Repair technician jobs in Columbus, OH - 1,242 jobs

As a Field Service Technician, you will be responsible for the proper operation and maintenance of CenTrak's hardware infrastructure, tags, and other devices at our customer sites. This is a highly visible customer facing position for a detail-oriented person who thrives in a fast-paced environment. You must be a focused individual able to work responsibly for us. This is a hands-on position that requires you to be very proactive and energetic to develop and maintain positive customer relationships. It is the responsibility of the Field Services team to keep these complex systems operating at an optimal health. Responsibilities: Perform battery replacement for CenTrak infrastructure, asset tags, environmental monitoring (EM) sensors, hand hygiene (HH) devices, etc. Perform small installations of infrastructure devices and validate via CenTrak software. Conduct troubleshooting of problematic areas in conjunction with remote support personnel Monitor equipment status and alerts via the Connect PulseTM application Ability to understand CenTrak designs with regards to device location within the hospital Submit Return Material Authorizations (RMAs) of products under warranty Maintain proper inventory of batteries and other equipment necessary for device maintenance Document daily activities, findings, and recommendations and provide to Customer Maintain rapport with customers by examining complaints, identifying solutions, and suggesting improved methods/techniques for the RTLS utilization Qualifications: Preferred: Degree in Networking/Telecommunications 2-3+ years of experience in a professional services environment supporting end-users Experience with IR, Wireless and Network Protocols a plus Experience in enterprise healthcare or hospital environments Advanced problem-solving skills coupled with a commitment to extraordinary customer service Maintain confidentiality and comply with Health Insurance Portability and Accountability Act (HIPAA) requirements Comfortable navigating all areas of the hospital system including patient rooms Comfortable occasionally working around or with potential biological hazards; proper personal protective equipment will be worn in accordance with medical center policy and procedures Demonstrate proficiency with Microsoft Office and other business applications Some area travel required between local sites (reimbursable). Must have a valid driver's license, insurance, and means of transportation Working hours are expected between 8:00 am - 5:00 pm While a standard 40-hour working week is the norm, you can expect some evening or weekend work on occasion to meet deadlines for major go-live activity Comply with required immunizations, health testing, and other vendor requirements Physical Requirements: Ability to walk/stand for an extended period, up to 8-10 hours/day Ability to kneel, climb, lift, and carry up to 30 pounds Required to climb and stand on ladders, sometimes for extended periods of time Required to work with tools while reaching above your head for extended periods of time

Territory: Columbus, OH and surrounding areas - Daily Travel & occassional overnight/weekend work An established organization supporting the construction and materials industry is seeking a Field Service Technician to support customers through on-site equipment installation, service, and technical support. This is a remote, field-based position with frequent local and regional travel. Training, tools, and a company vehicle are provided. Key Responsibilities Install, maintain, and service customer equipment at job sites Troubleshoot and repair mechanical, electrical, and pneumatic systems Support customers with basic equipment operation and maintenance Maintain inventory of parts, tools, and service materials Document service activities and communicate with internal teams Provide a high level of customer service in the field Qualifications Mechanical or maintenance experience demonstrating technical aptitude Basic knowledge of electrical, pneumatic, or mechanical systems Ability to lift up to 50 lbs and perform physical job-site tasks Comfortable working independently and managing a field schedule Flexible availability to support customer and business needs Valid driver's license and clean driving record Comfortable driving within the assigned territory Compensation & Benefits Competitive compensation Health insurance and retirement plan options Paid time off and paid holidays Company vehicle, tools, and equipment provided Additional Information Full on-the-job training provided Field-based role with autonomy and customer interaction Equal opportunity employer

