Reliability engineer jobs in Lakewood, OH

Company: Davey Resource Group, Inc. Additional Locations: OH/PA/NJ Statewide Work Site: On Site The Pole Inspection and Treatment Foreman is responsible for ensuring that projects meet metrics related to safety, quality, production, and compliance. This position involves leading a team of crew members and serving as a subject matter expert in the field. Key responsibilities include allocating and managing resources to meet project deadlines, performing daily physical tasks, and frequent travel. This position supports the inspection, restoration, and enhancement of utility infrastructure. This is a working foreman position, leading in a field environment. Job Duties Serve as a working foreman, actively participating in daily field tasks alongside crew members. Lead by example in completing utility pole inspections, restoration work, and field operations. Ensure team performance meets safety, quality, production, and compliance standards. Supervise and support daily utility pole inspection and restoration tasks. Oversee team scheduling and attendance. Communicate daily progress major issues to the Project Manager. Provide on-the-job training, mentorship, and performance feedback to team members. Lead safety and collaborate with the Safety Team on investigations and documentation. Conduct daily safety and quality control inspections to ensure compliance with regulations and client standards. Assist in hiring and ongoing training of new employees. Operate company vehicles and ensure proper care and maintenance of vehicles and equipment. Utilize technology (e.g., GPS, iPads, GIS software) for field documentation and data collection. Perform field tasks including utility pole inspections, excavation, backfilling, preservative application, and steel truss installation. Use handheld and pneumatic tools as needed for restoration work. Interact professionally with landowners and represent the company in public settings. Maintain job site cleanliness and ensure safe, efficient work practices. Remain current with new technology and apply it to field operations. Travel extensively (75-100%) based on project requirements. React appropriately in emergencies and adhere to all company policies and procedures. Perform other related duties as assigned. Qualifications Ability to prioritize tasks and work with limited direct supervision. Lead, motivate, influence, and direct team members; demonstrates a growth mindset focused on continuous improvement and learning. Analyze problems effectively, identify alternative solutions, anticipate outcomes, and implement resources appropriately. Demonstrated knowledge of utility infrastructure, including electric hazard identification, electric equipment, and communication equipment. Proficiency in pole inspection and restoration, with the ability to train and mentor others. Experience following best practices for working with utility poles and related infrastructure. Ability to identify issues and implement effective solutions in inspection and restoration processes. Proven ability to work independently and effectively in a field setting. Valid driver's license and a clean Motor Vehicle Report; must pass the Davey Driver's Safety Course. Ability to obtain a pesticide license where state regulations require it. Comfortable using technology in the field, including iPads, cameras, GIS software, and navigation tools. Effective communicator in both one-on-one and group settings. Ability to follow detailed instructions accurately and operate safely. Proficient in English. Experience using Google Workspace tools. Additional Information What We Offer As an employee-owned company, we believe in investing in the people who help drive our success. That means treating our team members like owners-because they are. After six months of full-time employment, eligible employees can become shareholders through our Employee Stock Ownership Program. Ownership fosters collaboration, pride, and a shared responsibility in the work we do and the culture we build. We're committed to providing a safe, rewarding, and growth-focused work environment backed by industry-leading training, advanced technology, and a comprehensive benefits package. Benefits Highlights Health & Wellness Group health plans Short- and long-term disability insurance Life insurance Paid parental leave Financial Security 401(k) with up to 4% company match Employee Stock Purchase Plan - buy stock at a 15% discount Payroll savings plan Charitable matching gift program Employee referral bonus program Time Off Paid holidays and paid time off (PTO) Education & Development Employee Educational Scholarship Davey Family Scholarship Industry-leading training and development opportunities Perks & Discounts 20% discount on all Davey services Cell phone discounts Vehicle purchase discount program Divisional Overview The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. Utility Asset Management is a division of Davey Resource Group, Inc. (DRG), a Davey company. Davey has been employee-owned since 1979. Our engineering, field services, inspection, and construction teams help keep the world connected, supporting the infrastructure of our electric utility and communications partners. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental and utility infrastructure consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our people, offering industry-leading training, technology, and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there's a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at ************** or at ********************. Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 100%

FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with FirstEnergy Service Co., a subsidiary of FirstEnergy Corp. [FEU] This is an on-site position located in either Akron, Ohio, Morristown, NJ, Fairmont, WV, or Reading or Greensburg, Pennsylvania. The job of Substation Design Standards Engineer requires an individual to be self-directed with an interest and / or ability to create and manage engineering designs, equipment and standards for the Substation Engineering group within FirstEnergy. This position will work within a staff of engineers, survey crews, drafters / layouts, both internal and external, engaged in a wide variety of engineering design, from the request for project estimation through construction and record update. This position will report on the progress of design projects and advise of any issues that could impair the successful completion of the project on a proactive basis. This position must provide technical support to Substation and Transmission personnel, Real Estate, Project Management and Construction crews verifying that no safety standards are compromised, checking for accuracy, and monitoring expenditures to ensure projects stay within budget allocation and meet the required in-service date. Responsibilities include: Creating engineering designs and work scope for substation projects and confirming documentation and support is available to necessary personnel. Possible items including steel structures, foundations, clearances, layout drawings, grounding, oil containment, lightning protection, schematics, and wiring diagrams. Ensuring designs support a safe environment for transmission lines and substations personnel, contractors and the general public. Preparing bills-of-material and specifications to procure needed equipment and materials for a substation