Repair technician jobs in Boston, MA - 2,196 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

This company has over 160 years of experience as a processing and packaging machine manufacturer with a global presence in more than 30 countries, rest assured;no day will ever be identical. The client's customers are as diverse as their products, ra Field Service Technician, Service Technician, Field Service, Field Technician, Service Tech, Technician, Retail, Staffing

Compensation: $40,000-$100,000 The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type and years and experience within the industry, education, etc. Do you have a passion for repairing cars, assisting with providing exceptional guest experiences, and being an innovator in the automotive industry? As an Automotive Service Technician, you will have the opportunity to make a positive impact on our business and customers every day while earning the pay you deserve and awesome benefits! We are looking for smart, energetic, technically-focused Technicians who will help us redefine the car-servicing experience. The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnosis with some assistance. These repairs include but are not limited to light engine work, transmissions, clutches, drive shafts, electrical systems (starters and alternators) HVAC systems, steering & suspension systems. This individual will have a majority of their manufacture certifications. Make accurate use of the multi-point inspection form on each vehicle Document all work performed and recommended on assigned repair order Communicate with service advisor when additional work is needed or if repairs cannot be completed within the promised time Maintain technician proficiency as specified by Asbury standards Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical Perform all levels of diagnosis and repair on vehicles Perform all levels of preventive/routine maintenance services Utilize product and technical training as assigned by the manufacturer and management Participate in manufacturer-sponsored training programs and schools to continuously expand your knowledge of new technology Maintain manufacturer (CSI) Customer Satisfaction Index at or above the Asbury specified goal(s) in service for district, regional and national scores Complete the work, notations and time-keeping necessary to the successful completion of warranty repair orders and the filing of warranty claims Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the dealership, its customers or employees Take care to ensure that customer's vehicles are returned to them as clean as they were prior to being serviced Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all customer vehicles, property and information ASE certifications heavily preferred Manufacturer certifications heavily preferred Previous automotive technician experience required Must have basic tools Must have great technical and mechanical skills Must be a team player and have the ability to work repetitively on complex tasks Must be a minimum of eighteen years of age Must have a valid driver's license Must be able to pass pre-employment screening (background & drug test) Company Benefits: Pay and Recognition: Weekly pay Paid holidays & paid time off Paid training Stock Awards(select management and front-line team member's eligible Insurance / Retirement: Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans Up to 12 weeks paid pregnancy leave (disability leave) Paid Parental Leave Health savings Flex spending accounts (tax free) Short-term and Long-term disability plans Life Insurance (Whole Life and Term) 401k with company match Learning, Tuition Assistance and Career Development: Digital career path tool to assist with career development Continuous training through Asbury's Internal Learning Management System Professional growth and development opportunities Additional advantages: Student loan relief resources Employee assistance program Employee discounts on parts and service repairs Scholarship awards Opportunities to join our community service initiatives, which includes paid volunteer hours Aggressive Employee referral program with bonus opportunities INDTECH

Title: Maintenance Technician Pay Rate: 30-34/HR Hours: M-F 7am - 3:p30pm Overview of Work Environment/Client Nuances: 3 buildings on site - Warehouse - Office building - Production site There will be client interaction Team Overview: Working closely with small team Resource's typical working day: Small maintenance projects Fire extinguisher inspections Working with janitorial team to ensure that all tasks are completed Service requests from client Working with WPS manager on other tasks Must Have Skills: Must be able to hit the ground running to take on tasks Must be a self-starter and proactive Good customer service skills Great communication skills Good understanding of overall maintenance skills - Basic electrical skills - Basic plumbing skills - Basic carpentry skills Nice to have skills: Painting/patching Advanced maintenance skills Years of Experience: 3-5 years Education h.s. diploma or GED Software skills: Basic computer skills Emailing skills About the Role: As a Maintenance Technician, you will be responsible for maintaining small to medium-sized buildings, industrial systems, and equipment. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. What You'll Do: •Perform ongoing preventive maintenance and repairs on mechanical, electrical, and other building systems. •Conduct routine maintenance inspections, diagnose potential problems, and make repairs. •Assist with the installation and modification of building equipment and systems. •Review assigned work orders and partner with available systems to track completion. •Support energy management by ensuring all building systems are operating efficiently. •Inspect existing installations for compliance with building codes and safety regulations. •Use existing procedures to solve straightforward problems. Exchange straightforward information in a clear, concise manner. •Impact team through defined duties, methods and tasks as described in detail. •Deliver own output by following defined procedures and processes under close supervision and guidance. What You'll Need: •High School Diploma, GED, or trade school diploma with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. •Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. •Ability to follow basic work routines and standards in the application of work. •Communication skills to exchange straightforward information. •Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc. •Strong organizational skills with an inquisitive mindset. Kindly share your resume with answers: Q1: How far you live from 1 Elmwood Ave, Burlington VT and how will you commute daily Q2: how many years of exp as Commercial Building Maintenance exp you have Q3: for submission client needs MM/DD of Birth - kindly share

