Repair operator full time jobs - 53 jobs

The Operator III will operate machinery for construction, demolition, or excavation projects and other duties as assigned. Duties/Responsibilities: Follows Values, Vision and Mission Works with a team Operate equipment including excavators, dozers, rock trucks, skid steers, roller, and tractors with pan Prepares construction sites for building, demolition, or excavation Uses equipment to prepare building sites for construction Ensures loads are secured properly Grease and fuel equipment prior to beginning/end of shift Cleans equipment and performs daily inspections Performs routine maintenance and repairs Attends and participates in morning huddle Dig for mainline utility installation Finish grading of building pads and roadway with GPS instruments or stakes, with topo shots Helps keep crew on task and proper production Sets Safety example by following safety guidelines at all times and complies with proper safety procedures and PPE Performs other related duties as assigned/needed up to and including all laborer duties Required Skills/Abilities: Expert in all laborer duties Expert Ability to work independently Ability to listen, understand, and follow directions Ability to effectively communicate and problem solve Ability to remain flexible in job hours worked as specific assignments change Ability to perform basic math (addition, subtraction, multiplication, and division) Knowledge of utility installation and cut/fill operations Mechanical Skills Ability to read construction blueprints and calculate run, rise, percentage, GPS, as-builds, etc. Ability to read cut sheets, grade stakes and GPS station Proper instrument set up of GPS base with equipment, pipe laser, rotary laser, line/surface level, etc. Proper rigging practices Education and Experience: 8 to 10+ years of dirt/utility experience Expert knowledge of heavy equipment operation and capabilities Expert knowledge of construction Valid driver's license or State ID CPR and First Aid (Thompson will train if necessary) 10-hour OSHA certification (Thompson will train if necessary) Physical Requirements: Must have physical strength, balance, hand-eye coordination, and stamina necessary to complete jobs in various areas Must be able to lift and carry up to 25 pounds Must be able to operate machinery for prolonged periods of time Must be able to operate equipment in a variety of environments including but not limited to concrete, dirt, fumes, and loud noise levels Must be able to work long hours and Saturdays when needed Required Tools: High Vis shirt or Vest Utility knife Clothes with no large holes or cut offs for varying weather conditions Job Type: Full-time Salary: $22.00 - $35.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: 8 hour shift Day shift Monday to Friday Overtime Supplemental pay types: Bonus pay People with a criminal record are encouraged to apply Ability to commute/relocate: Columbus, OH: Reliably commute or planning to relocate before starting work (Required) Experience: Heavy equipment operation: 2 years (Required) Work Location: In person

Job Description Production Operator We are currently seeking an experienced Production Operator to join our team in Coshocton, Ohio. About the role: The Production Operator is responsible testing and reporting plant operations to ensure safety, quality, and productivity while supporting the Company's policies, goals and objectives. This position is scheduled in 12 hr. shifts. Weekends and holidays when scheduled. What you'll do: · Learn and operate all processes and equipment associated with the plant · Learn and operate DCS (computer control system) · Learn and follow procedures for plant start-up, shut down, cleaning and batching · Maintain accurate and efficient logs. · Analyze complied data and make adjustment(s) to optimize plant operation · Communicate effectively with all personal details of what has occurred and what is supposed to be done during the next shift including the instructions in the log book · Load out commodities · Become a certified operator of rail mover, forklift, wheel loader, man lift, and skid loader · Communicate inventory and quality control to Production Supervisor and others as needed · Perform quality control test on product streams · Notify shift supervisor of any issues or concerns regarding plant operations, etc · Maintain plant facilities by practicing effective housekeeping procedures · Complete any and all tasks assigned by supervisor · Maintain a team environment with all other employees and departments while providing a high level of customer service and a friendly atmosphere · Promote Three Rivers Energy, in the community Our Ideal Candidate: Education and Experience · Legal authorization to work in the U.S. on a full-time basis · Must have a valid driver's license · High school diploma or equivalent Skills and Abilities: · Ability to work independently and as a member of a team. · Able to read, write, and comprehend English · Driven and dependable with quality attendance habits · Individual must be able to add, subtract, multiply, and divide numbers. Individual must be able to work with fractions, metric system, percentages, and decimals. Physical Demand: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is frequently required to sit; talk or hear and taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include depth perception. The employee must regularly lift and/or move up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. What we offer: · Competitive salary range · SIMPLE IRA Retirement Savings Plan · Reimbursement for quality boots · Outside work environment · Comprehensive Health, Dental, LTD, and Life/AD&D Benefits · Maternity Leave · Predictable Full-Time Schedules · Paid Holidays · Paid Time-Off *EEO Employer

