Repair technician jobs in Costa Mesa, CA

Company SMS Datacenter is a growing IT MSP for Managed Services, Colocation, Networking, Private Managed Cloud, and Help Desk. We are a team of engineers and techs who tackle new projects, challenges, and issues every day, supporting users' workstations, infrastructures, and networks so they can focus on succeeding in their own jobs. If you enjoy intense days of helping people and working with fellow professionals to solve problems and create clean solutions, then you may be a future member of our team! Description We are hiring capable Facilities and Cabling Technicians to join our team. The work will be on-site and at customers' sites in and near Irvine, California. This is a full-time contract estimated to last 4 - 6 months, with the possibility of being converted into a direct long-term position afterward. Responsibilities Trace, create, run, patch, tag, and manage cables Label cables physically and on diagrams Deploy and terminate various types of cable and cross-connections in data centers and at customer offices, which may include fiber, copper, 1G, or 10G cable Rack and stack, de-rack and de-stack Handle and help lift and move equipment and cabinets Provide remote hands for engineers as needed Work with customers respectfully, keeping composure and professionality with irate customers Train data center technicians Perform other job duties as needed Physical Requirements of the Role Must be able to safely lift and carry equipment and materials weighing up to 50 pounds on a regular basis without assistance Must be able to safely lift heavier equipment with team assistance or use of appropriate lifting equipment (dollies, carts) Must be able to reach, bend, and crouch to access equipment in tight or elevated spaces, including server racks at floor and ceiling levels. Must be capable of standing, walking, and moving throughout the data center environment for extended periods of time. Must be able to work on ladders or platforms to manage cable runs or hardware in elevated racks. Must be able to do repeated hand and arm movements for cable management, hardware installation, and equipment maintenance. Must be able to use proper body mechanics while adhering to safety guidelines to prevent injury Other Required Qualifications Extensive experience and knowledge of cabling Problem-solving, adaptability, proactivity, and the willingness to take on and learn from a wide range of tasks as needed Preferred Qualifications Fiber splicing experience General network knowledge including, TCP/IP, Layer 2 (VLAN), WAPs, 802.11x, routing, switching BICSI, C-7, and/or forklift certification Certifications by CompTIA, Cisco, Fortinet, VMWare, or possessing equivalent knowledge

A food manufacturing company is seeking some Manufacturing Maintenance Technicians to join their team in Garden Grove, CA. This position is responsible for support of production and logistics through repairs, adjustments and improvement of utility equipment. A high school diploma, 2-3 years of maintenance technician experience, ability to lift 50lbs, ability to read electrical schematics, mechanical drawings and process flow diagrams, basic knowledge of foods safety, and the ability to read and understand machine manuals written in English or Spanish. This is a full-time, in-person, non-exempt position with excellent benefits and 401k. Spanish is a big PLUS but not mandatory. **Only 3rd shifts are available: 3rd shift (9:00 PM to 6:00 AM)** Manufacturing Maintenance Technician Duties: -Respond to service request from Production and the other departments -Perform appropriate trouble shooting, repair or improvement -Perform scheduled maintenance to prevent breakdowns and extend the lifespan of equipment -Improve production efficiency, energy consumption, amount of waste, maintenance cost, work safety and work environment with continuous effort -Communicate with shift supervisor and coworkers to complete work order -Maintain tools, machine parts, supplies and workshop well -Input Work Orders using CMMS (eMaint) -Manage and operate utility equipment including but not limited to electric switch gears, boiler, air compressor, chiller, ventilation -Conduct company project helping maintenance manager and related department. -Regularly checking machinery and equipment for wear and tear, potential issues, and compliance with safety standards Manufacturing Maintenance Technician Skills: -Must have a high school diploma -Must have 2-3 years maintenance technician experience -Must be able to read and understand machine manuals written in English or Spanish -Must be able to drive a forklift and aerial work platform -Must have ability to read electrical schematics, mechanical drawings and process flow diagrams -Must know foods safety basics -Must be able to lift 50lbs ****If interested, please apply with your most updated resume including your minimum salary requirement and why you left/or are looking to leave your current company. **** ----------------------------------------------------------------------------------- Activ8 West- Los Angeles (Japanese Recruiting Company) Recruitment & Solutions / Renaissance Resources Inc., has been a trusted leader in North American recruiting for Japanese businesses for over 25 years. We specialize in connecting top talent with companies in the Automotive, Electronics, Food & Beverage, Logistics, Manufacturing, Oil & Gas, Banking & Finance, and Entertainment industries. Our client-focused approach ensures that we understand your unique needs, whether you're a company seeking skilled professionals or a candidate looking for the right career opportunity. By working closely with each individual, we provide tailored solutions that drive success. We screen ALL Candidates to verify the validity of each applicant's provided information. Upon submitting your resume, we will contact only those candidates that we deem qualified for our client. If we do not contact you, we do not see the fit for the position. If we are unable to reach you in a reasonable timeframe, you will be eliminated from the pool of potential candidates. We prioritize direct applicants; third-party resumes may not be reviewed.

