Remington & Vernick Engineers jobs in Cherry Hill, NJ

The Water/ Wastewater Project Engineer/ Manager is a professional with a minimum of 8 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm's representative to clients, and providing support to branch offices in NJ/PA/DE/MD area. PRIMARY DUTIES: Hydraulic calculations and layout of structures. Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements. Engineering support to our inspection department. Act as firm's representative to Townships; utility authorities; and private utility companies. Draft concise proposals for new work. Capable of addressing multiple simultaneous assignments, on-time and within budgets. "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution. Producing all deliverables associated with this position. Capable of addressing multiple simultaneous assignments, on-time and within budgets. Regulatory permitting. Assist with energy audits. KNOWLEDGE, SKILLS and ABILITIES: Knowledge of water/wastewater equipment and their purpose. Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks. Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications. Provides effort and takes pride in all work assignments produced. Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables. Ability to simultaneously work on group and individual assignments. Capable of providing directions and mentoring less experienced staff. Capable of managing project meeting attended by either staff, clients or contractor's personnel. Familiarity with NJDEP regulations and compliance requirements. Must have effective communication, management and writing skills. Must be skilled in the use of Word/Excel products. AutoCAD capability a plus. EDUCATION/EXPERIENCE: Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED NJPE License Required or Ability to Acquire NJPE Reciprocity Essential Professional Licensure Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. Occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800 . This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary . #LI-KS1

Established forward-thinking full-service engineering consulting firm with offices in NJ, PA, DE, and more (headquartered in Cherry Hill, NJ) is seeking a highly skilled and experienced Municipal Discipline Leader to join our team. The Municipal Regional Manager will be responsible for overseeing Municipal operations across multiple offices managing relationships for both internal and external stakeholders and customers. This role requires strong leadership, strategic planning, and operational management skills to ensure the successful execution and delivery of Municipal services. We need a dynamic leader who can foster excellence, innovation, and efficiency by synergizing our current and future Municipal locations. Key Responsibilities: Regional Leadership: Provide strategic direction and leadership for Municipal operations within the region, ensuring alignment with the company's goals and objectives. Mergers and Acquisitions: Support growth initiatives by identifying and assessing opportunities for expanding Municipal. Integrate and optimize operations. Team Management: Lead and manage multiple office locations including a team of over 80 Municipal professionals, fostering a collaborative and high-performance culture. Encourage the development of matrix management and Municipal staff growth at other office locations. Subject Matter Expertise: Extensive knowledge of a variety of infrastructure projects (owned by local government and school districts). Understand construction plan documentation including architectural, structural, and transportation systems Operational Efficiency: Implement and maintain efficient processes and systems to improve and optimize Municipal project delivery and operational performance. Stakeholder and Client Engagement: Build and maintain strong relationships with external stakeholders, including clients, vendors, and partners, understanding their needs, addressing concerns, and ensuring satisfaction with Municipal services. Pursue new client and project opportunities and leverage expertise for assignments. Budget Management: Develop and manage regional budgets, ensuring financial targets are met and resources are allocated effectively. Quality Control: Ensure all Municipal work adheres to industry standards, regulations, and company policies, implementing quality control measures where necessary. Reporting: Provide regular updates and reports on regional Municipal activities, performance metrics, and project status to senior management. Innovation: Drive continuous improvement and innovation within the Municipal discipline, staying abreast of industry trends and best practices. KNOWLEDGE, SKILLS and ABILITIES: Exceptional leadership and team management skills, with the ability to inspire and motivate others. Proven experience in growth strategies, marketing, and client management within an engineering or technical environment. Strong understanding of regional building codes, standards, and regulations. Excellent project management skills, with a track record of successfully managing complex engineering programs. Exceptional communication and interpersonal skills, with the ability to build and maintain relationships with diverse stakeholders. Strong presentation skills. Strong analytical and problem-solving abilities. Ability to analyze financial reports and set business objectives Proficiency in engineering design software and project management tools. Knowledge of Deltek Vision software preferred. Willingness to travel within the region as required. Education/Experience Bachelor's degree in Civil Engineering (or related field). A Master's degree is a plus. At least 15 years of experience in Municipal design, engineering, and project management, with at least 10 years in a leadership role. CERTIFICATIONS/LICENSES REQUIRED PE License Required Valid Driver's License PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $147,000 - $242,550. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

