Repair technician jobs in Dracut, MA - 2,307 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Manufacturing Maintenance Technician Duration: 12 Months Job Type: Temporary Assignment Work Type: Onsite Shift: Day Shift Pay Range: $20.00 - $28.00 Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients worldwide. The job opportunity is for one of our clients specializing in biotechnology product development services. Our client is dedicated to supplying laboratory equipment, chemicals, supplies, and services essential in healthcare, scientific research, safety, and education. As the global leader in serving the field of science, our client boasts an annual revenue of around $40 billion with a mission to empower customers to make the world healthier, cleaner, and safer. Our client's global team is committed to delivering an unparalleled blend of cutting-edge technologies, convenient procurement options, and pharmaceutical services under their industry-leading brands. Summary: The Manufacturing Maintenance Technician II serves as a journeyman-level technician responsible for maintaining, troubleshooting, and improving automated production equipment. This role provides electrical, mechanical, and controls support while ensuring equipment safety, reliability, and optimal production performance in a manufacturing environment. Key Responsibilities: Ensure production equipment meets all safety regulations and industry standards. Identify and correct unsafe conditions involving electrical safety, guarding, interlocks, and emergency stops. Complete safety review checklists for new equipment and major process changes. Perform all tasks in compliance with site safety procedures (LOTO, hot work, confined space, etc.). Troubleshoot and repair automated production equipment to minimize downtime. Ensure spare parts are identified, stocked, and available for equipment support. Perform scheduled preventive maintenance and adjust PM requirements as needed. Train and mentor production associates on proper equipment operation and care. Assist in updating SOPs related to equipment use and processes. Identify and implement cost, quality, and reliability improvements. Support continuous improvement initiatives such as PPI and Lean activities. Ability to troubleshoot automated equipment, electronics, sensors, motors, servos, and pneumatics. Strong mechanical skills including disassembly, repair, and reassembly of complex equipment. Proficient use of hand and power tools. Working knowledge of mechanical, pneumatic, lubrication, electrical systems, and industrial automation. Understanding of general construction, repair, and facility maintenance. Knowledgeable and proficient in Good Documentation Practices (GDP). Proficient with PC applications including Outlook, Word, and Excel. Ability to use CMMS and inventory management software. Ability to communicate clearly with Work Centers, teams, and contractors professionally. Strong verbal and written communication skills for effective interpersonal interactions. Ability to work in diverse environments including office, laboratory, hazardous chemical production areas, clean rooms, general production floors, warehouses, outdoors, rooftops, mechanical spaces, and interstitial spaces. Must be able to climb ladders, work at elevated heights, regularly lift up to 50 lbs, and move 55-gallon drums using wheeled dollies. Must be able to work on-call when required. Required Skills High School Diploma required; Associate's or Vocational Degree in a mechanical or electrical discipline preferred. Associate's degree or vocational training in mechanical or electrical fields. Technical certifications in automation, controls, or industrial maintenance are a plus. 1-4 years of mechanical and/or electrical technical experience, or a combination of relevant education and experience. Experience supporting Lean Manufacturing or PPI initiatives. Experience writing or improving SOPs and technical documentation. Advanced troubleshooting of servos, PLCs, and automated systems. Experience working with automated production equipment in a manufacturing environment. TekWissen Group is an equal opportunity employer supporting workforce diversity.

The Shoe Repair Technician will report to the USA Shoe Repair Manager, Vibram Corporation, and will have primary responsibility for the Shoe Repair business segment, as well as act as limited interface with OEM shoe brands and manufacturers. Candidate will help coordinate and execute the marketing and operational activities of the shoe repair division. The candidate will assist management in product, promotion, merchandising, service, distribution and overall profitability of the product line and business segment. Candidates should have excellent verbal and written communication skills and digital marketing experience. Experience or knowledge in footwear and footwear construction is strongly preferred. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties as required: Assist Shoe Repair Manager in all aspects of the Shoe Repair business segment. Manage and respond to all CS/Inquiry related emails. Willingness to travel (up to 50%) across North America with some International travel required. Complete ownership of Mobile Innovation Labs (Inspection stickers, proper maintenance practices, inventory, etc.). Ability to drive and operate Mobile Innovation Labs (38' Recreational RV and 24' Box Truck). Logistical and onsite lead of all Shoe Repair related activations and events i.e. (clinics, Open Houses, etc.). Log all internal and external shoe repair projects in conjunction with Master Cobbler. Assist Master Cobbler with projects, inventory management, ordering, etc. Ability to learn and grasp aspects of footwear construction, manufacturing, and repair. Assist internal departments on shoe repair related projects/inquiries including but not limited to: Product Creation/Development, Sales, Marketing, Sports Marketing, Chem Lab, Operations, etc. Place sample orders on behalf of the Shoe Repair team and related projects or departments. Ability to lift ~50lbs. Ability to assist in digital marketing needs (newsletters, flyers, surveys, etc.). Sales experience (B2B and B2C). Marketing and digital marketing experience. Ownership of “Cobbler 4.0” Training Program (digital, outreach, customer service, etc.). Keep accurate inventory levels of all Shoe Repair related Point of Purchase items and identify fulfillment needs. Ability to navigate basic Excel and PowerPoint functions. Miscellaneous projects and tasks related to business segment. To perform the job successfully, an individual should demonstrate the following competencies: Excellent communication skills including written and verbal communication, listening, and a positive attitude. Accurately perceives information from others. Assures appropriate flow of information, and reports matters clearly, concisely, and accurately. Works diligently to improve overall skills through whatever means available. Maintains efficient and effective control of costs and utilization of resources. Develops good interdepartmental communication mechanisms for all departments. Demonstrate competent problem solving and negotiation. Must be detail oriented with a thorough understanding of marketing and advertising functions. Displays creativity and imagination. Explores new avenues, ascertains the value, and coordinates the development of a new plan or idea. Meets deadlines and can handle multiple projects at a time. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION/EXPERIENCE: Bachelor's degree preferred. 3+ years of experience. Must be a self-starter and able to work independently yet function as a key team member. Experience in retail, marketing, sales and/or consumer products, footwear and/or outdoor industry a plus. Knowledge and awareness of footwear and footwear construction/manufacturing. Vibram is a growth company looking for team members to grow with it. Vibram offers a generous total rewards package, casual work environment and a collaborative atmosphere for professional development. Vibram is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability.