project. Preparing and filing applications and supporting documentation for engineering permits when necessary. Reviewing NESC clearance requirements and Maintenance personnel and ensure the public safety is protected. Assisting Real Estate in the acquisition of Substation property by coordinating the preparation of sketches, maps, exhibits and easement plans. Directing technical personnel to gather and record data for substation design projects. Working with outside engineering firms, vendors, equipment manufacturers and consultants. Providing engineering support to employees to assist in their learning of standards, procedures, designs, and associated issues. Analyzing engineering issues, structures, equipment, etc., and recommending appropriate solutions and alternate design options. Preparing estimates for proposed projects. Reviewing manufacturer drawings for compliance with specifications. Conducting design reviews, plant audits, and test witnessing at manufacturer's facilities as necessary. Evaluating equipment ratings and requirements, and project schedules to facilitate the accurate ordering of equipment to support project in service dates. Managing equipment orders for Substation projects from the initial request for equipment through delivery (technical details, bid evaluation, schedule, drawing review, design review, action items testing, and delivery). Supporting communication across business units regarding project needs. Convening internal project schedule compliance review meetings with necessary parties to assure deliverables support project schedule and are within the project budget. Researching and exploring new technologies that will effectively enable work processes to be automated increasing efficiencies while decreasing the risk of human error. Ensuring standards and equipment specifications are up to date and accurate, reviewing against industry standards and best practices. Participating in industry meetings to confirm FirstEnergy has a voice in direction of industry (i.e. IEEE, EPRI, etc.). Ability to obtain Engineer in Training and Professional Engineering license is preferred. Future advancement likely linked to ability to stamp and seal engineering design drawings as a Professional Engineer, when necessary. Supporting and sustaining FirstEnergy as a high performing organization by contributing to excellent organizational performance and values of FirstEnergy through responsible effective work performance. Qualifications at the Engineer III include: Bachelors of Science degree in Electrical Engineering (BSEE) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor's degree in Electrical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical Engineering from a university with an ABET accredited Bachelor's program. Professional Engineering (PE) License preferred. Minimum of 2 (two) years of Engineering experience is required. A Fundamentals of Engineering (FE) Certificate Preferred. Working knowledge of applicable computer software necessary to fulfill job duties including but not limited to Microsoft Office and AutoCAD. Knowledge of FileNet, SAP, and Cascade a plus but not a requirement. Valid driver's license and have access to reliable transportation. Must embrace a safety culture and maintain a safe work environment for co-workers and the public. Must be able to manage “multiple projects simultaneously” and be able to work effectively under the pressure of deadlines, unexpected developments, changes in project scope, budget constraints, unforeseen field problems and demands on time for work assignments outside of the normal duties. Must have strong interpersonal skills and develop and maintain relationships across FE, with outside firms and manufacturers that further facilitate the cooperation needed to complete assigned tasks and that will inspire others to achieve, or exceed, goals. Must be able to work independently as well as in teams to coordinate designs with other FirstEnergy areas of responsibility including Siting and Permitting, Project Management, Maintenance, Forestry, Real Estate and Construction, as well as the Regional operating companies Ability to make practical decisions without undue delay and based on the best information available at the time that the decision must be made. Must be able to communicate effectively with good verbal skills and writing skills, providing comprehensive project status reports, clear and concise correspondence, and accurate information. Must possess strong organizational, computer, and problem solving skills. Must be self-directed and not dependent on detailed instruction from others. Ability to support numerous locations, must be willing to travel throughout the service area and to manufacturer locations, and to work extra and irregular hours. Qualifications at the Engineer IV level include all the above plus: Bachelor of Science degree in Electrical, Civil or Mechanical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited bachelor's program. A Professional Engineering (PE) license is preferred Minimum of 5 (five) years of Engineering experience is required. Project management skills and a proven ability to effectively lead multi-discipline team initiatives. Proficient in team leadership, facilitation, conflict management, decision making, teamwork, and influence management. Excellent interpersonal and cooperation skills that will enable the canidate to independently lead teams, work collaboratively and build and maintain effective working relationships with all levels of the FirstEnergy organization including management and executive leadership. Experience leading technical initiatives with subject matter experts, research firms, and consultants. Experience and proven written and oral communications skills, including the ability to present information, facilitate meetings and provide direction to others. A strong aptitude for mentoring. Engineer II (0 - 3 years of post-college engineering experience) Standard Range - $69,700-$98,400 NJ Range - $83,640-$118,080 Engineer III (4-10 years of post-college engineering experience) Standard Range - $82,025-$115,800 NJ Range - $98,430-$138,960 Engineer IV (10+ years of post-college engineering experience) Standard Range - $100,725-$142,200 NJ Range - $120,870-$170,640 Benefits, Compensation & Workforce Diversity At FirstEnergy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement. Please visit our website at *********************** to learn more about all of our employee rewards programs. FirstEnergy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for FirstEnergy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Exempt FirstEnergy Human Resources Team