If you are looking for a dynamic, fast-growth company with big ideas, you have come to the right place! GTA is looking for Geotechnical Field Technicians in our Philadelphia, PA office. Responsibilities include construction monitoring and testing of soil, concrete, and other materials. This is an EXCELLENT opportunity for a new graduate with interests in geology looking to start their career with a stable, growing company. Ample opportunities for training, certifications and career advancement. You must own a vehicle, have a good driving record, like working with people, and enjoy working outdoors. Experience is preferred, but we will accept entry level candidates and provide training! Office Address: 1117 Ivy Hill Road Philadelphia, PA 19150 Successful candidates MUST have: High School Diploma or Equivalent B.S. in Geology, but not required Certificates such as NICET, ACI, WACEL, PDOT a plus Own a Reliable Vehicle and have a Good Driving Record Enjoy working outdoors Ability to work alone as well as in a group This position may require standing for extended durations as well as repetitive motions such as lifting or hammering. The employee must have the ability to use their hands to handle, finger or feel; reach, climb or balance; crouch, stoop, crawl, kneel and sit, see and smell; including close, distance and peripheral vision, depth vision and ability to focus. The employee will regularly lift and/or move 60 pounds; and occasionally move 80 pounds or more (such as a loaded wheelbarrow of concrete or soil samples). GTA will provide you with Personal Protective Equipment, which includes High Visibility Vest, Hard Hat, Gloves, and Safety Glasses. OUR OUTSTANDING BENEFITS Competitive Compensation and Annual Performance Reviews Expense Reimbursement 401(k) with company match Medical, Dental and Vision coverage options Company provided Life and Disability coverage Optional additional Life and Disability coverage Pre-tax Health Savings Account, Medical Flexible Spending Account and Dependent Care Spending Account options Paid Time Off & Paid Holidays Employee Referral Program Educational Assistance Program Training and Development Opportunities YOUR FUTURE AT GTA AWAITS!! Our greatest asset is our people. This includes people like you! We are actively seeking motivated individuals to work on a wide range of exciting and challenging projects. Apply today and join the GTA family! We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof. #LI-Onsite #breezy GTA

Remington & Vernick Engineers is looking for a NICET IV/Resident Engineer Certified Professional with expertise of managing heavy highway / bridge construction projects, and a construction inspection team. This professional will be responsible for the project record keeping, correspondence, compiling, reviewing, and delivery of required daily inspection reports. The ideal candidate will chair various project meetings, record and prepare and distribute accurate meeting minutes. This individual will need to be well experienced in bridges, highways and have an extensive background in construction especially with clients such as NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: Act in the capacity of Resident Engineer, providing extensive inspection and management of construction project and serve as the Client's liaison with the Contractor. The RE shall be capable of managing a 3+ CM/CI staff, possess strong communication, computer, and writing skills and be experienced with CPM Scheduling Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects. Conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team. Work with client to inform public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public. Provide and maintain all records related to the project in question including daily quantities. Manage all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance. Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities. Review applications for payment with Contractor and make recommendations for progress payments to the Client. Prepare a final punch list at substantial completion and perform final project review for project closeout. Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: Good communication skills, with the ability to work with others and the public. Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: High School diploma or equivalent Bachelor's degree in civil engineering or construction management Minimum of 8 years of experience with 3+ years of experience on projects $10M or greater Experienced on bridge, and highway construction projects Must be familiar with NJDOT specifications and documentation practices. Possess a combination of NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED Valid Driver's License Licensed professional engineer or NICET 4 Highway Construction Inspection required ACI-Concrete Field Testing Technician NJSAT Asphalt Paving Construction Technologist Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has supervisory responsibility. The RE shall be capable of managing a 3+ CM/CI staff PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $94,000 - $122,200. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer. #LI-KS1

Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team. Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects. Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public. Provide and maintain all records related to the project in question including daily quantities. Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance. Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities. Review applications for payment with Contractor and make recommendations for progress payments to the Client. Prepare a final punch list at substantial completion and perform final project review for project closeout. Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: Good communication skills, with the ability to work with others and the public. Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: High School diploma or equivalent Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater Experienced on bridge, and highway construction projects Must be familiar with NJDOT specifications and documentation practices. Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED Valid Driver's License NICET 2+ Highway Construction Inspection or equivalent required ACI-Concrete Field Testing Technician NJSAT Asphalt Paving Construction Technologist Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Stantec's Buildings team is on a mission to become the world's leading integrated design practice. Our architects, engineers, interior designers, consultants, sustainability specialists, and technologists are passionate about the power of design. Our collaborative culture and our innovative, sustainable approach to projects help us create buildings that matter to our world. Together, we are enhancing the quality of life globally through design. Join us and design your place with Stantec. Your Opportunity The Project Controls Coordinator plays a pivotal role in supporting the project team by facilitating project setup, managing resources and overseeing document control processes. This position is instrumental in driving project execution while upholding the highest standards of quality and operational efficiency. Your Key Responsibilities - Collaborate closely with the Project Controls Professional Team on all aspects of the project. - Actively participate in the development of contracts, subconsultant documents, internal work orders and certificates of insurance. - Assist Project Managers with HSSE (Health Safety Security and Environmental) Compliance. - Support Project Mangers with submittals and RFIs. - Generate reports as needed to support project progress and decision-making. - Resource Project Management data entry and reporting Your Capabilities and Credentials - Self-motivated individual with a strong work ethic, capable of prioritizing and communicating to multiple groups. - Work well with others to achieve team results. - Must thrive working assertively in a deadline-driven environment. - Must be proactive. - Excellent written and verbal communications. - Ability to multi-task, manage time, organize, and set priorities and make timely decisions. - Possess strong problem solving and analytical skills, including attention to detail. - Positive attitude, with the ability to develop and maintain effective working relationships. - Must be proficient in MS Office skills. - Prior work in project controls / project assistant role is a plus. - Architecture/Engineering/Construction industry experience preferred. Education and Experience - Two-year business or related degree preferred with minimum of 1-year appropriate course work in project management, accounting, finance, or business preferred. - Experience performing financial analysis, cost management, scheduling and other project controls functions over the life of a project is desired. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. **Pay Range:** - Locations in WA, DC & Various CA, MA areas - Min Salary $ 67,500.00 - Max Salary $ 94,500.00 **Primary Location:** United States | PA | Philadelphia **Organization:** 1779 Buildings-US Mid Atlantic-Philadelphia PA **Employee Status:** Regular **Travel:** No **Schedule:** Full time **Job Posting:** 24/10/2025 06:10:33 **Req ID:** 1002770 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