*Our client is seeking **multiple Cabling Technicians* to support ongoing and upcoming projects across the Greater Boston area and Northern 495 Belt. These roles involve installing and maintaining structured cabling systems in fast-paced environments. The ideal candidates will have hands-on experience with cable pulling and termination, and a strong commitment to quality and safety. Key Responsibilities: * Pull and terminate Cat6 cables * Perform punchdown tasks * Install and maintain structured cabling systems * Work on construction sites as required * Maintain a positive attitude and strong work ethic Required Skills: * Cable pulling and termination * Cat6 cabling * Punch down techniques * Structured cabling installation * Telecommunications fundamentals * Ability to work in construction environments Top Skills: * Cabling * Installation * Construction experience * Professional attitude *Job Type & Location* *This is a Contract to Hire position based out of Andover, MA.* *Pay and Benefits* *The pay range for this position is $22.00 - $30.00/hr.* *Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave)* *Workplace Type* *This is a fully onsite position in Andover,MA.* *Application Deadline* *This position is anticipated to close on Jan 16, 2026.* *Job Type & Location*This is a Contract to Hire position based out of Andover, MA. *Pay and Benefits*The pay range for this position is $22.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Andover,MA. *Application Deadline*This position is anticipated to close on Jan 19, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

OVERVIEW: The Marine/Service Technician is responsible for the repair and overhaul of boats, machinery and trailers. KEY TASKS: Examine boat and discuss the nature and extent of damage or malfunction with the service advisor or customer. Perform diagnostics and repair of all types of marine engines and transmissions/drives/generators. Perform mechanical repair work such as: remove engine, transom or outdrive disassemble unit and inspect parts for wear overhaul or replace carburetors, blowers, generators, distributors, starters, pumps, electrical and fuel systems rebuild parts such as engine cylinder blocks rewire ignition system, lights and instrument panel replace and adjust taillights install and repair accessories such as radios, heaters, mirrors, and windshield wipers Operate a hydraulic jack or hoist as needed. Advise customers and/or insurance adjusters as to necessary repairs. Complete repair work utilizing service scheduler and SSO's within the established timeframe Ensure all warranty work is completed according to manufacture's and MarineMax guidelines Safely operate MarineMax and customer vessels during diagnostic water testing operations Maintain MarineMax tools in good condition and according to guidelines Other duties as assigned KEY RESULT AREAS: Internal/external customer satisfaction/FANS Timely and accurate completion of work Maintain 100% productivity MarineMax and its subsidiaries uses E-Verify, an Internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about E-Verify, including your rights and responsibilities.