When you join the growing BILH team, you're not just taking a job, you're making a difference in people's lives.Contributes to the Hospital's mission by performing and assisting cardiac stress test for physician review and interpretation. This clinical staff position will have an impact on improving patient and physician satisfaction by providing the best possible experience for our patient as well as providing quality test results for physician review. n satisfaction by providing the best possible experience for our patient as well as providing quality test results for physician review.Job Description:QUALIFICATIONSEducation Required: High School Diploma or G.E.DEducation Preferred: Two-year allied health degree Experience Required: Knowledge of cardiac physiology either acquired on the job or through formal training Experience Preferred: Experience in a medical setting LIFE SUPPORT CERTIFICATION REQUIRED: BLS Required, ACLS PreferredJOB FUNCTIONS As part of the Cardiology team, the Cardiac Stress Technician:Performs inpatient and outpatient cardiac stress test to physician orders.Interviews the patient for symptoms, current medications and cardiac history and documents information in patient chart.Prepares patient for procedure by preparing skin for electrode placement, demonstrates proper testing technique (if patient is walking) and accurately placing electrodes on patient. Acquires and documents base line EKG, blood pressure, heart rate, and oxygen levels. Assists physician with monitoring and documents patient vital signs during and after testing and notifies physician and/or appropriate personnel of any adverse reaction.Completes patient worksheet and finalizes report for physician review.Cleans all testing equipment after each exam. Pay Range: $21.00 - $28.26The pay range listed for this position is the base hourly wage range the organization reasonably and in good faith expects to pay for this position at this time. Actual compensation is determined based on several factors, that may include seniority, education, training, relevant experience, relevant certifications, geography of work location, job responsibilities, or other applicable factors permissible by law. Compensation may exceed the base hourly rate depending on shift differentials, call pay, premium pay, overtime pay, and other additional pay practices, as applicable to the position and in accordance with the law.As a health care organization, we have a responsibility to do everything in our power to care for and protect our patients, our colleagues and our communities. Beth Israel Lahey Health requires that all staff be vaccinated against influenza (flu) as a condition of employment.More than 35,000 people working together. Nurses, doctors, technicians, therapists, researchers, teachers and more, making a difference in patients' lives. Your skill and compassion can make us even stronger.Equal Opportunity Employer/Veterans/Disabled

Apartment Maintenance Technician - Haverhill, MA 01830 Step into a hands-on role where your maintenance skill set keeps a busy community running smoothly. You'll handle essential repairs, unit turns, and help create a safe, comfortable living environment for residents. Job Description Support all facets of apartment maintenance Complete work orders efficiently Perform electrical, plumbing, HVAC, and appliance troubleshooting Prepare units for move-ins Maintain clean and safe common areas Schedule Mon/Wed/Fri: 7:30am-4pm Tue/Thu: 8am-4:30pm Pay $24-25/hr Contract role Required Skills Prior apartment or facilities maintenance experience Ability to work independently Proficiency in general maintenance trades Must have own tools Benefits Through BGSF: Weekly pay Health, dental, and vision insurance options PTO or sick leave where applicable per state/local law Referral bonuses BGSF is a staffing firm, nationwide #ZIPC #BGN BGSF is an Equal Opportunity Employer. We are committed to providing equal opportunities for employment to all qualified people, regardless of race, color, national origin, religion, sex, age, disability status, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law.

Experience level: All Experience Level Experience required: 3 Years Education level: High school or equivalent Job function: Manufacturing Industry: Aviation & Aerospace Visa sponsorship eligibility: No We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay Depend on Experience. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

