Repair technician jobs in Cambridge, MA - 2,366 jobs

Manufacturing Maintenance Technician Duration: 12 Months Job Type: Temporary Assignment Work Type: Onsite Shift: Day Shift Pay Range: $20.00 - $28.00 Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients worldwide. The job opportunity is for one of our clients specializing in biotechnology product development services. Our client is dedicated to supplying laboratory equipment, chemicals, supplies, and services essential in healthcare, scientific research, safety, and education. As the global leader in serving the field of science, our client boasts an annual revenue of around $40 billion with a mission to empower customers to make the world healthier, cleaner, and safer. Our client's global team is committed to delivering an unparalleled blend of cutting-edge technologies, convenient procurement options, and pharmaceutical services under their industry-leading brands. Summary: The Manufacturing Maintenance Technician II serves as a journeyman-level technician responsible for maintaining, troubleshooting, and improving automated production equipment. This role provides electrical, mechanical, and controls support while ensuring equipment safety, reliability, and optimal production performance in a manufacturing environment. Key Responsibilities: Ensure production equipment meets all safety regulations and industry standards. Identify and correct unsafe conditions involving electrical safety, guarding, interlocks, and emergency stops. Complete safety review checklists for new equipment and major process changes. Perform all tasks in compliance with site safety procedures (LOTO, hot work, confined space, etc.). Troubleshoot and repair automated production equipment to minimize downtime. Ensure spare parts are identified, stocked, and available for equipment support. Perform scheduled preventive maintenance and adjust PM requirements as needed. Train and mentor production associates on proper equipment operation and care. Assist in updating SOPs related to equipment use and processes. Identify and implement cost, quality, and reliability improvements. Support continuous improvement initiatives such as PPI and Lean activities. Ability to troubleshoot automated equipment, electronics, sensors, motors, servos, and pneumatics. Strong mechanical skills including disassembly, repair, and reassembly of complex equipment. Proficient use of hand and power tools. Working knowledge of mechanical, pneumatic, lubrication, electrical systems, and industrial automation. Understanding of general construction, repair, and facility maintenance. Knowledgeable and proficient in Good Documentation Practices (GDP). Proficient with PC applications including Outlook, Word, and Excel. Ability to use CMMS and inventory management software. Ability to communicate clearly with Work Centers, teams, and contractors professionally. Strong verbal and written communication skills for effective interpersonal interactions. Ability to work in diverse environments including office, laboratory, hazardous chemical production areas, clean rooms, general production floors, warehouses, outdoors, rooftops, mechanical spaces, and interstitial spaces. Must be able to climb ladders, work at elevated heights, regularly lift up to 50 lbs, and move 55-gallon drums using wheeled dollies. Must be able to work on-call when required. Required Skills High School Diploma required; Associate's or Vocational Degree in a mechanical or electrical discipline preferred. Associate's degree or vocational training in mechanical or electrical fields. Technical certifications in automation, controls, or industrial maintenance are a plus. 1-4 years of mechanical and/or electrical technical experience, or a combination of relevant education and experience. Experience supporting Lean Manufacturing or PPI initiatives. Experience writing or improving SOPs and technical documentation. Advanced troubleshooting of servos, PLCs, and automated systems. Experience working with automated production equipment in a manufacturing environment. TekWissen Group is an equal opportunity employer supporting workforce diversity.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Pinehurst, NC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled MOV Technician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Perform MOV refurbish activities including preventative and corrective maintenance, actuator regrease, electrical equipment removal/installation, valve position limit switch setup on Motor Operator Actuators (Limitorque, Rotork, EIM etc.). Qualification, education, and experience requirements: Must have 3 years' experience in MOV refurbishment. Completion of a Motor operated valve training course and pass MOV TPE. Must have a high school diploma or equivalent. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

Experience level: All Experience Level Experience required: 3 Years Education level: High school or equivalent Job function: Manufacturing Industry: Aviation & Aerospace Visa sponsorship eligibility: No We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay Depend on Experience. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