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply here Factory Location: Framingham, MA Compensation: $40.00 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: 10:00 pm - 6:30 am; Sunday - Thursday Ability to work holidays and weekends per business needs Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment Other great benefits: Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits Responsibilities: Plan, lead and execute preventative maintenance (PM) according to PM schedule to mi BTBize equipment downtime Complete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural components Create retrofits and fabrication, complete machine tear down/repair and assembly and work on PLCs, VFDs, and electric motor Conduct creative problem solving to identify and perform equipment improvements Coach operators and peers on basic maintenance and equipment settings Participate in special project work on equipment upgrades or installations Work with team members and operators to ensure the daily production schedule is met Maintain partnerships with team members and vendors using effective communication Provide break relief to production operators or team members as needed Operate a forklift as needed to complete duties Qualifications: High School Diploma, GED, or equivalent work experience 3 or more years of previous maintenance experience in an industrial manufacturing environment Demonstrated sense of urgency in completing tasks and comfort working in a high-speed production environment Strong mechanical and electrical skills; PLC experience desired Solid computer skills, including the use of Word, Excel, Outlook Experience with CMMS or ERP systems needed; SAP experience preferred Ability to work independently or with a team and communicate effectively Solid problem solving and decision-making skills with the ability to coach others Able to lift 100 lbs. and pull 120 lbs. as needed while performing work Able to work with an awkward posture for 2 hours or more Ability to successfully complete an online skills assessment Successful completion of post offer physical, drug screen, and background check are required Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members . Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Pinehurst, NC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled MOV Technician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Perform MOV refurbish activities including preventative and corrective maintenance, actuator regrease, electrical equipment removal/installation, valve position limit switch setup on Motor Operator Actuators (Limitorque, Rotork, EIM etc.). Qualification, education, and experience requirements: Must have 3 years' experience in MOV refurbishment. Completion of a Motor operated valve training course and pass MOV TPE. Must have a high school diploma or equivalent. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

DEPARTMENT: Concord Police Department-Parking Division SHIFT: Tue-Sat 8am-7pm (the shift will be within these hours generally 10:30-7pm) APPLICATION INSTRUCTIONS: A City Application is required. Applications may be completed online at ****************** For more information on applying, please call the Human Resources Department at (voice) or TTY at or 7-1-1. ========================================================================= Be an ambassador for the City of Concord and Concord Police Department. While the POET does enforce parking rules and regulations, they do so much more. The POET is the face of City government on Main Street and in its neighborhoods. Come join the City's team. Earn at least $40,000 annually, with additional opportunities for more income via overtime. Enjoy an excellent, flexible, cafeteria style benefits plan for you and your family. Benefits include health, dental, and vision. In addition, upon vesting, you will be eligible for a retirement pension. Highschool diploma or GED, as well as valid driver's license require. No experience necessary. This position is responsible for enforcing parking rules and regulations within the City of Concord, as well as performing a variety of semi-skilled duties required to maintain, repair, and replace parking meters and kiosks pay stations used to manage the parking system. Ensures fair access to parking spaces in accordance with city ordinances. Expedites the orderly flow of traffic. Processes parking tickets and payments received. Collects, processes, and deposits payments from parking meters and kiosk pay stations. This position is not responsible for the direct supervision of other employees. A background check will be conducted for successful applicants following a contingent offer of employment. Examples of Duties Tickets motor vehicles that are in violation of city parking ordinances in a downtown walking area, in one of several mobile areas with timed zones, as well as in municipal parking lots and parking garages; tickets vehicles that are in violation of city parking ordinances regarding crosswalks, fire hydrants, no parking zones, handicap spaces, and fire lanes. Testifies in court regarding parking tickets which are appealed. Assists with the training of new personnel. Promptly, tactfully and respectfully answers questions from public regarding city parking ordinances and policies; gives directions within city and surrounding areas. Promptly, tactfully and respectfully responds to inquiries and complaints from citizens regarding illegally parked vehicles, citations or inoperable parking meters and kiosks; responds to inquiries and complaints in person, by telephone, or by email. Issues warnings in the form of adhesive stickers to vehicles with outstanding parking fines. Notifies Police Department Headquarters about citizen complaints, disabled vehicles, accidents, traffic problems, possible criminal activity, suspicious persons, etc. using portable radio and/or telephone. Locates vehicles due for immobilization; places immobilization device on vehicle; removes immobilization device from vehicles. Facilitates the towing of vehicles for violation of certain regulations and completes necessary paperwork. Substitutes for Reception-area staff, including interacting with the public, maintaining records relating to parking violations, answering the telephone, collecting fines, and operating various office equipment. Assists with directing traffic. Sets up barricades, cones and signage as needed. Maintains supplies and equipment needed to perform job, including stocking