Repair technician jobs in Michigan - 3,336 jobs

This position will report to the Service Manager. The responsibilities of the Service Technician are to service, maintain, troubleshoot, and repair heating, ventilation, air conditioning, refrigeration systems and equipment. Diagnosing malfunctions and determining repair needs, inspecting, and performing tests on systems and equipment for defective parts and to assure proper functioning. Essential Job Function Customer Service Always present a professional positive and helpful attitude when interacting with customers and co-workers. Exhibit an understanding of Human Relations and functions as a “team player”. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills. Observe additional maintenance needs requiring attention and report to the appropriate people. Basic Functions/Requirements Read and write English. Write legibly. Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax) Must have valid Michigan drivers' licenses, good driving record (our insurance must accept you) Paperwork filled out properly daily, including electronic documentation, if applicable. Follow verbal and written instructions. Follow all safety rules. Be able to wear all P.P.E's when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.) Lift, climb, bend, and kneel to complete assigned tasks. Tolerate working at heights off a ladder, scaffold, and aerial lifts. Perform heavy physical labor during adverse weather conditions. Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.E's. Maintain cooperative and effective working relationship with others. Be able to take “on call” in the regular rotation. Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends, and holidays) 4 hours safety training required annually. Must have refrigerant transition and recovery certification card. Continuing education is expected. Education/Experience High school diploma or GED preferred. 10+ Years' experience preferred. Work Coordination and Paperwork Coordinate start and stop time with Service Dispatcher for each call. Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket, paper or electronic, for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required. Obtain record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies. Physical Requirements Climbing (ladders, stairs, etc.) while carrying tools and parts Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance Bending or stooping Extended periods of walking Regular exposure to weather conditions Operating a motor vehicle Owning and operating power or hand tools Exposure to potentially harmful chemicals or materials with proper P.P.D's Non-Essential duties and responsibilities Performs other duties as assigned by Management.

Multi-Trade Maintenance Technician Pay: Up to $39.47/hour (based on experience) Sign-On Bonus: $1,500 Join Worthington Steel, a global leader in metals manufacturing, as we power innovation across automotive, construction, energy, and agriculture markets. We're looking for a skilled Multi-Trade Maintenance Technician to help keep our high-performance production operation running safely and efficiently. Why You'll Love It Here At Worthington Steel, people come first. Guided by the Golden Rule, we treat others the way we want to be treated. You'll join a team-oriented, growth-driven culture where your skills are valued and your career can thrive. Pay & Schedule Hourly Pay: Up to $39.47/hour (based on experience) Shift Premiums: +$1.50/hour for 2nd shift | +$1.00/hour for 3rd shift Sign-On Bonus: $1,500 Shifts: Afternoons (3 pm-11 pm) and Evenings (11 pm-7 am) Schedule: 10 days on / 4 days off - full-time hours with extended breaks Key Responsibilities Troubleshoot and repair electrical, mechanical, hydraulic, and pneumatic systems Program and maintain Allen Bradley PLCs and HMIs Perform preventive and predictive maintenance Handle welding, fabrication, and equipment upgrades Maintain accurate logs in the CMMS system Champion safety and reliability every day Qualifications Minimum 2 years of industrial maintenance experience (manufacturing preferred) Strong knowledge of PLCs (Allen Bradley), ladder logic, and control systems Proficiency in mechanical repair, welding, and fabrication Familiarity with hydraulics, pneumatics, and industrial safety standards Preferred: Technical degree or trade school certification in Industrial Maintenance or related field Certifications such as Lockout/Tagout, Fall Protection, Confined Space, PPE, CPR/First Aid, or OSHA 10/30 What We Offer Competitive pay with overtime and shift differentials Quarterly profit-sharing bonuses Comprehensive benefits (medical, dental, vision) effective Day 1 401(k) with company match Paid training and certification opportunities Modern facility with cutting-edge automation A culture that values safety, innovation, and career growth Join a company that invests in your future - and treats you like family. Apply today to grow your career with Worthington Steel.

We are seeking a hands-on Test Technician to support a manufacturing operation producing electrical equipment. In this role, you will perform testing and verification throughout the manufacturing process to ensure products meet drawings, specifications, and customer requirements. This is a shop-floor role ideal for technicians with manufacturing and electrical experience who are comfortable reading prints, using meters, and verifying electrical builds. Key Responsibilities Perform electrical and functional testing on equipment during various stages of manufacturing Verify materials, wiring, and assemblies against drawings and specifications Use meters and basic test equipment to confirm proper electrical performance Identify issues or discrepancies and recommend solutions Accurately document test and inspection results Ensure adherence to electrical standards and customer requirements Collaborate with production, quality, and engineering teams to resolve issues Basic Qualifications Ability to read and understand one-lines, schematics, and ladder diagrams Experience verifying electrical components using meters Ability to review engineering drawings and specifications for conformance 3+ years of experience in a manufacturing environment Preferred (Not Required) Journeyman Electrician or similar background Experience in commercial, industrial, or facilities electrical work Exposure to electrical standards (UL, ETL, CSA, NEC) Familiarity with manufacturing documentation and basic computer systems (ERP/MRP, Microsoft 365) Strong attention to detail and problem-solving skills