IPG Photonics is the world leader in high-power fiber lasers for industrial welding, cutting, and marking applications. We are seeking a dependable and detail-oriented Technician - Service to join our service depot team. In this role, you will perform repairs, testing, and maintenance on laser systems and components under the guidance of senior staff. This is an excellent opportunity for a technician to grow their hands-on skills and contribute to high-impact laser applications. JOB FUNCTIONS Duties/Responsibilities: * Perform repairs, testing, and maintenance of laser systems and subsystems in the service depot. * Follow detailed work instructions and repair documentation to complete service tasks accurately. * Assist in troubleshooting of mechanical, electronic, and optical components under supervision. * Prepare systems and components for shipment, including inspection and proper packaging. * Enter service data into ERP and CRM systems to document completed repairs. * Collaborate with senior technicians on complex repairs and escalations. * Participate in ongoing training to build skill sets across mechanical, electrical, and optical systems. * Maintain a clean, organized, and safe work area in alignment with 5S principles. * Support continuous improvement efforts by identifying minor process improvements. Additional Responsibilities: * Ability to interpret electrical drawings. * Experience with industrial lasers, accessories, and related diagnostic equipment. * Excellent electrical/electronic troubleshooting skills with high and low-voltage equipment. * Maintain a safe, clean, and organized work environment. QUALIFICATIONS Education: * Associate or Technical degree preferred, but extensive experience in a similar hand-on experience will be considered. Experience: * 2-4 years of experience in industrial laser systems, cutting, welding, or marking applications. * Experience working with laser, electrical, or electro-mechanical systems is a plus. * Experience with 5S, Lean, and continuous improvement methodologies is a strong plus. Required Abilities: * Proficient mechanical aptitude and basic troubleshooting ability. * Strong attention to detail and accuracy in documentation. * Eagerness to learn from senior technicians and grow within the team. * Basic familiarity with CRM or ERP systems is a plus. * Ability to follow technical instructions and safety procedures consistently. Physical Requirements: * Prolonged periods of standing and working in a repair environment. * Extended periods of sitting at a desk using a computer and test equipment. * Ability to lift 15 pounds regularly and up to 50 pounds occasionally. * Ability to navigate the organization's facilities and travel as needed. * Occasional travel (up to 10-15%) for field repairs or support projects. Education: * Associate or Technical degree preferred, but extensive experience in a similar hand-on experience will be considered. Experience: * 2-4 of experience in industrial laser systems, cutting, welding, marking applications or related experience (similar electronics experience will be considered). * Experience working with laser, electrical, or electro-mechanical systems is a plus. * Experience with 5S, Lean, and continuous improvement methodologies is a strong plus. Required Abilities: * Proficient mechanical aptitude and basic troubleshooting ability. * Strong attention to detail and accuracy in documentation. * Eagerness to learn from senior technicians and grow within the team. * Basic familiarity with CRM or ERP systems is a plus. * Ability to follow technical instructions and safety procedures consistently. Physical Requirements: * Prolonged periods of standing and working in a repair environment. * Extended periods of sitting at a desk using a computer and test equipment. * Ability to lift 15 pounds regularly and up to 50 pounds occasionally. * Ability to navigate the organization's facilities and travel as needed. * Occasional travel (up to 10-15%) for field repairs or support projects IND456 #ZR

We're looking for a Technical Lead to join our Product Engineering team at our HQ in Kendall Square. This is a fantastic opportunity to work with an amazing team and make a real and immediate impact for our members and users. What you'll be doing: Build and test features for a rapidly growing consumer-facing application. Take a lead role in steering architecture to scale technology and process to a high scale and quality. Work closely with stakeholders in various internal groups to help balance delivery speed and quality. Mentor and train junior developers to maximize team velocity. About you and your skills: Customer focused outlook on software design. 5+ years building out maintainable applications with modern programming languages such as Java and Javascript Experience building solutions for AWS (or other cloud services) Experience working with distributed systems (microservices) Experience with containers and container orchestration systems a plus! Benefits: We pay 100% of the cost of both your medical and dental premiums directly to the insurance companies Establish an HSA to cover any out-of-pocket expenses you may incur that are not covered by the insurance Employee parking/MBTA costs Host lots of fun all-company events Fully stocked kitchen

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role:Technology Lead - Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava Duration: Full TIme Location: Cranston, RI Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education • At least 4 years of experience with Information Technology Preferred • At least 4 years of Java development experience, ideally in a team lead role • Knowledge of architectural design patterns, performance tuning and functional designs. • At least 4 years of experience in Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava • Ability to develop functional, technical and user interface designs for an application that meets the defined requirements (business, system performance and standards) • At least 4 years of experience in specific coding concepts and/or languages, especially around modern application architectures. • At least 2 years experience with web applications that use responsive design to better support mobile browsers. • AT least 2 years of experience in highly-secured online environments that use n-tier designs and extensive firewalling to enhance security. • At least 4 years experience interfacing with back-end applications using MQ, SOAP, RESTful services, and JSON. • At least 2 years of experience in multi data center physical implementation models for scalability and resilience. • Experience with Spring Boot, Netflix OSS, HATEOAS, Gradle/Maven is a plus. ReST/Resource Oriented Design, Wiremock, JUnit/Mockito/Assert4J, AMQP/JMS/MQ, Functional Reactive/ Lambdas/Streams, Agile/Jira,Jenkins/Cobertura/PMD/FindBugs are good to have. • Experience and desire to work in a Global delivery environment • Communication and Analytical skills Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Additional Information All your information will be kept confidential according to EEO guidelines.