Production Operator We are currently seeking an experienced Production Operator to join our team in Coshocton, Ohio. About the role: The Production Operator is responsible testing and reporting plant operations to ensure safety, quality, and productivity while supporting the Company's policies, goals and objectives. This position is scheduled in 12 hr. shifts. Weekends and holidays when scheduled. What you'll do: · Learn and operate all processes and equipment associated with the plant · Learn and operate DCS (computer control system) · Learn and follow procedures for plant start-up, shut down, cleaning and batching · Maintain accurate and efficient logs. · Analyze complied data and make adjustment(s) to optimize plant operation · Communicate effectively with all personal details of what has occurred and what is supposed to be done during the next shift including the instructions in the log book · Load out commodities · Become a certified operator of rail mover, forklift, wheel loader, man lift, and skid loader · Communicate inventory and quality control to Production Supervisor and others as needed · Perform quality control test on product streams · Notify shift supervisor of any issues or concerns regarding plant operations, etc · Maintain plant facilities by practicing effective housekeeping procedures · Complete any and all tasks assigned by supervisor · Maintain a team environment with all other employees and departments while providing a high level of customer service and a friendly atmosphere · Promote Three Rivers Energy, in the community Our Ideal Candidate: Education and Experience · Legal authorization to work in the U.S. on a full-time basis · Must have a valid driver's license · High school diploma or equivalent Skills and Abilities: · Ability to work independently and as a member of a team. · Able to read, write, and comprehend English · Driven and dependable with quality attendance habits · Individual must be able to add, subtract, multiply, and divide numbers. Individual must be able to work with fractions, metric system, percentages, and decimals. Physical Demand: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is frequently required to sit; talk or hear and taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include depth perception. The employee must regularly lift and/or move up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. What we offer: · Competitive salary range · SIMPLE IRA Retirement Savings Plan · Reimbursement for quality boots · Outside work environment · Comprehensive Health, Dental, LTD, and Life/AD&D Benefits · Maternity Leave · Predictable Full-Time Schedules · Paid Holidays · Paid Time-Off *EEO Employer

Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* I LinkedIn I Glassdoor I Facebook I YouTube Role Overview: Possibility in Your Hands Join Amcor as a Thermoforming Operator and help produce high-quality finished goods safely and efficiently. You will operate thermoforming equipment, lead a small production team, and ensure adherence to safety, quality, and production standards. Your role directly impacts productivity, product quality, and operational excellence. Schedule Shift: 12-hour 2-2-3 night shift (6:55 p.m. - 7:10 a.m.) Compensation & Benefits: Value, Recognized We reward great work with: Pay: $21.49-$26.76/hour + $0.50/night shift premium Overtime: 1.5x pay for hours over 40 per week 401(k): Dollar-for-dollar match up to 8% Benefits: Comprehensive medical, dental, vision, pharmacy, disability, and life insurance coverage starting day one Tuition reimbursement and professional development opportunities Job Description: Possibility Unpacked What you'll do: Operate thermoforming machines to produce finished goods safely and cost-effectively Lead and coordinate assigned team members (Assistants and Packers) to achieve daily production goals Monitor and minimize downtime through efficient changeovers and best practices Conduct QA testing and inspections to ensure product meets specifications Maintain tool boards, machine boards, audits, and check sheets Provide scheduled breaks and lunches for the production team Coach and train production staff as needed Support plant operations and assist with tasks assigned by Supervisor or Team Leader Participate in Kaizen events and continuous improvement initiatives Follow all safety, quality, and food safety standards, and maintain a clean, organized work area What We Want From You: Lead the Pack Ability to operate thermoforming equipment effectively Strong communication and leadership skills Commitment to Amcor Core Values and fostering a positive, collaborative work environment Completion of Thermoforming Operator Job Training and Skills Assessment for certification Problem-solving mindset and ability to work independently Dedication to safety, quality, and operational excellence Flexibility to support other plant operations as needed Physical Requirements Ability to stand for 12.25-hour shifts Ability to work in hot and cold environments Push, pull, bend, twist, and lift up to 50 lbs. Why Amcor? Be part of a global leader while working in a supportive, team-driven environment. At Amcor, your contributions are recognized, your growth is encouraged, and your work makes a difference. 👉 Apply today and put possibility in your hands with Amcor. Our Expectations We expect our people to be guided by The Amcor Way and demonstrate our Values every day to enable the business to win. We are winning when: Our people are engaged and developing as part of a high-performing Amcor team Our customers grow and prosper from Amcor's quality, service, and innovation Our investors benefit from Amcor's consistent growth and superior returns The environment is better off because of Amcor's leadership and products Equal Opportunity Employer/Minorities/Females/Disabled/Veterans/Sexual Orientation/Gender Identity Amcor is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you would like more information about your EEO rights as an applicant under the law, please click on the "Know Your Rights: Workplace Discrimination is Illegal" Poster . If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call ************ and let us know the nature of your request and your contact information. E-Verify We verify the identity and employment authorization of individuals hired for employment in the United States. Benefits When you join Amcor, you will have access to a comprehensive benefits and compensation package that includes: Medical, dental and vision plans Flexible time off, starting at 80 hours paid time per year for full-time salaried employees Company-paid holidays starting at 9 days per year and may be slightly higher by location Wellbeing program & Employee Assistance Program Health Savings Account/Flexible Spending Account Life insurance, AD&D, short-term & long-term disability, and voluntary accident disability benefits are available Paid Parental Leave Retirement Savings Plan with company match Tuition Reimbursement (dependent upon approval) Discretionary annual bonus program (initial eligibility dependent upon hire date)