IPG Photonics is the world leader in high-power fiber lasers for industrial welding, cutting, and marking applications. We are seeking a dependable and detail-oriented Technician - Service to join our service depot team. In this role, you will perform repairs, testing, and maintenance on laser systems and components under the guidance of senior staff. This is an excellent opportunity for a technician to grow their hands-on skills and contribute to high-impact laser applications. JOB FUNCTIONS Duties/Responsibilities: * Perform repairs, testing, and maintenance of laser systems and subsystems in the service depot. * Follow detailed work instructions and repair documentation to complete service tasks accurately. * Assist in troubleshooting of mechanical, electronic, and optical components under supervision. * Prepare systems and components for shipment, including inspection and proper packaging. * Enter service data into ERP and CRM systems to document completed repairs. * Collaborate with senior technicians on complex repairs and escalations. * Participate in ongoing training to build skill sets across mechanical, electrical, and optical systems. * Maintain a clean, organized, and safe work area in alignment with 5S principles. * Support continuous improvement efforts by identifying minor process improvements. Additional Responsibilities: * Ability to interpret electrical drawings. * Experience with industrial lasers, accessories, and related diagnostic equipment. * Excellent electrical/electronic troubleshooting skills with high and low-voltage equipment. * Maintain a safe, clean, and organized work environment. QUALIFICATIONS Education: * Associate or Technical degree preferred, but extensive experience in a similar hand-on experience will be considered. Experience: * 2-4 years of experience in industrial laser systems, cutting, welding, or marking applications. * Experience working with laser, electrical, or electro-mechanical systems is a plus. * Experience with 5S, Lean, and continuous improvement methodologies is a strong plus. Required Abilities: * Proficient mechanical aptitude and basic troubleshooting ability. * Strong attention to detail and accuracy in documentation. * Eagerness to learn from senior technicians and grow within the team. * Basic familiarity with CRM or ERP systems is a plus. * Ability to follow technical instructions and safety procedures consistently. Physical Requirements: * Prolonged periods of standing and working in a repair environment. * Extended periods of sitting at a desk using a computer and test equipment. * Ability to lift 15 pounds regularly and up to 50 pounds occasionally. * Ability to navigate the organization's facilities and travel as needed. * Occasional travel (up to 10-15%) for field repairs or support projects. Education: * Associate or Technical degree preferred, but extensive experience in a similar hand-on experience will be considered. Experience: * 2-4 of experience in industrial laser systems, cutting, welding, marking applications or related experience (similar electronics experience will be considered). * Experience working with laser, electrical, or electro-mechanical systems is a plus. * Experience with 5S, Lean, and continuous improvement methodologies is a strong plus. Required Abilities: * Proficient mechanical aptitude and basic troubleshooting ability. * Strong attention to detail and accuracy in documentation. * Eagerness to learn from senior technicians and grow within the team. * Basic familiarity with CRM or ERP systems is a plus. * Ability to follow technical instructions and safety procedures consistently. Physical Requirements: * Prolonged periods of standing and working in a repair environment. * Extended periods of sitting at a desk using a computer and test equipment. * Ability to lift 15 pounds regularly and up to 50 pounds occasionally. * Ability to navigate the organization's facilities and travel as needed. * Occasional travel (up to 10-15%) for field repairs or support projects IND456 #ZR

We're looking for a Technical Lead to join our Product Engineering team at our HQ in Kendall Square. This is a fantastic opportunity to work with an amazing team and make a real and immediate impact for our members and users. What you'll be doing: Build and test features for a rapidly growing consumer-facing application. Take a lead role in steering architecture to scale technology and process to a high scale and quality. Work closely with stakeholders in various internal groups to help balance delivery speed and quality. Mentor and train junior developers to maximize team velocity. About you and your skills: Customer focused outlook on software design. 5+ years building out maintainable applications with modern programming languages such as Java and Javascript Experience building solutions for AWS (or other cloud services) Experience working with distributed systems (microservices) Experience with containers and container orchestration systems a plus! Benefits: We pay 100% of the cost of both your medical and dental premiums directly to the insurance companies Establish an HSA to cover any out-of-pocket expenses you may incur that are not covered by the insurance Employee parking/MBTA costs Host lots of fun all-company events Fully stocked kitchen

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role:Technology Lead - Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava Duration: Full TIme Location: Cranston, RI Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education • At least 4 years of experience with Information Technology Preferred • At least 4 years of Java development experience, ideally in a team lead role • Knowledge of architectural design patterns, performance tuning and functional designs. • At least 4 years of experience in Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava • Ability to develop functional, technical and user interface designs for an application that meets the defined requirements (business, system performance and standards) • At least 4 years of experience in specific coding concepts and/or languages, especially around modern application architectures. • At least 2 years experience with web applications that use responsive design to better support mobile browsers. • AT least 2 years of experience in highly-secured online environments that use n-tier designs and extensive firewalling to enhance security. • At least 4 years experience interfacing with back-end applications using MQ, SOAP, RESTful services, and JSON. • At least 2 years of experience in multi data center physical implementation models for scalability and resilience. • Experience with Spring Boot, Netflix OSS, HATEOAS, Gradle/Maven is a plus. ReST/Resource Oriented Design, Wiremock, JUnit/Mockito/Assert4J, AMQP/JMS/MQ, Functional Reactive/ Lambdas/Streams, Agile/Jira,Jenkins/Cobertura/PMD/FindBugs are good to have. • Experience and desire to work in a Global delivery environment • Communication and Analytical skills Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Additional Information All your information will be kept confidential according to EEO guidelines.