vehicles, portable radio, ticket supplies, and portable computer. Occasionally works overnight shifts (generally 11:00 PM to 7:00 AM) for enforcement of winter parking bans as needed. Observes and monitors parking facilities for suspicious, inappropriate, or illegal activities. Promptly takes appropriate action to respond to said activities. Directly interacts with the public to address minor inappropriate activities and behavior such as, but not limited to, loitering or bicycling / skateboarding within parking garages. Immediately reports all suspicious persons or activities, uncooperative / unruly persons, illegal activities, or any other activities potentially threatening health or safety to Police Department Headquarters for law enforcement response. Observes and monitors parking facilities for cleanliness, vandalism, burnt out lights, missing / damaged street signs and parking signage, broken or damaged meter poles, property damage, or other obvious maintenance needs. Promptly reports all such items to the General Services Department via the City's web based "Report a Concern" portal at ****************** Observes and monitors construction activities and other encumbrances within parking spaces. Verifies that said activities have secured the required Parking Encumbrance Permits from the City Parking Division in accordance with the City's Code of Ordinances. Collects money from several hundred single-space parking meters and multi- space parking kiosks, processes, records and deposits monies with the City Collections Office. Maintain and monitors daily meter repair log and complaint records. Performs preventative maintenance to parking meters and multi space kiosks as scheduled by the Parking Supervisor. Inspects meters and parking kiosks for malfunctions or vandalism. Clears coin jams and removes foreign objects in coin assemblies. Dissassembles meters and kiosks as needed to conduct tests, adjust, or otherwise clean / repair / replace faulty or damaged components. Reassembles units once maintenance is complete. Dissassembles old meters and kiosk units removed from service; harvest and store salvageable components. Reconditions meters and kiosks as directed. Transports and disposes of obsolete equipment at appropriate disposal facilities as directed by the Parking Supervisor. Cleans meters and kiosk pay station housings; remove stickers and graffiti as required. Sands, cleans, primes, and paints meter and kiosk housings. Replace decals and signage for meters and kiosk pay stations as required. Updates maintenance logs for meters and kiosk pay stations as developed by the Parking Supervisor. Keep the Parking Supervisor informed of availability and condition of all tools, parts, or supplies required for meter and kiosk maintenance / repair / replacement. Typical Qualifications Education and Experience: High school graduate or its recognized equivalent. Any combination of education, training and experience which provides the knowledge, skills and abilities required for the job. Licenses and Certifications: Valid State of New Hampshire Driver's License. Supplemental Information Knowledge of: City of Concord's basic geography including locations of neighborhoods and streets. All parking rules, ordinances, and regulations of the city. Operation of the handheld computer used for generating and logging parking tickets as well as tracking meter maintenance. Principles of safe and effective operation of a motor vehicle. Safe and effective operation of standard office equipment and computer programs. Operation of parking meters used by the city. Basic spoken and written English. Care and use of standard hand tools and equipment. Basic arithmetic principles. Skill in: Fixing jams and performing minor maintenance on parking meters and kiosks. Safe and effective operation of a motor vehicle. Interacting tactfully and effectively with other employees and the public. Operating a handheld specialized computer and smart phone. Mental and Physical Abilities to: To perform the duties outlined herein. Tactfully and effectively interact with and instruct the public. Effectively and accurately enter data into a handheld computer. Safely and effectively operate a motor vehicle. Work effectively in extremes of outdoor environment. Use basic hand tools and equipment. Physical ability to lift 35 pounds. Stamina to perform considerable walking, standing, and driving. Have arm, hand, and finger dexterity, with both hands, for handling and feeling. Good hearing and eye sight. Work alone during most of the day, and under only general instructions and supervision. Tolerate repetitive, short-cycle work. Occasionally team-lift very heavy weights safely. Perform duties while standing or walking. Occasionally lift light and heavy objects. Distinguish between shades of color. Working Conditions: Work is performed in a very noisy place. Work is performed outdoors in hot, cold and inclement weather. The employee is exposed to exhaust fumes, dust, and pollen. Working any hours typically between Monday - Saturday 8:00am-7:00pm Our organization is committed to ensuring fair treatment, access, and opportunities for all individuals regardless of race, ethnicity, gender, sexual orientation, ability, socioeconomic status, age, religion or other social identities in accordance with state and federal law. We recognize that each individual brings a unique perspective that is informed by their life experience and identity. Our organization is committed to recruiting and retaining the best qualified individuals based on a holistic review of their knowledge, skills, experience, understanding, communication and abilities.