We are seeking a dedicated and skilled Field Service Engineer to join our team. In this role, you will be responsible for providing on-site support and maintenance for battery energy storage systems (BESS). The ideal candidate will possess a strong background in battery system maintenance and be proficient in troubleshooting and repairing energy storage systems. Your expertise will ensure the reliability and efficiency of our operations while delivering exceptional service to our clients. Duties Perform routine inspections, maintenance, repairs, and replacements on battery storage units in the field. Troubleshoot and diagnose issues related to low voltage communication and high voltage energy storage units using computer software, multimeters, etc. Install components such as batteries, inverters, and power regulation equipment according to project specifications and safety codes. Commission systems to ensure compliance with performance and safety standards. Collaborate with team members to develop solutions for complex technical challenges. Communicate effectively with clients to provide updates on service status and recommendations. Document detailed records of system installation, operation, used parts, and maintenance activities. Collaborate with project managers and engineers to complete other related tasks. Qualifications Bachelor's degree with 0-5 years of experience in Electrical Engineering or a related field. Strong understanding of low voltage communication systems and high voltage utility power systems. Valid driver's license. Proficient in using electrical tools such as multimeters. Able to lift up to 50 lbs, climb stairs and ladders, and work outdoors. Responsible and willing to travel for at least 75% of work time. Ability to communicate effectively in English, both verbally and in writing. It's a contract role with high possibility to extend to full-time. We are happy to offer sponsorship for our full-time employee.

Omega Law Group is a prestigious personal injury law firm serving California and Texas. We are committed to championing the rights of individuals who have suffered due to negligence or wrongful acts. Our dedicated team is known for delivering exceptional service and winning results for our clients. Through innovation, compassion, and expertise, we have gained a reputation as one of the leading law firms in personal injury. To learn more, please visit our website: ***************** ***Recruiting agencies and third party staffing firms, while we admire your hustle, we would appreciate if you refrain from calling our office regarding this position or other business solicitations. Thank you! *** About the Role We are seeking a skilled and proactive IT Support Specialist to optimize our business-critical software systems while delivering top-tier end-user support. This role blends hands-on technical execution, ensuring seamless system performance, user satisfaction, and alignment of our technology platforms with legal workflows. The ideal candidate is a strong communicator, highly proficient in both firm-wide technology systems and day-to-day user support, particularly in legal or other professional services environments. Key Responsibilities Maintain and support all company hardware, software, and drivers, ensuring systems remain secure, updated, and aligned with business goals. Support system upgrades, licensing, integrations, and decommissioning in collaboration with internal stakeholders. Serve as Subject Matter Expert (SME) for office technologies including desktop setups, AV systems, and conferencing tools. Align technology platforms with legal workflows to support operational efficiency and user adoption. Provide high-touch IT support, including deskside and remote assistance for hardware, software, and mobile devices. Manage and support conferencing technologies within office meeting spaces. Act as a point of contact for complex IT support issues; oversee technology onboarding and offboarding processes. Maintain IT inventory, including setup, distribution, and asset tracking. Balance priorities between software support and user-facing needs, ensuring timely resolution of issues and project milestones. Partner with departments across the firm to drive IT-related projects, enforce security protocols, and support new technology initiatives. Perform additional IT duties as required. Qualifications Bachelor's degree in Computer Science or a related field. 3+ years of relevant IT experience Proficiency in Microsoft Office Suite, Windows, and Adobe Acrobat. Strong problem-solving skills with the ability to diagnose and resolve complex issues quickly. Excellent communication and interpersonal skills, with experience supporting professionals in high-demand environments. Prior experience in a law firm or fast-paced professional services setting preferred. Okta, 1Pass, VOIP, Apple Business experience preferred We are an equal opportunity employer and offer competitive compensation and benefits, and opportunities for growth.