Hours: Full time, M-F, 35 hour week, regular work hours 7:30AM-4PM, must be available in the event of an emergency with occasional weekends, holidays and on-call with additional compensation Salary: $21.67 Performs necessary functions of the daily operations and maintenance of water distribution systems, sewer collection systems and water and wastewater treatment plants. Duties : Demonstrates regular and predictable attendance. Promotes and maintains positive and effective working relationships and promotes good public relationships as a representative of Licking County Government. Monitors water and/or wastewater treatment equipment in order to ensure proper operation; checks chemical supply levels and replenishes as necessary. Assists Maintenance Operator with repairs on treatment equipment (changes oil, greases motors, pumps, chains, etc.). Operates and maintains water distribution and wastewater systems (pumps, compressors, electrical controls, lines, valves etc.). Receives and responds to emergency situations related to treatment, collection, or distribution operations. Receives and responds to telephone inquiries or service calls. Inspects and logs consumer meter readings for billings and water consumption information. Performs preventative and service maintenance and repair on departmental vehicles. Collects water and/or wastewater samples for purpose of analysis. Completes general housekeeping tasks in order to maintain facilities (cleans, paints, maintains grounds, etc.). Meets all job safety requirements and all applicable OSHA safety standards that pertain to the essential functions of the position and all agency safety procedures Remains informed of current developments and procedures pertinent to duties; may be required to attend seminars/training Qualifications Minimum Qualifications: One year certificate from college or technical school; and one (1) to two (2) years related experience and/or training; or equivalent combination of education and experience. Class B Commercial Driver's License with tanker and air brakes.* Physical mobility, lifting, and exposure to hazardous conditions. *May be acquired after hire and obtained prior to the end of the probationary period. Additional Qualifications (Agency/Dept. Qualifications): Ohio EPA Class I Water and Class I Wastewater Certificates are preferred but not required. Knowledge of basic Water & Wastewater testing is also recommended but not required. Candidates must be able to relate to the public in a professional manner. Candidate should have general knowledge of plumbing, electrical and septic tank operation. Candidate should be a fast learner and be able to adapt to changing work demands. Additional Information Application Procedures: Submit completed application, resume and cover letter to the Licking County Human Resources Department, 20 South Second Street, 3rd Floor, Newark, Ohio 43055. Applications can be obtained in person in the Human Resources Department between 8:00 a.m. and 4:30 p.m. daily or printed from the web site at ********************** Applications may also be submitted online or e-mailed or faxed to ************. Successful candidates will be subject to Licking County's pre-employment drug screen and background check. Licking County is an Equal Opportunity Employer.

Location: Xenia, OH • Type: Full-Time • Salaried; Exempt • Reports To: Fleet & Trucking Manager At DanceOne, our fleet operations are essential to delivering world-class dance events across the country. We're looking for experienced, safety-driven CDL professionals ready to step into a leadership role supporting compliant, efficient trucking operations nationwide. This role is ideal for candidates with a strong foundation in driving and fleet operations who are eager to grow their leadership impact, support drivers, and help ensure every tour runs safely, smoothly, and on schedule. WHAT WE OFFER: Competitive Salary (Will be commensurate with CDL tenure, regulatory expertise, and leadership experience) Quality Medical, Dental, and Vision Coverage, along with options for FSA, HSA, and other supplementary insurance plans Employee Assistance Program (EAP): Confidential 24/7 support, including counseling and work-life resources, to promote employee well-being 401(k) with generous employer match Company-paid holidays and PTO The opportunity to play a key role in advancing safe, efficient, and compliant trucking operations supporting nationwide tours WHAT WE ARE LOOKING FOR: DanceOne is seeking a CDL-A licensed Assistant Trucking Operations Lead to support fleet safety, driver compliance, and DOT-regulated operations across national tours. This role partners directly with the Fleet & Trucking Manager and plays a critical role in maintaining a safe, compliant, and audit-ready fleet. WHAT YOU'LL DO: Operations & Dispatch Support Support load planning, dispatch execution, route optimization, and driver coverage Manage exceptions like breakdowns, delays, weather, and customer escalations Coordinate with maintenance on downtime, repairs, and vehicle readiness Ensure completion of BOLs, PODs, lumper receipts, and scale tickets DOT & Compliance Maintain and assist with DOT compliance systems and documentation Driver Qualification (DQ) files, Hours of Service (HOS) monitoring and corrections DVIRs, pre-trip/post-trip compliance, and defect resolution tracking Coordinate Drug & Alcohol program steps with HR/TPA and support DOT audits Safety & Company Standards Enforce safety policies; lead incident response, documentation, and corrective actions Run driver coaching on safety events, scores, and behaviors Conduct safety meetings, tailgates, and intervention tracking Samsara (Telematics, ELD, Cameras) Administer or backup Samsara: user setup, device health, geofences, and workflows ELD/HOS workflow management and safety/camera event review Build weekly/monthly safety and utilization reports Train drivers and supervisors on Samsara best practices Finance & Cost Controls Track operational costs, detention/layovers, accessorials, tolls, and fuel transactions Support payroll inputs and reduce cost leakage through documentation controls Continuous Improvement Maintain SOPs and update processes based on regulatory and operational learnings Participate in training programs and support standard work implementation WHAT YOU'LL DO: Valid Class A CDL (Required) MUST be 21 years of age or older Minimum 3-5 years of CDL driving and/or trucking operations experience Working knowledge of ELD systems, DOT regulations, and FMCSA compliance Proven safety-first mindset and operational discipline and leadership Join the team behind the movement. If you take pride in safe, compliant trucking operations, teamwork, and supporting complex, multi-state logistics, this is your opportunity to join a company that relies on disciplined fleet execution to deliver live events nationwide.EQUAL OPPORTUNITY STATEMENT DanceOne is an equal-opportunity employer and is committed to providing a workplace that is free from discrimination of any kind. We celebrate diversity and are dedicated to creating an inclusive environment for all employees. All employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by law. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. No mobile information will be shared with third parties/affiliates for marketing/promotional purposes. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting "Stop".