About Ace Retail Group Ace Retail Group (ARG), is a division of Ace Hardware Corporation that owns and operates several Ace brands, including Westlake Ace, Great Lakes Ace, Buikemas Ace, Outer Banks Ace, Dennis Company, and Breed & Company.ARG is one of the largest hardware retailers in the United States and has two headquarters located in Lenexa, KS and Farmington Hills, MI.ARGs origins date back over a century and operates over 250 neighborhood stores located throughout the United States.Great people make ARG stand out in our industry, and we are looking for individuals who strive for personal and professional growth, and who want to work with a company founded on (and still led by) our solid Core Values of: Winning, Excellence, Love, Integrity, Gratitude, Humility and Teamwork. Great Lakes Ace Hardware is growing and expanding! We are looking to add friendly faces to our existing team! The ideal candidate for the STIHL Technician Position will be mechanically inclined and have experience in small engine repair and equipment maintenance, preferably with STIHL power equipment. The preferred candidate will have the ability to show consumers how to properly use a wide variety of STIHL power equipment. In addition, this candidate will be responsible for maintaining outstanding customer service, generate sales, merchandise product, own assigned departments and support the store management team. ESSENTIAL DUTIES AND RESPONSIBILITIES Equipment Repair: Ensures equipment is repaired, safe, and ready to process. Orders repair parts as needed for equipment repair Ensures proper check in and check out of equipment Maintains repair schedule and regular maintenance schedules for all STIHL equipment Identifies and notifies management of any pricing irregularities in the system Customer Service & Sales: Ensures customers are provided with the highest levels of customer service. Greets all customers and assists in answering questions about merchandise and locating merchandising; uses The S.A.L.E.S. process to help customers find everything on their lists. Completes all company and departmental paperwork accurately, including Price Change Bulletins, Operation Actions, Red Tags, and Bin Tags. Receives, opens, and unpacks cartons or crates of merchandise, checking paperwork against items received when required, and replenishes stock when necessary. Displays and maintains merchandise on end caps, shelves, counters or tables following company plan-o-gram, building displays when necessary to attract customers and promote sales within specified guidelines by your management team. Maintains on-hand integrity through inventory adjustment reports including; cycle count, negative on-hand. Follows the nightly maintenance checklist to ensure proper store recovery and cleanliness. Maintains familiarity with new products and ad merchandise. Has sound awareness of surroundings, customers, etc. and practices loss prevention techniques to minimize shoplifting losses. Working knowledge of the tools available to operate the store; including, but not limited to: RF Gun, Back Office Procedures and the use of Store Opportunities. Follows GLA policies and procedures for all transactions. Engages the customer to ensure they are receiving all the benefits of being an Ace Rewards member and actively seeking participation from them. Must be able to communicate effectively, and work with colleagues and customers effectively and professionally. ADDITIONAL DUTIES AND RESPONSIBILITIES Assists with color matching and mixing paint Operates cash register by scanning all merchandise, engaging the customer through suggestive selling, proper tendering of each transaction, and thanking the customer for shopping at GLA. Adhere to all company policies. Participates in periodic team meetings. A continuous pattern of regular and prompt attendance is required along with the ability to work a flexible schedule including weekends. Compensation Details $15 For a full list of benefits and open positions, please visit us at: ************************************************************ Want to be notified when new jobs are posted? Follow the link below to create an account and set up custom job alerts: Create Job Alert Equal Opportunity Employer Ace Retail Group is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military discharge, or any other action covered by federal or state laws. Required Preferred Job Industries Retail