The Engineering Technician is an entry-level professional with 1-2 years of experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Regional Manager, or Project Manager PRIMARY DUTIES: Design and prepare plans for site development, roadway, utility, stormwater, and other civil infrastructure projects Perform site grading, drainage, and erosion control design in compliance with local, state, and federal regulations Conduct technical analyses, calculations, and cost estimates Prepare and submit permit applications and coordinate with regulatory agencies Collaborate with project managers, architects, surveyors, and other engineers to ensure project objectives and deadlines are met Review construction plans and specifications for accuracy and adherence to project goals Provide support during construction, including responding to RFIs, submittal reviews, and field inspections Ensure compliance with applicable codes, standards, and best practices KNOWLEDGE, SKILLS and ABILITIES: Strong oral and written communication skills Ability to make public presentations Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients. Strong organizational skills and attention to detail Knowledge of computer aided design software, AutoCAD, InRoads and Excel Ability to work in groups as well as individually Knowledge of StormCAD, ArcGIS, AutoCAD Specification, preparation & research required EDUCATION/EXPERIENCE: Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED EIT preferred not required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. While this is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $57,000 - $85,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. #LI-KS1

An opportunity exists for highly motivated, personable, and organized Environmental Scientist/Geologist looking to advance their career as part of our growing Team of Environmental Permitting and Assessment Professionals in Pennsylvania. The successful candidate will have regulatory and project management experience in Pennsylvania and New Jersey to provide strategic management and support to our clients in all regions of the state, collaborate with our multi-disciplinary staff on a variety of projects, and actively pursue new opportunities to grow the team. In addition to regularly interacting with clients and regulators and managing and executing regulatory permitting and compliance tasks, daily work will also include developing proposals, mentoring staff, and driving our quality and health and safety program. You will perform environmental assessment and remediation tasks to support environmental investigation and remediation projects at sites with contamination by materials such as solvents, petroleum fuels, metals, and PCBs. You can join a dynamic team working on large, technically engaging, and impactful projects located at active and inactive petroleum refining and storage facilities and other industrial facilities. Your Key Responsibilities - Organize and manage a variety of environmental investigation and remediation tasks such as ground water monitoring, soil boring/well installations, operation and maintenance, and other activities. - Responsibilities will include a mix of office and field-based tasks and will include project execution, budgeting, scheduling, contracting, personnel supervision, compliance monitoring, data analysis/reduction, and technical reporting. - Reporting and data reduction tasks may include preparation of site maps, soil boring logs, well construction diagrams, geologic cross sections, potentiometric surface maps, and possibly groundwater flow models. - Field-based tasks will include coordination, supervision and execution of work that includes, but is not limited to, collecting soil, sediment, water and air samples; overseeing drilling of soil borings and installation of monitoring wells; performing hydraulic conductivity tests; excavation monitoring; use of instrumentation; overseeing subcontractors; and coordinating complex field tasks with multiple staff and subcontractors. The work may be associated with former manufactured gas plant (MGP) facilities, current/former refineries and petroleum processing/storage facilities, gas stations, as well as other commercial and industrial facilities in urban, rural, or undeveloped locations. - Conduct Phase I Environmental Assessments and Preliminary Assessments. - Complete applicable company and client-required health & safety training (including OSHA-required training) and follow health & safety policies and procedures. - Follow established standards, policies, procedures, and guidelines to complete assignments. - This position is within a larger environmental services team and will likely require providing support to multiple Stantec offices. - Travel may be required. Work hours may be irregular and include overnight and weekend work shifts. Your Capabilities and Credentials - Be willing to learn new skills for conducting field work, to work independently outdoors for long hours in potentially inclement weather conditions and be flexible in undertaking work assignments. - Have excellent verbal communication and technical writing skills. - Be conscientious, detail-oriented, and disciplined. - Build and maintain productive professional and personal networking relationships within your technical team. - Manage multiple project responsibilities simultaneously and track priorities. - Be proud to take ownership of work, exhibit a problem-solving mindset, and approach tasks with curiosity. - Be proficient in commonly used software (e.g. Word, Excel, etc.). Experience using gINT, MODFLOW, AQTESOLV, ArcGIS, and/or AutoCAD is a plus. - Pre-employment physical is required. - Good driving record and valid driver's license are required. Education and Experience - Bachelor of Science degree in Geology, Environmental Science, or related field. - 10+ years of progressively more responsible environmental assessment and remediation work experience. - Experience in active industrial settings is a plus. - 40-hour HAZWOPER (OSHA Hazardous Worker) certification and current 8-hour refresher certification are desired - Geologist in Training (GIT) or Professional Geologist (PG) certification is preferred. Other Considerations - Transportation Worker Identify Credential (TWIC Card) is required for access to jobsites and candidates must meet Federal TSA background check criteria and be able to obtain a TWIC Card. - The position will involve outdoor work and the work will include exposure to the elements including inclement weather. - Workdays may exceed 8 hours and 40+ hours per week - Field work may require use of a respirator and protective clothing depending on job-site conditions. - Ability to lift and move items and equipment throughout the workday weighing up to 50 lbs. - Ability to stand for long periods of time and traverse uneven surfaces in rough terrain. - Ability to bend, twist, stoop, and kneel throughout the workday. - Ability to climb up and down a ladder. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. #StayInquisitive **Pay Transparency:** In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. **Benefits Summary:** Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements **Primary Location:** United States | PA | West Chester **Organization:** 1956 EnvSvcs-US East Northeast-West Chester PA **Employee Status:** Regular **Travel:** Yes **Schedule:** Full time **Job Posting:** 30/10/2025 08:10:06 **Req ID:** 1002843 \#additional Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