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. When surgical instruments are sharpened and working properly, surgeons can focus on providing the best care for their patients. STERIS offers a variety of repair solutions to meet the needs of the Customer including onsite mobile repair services, in house repair lab services, or one of five national repair centers. You do not have to have previous instrument repair experience to be considered. This is an entry level job - we will train you! In this position, you will perform surgical instrument inspection, repair, and refurbishment in an in-house repair lab at Brigham & Women's Hospital. This position may require occasional overnight travel. This role requires occasional travel by driving a company vehicle. If offered this position, STERIS will run a 7 year driving record check, as part of our onboarding process. Please Note: The schedule for this position is Monday - Friday from 7am to 3:30pm. What You Will Do As a Repair Tech Perform basic to intermediate inspection and repairs on surgical instrumentation using grinding wheels, buffing wheels, various hand and power tools, soldering, etc. Complexity of repairs and level of intricacy will vary. You will work in the field on a mobile repair truck, inside a repair lab or inside a hospital, based on the needs of the Customer within the assigned territory. Provide invoicing and documentation based on business need. Provide support various locations within assigned territory depending on the service agreements, Customer needs, and staffing levels. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: Extensive hands-on training and development Career progression path with STERIS Instrument Management Services and growth opportunities in other parts of STERIS Competitive pay Overtime opportunity Annual merit review and incentive plans Uniforms and all necessary tools provided Business travel and all related expenses paid Medical, vision, prescription, dental and life insurance 401(k) with a company match Paid time off that accrues from day one and paid holidays Tuition assistance Opportunities for advancement The Experience, Skills, and Abilities Needed • High school diploma or GED required • 2+ years of work experience, including at least 1 year of relevant experience*, or 1 year of experience at STERIS. All experience must be verifiable. • Must be able to meet flexible schedules with early/late hours and occasional overnight/out of state travel, based on Customer and business needs. • Must be able to pass a DOT medical/ physical exam and comply with all DOT regulations. • Must have a valid driver's license with an acceptable driving record (CDL not required) and maintain required vaccines. • Ability to drive DOT regulated vehicle and conduct basic box truck safety checks. • Must be at least 21 years old to meet the FMCSA age requirement for commercial interstate driving. • Must be able to lift up to 25 pounds at times and push instrument carts ranging from 10-150 pounds at times. • Must be able to be compliant with hospital/customer credentialing requirements *What is relevant work experience? • Hands-on repair, assembly, or product testing and use of small hand tools is a plus. Examples are small engine repair, cell phone and electronics repair, testing, or re-builds, carpentry, circuit board assembly and repair, sterile processing, industrial sewing, and jewelry repair. Maintenance, construction, welding, fabrication, and automotive repair can also be relevant. #LI-AC1 Pay range for this opportunity is $24.00 - $27.00/hour. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

Temp Cable Technician Smithfield, RI Running, terminating, and testing Cat-6A cable. Installing J-Hooks, punch-downs, etc. Mult-floor office buildings in Smithfield, RI and surrounding area. 6-8 weeks of work For the right candidate this could become an ongoing assignment. NIGHT WORK (6 PM - 4:30 AM). Must be willing/able to work overtime. Candidates must have their own hand tools (Punch down tool, crimper, wire stripper, snips, etc.) PPE gear required.

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $50.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Under general supervision, this individual will perform diagnosis, troubleshooting and repair or replacement of all mechanical assemblies used in FLIR Thermal Imaging Systems products. This individual will help identify and select the appropriate tooling, processes and procedures to complete any repairs, refurbishment, test and validation of work performed. Accurate and appropriate performance of these tasks will result in the successful repair and maintenance of these products **Primary Duties & Responsibilities:** 1. Conduct routine diagnosis, repair, refurbishment, service and support of mechanical assemblies, sub-assemblies, motors, bearings and wiring harnesses for all FLIR Imaging Systems' products. 