Join America's most trusted brand with over 100 years of service. Why Choose AAA The Auto Club Group (ACG) ACG offers excellent and comprehensive benefits packages: Medical, dental and vision benefits 401k Match Paid parental leave and adoption assistance Paid Time Off (PTO), company paid holidays, CEO days, and floating holidays Paid volunteer day annually Tuition assistance program, professional certification reimbursement program and other professional development opportunities AAA Membership Discounts, perks, and rewards and much more A DAY IN THE LIFE of a Field Insurance Service Representative The Auto Club Group is seeking a Field Insurance Service Representative who will provide a high level of support to the Insurance Agency and members by servicing existing insurance accounts. Perform retention calls, process applications, renewals, amendments, resolve customer problems, as well as selling membership and financial products (credit cards) Provide price quotes on all insurance products and factor in all applicable rules (underwriting, business, etc.) and discounts to complete the sale Take insurance payments (initial, installment, lapse, or reinstatement) Respond to customers' insurance inquiries and explains product features and Auto Club Group service advantages to potential customers for the purpose of promoting and selling various insurance, membership, and financial products Refer to agent when appropriate Recognize and promote cross-sale opportunities within the context of servicing a change to an existing member's policy and provide efficient processing of customer policies, endorsements, and status and coverage changes in accordance with state rules and corporate policies and procedures Provide customer assistance through the performance of sales processing activities and assists management and agents when applicable Conduct outbound promotional and retention call activities per management request and provides general promotion of Auto Club Group products and services following established guidelines Participate in a team environment to promote customer satisfaction and consistent service following the customer service model Receive and resolve member/customer complaints and seeks assistance from management in complaint resolution as necessary Participate in office events developed to generate insurance revenue, improve member awareness of products, and support local community activities Fulfill, maintain and service insurance policies Respond to inquiries regarding insurance availability, eligibility, coverage. Prepare insurance proposals, policy changes, transfers, and billing clarification Contact members or insureds regarding the renewal of delinquent memberships, late premium payments and to solicit reinstatements in the event of policy cancellations Verify new business applications Refer relevant members/insureds to other lines of business (i.e. Travel and Life) Process insurance and membership payments Update electronic member information Maintain filing systems and provide other general Agency support HOW WE REWARD OUR EMPLOYEES Starting hourly wage of $23.00 - $25.50 per hour, based on experience WE ARE LOOKING FOR CANDIDATES WHO Required Qualifications: A Current Property & Casualty Insurance license Must qualify, obtain, and maintain all applicable state licenses and appointments required for selling and/or servicing Auto Club Group Membership products. Successful completion of Customer Service, Insurance and Membership training within 6 months of hire Education: High School Diploma or equivalent Work Experience: Provide a high level of customer-focused service Service insurance policies and processing applications, renewals, and amendments Respond to billing and coverage questions Process monetary transactions; Taking payments Promote the sales of insurance products and services using established guidelines Present complex information in a clear and concise manner Knowledge and Skills: Analyze member/potential customer insurance needs and determine appropriate levels of coverage Prepare appropriate rate quotations Organize, plan and promote the sale of ACG insurance and membership products and services Perform outbound service calls Maintain accurate records Insurance terminology General insurance regulations Underwriting procedures Sales regulatory and compliance guidelines Insurance Systems and/or membership systems (e.g., PPS, POS, IMS, IPM) Work effectively in a team environment Work independently, with minimal supervision Exceed member expectations relating to professionalism of demeanor, efficient and effective customer service (on phone or in person) and maintenance of workstation and office facility Proficient in using Microsoft Office products Read, comprehend, and communicate clearly and concisely in the work environment and with the public (e.g ., explain instructions, rules and procedures) Perform mathematical calculations to accurately perform monetary transactions Work under pressure in a high volume, fast paced customer service environment Successfully complete appropriate training relative to all Auto Club Group (ACG) products and services Work Environment Work in a temperature-controlled office environment. Willingness and ability to work irregular hours to include weekends, holidays, and community events. Who We Are Become a part of something bigger. The Auto Club Group (ACG) provides membership, travel, insurance, and financial service offerings to approximately 14+ million members and customers across 14 states and 2 U.S. territories through AAA, Meemic, and Fremont brands. ACG belongs to the national AAA federation and is the second largest AAA club in North America. By continuing to invest in more advanced technology, pursuing innovative products, and hiring a highly skilled workforce, AAA continues to build upon its heritage of providing quality service and helping our members enjoy life's journey through insurance, travel, financial services, and roadside assistance. And when you join our team, one of the first things you'll notice is that same, whole-hearted, enthusiastic advocacy for each other. We have positions available for every walk of life! AAA prides itself on creating an inclusive and welcoming environment of diverse backgrounds, experiences, and viewpoints, realizing our differences make us stronger. To learn more about AAA The Auto Club Group visit *********** Important Note: ACG's Compensation philosophy is to provide a market-competitive structure of fair, equitable and performance-based pay to attract and retain excellent talent that will enable ACG to meet its short and long-term goals. ACG utilizes a geographic pay differential as part of the base salary compensation program. Pay ranges outlined in this posting are based on the various ranges within the geographic areas which ACG operates. Salary at time of offer is determined based on these and other factors as associated with the job and job level. The above statements describe the principal and essential functions, but not all functions that may be inherent in the job. This job requires the ability to perform duties contained in the job description for this position, including, but not limited to, the above requirements. Reasonable accommodations will be made for otherwise qualified applicants, as needed, to enable them to fulfill these requirements. The Auto Club Group, and all its affiliated companies, is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability or protected veteran status. Regular and reliable attendance is essential for the function of this job. AAA The Auto Club Group is committed to providing a safe workplace. Every applicant offered employment within The Auto Club Group will be required to consent to a background and drug screen based on the requirements of the position.

Are you tired of technician or maintenance jobs that don't offer you the career growth you are looking for? Do you want a job that offers more stability than turn around work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $21.50/hr with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

CNC Maintenance Technician is to work with the Maintenance Team to repair equipment and perform preventive maintenance, as required. Assignment and priorities will be set by the Plant Manager or other Senior Management. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. · Knowledge of OEM machine controllers); FANUC · Perform mechanical repairs (and rebuild) on all machines; · Pull and replace machine linear guides and ball screws; · Support with scheduling PM, reading report, diagrams and drawings; · Perform machine leveling and alignment on all machines; · Identify and replace parts as necessary; · Install, troubleshoot, repair and maintain machine tool equipment and controls; · Use machine tool manuals, technical documents, and internal and vendor resources to research machine issues; · General facilities maintenance; · Coordinate with external suppliers and maintenance companies to ensure timely and accurate completion of work; · Work based on a sense of urgency with machine down conditions; · In conjunction with production team, will support continuous improvement of development of PM instructions and schedules to prevent failures; · Troubleshoot hydraulics, electronics, and software, electrical, pneumatic and mechanical systems. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Work Location: In person

This will start as a temporary part time position. The Cable Technician I is responsible for performing basic low-voltage cabling work and providing on-site technical support for end users. This role supports daily IT operations, including troubleshooting workstation issues, installing and maintaining cabling infrastructure, and ensuring reliable connectivity at customer or internal locations. The ideal candidate is detail-oriented, customer-focused, and comfortable working in a fast-paced environment. Responsibilities - Install, terminate, and test Cat5e/Cat6 network cabling following industry standards. - Perform cable routing, dressing, labeling, and documentation. - Assist with installation of racks, patch panels, faceplates, and related hardware. - Troubleshoot connectivity issues related to cabling infrastructure. - Follow safety protocols and maintain a clean work environment on job sites. - Provide hands-on technical support for desktops, laptops, printers, mobile devices, and peripherals. - Perform troubleshooting for hardware, software, and network connectivity issues. - Assist with workstation setup, imaging, upgrades, and deployments. - Support user account setup, password resets, and basic application support. - Document work performed in ticketing systems and escalate issues as needed. - Provide excellent customer service to end users, both onsite and remotely. Work Environment Combination of office, industrial, and customer site settings. Role may require travel between sites and flexible hours based on project needs. #EES25 Requirements Qualifications - 1+ years of experience in cabling, IT support, or a related technical role. - Basic understanding of network cabling standards (TIA/EIA). - Familiarity with Windows OS, basic networking, and common IT troubleshooting steps. - Ability to use cabling and hand tools (punch-down tools, testers, drills, etc.). - Strong communication and customer service skills. - Ability to lift up to 50 lbs and work in various environments. - Valid driver's license may be required depending on job site needs. Preferred Skills - Experience with ticketing systems - Basic understanding of switches, access points, and network equipment. - Certifications such as CompTIA A+, Network+, or entry-level cabling certificates. Required tools: 8-10ft ladder RJ 45 Crimp tool Smart phone Flash light - not the one on the phone Fish Tape / Glow Rods Cordless drill Ethernet cable tester that displays output of all 8 pins simultaneous Cable toner Salary Description $28.00 - $32.00/hr

