Reliability engineer jobs in San Diego, CA - 281 jobs

WE ARE:Monterey Technologies, Inc. applies human-centered systems engineering to the design and development of complex, critical systems. Our human modeling approach helps our clients deliver improved human and system performance at lower life cycle costs. Our human-centered approach to problem-solving ensures that we understand the human dimension before recommending technology solutions. THE ROLE: As a Principal System Safety Engineer, your primary responsibility will be to perform safety analysis in Cameo. Other duties may include traditional systems engineering functions, human-systems integration (HSI), and/or model-based systems engineering (MBSE) scope. In this role, you will work independently to apply MTI's user-centered research, analysis, design, and development process. Your primary focus will be to lead the MTI team in applying SE principles to create highly effective solutions for complex, critical missions Security Clearance Required Due to federal contract requirements, applicants must be U.S. persons and eligible for a U/S. security clearance Your Responsibilities: Lead system safety engineering activities in accordance with MIL-STD-882E, performing hazard identification, risk assessment, and mitigation planning across the full system lifecycle to ensure compliance with DoD safety requirements and support program certification and acceptance. Evaluate customer requirements for System Safety and determine vehicle compliance. Conduct System Safety analyses to support safety mitigation recommendations for design solutions and design changes. Document analysis reports and recommendations. Support System Engineering Department in the development of the System Specification Document - Safety requirement management - definition, connectivity, traceability, validation. Create Hazard Tracking System (HTS) and Preliminary and Functional Hazard Analysis (PHA & FHA) - as required, to determine compliance with contract and/or System Specification Generate, as required, System Safety reports to be submitted to the Customer. Manage end-to-end traceability of the Hazards mitigations for the assigned systems. Create and manage Human/System Interface Databases, Hazard Logs, Risk Registers, and manage Hazard Tracking. Work with the HW and SW engineers, identifying Safety hazards and mitigation strategy. Your Experience: Ability to obtain and maintain a US DoD Security Clearance A bachelor's degree in a technical or engineering field. An advanced degree is a plus+ A minimum of 12 years of relevant work experience is generally required. Experience with MIL-STD 882E is a MUST Strong communication skills, with the ability to articulate SE concepts and recommendations to diverse audiences. Desire to advance expertise in human-centered SE. Ability to collaborate effectively and positively as part of a high-performing team. Your Benefits: Flexible Work environment Generous 401(k) plan Paid vacation and sick leave Competitive salary commensurate with education, background, and experience Health, Vision, Dental, Short and Long Term insurance benefits Pet-Care Insurance Cancer Insurance Hospital Indemnity Insurance Basic Life Insurance Legal Insurance Critical Illness Insurance Notice: Don't meet every single requirement? That's ok! At MTI we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. MTI is an equal opportunity employer. Applicants will receive consideration for employment without regard to age, sex, race, color, religion, national origin, genetics, disability, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. All selected candidates will be required to submit to a pre-employment background check.

Kennedy Jenks is seeking a Drinking Water Process Engineer to join our team in California and contribute to projects focused on drinking water treatment, water reuse, and advanced water purification. This role offers the opportunity to work on both local and national projects, applying your technical expertise to complex water treatment challenges. Candidates at all stages of their career who are ready to take on increasing technical responsibility, contribute to innovative solutions, and collaborate with experienced engineers are encouraged to apply. Key Responsibilities Contribute technical expertise in municipal drinking water treatment, water reuse, and advanced water purification, including evaluating treatment processes, selecting appropriate methods, conducting engineering studies, and optimizing operations. Support project teams and client service managers in project pursuits, meetings, and technical discussions. Participate in feasibility studies, facility planning, and pilot testing for water treatment projects. Prepare technical deliverables, including basis of design reports, preliminary and detailed engineering drawings, specifications, process flow diagrams, and process instrumentation diagrams. Evaluate and optimize operations of existing water treatment facilities. Provide guidance and mentorship to less experienced engineers when appropriate, and collaborate with senior engineers on technical solutions. Stay current on industry standards, emerging technologies, and regulatory requirements. Qualifications BS or MS in Civil, Environmental, Chemical Engineering, or related discipline 5+ years of experience in drinking water treatment engineering, including process design, system optimization, or operational evaluation Engineer-in-Training (EIT) or Professional Engineer (PE) license; PE preferred or ability to obtain Strong technical, analytical, and problem-solving skills Ability to work collaboratively on multidisciplinary teams and communicate effectively with clients and project staff Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Salary range for this position is expected to be between $120,000 and $210,000, and may vary based upon education, experience, qualifications, licensure/certifications, and geographic location. This position is eligible for performance and incentive compensation. Benefits Summary: Kennedy Jenks offers a comprehensive benefits package, including medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs. #LI-hybrid

At Apple, we work every single day to craft products that enrich people's lives. Do you love working on challenges that no one has solved yet? As a member of our cellular standards group, you will have the unique and rewarding opportunity to shape the global wireless industry and contribute to upcoming products that will delight and encourage millions of Apple's customers every single day! In this technical role, you will be at the center of our cellular standards group, responsible for promoting the wireless technologies of our innovative wireless SoC products. You will have the chance to create algorithms and architectures of wireless communication systems, as well as collaborate with extraordinary RF/analog, HW, SW designers and architects to design SoC products to millions of Apple customers! Ph.D. with a focus on communication systems, signal processing or AI/ML for wireless communication Experiences in 3GPP standardization in 3GPP RAN4 Strong understanding of communication theory and relevant algorithm design experience on, including but not limited to, timing recovery, automatic gain control, modulation, channel estimation, equalization, MIMO signal estimation and detection, channel coding and error correction, and beam forming algorithms Strong understanding of RF fundamentals, wireless communication theory, and system design. Knowledge in existing wireless communication protocols, such as 5G/LTE/WCDMA/GSM, 802.11a/b/g/n/ac/ax/be, 802.11ad/ay or Bluetooth/BLE. Working knowledge of wireless communication systems (e.g., OFDM/MIMO, etc.). Proven experience in the algorithm development and implementation design of communication systems or signal processing algorithms, and ability to develop and implement performance tuning strategies and optimizations. Experience with Matlab or Python and/or C/C++ for algorithm development, modeling, and simulation. Fluency in written and spoken English and excellent communication skills Motivated to collaborate and contribute as a team, and able to deliver ambitious tasks in a timely manner. BS and 10+ years of relevant experience is required.