Cumberland Farms is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America's #1 'one-stop' destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: Competitive Wages Work today, get paid tomorrow through our earned wage access program* Paid Time Off Medical/Health/Dental Coverage 401K with Company Match Team Member Discounts Tuition Reimbursement Employee Assistance Program Health Savings Account Company Spirit Days Employee recognition and awards And much more! Position Summary: The Maintenance Mechanic will be responsible for the preventative and reactive maintenance of all equipment throughout the Plant. Responsibilities: Ability to troubleshoot PLC issues, VFD drive issues, HMI, conveyors. Read electrical schematics effectively Estimate labor and material costs for replacement, repair, alterations and improvements of Plant equipment Account for parts inventory and report to Supervisor or Manager Perform installation of pneumatic, mechanical, and electronic equipment. Perform the maintenance and repair work of Plant equipment and facility up keep Respond to emergency site maintenance as required, confer and advise Plant Manager and other personnel regarding maintenance projects and priorities. Performs preventative maintenance such as oiling and greasing to include repairing faulty electrical wires, replace fuses, and replace damaged parts within the Plant equipment. Monitor equipment for proper working conditions and usage. Responsible for practicing and maintaining food safety Perform related duties and responsibilities as assigned by the Maint. supervisor or Manager by the established completion dates. Train equipment operators Working Relationships: This position requires significant interaction with the Plant Manager, Quality Assurance Manager, Production and Sanitation Supervisor in order to communicate maintenance needs of the Plant equipment. Requirements Minimum Education: Trade High School Diploma or equivalent. Preferred Education: Associates degree in related discipline. Minimum Experience: 2 years of experience as an Equipment Maintenance Technician. The candidate must have some mechanical and electronics training. Also, must be able to follow equipment manufacturer drawings/sketches and instructions. . Preferred Experience: 3 years of experience working as an Equipment Maintenance Technician. Should have knowledge of electronics, interpreting of schematics, pneumatic systems and ability to work from equipment manufacturer drawings/sketches and instructions. Should have a valid 2nd class fireman license. Licenses/Certifications: N/A Soft Skills: Good written and verbal communication skills. Ability to interact with all levels of management and personnel within the organization and external contacts. Ability to work independently and prioritize multiple tasks. Other: Travel: None Hours & Conditions: Must be available to work weekdays from 5:00 am to 6:00 pm and Saturday. Additional shifts as needed. Physical Description: Type of Movement: Frequency of Movement: Sitting Occasional Standing Frequently Walking Frequently Stooping Occasional Kneeling Occasional Pushing Occasional Pulling Occasional Climbing Occasional Crouching Occasional Crawling Occasional Reaching Constantly Lifting Constantly Twisting Constantly Bending Constantly Frequency Classifications Occasional is defined as up to one-thirds of the time. Constantly is defined as occurring more than two-thirds of the time Frequently is defined as occurring one-third to two-thirds of the time $23.41-$31.21 Wage $23.41-$31.21 Additional Info At EG America, it's important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced corporate environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement. Consistent with Massachusetts Pay Transparency Law, we're sharing the base salary range for this position. Final pay within this range will be based on your skills, experience, and qualifications. Base pay represents just one part of our total rewards approach. We're proud to offer a variety of financial and non-financial benefits that invest in your overall growth, well-being, and career journey.

Service Technician - Every day is an opportunity for you to turn an apartment into a home. #WRK4UDR. UDR, Inc. and its affiliated companies are seeking a Service Technician to join our team at 100 Pier 4, our apartment community (369 homes) located in Boston, MA. Key Qualifications: Technical of vocational certificate and/or degree preferred. Minimum of two years of experience in building and mechanical maintenance including plumbing, electrical, appliance repair painting and drywall. Knowledge and experience of HVAC and carpentry a plus. EPA Type II or Universal certification preferred. Valid driver's license and rotating on-call responsibility required. Some locations require certification in pool operation (CPO). Essential Job Functions: Respond to resident requests for maintenance and service by taking appropriate action to repair and/or restore service within the quality and time standards established by the organization. Maintain the overall appearance and cleanliness of the community by ensuring that grounds, amenities, building exteriors/interiors, market ready units, breezeways, curbs, signage, leasing office, central garbage areas, parking lots and other buildings and common areas are free of debris, trash, graffiti, and other items which affect the appearance of the community. All deficiencies and or risk management safety issues are reported immediately. Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, appliance repair, and other miscellaneous equipment maintenance and repairs, as well as carpet cleaning, painting, and overall apartment cleaning or other activities as necessary or as directed. Maintain tools, equipment, and workspace and ensure they are organized and in proper working order, request replacements as necessary, and assist in stocking the inventory. Provide superior customer service to internal and external customers. Perform other duties as assigned or as necessary. Exceptional Benefits: We offer a comprehensive benefit package and discounts to live in our premier communities! UDR, Inc., an S&P500 company, is one of the nation's largest owners and managers of residential apartment communities with a mission of offering remarkable apartment homes in the most desirable locations throughout the United States. Share your expertise, skill and commitment to excellence with us, and be a part of UDR's team. #WRK4UDR Pay: $22-$26/hr. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Mobile HVAC / Maintenance Technician What this job involves: The HVAC Service Technician performs annual preventive maintenance and hands-on repair work within a specified geographic territory. You'll maintain various building systems according to JLL standards, including HVAC, mechanical, electrical, plumbing, building automation, card access, doors, gates, building envelope, grounds, parking lots, interior finishes, lighting, and other commercial property operations. Your day-to-day tasks will include: Performing preventive maintenance and repair services on HVAC, mechanical, plumbing, electrical, and various building systems Identifying energy savings opportunities through system and operational improvements Planning work assignments independently with minimal direct supervision Traveling to multiple locations within your assigned territory in a company vehicle Communicating with team members via phone, email, and in-person Desired experience and technical skills: Requirements: Minimum 3 years' experience in commercial HVAC service and repairs (or 5 years military experience with HVAC systems) Universal CFC certification High school diploma or GED Hands-on skills with commercial HVAC systems, pumps, motors, air handlers, controls, and electrical systems Strong English language skills including grammar and composition Location: On site. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Estimated compensation for this position: 72,800.00 - 83,200.00 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: On-site -Boston, MA If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our Supplemental Privacy Statement which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