Company Information Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect solutions to industries like Aerospace, Military & Defense Electronics, Space, Medical, Test & Measurement, and Industrial. Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. At Amphenol CIT, we make the amazing possible. Take the next step to become an integral part of our team by applying today and kickstart your journey with us. Summary A Facilities Maintenance Technician II plays a crucial role in ensuring the smooth operation of equipment used in manufacturing. Their primary responsibility is to perform regular preventive maintenance on machinery and tools to facilitate successful production activities. Essential Job Functions Responsible for maintaining building facilities using the Computerized Maintenance Management System (CMMS) to facilitate Total Productive Maintenance (TPM). Collaborates with other technicians to complete tasks and support the Environmental Health & Safety team. Performs maintenance tasks involving electrical wiring, pneumatics, PLCs, servo motors, inventory management, and spare parts to execute scheduled preventive and unscheduled general maintenance activities. Install new electrical circuits, ensuring compliance with safety protocols such as Lockout/Tagout (LOTO), Hot Work, Arc Flash, and Personal Protective Equipment (PPE). Conduct scheduled preventive maintenance (PMs) and unscheduled repairs, including troubleshooting electronic circuits and PLCs using schematics and OEM manuals. Perform mechanical and parameter adjustments, dismantle machines for repairs or PMs, and coordinate with technical support, both internally and externally, for CNC machines and production equipment. Assist in developing and reviewing new PMs, procedures, and policies. Execute work orders (W/O) and coordinate with outside vendors for equipment maintenance. Maintain functionality of emergency lighting, fire pump systems, alarms, extinguishers, and eyewash stations. Comply with all safety and work rules and regulations. Use appropriate PPE during maintenance tasks. Maintain departmental housekeeping standards and clean/restock area at end of shift. Engage in continuous improvement projects and 5S-related performance teams. Other duties as required in support of the department and the company* Supervisor Responsibilities This role is purely as an individual contributor. Qualifications To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform basic functions. EDUCATION And EXPERIENCE High school diploma or equivalent, e.g. vocational training. 2+ years of maintenance experience in electronics, hydraulics, pneumatics, and mechanical equipment. Background in electrical circuits. Tool repair experience preferred. Understanding and experience in a Lean manufacturing environment preferred. CERTIFICATES, LICENSES, REGISTRATIONS Certified Electrician preferred. Language Requirements Excellent verbal and written communication skills in English. Conversational in any other language preferred. Job Skills Intermediate understanding of MS Office, including Word and Excel. Ability to measure accurately using a ruler or tape measure. Proficient in the use of tools and power equipment. Demonstrates good judgment and decision-making skills. Ability to be flexible and function comfortably in a fast-paced, constantly changing, and ambiguous environment while maintaining a positive team environment. Reliable and flexible to work additional hours on short notice to complete orders and special projects to meet customer demands. Ability to work with minimal supervision. PHYSICAL DEMANDS The employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery, and exposure to hazards such as chemicals, heat, dust, or noise with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Carlisle Interconnect Technologies is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. We are committed to complying with all applicable laws and other environmental regulatory requirements. We are also committed to preventing pollution and improving our environmental performance in all our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing Carlisle Interconnect Technologies' environmental objectives and targets. Personal Protective Equipment Requirements ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection, in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL Travel is not required for this position AMPHENOL CIT RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." THE AFOREMENTIONED JOB REQUIREMENTS ARE SUBJECT TO CHANGE TO REASONABLY ACCOMMODATE QUALIFIED DISABLED INDIVIDUALS. Amphenol CIT is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. For more information regarding EEOC requirements please visit **************************************************************** *********************************************************************************************** Due to the nature of our business, the candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol CIT participates in the United States Department of Homeland Security E-Verify program. The E-Verify program is a web-based employment eligibility verification system for newly hired employees operated by the U.S. Citizenship and Immigration Services. Any candidate that needs an accommodation or assistance with the application process should contact HR at ********************************

Johnson Service Group, an award-winning staffing company is looking for a detail-oriented and motivated Test Technician to join our team. This entry-level role is ideal for individuals with a passion for electronics and hands-on testing. The successful candidate will assist in the testing, troubleshooting, and repair of power supply units, ensuring products meet quality and performance standards. Pay Rate: $25.00 HR Key Responsibilities Perform functional and electrical testing of power supply units according to established procedures. Troubleshoot and diagnose issues in electronic assemblies using test equipment and schematics. Execute soldering tasks, including rework and repair of surface mount and through-hole components. Maintain accurate test records, documentation, and data logs. Work closely with engineers to provide feedback and support product development and continuous improvement. Ensure all work complies with company safety, ESD, and quality standards. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