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $50.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Responsive recruiter Benefits: Competitive salary Dental insurance Health insurance Paid time off Training & development Vision insurance 401(k) matching The Fiberglass and Gelcoat Repair Technician is responsible for performing high-quality repairs on fiberglass boat hulls and structures. This role requires a keen eye for detail, strong technical skills, and the ability to work efficiently to ensure customer satisfaction and safety. JOB DUTIES/RESPONSIBILITIES: Repair and Maintenance: Perform repairs on fiberglass boat hulls, decks, and other structures, including gelcoat repairs, structural repairs, and cosmetic refinishing. Inspection and Diagnosis: Inspect damaged boats to determine the extent of damage and the best repair methods. Use diagnostic tools and techniques to identify issues accurately. Preparation: Prepare surfaces for repair by cleaning, sanding, and masking as necessary. Ensure all surfaces are properly prepped to achieve a high-quality finish. Application: Apply fiberglass matting, resin, and gelcoat to repair damaged areas. Ensure proper curing and finishing techniques are used to match the original appearance and strength. Quality Control: Conduct thorough inspections of completed repairs to ensure they meet quality standards and customer expectations. Address any issues promptly. Documentation: Maintain accurate records of repairs, including work orders, parts used, and time spent on each job. Ensure all documentation is complete and up-to-date. Safety Compliance: Follow all safety protocols and guidelines to ensure a safe working environment. Use personal protective equipment (PPE) as required. Team Collaboration: Work closely with other technicians, service advisors, and management to ensure efficient workflow and high-quality service delivery. Perform related tasks such as shrink wrapping, detailing, pressure washing, bottom painting, bottom scraping, block and stand vessels, and vessel maintenance. REQUIREMENTS: Experience: Minimum of 2 years of experience in fiberglass repair and gelcoat, preferably in a marine environment. Skills: Proficient in fiberglass repair techniques, including gelcoat application, sanding, and finishing. Strong attention to detail and craftsmanship. Knowledge: Understanding of marine safety standards and repair procedures. Familiarity with various types of fiberglass materials and resins. Physical Requirements: Ability to lift heavy objects, stand for extended periods, ascend/descend a ladder and work in various weather conditions. Manual dexterity and hand-eye coordination are essential. Communication: Excellent verbal and written communication skills. Ability to explain technical information to non-technical customers. Certifications: Relevant certifications in fiberglass repair or marine technology are a plus. Work is performed in a workshop environment with exposure to dust, fumes, and noise. May require occasional overtime or weekend work to meet customer demands. Compensation: $26.00 - $35.00 per hour Freedom Boat Club of Greater Boston & Cape Cod Freedom Boat Club of Ocean and Monmouth Counties, New Jersey We are a Freedom Boat Club franchise owned and operated by the Carrick Group LLC/M&M Jersey Marine LLC. We operate 20 Massachusetts club locations and nine New Jersey (north Jersey shore) club locations with our operations center located in Plymouth, MA. Freedom Boat Club is the world's oldest and largest membership boat club with over 30 years of experience offering members access to over 400 locations in the U.S., Canada and Europe. We take care of the maintenance, cleaning, repair, insurance and storage. The fleet includes bowriders, pontoons, and center console fishing boats. ******************************** We work in this field because it's fun! Solitude. Fishing. Adventure. Sandbars. Sightseeing. Watersports. Family Time. This is why we do it. We do it for the fun. We do it for the firsts. We do it because we love to see the smiles, the pictures, the fish, and the accomplishment. We truly get joy from witnessing the joy we bring to others. Some would say we work so you can play. While we don't disagree, we don't always feel like what we do is work. We're pretty committed to the concept of successful and casual. Suits and ties have no place here, we traded those in long ago for boat shoes and sunscreen.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Under general supervision, this individual will perform diagnosis, troubleshooting and repair or replacement of all mechanical assemblies used in FLIR Thermal Imaging Systems products. This individual will help identify and select the appropriate tooling, processes and procedures to complete any repairs, refurbishment, test and validation of work performed. Accurate and appropriate performance of these tasks will result in the successful repair and maintenance of these products **Primary Duties & Responsibilities:** 1. Conduct routine diagnosis, repair, refurbishment, service and support of mechanical assemblies, sub-assemblies, motors, bearings and wiring harnesses for all FLIR Imaging Systems' products. 2. Assist in developing standard repair and maintenance procedures which will be documented to company and ISO standards. 3. Provide technical support in the development of customer service spare parts inventory, including establishing requirements for content and quantity. 4. Provide accurate and timely repair estimates that include labor and material requirements. 5. Support the servicing of Imaging Systems demonstration equipment. 6. Perform other job related duties as required. 7. Work as a member of the service team to meet department goals related to repair turn times and customer satisfaction. **Job Qualifications:** + Requires a minimum of 1-2 years prior work/schooling experience in a related electronics field. + Degree or certificate in electronics or equivalent required. + Strong electro-mechanical troubleshooting skills, proficient with using electronic test equipment required such as digital voltmeters to perform continuity of system wiring. + A good working knowledge of computers, computer peripherals and programs such as SAP. + Must be able to read Schematics and wiring diagrams. + Must be capable of lifting a minimum of 45 pounds unassisted. + Must be able to solder 26Awg wires and 402 Smt components. + Preferred candidate will have 1-3 years prior experience servicing thermal imaging equipment. Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. \#FLIR **Salary Range:** $49,300.00-$65,700.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