Join a legacy of excellence in industrial refrigeration. CIMCO Refrigeration Inc., a leader in engineered refrigeration solutions across North America, is seeking skilled, safety-driven Service Technicians to support mission-critical systems in industries such as food & beverage, pharmaceuticals, cold storage, and recreational ice facilities. If you thrive in a hands-on environment and take pride in SAFETY, precision, and reliability-this is your opportunity to make an impact. What We Offer Paid time off & holidays Comprehensive health benefits (medical, dental, vision) 401(k) with company match Company-paid life & disability insurance Ongoing training & career development Supportive safety culture & leadership What You'll Do Diagnose, repair, and maintain industrial refrigeration systems using ammonia or CO2 Service diverse environments including food processing plants, pharmaceutical facilities, chemical plants, cold storage warehouses, and ice rinks Ensure adherence to CIMCO's safety protocols and procedures Maintain accurate service documentation Communicate professionally with clients, vendors, and internal teams What You Bring 3+ years of field experience in industrial/commercial refrigeration Experience with ammonia refrigerant systems (required) Familiarity with reciprocating and screw compressors Ability to troubleshoot electrical systems effectively Background in industrial refrigeration and/or gas compression systems RETA 1 & 2 certification (preferred; must be willing to obtain) Universal EPA certification (preferred; must be willing to obtain) Strong communication skills and confidence working directly with clients Proficiency with basic computer tools for electronic documentation Valid driver's license and clean driving record Physical capability to lift up to 50 lbs and climb ladders safely Who We Are CIMCO is one of North America's largest suppliers of thermal solutions, catering to industrial, recreational, and commercial sectors. Sustainability is where our heart is. We are devoted to helping our customers get to net-zero emissions-naturally. Join a team where safety, integrity, and technical excellence guide everything we do. With over 100 years of engineering excellence and a commitment to sustainability through natural refrigerants, CIMCO delivers innovative refrigeration solutions that power industries and communities across North America. We celebrate diversity and are committed to creating an inclusive environment for all employees. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The main purpose of this position is to maintain and repair all equipment to meet minimum standards set forth by the Department of Transportation. Also the technician must meet the standards of Werner Enterprises and its subsidiaries. Due to the nature of the essential job functions of this role, this is a safety sensitive position. The expected starting pay range for this position is $17.38 - $23.17 per hour. Offers determined based on experience, skills, and qualifications. We know benefits are critical and we are committed to offering comprehensive and affordable options for you and your loved ones. This position is eligible for benefits, which include medical, dental and vision plans. We also offer a 401(k) plan, stock purchase plan, paid time off, life insurance, disability plans and other optional supplemental coverage. Werner Enterprises provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, genetic information or veteran status or other status protected by law. We encourage applicants of all ages as we do not discriminate on the basis of an applicant's age. By clicking "Submit" you are expressly consenting to our Privacy Policy (available at *************************************** and to Werner Enterprises, Inc., its representatives, and affiliates ("Werner") contacting you about your inquiry, and that Werner may collect sensitive information about you to consider your employment as explained further in our Privacy Policy. All information collected will be handled and retained as explained in the Privacy Policy.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of "power" that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize "the joy and freedom of mobility" by developing new technologies and an innovative approach to achieve a "zero environmental footprint." We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Hourly rate starting between $36.04 - $41.19 $5,000 Sign-On Bonus Shift: 2nd or 3rd shift (will rotate on all 3 shift's for the first year) * Relocation assistance for candidates relocating more than 50 mile Wage Information $36.04 - $41.19 Job Purpose This position will be joining the Facilities department within Honda Development & Manufacturing of America, LLC's. The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end of life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and serve our customers. Role Description: Work on a team to perform facilities equipment preventative maintenance, repairs, improvements, and reporting, to maintain a high level of customer service in building, equipment, and utility operations. Continuously develop associate skills through Honda maintenance training program and find ways of introducing technologies and efficiency improvements. Key Accountabilities Complete preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical, heating, ventilation, and air conditioning, and building controls). Perform daily assigned work order tasks and communicate any follow-up needed Evaluates and recommends equipment improvements to improve availability, capability, and yield. Suggest and revise preventative maintenance to properly maintain facilities equipment Performs equipment failure analysis (including preventative and unscheduled maintenance). Troubleshoots and diagnose equipment problems. Participate in a reliability centered maintenance program for equipment. Participate in team activities to develop and maintain long term equipment reliability. Support total equipment management through daily and proactive activities to improve operations, promoting business