2. Assist in developing standard repair and maintenance procedures which will be documented to company and ISO standards. 3. Provide technical support in the development of customer service spare parts inventory, including establishing requirements for content and quantity. 4. Provide accurate and timely repair estimates that include labor and material requirements. 5. Support the servicing of Imaging Systems demonstration equipment. 6. Perform other job related duties as required. 7. Work as a member of the service team to meet department goals related to repair turn times and customer satisfaction. **Job Qualifications:** + Requires a minimum of 1-2 years prior work/schooling experience in a related electronics field. + Degree or certificate in electronics or equivalent required. + Strong electro-mechanical troubleshooting skills, proficient with using electronic test equipment required such as digital voltmeters to perform continuity of system wiring. + A good working knowledge of computers, computer peripherals and programs such as SAP. + Must be able to read Schematics and wiring diagrams. + Must be capable of lifting a minimum of 45 pounds unassisted. + Must be able to solder 26Awg wires and 402 Smt components. + Preferred candidate will have 1-3 years prior experience servicing thermal imaging equipment. Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. \#FLIR **Salary Range:** $49,300.00-$65,700.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Responsive recruiter Benefits: Competitive salary Dental insurance Health insurance Paid time off Training & development Vision insurance 401(k) matching The Fiberglass and Gelcoat Repair Technician is responsible for performing high-quality repairs on fiberglass boat hulls and structures. This role requires a keen eye for detail, strong technical skills, and the ability to work efficiently to ensure customer satisfaction and safety. JOB DUTIES/RESPONSIBILITIES: Repair and Maintenance: Perform repairs on fiberglass boat hulls, decks, and other structures, including gelcoat repairs, structural repairs, and cosmetic refinishing. Inspection and Diagnosis: Inspect damaged boats to determine the extent of damage and the best repair methods. Use diagnostic tools and techniques to identify issues accurately. Preparation: Prepare surfaces for repair by cleaning, sanding, and masking as necessary. Ensure all surfaces are properly prepped to achieve a high-quality finish. Application: Apply fiberglass matting, resin, and gelcoat to repair damaged areas. Ensure proper curing and finishing techniques are used to match the original appearance and strength. Quality Control: Conduct thorough inspections of completed repairs to ensure they meet quality standards and customer expectations. Address any issues promptly. Documentation: Maintain accurate records of repairs, including work orders, parts used, and time spent on each job. Ensure all documentation is complete and up-to-date. Safety Compliance: Follow all safety protocols and guidelines to ensure a safe working environment. Use personal protective equipment (PPE) as required. Team Collaboration: Work closely with other technicians, service advisors, and management to ensure efficient workflow and high-quality service delivery. Perform related tasks such as shrink wrapping, detailing, pressure washing, bottom painting, bottom scraping, block and stand vessels, and vessel maintenance. REQUIREMENTS: Experience: Minimum of 2 years of experience in fiberglass repair and gelcoat, preferably in a marine environment. Skills: Proficient in fiberglass repair techniques, including gelcoat application, sanding, and finishing. Strong attention to detail and craftsmanship. Knowledge: Understanding of marine safety standards and repair procedures. Familiarity with various types of fiberglass materials and resins. Physical Requirements: Ability to lift heavy objects, stand for extended periods, ascend/descend a ladder and work in various weather conditions. Manual dexterity and hand-eye coordination are essential. Communication: Excellent verbal and written communication skills. Ability to explain technical information to non-technical customers. Certifications: Relevant certifications in fiberglass repair or marine technology are a plus. Work is performed in a workshop environment with exposure to dust, fumes, and noise. May require occasional overtime or weekend work to meet customer demands. Compensation: $26.00 - $35.00 per hour Freedom Boat Club of Greater Boston & Cape Cod Freedom Boat Club of Ocean and Monmouth Counties, New Jersey We are a Freedom Boat Club franchise owned and operated by the Carrick Group LLC/M&M Jersey Marine LLC. We operate 20 Massachusetts club locations and nine New Jersey (north Jersey shore) club locations with our operations center located in Plymouth, MA. Freedom Boat Club is the world's oldest and largest membership boat club with over 30 years of experience offering members access to over 400 locations in the U.S., Canada and Europe. We take care of the maintenance, cleaning, repair, insurance and storage. The fleet includes bowriders, pontoons, and center console fishing boats. ******************************** We work in this field because it's fun! Solitude. Fishing. Adventure. Sandbars. Sightseeing. Watersports. Family Time. This is why we do it. We do it for the fun. We do it for the firsts. We do it because we love to see the smiles, the pictures, the fish, and the accomplishment. We truly get joy from witnessing the joy we bring to others. Some would say we work so you can play. While we don't disagree, we don't always feel like what we do is work. We're pretty committed to the concept of successful and casual. Suits and ties have no place here, we traded those in long ago for boat shoes and sunscreen.