The Senior Site Reliability Engineer (SRE) will be responsible for ensuring the availability, performance, scalability, and operational efficiency of the Informatix cloud platform. This role is focused on reducing manual operations work (toil), automating system reliability, and ensuring production-grade observability. The ideal candidate is a systems-focused engineer who is passionate about uptime, incident response, and continuous improvement through engineering solutions. Essential Duties and Responsibilities Serve as a primary contributor to the on-call rotation to maintain 24/7 uptime for production systems. Proactively, monitor, and continuously improve SLAs, SLOs, and SLIs across critical services. Develop and maintain robust observability tooling including logging, metrics, and tracing (e.g., Azure Monitor, OpenTelemetry, Prometheus). Proactively conduct postmortems and root cause analysis; implement fixes to prevent repeat incidents. Identify and eliminate manual operational toil through scripting and automation. Design and maintain automated incident detection and response systems. Establish and maintain runbooks, playbooks, and escalation protocols for system support. Contribute to chaos testing and failure injection to proactively uncover weaknesses. Promote a culture of operational excellence through data-driven reliability practices. Proactively communicating status Requirements The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 5+ years of experience in Site Reliability Engineering, systems engineering, or DevOps roles. Expertise in monitoring and observability platforms (e.g., Grafana, Prometheus, ELK, Azure Monitor). Solid background in incident response, root cause analysis, and on-call rotations. Deep knowledge of Microsoft Azure, including containerized services (AKS), networking, and storage. Strong automation and scripting experience (e.g., Python, Bash, PowerShell). Familiarity with IaC tools such as Terraform, Bicep, or ARM templates. Experience implementing SLIs/SLOs, operational dashboards, and error budgets. Comfortable designing for resiliency, failover, and graceful degradation. Knowledge of compliance frameworks (e.g., SOC 2, HITRUST, IEC 62304) is a plus. Strong written and verbal communication with a focus on transparency and learning. Education and Experience BS/MS in Computer Science, Engineering, or related technical field preferred. 5+ years in production engineering roles with direct ownership of critical systems. Microsoft certifications a plus For roles based in the United States that require access to hospital facilities, must be eligible for and maintain credentials at all required hospitals, including meeting any applicable physical requirements or vaccination requirements (including the COVID-19 vaccine, as applicable). ATEC is committed to providing equal employment opportunities to its employees and applicants without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, or any other protected status in accordance with all applicable federal, state or local laws. Further, ATEC will make reasonable accommodations that are necessary to comply with disability discrimination laws. Salary Range Alphatec Spine, Inc. complies with state and federal wage and hour laws and compensation depends upon candidate's qualifications, education, skill set, years of experience, and internal equity. $135,000 to $145,000 Full-Time Salary Range Please Note: The employer will not sponsor applicants for work visas for this position.

CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a skilled and experienced Process Engineer III/ IV with deep expertise in small molecule manufacturing to join our engineering consulting team. This role combines technical leadership with strategic client engagement, supporting process design, scale-up, optimization, and regulatory compliance across a variety of pharmaceutical and chemical industry projects. The Process Engineer III will lead the design and execution of process scopes-such as unit operations, systems, or facility areas-on small to medium-sized projects. You will manage scope, budget, and schedule, while maintaining clear communication with clients and internal teams. This role also includes mentoring junior staff, contributing to high-quality deliverables, and supporting capital project planning and regulatory alignment. This position can be based near any CRB location Key Responsibilities * Lead and support client projects focused on small molecule API process development, scale-up, and manufacturing optimization. * Conduct site assessments, gap analyses, and provide recommendations for process improvements and compliance. * Develop process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), and mass/energy balances. * Translate client requirements into actionable design scope and document decisions, open issues, and action items. * Identify and escalate scope changes or design deviations to project leadership. * Collaborate with cross-functional teams including architecture, mechanical, electrical, and construction. * Prepare technical reports, proposals, and presentations for internal and client stakeholders. * Support capital project planning including feasibility studies, equipment selection, and facility design. * Ensure alignment with industry standards including cGMP, FDA, EMA, and ICH guidelines. * Participate in advanced project activities such as: * Technical bid tabulations * Vendor package management * Factory acceptance testing * Risk assessments (e.g., HAZOP, HACCP) * 3D model reviews and coordination * Sequence of operations and functional specification reviews * Mentor junior engineers and design staff. * Lead system design programming and planning with support from senior engineers. * Participate in cross-discipline squad checks and drive overall project quality. Qualifications Minimum Qualifications * Bachelor's or Master's degree in Chemical Engineering or a related discipline (ABET-accredited). * Minimum of 5 years of experience in small molecule process engineering, preferably in a consulting or client-facing role. * Strong understanding of chemical synthesis, purification, and formulation processes. * Experience in design firm or operating company settings within a related industry. * Strong written and verbal communication skills. * Intermediate experience with applicable industry and regulatory guidance and building codes. * Advanced technical knowledge and experience with small molecule API manufacturing equipment and utility systems, such as chemical reactors, filters, centrifuges, dryers, vacuum pumps, scrubbers, purified water, process compressed gases, and engineered heat transfer fluid systems. * Experience designing and implementing engineering controls for containment of highly potent APIs. * Experience with cGMP practices within regulated industries (FDA, EMA, JP, etc.). Preferred Qualifications * EIT or PE certification. * Experience coordinating and managing design within project teams and with external partners. * Familiarity with commissioning, startup, qualification, and troubleshooting of process systems. * Experience with regulatory environments and validation documentation. * Prior experience in engineering consulting or client services. * Familiarity with process safety, risk assessments, and HAZOP studies. * Demonstrated experience leading a small team of process engineers on complex engineering design projects. The pay range for a candidate selected for this position who is based in San Diego is typically $120,125 to $175,000 annually. The base salary range represents the low and high end of the salary range for this position. The selected candidate's actual pay will be based on various factors, including but not limited to work location, qualifications, and relevant experience. In addition, CRB offers a total rewards package that includes comprehensive insurance coverage as well as the opportunity to participate in one or more annual incentive programs based on company and individual performance. Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Reports to the Process Engineering Manager: This position's primary focus is to provide process engineering support and optimization assistance for MPLX's facilities including supporting operations in troubleshooting, process modeling, and PHAs. This person will collaborate with business development, engineering, operations, and the capital projects groups to develop, evaluate, and advance projects. All work will be performed in compliance with company standards, procedures, and government requirements. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. The actual position title and pay grade will be based on the selected candidate's experience and qualifications. KEY RESPONSIBILITIES: * Work closely with Operations and Business Development to troubleshoot process related bottlenecks. * Provide process support for facility startups and shutdowns. (Planned and Unplanned) * Generate monthly KPI (Key Process Indicators) reports for facilities. * Provide process support for PHAs and LOPAs of facilities. * Assist Operations in the development and review of CPVs, SOLs, and Operating Procedures. * Provide process engineering support for root cause failure analysis of equipment, instrumentation, and process controls. * Participates in the development and review of new G&P standards including engineering, operations, PSM, environmental, and health and safety. * Must be able to handle assignments and projects with minimal supervision and complete within acceptable time standards. * Travel expected up to 33% based on location. Other MPLX locations may be considered. EDUCATION AND EXPERIENCE: REQUIRED: * Bachelor's Degree in Engineering from an accredited College or University * Minimum of 3 years of Process Engineering experience * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Valid Driver's License * Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. PREFERRED: * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Chemical Engineering degree * PE License * Broad process knowledge of compressor stations, natural gas cryogenic processing facilities, and light end fractionation processes. * 7+ years in the oil & gas, chemical, pharmaceutical, or manufacturing industry SKILLS: Must have excellent verbal and written communication skills to effectively communicate with all levels of individuals/employees. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Midland, Texas Job Requisition ID: 00020052 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 600 N Marienfeld St Ste 450 Box 140 Additional locations: Bridgeport, West Virginia, Cadiz, Ohio, Canonsburg, Pennsylvania, Carlsbad, New Mexico, Denver, Colorado Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Join nVent as a Process Engineer and bring a scientific lens to our coatings and sealing operations in a high-volume manufacturing environment. You'll lead improvements across powder coating systems and Foam-in-Place (FIP) processes, optimizing pre‑treat, application, and curing stages to boost quality, efficiency, and sustainability. From troubleshooting defects to reducing powder waste and cure times, you'll apply chemical and mechanical engineering expertise to modernize equipment and elevate our finishing capabilities - all while partnering with Operations, Quality, Maintenance, and suppliers to deliver reliable, best‑in‑class finishes. This role will work onsite, 5 days/week, in Anoka, MN. WHAT YOU WILL EXPERIENCE IN THIS POSITION: * Optimize Production Systems: Support manual, semi-automated, and automated processes by collaborating with operators, team leaders, and value stream managers to improve layouts, material flow, and line balancing. * Lead Coatings & Foam Projects: Own projects for Powder Coat Paint systems and Foam-in-Place (FIP) technology, driving improvements in efficiency, throughput, and quality. * Champion Continuous Improvement: Apply Lean principles and lead Kaizen events to reduce waste, enhance safety, and improve delivery performance. * Lead Capital Projects: Submit capital equipment (CapEx) requests, coordinate integration of new equipment, and ensure seamless execution. * Troubleshoot & Innovate: Quickly resolve paint adhesion, curing, and application issues while exploring new methods to elevate our processes. * Communicate Impact: Present updates and results to leadership and multi-functional teams. YOU HAVE: * Education: Bachelor's (B.S.) degree in Chemical Engineering, Polymers & Coatings, Chemicals, Materials, Mechanical Engineering, or related field. * Experience: Previous engineering experience in a manufacturing environment with hands-on exposure to chemical applications, coatings, FIP/polyurethane foam, or materials processing preferred. * Technical Knowledge: Solid foundation in chemistry, coatings, and materials science. Working knowledge of pretreatment (zirconium/iron/zinc phosphate), RO water systems, booths/ovens/conveyors, and powder reclaim/transfer efficiency preferred. * Tools & Tech: Familiarity with SolidWorks, AutoCAD, MS Office, ERP systems (such as JD Edwards), Product Lifecycle Management software (PLM, such as Enovia), and/or project management tools like Smartsheet. WE HAVE: * A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day * nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. * Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** * Commitment to strengthen communities where our employees live and work * We encourage and support the philanthropic activities of our employees worldwide * Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money * Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: * Innovative & adaptable * Dedicated to absolute integrity * Focused on the customer first * Respectful and team oriented * Optimistic and energizing * Accountable for performance * Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $76,000.00 - $141,100.00 Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: * Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. * A 401(k) retirement plan and an employee stock purchase plan - both include a company match. * Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth. #LI-JM2 #LI-Onsite