McKinley Paper and Packaging Company, a world-class Paper and Corrugated Container manufacturer is currently seeking people who want GREAT JOBS or A CAREER PATH with an industry leader. Come be part of the McKinley Team!!! We are hiring for all shifts. SUMMARY Responsible for maintaining all manufacturing equipment, conveying systems and utility support equipment to minimize downtime. DUTIES AND RESPONSIBILITIES The Maintenance Technician is responsible for troubleshooting, repairing, and maintaining machinery and mechanical / electrical equipment such as motors, conveyor systems, pneumatic and hydraulic systems, production machines, boilers, pumps, packaging equipment, material handling equipment, bulk delivery equipment, and blending/mixing systems. This position will primarily focus on the utilities and manufacturing equipment side of maintenance. Practice safe work habits at all times. EDUCATION and/or EXPERIENCE High school/GED or vocational school in related field required or 3 plus years of maintenance experience in a manufacturing environment. Certificates and Licenses: Certified Electrician, Trade or vocational certifications preferred. Other trade certifications or in-depth experience may be required, Must be able to read and interpret technical, mechanical or electrical drawings and schematics. Candidates are PREFERRED who offer the following: Prior work experience in the corrugated industry. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS May be required to maintain a current Lift Truck Operator License and/or other appropriate certification to work in certain areas or on certain equipment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job. While performing the duties of this job, the employee is regularly required to stand, walk, and occasionally sit. The employee may be required to lift and/or move up to 40 pounds and occasionally lift and/or move up to 40 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. PERFORMANCE MEASUREMENTS The performance of the employee will be measured as follows: Operating standards - the employee will need to meet or exceed the Operating Standards in the areas of quality, cost, safety, customer satisfaction and productivity. Such standards will be set annually and communicated to the employee. Personal growth - while the company will provide the tools to assist the employee to grow professionally the responsibility for moving forward lies with the individual. Each year's goals will be developed and agreed to by the employee and his/her superior. Employee relations - through observations the employee will be evaluated regarding his/her behaviors associated with appropriate human interaction, respect and communication. Creativity - this will be evaluated by how active the employee is in participating in advancing the business through new and innovative ideas. "McKinley Paper and Packaging provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training." Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Vision insurance

Now Hiring: Maintenance Mechanic I (2nd Shift) - Perfect for a Mechanically Inclined Technician Ready to Grow! Shift: 2nd (1:00pm - 9:30pm) Pay: $26-$28/hr (DOE) Type: Full-Time, Direct Hire Are you the person friends call when something needs fixing? Do you enjoy taking things apart, figuring out how they work, and putting them back together even better? If you're mechanically inclined and eager to grow your career, this could be the perfect fit for you. Our client is seeking a Maintenance Mechanic I with hands-on experience working with industrial equipment, tools, and systems that keep our manufacturing operations running smoothly. This is a great opportunity for someone with 1-3 years of mechanical experience (auto, facilities, industrial, HVAC, general repair, etc.) who is ready to take the next step. What You'll Do Perform routine preventative maintenance on production equipment and building systems Troubleshoot and repair mechanical, electrical, pneumatic, and plumbing issues Keep detailed records of work orders and maintenance activities in our CMMS system Monitor equipment performance and identify issues before they become problems Assist with continuous improvement, safety, and reliability projects Keep your workspace clean, organized, and “audit-ready” Support the facilities and utilities team to keep the entire plant operating smoothly What We're Looking For You don't need to be an expert - just someone with solid mechanical aptitude and a willingness to learn. 1-3 years of mechanical or maintenance experience (any industry) Ability to troubleshoot basic mechanical or electrical issues Comfortable working with hand tools, power tools, and diagnostic equipment Strong attention to detail and pride in doing quality work Ability to lift 25-50 lbs and be on your feet throughout the shift Positive attitude, teamwork mindset, and reliable work ethic Experience in manufacturing or GMP/OSHA environments is a plus, but not required; they'll train you. Why You'll Love It Here Steady 2nd shift with growth potential Hands-on training and mentorship from experienced mechanics Opportunity to work with a wide range of equipment and learn new skills Clean, safe, and supportive environment A team that values problem-solvers and people who take ownership Ready to Build Your Career? If you're mechanically inclined, eager to learn, and excited to be part of a team that keeps everything running, we want to meet you. Apply today to start your journey as a Maintenance Mechanic, and step into a role where your skills truly matter.

Torrance, CA 3X Positions Available 1st Shift - 6:00am-2:30pm 2nd Shift - 2:00pm-10:30pm ($0.5 Shift Premium) 3rd Shift - 10:00pm-6:30am ($1 Shift Premium) Salary $25p/h - $29p/h This is a fantastic opportunity to join a growing food & beverage manufacturing company in Torrance, CA. In this role, you'll control the efficient operation of all plant equipment by performing mechanical, electrical, pneumatic, and electronic repair and preventive maintenance. Responsibilities Troubleshoots and diagnoses all maintenance failures. Uses assembly drawings, P&IDs, and manuals to tune equipment for operation. Applies electrical (VFDs, SCRs, motor starters) and logic (PLC, SLC) principles to solve equipment problems. Utilizes basic plumbing, metalworking, and general facilities/building maintenance knowledge as needed. Works with operating devices such as gauges, RTDs, pressure transmitters, I/Ps, and vortex flow meters. Trains new Associates and team members on required skill sets for Maintenance. Maintains work area in a safe and orderly fashion per GMP and Safety guidelines. Operates SCADA system and completes required documentation. Performs miscellaneous duties assigned by the Team Leader. Works with and trains Operations Associates on basic equipment troubleshooting. Assists operations as needed during production. Skills 3-5 years of experience in food processing, working with troubleshooting and repair of production equipment with sophisticated control systems. Strong written and verbal communication skills. Ability to train other Associates in Maintenance operations. Ability and willingness to operate within a Self-Directed Work Team. Proficiency with SCADA systems. General mechanical knowledge and understanding of electrical and logic principles. Basic plumbing, metalworking, and general facility/building maintenance skills. Awareness of and adherence to Associate Safety guidelines. Understanding of GMP and Food Safety guidelines. Knowledge of proper machine operating and adjusting procedures. Ability to work within Production Improvement, Associate Involvement, and Temporary Teams as assigned. Education High School Diploma or General Education Degree (GED) is preferred.