Recognized as a “Best Place to Work Modern Healthcare” - Join a team where people come first. At Vital Care, we are committed to creating an inclusive, growth-focused environment where every voice matters. Vital Care (****************** is the premier pharmacy franchise business with franchises serving a wide range of patients, including those with chronic and acute conditions. Since 1986, our passion has been improving the lives of patients and healthcare professionals through locally-owned franchise locations across the United States. We have over 100 franchised Infusion pharmacies and clinics in 35 states, focusing on the underserved and secondary markets. We know infusion services, and we guide owners along the path of launch, growth, and successful business operations. What we offer: Comprehensive medical, dental, and vision plans, plus flexible spending, and health savings accounts. Paid time off, personal days, and company-paid holidays. Paid Paternal Leave. Volunteerism Days off. Income protection programs include company-sponsored basic life insurance and long-term disability insurance, as well as employee-paid voluntary life, accident, critical illness, and short-term disability insurance. 401(k) matching and tuition reimbursement. Employee assistance programs include mental health, financial and legal. Rewards programs offered by our medical carrier. Professional development and growth opportunities. Employee Referral Program. Job Summary: The Regional Pharmacy Operations Compliance Technician provides ongoing operational, procedural and sterile compounding support (education, training, competencies and best practices in the Vital Care Way) to the Franchise pharmacies. This role is responsible for completing ongoing, onsite surveillance and monitoring of Franchise pharmacies within the company, including pharmacy operations, nursing (if applicable), administrative/clerical, and sales in compliance with regulatory requirements and organizational policies and procedures. The Regional Pharmacy Operations Compliance Technicians collect and report on the Franchise pharmacy through a Franchise checklist, Accreditation readiness tools, Quality Site Assessment, and other Franchisor metric tools and report to the Regional Director of Pharmacy Operations for further follow-up. Maintains communications with Vital Care Infusion corporate offices on infusion and specialty business. The Regional Pharmacy Operations Compliance Technicians provide feedback on policy, process, and techniques to franchise pharmacies to reinforce compliance with federal, state, and local regulations as well as Vital Care policies and procedures. The Regional Pharmacy Operations Compliance Technicians reviews and recommends improvements in the activities of all franchise pharmacy personnel, as well as quality control, creation, completion and updating of performance improvement procedures, monitoring, tracking, and trending of outcomes, and education of support staff under the supervision of the Regional Director of Pharmacy Operations. Duties/Responsibilities: Operational and Performance Improvement Related: Performance of pharmacy operations assessment activities assessing compliance with regulatory, accreditation and ethical standards and assuring activities are in accordance with organizational policies and procedures. Review of pharmacy Performance Improvement and outcomes reporting and collection and monitoring, tracking and trending of results for continuous performance improvement. Demonstrates sound operational knowledge, leadership, and stewardship attributing to the provision of support to the Franchise pharmacies driving key objectives and results. Uses available resources to gather information on the appropriateness of activities related to medication dispensing, compounding of sterile preparations, equipment use, and patient management/monitoring in the home and alternate site of care. Demonstrates understanding of USP 797/800 standards, accreditation standards, and current State Board of Pharmacy (BOP) regulations. Observes, monitors, and assesses compliance with accreditation standards and performs Quality Site Assessments at franchise locations. Acts as a resource to support franchise owners and staff, driving high-quality patient care and efficient operations at franchise locations. Stays knowledgeable of current industry practices and incorporates them into the support provided throughout the organization. Assists with employee orientation and preceptor responsibilities as needed. Completes assignments as directed in a timely manner. Reporting to the Regional Director of Pharmacy Operations, maintains effective communication, receives direction, and remains organized in completing reports, checklists and tools to ensure accurate details are clear to those intended. Mentor team members including pharmacy technicians to promote competency, leadership, and growth and development. Non-Clinical Services Related: Inspects and reports back on the physical maintenance and organization of the facility. Operates effectively as a liaison between the Franchise ownership and the Vital Care corporate team. Evaluates and collects information on key performance indicators and provides guidance and recommendations to the corporate teams and franchise pharmacies to support effective and efficient operations. Collects data through onsite and remote observations and assessments and incorporates the collected data and KPIs into the defined data collection tools timely and accurately as outlined by the Vital Care Infusion Services leadership. Recommends and monitors the monthly activities and identifies opportunities for improvement while partnering with the franchise pharmacy team members in developing and executing functional and lasting plans of corrective actions. Orients and competencies employees who staff franchise pharmacy departments. Operates as a resource for individual departments and Franchise employees in resolving questions, challenges, and activities to drive compliance and reduce risks to patients, team members, and the organization. Upholds local, state, and federal regulations on the provision of health care by professionals. Acts to implement and uphold company policies, procedures, and protocols in providing services to consumers. Is responsible for the performance improvement process, develops plans, assesses, improves, and maintains the quality of the company's management, operational, and other important internal processes and activities; assigns staff to performance improvement activities. Required Skills/Abilities: The position requires up to 80% travel. Excellent interactive and collaboration skills with employees, clinicians, referral sources, and consumers. Education and Experience: Certified Pharmacy Technician (CPHT) required with Certified in Compounded Sterile Preparations preferred (CSPT). Licensed/registered as required by the state Board of Pharmacy in state of residence. Business and financial understanding of operating a profitable business. Previous lead technician or supervisory experience. Three years' experience as a pharmacy technician with sterile compounding of medications, preferred in the home infusion space. Experience with management of pharmacy support personnel preferred. Physical Requirements: Sitting: Prolonged periods of sitting are typical, often for the majority of the workday. Keyboarding: Frequent use of a keyboard for typing and data entry. Reaching: Occasionally reaching for items such as files, documents, or office supplies. Fine Motor Skills: Precise movements of the fingers and hands for tasks like typing, using a mouse, and handling paperwork. Visual Acuity: Good vision for reading documents, computer screens, and other detailed work. May require lifting over 40 lb. Be part of an organization that invests in you! We are reviewing applications for this role and will contact qualified candidates for interviews. Vital Care Infusion Services is an equal-opportunity employer and values diversity at our company. We do not discriminate on the basis of color, race, sex, age, religion, national origin, disability, genetic information, gender identity, sexual orientation, veterans' status, or any other basis protected by applicable federal, state, or local law. Vital Care Infusion Services participates in E-Verify. This position is full-time.

