California that offers complete technology services in Mobile development, Web development, Cloud computing and IT staffing. Merging Information Technology skills in all its services and operations, the company caters to its globally positioned clients by providing dynamic feasible IT solutions. 360 IT Professionals work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Job Description We are looking to fill a position for Sr. process Engineer with at least 10 yrs. of relevant experience in Project Management Practices. The key areas of focus and deliverables are: Cradle-to-grave process artifacts for Application Lifecycle Management, Knowledge Management, Asset Management, Change Management, Problem Management, and Incident Management Evaluation and gap analysis for Application Lifecycle Management, Knowledge Management, Asset Management, Change Management, Problem Management, and Incident Management effectiveness review and continuous improvement recommendations of the Off-boarding process available to supervisors in the Customer Service Portal · Assess current in-scope processes and make additional recommendations for improvements related to efficiency · Make heavy use of available materials in the above mentioned areas as fodder for process engineering activities · Develop process maps · Identify associated process goals, and metrics for measurement of each goal, to ensure that process performance can be measured and quantitatively managed · Meet with any applicable stakeholders to capture data and information as necessary and with Chief Customer Officer approval · Draft, or facilitate preparation of, process flows and instructional materials in coordination with Communications team · Ensure process interface with dependent, or related, processes across the enterprise · Apply industry process engineering best practices to legacy and new processes Qualifications Three or more years' experience with Process Engineering techniques and models · Expert knowledge in designing and implementing processes and process assets and/or frameworks · Successful completed the Intermediate Concepts of CMMI course · Active Project Management Professional (PMP) An understanding of IT Service Management framework · 10+ years' experience with Project Management practices · ITIL certification a plus · Knowledge of large-scale process methodologies and frameworks in State government environments is a plus Additional Information Webcam interview is acceptable.

US Tech Solutions is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit our website ************************ We are constantly on the lookout for professionals to fulfill the staffing needs of our clients, sets the correct expectation and thus becomes an accelerator in the mutual growth of the individual and the organization as well. Keeping the same intent in mind, we would like you to consider the job opening with US Tech Solutions that fits your expertise and skillset. Job Description Job Details: The Process Validation Engineer will ensure consistent implementation of corporate and regulatory compliance of validation activities within a pharmaceutical manufacturing facility. Primary functions of the role include: Oversees trial runs of a production or production- related process to substantiate the validity of the equipment/process and completion of all associated documentation. Works with project engineers and other support groups to have an in-depth understanding of new and existing equipment capabilities. Tests critical and key process parameters to assure reliability, quality and proper documentation to support the associated process and results. Develops a working knowledge within assigned area of responsibility of equipment function, design, and utilization. Presents updates, reports and presentations as necessary to the department, plant staff and regulatory agencies. Provides a key role in assuring the integrity of the manufacturing process. Qualifications Requirements: BS/BA degree required in engineering or an engineering related field Minimum of three years of experience, preferably in the pharmaceutical industry. Proven ability to understand equipment design and functions to assure appropriate utilization and validation of the process. Excellent multi-tasking skills and the ability to document details of the work performed are required. Advanced computer skills Additional Information Regards, Sneha Shrivastava ************