Salary: $85,000 - $110,000 + Annual Bonus (10% Target, 20% Max) + Benefits Benefits: Medical, Dental, Vision, Disability, Life Insurance, 401K w/ Match, 11 Paid Holidays, PTO Job Type: Full-Time Core Hours: M-F, 7am-4pm / 8am-5pm Start Date: ASAP Sponsorship: Not available Relocation Assistance: Not Available Process Engineer (Lean Six Sigma Exp. Req.) Description Our client, a leader in the manufacturing industry, is seeking a Process Engineer with strong Lean Six Sigma experience to join their operations team in Cleveland, OH. This role is key to driving plant-wide continuous improvement initiatives focused on optimizing processes, reducing waste, and enhancing operational efficiency. The ideal candidate will bring a hands-on, data-driven approach to process improvement and a proven ability to lead cross-functional teams toward measurable, sustainable outcomes. This is a great opportunity to make a tangible impact within a global organization that offers long-term career growth. Process Engineer (Lean Six Sigma Exp. Req.) Responsibilities • Lead continuous improvement initiatives to streamline operations and eliminate waste • Deliver sustainable improvements in workflow, safety, quality, productivity, and cost • Manage lean transformation using structured problem-solving techniques • Foster a culture of continuous improvement through coaching and employee engagement • Review and optimize company Standard Operating Procedures (SOPs) • Collaborate with Engineering, Quality, Maintenance, and Operations teams • Develop and deliver training materials to enhance internal lean capabilities • Facilitate training sessions for supervisors, production staff, and maintenance teams • Track and report Key Performance Indicators (KPIs) related to lean initiatives • Lead shop floor lean activities and ensure compliance with safety and quality standards • Promote sustainable change through data-driven influence and cross-functional collaboration Process Engineer (Lean Six Sigma Exp. Req.) Qualifications • Bachelor's degree in Chemical Engineering required • Hands-on experience in Lean Six Sigma and process engineering in a manufacturing setting required • Proficiency in Microsoft Office (Excel and PowerPoint in particular) required • Must be available to work 100% on-site at the Cleveland facility

Senior Web Developer Richfield, Ohio Contract - One Year 100% Onsite work Provides comprehensive design, installation, project management, maintenance, testing, and support at the highest level for all hosted applications and elements of the global I/T infrastructure. Assists in planning organizing and controlling the activities of the team. Consults with I/T, internal and external customers on the resolution of complex hosting related technical problems. Guides new hardware, software, and hosting site installations, upgrades, and trouble-shooting. Reviews and acts on daily quality assurance and diagnostic support for the hosted infrastructure at internal and commercial hosting sites. Receives minimal supervision and serves as a work leader for other members of the team. Acts as project manager for hosting projects, installation and support initiatives. Serves as Manager, Datacenter Operations as requested. Duties and Responsibilities · Maintain global web site solutions utilizing IIS, Apache, Tomcat, JRUN, ColdFusion, .Net, HTML, ASP, PERL, Microsoft tools and a variety of web server and DBMS tools. · Work with client management, global technology developers, and external customers to guide and implement complex hosted applications on current and/or new infrastructure. · Assist in scheduling the design, upgrade, and maintain systems that employ scalable technologies supporting internal and commercial hosting initiatives; contribute hands-on support as required. · Build and support hardware and software on Windows or Linux/Unix servers to support deployment of commercial and internally developed global hosted applications. · Lead trouble-shooting and corrective active support to technology developers, publishers, external customers, and internal developers for global hosted related applications. · Guide and/or develop scripts to automate, monitor, and manage the global environment. · Interface with commercial outsource providers as required to build, change, tune, and otherwise support infrastructure supporting commercial applications. · Direct gathering of global statistics and perform analysis of performance data on WWW infrastructure and recommend corrective actions. · Adhere to security measures to insure that the information assets of the Company and the commercial clients are protected at all times. · Perform other duties as assigned. Job Qualifications § Bachelor's degree in Computer Science or Computer Engineering or equivalent work experience, post graduate experience preferred. Related work experience and industry recognized certifications will be considered. § Eight (8) or more years experience with overall computing architectures, WWW architectures, LAN/WAN networking, application design concepts, languages and tools across a wide spectrum of computing platforms and technologies. § Detailed knowledge of Microsoft or Linus/Unix operating systems. § Extensive experience working with commercial developers, internal developers, and customers on the deployment and support of hosted products and infrastructure. § Extensive experience with tools that provide services such as application testing, web application servers, and content management. § Demonstrated experience with web server software and database connectivity to Oracle or SQL Server databases. § Excellent interpersonal and communications skills and ability to work with clients, technical staff, and vendors. § Excellent problem solving and consultative skills. § Excellent planning, project management and implementation skills. § Must be a team player with a positive attitude, enthusiasm, initiative, sense of urgency, and be self-motivated. § Ability to work across global locations as required. § Ability to travel to remote company locations or for other business related needs as required. § Ability to carry a mobile device and provide off hours support as required; ability to work rotating shifts outside of the 8-5, M-F eastern time periods as required. § Ability to lift minimum of 60 pounds of equipment as required. CORE KNOWLEDGE AND COMPETENTCIES: Person needs to understand development as it pertains to deploying and managing large scale applications. Looking for a person with 8+ years' development experience and extensive understanding of infrastructure management. · Detailed expertise with Linux and windows · Detailed expertise with Tomcat and Apache · Understanding of building and developing java-based applications · Troubleshooting skills with web-based applications · Load balance experience · Redis experience · Understanding and expertise with monitoring web-based applications · Containerization experience · Kubernetes experience · Expertise in managing and using Git, · Expertise Jenkins and Artifactory · Expertise with Ansible, RunDeck, and Ansible Automate as it pertains to automating deployments and building out infrastructure. · Understanding of ticketing systems (Jira, Service Now)