HVAC Repair Technician Why an HVAC Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home like a first responder, lifting the weight off the shoulders of grateful homeowners You like to be on the move - You're not stuck at a desk all day - you are welcomed into customers' homes Why a career with Sears Home Services is right for you: Great hourly rates - $22 - $36 / hour base rate salary, depending on experience Benefits - Comprehensive set of medical, dental, and vision benefits, with an additional $4000 annual subsidy for associates with dependents! 401k match - Opportunity to contribute to 401k plan, with 100% company match up to 3%. More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Flexible schedules - Sears techs are NOT on call. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round Expert training - Best in class training program. Tens of thousands of repair techs trained by Sears Technical Institute in the past 60 years. We will teach you the skills you need to succeed! Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Easy tools - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support Job responsibilities: Repair appliances with high levels of quality and efficiency Deliver delightful customer experience that exceed expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Requirements: High school diploma or general education degree EPA Type II or EPA Universal Mechanical knowledge, including use of testing & repair tools Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Background & drug screen Valid driver's license for the state in which you work

Responsibilities Repair technician focuses initially on VFD repair and general repair Cross-train with other expert repair technicians to broaden repair experience across our other commodities Being a valuable and flexible part of the team to assist where needed as we grow Always representing the values of American Industrial to customers, vendors and American Industrial Colleagues Experience Allen Bradley Powerflex, Schneider Electric Altivar, Siemens Simondrive experience preferred Basic electronics training/schooling, EE schooling preferred 2-year board-level repair experience Must be highly competent in hand soldering surface mount components Must be able to identify all standard electronic components Must have soldering and desoldering expertise for both through-hole and surface mount VFD, Drive, Robotic Controls Repair experience #manycompaniesoneteam #FCGcareers #flowcontrolgroup #FCG-h

This top quality Motorrad Dealership is in the second largest city in Michigan and growing. We are looking for talented and motivated Motorcycle Service Technicians, from Entry Level to Experienced to work with us. We have amazing opportunities in our unique area that offers big city feel with country living just on the outskirts of town. If you are looking for a career with a fun and enjoyable atmosphere that is proud to be family-owned and locally operated for over 30 years we have a spot for you. This Dealership offers: Market leading pay plus bonuses increase for number of hours booked A great working environment with the latest equipment Structured, self-paced and paid training opportunities leading to manufacturer recognition Health Insurance Life and Disability Insurance 401(k) with company match Paid time-off Climate controlled work environment Discounted Employee purchases Job Description As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive/ Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High School Diploma or Equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • Must have a Valid Driver's License with motorcycle endorsement • Must perform duties and responsibilities in a safe manner

This top quality Motorrad Dealership is growing. BMW Motorcycles of Detroit is looking for talented and motivated Motorcycle Service Technicians, from entry level to experienced. Motorrad Service Technicians are passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. This Dealership offers: Market leading pay plus bonuses increase for number of hours booked A great working environment with the latest equipment A fantastic work atmosphere Structured, self-paced and paid training opportunities leading to manufacturer recognition Health, Dental, & Vision Insurance Life and Disability Insurance 401(k) Profit Sharing Paid time-off (after one year) Employee Discounts on BMW/Mini vehicles after 6 months Employee discounts on parts and apparel Unlimited overtime As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive, Heavy Equipment / Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High School Diploma or Equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • Must have a Valid Driver's License with motorcycle endorsement • Must perform duties and responsibilities in a safe manner This Dealership offers associates a team environment, great benefits and ongoing training and support. If you are in alignment with core values of integrity, transparency, professionalism, respect and teamwork - now might be the time for you to accelerate your career as part of the best company in motorcycle repair. Apply today or refer a qualified friend!