Operations Assistant Supervisor - OAS Full Time, Non-Bargaining The Operations Assistant Supervisor serves as an on-duty operational leader, assisting with responsibilities for directing daily EMS activities, guiding and directing personnel, and ensuring readiness of units, equipment, and supplies. This role bridges field operations and organizational leadership by coordinating resources, maintaining compliance with clinical and regulatory standards, and fostering a culture of safety, accountability, and customer service excellence. The OAS assists in real-time decision-making, oversees logistics and inventory control, ensures accurate documentation, and supports staff development-driving operational efficiency and quality patient care throughout each shift. This is a FT non-rotating 24 hour position. Essential Duties and Responsibilities Performs all duties and functions of a Paramedic Provide patient care as needed Conduct patient evaluations Demonstrates the ability of sound leadership skills Demonstrates the ability to educate, mentor, develop, coach, or motivate subordinates Processes and triages all requests from field staff for their shift and allocates resources or provide solutions Ensures the shift is operationally ready at all times. Oversees vehicle and equipment checks and readiness Performs supervisory functions as designated by policy or the department manager In the absence of management, acts as a liaison between the public and the organization, and acts as a point of contact for the organization during shift Ensure all patient care reports and shift logs are completed accurately and on time for the shift Interacts with all internal and external customers professionally at all times using proper etiquette and excellent customer service skills Ability to exercise independent judgement and work in a limited supervised environment and Is self-motivated Identify performance concerns and review performance of crews, providing positive, constructive feedback when needed Direct the work of others on shift Manages and implements system status plans Ability to employ discretion and confidentially of all information Maintain all certifications and education requirements for the position initially and throughout employment Completes and submits daily reports as required Communicates activities of the shift for a smooth transition between shifts Implement procedures accordingly following any and all equipment or system failure Develop and maintain strong collaboration with Dispatch to create a cohesive, innovative team Coordinates inventory of medical supply and equipment stock for shift and ensures product adjustments are properly applied. Qualifications Qualifications and Education 18 Years of age or older High School Diploma or equivalent Successfully pass a drug test and a criminal background check Valid Driver's License and be able to meet CCA's Insurability requirements Have a high degree of regular and predictable attendance Ability to read, interpret, and follow verbal and written instructions Ability to read, write, and speak English fluently and correctly Successfully complete an on-the-job training and/or orientation program Must have the ability to meet or exceed the essential functions of this position with or without reasonable accommodations Must maintain all certifications and licenses required for this position throughout employment Associates Degree or higher (Preferred) Paramedic EMS Certification At least one year experience as a Paramedic (Preferred) Experience with Interfacility Transport Familiarly with current software systems: Traumasoft and HealthEMS (Preferred) CPR, ACLS, and PALS certified or obtained within thirty days of hire FEMA's Independent Study for 100, 200, 700 and 800 certifications upon hire Must attend sufficient continuing education sessions either on or off duty to maintain their certifications or licenses Work Shift and Schedule The Operations Department is staffed 24-hours a day, 7-days a week. May be necessary to work day, evening, weekend, holidays and overtime as needed. May be called back or held over to maintain staffing levels. Work shift varies between twelve hour to twenty four hour shifts, with or without a rotation

Job DescriptionDescription: Join the Envases Ohio Team! Envases Group is a global supplier of high-quality packaging solutions, operating across three divisions: PET Packaging, Aluminum Beverage Packaging, and Food & Industrial Packaging. Each division brings specialized expertise to best serve our customers worldwide. Our core value is delivering reliable, high-quality packaging solutions while continuously growing our business and strengthening our position as a market leader. Envases Ohio is currently seeking a Palletizer Operator to support our continued growth at our Fremont, Ohio facility. This location specializes in industrial packaging commonly used for paint and similar products. Position Details Full-time, hourly position Competitive pay Growth opportunities Clean and safe work environment Key Responsibilities Maintain a clean workstation and production floor Prepare machinery and equipment for operation Follow production specifications and safety guidelines Work with consistent speed and accuracy to meet production standards Monitor product quality and remove defective items Operate mechanical or computer-controlled equipment Troubleshoot basic equipment issues and report concerns Perform other duties as assigned Requirements Must be at least 18 years of age Eligible to work in the United States Ability to pass background and drug screenings Ability to work in a fast-paced, dynamic environment Strong attendance and punctuality Good physical stamina and coordination Ability to stand and/or walk for extended periods, with frequent bending, twisting, reaching, and occasional lifting Team-oriented with good communication and basic math skills Mechanical aptitude and physical dexterity preferred Must be willing to Travel for training Envases Ohio is an Equal Opportunity Employer. Requirements:

Compound Operator- Join a Winning Team! Starting Pay: $20.00/hour + $2.00 Shift Differential Full-Time Days - 6:45am to 7:00pm (2-2-3 schedule) Nights - 6:45pm to 7:00am (2-2-3 schedule) Drive Your Career Forward with Deceuninck North America! At Deceuninck North America, we don't just build sustainable and innovative products-we build careers. Join a company where your hard work is recognized, your growth is supported, and your future is bright. We're looking for a Compound Operator to join our high-performing team. In this role, the Compound Operator is responsible for daily staging and operation of mixing equipment to meet the demand required. Compound Operator will be responsible for Quality, Safety and housekeeping during the shift while working in small teams What You'll Do: * Loading blend towers with raw materials. * Run batches as scheduled. * Assist in troubleshooting with other operators as needed. * Watch over equipment as other operators break for lunch. * Conduct routine checks relating to housekeeping and quality throughout the shift. * Make suggestions to improve production methods, equipment performance, product quality. * Suggests changes in working conditions and use of equipment to increase efficiency of department or crew. * Work on new equipment and production floor design as needed. * Participate in intra-company, cross functional improvement teams. What You Bring: * Ability to work outside for short periods in all seasons. * Good communication and listening skills * Ability to work 12-hour shifts What We Offer: * Competitive pay starting at $20.00/hour * Full benefits package including: * Medical, Dental, Vision * Company-paid Life Insurance * Short & Long-Term Disability * 401(k) with 6% company match * Paid Time Off & Holiday Pay * Opportunities for career advancement * A positive, team-oriented work culture We do pre-employment including pre-employment physicals and drug screens (including THC). Why Deceuninck? We're more than a workplace-we're a community. At Deceuninck, you'll find a culture that values teamwork, innovation, and personal growth. Whether you're just starting out or looking to take your career to the next level, we're here to support your journey. Ready to Get Started? If you're ready to be part of a company that values your contribution and invests in your future, apply today by submitting your resume. Let's build something great-together.

Who We Are Landmarc Environmental Systems, LLC (Landmarc) was conceived by a few environmental professionals, very experienced in both solid waste management and construction. Since then, Landmarc has grown dramatically into a multi-disciplined, vertically integrated landfill construction and service company. Our resources and unbeatable expertise enable us to respond quickly and effectively to the dynamics of the marketplace. We are one of the largest contractors in the nation to provide gas extraction, leachate collection, and operations and maintenance services for the landfill industry. For more information, please visit our website at ************************* Our company offers a unique working environment that specializes in a wide variety of projects ranging from drilling landfill gas extraction wells, installing new pipe systems to collect landfill gas, HDPE fusion, dropping and setting pneumatic pumps. Your role will be to support the project needs, such as digging trench, HDPE pipe fusion, dirt hauling, and overall site dress up. Benefits $17.00-$30.00 per hour pending experience/qualifications Life Insurance (Paid by the Company) Company Matching 40 IK Daily Per Diem (Lodging, Meals, Travel Expenses) Room for advancement within the Company Overtime available (40-75 HRS is typical) Benefits begin on the first day of employment Comprehensive Health Coverage: Medical, dental, and vision insurance Financial Security: Paid Time Off - PTO, Holidays, 401(k) with company match, health savings account, and flexible spending accounts Professional Growth: Tuition reimbursement and support for continuing education Additional Benefits: From day one, disability insurance, an employee assistance program, Paid Parental Leave, Identity Theft, and Pet Insurance to name a few Essential Duties & Responsibilities Travel for extended periods of time - 4 weeks on, 1 week off Living in hotels & traveling between states 100% of the time Walk long distances, up and down steeply sloped landfills and outdoor terrain Ability to do heavy, manual work Lift a minimum of fifty (50) pounds on a non-consistent basis Work in extreme (hot and cold) weather conditions safely including on very odorous project sites Clean up work areas, clean and fuel vehicles, and equipment as necessary Available to work overtime and weekends if necessary Assist site supervisors with the materials and equipment needs and helping to collect supplies for projects Perform system construction activities in a safe and proper manner Fuse HDPE pipe ranging from 2"- 36" Operator Responsibilities/Qualifications Perform daily maintenance and safety checks of equipment Conduct pre-operational checks on equipment, and clean, lubricate and refill equipment as necessary Work with ground personnel in the excavation and installation process of laying pipe online and grade Ensure trench is excavated to the proper depth/grade Ability to grade on 1:1, 2:1, and 3:1 slopes Cut grade with minimal time spent on excavating to ensure production is on schedule Conduct trench work, which meets 01 ISA requirements Operate Excavator, maintaining proper awareness of one's surroundings. Ensure a sound understanding of the issues involving ground disturbance Perform routine cleaning and maintenance to ensure smooth operation of the Excavator Ability to step out of equipment and assist with groundwork if necessary Landfill construction experience preferred Oil and Gas pipeline experience 5+ years' experience in operating excavator, dozer, and articulated dump truck If you are qualified, want a new opportunity and are looking for a solid future, send in your resume! And please, check out our website ************************* EOE/AA/M/F/Vet/Disability Landmarc Environmental Systems maintains a drug-free workplace.