1. Read machine assembly drawings and electrical schematics to identify machine malfunctions in mechanical and electrical systems 2. Adjust mechanical assemblies and control systems to correct machine malfunctions 3. Design and fabricate metal product for production equipment. 4. Work with maintenance department managers to analyze machine failures and develop plans to reduce downtime 5. Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. 6. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. 7. Examine parts for defects such as breakage and excessive wear. 8. Disassemble machinery and equipment to remove parts and make repairs. 9. Clean, lubricate, and adjust parts, equipment, and machinery. 10. Assist in the installation new and used equipment as instructed by manager 11. Upgrade existing equipment as instructed by manager 12. Help in writing and revising PM checklist and procedures for assigned equipment 13. Training of junior level mechanics. 14. Perform preventive maintenance of equipment 15. Identification of spare parts 16. Documents all work performed daily. 17. Submit purchase order request for parts. 18. Responsible for performing other tasks as instructed by Supervisor or Manager.

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position Role: Technology Lead - Java, Angular JS, Web Services (Interview on 19th August) Duration: Full Time Location: Irvine/Los Angeles, CA. Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technologies Preferred • At least 8 years of experience in Java, J2EE Skills • At least 2 years of experience in Hibernate, Spring Framework, HTML, jQuery, Caching mechanisms, AJAX, Angular JS / Node JS, CSS, Bootstrap • At least 2 years of experience in Oracle/MS SQL Server RDBMS and Apache Tomcat/Oracle WebLogic Application Servers. • Knowledge of configuring Webserver (Apache) Rules • Basic knowledge/experience of iOS • At least 2 years of experience in creating and consuming SOAP and REST web services • Ability to troubleshoot performance issues and identifying opportunities to improve code/design will be added advantage • Ability to quickly scale up on the domain and delivering highly efficient bug free code quickly. • To be able to design and develop using latest J2EE technologies, frameworks and latest development and testing tools. • Knowledge of Autosys Batch Jobs and Spring Integration Framework is preferred • Knowledge of Informatica ETL and Microsoft .NET is preferable but optional • At least 8 years of experience in software development life cycle and at least 2 years of experience in Agile development • At least 8 years of experience in Project life cycle activities on development and maintenance projects. • At least 3 years of experience in Design and architecture. • Ability to work in team in diverse/ multiple stakeholder environment. • Proven experience of managing and guiding teams desired. • Demonstrated ability to grasp concepts and quickly come up the learning curve to implement new technologies. • Prior experience in interfacing between disparate applications/systems/platforms would be preferred. • Ability to appreciate enterprise level architecture patterns. • Experience in Mutual Fund Markets domain is preferable but optional. • Strong Analytical and grasping skills. • Experience and desire to work in a Global delivery environment • Strong verbal and written communication. • Demonstrated ability to identify, socialize and implement unstated business needs/value adds. • Knowledge on Data Analytics, Content Management preferred • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Title: Repair Services Technician (Immediate Need) Repair Services Technician Pay: $22.50-$31.00 Repair Services Technician: Monday - Friday 7:30am- 4:30pm The Repair Services Technician Responsibilities: Ensure RMA repairs and calibrations are completed per 8-10 day repair goals. Ability to analyze and diagnose technical issues per designs and specifications of equipment serviced. Assist Service Repair Manager in material control and planning functions to support Repair Process. Maintain and improve on department Key Performance Repair Indicators (KPI's). Handle escalated customer issues replicating customer setup to ascertain problem Read schematics, apply electrical/electronic principles and troubleshoot instruments to board or component level where applicable to the support team of Service Technicians. Understand and apply AC theory to customer issues involving AC power test instruments duplicating customer setups to assess issue Ability to run Calibrations functions on a variety of instruments and equipment. Maintain a clean, organized and professional work environment, with Safety as the key focus. Diligent in solving and following up on customer issues Effective time management in an effort to meet or beat resolution time Work within prescribed electrical safety rules established by OSHA and Quality guidelines The Repair Services Technician Qualifications: 3-4 years or more experience in AC power electronics AA or Bachelor's degree, desired Ability to work in a fast moving Repair Lab with a lab team. Working knowledge of electrical instrument calibration for power, medical and battery systems. Working knowledge of inventory management and control is required to perform daily repair tasks. Capacity to work under tight or shifting deadlines and adhere to procedures Professional level verbal and written communication skills. Detail Oriented. Proficient in MS Office, and basic computer skills. If you believe you are a qualified candidate for this Repair Services Technician position, please apply below on our website! #HSIR