Full-time Description Zolman's Best One Tire & Service - Seeking a full-time Fleet Service Repair Technician Locally owned and operated, Zolman Tire, Inc. has serviced the automotive, light truck and commercial repair, tire, and wheel needs of customers throughout the Mishawaka, IN area since 1978. Over the years we have expanded into nine retail locations in Mishawaka, IN, Granger, IN, South Bend, IN, Niles, MI, Portage, MI, and Kalamazoo, MI and five commercial fleet locations in Mishawaka, IN, South Bend, IN, Galesburg, MI, Benton Harbor, MI, and Jackson, MI. We are seeking qualified fleet service mechanics for our Benton Harbor location who value safety and teamwork. Responsible for the efficient diagnosis, repair, and preventive maintenance of commercial vehicles along with replacement of general automotive parts and accessories (in shop or at customer location). Techs will partner with management and the service advisors to deliver superior service and education to customers on problems and proposed solutions for their fleet vehicles. Hours requirements are 8a-5p M-F, with willingness to work overtime as needed. If you are enthusiastic about the commercial repair industry, reliable, and have a positive attitude please apply! We offer a full benefit package including; weekly pay, employee discounts, medical, dental, vision, 401K/Match, group life insurance, company paid short term disability and life insurance, paid holidays off, paid time off, free and confidential employee assistance program, paid training, employee uniforms, TIA training opportunities, company picnics/events, branded attire, opportunity for growth, and more! Essential Functions: • Diagnoses, adjusts, and repairs light, medium, heavy duty vehicles, including: pick-ups, Class 3-8 trucks, buses, RV's, SUV's, off road vehicles, emergency vehicles, trailers • Communicates with management/service writers to gather or verify information and to advise of expected repair time • Troubleshoots equipment issues to determine most cost effective approach to fix, repair or resolve • Travels to locations of disabled equipment to fix, repair or diagnose problem(s) as needed, performing after hours calls on a rotating basis • Consults with other mechanics as needed to discuss problems or questions with any particular process or procedure • Operates equipment after completing repairs to ensure satisfactory completion/resolution of problem(s) • Maintains current knowledge and skill needed to diagnose, fix or repair heavy equipment and trucks • Follows established company policies and guidelines for safety, quality and customer service; wears personal protective equipment (PPE) as required or needed • Assists with taking inventory as needed • Completes required paperwork timely and accurately • Maintain hand tools, power tools, and other shop equipment in in good repair • Maintains orderly work area to include wiping up spills, neatly storing tools and parts, properly discarding old or unused parts and materials, sweeping area and emptying trash receptacles as needed • Perform other duties as assigned Zolman Tire, Inc. provides equal employment opportunity to all employees and applicants, without regard to race, color, religion, sex, age, national origin, citizenship status, disability, veteran status, genetic information, or any other legally protected category Industry specific and Covid-19 PPE are available to all floor and production staff. We promote a safe work environment and follow all protocols to insure a positive, productive and healthy work experience. Requirements Position Qualifications: • Accountability - Ability to accept responsibility and account for his/her actions. • Analytical Skills - Ability to use thinking and reasoning to solve a problem • Communication, Oral - Ability to communicate effectively with others using the spoken word • Communication, Written - Ability to communicate in writing clearly and concisely • Customer-Oriented - Ability to take care of the customers' needs while following company procedures • Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace • Motivation - Ability to inspire oneself and others to reach a goal and/or perform to the best of their ability • Problem-Solving - Ability to find a solution for or to deal proactively with work-related problems. • Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, materials, and personnel • Safety Awareness - Ability to identify and correct conditions that affect employee safety • Working under Pressure - Ability to complete assigned tasks under stressful situations Exhibit our Vision, Mission and Core Values: • Vision: The leading and most trusted provider of tires and services in all our geographic markets. • Mission: Creating raving fans • Core Values: o Live with integrity, character & passion o Commit to the pursuit of perfection o Possess a servant's attitude o Accept the urgency of accountability and the necessity of change Physical Demands / Work Environment: • Read ticket and perform work listed; write confirmation and recommendation • Environment: Work in environment that is not climate controlled. Temperatures range from extremely hot to extremely cold, depending on the season. • Vision (Near, distance, Color, Peripheral, Depth Perception) • Sense of sound (Ringing telephones, alarms, horns and motorized equipment) • PPE: Ability to wear Personal Protective Equipment (PPE) (Safety Glasses, gloves, footwear) Skills & Abilities: Experience: • 2-4 years' experience in commercial automotive repair industry • Knowledge of trailer maintenance and repairs preferred Certifications/Licenses: • Valid driver's license; driving record must meet company's insurance requirements • ASE certifications preferred • TIA Commercial 200 level certification (company can provide) • Michigan Mechanic's license • Ongoing training is required per company's standards Equipment • Knowledge of diagnostic and repair equipment

Job Title: Repairs & Compliance Technician Reports to: Compliance Coordinator & Communications Lead DTN is a 50 year old vertically integrated real estate firm based in Lansing, MI. We are one of Michigan's largest and well respected construction, development and ownership companies of multifamily real estate properties. Through our development and operations team, DTN seeks to create and deliver unique experiences for those choosing a DTN home or apartment. As the Repairs & Compliance Technician, you will influence and guide the experience for those that visit a DTN owned or managed community. Job Summary The Repairs & Compliance Technician is responsible for executing and verifying all corrective actions related to compliance inspections. This role ensures repairs are completed to code, re-inspections are passed on the first attempt, and all documentation is accurately maintained. The position is field-based, requiring close coordination with maintenance teams, vendors, and the Compliance Coordinator & Communications Lead. As a Repairs & Compliance Technician, your primary responsibilities include: Review inspection reports and ensure all cited items are assigned, addressed, and repaired within city deadlines Complete all corrective actions per code and with great quality of work Coordinate with maintenance teams and external vendors when necessary to complete corrective actions efficiently Conduct property site visits to verify repairs, ensure compliance with inspection standards, and document completion with photos or reports Prepare properties for re-inspections and support the scheduling and coordination of city follow ups Maintain accurate tracking of repairs, costs, and completion status in company systems Report any recurring issues, potential code risks, or systemic maintenance deficiencies to leadership Assist in developing preventative maintenance plans to reduce repeat violations Core Candidate Qualities: 2-4 years' of experience in property maintenance or facilities operations (multifamily or student housing experience preferred) Working knowledge of local building codes, maintenance standards, and various inspection processes Ability to read and interpret inspection reports and work orders Strong organizational skills and attention to detail with a focus on accountability and follow-through Basic proficiency with Microsoft Office and property management software Can do attitude and collaborative mindset - We all succeed by working as a team Desire to provide great customer outcomes Experience using industry software is preferred Valid Driver's License Reliable transportation to get to work daily and conduct daily job responsibilities Benefits: Health, Vision, and Dental Coverage Competitive 401K package Paid Time Off Paid Holidays 8 Hours Paid Annual Volunteer Time Education Reimbursement Mileage Reimbursement Rental Discount at Select DTN Properties Ongoing Training, Mentorship and Job Shadowing Growth Opportunity Expected Schedule: Monday - Friday (40 hrs/week) If you are interested in joining our company but do not feel you meet the requirements for this position, APPLY anyway! We are always looking for talented and motivated individuals to join our team in various departments. We will review your resume and will reach out if there are any other roles that closely match your qualifications! For more information, please visit **************