and Objective Design and implementation of process equipment strategies, coordinating process activities with other discipline engineers within the company. Need to possess an understanding of mass balances, fluid transfer and energy balance, as well as, problem analysis. Candidate should be a professional, self-motivated, and energetic individual with excellent communication and inter-personal skills. Essential Functions Develop process design basis and select unit operations Prepare process flow & piping and instrumentation diagrams Prepare mass and energy balances Size and specify process and process utility equipment Equipment procurement and bid evaluation Assist project management with the development of project scope, budget and schedule for all process related work Help coordinate the schedules and work of contractors for process equipment installation Oversee process and utility equipment installations Start-up and Commissioning Required Education, Skills and Experience Bachelor's degree in a relevant field of study. Proficiency in MS Office suite. AutoCAD experience is a plus. Strong technical and writing skills Three (3) plus years of experience in an industrial manufacturing setting or working as a consulting process engineer is preferred Spanish or Portuguese language skills are a plus, but not required Travel Requirements Travel requirements are project specific and variable but typically average 10-30%. Compensation includes base salary plus eligibility for performance bonus, profit share, 401(k) employer contribution, health/dental/disability/life benefits, flexible spending account(s) and paid time off. Equal Opportunity Employer.

Provide Process Engineering and Test Support as part of a multi-disciplinary product development team responsible for the design of systems for genetic analysis, with a focus on consumables. Develop methods for assembly of complex disposable devices (plastics joining, adhesives dispensing, precision assembly work, some use of automated equipment). Own and execute test plans verifying assembly performance against ship/store and use-case conditions. Optimize assembly processes through the execution of experimental plans, including statistical design of experiments. Support Critical Parameter Management, designing and executing experiments to evaluate the relationship of process inputs to assembly outputs. Establish windows for process variables leading to acceptable output metrics. Use precision measurement equipment to monitor part quality. Evaluate repeatability of metrology tools. Assist in troubleshooting product assembly processes, leveraging problem solving techniques such as fish bone an 8D analyses. Analyze and organize data for reports and discussion using Excel or Matlab. Communicate results of activities to the rest of the team using MS Word or Powerpoint. Skills: 2+ years of experience within an R&D or product manufacturing group Experience with products containing miniature/micro-fluidics and chemistry/assay components is advantageous. Education: B.S. in Mechanical Engineering, Bioengineering, Chemistry or related field Qualifications Process Engineering and Test Support as part of a multi-disciplinary product development team Develop methods for assembly of complex disposable devices (plastics joining, adhesives dispensing, precision assembly work, some use of automated equipment). Experience with products containing miniature/micro-fluidics and chemistry/assay components is advantageous. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Join our fast-paced and passionate team as a Robotics Process Engineer 1. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: Work independently and in a team while over-communicating with the manager and the teammates. Use educational background, experience and reasoning skills to plan, collect and analyze data/information and communicate the process and the results for assigned tasks. Use tenacity, patience, self-discipline and passion for excellence to responsibly make and keep made commitments. Use every opportunity to grow competency thru mentorship, curiosity, communication, exposure and initiative. Requirements This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: A bachelor's degree in mechanical engineering, Physics, or a related field and a minimum Skills: Basic understanding of material properties, components, mechanisms, fabrication methods. Basic understanding of structural, heat and mass transfer theory. Basic knowledge of mechanical CAD software and quantitative analysis/programming tools and hands-on experience with basic machine shop tools. Basic knowledge of optical concepts such as polarization, refraction, diffraction, lensing. Basic knowledge of simple software scripting tools such as Matlab, or Python. Startup Mindset: You're creative, flexible, and eager to wear multiple hats. You're passionate about building systems from the ground up and comfortable with ambiguity and change. Benefits The expected annual salary range for this position is $70,000-$120,000. As a full-time employee, you will be eligible for Monarch's comprehensive benefits package, which includes: Medical, Dental, and Vision insurance Fidelity 401(k) plan with 4% employer matching 20 paid time off (PTO) days per year 13 paid company holidays 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description MAST Technologies is seeking a highly hands-on Process Engineer 4 to drive operational excellence within our specialized manufacturing facility. This critical role blends core process optimization principles with direct, daily operations support. The Engineer will be responsible for executing, monitoring, and controlling key process variables to ensure repeatable, high-quality production. Success in this position requires being the primary technical resource for troubleshooting floor-level issues and spearheading continuous improvement projects to optimize processes for the highly engineered materials used in our aerospace and defense applications. MAST Technologies is an industry leader in the development and manufacturing of advanced RF, microwave absorbing materials and specialty engineered products serving aerospace, defense, and high-performance industrial markets. Our product portfolio includes high-performance elastomeric components, EMI/RF absorbing materials, thermal and survivability coatings, specialty formulations, and advanced composite solutions designed to meet the most demanding performance requirements. Job Accountabilities: Hands-On Process Execution & Floor Support Directly support daily manufacturing operations by overseeing and executing process steps on the production floor. Monitor and confirm proper setup, run parameters, and execution of each operation. Work side-by-side with operators and technicians to ensure production follows established standards, work instructions, and safety protocols. Troubleshoot process and equipment issues in real time to maintain product flow and quality. Process Monitoring, Data Tracking & Optimization Track and document all critical process variables (temperature, time, pressure, speed, torque, material consumption, yields, cycle times, etc.) for each operation. Maintain accurate, legible, and complete production and engineering documentation. Analyze trends to identify deviations and implement corrective actions. Optimize processes to improve throughput, reduce scrap, and improve consistency and repeatability. Engineering & Technical Support Participate in cross-functional engineering projects involving new and repeat business. Support RFQ/RFP development and cost estimates by interpreting drawings, specifications, and supplier documentation. Assist in project planning, manufacturing handoff, and new product introduction activities. Create and revise technical documents, SOPs, and work instructions using tools such as AutoCAD or Inventor. Continuous Improvement Identify and implement Lean, 5S, and continuous improvement initiatives targeting process stability, cost reduction, and production efficiency. Lead small-scale improvement projects and contribute to longer-term process roadmaps. Cross-Functional Communication Interface with production, quality, maintenance, planning, suppliers, and customers as needed to support technical activities and business opportunities. Provide feedback to leadership regarding bottlenecks, quality risks, and improvement opportunities. Safety, Quality, and Compliance Demonstrate a high priority for workplace safety and product quality. Support compliance requirements including ISO9001, AS9100, and ITAR. Ensure proper handling of specialty chemicals and equipment. Other Duties May be required to lift up to 40 lbs. Perform all other duties as assigned. Job Specifications: Education: Bachelor's degree in Mechanical, Industrial, Chemical, Manufacturing Engineering, or related field. Years' Experience: 5-7+ years in manufacturing, aerospace, defense, chemicals, materials, or related process environments. Hands-on manufacturing or production engineering experience strongly preferred. Skills: Strong hands-on mechanical aptitude and comfort working on the production floor. Experience with AutoCAD, Inventor, and Microsoft Office (Word, Excel, Access). Experience in aerospace/defense manufacturing preferred. Experience working within ISO9001/AS9100 quality systems. Ability to track, analyze, and act on process data. Knowledge of Lean, Six Sigma, or continuous improvement tools a plus. Experience with PLCs, 3D modeling, and precision measurement tools beneficial. Excellent communication, time management, and organizational skills. Ability to manage multiple priorities and maintain attention to detail under pressure. High level of professionalism, discretion, and documentation discipline. Benefits: At MAST Technologies, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. MAST is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