AVEVA is creating software trusted by over 90% of leading industrial companies. Salary Range: $127,200.00 - $212,000.00 This pay range represents the minimum and maximum compensation that the position offers, and final compensation can vary within the range depending on work location, job experience, skills, and relevant educational attainment and/or training. Job Title: Services Delivery - Solution Architect/Technical Leader Location: Lake Forest Employment Type: full-time The job This role sits within the Services Delivery team and plays a key part in designing and delivering industrial automation solutions using AVEVA software. As a Solution Architect/Technical Leader, you'll lead end-to-end SCADA/HMI implementations, bridging IT and OT systems. The team is collaborative, high-performing, and passionate about solving complex technical challenges. We value curiosity, trust, impact, and aspiration-and we support each other in learning and growing every day. This is a great opportunity to make a visible impact while working with cutting-edge technologies and a supportive, globally connected team. Travel: Travel requirements vary depending on project and customer needs, with at least 50% travel expected, including domestic and international trips as necessary. Key responsibilities Lead the design, development, and deployment of SCADA/HMI solutions using AVEVA Operations Control software. Define and own solution architecture and technical deliverables, ensuring alignment with customer needs and AVEVA product capabilities. Act as SME and discipline lead on engineering projects, ensuring quality and timely delivery. Support pre-sales efforts, technical documentation, risk management, and coordination with cross-functional teams. Oversee testing, project delivery, and solution transition to support teams; mentor junior engineers. Essential requirements Proven experience with AVEVA software (System Platform, OMI, Historian, OI Servers). Strong background in solution architecture, IT-OT integration, and project execution. Proficiency in technical documentation, scheduling, and project scope/risk management. Ability to lead cross-functional teams and collaborate with clients and internal stakeholders. Strong communication, leadership, and organizational skills. Desired skills Proficient in programming and integration using C#, .NET, SQL, and REST APIs; experienced with industrial protocols and control systems (PLC/DCS/IoT). Skilled in interpreting P&IDs and system drawings, with hands-on experience in enterprise system integration (e.g., SAP PM, Maximo) and cybersecurity practices. Strong understanding of OT/IT convergence, automation testing frameworks, and compliance with industry standards and regulations. Demonstrated ability to contribute to proposals, perform gap analysis, manage technical scope, and drive successful project outcomes. Exhibits AVEVA's core values through accountability, continuous learning, collaboration, innovation, and building trust-based relationships. Services at AVEVA Our dynamic global team of 700+ engineers, developers, consultants, solution architects and project managers are at the forefront of delivering AVEVA cutting-edge solutions to customers. The work is complex and technical, but immensely rewarding: we empower customers to harness the full transformative potential of AVEVA's solutions. If you're analytical, pragmatic, and driven to make a tangible impact on the sustainability of the industrial sector, our team is the perfect place for you. Find out more: *************************************** USA Benefits include: Flex work hours, 20 days PTO rising to 25 with service, three paid volunteering days, primary and secondary parental leave, well-being support, medical, dental, vision, and 401K. It's possible we're hiring for this position in multiple countries, in which case the above benefits apply to the primary location. Specific benefits vary by country, but our packages are similarly comprehensive. Find out more: aveva.com/en/about/careers/benefits/ Hybrid working By default, employees are expected to be in their local AVEVA office three days a week, but some positions are fully office-based. Roles supporting particular customers or markets are sometimes remote. Hiring process Interested? Great! Get started by submitting your cover letter and CV through our application portal. AVEVA is committed to recruiting and retaining people with disabilities. Please let us know in advance if you need reasonable support during your application process. Find out more: aveva.com/en/about/careers/hiring-process About AVEVA AVEVA is a global leader in industrial software with more than 6,500 employees in over 40 countries. Our cutting-edge solutions are used by thousands of enterprises to deliver the essentials of life - such as energy, infrastructure, chemicals, and minerals - safely, efficiently, and more sustainably. We are committed to embedding sustainability and inclusion into our operations, our culture, and our core business strategy. Learn more about how we are progressing against our ambitious 2030 targets: sustainability-report.aveva.com/ Find out more: aveva.com/en/about/careers/ AVEVA requires all successful applicants to undergo and pass a drug screening and comprehensive background check before they start employment. Background checks will be conducted in accordance with local laws and may, subject to those laws, include proof of educational attainment, employment history verification, proof of work authorization, criminal records, identity verification, credit check. Certain positions dealing with sensitive and/or third-party personal data may involve additional background check criteria. AVEVA is an Equal Opportunity Employer. We are committed to being an exemplary employer with an inclusive culture, developing a workplace environment where all our employees are treated with dignity and respect. We value diversity and the expertise that people from different backgrounds bring to our business. AVEVA provides reasonable accommodation to applicants with disabilities where appropriate. If you need reasonable accommodation for any part of the application and hiring process, please notify your recruiter. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

Job Description We provide: Year-round stable, steady work Regular work hours Flexible scheduling Company van and cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Claremont is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY Treating people with respect and looking for the same in return, everyone has a voice! TRUST Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY Taking pride in ones work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up!