Experience level: All Experience Level Experience required: 3 Years Education level: High school or equivalent Job function: Manufacturing Industry: Aviation & Aerospace Visa sponsorship eligibility: No We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay Depend on Experience. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Perform repairs on various products. Duties will include investigation of customer complaints, troubleshooting/repair of failures to board level/sub-assembly and documentation of repairs in ERP system. Essential Functions Work within limits of prescribed procedures to ensure accurate completion of unit repair Document repairs made and parts used in our ERP system Troubleshoot problems to board level or sub-assembly to determine root cause of failure Perform mechanical and software upgrades Collaborate with QA Engineers as required on details of complaint investigation Ability to efficiently transition between product lines Required/Preferred Education and Experience Technical High School or College Level technical training preferred 3+ years of technical troubleshooting/repair experience preferred Knowledge, Skills and Abilities Computer literate, familiar with MS Windows, Word, Excel, Etc. Read and understand SOPs and work instructions Read and understand diagnostic data Familiarity with test equipment (e.g. patient simulators, oscilloscopes, signal generators, and other test equipment) Navigate ERP systems effectively

We're looking for a Technical Lead to join our Product Engineering team at our HQ in Kendall Square. This is a fantastic opportunity to work with an amazing team and make a real and immediate impact for our members and users. What you'll be doing: Build and test features for a rapidly growing consumer-facing application. Take a lead role in steering architecture to scale technology and process to a high scale and quality. Work closely with stakeholders in various internal groups to help balance delivery speed and quality. Mentor and train junior developers to maximize team velocity. About you and your skills: Customer focused outlook on software design. 5+ years building out maintainable applications with modern programming languages such as Java and Javascript Experience building solutions for AWS (or other cloud services) Experience working with distributed systems (microservices) Experience with containers and container orchestration systems a plus! Benefits: We pay 100% of the cost of both your medical and dental premiums directly to the insurance companies Establish an HSA to cover any out-of-pocket expenses you may incur that are not covered by the insurance Employee parking/MBTA costs Host lots of fun all-company events Fully stocked kitchen

JLL (NYSE: JLL) is a leading professional services firm that specializes in real estate and investment management. A Fortune 500 company, JLL helps real estate owners, occupiers and investors achieve their business ambitions. In 2016, JLL had revenue of $6.8 billion and fee revenue of $5.8 billion and, on behalf of clients, managed 4.4 billion square feet, or 409 million square meters, and completed sales acquisitions and finance transactions of approximately $145 billion. At the end of the second quarter of 2017, JLL had nearly 300 corporate offices, operations in over 80 countries and a global workforce of more than 80,000. As of June 30, 2017, LaSalle Investment Management had $57.6 billion of real estate under asset management. JLL is the brand name, and a registered trademark, of Jones Lang LaSalle Incorporated. For further information, visit ************ Job Description The Site Regulated Services Lead/Quality Technician will have a primary focus on overseeing select site services which require additional oversight due to the regulated environment, including but not exclusive of GMP cleaning and pest control. The person in the role will strive toward innovation, assist in lowering cost of delivery and work with suppliers to integrate the service into operations while dramatically enhancing the customer experience. The Regulated Services Lead will collaborate with Quality Assurance and the client to ensure effective participation in and adherence to quality programs. They will drive towards a higher level of cleanliness as well as achieve minimum scoring metrics as stipulated in both Client and Vendor contracts. The candidate will have a proven career history of successfully managing change and GMP/Quality experience. This position reports directly to the Site Facility Manager. ESSENTIAL FUNCTIONS Understand and ensure compliance in GMP space Customer Focus: Be a true innovator and genuine service-oriented individual to continuously monitor established quality procedures and resolve internal quality issues and customer complaints concerning product and or service dissatisfaction. Communication: Directly interface, both verbally and written, with client vendors, and JLL Management Compliance: Stay current with all Client, Federal and State regulations/codes, comply with specifications, and ensure standards are met. Support Quality Assurance to include training, assigning tasks, performance appraisals, conducting investigations, assisting with CAPAs, and monitor procedures to ensure processes are completed in an efficient and safe manner, and within the scope of policies and procedures. Perform/support audits and prepare SOP's and training materials. Provides information to Vendors, Facilities staff and Service Providers as required to ensure that quality assurance expectations are