MAST Technologies is seeking a highly hands-on Process Engineer 4 to drive operational excellence within our specialized manufacturing facility. This critical role blends core process optimization principles with direct, daily operations support. The Engineer will be responsible for executing, monitoring, and controlling key process variables to ensure repeatable, high-quality production. Success in this position requires being the primary technical resource for troubleshooting floor-level issues and spearheading continuous improvement projects to optimize processes for the highly engineered materials used in our aerospace and defense applications. MAST Technologies is an industry leader in the development and manufacturing of advanced RF, microwave absorbing materials and specialty engineered products serving aerospace, defense, and high-performance industrial markets. Our product portfolio includes high-performance elastomeric components, EMI/RF absorbing materials, thermal and survivability coatings, specialty formulations, and advanced composite solutions designed to meet the most demanding performance requirements. Job Accountabilities: Hands-On Process Execution & Floor Support Directly support daily manufacturing operations by overseeing and executing process steps on the production floor. Monitor and confirm proper setup, run parameters, and execution of each operation. Work side-by-side with operators and technicians to ensure production follows established standards, work instructions, and safety protocols. Troubleshoot process and equipment issues in real time to maintain product flow and quality. Process Monitoring, Data Tracking & Optimization Track and document all critical process variables (temperature, time, pressure, speed, torque, material consumption, yields, cycle times, etc.) for each operation. Maintain accurate, legible, and complete production and engineering documentation. Analyze trends to identify deviations and implement corrective actions. Optimize processes to improve throughput, reduce scrap, and improve consistency and repeatability. Engineering & Technical Support Participate in cross-functional engineering projects involving new and repeat business. Support RFQ/RFP development and cost estimates by interpreting drawings, specifications, and supplier documentation. Assist in project planning, manufacturing handoff, and new product introduction activities. Create and revise technical documents, SOPs, and work instructions using tools such as AutoCAD or Inventor. Continuous Improvement Identify and implement Lean, 5S, and continuous improvement initiatives targeting process stability, cost reduction, and production efficiency. Lead small-scale improvement projects and contribute to longer-term process roadmaps. Cross-Functional Communication Interface with production, quality, maintenance, planning, suppliers, and customers as needed to support technical activities and business opportunities. Provide feedback to leadership regarding bottlenecks, quality risks, and improvement opportunities. Safety, Quality, and Compliance Demonstrate a high priority for workplace safety and product quality. Support compliance requirements including ISO9001, AS9100, and ITAR. Ensure proper handling of specialty chemicals and equipment. Other Duties May be required to lift up to 40 lbs. Perform all other duties as assigned. Job Specifications: Education: Bachelor's degree in Mechanical, Industrial, Chemical, Manufacturing Engineering, or related field. Years' Experience: 5-7+ years in manufacturing, aerospace, defense, chemicals, materials, or related process environments. Hands-on manufacturing or production engineering experience strongly preferred. Skills: Strong hands-on mechanical aptitude and comfort working on the production floor. Experience with AutoCAD, Inventor, and Microsoft Office (Word, Excel, Access). Experience in aerospace/defense manufacturing preferred. Experience working within ISO9001/AS9100 quality systems. Ability to track, analyze, and act on process data. Knowledge of Lean, Six Sigma, or continuous improvement tools a plus. Experience with PLCs, 3D modeling, and precision measurement tools beneficial. Excellent communication, time management, and organizational skills. Ability to manage multiple priorities and maintain attention to detail under pressure. High level of professionalism, discretion, and documentation discipline. Benefits: At MAST Technologies, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. MAST is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