Hilco Vision is an industry leading global eyewear/eye care company delivering comprehensive solutions to customers, built on a platform of innovation and operational excellence. It has direct subsidiaries in the USA, Canada, UK, Germany, Australia, China, Hong Kong, Belgium and the Netherlands. The company's product portfolio encompasses Prescription Safety, Lenscare, Eyewear Accessories, Lab & Dispensing, Ocular Surface, Exam Supplies, and Vision Testing. Hilco Vision has a state-of-the-art facility in Fairfield, Ohio! We are currently searching for Packaging Operators to join the team! The Packager, Towelettes is responsible monitoring pre-moistened towelettes being manufactured by machine, inspecting these products for quality, and hand-packaging them in accordance to Hilco Vision's quality standards. The shift for this role is 6:30am - 3:00pm and requires the ability to lift 20lbs, stand for long periods of time, and complete repetitive motions. Check out this video below: Hilco-Vision-Fairfield_JOBSON-Lens-Wipe_DJI_20221027_0013.MP4 Qualifications: Adhere to all organizational safety practices including following appropriate procedures, as well as the proper wearing of required PPE in designated areas Attention to detail and processes in order to reach a common goal of producing a great product for all customers Read, write, speak and understand English in order to comprehend specification sheets for customer orders and complete quality sheets Learn new processes and procedures -- willing to jump in and help, as well as learn more skills in order to grow 1 - 3 years of related production experience Responsibilities: Monitor machine production for pre-moistened towelette wipes, folding boxes for each job Visually inspect the quality of product for leaks, correct alignment, artwork, and all other defects. Verify the weight of finished product using the scales provided to ensure accurate volume of liquid is being applied to the wipe and the correct number of wipes are packed in the box. Refer to order specification sheets to ensure product is properly packed, all labeling is properly applied, and all labels contain accurate information. Perform other department and job-related duties as assigned Physical Requirements This role requires the ability to lift 20 - 40lbs, standing for long periods of time, and moving quickly Benefits: Weekly Pay Safety footwear reimbursement PPE provided by the organization (safety glasses, etc.) Know anyone amazing? We offer a referral bonus equal to $1,000! Medical, dental, and vision coverage Paid time off 401K Savings plan Robust EAP program Incentive Plan: Attendance- Employee must have worked 85% (148 hours) of the working days in a given month for the home department earning the incentive. Productivity- Must have efficiency more than 85% minimum for the month. Violations- If an employee receives a write up due to a policy violation or quality issue, they will not be eligible for the incentive for that month. Employment- Must be a full time Hilco employee for more than 30 days. The employee must be actively employed on the date of the incentive payout to receive it.

Do you want to operate and work on modern well-maintained equipment for a change? Are you mechanically inclined? Do you have experience operating heavy equipment? This role offers: -Fast paced environment -Great benefits -Competitive pay -Incentive plan We are currently seeking self-motivated and dependable full-time Maintenance Operator. As a Maintenance Operator, you will regularly be maintaining/fixing equipment, operating the aggregate plant, and operating a front-end loader (once trained). Maintenance Operators work in a fast-paced environment and are provided with a variety of challenges. We are proud to use modern and well-maintained equipment. The ideal candidate will have at least one year of experience working within an aggregate quarry/mine and proven safety track record, however we are open to develop candidates with great overall experience outside of aggregates. Being able to think and act on your own is very important for this role. Core Competency Areas & Responsibilities: 1. Equipment Operation & Production Support Operate a front-end loader safely and efficiently to feed material into the aggregate processing plant. Perform routine equipment inspections and complete daily preventative maintenance and safety checks. Use programmable logic controls (PLCs) for basic operation and system monitoring as required. 2. Mechanical Maintenance & Troubleshooting Conduct diagnostics, maintenance, and repair of plant equipment including screens, conveyor belts, crushers, and motors. Replace and adjust mechanical components to ensure proper equipment function. Maintain operational continuity by identifying wear or failures and correcting issues quickly. 3. Fabrication & Tool Use Use welding, cutting, and fabrication skills to repair or reinforce plant components as needed. Operate a variety of hand and power tools including grinders, cutting torches, impact wrenches, and more. Maintain tools and equipment in safe, working condition. 4. Safety & Compliance Work in compliance with all company policies, safety protocols, and environmental regulations. Support the creation of a safe work environment through hazard recognition and proactive risk mitigation. Participate in safety meetings and training programs. Key Skills & Qualifications: Mechanical Aptitude: Ability to identify, troubleshoot, and repair mechanical systems and equipment. Heavy Equipment Operation: Experience operating front-end loaders or similar equipment. Welding & Fabrication: Basic to intermediate welding and fabrication experience. Safety Awareness: Commitment to maintaining a clean, hazard-free, and compliant work environment. Communication: Strong verbal and written communication skills for reporting and coordination. Physical Endurance: Ability to lift 50 lbs., work in inclement weather, and climb ladders/stairs up to 24 feet. Minimum Requirements: High school diploma, GED, or High School Equivalency (HSE). Valid driver's license. Prior experience in a plant or industrial setting, particularly with aggregates or construction materials. Ability to work overtime, weekends, and flexible shifts as needed. EOE/M/F/Disabled/Veteran/DFSP