Job SummaryThe Manufacturing Process Engineer position assumes the programming/operation/training of all equipment and develops/implements optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. Recommends and implements improvements to production processes, methods and controls, coordinates manufacturing launch for new or revised products. One of the primary responsibilities for the Process Engineer II is to handle programming and training for all equipment for the facility with an emphasis on those that have Programmable Logic Controller (PLC) controls.Manufacturing Process Engineer - Second Shift Location: Independence, OH (Cleveland Area) Division: Copper & Brass Sales - New Launch Opportunity! Salary Range: $80,000 - $110,000 Employment Type: Full-Time, Onsite Eligibility: Must be legally authorized to work in the U.S. without sponsorship. Job Description Summary This is a HOT role in our brand-new Copper & Brass Sales Division! As a Manufacturing Process Engineer, you'll serve as a Subject Matter Expert (SME) on advanced equipment and automation systems, including PLC-controlled routers, waterjets, CNC machines, saws, and robots. You'll lead process improvements, optimize manufacturing methods, and drive efficiency in a high-impact environment. Key Accountabilities Act as SME for equipment requiring PLC (routers, waterjets, CNC machines, saws, robots). Evaluate and develop manufacturing processes through research, design, and collaboration with vendors and operators. Provide decision-making insights by calculating production, labor, and material costs; reviewing schedules; and forecasting requirements. Prepare product and process reports by analyzing trends and data. Ensure compliance with government regulations and maintain product reputation. Keep equipment operational through proactive maintenance coordination and adherence to manufacturer guidelines. Oversee product and process databases, including programming and data entry. Lead development of an apprenticeship program and formal internship initiatives for new employees. Drive process improvement initiatives, problem resolution, and employee training. Improve manufacturing methods for cost reduction, quality improvement, and efficiency. Maintain detailed layouts of buildings and equipment. Assist in improving systems related to production control, SOPs, safety, and quality standards. May rotate shifts initially for training purposes. Qualifications Minimum Requirements: Bachelor's degree in Manufacturing Technology preferred; Associate degree in Engineering discipline acceptable. 3-5 years of experience in a technical or manufacturing field (equivalent experience considered in lieu of degree). Knowledge of manufacturing processes, fabrication methods, and tool design. Familiarity with manufacturing equipment and quality assurance techniques. Ability to work independently and self-motivate. Commitment to health, safety, and environmental standards. Strong problem-solving and teamwork skills. Preferred Requirements: Proficiency in relevant software (CAD, MS Office). Solid project management skills. Strong communication skills and ability to manage fluctuating workloads independently. Why Join Us? Be part of a high-visibility launch in a new division. Opportunity to shape processes and standards from the ground up. Competitive salary: $80,000-$110,000 plus comprehensive benefits. Career growth in a dynamic, innovative environment. Equal Opportunity Employer At thyssenkrupp Materials NA, we value diversity and inclusion. We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status. Ready to engineer the future? Apply today and help us build the Copper & Brass Division at tk MNA in Independence, OH! Job Compensation $80,000 to $110,000 + Other Incentives! Benefits Overview We offer competitive company benefits to eligible positions, such as: Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) or RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world! The Product Quality Engineer for the Airfoil Castings manufacturing process will drive product qualifications and quality improvements for key performance indicators (KPIs) of suppliers within the Airfoil Castings supply chain including quality plan implementation. The PQE, will own supplier First Article Inspection results and drive supplier compliance to Source Substantiation Plans or design intent verification. Provide supplier product release direction when part approval cycles are not complete while also being the internal quality focal for those parts. Collaborate with Supplier Quality, Supplier Quality Operations and New Product Introduction / Management of Change teams as required- this collaboration may include onsite visitation. In this role, you will also understand how the team integrates with other teams outside of Quality to meet short term and long term the business objectives. Demonstrate an in-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. **Job Description** **Roles and Responsibilities** + Role is responsible for supplier processes, from initial qualification, maintenance, and necessary improvement driven by business quality needs. + Product Quality Engineer will have a technical understanding of engineering drawings and will have the ability to manage suppliers and/or quality projects related projects. + Develop in-depth knowledge of a discipline. Use prior experience and acquired expertise to execute functional policy/strategy. + Communication with direct colleagues and the business on the status of First Article Inspection and Source Substantiation Plans. + Provide onsite support at suppliers, as needed ( **approximately 15% travel** ) + Collaboration with other Engineering, Quality, and Sourcing functions to ensure joint success + Impacts projects, processes, and procedures in own field. The role operates with some autonomy but is focused on execution of activities/provision of advice within an enabling discipline covered by standard functional practices and procedures. Activities require professional judgment but may require more senior levels of guidance. + Utilizes technical expertise and judgement to solve problems. Leverages technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. + Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology, or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and can construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision. + May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on specific topics. May guide others to consider a different point of view. **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma/GED with 4 years' experience in Engineering, Materials Science or Quality related roles) + Minimum of 3 years of experience in Engineering, Materials Science or Quality related roles **Desired Characteristics** + Demonstrated experience in manufacturing or supplier quality. + Strong communication skills. + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, market, and execute programs. + Established project management skills. + Demonstrated history of problem solving, root cause and corrective action methodology, data analysis, statistical analysis and quality experience. + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Demonstrated Airfoil Casting manufacturing knowledge and experience is advantageous to the role. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. The base pay range for this position is 100,000.00 - 115,000.00. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on **November 30th, 2025.** _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Collabera is the largest minority-owned Information Technology (IT) staffing firm in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 10,000 professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia) and the United Kingdom. We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but we are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for four consecutive years since 2012. With over forty offices globally and a presence in seven countries, Collabera provides staff augmentation, managed services and direct placement services to Global 2000 Corporations. Collabera is ranked amongst the top 10 IT staffing firms in the U.S., and for the past 24 years we have continued to grow rapidly year after year. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognitions --Staffing Industry Analysts: Best Staffing Firm to Work For (2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description Position Details: Location: Aurora, OH 44202 Job Title: Manufacturing Process Engineer Duration: 4+ months (could go beyond) Description: · The Manufacturing Process Engineer position provides technical manufacturing support for the production of MRI RF Surface Coils. The position is a role with a strong focus on process simplification, cycle time and defect reduction across multiple product lines, and furthermore must be able to work autonomously. Key responsibilities include: · Validation of Manufacturing Execution System routes and data collection plans · Ensuring Regulatory compliance through Validation & Verification · Improving product quality · Maintaining and generating comprehensive procedures Quality Specific Goals: · Aware of and comply with the Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position · Complete all planned Quality & Compliance training within the defined deadlines · Identify and report any quality or compliance concerns and take immediate corrective action as required · Knowledge and understanding of production process Work Instructions and operates within them to ensure that a device conforms to its specifications · Ensures the creation of accurate, complete and timely records and DHRs Qualifications Qualifications: · BS or AS in Engineering or Technical Degree · Proficiency in MS (Word, Excel, etc.) Preferred Qualifications: · Electrical or electronics manufacturing experience · Labview, Agilent Vee or database programming knowledge · Strong oral and written communication skills · Strong technical acumen · Highly motivated, energetic, and creative · Computer science or engineering degree / background Additional Information To know more about this position and to apply, please contact: Ujjwal Mane **************************** ************

Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow. Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels. The resident expert regarding process technology. Responsible for investigating and implementing new process technology at the plant. The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant. This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication. GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management. Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture. The Engineer is expected to spend a significant amount of time on the floor. ESSENTIAL DUTIES & RESPONSIBILITIES: * Safety * Assume a leadership position at the facility in partnership with the shift supervisors. Activities include resolution and communication regarding safety issues. * Execute on scheduled PHA's and JSA's. * Proactively monitor area and remediate potential safety issues. * Use DAKOTA software as a tool for compliance and environmental, health and safety. Use the tool to report incidents, near misses, and non-conformances. * LEAN Culture * Develop and execute upon "standard work" activities. * Assume responsibility for assigned activities on the Engineering Tier and other accountability boards. * Conduct "GEMBA Walks" daily. Use walks as the primary means of education and communication of expectations. * Improve productivity through elimination of non-value-added activities. Apply Engineering principles and methodologies to Improve productivity and eliminate waste. * Product Quality * Work to maximize equipment efficiency and quality for output. * Member of the facility QIC. Ensure identification of root cause and subsequent prevention of future customer complaints. * Assist in the training of operators with a focus on quality critical product specifications and process parameters. * Capable of equipment troubleshooting and process design. EDUCATION: Bachelor's degree from four or 5-year college or university. B.S. in Mechanical, Chemical, Electrical or Controls Engineering. EXPERIENCE: Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: * Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES: * Understanding process variance and the resultant effects on Quality. * Knowledge of applied statistics. * Ability to perform problem analysis utilizing problem-solving methodology. BENEFITS: * Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job DescriptionThe Process Engineer will provide leadership and engineering excellence while driving continuous improvement in areas of reliability, safety, product quality, product delivery, and product cost through the analysis of plant data and collaboration with Operations and Maintenance personnel and collaboration with internal and external resources. The position will work closely with continuous improvement and transformational activities supporting visual workplace, problem solving skills development, defect/waste reduction and enhanced workforce engagement. Engage workforce to eliminate at-risk conditions and behaviors in the site to continuously improve the team's environmental, health, and safety performance. DUTIES / RESPONSIBILITESØ Establish and maintain production procedures, maintenance procedures, process/product control, and test data.Ø Assist in the development of new products and processes.Ø Reduce product lead time via the implementation of Lean Manufacturing concepts on the production line.Ø Audit plant activities to ensure compliance while maintaining appropriate documentation.Ø Interact with vendors for project implementation and proposals.Ø Lead and assist in the development and sustainability of 5S.Ø Facilitate problem solving (root cause analysis) with corrective action through collaboration with Operations, Maintenance, and other support organizations.Ø Collect and analyze process and production data to identify trends and ensure process stability.Ø Ensure quality through analysis of incoming raw materials, process reliability, in-process testing, and final product certification.Ø Partner with the organization to drive business success through process and equipment reliability and teamwork.Ø Drive variable cost productivity through process improvements. Ø Development of trial plans and monitoring/execution of trial.Ø Reduce customer complaints through solid root cause and corrective action analysis. QUALIFICATIONS / REQUIREMENTSv Bachelor's degree in Mechanical, Chemical, Industrial or Electrical Engineering.v 5+ years' experience as Process Engineer in a manufacturing environment.v Mechanical reliability, quality and safety experience.v Demonstrated Mechanical Aptitude.v Decisive and hands-on.v Energetic self-starter with strong leadership skills.v Strong analytical and technical expertise. E04JI800n8pv4071v0p