The Ideal candidate will possess a minimum 3 years of experience utilizing AutoCAD Civil 3D to prepare/revise AutoCAD design drawings for municipal, commercial, and industrial facilities. A thorough understanding of AutoCAD Civil 3D applications is required. Experience drawing site plans, survey plots, deed/filed map protractions, municipal map layers, etc. is recommended. Experience with Esri ArcGIS application (i.e. ArcGIS Desktop, ArcGIS Pro) is a plus. The candidate will possess strong written and verbal communication skills that will enable them to communicate with engineering design, survey and cartography staff as well as generate the proper Drawing notations. PRIMARY DUTIES: Develop 2D and 3D AutoCAD Civil 3D 2018 or newer civil and site documentation. Work with managers and design staff to generate plans; section and details based on design discussions. Manage drawing sets. Assist with development of as-built drawings by performing field measurements. Work includes updates and corrections to drawings of municipal map layers (i.e. tax maps, zoning maps, ROSI maps, etc.) KNOWLEDGE, SKILLS and ABILITIES: Experienced in Auto Cad Civil 3D 2018 or newer. Knowledge of Esri, ArcGIS Pro is a plus. Working knowledge of Microsoft Excel and Word. Capable of multitasking. Work independently or as part of a team and take direction well. Open to learning/trained in new disciplines/skillsets EDUCATION/EXPERIENCE: High School diploma or equivalent. Two year technical or associates degree in Computer Aided Drafting/Construction Technology. CERTIFICATIONS/LICENSES REQUIRED N/A PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $51,000 - $76,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Stantec's Buildings team is on a mission to become the world's leading integrated design practice. Our architects, engineers, interior designers, consultants, sustainability specialists, and technologists are passionate about the power of design. Our collaborative culture and our innovative, sustainable approach to projects help us create buildings that matter to our world. Together, we are enhancing the quality of life globally through design. Join us and design your place with Stantec. Your Opportunity Our commissioning group focuses on three essential key points for every project from the first day we become part of the project team. Communication, documentation, and verification. These points are integral to all quality assurance applications. The data center industry is continually evolving, and this is an ideal opportunity for candidates who enjoy working on technically challenging projects that require cutting edge designs. Aside from the preferred locations listed, this position is open to any location with a Stantec office presence, for the right candidate. Your Key Responsibilities - Participate in all phases of commissioning projects which may include a variety of complex features, including planning, scheduling, and coordination of work. - Perform engineering design reviews, prepare commissioning test procedures and reports, direct client-site testing and manage the training of on-site staff. - Prepare equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation. - Prepare commissioning test procedures and reports - Develop and maintain commissioning logs, equipment checklists, and other tools to track commissioning projects. - Prepare comprehensive reports; recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals. - Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning. - Participate in commissioning activity meetings. - Interface with construction contractors, vendors, and testing technicians. - Conduct tests and compile all testing procedure results. - Integrated system testing - Develop and administer functional tests for various building Mechanical systems, such as HVAC air and water distribution systems, air handling units, pumps, cooling towers, chillers, boilers, etc. - Planning, directing, and monitoring all aspects of commissioning services for both new and existing buildings. Your Capabilities and Credentials - Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction). - High competency in technical writing, systems development and utilization. - Experience using Microsoft Word, Excel, AutoCAD. - Knowledge of MEP systems and controls design, installation, and operation a plus. - Strong presentation and communication skills with the ability to present complex technical information to a wide audience, including contractors, architects, engineers, and others with varying degrees of technical knowledge. - This position will require domestic and/or international travel up to 75% of the time, - Proven track record of performing commissioning planning, functional testing, building performance investigation including re-commissioning, retro-commissioning and/or preventative maintenance, and building system troubleshooting experience for new and existing buildings. - Possess a valid driver's license with a good driving record. Education and Experience - Bachelor's Degree in Mechanical Engineering, or accredited college or university a plus - Minimum of 2 years experience in an engineering service delivery organization/and or consulting /design environment with proven work-related experience in MEP systems - Data Center / Mission Critical Experience preferred - Previous experience working on a mission-critical facility construction site is a plus - EIT a plus - LEED AP accreditation is a plus - CXA, AABC, ACG certification a plus. This description is not a comprehensive listing of activities, duties, or responsibilities that may be required of the employee and other duties, responsibilities, and activities may be assigned or may be changed at any time with or without notice. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. **Pay Range:** - Locations in CO, HI, MD & Various CA, NJ Areas - Min Salary $ 82,600.00 - Max Salary $ 119,800.00 - Locations in WA, DC & Various CA areas - Min Salary $ 88,600.00 - Max Salary $ 128,500.00 **Pay Transparency:** In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. **Benefits Summary:** Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements **Primary Location:** United States | OR | Portland **Organization:** BC-2804 Buildings-US West BSS **Employee Status:** Regular **Travel:** Yes **Schedule:** Full time **Job Posting:** 17/06/2025 10:06:35 **Req ID:** REQ250001FV \#additional Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