targets and objectives. Provide mentorship and teambuilding through work habits, communication and the sharing of knowledge and expertise. Expand and maintain technical expertise through formal and on-the-job training opportunities. Support and engage in activities that drive new ideas, leveraging new technology, new methods and approaches to positively impact Honda's competitiveness. Qualifications, Experience, and Skills Minimum Educational Qualifications: * Completion of 2 year technical degree or equivalent equipment service experience Minimum Experience Desired: * 3 years of experience in a Facilities environment (industrial, or heavy commercial) * Will consider well qualified entry level candidate Other Job-Specific Skills Working knowledge of Facilities low and medium voltage electrical equipment (including substations, switches, cable, starters, Variable Frequency Drives, breakers, bus duct) and Building Management Systems. Ability to troubleshoot mechanical equipment, such as Heating, Ventilation, and Air Conditioning, Refrigeration, Air Compressors, Air Dryers, Boilers, Cooling Towers, Pumps, Plumbing & Piping. Good written and verbal communication skills with the ability to clearly express ideas Comply with Honda Health and Safety Policies Minimum computer (Word, PowerPoint, Excel) Self-motivated, creative thinking, and a positive attitude, continuous improvement and customer service driven Must use time effectively & prevent irrelevant issues or distractions from interfering with work completion. Demonstrate the ability to plan/prioritize work assignments, submit schedules, set clear milestones & completion dates. Demonstrate the ability to collect & analyze pertinent data, identify root cause, and develop effective countermeasures. Working Conditions * Identify the working conditions and physical demands which relate to the essential functions of the position (e.g., physical requirements, work environment, travel, necessary overtime, etc.) * High level of physical activity. Lots of walking, stairs, climbing, roof, hot/cold climate conditions. * Participate in Honda related improvement activities such as Honda Improvement Program * Work area focused on interior and exterior facilities mechanical room and manufacturing floor environment * Infrequent - Occasional trips to other plants or suppliers ( less than 1x per month ) * Ability to work effectively with production, equipment service associates and contractors * Willing to suggest improvements or enhancements to facilities operations. * Ability to prioritize work assignments with efficient time management. Willingness to work weekends, all shifts, overtime, and shutdowns as required. Complete the required Equipment Service Technical Development Program consisting of approx. 700 hours of classwork and hands-on training over a 4 yr. period. Demonstrate competence with Honda Core Non-Exempt Role and Responsibilities for Maintenance Technician / Equipment Service. What differentiates Honda and makes us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Regional Bonus (when applicable) Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued learning Training and Development Programs Additional Offerings: Lifestyle Account Childcare Reimbursement Account Elder Care Support Tuition Assistance & Student Loan Repayment Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Facility Engineering - Maintenance Technician III EOE We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Description FACILITIES ENGINEERING-MAINTENANCE TECHNICIAN III - 1 SHIFT PAY: $28.76 PER HOUR VISA SPONSORSHIP: NO RELOCATION ASSISTANCE: NO REMOTE: NO Do you enjoy working in a fast-paced environment and being challenged? If so, our client is the place for you! We are seeking Facility Maintenance Technician with experience repairing and performing preventive maintenance on electrical, HVAC, Compressed Air and residential equipment. About our client Our US client is a full-service, tier one automotive supplier, specializing in the design and production of lighting equipment, accessories, and electronic components. Their Ohio facility houses lighting and mold design, construction, production engineering, and dedicated associates in our Quality, Assembly, Sales, and Customer Service departments. How you will quality Demonstrating solid organization skills Demonstrating the ability to prioritize multiple requests Demonstrating excellent oral and written communication skills Being attentive to every detail Exercising critical thinking Solving problems Working well independently and with a team What you will be doing Enduring smooth operations with minimal unplanned downtime by: Repairing and maintaining equipment as assigned Conducting periodic equipment inspections Addressing mechanical, control, thermal, and electrical problems Researching, testing, and implementing new products and cost cutting ideas Working conditions General Office Environment (1.5) hours per day Manufacturing Environment (6.5 ) hour per day Occasional overnight travel may be required to perform essential functions at remote locations or receive training. Required to work overtime (unplanned and unscheduled) to meet customer deadlines and requirements. HAZARDS: While performing the job the position is frequently exposed to moving or mechanical parts. Moderate noise levels with specific areas required to wear hearing protection.