**Are you motivated and eager to grow your career in refrigeration?** Hussmann's team of Technicians maintain, diagnose, and repair HVAC/R in supermarkets, convenience stores, cold storage facilities. Build your career with industry leaders since 1906. Join our team of hardworking, refrigeration experts and discover your potential. **Why Hussmann?** + Bi-annual bonuses based on performance + Paid training and access to online training videos + Paid drive time (including overtime) + 22 days paid off - 10 days of vacation, 12 company holidays + Company vehicle provided + On-the-job, hands-on training opportunities for Technicians, electric and mechanical theory, and model-based training + Sign-on bonus available **Responsibilities** Lead a team of service technicians based upon a specified geographic area or project/customer assignment to respond the customer's need for service and maintenance of equipment through maintenance, diagnosis and repair of refrigeration, heating & air-conditioning system commonly installed in supermarkets, convenient stores and cold storage facilities. + Development and maintenance of excellent customer relations. Fluent in applicable customer systems, business processes, administrative support, etc. + Actively pursuing personal development & supporting technician growth and development. Intrinsically involved with screening, interviewing, and hiring new technicians. + Under the direction of the Service Manager perform survey of new customer sites and assist in quoting service and maintenance. Assist with job quoting, staffing, estimating, understanding of project costing & drivers, etc. + Implement pertinent training and provide opportunities for ongoing professional development for technicians. + Coordinate technical support, guidance, and training to service technicians. + Strong skills for conflict resolution, problem solving, and prioritization among technicians, peers, leadership, customers, etc. + Champion of change initiatives across the enterprise. Coaching and Mentorship of newer team members to help ensure compliance to systems and processes. + Perform prescribed, routine maintenance procedures on supermarket refrigeration system and self-contained temperature-controlled merchandisers. + Enough system knowledge to match customer needs with potential sales opportunities and ability to complete rapid/accurate diagnosis. + Manage truck inventory. Orders, receives, bills out and maintains parts responsibly with a minimum of waste. Manages assigned vehicle within all company guidelines. Maintains a clean vehicle, performs required maintenance on time. + Complete necessary documents and electronic communication in a thorough, accurate, professional and timely manner. Demonstrate the ability to utilize hand-held device to complete necessary paperwork and invoicing requirements. + Ability to systematically utilize mirror and flashlight to check all joints, install PVC drain pipe with minimal supervision, set and trim cases, install and adjust glass doors and frames, use temperature sensors, use brazing and soldering techniques, and determine proper coil layout in complex boxes. + Accurately identify pipe size and fittings by sight, perform system refrigerant and oil conversions and test oil during conversion and electric weld a variety of metals and joint types. + Identify, troubleshoot, and correctly size thermostatic expansion valves. + Working knowledge of pressure regulators as they pertain to pressurized gases, refrigerant flow controls, TEV troubleshooting and replacement, and tracing complex schematic diagrams. + Demonstrate understanding of low/high pressure oil systems, split condensing/low ambient controls, refrigerated equipment startup, EMS controls, CO2 refrigeration, new retail store refrigeration startup, air flow characteristics and testing, motor VFD's, all system defrost types, recovery setup, torch setup, compressor operating parameters, conventional refrigeration system layout, and parallel rack system layout, and advanced wiring diagrams. + Demonstrate a working knowledge of gauge, scale, recovery, ECM, shaded pole, PSC, three phase motors, compressor operating parameters, oil differential pressure valves and oil level controls, . + Detect and repair leaks on conventional systems and parallel racks, solder with copper-to-brass and copper to steel, conduct compressor diagnosis and replacements, troubleshoot and repair more complex service calls, check/adjust oil management system and compressor oil level control. + Serve as a mentor to other technicians and lead HVAC/R PM programs. + Additional responsibilities as assigned. **Qualifications** **Formal Education Requirement:** **Required Level:** High School Diploma/GED **Preferred level:** HVAC-R Technical School Degree **Minimum Years of Experience Necessary:** + External Candidates: 7 years in the field or 5 years with Certification from a Technical School + Internal Candidates: 3 years as a Certified Technician w/ completion of OJT & Skills Assessment **Additional Information:** + Must have a Valid Driver's License and maintain a safe driving record accordance with the Fleet Policy. + Must be physically able to walk distances, bench and crouch, climb ladders, work at high elevations and lift/carry objects up to fifty pounds, repetitively and for an external period. + Must have excellent verbal and written communication skills, detail orientated and highly motivated. + Must have strong mechanical aptitude. + Must be able to work nights and/or weekends as required. + Working knowledge of basic refrigeration and/or knowledge of commercial refrigeration and HVAC is preferred. + Must have strong leadership skills, communication skills, and business acumen. + EPA 608 Universal Certification. + Superior decision-making ability and paperwork skills. + Able to schedule work for other technicians. + Able to correctly teach all the previously listed items. **Benefits:** + Health, Dental, and Vision Insurance + 401k with Company Matching Contribution + Discretionary 401k Company Contribution + Tuition Reimbursement Program + Life/Disability Insurance + Maternity and Paternity Leave + Panasonic Employee Discounts + 10 Days Paid Vacation and 12 Company Holidays + Employee Assistance Program + And more The salary range of $46.18 - $69.26 per hour is just one component of Hussmann's total package. Actual compensation varies depending on the individual's knowledge, skills, experience and location. This role may be eligible for discretionary bonuses and incentives. *The minimum hourly wage for this role will be the greater of the posted range, or minimum wage for the location where the employee will be working, subject to local minimum wage requirements. **About Hussmann** For over a century, Hussmann Corporation has been a global leader in commercial refrigeration equipment - delivering solutions that meet the demands of the modern food retailing industry. Headquartered in St. Louis, MO, Hussmann offers a diverse range of products and connected solutions designed to enhance operational efficiency, optimize visibility of merchandise, and keep food fresh. With a nationwide network of skilled technicians, Hussmann goes beyond manufacturing - a trusted partner, relentlessly driving customer success. For more information about Hussmann, please visit **************** . Hussmann is a subsidiary of Panasonic USA. _Hussmann is proudly committed to creating an inclusive environment. All qualified applicants will receive consideration for employment without regard to veteran status, disability, age, race, color, religion, sex, national origin, genetics, medical condition, or any other characteristic protected by law._ REQ-153243