PDF Download Röchling Industrial Cleveland has been a pioneer in the manufacturing of commercial fiberglass products since 1946. In the electrical insulation industry, the journey began with the production of semi-finished sheet, rod, and custom profiles. Since then, we have diversified into servicing other industrial sectors such as ballistics, corrosion, thermal insulation, and other custom needs. We have an exciting opportunity for a Process Engineer at our South Euclid, OH facility. We are looking for a self-starter eager to assist us with the design and implementation of equipment as well as the continuous improvement of existing processes. Process Engineer Where we need you * Collaborate in the design, development, and implementation of new composite formulations, processes, and procedures. * Evaluate manufacturing processes by applying knowledge of product design, assembly, tooling, materials, and soliciting observations from production operators. * Design and implement processes and recommend improvements. * Test new raw materials to ensure they meet quality standards and specifications. * Perform cost savings and new technology development activities. * Assist in the research and proposals of new equipment or equipment modifications. * Ensure all new designs are compliant with relevant regulatory requirements. * Improve manufacturing efficiency by analyzing and planning process flow. * Work closely with production and support personnel to solve critical process issues, as well as develop and optimize processes. * Utilize engineering knowledge to reduce variations in manufacturing processes and improve operating efficiency. * Implement opportunities for continuous improvement. * Develop innovative solutions and recommend new manufacturing technology. * Interact with the sales team and customers to understand performance criteria, review prints, and ensure the best solution to meet the needs of the customer. How to convince us * Process Engineer with 0-5 years' experience. * B.S. Mechanical, Chemical, or Industrial Engineering preferred. * Strong aptitude in problem solving using critical and analytical thinking. * Strong verbal and written communication and technical writing skills. * Ability to work in a team environment and under direct supervision. * Possess detail-oriented and organizational skills with the ability to work on clearly defined projects. * Flexibility to work various shifts to accommodate and support production. * Strong working knowledge of Microsoft Office products and AutoCAD. What we offer * Medical * Dental * Vision * Flexible spending * 401(k) * PTO * 12 Paid holidays * Life and disability insurance Please contact our HR department for any further questions. In the Industrial division, you will support customers with exceptional know-how in the plastics segment. Our plastics are used in almost every industry worldwide. And yet: Every industry has its own requirements for materials. The Röchling Group has been shaping industry. Worldwide. For more than 200 years. We transform the lives of people every day with our customized plastics: they reduce the weight of cars, make medication packaging more secure and improve industrial applications. Our workforce of 11.681 people is located in the places where our customers are - in 83 locations in 25 countries. Share / PDF Download

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process. The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process. ESSENTIAL DUTIES AND RESPONSIBILITIES: Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes. Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping. Interaction with the plant will be part of the daily routine. Some responsibilities are, but not limited to: Lead small projects for improvement of a process or equipment Collect data for process waste reduction Edit or create P&IDs Work alongside Process Engineers on Capital Expense Projects Conduct meetings to communicate information or collaborate on projects Serve as a back-up for the Quality Lab Safety EDUCATION AND EXPERIENCE: High School diploma required. Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred) All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow. Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels. The resident expert regarding process technology. Responsible for investigating and implementing new process technology at the plant. The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant. This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication. GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management. Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture. The Engineer is expected to spend a significant amount of time on the floor. ESSENTIAL DUTIES & RESPONSIBILITIES: Safety Assume a leadership position at the facility in partnership with the shift supervisors. Activities include resolution and communication regarding safety issues. Execute on scheduled PHA's and JSA's. Proactively monitor area and remediate potential safety issues. Use DAKOTA software as a tool for compliance and environmental, health and safety. Use the tool to report incidents, near misses, and non-conformances. LEAN Culture Develop and execute upon “standard work” activities. Assume responsibility for assigned activities on the Engineering Tier and other accountability boards. Conduct “GEMBA Walks” daily. Use walks as the primary means of education and communication of expectations. Improve productivity through elimination of non-value-added activities. Apply Engineering principles and methodologies to Improve productivity and eliminate waste. Product Quality Work to maximize equipment efficiency and quality for output. Member of the facility QIC. Ensure identification of root cause and subsequent prevention of future customer complaints. Assist in the training of operators with a focus on quality critical product specifications and process parameters. Capable of equipment troubleshooting and process design. EDUCATION: Bachelor's degree from four or 5-year college or university. B.S. in Mechanical, Chemical, Electrical or Controls Engineering. EXPERIENCE: Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES: Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology. BENEFITS: Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Since 1985, our core business has been enteral device product development, design, manufacturing, and engineering in a state-of-the-art facility near Cleveland, Ohio. AMT's steady growth consistently creates job opportunities in Northeast Ohio. We are always searching for new talent and would love for you to join our team! We strive to keep the small company feeling while still reaching users all over the globe. This position is 100% on-site in Brecksville, OH. Position Summary: Develop, implement, maintain and support activities for quality improvement and manufacturing programs. Support the CAPA program and address customer complaints. Duties and Responsibilities: This list is not comprehensive but meant to represent the most common or important duties of the position. Other duties will be required and/or assigned. * Product testing and evaluation * Maintain employee training * Annual sterilization testing * Lead product quality investigations to a successful conclusion * Execute risk assessments, collect supporting information and provide recommendations for management consideration * Interface with other departments to provide guidance on CAPA completion * Provide technical guidance to QA and QC personnel * Represent quality interests and concerns on project teams * Support manufacturing, new product development, and regulatory to ensure systems are compliant with all internal and external requirements * Investigate causes of quality problems identified at incoming inspection, manufacturing and final QC inspection * Collect, analyze, trend and communicate quality data throughout the organization * Identify and help facilitate continuous improvement, corrective and preventive * Resource in Engineering Change Order review process * Mentoring, education and training of QA personnel * Assume additional responsibilities as necessary at the discretion of QA * Develop programs and methodologies for analyzing and presenting quality system data * Identify program opportunities for improvement and drive procedure updates when required * Adhere to and ensure compliance with Quality System SOPs, work instructions, drawings, Good Manufacturing Practices (GMP), ISO, and FDA