Perform a variety of duties related to the development of a cost efficient, capable process for new and existing molds providing technical expertise on challenging molds and processes. Coordinate the efforts of process engineers and project engineers to meet departmental goals and objectives. Duties: Coordinate startup of new/existing projects/production jobs, optimizing cost, efficiency and quality. Coordinate and monitor the activities of assigned process technicians, giving guidance and technical support to molding managers. Ensure process control and maintain appropriate documentation. Monitor the process of molds running in production, troubleshooting problem molds and assisting in resolving quality issues. Establish processes for new molds, document process development and changes, evaluating new tool performance and monitoring new tool design. Coordinate maintenance of molds; specify repair or alteration of molds and automation while ensuring adequate documentation is maintained. Perform designed experiments to enhance processes as well as improve yields and utilization through reduced cycle and efficient setups. Specify tooling, machine, material changes and/or process changes to ensure profitable production is maintained. Prepare setup of molding runs, follow-up on progress of tool, process and automation improvements. Assist with the design and debugging of new systems, tooling and automation. Assist in maintaining a clean and safe work environment. Provide functional and technical guidance to other process engineers. Other duties as assigned. Supervisory Resp: No Supervisory Responsibilities Qualifications Education and Exp: B.S. Degree in manufacturing or plastics engineering or equivalent in education or experience. 7-10 years in injection molding environment with specific exposure to machine maintenance and processing parameters and controls. Additional Information All your information will be kept confidential according to EEO guidelines.

Requirements • Bachelor's or higher degree in mechanical engineering or a related field • Thorough understanding of materials and their application in optical packaging • Must have strong software programming skills • Familiar with fiber optics products and working with optical fibers • Experience with adhesives & epoxies • Hands on experience with tools such as wire bonder and optical aligners Skills/Knowledge/Abilities: • Strong problem-solving skills with demonstrated track record of success • Able to work hard in a dynamic start-up environment • Capable of delivering on aggressive goals/timelines • Excellent verbal and writing communication skills • Thoughtful, fast, disciplined execution • Tenacious commitment to continuous improvement Other Special Conditions and Requirements: • Visa Sponsorship is not available for this position • Relocation is not available for this position Supervisory Responsibilities None Work Environment 80%+ of work is performed in the Fab, which is a temperature-controlled cleanroom environment that requires the use of a full-body gown, over-boots, over-hood, safety glasses, and other PPE. The use of personal protective equipment to prevent exposure to hazardous materials can be expected. Frequent gowning and de-gowning is required. Frequent interruptions, static noise, and alarms (auditory and flashing lights) can be expected. Physical Demands Frequently in a stationary position, often sitting and/or standing for prolonged periods Frequently viewing a computer monitor for prolonged periods Frequently walking around the Fab for prolonged periods Occasionally required to push and/or pull 50+ lbs objects, such as tool components Occasionally required to lift 50+ lbs and occasionally carry that amount short distances Occasionally required reach, bend, twist, squat, kneel, and stoop to access and work on tools in the Fab May often require repetitive motions involving the wrists, hands, and/or fingers May require different positions and motions in tight and confined spaces Constantly required to wear PPE Benefits Medical Dental Vision Critical Illness Company Paid Life Insurance Company Paid Disability (New Mexico) 401k Generous PTO Plan Generous Holiday Plan We are an Equal Opportunity Employer and comply with the ADA. Reasonable accommodations will be provided to qualified individuals with disabilities. We do not discriminate based on race, color, religion, sex, national origin, age, disability, or any other legally protected status. ****Recruiters or Agencies will not be considered for this position*** Salary Description $80,000 to $140,000 Yearly

Job Description Dennis Group's Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Develop process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Prepare process flow and piping and instrumentation diagrams Create process flow diagrams Prepare mass and energy balances Size and specify process and process utility equipment Equipment procurement and bid evaluation Assist project management with the development of project scope, budget and schedule for all process related work Help to coordinate the schedules and work of contractors for process equipment installation Work with clients, vendors, and suppliers to develop cost estimates and proposals Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) Oversee process and utility equipment installations Provide onsite construction start-up and commissioning support Research process engineering best practices Supporting talent growth within our organization Required Education Skills and Experience Bachelor's degree in Chemical or Process Engineering. 0-3 years of work experience or schooling developing process designs 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs 0-3 years of work experience or schooling sizing and specifying process and process utility equipment. 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