JLL (NYSE: JLL) is a leading professional services firm that specializes in real estate and investment management. A Fortune 500 company, JLL helps real estate owners, occupiers and investors achieve their business ambitions. In 2016, JLL had revenue of $6.8 billion and fee revenue of $5.8 billion and, on behalf of clients, managed 4.4 billion square feet, or 409 million square meters, and completed sales acquisitions and finance transactions of approximately $145 billion. At the end of the second quarter of 2017, JLL had nearly 300 corporate offices, operations in over 80 countries and a global workforce of more than 80,000. As of June 30, 2017, LaSalle Investment Management had $57.6 billion of real estate under asset management. JLL is the brand name, and a registered trademark, of Jones Lang LaSalle Incorporated. For further information, visit ************ Job Description The Site Regulated Services Lead/Quality Technician will have a primary focus on overseeing select site services which require additional oversight due to the regulated environment, including but not exclusive of GMP cleaning and pest control. The person in the role will strive toward innovation, assist in lowering cost of delivery and work with suppliers to integrate the service into operations while dramatically enhancing the customer experience. The Regulated Services Lead will collaborate with Quality Assurance and the client to ensure effective participation in and adherence to quality programs. They will drive towards a higher level of cleanliness as well as achieve minimum scoring metrics as stipulated in both Client and Vendor contracts. The candidate will have a proven career history of successfully managing change and GMP/Quality experience. This position reports directly to the Site Facility Manager. ESSENTIAL FUNCTIONS Understand and ensure compliance in GMP space Customer Focus: Be a true innovator and genuine service-oriented individual to continuously monitor established quality procedures and resolve internal quality issues and customer complaints concerning product and or service dissatisfaction. Communication: Directly interface, both verbally and written, with client vendors, and JLL Management Compliance: Stay current with all Client, Federal and State regulations/codes, comply with specifications, and ensure standards are met. Support Quality Assurance to include training, assigning tasks, performance appraisals, conducting investigations, assisting with CAPAs, and monitor procedures to ensure processes are completed in an efficient and safe manner, and within the scope of policies and procedures. Perform/support audits and prepare SOP's and training materials. Provides information to Vendors, Facilities staff and Service Providers as required to ensure that quality assurance expectations are communicated, understood and followed. Inspections: Participate in the creation and implementation of inspections and other quality practices and procedures.. These inspections should serve as an assurance of quality as measured by client surveys. Provide leadership and direction to advance service quality and enhance the client partnership to continuously improve operations and influence the behavior of all employees. Supplier Performance Management: Deliver high quality, creative, and cost-effective solutions. Monitor work requests to trend vendor performance. Raise the bar in vendor quality and service while reducing overall costs. Work with IFM managers to hold vendors accountable for delivering high quality service per contract expectations, partnering with vendors to continuously improve service quality and improvement plans, and resolve/troubleshoot service issues at the site level. Analytical capability: Analyze trends and utilize data to anticipate and proactively address issues in the environment. Financial Acumen: Challenge year-over-year cost increases and proactively identify ways to reduce “process waste” and costs. Qualifications EDUCATION AND EXPERIENCE Bachelor's degree in Engineering, Mathematics, Science or another relevant field is desired but not required; experience in lieu of degree will be considered. 5 years of GMP or ISO 9000 experience in manufacturing. Experience in pharmaceutical manufacturing preferred. Must have proven, successful GMP or Quality Compliance/Assurance experience working with vendors performing services in GMP space GMP PEST CONTROL PROGRAM Proven capabilities on addressing and remediating pest sightings and investigations in a GMP Manufacturing Facility. Ability to establish rationales on Pest Control Best Practices. Ability to prepare and analyze Pest Control Trend Reports, subject to Regulatory Agency review. Experience in auditing GMP Pest Control Programs. Some knowledge in entomology and common insect behavior. GMP | CLEAN ROOM JANITORIAL AND SANITIZATION PROGRAMS Strong Knowledge of Environmental Controls of GMP Clean Rooms. Strong understanding of Regulatory Expectations. Ability to recommend, frequency and propose recommended dilutions of cleaning detergents for specific needs and situations. Develop cleaning procedures, work instructions and log forms in compliance with regulatory expectations. Train on Cleaning Methods and Procedures. Proven capabilities on addressing and remediating investigations related to Environmental Monitoring excursions as it related to a cleaning/disinfection programs. Ability to recognize when a GMP Change Control is required when proposing new cleaning methods, detergents and consumables. KNOWLEDGE, SKILLS, AND ABILITIES Must possess strong interpersonal skills with the ability to build rapport quickly Knowledge of Quality Engineering techniques, CMMS systems, and Quality Management Systems Exhibit excellent written and verbal communication skills Ability to analyze reports for the purpose of ensuring compliance with scope of work Excellent PC skills: proficient in all MS applications, especially Excel, Word, PowerPoint, Visio Speak, read and write fluent Englis Additional Information All your information will be kept confidential according to EEO guidelines.