Job Description You are at the top of your game! You know your trade, have mastered it over time, you need to keep challenging yourself, keep learning, and keep growing. You thrive on having a full schedule, handling the tough calls, and finding new and better ways to support customers. You love your work in the field, you don't want to have to think about how to keep the calls coming in. You love your independence, you value the support of a team and a company that supports your growth and development. If this sounds like you and you pride yourself on holding a higher standard, join us at Barker & Sons Plumbing as a Service & Repair Technician. About the Role: Barker & Sons Plumbing Service & Repair Technicians are independent operators with the backing of a vibrant and growing company that invests in its people and in driving new business. We keep our techs as busy as they want to be, well-trained, and supported with the top technology, tools, trucks, and continuous development opportunities honed by the elite NexStar Service Professionals' best practices and the Orange County PHCC Trade School. Our techs are among the top tier of Plumbing Services Professionals, and they actively take control of their future and financial success by embracing the opportunity to master their craft. Compensation: $95,000 - $200,000 yearly Responsibilities: Diagnose & repair residential plumbing systems. Develop multiple solution options for customers and assist them in making well-informed decisions about the best solution for their situation. Design & inspect plumbing systems, conduct diagnostics, and ensure compliance with regulatory codes. Install, maintain, and repair sanitation units, water & gas supply lines, heating systems, and related fixtures & appliances in residential properties. Troubleshoot & effectively resolve issues promptly for the customer. Provide consistent 5-star customer experiences in alignment with the Barker & Sons home services proven process. Utilize technology (iPad) and established workflows to ensure consistent support and solutions. Maintain a professional appearance and demeanor such that your mom, sister, wife, daughter, or really anybody would gladly welcome you into their home and be grateful you're the one there to solve their problem(s). Take full accountability and pride in the upkeep and readiness of your truck, tools, and any parts and equipment assigned to you. Account for the parts you use; return what you don't, and reconcile your inventory with the Warehouse. Qualifications: Required: Experience in diagnosing and resolving residential plumbing service calls. Willing and able to commit to following the Barker & Sons proven process for service & sales. Strong communication skills with the ability to establish rapport and close sales with a diverse clientele, often with very high expectations. Comfortable working both independently and as part of a team. Able to communicate with customers, technicians, support staff, managers, and anyone else who may need services. Able to maintain professional appearance standards & approachable demeanor. Able to use and/or learn new technologies (ex, iPads) and software systems to facilitate operations. Self-motivated, responsible, and humbly confident. Hold a valid (CA) driver's license with a clean driving record. Able to conduct a background check for Home Services. Able to commute to Orange, CA, daily. Preferred: 3 years of residential plumbing experience. Experience interacting directly with and selling home services to customers. Experience following an established service & sales-proven process. Experience using iPads, tablets, or similar technologies as part of a service & sales process. Desired: Track record of 6-figure annual plumbing sales. Experience working within a NexStar Home Services company. Experience working within a company using Service Titan or similar software. About Company Barker and Sons Plumbing is a dedicated team of professionals that's been serving Orange County since 1983. We've grown by hiring the best professional plumbers and making life easy for them. We take great care of them, they love their jobs, and our customers love us for it. Using the latest technology, we provide a complete range of plumbing, drain, and sewer services and do the job right. “We do great work…because we've got great people.” Professional advancement through sponsored training and continuous development. Health and wellness package inclusive of medical, dental, and vision, along with short-term disability and life coverage. 401(k) with a 4% match. Paid time off, paid holidays, and adaptable schedules. Company-provided service truck, tablet, and uniforms. Company-wide family events.