Ideal candidate will possess a minimum 3 years of experience preparing AutoCAD design drawings in Auto Cad as well as REVIT models for municipal, commercial, and industrial facilities. A thorough understanding of Auto Cad and REVIT is required. Experience drawing building layouts, floor plans, foundation plans, framing plans, wall sections and details. Experience with creating REVIT libraries, using BIM360 and coordinating drawings between multiple disciplines is a plus. The candidate will possess strong written and verbal communication skills that will enable them to communicate with engineering design staff as well as generate the proper Drawing notations. PRIMARY DUTIES: Develop 2D Auto Cad drawings and 3D REVIT Models for building construction documentation. Work with manager and design staff to generate plans; section and details based on design discussions. Manage drawing sets. Assist with development of as-built drawings by performing field measurements. Work includes updates and corrections to drawings of structural, water, wastewater, electrical and plumbing systems. KNOWLEDGE, SKILLS and ABILITIES: Experienced in Auto Cad. Experienced in REVIT Working knowledge of Microsoft Excel and Word. Capable of multitasking. EDUCATION/EXPERIENCE: High School diploma or equivalent. Two year technical or associates degree in Computer Aided Drafting/Construction Technology (preferred) CERTIFICATIONS/LICENSES REQUIRED N/A PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $51,000 - $76,500 . This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary .

The ideal candidate will possess a minimum of 3 years of experience utilizing AutoCAD Civil 3D to prepare and revise design drawings for municipal, commercial, industrial, and water/wastewater facilities. A thorough understanding of AutoCAD Civil 3D applications is required. Experience preparing site plans, survey plots, deed/filed map protractions, municipal map layers, and related drawings is recommended. The candidate will also possess strong written and verbal communication skills that will enable them to collaborate effectively with engineering design, survey, and cartography staff, as well as generate accurate and clear drawing notations. PRIMARY DUTIES: Develop 2D and 3D AutoCAD Civil 3D 2018 or newer civil and site documentation. Experience preparing water and wastewater design drawings such as piping layouts, utility profiles, grading plans, pump station layouts, process piping, and treatment plant site plans is highly desirable. Work with manager and design staff to generate plans; section and details based on design discussions. Manage drawing sets. Assist with development of as-built drawings by performing field measurements. KNOWLEDGE, SKILLS and ABILITIES: Experienced in Auto Cad Civil 3D 2018 or newer. Working knowledge of Microsoft Excel and Word. Capable of multitasking. Work independently or as part of a team and take direction well. Open to learning/trained in new disciplines/skillsets Knowledge of Esri, ArcGIS Pro is a plus. EDUCATION/EXPERIENCE: High School diploma or equivalent. Two year technical or associates degree in Computer Aided Drafting/Construction Technology. CERTIFICATIONS/LICENSES REQUIRED N/A PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $51,000 - $76,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