remote type Onsite time type Full time posted on Posted 7 Days Ago job requisition id J0049226 Job Family: Engineering : Job description Maintain, troubleshoot, and repair plastic extrusion lines. Re-programming machines and robots. experience with Fanuc Robots is a plus. Visually inspect, test, diagnose, and troubleshoot faulty equipment. Perform preventative maintenance on all plant equipment. Install new or repaired parts to keep machines running at a high standard. Read and interpret equipment manuals and schematic prints (electrical, pneumatic, and mechanical) to perform required maintenance and service. Work effectively and efficiently with production and senior leadership to solve problems. Working as a team player to reach consistent output goals Maintaining a safe workspace and commitment to following Hitachi Astemo's safety mission and standards. Our ideal candidate is: A driven team-player who is eager to learn. Two years of technical school training in Industrial Maintenance, Machine Repair, Automated Systems, or other similar skilled trades is desired, along with 2 or more years of verifiable work experience in related fields. Experience with PLCs, drives, and industrial controls is desired. Work schedule is 3rd shift working one weekend per month. First month of training will be on 1st shift Has a career-oriented mindset aiming to grow personally and professionally A High school graduate with strong computer and math skills A sound decision-maker and problem-solver who is ready to go above and beyond A strong understanding of our safety mission and its importance Job Type: Full-time Salary: $25.65 - $30.53 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Health insurance Life insurance Paid time off Referral program Retirement plan Vision insurance Experience level: 2 years 3 years Schedule: 8 hour shift Monday to Friday Night shift Overtime Weekend availability Work setting: In-person People with a criminal record are encouraged to apply Ability to commute/relocate: Sunbury, OH 43074: Reliably commute or planning to relocate before starting work (Required) Experience: Programmable logic controllers (Preferred) Mechanical knowledge (Preferred) Work Location: In person Equal Opportunity Employer (EOE) - Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender, identity, disability, protected veteran status and national origin. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. If you need a reasonable accommodation to apply for a job at Astemo, please send the nature of the request and contact information to ************************* when applying for the position.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Mobile Engineer: What this job involves - Operates, inspects, and maintains all HVAC, refrigeration, mechanical, electrical, plumbing, and production equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. Strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all HVAC/R systems. Individuals are expected to demonstrate technical expertise in HVAC and refrigeration and be multi skilled in electrical, HVAC, Piping/Plumbing, Material Handling Equipment and others in order to successfully complete daily/weekly work assignments. What is your day to day? Performance of ongoing preventive and repair response work orders on facility mechanical, electrical and other installed systems, equipment, and other components. Maintain, operate, and repair all HVAC/R systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds, and production equipment as it pertains to assigned buildings. Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in everyday activities. Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations. Submit P-card Receipts Daily Update work order status in real time Utilize CMMS systems such as Corrigo for all work performed. Candidate must possess and maintain a valid state driver's license Must be available for Call-in work and perform other duties as required Required Qualifications: Universal CFC recovery certification (or within 90 days of employment) Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in the technical aspects of HVAC/R, plumbing, electrical, production equipment repair and maintenance. Knowledge of overall system design and applications. Experience troubleshooting and maintaining commercial refrigeration and/or supermarket refrigeration. Preferred Qualifications: Experience utilizing CMMS (Work Order) systems Working knowledge of computer applications including Word and Excel Two years of trades school or documented apprenticeship in electrical systems, refrigeration and HVAC Location : Onsite, supporting the Cleveland , OH market Work Shift: Day shift This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Location: On-site -Columbus, OH If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

Title: Data Center FieldOps Technician (RunOps Technician) Contract:3 months with 1 year of extension The Datacenter FieldOps team is responsible for supporting all production network cabling in the Datacenter. This global team offers a unique career opportunity to work with the latest network technologies and talented engineers solving complex problems in the industry. Job Duties and Responsibilities Loopback Testing and Circuit Audits: Techs will perform loopback testing and circuit audits as per the project requirements. Loopback Testing Scope of Work: Identify all network circuits that require loopback testing Set up test equipment to simulate traffic on each circuit Perform loopback testing on each identified circuit Isolate and troubleshoot any faults or issues detected during loopback testing Document all test results, including any faults or issues found Circuit Audits Scope of Work: Conduct a physical inspection of all network circuits Verify that all network devices are properly configured and connected to the correct circuits Test the signal quality of each circuit Document all audit findings, including any discrepancies or issues found Remediate any issues found during the audit Overtime and Weekend Work: Overtime and weekend work will be available for all techs, as needed. Safety Briefings: Conduct regular safety briefings to ensure techs are aware of potential hazards and follow safety protocols. Physical and Mental Requirements ● Self-motivated, positive, professional, and proactive in process improvements. ● Promote company culture and mission. ● Proficient with required tools. ● Act as company liaison with customer representatives. ● Ability to work at heights, off ladders, in confined spaces. ● Lift up to 50 pounds and move up to 75 pounds. ● Good color vision, ability to read small print, and recognize audible signals. Skill Requirements ● Preferred in testing and troubleshooting MMF & SMF systems (OTDR & PMLS). ● Preferred 1-3 years of fiber experience. ● Preferred data center installation experience. ● Preferred mechanical and fusion splice experience. ● Preferred OSP / confined space entry experience (splicing). ● Proficient with trade tools including screwdrivers, torpedo level, tape measure, snips, pliers, hammer, wrench set, cable stripper, flashlight, gloves, punch tool, tone set, crimp tool, and Krone/3M/BIX tools.