ABOUT THE BRAND: Callaway Golf is the leading manufacturer of premium golf clubs, balls, performance gear and accessories worldwide. Through an unwavering commitment to innovation, we push the limits of performance and create demonstrably superior products designed to make every golfer a better golfer. Our company is a blend of experience and diverse backgrounds, and together we look to move the game forward, and we want top-notch people to join us in that mission! By joining Callaway Golf, you also join part of the portfolio of brands within Topgolf Callaway Brands, an unrivaled tech-enabled Modern Golf and active lifestyle company delivering leading golf equipment, apparel, and entertainment, with a portfolio of global brands including Topgolf, Callaway Golf, TravisMathew, Toptracer, Odyssey, OGIO, Jack Wolfskin, and World Golf Tour ("WGT"). "Modern Golf" is the dynamic and inclusive ecosystem that includes both on-course and off-course golf. For more information, please visit ************************************* JOB OVERVIEW Working in a team environment, supports the research, design and manufacturing of Steel and Graphite Golf Shafts and Composite Materials to enhance the overall performance of new products. Responsible for the technical knowledge, design, quality and fabrication of new shaft technologies through product commercialization. ROLES AND RESPONSIBILITIES * Responsible for the research, design, product testing and evaluation of various shaft materials and composite layups as it pertains to processing and mechanical performance. * Provide input to R&D and Engineering regarding processing options during the development of new shaft design and composite layups - Design for Manufacturability (DFM). * Create and develop testing methods, guidelines and procedures to meet performance regulatory and standard requirements. * Work with R&D and Engineering to ensure process specifications, procedures, and controls related to new shaft products are well documented and communicated before launch. * Create detailed manufacturing specification documentation as required and support troubleshooting production process issues. * Complete failure analysis and customer return evaluation for Golf Steel Shafts and Composite products and utilize this data to optimize future designs. * Review and assist in the design of gauge and fixture with the aim to improve inspection functionality and part manufacturing repeatability, including reviewing accuracy of drawings to support inspection. * Complete Gauge Repeatability and Reproducibility for existing and new test standards both internally and at supplier manufacturer locations. * Communicate efficiently with Product Engineers, Program Managers and Manufacturing Supplier teams to qualify new concepts and technologies to meet production requirements. * Provide technical knowledge to continuous improvement efforts aimed at increasing productivity and yields with current products. TECHNICAL COMPETENCIES (Knowledge, Skills, and Abilities) * Proficient with MS Word, PowerPoint, Excel, and Minitab. * Proficient in reviewing composite layup designs performance and manufacturability. * Proficient in steel and composite material properties and fabrication methods. * Knowledge of GD&T and how it relates to manufacturing gage development. * Knowledge of statistical tools and continuous improvement techniques. * Good mechanical aptitude with a hands-on approach and knowledge of basic tools and instrumentation. * Be a team player with good written and verbal communication skills. * Must have demonstrated good leadership skills. * Be flexible and able to adapt to changing environments and priorities. * Must show evidence of increasing responsibility with years of experience. * Highly energetic, creative, intelligent, and logical. * Able to work extended hours in critical situations. EDUCATION AND EXPERIENCE * BS in Mechanical, Materials or Manufacturing Engineering * Minimum 5 or more years' experience in Golf Shaft design and/or Composites Engineering. * Knowledge of composite and golf shaft manufacturing processes; including hands-on experience with processing of composite materials. * Willingness and ability to travel both domestically and internationally is required. PHYSICAL REQUIREMENTS / WORK ENVIRONMENT (if applicable) * Work is performed in a designated professional office workstation and environment. * Extensive use of office equipment to include computer, calculator, copier, fax, and other business-related machines and software. * Occasionally required to lift and/or carry up to 50 pounds, regularly lift and/or carry up to 20 pounds and perform moderately demanding physical tasks. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. DISCLAIMER This job description indicates in general terms, the type and level of work performed as well as the typical responsibilities of employees in this classification and it may be changed by management at any time. Other duties may also apply. Nothing in this position description changes the at-will employment relationship existing between the Company and its employees. Distribution of this item outside of the Company without an authorized release is a violation of Company policy. DE&I and EEOC: Inclusion & Diversity: As a purpose-led, performance driven company, we strive to foster a culture of belonging based on respect, connection, openness and authenticity. We are committed to building and maintaining a workplace that celebrates the diversity of our associates, supporting them to bring their authentic selves to work every day. If your experience is close to what we're looking for, please consider applying. Experience comes in many forms, skills are transferable, and passion goes a long way. We know that diverse backgrounds and experiences make for the best problem-solving and creative thinking, which is why we're dedicated to adding new perspectives to the team and encourage everyone to apply. We look forward to learning more about you. ARE YOU READY TO MAKE THE TURN? APPLY TODAY! 70,700.00 - 88,400.00 - 106,100.00 USD Annual

The Production Process Engineer II is responsible for supporting and maintaining all large-scale USP/DSP (Upstream Production / Downstream Production) equipment and instruments to ensure the manufacturing process is continuously in operation with minimal downtime. Through process mapping and understanding, the process engineer II is responsible for developing process improvement projects, performing engineering design evaluations, creating efficiency in the USP/DSP process, and improving quality of product. The process engineer will not only account for identifying and researching background for equipment purchases and making recommendations to management. In addition will play a key role working with third party contractors to ensure the process IQ/OQ/PQ on a timely manner The independently troubleshooting capability is required. What you will do * Maintain all USP/DSP equipment and instruments at the ready-to-run status to ensure that manufacturing is continuously in operation with minimal downtime * When needed, be responsible for design, installation, and qualification of batch processing tanks, solvent recovery system, filter dryers, filtration system, ultra low freezers, HVAC, solvent distribution and recovery system, compressed air, purified water, and waste water system * Ability to learn the automation system trouble shooting including a programed recipe fixing, changing and testing. * Support production on CAPEX projects for production facility and equipment improvements in order to increase production efficiency and reduce cost * Perform activities associated with the design and qualification of the new and existing USP/DSP equipment used in a manufacturing plant * Support large-scale production process development and optimization projects * Provide technical guidance and support investigations for process related deviations, change control and operational excellence projects * Oversee implementation, commissioning, and qualification of USP/DSP facility and process equipment * Maximize the success rate for production operations by instituting programs to minimize human error, mechanical failure, contaminations, and procedural error * Maintain a safety first approach in the large-scale manufacturing workplace * Communicate operational status regularly to senior management and corporate management, as require and appropriate. Communications include written documents and formal / informal oral presentations * Maintain a high level of compliance and efficiency to drive the organization to world-class manufacturing standards * Create new process and equipment drawings to existing processes based on specifications and standards * Update and maintain drawings and P&ID to reflect changes to existing processes * Responsible for trouble shooting and providing corrective action directives * Troubleshoot process equipment and ensuring that equipment works to its specifications and appropriate capacities * Create, execute validation protocols and write validation summary reports * Draft of new procedures, SOP's and protocols as well as training of staff for these expectations * Write technical reports to support the process development data. * Write standard operations procedures, standard test procedures, master batch records, and other related GMP documents. Qualifications * Bachelor's Degree BS degree in Mechanical, Electrical, Chemical, Manufacturing Engineering * Master's Degree MS degree in Mechanical, Electrical, Chemical, Manufacturing Engineering (Preferred) * Minimum 5 years of experience of pharmaceutical engineering and/or manufacturing * Thorough understanding of engineering fundamentals * Deep knowledge of cGMP, pharmaceutical manufacturing facility, large-scale equipment, and engineering principles * Good understanding of computer programming and software development * Ability to troubleshoot equipment problems and perform complex system tests. * Technical knowledge of USP/DSP processes / equipment / automation / utilities (e.g. large-scale chemical reactor, cleavage vessel, deprotection vessel, solvent delivery system, agitator, batches processing, tank, filtration, purified water system, hear exchanger, HVAC, etc.) * Equipment Qualification and Validation IQ /OQ / PQ and SOPs * Excellent written and oral communication skills * Ability to communicate in a proactive and solutions-focused manner, including keeping management aware of potential issues * Ability to work independently and manage one's time * Ability to schedule and host internal/external meetings and negotiate with vendors, contractors, and customers for the best interest of the production department. Excellent computer knowledge, including Microsoft Word and Excel * Communicate effectively and ability to function well in a team environment * Ability to effectively organize, multitask, and work in a fast-paced, deadline driven work environment * Detail oriented with the ability to troubleshoot and resolve equipment and process problems and deviations * Strong analytical and problem-solving skills. * Proficient in reading schematics and diagrams as well as other written materials * High level of safety awareness. * Good background for Automation systems software, i.e. DeltaV and FactoryTalk, is preferred. * Creative thinking skills with detail orientation. * Excellent manual dexterity. Base Annual Salary Range: $83,089 to $114,247 Our people are passionate about what they do, the product they sell, and the customers they serve. If you're looking for an opportunity to be a part of a work family that values collaboration, innovation and dedication, we're the right company for you. Placement of new hires in these wage ranges is based on several factors including education, skill sets, experience, and training. Total Rewards We offer all Team Members a total rewards package including competitive pay, annual performance bonus, a generous benefit package with comprehensive Medical/Dental/Vision coverage, 401(k) plan with employer contribution, and paid vacation, personal and sick days. Corporate Social Responsibility Bachem takes responsibility for future generations by a careful handling of resources and avoiding environmental risks. We continually improve our ecological performance and develop and implement new approaches for enhancing employees' environmental awareness. EcoVadis has awarded Bachem Gold Medal status in their assessment of Bachem. Bachem Americas is an Equal Opportunity Employer As an equal opportunity employer, we celebrate the diversity of our team and are committed to building an inclusive workplace where individuals are hired and advanced based on merit, skills, and qualifications. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or other legally protected status.

Kennedy Jenks is seeking a Drinking Water Process Engineer to join our team in California and contribute to projects focused on drinking water treatment, water reuse, and advanced water purification. This role offers the opportunity to work on both local and national projects, applying your technical expertise to complex water treatment challenges. Candidates at all stages of their career who are ready to take on increasing technical responsibility, contribute to innovative solutions, and collaborate with experienced engineers are encouraged to apply. Key Responsibilities Contribute technical expertise in municipal drinking water treatment, water reuse, and advanced water purification, including evaluating treatment processes, selecting appropriate methods, conducting engineering studies, and optimizing operations. Support project teams and client service managers in project pursuits, meetings, and technical discussions. Participate in feasibility studies, facility planning, and pilot testing for water treatment projects. Prepare technical deliverables, including basis of design reports, preliminary and detailed engineering drawings, specifications, process flow diagrams, and process instrumentation diagrams. Evaluate and optimize operations of existing water treatment facilities. Provide guidance and mentorship to less experienced engineers when appropriate, and collaborate with senior engineers on technical solutions. Stay current on industry standards, emerging technologies, and regulatory requirements. Qualifications BS or MS in Civil, Environmental, Chemical Engineering, or related discipline 5+ years of experience in drinking water treatment engineering, including process design, system optimization, or operational evaluation Engineer-in-Training (EIT) or Professional Engineer (PE) license; PE preferred or ability to obtain Strong technical, analytical, and problem-solving skills Ability to work collaboratively on multidisciplinary teams and communicate effectively with clients and project staff Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Salary range for this position is expected to be between $120,000 and $210,000, and may vary based upon education, experience, qualifications, licensure/certifications, and geographic location. This position is eligible for performance and incentive compensation. Benefits Summary: Kennedy Jenks offers a comprehensive benefits package, including medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs. #LI-hybrid

Dennis Group's Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process Engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to: Responsibilities Develop process design basis and select unit operations Develop operation specifications Coordinate with other project disciplines (engineers, designers, architects, etc.) Prepare process flow and piping and instrumentation diagrams Create process flow diagrams Prepare mass and energy balances Size and specify process and process utility equipment Equipment procurement and bid evaluation Assist project management with the development of project scope, budget and schedule for all process related work Help to coordinate the schedules and work of contractors for process equipment installation Work with clients, vendors, and suppliers to develop cost estimates and proposals Provide client assumptions on supply recommendations Develop process and instrumentation drawings (P&IDs) Oversee process and utility equipment installations Provide onsite construction start-up and commissioning support Research process engineering best practices Supporting talent growth within our organization Required Education Skills and Experience Bachelor's degree in Chemical or Process Engineering. 0-3 years of work experience or schooling developing process designs 0-3 years of work experience or schooling preparing process flow diagrams and P&IDs 0-3 years of work experience or schooling sizing and specifying process and process utility equipment. 0-3 years of work experience or schooling developing project scopes, budgets and process-related work schedules Co-op, intern or work experience with professional services, process engineering, and food and beverage firms is a plus Interest in food safety and sanitary design principles and a desire learn about various food and beverage industry standards, practices, and regulations Proficiency with MS Office, MS Project, and AutoCAD Excellent oral and written communication skills with proven client interaction and experience Must meet Travel Requirement - On-site construction project coordination and management with travel requirements between 30-50% of the year Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift-up to 15 pounds at times. Travel Requirement Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002531