requirements Supervisory Responsibilities: None Requirements Minimum Qualifications: * Four Year degree, preferably in a technical discipline * 3-5 years related experience in a regulated environment, preferably medical device * Proficiency with MS Office * Familiarity with use of mechanical and electrical test equipment * Knowledge of commonly used concepts, practices, and procedures related to medical device manufacturing * Ability to analyze and aggregate data using statistics * Experience preferred with ISO 13485, ISO 14971 and FDA QSR for Medical Devices Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures and/or governmental regulations. Ability to write reports, business correspondence and/or procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, vendors, non-engineers and/or the general public. Mathematical Skills: Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Certificates, Licenses, Registrations: Maintains a valid Driver's License. Essential Job Functions: Critical features of this job are described below. They may be subject to change at any time due to reasonable accommodation or other reasons. * Mental: Must be able to effectively communicate with others; complete and understand complex analysis of numbers; read, analyze and interpret written materials; meet and exceed company standards; ensure compliance with company policies; respond appropriately to feedback to make improvements; maintain positive working relationships; troubleshoot and solve problems. * Physical: Must be able to hear and verbally communicate for hours at a time, use computer equipment, electrical and general hand tools. Moderate noise level and limited exposure to physical risk. Knowledge, Skills, and Abilities Required: Knowledge of modern business communication, office procedures and methods. Skill to use a personal computer and various software packages such as Microsoft Office Suite. Ability to establish priorities, work independently with minimal supervision, and facilitate teamwork. Equipment Used: Telephones, computer, other office equipment as needed, electrical and general hand tools. Special/ Additional Requirements: Persons in this position may be required to pass a drug, alcohol, and/or criminal background check. AMT is an Equal Opportunity/Affirmative Action Employer. Benefits: * Insurance: AMT offers major medical, dental, and vision insurance at the first of the month following 30 days of service. * Other Benefits: AMT offers several other voluntary benefits including hospital indemnity, critical illness, term life insurance & long term disability (company paid), among others. * 401k: AMT matches 100% of your contribution, up to 3% of your salary. * Paid Time Off (PTO): In addition to nine paid holidays, AMT provides employees with paid time off (determined by length of service), starting on day one Other Exciting Perks! * Family-oriented, Positive Working Environment * Discretionary Yearly Raises * On-site Vending & Gym * Annual Employee Appreciation Picnic * Tuition Reimbursement * Employee Referral Bonus Program * Employee Assistance Program

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: ● Day to day support of product and process operations on a business critical asset(s) ● Be a business partner to the site leadership team ● Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. ● Continually improve & optimize current products through variation reduction. ● Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. ● Develop control strategies for sustaining all continuous improvement projects. ● Initiate, manage & participate in safety, quality, cost & process improvement projects. ● Provide ongoing process evaluation-including trials & capability studies. ● Implementation of new equipment & operating procedures. ● Mentoring other process engineers and operations personnel. ● Developing and implementing technical training. ● Scoping and executing capital projects ● Participating, leading and sponsoring various task teams. ● Assisting in the development of long-term strategies. Qualifications Essential: ● Minimum of two (2) years of experience in operations, engineering, or a related field. ● Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. ● Ability to develop, implement, monitor, measure, and control functional improvement plans. ● Problem solving, decision analysis, situation appraisal skills. and strong project management skills and ability to manage multiple concurrent priorities. ● Lead in a positive and collaborative manner and ability to influence others. ● Approachable, effective in giving/receiving feedback. ● Strong presentation and facilitation skills. ● Strong PC skills - MS Office, Lotus Notes, MINITAB, AutoCAD, QSI and QIS experience a plus. ● Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. ● Flexibility on work hours (on call after hours/weekend as needed) Preferred: ● Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. ● Experience in a 24/7 environment is preferred. ● Experience with Controls, instrumentation, PLC knowledge also a plus. ● Previous experience with PSA / web based processes. ● Web handling experience Education: ● BS Degree in mechanical or chemical engineering required from an accredited college or university. Additional Information The salary range for this position is $82175 - $100,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

Requirements COMPETENCIES: · Problem solving techniques such as A3, 8D, DMAIC · Engineering principles · Project management · Data analysis · Professional communication and collaboration PREFERRED QUALIFICATIONS: Education: · Bachelor's Degree in related Engineering field. Minimum of 2 years experience in a manufacturing environment. Experience and/or Training: Ideal candidate would be a “hands-on” person with shop floor experience. Previous experience with Project Management and one of the focus areas below: · Chemical Engineering, with background in surface preparation and coating systems · Thermal Processing / Metallurgy, with background in powdered metals and sintering · Automation / Controls, with background in multi-station automated production lines Travel Requirements: · Occasional - up to 10% What We Offer: · Comprehensive Health Benefits: Enjoy medical, dental, and vision coverage for positions of 30+ hours/week. · Health Savings Account: Benefit from annual employer contributions to your HSA. · Company-Provided Insurance: We offer life insurance, accidental death and dismemberment coverage, and short-term disability insurance. · Voluntary Insurance Options: Choose additional coverage for yourself, your spouse, and your children, including critical illness, accident, hospital indemnity, and long-term disability insurance. · 401(k) Plan: Take advantage of our 401(k) with matching contributions, fully vested from day one. · Educational Support: Access tuition reimbursement and scholarship opportunities to further your education. · Lifestyle Reimbursement: Receive a $150 Amazon gift card upon completion of your annual physical. · Wellness Program: Participate in health coaching, monthly webinars, quarterly challenges, and earn gift card incentives for participation and earning points. · Safe Work Environment: Work in a clean and safe environment. · Generous Paid Time Off: Enjoy 14 paid holidays, including a holiday shutdown between Christmas and New Year's, plus paid vacation available from day one. · Paid Parental Leave: Take advantage of paid parental leave to support your family.