Perform repairs on various products. Duties will include investigation of customer complaints, troubleshooting/repair of failures to board level/sub-assembly and documentation of repairs in ERP system. Essential Functions Work within limits of prescribed procedures to ensure accurate completion of unit repair Document repairs made and parts used in our ERP system Troubleshoot problems to board level or sub-assembly to determine root cause of failure Perform mechanical and software upgrades Collaborate with QA Engineers as required on details of complaint investigation Ability to efficiently transition between product lines Required/Preferred Education and Experience Technical High School or College Level technical training preferred 3+ years of technical troubleshooting/repair experience preferred Knowledge, Skills and Abilities Computer literate, familiar with MS Windows, Word, Excel, Etc. Read and understand SOPs and work instructions Read and understand diagnostic data Familiarity with test equipment (e.g. patient simulators, oscilloscopes, signal generators, and other test equipment) Navigate ERP systems effectively

Site: The Brigham and Women's Hospital, Inc. Mass General Brigham relies on a wide range of professionals, including doctors, nurses, business people, tech experts, researchers, and systems analysts to advance our mission. As a not-for-profit, we support patient care, research, teaching, and community service, striving to provide exceptional care. We believe that high-performing teams drive groundbreaking medical discoveries and invite all applicants to join us and experience what it means to be part of Mass General Brigham. The cardiac cath lab physician assistant is a licensed provider who will be responsible for all aspects of pre, intra, and post procedure care of interventional cardiology patients. This includes, but is not limited to, pre-procedure assessment, informed consent, sedation assessment, assisting with procedures, post-procedure management, and discharge education. The PA will first assist in all types of procedures performed in the cardiac cath lab and will be comfortable with equipment required for the procedures. The PA will act as the responding clinician for patients on the PA Cath Service with responsibilities including admission H&P, daily rounds, progress notes, and discharge summaries. The PA must have knowledge of the most common diagnoses admitted to the Interventional Cardiology service, demonstrate competency to effectively diagnose, formulate an appropriate treatment plan, and implement the plan in conjunction with the attending physician. The physician assistant will be responsible for completing and maintaining procedural sedation training annually and completing fluoroscopic training and certification within 18 months of hire. While the PA can expect a relatively predictable work schedule, schedule variations may occur to cover clinical needs as they become apparent to the department. The position will include weekend and holiday coverage planned in advance. PA may be asked to take call, pick up additional shifts, work variable hours, and/or provide backup coverage as needed. Job Summary Summary: The Physician Assistant (PA) is a licensed provider. The PA is responsible for the assessment and management of various populations of patients, medical and/or surgical, including diagnostic and therapeutic interventions, development of appropriate plans of care and ongoing evaluation. Does this position require Patient Care? Yes Essential Functions: Provides direct care, counseling, and teaching to a designated patient population in the ambulatory, inpatient, operative, and/or procedural setting. * Performs complete histories and physical examinations. * Orders, interprets, and evaluates appropriate laboratory and diagnostic tests. * Develops appropriate plans of care and follow-up based on the outcomes of diagnostic, laboratory, and physical examination findings. * Orders medications and writes prescriptions according to organizational and regulatory policies and procedures. * Consistently provides high quality and timely documentation including admission and progress notes, procedure notes, operative notes and discharge summaries. * Performs bedside procedures as are appropriate to the patient population. Qualifications Education Master's Degree Physician Assistant required Can this role accept experience in lieu of a degree? No Licenses and Credentials Physician Assistant [State License] - required Experience Experience as a licensed Physician Assistant preferred Knowledge, Skills and Abilities * Skilled in taking medical histories to assess medical condition and interpret findings. * Ability to maintain quality control standards. * Ability to react calmly and effectively in emergency situations. * Ability to interpret, adapt and apply guidelines and procedures. * Ability to communicate clearly and establish/maintain effective working relationships with patients, medical staff and the public. Additional Job Details (if applicable) Remote Type Onsite Work Location 75 Francis Street Scheduled Weekly Hours 40 Employee Type Regular Work Shift Rotating (United States of America) Pay Range $120,390.40 - $170,456.00/Annual Grade 7 At Mass General Brigham, we believe in recognizing and rewarding the unique value each team member brings to our organization. Our approach to determining base pay is comprehensive, and any offer extended will take into account your skills, relevant experience if applicable, education, certifications and other essential factors. The base pay information provided offers an estimate based on the minimum job qualifications; however, it does not encompass all elements contributing to your total compensation package. In addition to competitive base pay, we offer comprehensive benefits, career advancement opportunities, differentials, premiums and bonuses as applicable and recognition programs designed to celebrate your contributions and support your professional growth. We invite you to apply, and our Talent Acquisition team will provide an overview of your potential compensation and benefits package. EEO Statement: 2200 The Brigham and Women's Hospital, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, national origin, sex, age, gender identity, disability, sexual orientation, military service, genetic information, and/or other status protected under law. We will ensure that all individuals with a disability are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veteran's Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants who require accommodation in the job application process may contact Human Resources at **************. Mass General Brigham Competency Framework At Mass General Brigham, our competency framework defines what effective leadership "looks like" by specifying which behaviors are most critical for successful performance at each job level. The framework is comprised of ten competencies (half People-Focused, half Performance-Focused) and are defined by observable and measurable skills and behaviors that contribute to workplace effectiveness and career success. These competencies are used to evaluate performance, make hiring decisions, identify development needs, mobilize employees across our system, and establish a strong talent pipeline.