We are looking for a competent Accounting & Billing Specialist to undertake a variety of financial and non-financial tasks to help guarantee the company's revenue. This individual will play a key role in preparing client invoices, maintaining project billing information, and supporting the accounting team with reporting and analysis. PRIMARY DUTIES: Process large volume of monthly client invoices and supporting documentation Prepare detailed invoice packages utilizing client specific formats View and approve project plans Create chargeable project numbers Maintain project billing terms information Resolve discrepancies on invoices Accounts receivable monitoring and follow-up Assist Senior Accountant with journal entries and other accounting functions Review monthly posting registers to account for all time postings Supporting project manager information and analysis requests Offer project plan training assistance to technical staff Review RFP's, Contracts and client requirements for invoicing Ability to complete work on schedule with extreme accuracy and detail Display high degree of self-motivation and independent decision making with exemplary follow up skills KNOWLEDGE, SKILLS and ABILITIES: Display ability to work with minimal supervision and manage multiple projects and priorities Display capability and attitude to work with team members to implement solutions to meet client requirements Solid organizational skills with ability to prioritize tasks and manage time Excellent interpersonal skills Strong analytical skills Ability to work in a fast-pace environment Capacity to plan, organize and adapt Excellent communication skills (written and verbal) Has previously worked in an Accounting or Finance Department Possess understanding and functional knowledge of business Proficient systems knowledge: Microsoft Office and Outlook Working knowledge of PC platform Working knowledge of Excel, Word, PDF Reader Internal Software knowledge a plus: Deltek Vantagepoint Accounting & Project Management Software EDUCATION/EXPERIENCE: Bachelor's degree in Accounting, Finance, or Business Administration CERTIFICATIONS/LICENSES REQUIRED N/A PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we're expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other - and we have fun collaborating, sharing experience and expertise, and learning along the way. We're passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact The Infrastructure Project Manager plays a critical role in leading and delivering complex projects that support essential infrastructure systems. This role is ideal for SkillBridge candidates with military experience in engineering, project management, or related technical fields, offering a hands-on opportunity to transition skills into a civilian career with Larson Design Group. As Project Manager, you will oversee project planning, scheduling, budget management, resource allocation, and forecasting to ensure each project's successful execution and financial performance. You'll work closely with clients, providing consistent communication and proactive coordination to meet project objectives and maintain high levels of client satisfaction. The role includes an annual revenue target of $500K, emphasizing a strong focus on financial stewardship and growth. Key Responsibilities Project Management: Oversee the entire project lifecycle, from planning and initiation through execution and closeout, ensuring projects meet quality, schedule, and budget requirements. Client & Program Management: Establish and maintain strong relationships with clients, manage client expectations, and seek opportunities to expand the client relationship. Financial Management: Develop budgets, track expenditures, and manage invoicing to meet revenue and profitability goals. Leadership & Oversight: Provide technical and strategic guidance to project teams, contribute to staff development, and support a collaborative work environment. This role offers SkillBridge candidates valuable leadership experience and career development in infrastructure-focused project management, particularly in federal, defense, and municipal sectors. Education and Experience Education: Bachelor's or Master's Degree in a related field of study. Experience: Minimum of five (5) years' job-related experience Licensure/Certification: Project Management Professional (PMP), or any other relevant licensure (strongly preferred). EEO Statement Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization.

CIVIL PROJECT ENGINEER: We are currently looking for the right team member with 6+ plus years of experience in civil engineering for our Municipal Engineering Department. This challenging position is structured to offer the successful candidate ongoing learning and career advancement. Team members work on projects that have a direct impact in local communities and provide a variety of municipal engineering and planning services affecting local infrastructure and land use. We work in urban, suburban and rural locations and collaborate with each client to understand their goal and vision. If you're looking for rewarding work on a variety of projects, read on to learn how you can bring your expertise to a firm that combines state-of-the-art technology with a history of success. POSITION SUMMARY: This individual will design and/or manage a variety of infrastructure projects (owned by municipalities and local school districts) and will report directly to the Sr. Associate / Municipal Service Department Head. Such projects shall include roads, underground utilities, public buildings, recreational facilities, and land use applications submitted by private developers. PRIMARY DUTIES: Responsible for acting as the project manager to one or more municipalities or other public agencies. The project manager will act as the single point of contact between the firm and the project. They will supervise and coordinate all projects performed in the firm on behalf of the client, to the client's satisfaction. Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure. Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools. Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications. Estimate quantities and cost of materials, equipment, or labor to determine project feasibility. Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data. Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact. Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations. Identify environmental risks and develop risk management strategies for projects. Attend regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects. Provide technical advice to clients regarding design, construction, or capital program modifications. Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: Ability to draft reports including illustrations, appendices, maps and other attachments to summarize research results. Excellent verbal and written communication skills. Excellent organizational skills and attention to detail. Strong analytical and problem-solving skills. Proficient with Stormwater Modeling Software, Microsoft Office Suite or related software. EDUCATION, EXPERIENCE & LICENSES REQUIREMENTS: Bachelor's degree in civil engineering, or related field from an accredited college or university. Professional License (P.E.) required Valid Driver's License and reliable transportation to field visits and client meetings as required. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee must be physically able to conduct field work and handle equipment; ability to traverse various terrain when working in the field; Work requires frequent and prolonged computer use; May require occasional lifting up to 15 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this summary job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties as necessary.