Full-time Description Immediate openings for Class B CDL drivers with tanker endorsement to drive and operate Large Vacuum Trucks. We perform industrial and pipe cleaning for manufacturing and municipal customers. Experience with Vactor Trucks, Guzzler Trucks, other vacuum trucks a plus and will be considered in pay. There is the availability of overtime paid at 1 1/2 times pay. Qualifications: Must be able to pass a drug test Must have valid driver's license Ability to work overtime & weekends Benefits include: Medical, Dental, Vision, Life & 401k Job Type: Full-time Pay: starting pay $20-$26 per hour Salary Description $20-$26 per hour

Job Description Looking for a full time 1st shift CNC Operator at a Family Owned forging company! Details are listed below: Okuma CNC Operator involves setting up, operating, and maintaining Okuma brand computer numerical control (CNC) lathes and mills to produce high-precision parts. Key duties include reading blueprints, programming Okuma's OSP controls, loading materials, performing routine maintenance, inspecting parts for quality, and ensuring adherence to safety and production standards. This role requires strong attention to detail, technical skills in machining, and familiarity with CNC programming and quality control

Job Description Job Title: Operator Location: Traveling Position (to Ohio, Maryland and West Virginia, Indiana, Michigan, New Jersey, New York, other states as needed) Company: SAGE Fence Job Type: Full-Time Salary: Competitive, based on experience Benefits: Health insurance, paid time off, retirement plan, and more About Us: At SAGE Fence, we pride ourselves on delivering high-quality, durable fencing solutions across residential, commercial, and industrial projects. We are a team-oriented company that values leadership, craftsmanship, and a strong commitment to customer satisfaction. Position Overview: SAGE Fence is seeking a reliable and hardworking Operator to join our growing operations team. As an Operator, you'll be responsible for operating equipment and tools used in the production and installation of fencing systems. This position requires attention to detail, physical stamina, and a strong work ethic. Key Responsibilities: Operate machinery and tools to fabricate, cut, or install fence materials Read and follow project plans or supervisor instructions to meet quality standards Assist with loading/unloading materials and site setup Ensure safety procedures are followed at all times Perform routine maintenance on equipment as needed Communicate with team members to coordinate workflow and resolve issues Maintain a clean and organized work area Qualifications: Minimum of 2 years previous experience in equipment operation Ability to operate hand and power tools safely and efficiently Physical ability to lift up to 75 lbs and work outdoors in various conditions Strong attention to detail and commitment to safety Reliable transportation and valid driver's license. CDL license preferred but not required Willingness to learn and follow instructions OSHA 10 & 30 preferred Ability to pass a 10-panel drug screen and background check Why join SAGE Fence? Competitive Pay & Steady Hours - Reliable, consistent work with industry-leading compensation Career Growth - Ongoing training and advancement opportunities to help you build your skills and move up Comprehensive Benefits - Health coverage, retirement/pension plans, paid holidays, and PTO Team-Oriented Culture - A supportive, safety-first work environment where your contributions matter Meaningful Work - Be part of projects that shape and secure communities across the region Union Benefits - Specific benefits and packages are determined by union status Travel Support - Per diem and travel time compensation for projects over 90 miles from your home Performance Bonuses - Annual bonus opportunities based on individual and company performance Equal Opportunity Employer - SAGE Fence is committed to creating a diverse environment and is proud to be an equal opportunity workplace.

Job DescriptionSalary: Hourly DOE Keller Brothers Enterprise Tiffin, Ohio Keller Brothers Enterprise is seeking an experienced Lowboy Operator to join our growing team. This position is ideal for a skilled CDL driver with hands-on experience hauling heavy equipment who takes pride in safety, precision, and professionalism. Position Type: Full-Time Location: Tiffin, OH (Local & Regional Hauls) Pay: Competitive, based on experience Start Date: Immediate Benefits Full benefits after 30 days (health, vision, life, company match retirement) PTO at hire Uniforms provided Overtime available, home daily Job Responsibilities Safely operate lowboy trailers to transport heavy equipment and machinery Load, secure, transport, and unload equipment following DOT regulations and best practices Perform pre-trip and post-trip inspections on truck, trailer, and securement equipment Ensure loads are properly balanced, chained, and tarped when required Maintain accurate logs, paperwork, and delivery documentation Communicate effectively with dispatch, customers, and job sites Operate in a professional and safety-focused manner at all times Job Requirements Valid Class A CDL (required) Minimum of 2 years lowboy or heavy equipment hauling experience (required) Clean driving record with a strong safety history Ability to pass DOT physical and drug screening Knowledge of load securement, chaining, and heavy haul regulations Reliable, punctual, and able to work independently Experience hauling construction, agricultural, or industrial equipment Oversize/overweight load experience Preferred (Not Required) Mechanical knowledge or equipment operation experience Why Work With Keller Brothers Enterprise Family-owned and operated company Well-maintained, modern equipment Competitive pay based on experience Steady work and a supportive team environment Opportunity for long-term growth To Apply: Please submit your application.