We're looking for Autobody Preppers with a minimum of 3 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Experienced Auto Body Repair Technician, you'll be expected to perform bodywork on multiple panels, including: Heavy plastic welding Minor metal pulling Roof and rocker panel repair Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks - including a 401(k) with Carvana match and even a vehicle purchase discount - all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job 100% company-paid healthcare premiums Generous paid-time off and your birthday is a holiday! ASE and tool reimbursement programs Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at **************, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair) Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

What to Expect: The Lead Service Technician is responsible for providing technical direction and assistance to elevator personnel in servicing elevators, escalators, and other vertical transportation. Duties/Responsibilities: Assists in training elevator technician staff. Supports company safety program, which includes performing safety audits when necessary and stressing the importance of safety to all employees. Visits job sites and performs quality audits to ensure the work is being completed efficiently. Identifies issues that could potentially affect the overall reliability of the customer's equipment. Works with branch manager to address customer's needs. Maintains up-to-date knowledge of all federal, state, and local elevator industry code requirements. Maintains strong familiarity of industry products by reviewing equipment updates and supplier goods. Assists in conducting inspection of elevators and related devices to ensure their effective and efficient operation and conformance to safety regulations and OSHA requirements. Performs other duties as assigned Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions Attributes: Ability to read and interpret technical drawings & manuals Organized with attention to detail Good communication skills & ability to work well with others Ability to work in a fast-paced and stressful environment Good troubleshooting skills Ability to learn quickly Excellent time-management skills Requirements: High school diploma or equivalent At least five years of elevator service experience required Elevator mechanic license Valid driver's license and safe driving record Physical Requirements: Able to bend, stretch, push, pull, and move as needed to reach, clean, and service elevators Must be able to visually inspect elevators Must be able to lift up to 50 pounds Prolonged periods of standing and walking Valid driver's license and safe driving record EFS is proud to be an Equal Opportunity Employer

What to Expect: The Lead Service Technician is responsible for providing technical direction and assistance to elevator personnel in servicing elevators, escalators, and other vertical transportation. Duties/Responsibilities: * Assists in training elevator technician staff. * Supports company safety program, which includes performing safety audits when necessary and stressing the importance of safety to all employees. * Visits job sites and performs quality audits to ensure the work is being completed efficiently. * Identifies issues that could potentially affect the overall reliability of the customer's equipment. * Works with branch manager to address customer's needs. * Maintains up-to-date knowledge of all federal, state, and local elevator industry code requirements. * Maintains strong familiarity of industry products by reviewing equipment updates and supplier goods. * Assists in conducting inspection of elevators and related devices to ensure their effective and efficient operation and conformance to safety regulations and OSHA requirements. * Performs other duties as assigned * Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions Attributes: * Ability to read and interpret technical drawings & manuals * Organized with attention to detail * Good communication skills & ability to work well with others * Ability to work in a fast-paced and stressful environment * Good troubleshooting skills * Ability to learn quickly * Excellent time-management skills Requirements: * High school diploma or equivalent * At least five years of elevator service experience required * Elevator mechanic license * Valid driver's license and safe driving record Physical Requirements: * Able to bend, stretch, push, pull, and move as needed to reach, clean, and service elevators * Must be able to visually inspect elevators * Must be able to lift up to 50 pounds * Prolonged periods of standing and walking * Valid driver's license and safe driving record EFS is proud to be an Equal Opportunity Employer