Join one of the most established, respected and well-known BMW Motorrad Dealerships in the country at MAX BMW Motorcycles. At the Northeast's only exclusive BMW Motorrad Service Department, you will be applying your skill and experience on leading BMW Motorrad product technology routinely and growing your career with access to the best manufacturer training in the industry. This Dealership was started by Technicians, so the business leaders understand how important their technicians are to the success of the business firsthand. As such, all Technicians are routinely provided OEM training to keep them informed of new product technology and efficient, successful “fix-it-right the first time every time” processes. The Team at MAX BMW is focused and committed to working together for success. As a result of growth and the need for additional Service Technicians to service the ever-popular BMW Motorrad product lineup, MAX BMW is seeking multiple Service Technicians to grow with the Team in the following locations. Location(s) North Hampton, NH Job Description As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive, Heavy Equipment / Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High school diploma or equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • 18 years of age or older • Own & maintain a valid driver's license • Must perform duties and responsibilities in a safe manner • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, drug test, and maintenance of a valid driver's license

* One Time $8,500.00 Sign on Bonus* Schedule: 9:00AM-5:30PM Under minimal supervision and following established procedures and methods, maintains inventory of complex, delicate endoscopic equipment and related component parts. Monitors and/or performs specialized cleaning and decontamination and inspects, assembles and prepares equipment for surgical cases. Performs and/or arranges maintenance and repair services and serves as a resource on equipment use and operation. Tracks and maintains inventory, reordering supplies, monitoring purchase and repair costs and assisting in selection and introduction of new supplies and equipment. Key Responsibilities: * Ensures availability of sterile endoscopic equipment for surgeries, including retrieval, assembly, and specialized sterilization to meet surgical schedules. * Acts as a resource for operating endoscopic and audiovisual equipment; performs inspections, routine maintenance, and troubleshooting. * Coordinates equipment readiness for procedures by providing substitutions and responding to technical assistance requests. * Manages ordering and restocking of endoscopic supplies based on par levels, including receiving, verifying, and distributing inventory. * Oversees proper storage and rotation of supplies, ensuring labeling and packaging meet standards. * Maintains detailed records of inventory, purchasing, equipment repairs, and expenses; reconciles budget variances and supports budget planning. * Processes billing invoices and payment requisitions while addressing related inquiries and vendor issues. * Contributes to evaluation and implementation of new equipment and supplies; serves on relevant committees or project teams. Minimum Qualifications Education: * High School/GED Licensure/ Certifications: * Certified Registered Central Service Technician (CRCST) OR Certified Sterile Processing and Distribution Technician (CSPDT) required * Required to obtain: Certified Endoscope Reprocessor (CER) within one year of hire The posted pay range is Boston Children's reasonable and good-faith expectation for this pay at the time of posting. Any base pay offer provided depends on skills, experience, education, certifications, and a variety of other job-related factors. Base pay is one part of a comprehensive benefits package that includes flexible schedules, affordable health, vision and dental insurance, child care and student loan subsidies, generous levels of time off, 403(b) Retirement Savings plan, Pension, Tuition and certain License and Certification Reimbursement, cell phone plan discounts and discounted rates on T-passes. Experience the benefits of passion and teamwork.