Job Description About the Role: The Lead Service Technician plays a critical role in ensuring the efficient operation and maintenance of equipment and systems within the organization. This position is responsible for leading a team of service technicians, providing technical expertise, and ensuring that all service tasks are completed to the highest standards. The Lead Service Tech will coordinate service schedules, troubleshoot complex issues, and implement solutions that minimize downtime and enhance system performance. This role requires a proactive approach to identifying potential problems and mentoring junior technicians to develop their skills. Ultimately, the Lead Service Technician ensures customer satisfaction through timely, effective service delivery and continuous improvement of service processes. Minimum Qualifications: High school diploma or equivalent; technical certification or associate degree in a relevant field preferred. Minimum of 5 years of experience in a service technician role with demonstrated technical proficiency. Proven experience leading or supervising a team in a technical or service environment. Strong knowledge of mechanical, electrical, and electronic systems relevant to the industry. Valid driver's license and ability to travel to customer sites as required. Preferred Qualifications: Certification in specialized equipment or systems relevant to the company's service offerings. Experience with computerized maintenance management systems (CMMS) or similar software. Advanced troubleshooting and diagnostic skills using modern tools and technology. Formal leadership or management training. Experience working in a customer-facing role with strong communication skills. Responsibilities: Lead and supervise a team of service technicians in daily operations and service calls. Diagnose, troubleshoot, and repair complex mechanical, electrical, or electronic equipment issues. Develop and implement preventive maintenance plans to reduce equipment failures and downtime. Coordinate service schedules and manage resources to meet customer and organizational needs. Provide technical training and mentorship to junior technicians to enhance team capabilities. Maintain accurate service records, reports, and documentation in compliance with company policies. Collaborate with other departments to improve service processes and customer satisfaction. Ensure compliance with safety regulations and company standards during all service activities. Skills: The Lead Service Technician utilizes strong technical skills daily to diagnose and resolve complex equipment issues efficiently, ensuring minimal disruption to operations. Leadership and communication skills are essential for managing the service team, coordinating schedules, and providing clear guidance and training to junior technicians. Problem-solving abilities are applied continuously to develop preventive maintenance strategies and improve service processes. Organizational skills are critical for maintaining accurate records and managing multiple service requests simultaneously. Additionally, proficiency with diagnostic tools and software enhances the technician's ability to deliver timely and effective solutions, contributing to overall customer satisfaction.

Perform repairs on various products. Duties will include investigation of customer complaints, troubleshooting/repair of failures to board level/sub-assembly and documentation of repairs in ERP system. Essential Functions Work within limits of prescribed procedures to ensure accurate completion of unit repair Document repairs made and parts used in our ERP system Troubleshoot problems to board level or sub-assembly to determine root cause of failure Perform mechanical and software upgrades Collaborate with QA Engineers as required on details of complaint investigation Ability to efficiently transition between product lines Required/Preferred Education and Experience Technical High School or College Level technical training preferred 3+ years of technical troubleshooting/repair experience preferred Knowledge, Skills and Abilities Computer literate, familiar with MS Windows, Word, Excel, Etc. Read and understand SOPs and work instructions Read and understand diagnostic data Familiarity with test equipment (e.g. patient simulators, oscilloscopes, signal generators, and other test equipment) Navigate ERP systems effectively

**Are you motivated and eager to grow your career in refrigeration?** Hussmann's team of Technicians maintain, diagnose, and repair HVAC/R in supermarkets, convenience stores, cold storage facilities. Build your career with industry leaders since 1906. Join our team of hardworking, refrigeration experts and discover your potential. **Why Hussmann?** + Bi-annual bonuses based on performance + Paid training and access to online training videos + Paid drive time (including overtime) + 22 days paid off - 10 days of vacation, 12 company holidays + Company vehicle provided + On-the-job, hands-on training opportunities for Technicians, electric and mechanical theory, and model-based training + Sign-on bonus available **Responsibilities** Lead a team of service technicians based upon a specified geographic area or project/customer assignment to respond the customer's need for service and maintenance of equipment through maintenance, diagnosis and repair of refrigeration, heating & air-conditioning system commonly installed in supermarkets, convenient stores and cold storage facilities. + Development and maintenance of excellent customer relations. Fluent in applicable customer systems, business processes, administrative support, etc. + Actively pursuing personal development & supporting technician growth and development. Intrinsically involved with screening, interviewing, and hiring new technicians. + Under the direction of the Service Manager perform survey of new customer sites and assist in quoting service and maintenance. Assist with job quoting, staffing, estimating, understanding of project costing & drivers, etc. + Implement pertinent training and provide opportunities for ongoing professional development for technicians. + Coordinate technical support, guidance, and training to service technicians. + Strong skills for conflict resolution, problem solving, and prioritization among technicians, peers, leadership, customers, etc. + Champion of change initiatives across the enterprise. Coaching and Mentorship of newer team members to help ensure compliance to systems and processes. + Perform prescribed, routine maintenance procedures on supermarket refrigeration system and self-contained temperature-controlled merchandisers. + Enough system knowledge to match customer needs with potential sales opportunities and ability to complete rapid/accurate diagnosis. + Manage truck inventory. Orders, receives, bills out and maintains parts responsibly with a minimum of waste. Manages assigned vehicle within all company guidelines. Maintains a clean vehicle, performs required maintenance on time. + Complete necessary documents and electronic communication in a thorough, accurate, professional and timely manner. Demonstrate the ability to utilize hand-held device to complete necessary paperwork and invoicing requirements. + Ability to systematically utilize mirror and flashlight to check all joints, install PVC drain pipe with minimal supervision, set and trim cases, install and adjust glass doors and frames, use temperature sensors, use brazing and soldering techniques, and determine proper coil layout in complex boxes. + Accurately identify pipe size and fittings by sight, perform system refrigerant and oil conversions and test oil during conversion and electric weld a variety of metals and joint types. + Identify, troubleshoot, and correctly size thermostatic expansion valves. + Working knowledge of pressure regulators as they pertain to pressurized gases, refrigerant flow controls, TEV troubleshooting and replacement, and tracing complex schematic diagrams. + Demonstrate understanding of low/high pressure oil systems, split condensing/low ambient controls, refrigerated equipment startup, EMS controls, CO2 refrigeration, new retail store refrigeration startup, air flow characteristics and testing, motor VFD's, all system defrost types, recovery setup, torch setup, compressor operating parameters, conventional refrigeration system layout, and parallel rack system layout, and advanced wiring diagrams. + Demonstrate a working knowledge of gauge, scale, recovery, ECM, shaded pole, PSC, three phase motors, compressor operating parameters, oil differential pressure valves and oil level controls, . + Detect and repair leaks on conventional systems and parallel racks, solder with copper-to-brass and copper to steel, conduct compressor diagnosis and replacements, troubleshoot and repair more complex service calls, check/adjust oil management system and compressor oil level control. + Serve as a mentor to other technicians and lead HVAC/R PM programs. + Additional responsibilities as assigned. **Qualifications** **Formal Education Requirement:** **Required Level:** High School Diploma/GED **Preferred level:** HVAC-R Technical School Degree **Minimum Years of Experience Necessary:** + External Candidates: 7 years in the field or 5 years with Certification from a Technical School + Internal Candidates: 3 years as a Certified Technician w/ completion of OJT & Skills Assessment **Additional Information:** + Must have a Valid Driver's License and maintain a safe driving record accordance with the Fleet Policy. + Must be physically able to walk distances, bench and crouch, climb ladders, work at high elevations and lift/carry objects up to fifty pounds, repetitively and for an external period. + Must have excellent verbal and written communication skills, detail orientated and highly motivated. + Must have strong mechanical aptitude. + Must be able to work nights and/or weekends as required. + Working knowledge of basic refrigeration and/or knowledge of commercial refrigeration and HVAC is preferred. + Must have strong leadership skills, communication skills, and business acumen. + EPA 608 Universal Certification. + Superior decision-making ability and paperwork skills. + Able to schedule work for other technicians. + Able to correctly teach all the previously listed items. **Benefits:** + Health, Dental, and Vision Insurance + 401k with Company Matching Contribution + Discretionary 401k Company Contribution + Tuition Reimbursement Program + Life/Disability Insurance + Maternity and Paternity Leave + Panasonic Employee Discounts + 10 Days Paid Vacation and 12 Company Holidays + Employee Assistance Program + And more The salary range of $46.18 - $69.26 per hour is just one component of Hussmann's total package. Actual compensation varies depending on the individual's knowledge, skills, experience and location. This role may be eligible for discretionary bonuses and incentives. *The minimum hourly wage for this role will be the greater of the posted range, or minimum wage for the location where the employee will be working, subject to local minimum wage requirements. **About Hussmann** For over a century, Hussmann Corporation has been a global leader in commercial refrigeration equipment - delivering solutions that meet the demands of the modern food retailing industry. Headquartered in St. Louis, MO, Hussmann offers a diverse range of products and connected solutions designed to enhance operational efficiency, optimize visibility of merchandise, and keep food fresh. With a nationwide network of skilled technicians, Hussmann goes beyond manufacturing - a trusted partner, relentlessly driving customer success. For more information about Hussmann, please visit **************** . Hussmann is a subsidiary of Panasonic USA. _Hussmann is proudly committed to creating an inclusive environment. All qualified applicants will receive consideration for employment without regard to veteran status, disability, age, race, color, religion, sex, national origin, genetics, medical condition, or any other characteristic protected by law._ REQ-153243

JLL (NYSE: JLL) is a leading professional services firm that specializes in real estate and investment management. A Fortune 500 company, JLL helps real estate owners, occupiers and investors achieve their business ambitions. In 2016, JLL had revenue of $6.8 billion and fee revenue of $5.8 billion and, on behalf of clients, managed 4.4 billion square feet, or 409 million square meters, and completed sales acquisitions and finance transactions of approximately $145 billion. At the end of the second quarter of 2017, JLL had nearly 300 corporate offices, operations in over 80 countries and a global workforce of more than 80,000. As of June 30, 2017, LaSalle Investment Management had $57.6 billion of real estate under asset management. JLL is the brand name, and a registered trademark, of Jones Lang LaSalle Incorporated. For further information, visit ************ Job Description The Site Regulated Services Lead/Quality Technician will have a primary focus on overseeing select site services which require additional oversight due to the regulated environment, including but not exclusive of GMP cleaning and pest control. The person in the role will strive toward innovation, assist in lowering cost of delivery and work with suppliers to integrate the service into operations while dramatically enhancing the customer experience. The Regulated Services Lead will collaborate with Quality Assurance and the client to ensure effective participation in and adherence to quality programs. They will drive towards a higher level of cleanliness as well as achieve minimum scoring metrics as stipulated in both Client and Vendor contracts. The candidate will have a proven career history of successfully managing change and GMP/Quality experience. This position reports directly to the Site Facility Manager. ESSENTIAL FUNCTIONS Understand and ensure compliance in GMP space Customer Focus: Be a true innovator and genuine service-oriented individual to continuously monitor established quality procedures and resolve internal quality issues and customer complaints concerning product and or service dissatisfaction. Communication: Directly interface, both verbally and written, with client vendors, and JLL Management Compliance: Stay current with all Client, Federal and State regulations/codes, comply with specifications, and ensure standards are met. Support Quality Assurance to include training, assigning tasks, performance appraisals, conducting investigations, assisting with CAPAs, and monitor procedures to ensure processes are completed in an efficient and safe manner, and within the scope of policies and procedures. Perform/support audits and prepare SOP's and training materials. Provides information to Vendors, Facilities staff and Service Providers as required to ensure that quality assurance expectations are communicated, understood and followed. Inspections: Participate in the creation and implementation of inspections and other quality practices and procedures.. These inspections should serve as an assurance of quality as measured by client surveys. Provide leadership and direction to advance service quality and enhance the client partnership to continuously improve operations and influence the behavior of all employees. Supplier Performance Management: Deliver high quality, creative, and cost-effective solutions. Monitor work requests to trend vendor performance. Raise the bar in vendor quality and service while reducing overall costs. Work with IFM managers to hold vendors accountable for delivering high quality service per contract expectations, partnering with vendors to continuously improve service quality and improvement plans, and resolve/troubleshoot service issues at the site level. Analytical capability: Analyze trends and utilize data to anticipate and proactively address issues in the environment. Financial Acumen: Challenge year-over-year cost increases and proactively identify ways to reduce “process waste” and costs. Qualifications EDUCATION AND EXPERIENCE Bachelor's degree in Engineering, Mathematics, Science or another relevant field is desired but not required; experience in lieu of degree will be considered. 5 years of GMP or ISO 9000 experience in manufacturing. Experience in pharmaceutical manufacturing preferred. Must have proven, successful GMP or Quality Compliance/Assurance experience working with vendors performing services in GMP space GMP PEST CONTROL PROGRAM Proven capabilities on addressing and remediating pest sightings and investigations in a GMP Manufacturing Facility. Ability to establish rationales on Pest Control Best Practices. Ability to prepare and analyze Pest Control Trend Reports, subject to Regulatory Agency review. Experience in auditing GMP Pest Control Programs. Some knowledge in entomology and common insect behavior. GMP | CLEAN ROOM JANITORIAL AND SANITIZATION PROGRAMS Strong Knowledge of Environmental Controls of GMP Clean Rooms. Strong understanding of Regulatory Expectations. Ability to recommend, frequency and propose recommended dilutions of cleaning detergents for specific needs and situations. Develop cleaning procedures, work instructions and log forms in compliance with regulatory expectations. Train on Cleaning Methods and Procedures. Proven capabilities on addressing and remediating investigations related to Environmental Monitoring excursions as it related to a cleaning/disinfection programs. Ability to recognize when a GMP Change Control is required when proposing new cleaning methods, detergents and consumables. KNOWLEDGE, SKILLS, AND ABILITIES Must possess strong interpersonal skills with the ability to build rapport quickly Knowledge of Quality Engineering techniques, CMMS systems, and Quality Management Systems Exhibit excellent written and verbal communication skills Ability to analyze reports for the purpose of ensuring compliance with scope of work Excellent PC skills: proficient in all MS applications, especially Excel, Word, PowerPoint, Visio Speak, read and write fluent Englis Additional Information All your information will be kept confidential according to EEO guidelines.

We're opening a new warehouse in Lowell, MA! At Raymour & Flanigan, we recognize and appreciate all of our team members' hard work and dedication. We pride ourselves on being a long term, privately held company that takes care of its associates by recognizing each individual's potential and investing in their future success! If you enjoy building things and have a desire to work for a successful company where you can use your artistic and technical skills, then Furniture Repair Technician may be just the role for your career ambitions! As a warehouse Furniture Repair Technician, you will be responsible for setting the standard of excellence for the quality of the merchandise our customers will receive. Expectations: * Assessing damages and choose appropriate methods of repair for wood furniture, leather, fabric and upholstery. * Maintain a neat and safe work environment. * Ability to work in a fast paced environment. * Must be comfortable working with hands and displays an aptitude for craftsmanship, artistic and/or carpentry services. * Meet standards to complete furniture "deluxing" process. * Commitment to Raymour & Flanigan's safety policies and procedures and ability to promote awareness. * Demonstrate high level of attention to detail and professionalism at all times. * Possess excellent organizational skills. * Excellent listening skills and the ability to work independently and with a team. * Perform additional functions that may be assigned at the discretion of management. Qualifications: * Two years experience working with wood furniture, leather, fabric & upholstery. * Color matching & blending * Wood repairs including burn-ins & wood graining. * Leather repairs including scuffs, holes and tears. * Upholstery repairs including structural/mechanism replacements. * Excellent time management skills and attention to detail. * High School Diploma or equivalent. Physical Requirements: * Lift, lower, push and pull all sizes of furniture up to and in excess of 100 lbs. Raymour & Flanigan proudly supports a drug and smoke free work environment. Please note that we are currently unable to offer visa sponsorship for this position. Candidates must have authorization to work in the U.S. without the need for sponsorship now or in the future. Raymour & Flanigan is an Equal Employment Opportunity employer that does not discriminate against any associate or applicant on the basis of race, creed, color, religion, sex (including pregnancy), age, national origin, physical or mental disability, status as a victim of domestic violence, sexual orientation, sexual and other reproductive health decisions, marital or familial status, genetic information or other basis protected by law.

Join one of the most established, respected and well-known BMW Motorrad Dealerships in the country at MAX BMW Motorcycles. At the Northeast's only exclusive BMW Motorrad Service Department, you will be applying your skill and experience on leading BMW Motorrad product technology routinely and growing your career with access to the best manufacturer training in the industry. This Dealership was started by Technicians, so the business leaders understand how important their technicians are to the success of the business firsthand. As such, all Technicians are routinely provided OEM training to keep them informed of new product technology and efficient, successful “fix-it-right the first time every time” processes. The Team at MAX BMW is focused and committed to working together for success. As a result of growth and the need for additional Service Technicians to service the ever-popular BMW Motorrad product lineup, MAX BMW is seeking multiple Service Technicians to grow with the Team in the following locations. Location(s) North Hampton, NH Job Description As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive, Heavy Equipment / Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High school diploma or equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • 18 years of age or older • Own & maintain a valid driver's license • Must perform duties and responsibilities in a safe manner • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, drug test, and maintenance of a valid driver's license

* One Time $8,500.00 Sign on Bonus* Schedule: 10:00AM-6:30PM Under minimal supervision and following established procedures and methods, maintains inventory of complex, delicate endoscopic equipment and related component parts. Monitors and/or performs specialized cleaning and decontamination and inspects, assembles and prepares equipment for surgical cases. Performs and/or arranges maintenance and repair services and serves as a resource on equipment use and operation. Tracks and maintains inventory, reordering supplies, monitoring purchase and repair costs and assisting in selection and introduction of new supplies and equipment. Key Responsibilities: * Ensures availability of sterile endoscopic equipment for surgeries, including retrieval, assembly, and specialized sterilization to meet surgical schedules. * Acts as a resource for operating endoscopic and audiovisual equipment; performs inspections, routine maintenance, and troubleshooting. * Coordinates equipment readiness for procedures by providing substitutions and responding to technical assistance requests. * Manages ordering and restocking of endoscopic supplies based on par levels, including receiving, verifying, and distributing inventory. * Oversees proper storage and rotation of supplies, ensuring labeling and packaging meet standards. * Maintains detailed records of inventory, purchasing, equipment repairs, and expenses; reconciles budget variances and supports budget planning. * Processes billing invoices and payment requisitions while addressing related inquiries and vendor issues. * Contributes to evaluation and implementation of new equipment and supplies; serves on relevant committees or project teams. Minimum Qualifications Education: * High School/GED Licensure/ Certifications: * Certified Registered Central Service Technician (CRCST) OR Certified Sterile Processing and Distribution Technician (CSPDT) required * Required to obtain: Certified Endoscope Reprocessor (CER) within one year of hire The posted pay range is Boston Children's reasonable and good-faith expectation for this pay at the time of posting. Any base pay offer provided depends on skills, experience, education, certifications, and a variety of other job-related factors. Base pay is one part of a comprehensive benefits package that includes flexible schedules, affordable health, vision and dental insurance, child care and student loan subsidies, generous levels of time off, 403(b) Retirement Savings plan, Pension, Tuition and certain License and Certification Reimbursement, cell phone plan discounts and discounted rates on T-passes. Experience the benefits of passion and teamwork.