Job Description Are you an expert in repairing restaurant equipment? Is it time to take your appliance repair career to the next level with a company that truly cares about your success? If so, JAGS Mechanical in Cincinnati and Columbus, OH wants YOU as our next full-time Food Service Repair Technician! But why should you join us? We're glad you asked! As our Food Service Repair Technician, you'll earn a competitive salary of $50,000 - $120,000 per year, alongside phenomenal benefits that include: 401k with employer match Health, vision, and dental insurance with premiums paid 80% by Jags Short and Long-term disability (100% employer-paid) Paid vacation Holidays Boot allowance Payroll tool loan Training & a pathway to becoming a CFESA-certified technician THE INS AND OUTS OF THIS APPLIANCE REPAIR ROLE Schedule: You'll work a full-time Monday through Friday schedule between 8 AM and 5 PM. Day-to-Day: As a Food Service Repair Technician with JAGS Mechanical, you'll play a crucial role in maintaining and repairing food service equipment. You'll troubleshoot issues, conduct routine maintenance, and ensure equipment operates at peak performance. Your expertise will be key in responding to service calls promptly and providing top-notch customer service. Training and mentoring helpers will also be part of your responsibilities, ensuring our team remains skilled and efficient. Qualifications: 5 years of experience repairing food service equipment Willingness to learn additional trades The ability to train future generations of technicians is ideal! COME THRIVE WITH US! At JAGS, we're more than a company; we're a community of forward-thinkers passionate about blending innovation with tradition. Our mission? Redefine industry standards by creating comfortable, efficient spaces. We value collaboration, offer growth opportunities, and pride ourselves on a culture that celebrates achievements and supports each team member's journey. Who Shouldn't Apply People who stay stagnant in their careers and aren't looking to grow. Anyone who struggles to stay in a role for at least two years. Those who think growth comes without hard work and challenges. Constant complainers who focus on problems instead of solutions. People who are content with staying the same and not improving. We're building a team of motivated, hardworking individuals who want to push themselves and grow with us. If that sounds like you, we'd love to have you on board. Take the next step in your career with JAGS Mechanical! Our initial application process is quick, easy, and mobile-friendly. Join us and grow your appliance repair career with a company that values your skills and expertise! Job Posted by ApplicantPro

HVAC Repair Technician Why an HVAC Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home like a first responder, lifting the weight off the shoulders of grateful homeowners You like to be on the move - You're not stuck at a desk all day - you are welcomed into customers' homes Why a career with Sears Home Services is right for you: Great hourly rates - $22 - $36 / hour base rate salary, depending on experience Benefits - Comprehensive set of medical, dental, and vision benefits, with an additional $4000 annual subsidy for associates with dependents! 401k match - Opportunity to contribute to 401k plan, with 100% company match up to 3%. More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Flexible schedules - Sears techs are NOT on call. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round Expert training - Best in class training program. Tens of thousands of repair techs trained by Sears Technical Institute in the past 60 years. We will teach you the skills you need to succeed! Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Easy tools - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support Job responsibilities: Repair appliances with high levels of quality and efficiency Deliver delightful customer experience that exceed expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Requirements: High school diploma or general education degree EPA Type II or EPA Universal Mechanical knowledge, including use of testing & repair tools Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Background & drug screen Valid driver's license for the state in which you work

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Furniture Service Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As a Furniture Technician you will be responsible for providing high quality repairs for every customer. The duties and expectations of this job are as follows: Customer Work Orders Call all scheduled customers between 8 am and 10 am Run all calls that are scheduled for the day Expected to perform quality repairs such as; Repair and or touch up of leather Repair or sewing of fabric Replace reclining mechanisms Wood burn in and touch-up Repair and reinforce furniture frames Case good assembly Perform Bedding inspections Order parts and put comments in work order from the customers home Finalize all billing notes from the customers home (symptom - work performed - parts used - labor amount) Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time/Regular Company reserves the right to add or delete from job description as needed. #bswarehouse Compensation: $40,000.00 - $60,000.00 per year Independent Retail offers a myriad of opportunities for people of all backgrounds. When you think of jobs in retail, sales associates and store managers are probably the positions which come to mind. But what if we told you that 44% of people who work in retail don't work in sales? Retail offers flexible, collaborative careers in logistics, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service - to name just a few. Retail companies are also some of the most exciting brands in the country - and they're driving the industry's innovations in customer experience. Retail is the #1 private-sector employer in the country If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills and most importantly, gain success in a field that rewards ambitious hard workers, retail is for you! This employment opportunity is available at the organization listed at the top of this page. Your application will go directly to them and all hiring decisions will be made by their management. All inquiries should be made directly with the organization that posted this employment opportunity.