Job DescriptionDescription: The Process Engineer is responsible for engineering and process support of production, as measured by labor utilization, defect elimination, and scrap reduction. This person will champion the department's activities in direct support of the continuing growth in profitability through operational excellence by utilizing lean manufacturing tools with consistent application of a team-based approach. ESSENTIAL DUTIES and RESPONSIBILITIES: · Develops, evaluates, and improves manufacturing methods. · Solves problems confronting manufacturing performance, directly or indirectly. Identifying root cause, implementing corrective actions, sustaining improvements, and identifying support as required. · Analyzes and plans workforce utilization, space requirements, workflow and design layouts of equipment and workspace for maximum efficiency. · Must maintain an entrepreneurial spirit, not be afraid to take risks, celebrate successes of others, and take responsibility for actions and the results of efforts. · Estimate production times, staffing requirements and related costs to provide information for management decisions. · Proactively identify and implement process improvement opportunities throughout the company. · Develop and maintain work standards supporting company strategies to promote efficient staff and facility utilization including documentation of operational procedures, observations, meetings and required follow up. · Conducts audits in alignment with ISO 9001, IATF 16949, and ISO 14001 standards · Analyzes methods and operations, develops improvement plans, implements changes, and measures results. · Confers with vendors to determine product specifications and arrange for purchases of equipment, tooling, materials, or parts, and evaluates products according to specification and quality standards. · Leads capital projects to improve process capability, manufacturing capacity, and operational effectiveness. · Participates in and supports the Company's Six Sigma initiatives. · Participates and leads kaizen events to improve productivity and reduce waste. · Work with management team to identify & lead continuous improvement projects utilizing lean & six sigma principles that drive operational excellence & improve profitability. · Through execution of lean initiatives, drive performance excellence and embrace the role of a change agent for the company. · Promote, educate, and instill a culture of waste identification and elimination throughout the manufacturing operation by utilizing Lean Manufacturing concepts and the principles of Kaizen (Continuous Improvement). · Must be willing to travel, work extended hours and weekends as required to perform the objectives of this function. Requirements: COMPETENCIES: · Problem solving techniques such as A3, 8D, DMAIC · Engineering principles · Project management · Data analysis · Professional communication and collaboration PREFERRED QUALIFICATIONS: Education: · Bachelor's Degree in related Engineering field. Minimum of 2 years experience in a manufacturing environment. Experience and/or Training: Ideal candidate would be a “hands-on” person with shop floor experience. Previous experience with Project Management and one of the focus areas below: · Chemical Engineering, with background in surface preparation and coating systems · Thermal Processing / Metallurgy, with background in powdered metals and sintering · Automation / Controls, with background in multi-station automated production lines Travel Requirements: · Occasional - up to 10% What We Offer: · Comprehensive Health Benefits: Enjoy medical, dental, and vision coverage for positions of 30+ hours/week. · Health Savings Account: Benefit from annual employer contributions to your HSA. · Company-Provided Insurance: We offer life insurance, accidental death and dismemberment coverage, and short-term disability insurance. · Voluntary Insurance Options: Choose additional coverage for yourself, your spouse, and your children, including critical illness, accident, hospital indemnity, and long-term disability insurance. · 401(k) Plan: Take advantage of our 401(k) with matching contributions, fully vested from day one. · Educational Support: Access tuition reimbursement and scholarship opportunities to further your education. · Lifestyle Reimbursement: Receive a $150 Amazon gift card upon completion of your annual physical. · Wellness Program: Participate in health coaching, monthly webinars, quarterly challenges, and earn gift card incentives for participation and earning points. · Safe Work Environment: Work in a clean and safe environment. · Generous Paid Time Off: Enjoy 14 paid holidays, including a holiday shutdown between Christmas and New Year's, plus paid vacation available from day one. · Paid Parental Leave: Take advantage of paid parental leave to support your family.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 3,000 people across North America. The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow. Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels. The resident expert regarding process technology. Responsible for investigating and implementing new process technology at the plant. The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant. This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication. GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management. Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture. The Engineer is expected to spend a significant amount of time on the floor. ESSENTIAL DUTIES & RESPONSIBILITIES: Safety Assume a leadership position at the facility in partnership with the shift supervisors. Activities include resolution and communication regarding safety issues. Execute on scheduled PHA's and JSA's. Proactively monitor area and remediate potential safety issues. Use DAKOTA software as a tool for compliance and environmental, health and safety. Use the tool to report incidents, near misses, and non-conformances. LEAN Culture Develop and execute upon “standard work” activities. Assume responsibility for assigned activities on the Engineering Tier and other accountability boards. Conduct “GEMBA Walks” daily. Use walks as the primary means of education and communication of expectations. Improve productivity through elimination of non-value-added activities. Apply Engineering principles and methodologies to Improve productivity and eliminate waste. Product Quality Work to maximize equipment efficiency and quality for output. Member of the facility QIC. Ensure identification of root cause and subsequent prevention of future customer complaints. Assist in the training of operators with a focus on quality critical product specifications and process parameters. Capable of equipment troubleshooting and process design. EDUCATION: Bachelor's degree from four or 5-year college or university. B.S. in Mechanical, Chemical, Electrical or Controls Engineering. EXPERIENCE: Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES: Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology. BENEFITS: Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. GENERAL PURPOSE OF THE JOB: During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process. The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process. ESSENTIAL DUTIES AND RESPONSIBILITIES: Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes. Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping. Interaction with the plant will be part of the daily routine. Some responsibilities are, but not limited to: Lead small projects for improvement of a process or equipment Collect data for process waste reduction Edit or create P&IDs Work alongside Process Engineers on Capital Expense Projects Conduct meetings to communicate information or collaborate on projects Serve as a back-up for the Quality Lab Safety EDUCATION AND EXPERIENCE: High School diploma required. Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred) All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: ● Day to day support of product and process operations on a business critical asset(s) ● Be a business partner to the site leadership team ● Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. ● Continually improve & optimize current products through variation reduction. ● Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. ● Develop control strategies for sustaining all continuous improvement projects. ● Initiate, manage & participate in safety, quality, cost & process improvement projects. ● Provide ongoing process evaluation-including trials & capability studies. ● Implementation of new equipment & operating procedures. ● Mentoring other process engineers and operations personnel. ● Developing and implementing technical training. ● Scoping and executing capital projects ● Participating, leading and sponsoring various task teams. ● Assisting in the development of long-term strategies. Qualifications Essential: ● Minimum of two (2) years of experience in operations, engineering, or a related field. ● Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. ● Ability to develop, implement, monitor, measure, and control functional improvement plans. ● Problem solving, decision analysis, situation appraisal skills. and strong project management skills and ability to manage multiple concurrent priorities. ● Lead in a positive and collaborative manner and ability to influence others. ● Approachable, effective in giving/receiving feedback. ● Strong presentation and facilitation skills. ● Strong PC skills - MS Office, Lotus Notes, MINITAB, AutoCAD, QSI and QIS experience a plus. ● Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. ● Flexibility on work hours (on call after hours/weekend as needed) Preferred: ● Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. ● Experience in a 24/7 environment is preferred. ● Experience with Controls, instrumentation, PLC knowledge also a plus. ● Previous experience with PSA / web based processes. ● Web handling experience Education: ● BS Degree in mechanical or chemical engineering required from an accredited college or university. Additional Information The salary range for this position is $82175 - $100,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.