Company DescriptionJobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job DescriptionDepartment Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $18.75/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

We are seeking a skilled and versatile Maintenance Technician 1 to join our client's team in Troy, MI. In this role, you will perform preventive maintenance, troubleshoot equipment, and support facility operations to ensure optimal performance and safety. This position requires strong mechanical aptitude, fabrication skills, and the ability to work independently with minimal supervision. RESPONSIBILITIES AND ESSENTIAL DUTIES: Perform duties safely using approved safety equipment and procedures. Troubleshoot Trystar equipment with minimal supervision; contact manufacturers for technical support as needed. Perform preventive maintenance (PMs) regularly and as required. Update maintenance management software by entering assets, work orders, and generating PM/work order status reports. Apply general fabrication skills, including welding (MIG & TIG), plasma cutting, torch cutting, and band saw cutting. Read facility blueprints for equipment and production line layout. Apply mechanical knowledge and basic electrical meter skills for troubleshooting. Disassemble and diagnose mechanical failures; perform necessary repairs. Assist with machinery installations and maintain most equipment independently. Apply plumbing skills for facility maintenance (e.g., sinks, drain lines, toilets). Apply HVAC skills for equipment and facility maintenance (e.g., heaters, furnaces, AC systems, exhaust fans). Assist outside contractors with machinery repairs and installations. Maintain knowledge of pneumatics (repair airlines, fittings, valves, cylinders) and hydraulics (replace hoses, pumps, valves). Maintain a clean and organized work area throughout the day. Safely operate forklifts and scissor lifts. Inventory and control stock of maintenance supplies. Participate in continuous improvement efforts by identifying and supporting process improvements. MINIMUM REQUIREMENTS: Basic Qualifications High school diploma or equivalent (GED). Two years of technical training in industrial maintenance or building repair OR four years of experience as an Industrial Maintenance associate. Ability to read, write, and understand work instructions in English. Familiarity with operating power tools. Ability to safely perform job responsibilities. Flexibility in work hours and participation in on-call rotation. Positive attitude and adherence to company policies.

About Ace Retail Group Ace Retail Group (ARG), is a division of Ace Hardware Corporation that owns and operates several Ace brands, including Westlake Ace, Great Lakes Ace, Buikemas Ace, Outer Banks Ace, Dennis Company, and Breed & Company.ARG is one of the largest hardware retailers in the United States and has two headquarters located in Lenexa, KS and Farmington Hills, MI.ARGs origins date back over a century and operates over 250 neighborhood stores located throughout the United States.Great people make ARG stand out in our industry, and we are looking for individuals who strive for personal and professional growth, and who want to work with a company founded on (and still led by) our solid Core Values of: Winning, Excellence, Love, Integrity, Gratitude, Humility and Teamwork. Great Lakes Ace Hardware is growing and expanding! We are looking to add friendly faces to our existing team! The ideal candidate for the STIHL Technician Position will be mechanically inclined and have experience in small engine repair and equipment maintenance, preferably with STIHL power equipment. The preferred candidate will have the ability to show consumers how to properly use a wide variety of STIHL power equipment. In addition, this candidate will be responsible for maintaining outstanding customer service, generate sales, merchandise product, own assigned departments and support the store management team. ESSENTIAL DUTIES AND RESPONSIBILITIES Equipment Repair: Ensures equipment is repaired, safe, and ready to process. Orders repair parts as needed for equipment repair Ensures proper check in and check out of equipment Maintains repair schedule and regular maintenance schedules for all STIHL equipment Identifies and notifies management of any pricing irregularities in the system Customer Service & Sales: Ensures customers are provided with the highest levels of customer service. Greets all customers and assists in answering questions about merchandise and locating merchandising; uses The S.A.L.E.S. process to help customers find everything on their lists. Completes all company and departmental paperwork accurately, including Price Change Bulletins, Operation Actions, Red Tags, and Bin Tags. Receives, opens, and unpacks cartons or crates of merchandise, checking paperwork against items received when required, and replenishes stock when necessary. Displays and maintains merchandise on end caps, shelves, counters or tables following company plan-o-gram, building displays when necessary to attract customers and promote sales within specified guidelines by your management team. Maintains on-hand integrity through inventory adjustment reports including; cycle count, negative on-hand. Follows the nightly maintenance checklist to ensure proper store recovery and cleanliness. Maintains familiarity with new products and ad merchandise. Has sound awareness of surroundings, customers, etc. and practices loss prevention techniques to minimize shoplifting losses. Working knowledge of the tools available to operate the store; including, but not limited to: RF Gun, Back Office Procedures and the use of Store Opportunities. Follows GLA policies and procedures for all transactions. Engages the customer to ensure they are receiving all the benefits of being an Ace Rewards member and actively seeking participation from them. Must be able to communicate effectively, and work with colleagues and customers effectively and professionally. ADDITIONAL DUTIES AND RESPONSIBILITIES Assists with color matching and mixing paint Operates cash register by scanning all merchandise, engaging the customer through suggestive selling, proper tendering of each transaction, and thanking the customer for shopping at GLA. Adhere to all company policies. Participates in periodic team meetings. A continuous pattern of regular and prompt attendance is required along with the ability to work a flexible schedule including weekends. Compensation Details $15/HR For a full list of benefits and open positions, please visit us at: ************************************************************ Want to be notified when new jobs are posted? Follow the link below to create an account and set up custom job alerts: Create Job Alert Equal Opportunity Employer Ace Retail Group is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military discharge, or any other action covered by federal or state laws. Required Preferred Job Industries Retail