Now Hiring: PEM Machine Operator | Aurora, OHShifts: Weekend Shift: Friday: 12:00 PM to 12:00 AM Saturday: 11:00 AM to 11:00 PM Sunday: 10:00 AM to 10:00 PM Weekend shift is paid for 40 hours while working 36 Location: Aurora, OH (specific building assigned upon hire) Pay & Benefits: $20 to $22 per hour, depending on experience and shift Contract-to-hire opportunity with long-term growth potential Comprehensive benefits package upon hire, including: 100% employer-paid medical, dental, and life insurance (employee only) 401(k) with company match (100% of the first 3%, 50% of the next 2%) Paid time off and holidays Stable workplace with ongoing demand and modern equipment Job Overview: The PEM Operator is responsible for the setup and operation of PEM insertion machines used in the fabrication of custom metal components. This is a hands-on role ideal for someone with previous machine operating experience and attention to detail.Key Responsibilities: Set up and operate PEM insertion machines based on product specifications Upload and execute machine programs according to job requirements Insert PEM-style fasteners as defined by the blueprint Validate finished parts meet customer requirements Perform light math functions (counts, part tracking, basic totals) Maintain a clean and organized work area Operate independently while staying on task Identify production issues and notify supervisors when needed Required Qualifications: Minimum 12 months of prior machine operation experience High school diploma or equivalent Ability to read blueprints and use tape measures, calipers, and other small tools Good work ethic and attention to quality Able to stand for long periods and lift up to 35 lbs Strong visual acuity for inspecting completed parts Workplace Environment: LayerZero operates three nearby facilities with state-of-the-art machinery including lasers, press brakes, and robotics. You'll be part of a high-demand production process that includes fabrication, inspection, and final assembly of custom electrical control panels. With a 10-month order backlog and strong customer relationships, this is a place where reliable employees can build a long-term future.Pre-Employment Requirements: 5-panel drug screen Background check Dress Code: Steel-toe boots, jeans, and t-shirt required Safety gear provided as needed

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: An EDM operator is needed to operate the sinker/wire EDM machines. This is a 1st shift position, Monday - Thursday 5:30 am - 4:00 pm. Essential Responsibilities: Change and set electrodes Read micrometers, calipers, indicators, and comparator Read blueprints Identify visual defects Use and check various fixtures Identify alarm codes Start and stop machine Identify and correct machine operational problems Know and understand the ISO 9001/AS 9100 and Nadcap procedures and requirements Perform daily maintenance using a checklist Verify settings for special process approvals Communicate any questions and verify completeness and accuracy Understand, use, and follow work instructions Qualifications: High School Diploma/GED Sinker EDM experience; preferred Machining experience a plus Strong Mechanical aptitude Good communication and problem-solving skills Handle multiple tasks/projects simultaneously Team player Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Ferco Aerospace Is Searching for an Experienced Prototrak Machinist Are you a skilled craftsman who takes pride in your precision and creativity? Do you measure five times and cut once? At Ferco Aerospace, each job presents a unique puzzle waiting to be solved. If you thrive on challenges, excel at working with exotic materials, and value both speed and accuracy, we'd love to have you on our team. We're seeking a Prototrak Operator who values honesty, efficiency, and precision. In return, we offer a fulfilling work environment where you can build a legacy, develop your strengths, and collaborate with a team of talented specialists. This is a full-time, 2nd-shift position with benefits, in a rapidly growing aerospace company that prioritizes investment in its business and employees. If this doesn't describe who you are, we respectfully ask that you don't apply-this role won't be the right fit for you. Key Responsibilities: Fabricate and modify parts to create or repair machine tools, utilizing knowledge of mechanics, mathematics, metal properties, and machining procedures. Set up and operate Prototrak equipment. Determine necessary tasks to complete machined products efficiently. Perform machining operations such as turning, reaming, boring, facing, and threading parts. Build product acceptance tooling and gauges. Follow job routers and blueprints to determine machining requirements, including sequences of operations, tooling, feeds, and speeds. Verify products and work for conformance to specifications. What We're Looking For: Ability to multitask and meet deadlines. Strong work ethic, self-starter mentality, and good attendance. Willingness to learn and grow in the role. High School Diploma or GED required. Prototrak experience is a must. Position Demands: Lift and/or move up to 25 pounds regularly and stand for extended periods. Perform bending, twisting, turning, carrying, walking, sitting, stooping, and kneeling. Pass vision screenings. Perform repetitive duties, such as hammering a part to specification. Work extended hours during peak workloads or special projects. Schedule: Training: Monday - Thursday, 6:00 AM - 4:30 PM. Overtime may be required daily and on Fridays. 2nd Shift: Monday - Thursday 3:30 PM - 2:00 AM Overtime may be required daily and on Sundays. Eligibility Requirements: This role is restricted to U.S. persons (U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. Proof of status will be required prior to employment. What We Offer: Competitive benefits package. 401(k) matching. Paid time off and holidays. Shift diffrential.