communicated, understood and followed. Inspections: Participate in the creation and implementation of inspections and other quality practices and procedures.. These inspections should serve as an assurance of quality as measured by client surveys. Provide leadership and direction to advance service quality and enhance the client partnership to continuously improve operations and influence the behavior of all employees. Supplier Performance Management: Deliver high quality, creative, and cost-effective solutions. Monitor work requests to trend vendor performance. Raise the bar in vendor quality and service while reducing overall costs. Work with IFM managers to hold vendors accountable for delivering high quality service per contract expectations, partnering with vendors to continuously improve service quality and improvement plans, and resolve/troubleshoot service issues at the site level. Analytical capability: Analyze trends and utilize data to anticipate and proactively address issues in the environment. Financial Acumen: Challenge year-over-year cost increases and proactively identify ways to reduce “process waste” and costs. Qualifications EDUCATION AND EXPERIENCE Bachelor's degree in Engineering, Mathematics, Science or another relevant field is desired but not required; experience in lieu of degree will be considered. 5 years of GMP or ISO 9000 experience in manufacturing. Experience in pharmaceutical manufacturing preferred. Must have proven, successful GMP or Quality Compliance/Assurance experience working with vendors performing services in GMP space GMP PEST CONTROL PROGRAM Proven capabilities on addressing and remediating pest sightings and investigations in a GMP Manufacturing Facility. Ability to establish rationales on Pest Control Best Practices. Ability to prepare and analyze Pest Control Trend Reports, subject to Regulatory Agency review. Experience in auditing GMP Pest Control Programs. Some knowledge in entomology and common insect behavior. GMP | CLEAN ROOM JANITORIAL AND SANITIZATION PROGRAMS Strong Knowledge of Environmental Controls of GMP Clean Rooms. Strong understanding of Regulatory Expectations. Ability to recommend, frequency and propose recommended dilutions of cleaning detergents for specific needs and situations. Develop cleaning procedures, work instructions and log forms in compliance with regulatory expectations. Train on Cleaning Methods and Procedures. Proven capabilities on addressing and remediating investigations related to Environmental Monitoring excursions as it related to a cleaning/disinfection programs. Ability to recognize when a GMP Change Control is required when proposing new cleaning methods, detergents and consumables. KNOWLEDGE, SKILLS, AND ABILITIES Must possess strong interpersonal skills with the ability to build rapport quickly Knowledge of Quality Engineering techniques, CMMS systems, and Quality Management Systems Exhibit excellent written and verbal communication skills Ability to analyze reports for the purpose of ensuring compliance with scope of work Excellent PC skills: proficient in all MS applications, especially Excel, Word, PowerPoint, Visio Speak, read and write fluent Englis Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description About the Role: The Lead Service Technician plays a critical role in ensuring the efficient operation and maintenance of equipment and systems within the organization. This position is responsible for leading a team of service technicians, providing technical expertise, and ensuring that all service tasks are completed to the highest standards. The Lead Service Tech will coordinate service schedules, troubleshoot complex issues, and implement solutions that minimize downtime and enhance system performance. This role requires a proactive approach to identifying potential problems and mentoring junior technicians to develop their skills. Ultimately, the Lead Service Technician ensures customer satisfaction through timely, effective service delivery and continuous improvement of service processes. Minimum Qualifications: High school diploma or equivalent; technical certification or associate degree in a relevant field preferred. Minimum of 5 years of experience in a service technician role with demonstrated technical proficiency. Proven experience leading or supervising a team in a technical or service environment. Strong knowledge of mechanical, electrical, and electronic systems relevant to the industry. Valid driver's license and ability to travel to customer sites as required. Preferred Qualifications: Certification in specialized equipment or systems relevant to the company's service offerings. Experience with computerized maintenance management systems (CMMS) or similar software. Advanced troubleshooting and diagnostic skills using modern tools and technology. Formal leadership or management training. Experience working in a customer-facing role with strong communication skills. Responsibilities: Lead and supervise a team of service technicians in daily operations and service calls. Diagnose, troubleshoot, and repair complex mechanical, electrical, or electronic equipment issues. Develop and implement preventive maintenance plans to reduce equipment failures and downtime. Coordinate service schedules and manage resources to meet customer and organizational needs. Provide technical training and mentorship to junior technicians to enhance team capabilities. Maintain accurate service records, reports, and documentation in compliance with company policies. Collaborate with other departments to improve service processes and customer satisfaction. Ensure compliance with safety regulations and company standards during all service activities. Skills: The Lead Service Technician utilizes strong technical skills daily to diagnose and resolve complex equipment issues efficiently, ensuring minimal disruption to operations. Leadership and communication skills are essential for managing the service team, coordinating schedules, and providing clear guidance and training to junior technicians. Problem-solving abilities are applied continuously to develop preventive maintenance strategies and improve service processes. Organizational skills are critical for maintaining accurate records and managing multiple service requests simultaneously. Additionally, proficiency with diagnostic tools and software enhances the technician's ability to deliver timely and effective solutions, contributing to overall customer satisfaction.

Our customer is looking to add multiple resources to the team to support ongoing and upcoming projects, there is a large project in Manchester NH that needs support. We are looking for techs with experience in the structured cabling. At least 6 months of experience with punch downs, terminations and cable running in commercial buildings is necessary. *Skills* Cabling, Install, Construction, attitude, Cat6, Punchdown, Cable puller, Structured cabling, Cable tech, Telecommunication *Top Skills Details* Cabling,Install,Construction,attitude *Additional Skills & Qualifications* Must be reliable and willing to drive to the sites with own vehicle while on contract *Experience Level* Entry Level *Job Type & Location*This is a Contract to Hire position based out of Lawrence, MA. *Pay and Benefits*The pay range for this position is $18.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Lawrence,MA. *Application Deadline*This position is anticipated to close on Jan 20, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

JLL (NYSE: JLL) is a leading professional services firm that specializes in real estate and investment management. A Fortune 500 company, JLL helps real estate owners, occupiers and investors achieve their business ambitions. In 2016, JLL had revenue of $6.8 billion and fee revenue of $5.8 billion and, on behalf of clients, managed 4.4 billion square feet, or 409 million square meters, and completed sales acquisitions and finance transactions of approximately $145 billion. At the end of the second quarter of 2017, JLL had nearly 300 corporate offices, operations in over 80 countries and a global workforce of more than 80,000. As of June 30, 2017, LaSalle Investment Management had $57.6 billion of real estate under asset management. JLL is the brand name, and a registered trademark, of Jones Lang LaSalle Incorporated. For further information, visit ************ Job Description The Site Regulated Services Lead/Quality Technician will have a primary focus on overseeing select site services which require additional oversight due to the regulated environment, including but not exclusive of GMP cleaning and pest control. The person in the role will strive toward innovation, assist in lowering cost of delivery and work with suppliers to integrate the service into operations while dramatically enhancing the customer experience. The Regulated Services Lead will collaborate with Quality Assurance and the client to ensure effective participation in and adherence to quality programs. They will drive towards a higher level of cleanliness as well as achieve minimum scoring metrics as stipulated in both Client and Vendor contracts. The candidate will have a proven career history of successfully managing change and GMP/Quality experience. This position reports directly to the Site Facility Manager. ESSENTIAL FUNCTIONS Understand and ensure compliance in GMP space Customer Focus: Be a true innovator and genuine service-oriented individual to continuously monitor established quality procedures and resolve internal quality issues and customer complaints concerning product and or service dissatisfaction. Communication: Directly interface, both verbally and written, with client vendors, and JLL Management Compliance: Stay current with all Client, Federal and State regulations/codes, comply with specifications, and ensure standards are met. Support Quality Assurance to include training, assigning tasks, performance appraisals, conducting investigations, assisting with CAPAs, and monitor procedures to ensure processes are completed in an efficient and safe manner, and within the scope of policies and procedures. Perform/support audits and prepare SOP's and training materials. Provides information to Vendors, Facilities staff and Service Providers as required to ensure that quality assurance expectations are communicated, understood and followed. Inspections: Participate in the creation and implementation of inspections and other quality practices and procedures.. These inspections should serve as an assurance of quality as measured by client surveys. Provide leadership and direction to advance service quality and enhance the client partnership to continuously improve operations and influence the behavior of all employees. Supplier Performance Management: Deliver high quality, creative, and cost-effective solutions. Monitor work requests to trend vendor performance. Raise the bar in vendor quality and service while reducing overall costs. Work with IFM managers to hold vendors accountable for delivering high quality service per contract expectations, partnering with vendors to continuously improve service quality and improvement plans, and resolve/troubleshoot service issues at the site level. Analytical capability: Analyze trends and utilize data to anticipate and proactively address issues in the environment. Financial Acumen: Challenge year-over-year cost increases and proactively identify ways to reduce “process waste” and costs. Qualifications EDUCATION AND EXPERIENCE Bachelor's degree in Engineering, Mathematics, Science or another relevant field is desired but not required; experience in lieu of degree will be considered. 5 years of GMP or ISO 9000 experience in manufacturing. Experience in pharmaceutical manufacturing preferred. Must have proven, successful GMP or Quality Compliance/Assurance experience working with vendors performing services in GMP space GMP PEST CONTROL PROGRAM Proven capabilities on addressing and remediating pest sightings and investigations in a GMP Manufacturing Facility. Ability to establish rationales on Pest Control Best Practices. Ability to prepare and analyze Pest Control Trend Reports, subject to Regulatory Agency review. Experience in auditing GMP Pest Control Programs. Some knowledge in entomology and common insect behavior. GMP | CLEAN ROOM JANITORIAL AND SANITIZATION PROGRAMS Strong Knowledge of Environmental Controls of GMP Clean Rooms. Strong understanding of Regulatory Expectations. Ability to recommend, frequency and propose recommended dilutions of cleaning detergents for specific needs and situations. Develop cleaning procedures, work instructions and log forms in compliance with regulatory expectations. Train on Cleaning Methods and Procedures. Proven capabilities on addressing and remediating investigations related to Environmental Monitoring excursions as it related to a cleaning/disinfection programs. Ability to recognize when a GMP Change Control is required when proposing new cleaning methods, detergents and consumables. KNOWLEDGE, SKILLS, AND ABILITIES Must possess strong interpersonal skills with the ability to build rapport quickly Knowledge of Quality Engineering techniques, CMMS systems, and Quality Management Systems Exhibit excellent written and verbal communication skills Ability to analyze reports for the purpose of ensuring compliance with scope of work Excellent PC skills: proficient in all MS applications, especially Excel, Word, PowerPoint, Visio Speak, read and write fluent Englis Additional Information All your information will be kept confidential according to EEO guidelines.

We are seeking cable technicians for ongoing low voltage projects across the state of MA, we will needs techs to have basic hand tools, reliable transportation, as well as the willingness to learn. *Job Type & Location*This is a Contract position based out of Woburn, MA. *Pay and Benefits*The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Woburn,MA. *Application Deadline*This position is anticipated to close on Jan 19, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.