Zolman's Best One Tire & Service - Seeking a full-time Fleet Service Repair Technician Locally owned and operated, Zolman Tire, Inc. has serviced the automotive, light truck and commercial repair, tire, and wheel needs of customers throughout the Mishawaka, IN area since 1978. Over the years we have expanded into nine retail locations in Mishawaka, IN, Granger, IN, South Bend, IN, Niles, MI, Portage, MI, and Kalamazoo, MI and five commercial fleet locations in Mishawaka, IN, South Bend, IN, Galesburg, MI, Benton Harbor, MI, and Jackson, MI. We are seeking qualified fleet service mechanics for our Benton Harbor location who value safety and teamwork. Responsible for the efficient diagnosis, repair, and preventive maintenance of commercial vehicles along with replacement of general automotive parts and accessories (in shop or at customer location). Techs will partner with management and the service advisors to deliver superior service and education to customers on problems and proposed solutions for their fleet vehicles. Hours requirements are 8a-5p M-F, with willingness to work overtime as needed. If you are enthusiastic about the commercial repair industry, reliable, and have a positive attitude please apply! We offer a full benefit package including; weekly pay, employee discounts, medical, dental, vision, 401K/Match, group life insurance, company paid short term disability and life insurance, paid holidays off, paid time off, free and confidential employee assistance program, paid training, employee uniforms, TIA training opportunities, company picnics/events, branded attire, opportunity for growth, and more! Essential Functions: • Diagnoses, adjusts, and repairs light, medium, heavy duty vehicles, including: pick-ups, Class 3-8 trucks, buses, RV's, SUV's, off road vehicles, emergency vehicles, trailers • Communicates with management/service writers to gather or verify information and to advise of expected repair time • Troubleshoots equipment issues to determine most cost effective approach to fix, repair or resolve • Travels to locations of disabled equipment to fix, repair or diagnose problem(s) as needed, performing after hours calls on a rotating basis • Consults with other mechanics as needed to discuss problems or questions with any particular process or procedure • Operates equipment after completing repairs to ensure satisfactory completion/resolution of problem(s) • Maintains current knowledge and skill needed to diagnose, fix or repair heavy equipment and trucks • Follows established company policies and guidelines for safety, quality and customer service; wears personal protective equipment (PPE) as required or needed • Assists with taking inventory as needed • Completes required paperwork timely and accurately • Maintain hand tools, power tools, and other shop equipment in in good repair • Maintains orderly work area to include wiping up spills, neatly storing tools and parts, properly discarding old or unused parts and materials, sweeping area and emptying trash receptacles as needed • Perform other duties as assigned Zolman Tire, Inc. provides equal employment opportunity to all employees and applicants, without regard to race, color, religion, sex, age, national origin, citizenship status, disability, veteran status, genetic information, or any other legally protected category Industry specific and Covid-19 PPE are available to all floor and production staff. We promote a safe work environment and follow all protocols to insure a positive, productive and healthy work experience. Requirements Position Qualifications: • Accountability - Ability to accept responsibility and account for his/her actions. • Analytical Skills - Ability to use thinking and reasoning to solve a problem • Communication, Oral - Ability to communicate effectively with others using the spoken word • Communication, Written - Ability to communicate in writing clearly and concisely • Customer-Oriented - Ability to take care of the customers' needs while following company procedures • Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace • Motivation - Ability to inspire oneself and others to reach a goal and/or perform to the best of their ability • Problem-Solving - Ability to find a solution for or to deal proactively with work-related problems. • Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, materials, and personnel • Safety Awareness - Ability to identify and correct conditions that affect employee safety • Working under Pressure - Ability to complete assigned tasks under stressful situations Exhibit our Vision, Mission and Core Values: • Vision: The leading and most trusted provider of tires and services in all our geographic markets. • Mission: Creating raving fans • Core Values: o Live with integrity, character & passion o Commit to the pursuit of perfection o Possess a servant's attitude o Accept the urgency of accountability and the necessity of change Physical Demands / Work Environment: • Read ticket and perform work listed; write confirmation and recommendation • Environment: Work in environment that is not climate controlled. Temperatures range from extremely hot to extremely cold, depending on the season. • Vision (Near, distance, Color, Peripheral, Depth Perception) • Sense of sound (Ringing telephones, alarms, horns and motorized equipment) • PPE: Ability to wear Personal Protective Equipment (PPE) (Safety Glasses, gloves, footwear) Skills & Abilities: Experience: • 2-4 years' experience in commercial automotive repair industry • Knowledge of trailer maintenance and repairs preferred Certifications/Licenses: • Valid driver's license; driving record must meet company's insurance requirements • ASE certifications preferred • TIA Commercial 200 level certification (company can provide) • Michigan Mechanic's license • Ongoing training is required per company's standards Equipment • Knowledge of diagnostic and repair equipment