About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we're expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other - and we have fun collaborating, sharing experience and expertise, and learning along the way. We're passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact The Project Manager/Senior Project Manager is responsible for overall management of clients and projects including design, communications, personnel management, budgets, schedules, quality control, business development, and client communication & relationships. This position will assist in preparing and implementing annual business goals and multi-year strategic business plans for the Transportation Group. This position will also be responsible for overall personnel management of assigned team members. Key Responsibilities Plans and conducts work requiring judgment in independent evaluation, selection, and substantial adaptation & modification of standard techniques, procedures, and criteria. Manages clients/bridge and/or highway projects specific to local municipalities, PennDOT and more. The Project Manager manages services up to $1M in revenue, the Senior Project Manager manages services over $1M in revenue. Creates and tracks client proposals including writing scope, technical & price proposals, statements of interests, amendments, developing budgets & schedules, and identifying potential issues. Prepares workload forecasting reports. Ensures compliance with all environmental, survey, and other rules, regulations, and permitting requirements. Possesses knowledge of Codes and Standards applicable to design of projects. Prepares technical and price proposals, statements of interests, amendments, and schedules. Promotes, utilizes, and supports quality assurance and quality control processes to improve the quality of deliverables and reduce design errors & omissions. Prepares, reviews, and coordinates contract agreements for projects. Signs contract agreement within the allotted parameters provided. Identifies new markets, develops leads & opportunities, performs business development activities, and pursues new geographies. Coaches, mentors, and motivates project team members and sub-consultants. Directs, mentors, and guides team members and staff; provides annual performance evaluations and career development plans. Manages project risk in accordance with company policy. Education and Experience Education: Bachelor's or Master's Degree in Civil Engineering. Experience: Minimum of ten (10) years' job-related experience, a minimum of fifteen (15) years experience for Sr. Project Manager. PennDOT experience preferred. Licensure/Certification: Professional Engineer (PE) or other professional licensure in field of expertise strongly preferred. Preferred Qualifications Knowledge of MicroStation, Open Roads Designer, and Open Bridge Designer, is a plus. Must possess the ability to work both independently and as part of a Project Team, possess strong leadership & interpersonal skills, and strong time management skills. Must be able to interact professionally with clients, vendors, regulatory agencies, and other external sources in a professional manner. Must be proficient in public speaking, creating presentations, and delegation. EEO Statement Larson Design Group is an Affirmative Action/EEO employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran.

Stantec Buildings is on a mission to become the world's leading integrated design practice. Our architects, engineers, interior designers, sustainability specialists, and technologists are passionate about the power of design. We take an innovative, collaborative approach to projects, sharing a common belief that sustainable design for the built environment can make the world a better place for future generations. Join us and design your place with Stantec. Your Opportunity Morrison Hershfield's, now Stantec, Integrated Engineering Design (IED) group provides integrated engineering solutions to institutional, industrial, residential and commercial clients with a focus on transit, telecom, waste management, higher education and food/beverage facilities that require reliable and cost effective infrastructure for both new and retrofit solutions. The combined skills of our engineers, technicians and support personnel with their diverse backgrounds in design and construction provide clients with a team recognized as leaders in the field. Your Key Responsibilities - Participates in all phases of commissioning projects which may include a variety of complex features, including planning, scheduling, and coordination of work - Performs engineering design reviews, prepare commissioning scripts and reports, direct client-site testing and manage the training of on-site staff - Prepares equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); - Comprehensive Commissioning documentation - Prepares commissioning test procedures and reports - Develops and maintains commissioning logs, equipment checklists, and other tools to track commissioning projects - Prepares comprehensive reports; recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals - Reviews design criteria, specifications, drawings, equipment submittal, and other documentation pertinent to commissioning - Participates in commissioning activity meetings - Interfaces with construction contractors, vendors, and testing technicians - Conducts tests and compile all testing procedure results - Integrates system testing, load Bank Testing, compilation of all testing procedure results - Develops and administers functional tests for various building Electrical systems, such as: UPS, Generator, Switchgears Power Distribution Units Your Capabilities and Credentials - Data Center / Mission Critical Experience is an asset - Previous experience working on a mission critical facility construction site a plus - Licensed PE or EIT in Electrical Discipline a plus - LEED AP accreditation a plus - CXA, AABC, ACG certification desired - Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction) - High competency in technical writing, systems development and utilization - Experience using Microsoft Word, Excel, AutoCAD - Extensive knowledge of MEP systems and controls design, installation and operation a plus - This position will require domestic travel - Possess a valid driver's license with a good driving record Education and Experience Technical/Bachelor's Degree in Electrical Engineering, or accredited college or university a plus Minimum 2 years of consulting engineering experience This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. **Pay Range:** - Locations in CO, HI, IL, MD & Various CA, NJ Areas - Min Salary $ 60,900.00 - Max Salary $ 85,400.00 - Locations in WA, DC & Various CA areas - Min Salary $ 75,000.00 - Max Salary $ 108,800.00 **Pay Transparency:** In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. **Benefits Summary:** Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements **Primary Location:** United States | PA | Philadelphia **Organization:** 2808 Buildings-US Northeast BSS-Philadelphia PA **Employee Status:** Regular **Travel:** No **Schedule:** Full time **Job Posting:** 15/08/2025 02:08:08 **Req ID:** 1001911 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