Job Description In April 2025, Kandu Health and Neurolutions merged to form Kandu Inc. to pioneer an integrated approach to stroke recovery, combining FDA-cleared brain-computer interface technology with personalized telehealth services. The company's IpsiHand device is durable medical equipment that enables chronic stroke survivors to regain upper extremity function in daily home use. Combining this advanced technology with the support of expert clinicians offers a comprehensive path to recovery- helping survivors improve mobility, independence, and quality of life. Kandu extends recovery beyond the hospital through principal illness navigation, providing one-on-one education, care coordination, and advocacy; grounded in clinical evidence and informed by the lived experiences of patients and their families. The Service Repair Technician will be responsible for comprehensive support for the production lifecycle, from interpreting technical documents and assembling/testing electronic and mechanical components to ensuring final product quality and packaging. What You'll Do Collaborate with engineering, production, and service departments to efficiently troubleshoot and resolve various material, assembly, and service-related issues. Interpret technical drawings/work orders and utilize a variety of tools and electronic test equipment for the precise assembly, testing, and repair of electronic/mechanical components and finished products. Perform quality assurance inspections, manage production line inventory, rework PCBs and custom electronics, and handle labeling, packaging, and shipping procedures. Ensure a safe working environment by adhering to all safety protocols and regulations, maintaining a clean and calibrated workspace, and documenting all processes. What You'll Bring High school diploma or equivalent. Proven experience as a Senior Technician or in a similar role in a medical device assembly environment. Strong mechanical aptitude and familiarity with hand and power tools. Ability to read and interpret technical documentation, blueprints, and diagrams. Excellent attention to detail, with a focus on quality and accuracy. Strong problem-solving skills and the ability to work well under pressure. Effective communication and interpersonal skills. Ability to work independently as well as in a team environment. Must be able to lift 25lbs consistently throughout the shift Knowledge of safety protocols and procedures in a manufacturing environment. What We Offer Competitive Compensation ($28.00 - $32.00 p/hr) Insurance (Medical/Dental/Vision) 401(k) with company Unlimited PTO & Holidays Life Insurance, LTD and STD Please note that the salary information is a general guidance only. Kandu Health, Inc. considers factors such as scope and responsibilities of the position, candidate's work experience, education/training, key skills and internal parity, as well as location, market and business considerations when extending an offer. Kandu Health is an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Powered by JazzHR S4y1JwFwJt

Are you an experienced DC Power Technician looking to take the lead on critical infrastructure projects? This role offers the opportunity to oversee field operations, manage complex installations, ensure strict compliance with safety standards, and mentor technicians in a hands-on environment.

Benefits: Bonus based on performance Company car Competitive salary Flexible schedule Free uniforms Role: Lead Home Service Technician / Handyman We provide: Year-round stable, steady work Regular work hours Flexible scheduling Vehicle maintenance / gas reimbursement TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the Lead Home Service Technician / Handyman skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $40.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Details: Are you an experienced DC Power Technician looking to take the lead on critical infrastructure projects? This role offers the opportunity to oversee field operations, manage complex installations, ensure strict compliance with safety standards, and mentor technicians in a hands-on environment. Details: Key Responsibilities Battery & Rectifier Installations: Install battery and rectifier systems across all voltage levels, ensuring compliance with customer and industry specifications. Ironwork & Cable Rack Construction: Perform ironwork and cable rack builds, including specialized work in Zone 4 environments. Equipment Maintenance & Testing: Work with distribution equipment such as PBDs, BDFBs, and BDCBBs. Conduct diagnostics, including load testing, voltage/gravity readings, and system troubleshooting. DC Power System Upgrades: Lead upgrades and replacements of DC power plants, ensuring smooth transitions with no disruptions. Preventive Maintenance: Perform routine system maintenance, reporting, and documentation. Cabling & Connections: Run power cables, crimp lugs, lace wiring, and ensure secure system connections. Documentation: Prepare test reports, job records, and Method of Procedure (MOP) documents. Maintain detailed and accurate project files. Customer Interaction: Serve as the primary contact for clients, providing updates, handling inquiries, and ensuring overall satisfaction. AC Power Operations: Work with AC systems ranging from 120V single-phase to 480V three-phase while following strict safety protocols. Supervisory Duties: Oversee job sites, inspect tools/equipment, identify hazards, and enforce safety compliance. Lead daily safety meetings and mentor Level 1?2 technicians. Communication & Teamwork: Provide regular progress updates to supervisors. Collaborate effectively, practice active listening, and support team members in achieving project goals. Qualifications Technical Skills: Strong mechanical aptitude, communication, and organizational skills. Solid math ability. Proficiency in MS Office and customer-specific software. Experience: Significant hands-on experience with DC power systems, including installation, maintenance, troubleshooting, and knowledge of safety/industry standards. Travel & Physical Requirements: Ability to travel frequently (50% with overnight stays). Must be able to lift 50 lbs unassisted and up to 150 lbs with help. Comfortable with climbing, bending, and working in confined spaces. Compliance: Safety-first mindset with ability to pass drug screening, background check, DOT medical exam, and blood draw. Compensation & Benefits Paid weekly (every Friday) 9 paid holidays Paid on-the-job training Medical, dental, and vision insurance Employer-paid basic life & AD&D insurance Voluntary additional life insurance available Employer-paid short- and long-term disability Employee Assistance Program 401(k) with match and Safe Harbor employer contribution Up to 96 hours of paid time off annually Annual Christmas bonus Pay: $34-$38/hr