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Furniture Service Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As a Furniture Technician you will be responsible for providing high quality repairs for every customer. The duties and expectations of this job are as follows: Customer Work Orders Call all scheduled customers between 8 am and 10 am Run all calls that are scheduled for the day Expected to perform quality repairs such as; Repair and or touch up of leather Repair or sewing of fabric Replace reclining mechanisms Wood burn in and touch-up Repair and reinforce furniture frames Case good assembly Perform Bedding inspections Order parts and put comments in work order from the customers home Finalize all billing notes from the customers home (symptom work performed - parts used labor amount) Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time/Regular Company reserves the right to add or delete from job description as needed. #bswarehouse

**We are more than a health system. We are a belief system.** We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. ** Summary:** Participates in the pre-analytical, analytical and post analytical phases of patient testing. This includes specimen processing, collection and handling as well as test analysis and reporting. Performs routine and complex chemical and biological analysis of blood, tissue, body fluids and excretions of patients, which includes principles of human growth and development according to established laboratory guidelines. The patient specific population is defined in the department scope of service to which this position is assigned. Through understanding of the principles of the procedures, this position integrates, correlates, or evaluates the data obtained for the purpose of determining the validity of results as related to patients and standards. **Responsibilities And Duties:** a. Assesses the physical, psychological, developmental, age-related and cultural health dimension of patients while utilizing interview, observation and inspection techniques. Uses appropriate equipment for the age and condition of the patient when collecting specimens. b. Obtains blood from inpatients, outpatients, and nursing home patients to perform analysis. Involved in the collection or handling of other specimens such a body fluids, urine, stool, semen and throat culture samples for analysis, providing patient education as appropriate. c. Accurately applies the policy and procedures for patient and specimen identification during specimen collection, labeling and processing. d. Transports patient records and samples between laboratory, nursing stations, and nursing home facilities. Performs all related registration and order entry functions as needed, including LMRP evaluation, pre-registration functions and managed care procedures. e. Accurately processes orders using computerized or manual methods including the tests ordered and all other pertinent information as requested by the physician. Performs timely and accurate audits of this process. f. Follows established protocol in processing specimens that are shipped to reference laboratories. II. a. Performs immunological, chemical, microscopic, bacteriologic, serologic, and hematologic testing according to department policy and procedures. b. Operates, calibrates, and maintains instrumentation and equipment. c. Prepares reagents and control material as required for testing. d. Completes testing procedures in an efficient manner such that turnaround time policies are met and overtime is minimized. e. Recognizes problems, makes corrections, and applies backup procedures appropriately in the event that standard testing methods fail. Corrective action is initiated appropriate for the education and experience of the position. III. a. Required documentation of activity in each department is performed, including temperature logs, daily checklists, daily monitoring logs, pending logs, result review worksheets and the Laboratory Informant. b. Assists in maintaining appropriate inventory of supplies and reagents, while minimizing waste and offering ideas for cost reductions. c. Requisitions are completed with accuracy. d. Verifies and releases test results using automated and manual methods. e. Critical value notification is performed and documented per policy. f. Follows all policy related to requests to phone or fax results and documents that action accordingly. IV. a. Performs daily quality control for analyses, test kits, or other testing reagent as required. b. Calibrates automated analyzers, or other equipment as required. c. Performs proficiency testing including CAP surveys and intra-laboratory testing as required. d. Performs preventive maintenance on all equipment as scheduled. e. Participates in annual competency programs within the laboratory. V. a. Coordinates and monitors the proficiency testing surveys, intra-laboratory proficiency surveys, and external quality assurance programs for the analysis and/or instrumentation in the respective areas, according to departmental policy. b. Develops and monitors the quality control program of the respective areas, including daily quality control, preventive maintenance, instrument and/or method correlations, daily surveillance systems, taking remedial action for deficiencies as needed. c. Performs and evaluates new test method validation studies, and all associated processes, according to departmental policies. d. Participates in the budget process by providing capital equipment projections for the respective area, minimizing waste and identifying cost reductions. e. Develops the training program for new employees of the respective areas and monitors the employee's compliance with standard operating procedures. f. Cooperates with the training program developed for the education of students within the Department. g. Assists in developing and monitors the competency program for the respective areas. h. Follows regulations of JCAHO, CLIA ,88, and other appropriate regulatory agencies. i. Assists in developing laboratory policies and procedures. VI. a. Responsible for compliance with the Shared Values Program Corporate Compliance e through raising questions and promptly reporting actual or potential wrongdoing. b. Participates in and promotes a performance improvement approach that includes both intradepartmental and interdepartmental activities. c. Responsible for maintaining safe practice standards and for the identification of safety management issues. d. Participates in and contributes to professionally related conferences, committees and meetings inside and outside the organization. e. Applies policies and procedures of Grady Memorial Hospital in an appropriate manner. f. Maintains appropriate confidentiality standards in areas of responsibility. g. Fulfills other designated functions and responsibilities. **Minimum Qualifications:** Bachelor's Degree (Required) NAACLS - National Accrediting Agency for Clinical Laboratory Services - American Society for Clinical Pathology **Additional Job Description:** Certification of training from an accredited medical technology program recognized by the National Accrediting Agency for Clinical laboratory science (NAACLS) or equivalent. Certified or Certification eligible by the American society of Clinical Pathologists (ASCP) or equivalent. Two years laboratory Experience . **Work Shift:** Evening **Scheduled Weekly Hours :** 40 **Department** Transfusion Services Join us! ... if your passion is to work in a caring environment ... if you believe that learning is a life-long process ... if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Furniture Service Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As a Furniture Technician you will be responsible for providing high quality repairs for every customer. The duties and expectations of this job are as follows: Customer Work Orders Call all scheduled customers between 8 am and 10 am Run all calls that are scheduled for the day Expected to perform quality repairs such as; Repair and or touch up of leather Repair or sewing of fabric Replace reclining mechanisms Wood burn in and touch-up Repair and reinforce furniture frames Case good assembly Perform Bedding inspections Order parts and put comments in work order from the customers home Finalize all billing notes from the customers home (symptom - work performed - parts used - labor amount) Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time/Regular #BSWAREHOUSE Company reserves the right to add or delete from job description as needed. Compensation: $40,000.00 - $60,000.00 per year Independent Retail offers a myriad of opportunities for people of all backgrounds. When you think of jobs in retail, sales associates and store managers are probably the positions which come to mind. But what if we told you that 44% of people who work in retail don't work in sales? Retail offers flexible, collaborative careers in logistics, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service - to name just a few. Retail companies are also some of the most exciting brands in the country - and they're driving the industry's innovations in customer experience. Retail is the #1 private-sector employer in the country If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills and most importantly, gain success in a field that rewards ambitious hard workers, retail is for you! This employment opportunity is available at the organization listed at the top of this page. Your application will go directly to them and all hiring decisions will be made by their management. All inquiries should be made directly with the organization that posted this employment opportunity.

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Furniture Service Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As a Furniture Technician you will be responsible for providing high quality repairs for every customer. The duties and expectations of this job are as follows: Customer Work Orders Call all scheduled customers between 8 am and 10 am Run all calls that are scheduled for the day Expected to perform quality repairs such as; Repair and or touch up of leather Repair or sewing of fabric Replace reclining mechanisms Wood burn in and touch-up Repair and reinforce furniture frames Case good assembly Perform Bedding inspections Order parts and put comments in work order from the customers home Finalize all billing notes from the customers home (symptom work performed - parts used labor amount) Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time/Regular Company reserves the right to add or delete from job description as needed. #bswarehouse