Stantec's Buildings team is on a mission to become the world's leading integrated design practice. Our architects, engineers, interior designers, consultants, sustainability specialists, and technologists are passionate about the power of design. Our collaborative culture and our innovative, sustainable approach to projects help us create buildings that matter to our world. Together, we are enhancing the quality of life globally through design. Join us and design your place with Stantec. Your Opportunity Take the first step towards designing your career with Stantec. As a professional services firm we are seeking Fire Protection * EITs to join our growing North America Fire Protection Engineering Team. We are better together. Fire Protection Engineers (FPEs) protect lives and property. They plan and design engineering projects that prevent fires from occurring and minimize the impact of those fires that do occur. Fire protection systems detect, control and reduce fire and smoke in buildings and structures. FPEs recommend materials, equipment, and systems to assist in safeguarding life and property against fire, analyze how fire behaves and model how safety features perform in a fire. They assess the fire protection needs within projects and document those in design analysis or basis of design reports. They create design documents for fire protection systems, including drawings, using computer-aided design (CAD) or Building Information Modeling (BIM) software, and specifications that are used to direct the construction of buildings and systems in the field. FPEs perform construction progress inspections and acceptance tests / commissioning to ensure that installed systems comply with the construction documents and applicable codes and that they function as intended. A Fire Protection * EIT performs engineering work under close supervision requiring the application of standard techniques, procedures, and criteria to carry out a sequence of related fire protection engineering tasks such as the preparation of simple plans, designs, calculations, costs and bills of material in accordance with established codes, standards and drawings. The role applies professional concepts and expands upon learning while performing various phases of engineering work receiving detailed instruction. Your Key Responsibilities * Apply general concepts of fire protection engineering through investigation and analysis to support engineering projects that may include design of fire suppression systems (sprinklers and standpipes, water supply, special hazard extinguishing systems), fire detection and alarm systems, and smoke control systems, selection of fire-resistant materials and assemblies, and development of egress strategies. * Perform basic calculations to analyze and design engineering system components using company standard software and proprietary manufacturer software. * Gather information to support design decisions. * Assist team in preparing engineering designs, drawings, specifications, presentations and reports. * Verify compliance with applicable codes and engineering standards and practices. * Work with other architecture and engineering design professionals in the coordination and delivery of projects under the direction of a senior engineer. * Assist the team in providing support services during construction, including submittal reviews, response to requests for information and contract document clarifications, construction progress inspections and acceptance testing. * Perform other duties as assigned by senior engineering staff. Your Capabilities and Credentials * Basic knowledge of interpretation and application of building and fire codes and NFPA standards. * Knowledge of active and passive fire protection systems, including fire suppression systems, fire detection and alarm systems, smoke control systems, fire resistive construction and egress systems. * Ability to participate and collaborate in project team setting with internal and external clients. * Strong technical writing, presentation and interpersonal skills. * Requires understanding of Microsoft Office Suite, Revit, AutoCAD. * Experience with Fire Dynamics Simulator, Contam, Pathfinder and other computer modeling software is a plus. Education and Experience Minimum of Bachelor of Science Degree in Fire Protection Engineering or other closely related engineering discipline with an emphasis in Fire Protection Engineering coursework. Zero to three years of related work experience or an equivalent combination of education and experience to successfully perform the essential duties of the job as those listed above. Engineer in Training (EIT) / Engineering Intern (EI) preferred, working towards obtaining Fire Protection Professional Engineer (P.E.) licensure. Typical office environment working with computers and remaining sedentary for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. Location Our Fire Protection Engineers are currently located in Stamford, Connecticut; Atlanta, Georgia; and Orlando, Florida. We are actively recruiting Fire Protection Engineers for multiple locations across the United States. Additional Information: ************************** US Office Locations: **************************/offices/office-finder#country=location0:north-america/us Pay Range: * Locations in VT, & Various CA, NY Areas - Min Salary $ 65,800.00 - Max Salary $ 92,100.00 * Locations in CO, HI, MD & Various CA, NJ Areas - Min Salary $ 72,400.00 - Max Salary $ 101,300.00 Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | CT | Stamford Organization: BC-2808 Buildings-US Northeast BSS Employee Status: Regular Travel: Yes Schedule: Full time Job Posting: 16/06/2025 04:06:51 Req ID: REQ250001SE \#additional Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

The Project Engineer is a professional with 10-15 years of experience. This individual will design and/or manage a variety of infrastructure projects (owned by municipalities and local school districts) and will report directly to the principal. Such projects shall include roads, underground utilities, public buildings, recreational facilities, and land use applications submitted by private developers. PRIMARY DUTIES: Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client's satisfaction. Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure. Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools. Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications. Estimate quantities and cost of materials, equipment, or labor to determine project feasibility. Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data. Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact. Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations. Identify environmental risks and develop risk management strategies for projects. Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects. Provide technical advice to clients regarding design, construction, or capital program modifications. Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: Municipal Engineering experience preferred but not required. Strong oral and written communication skills Ability to make public presentations. Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients. Strong organizational skills and attention to detail Knowledge of computer aided design software. Ability to work in groups as well as individually. EDUCATION/EXPERIENCE: Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800 . This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: Medical, dental, and vision insurance Short-term and long-term disability insurance Life insurance 401(k) retirement plan Paid holidays and paid time off (PTO) 12 weeks of paid parental leave for birthing parents Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program Wellness program Tuition reimbursement Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary .