Repair technician jobs in Palatine, IL

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply via my ADP. Factory Location: Woodridge, IL Compensation: $41.03 / hour 6-8% shift differential paid for applicable hours worked Shift: Sunday - Thursday 9pm - 5:30am Ability to work holidays and weekends per business needs Responsibilities: Skills Required Performs routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include - repairing and improving, from minor rebuilds to major overhauls on all equipment. Identify processing waste reduction opportunities and assist in reduction projects. Participate in preventative maintenance program to help reduce costs of operations through PM optimization. Dismantles, cleans, repairs and tests electrical, electronic and mechanical components to determine component-level failure Support equipment installations, retrofits and upgrades to include vendors and contractors Communicate, coach and train employees to continuously improve team's ability to respond to equipment failures and loss of production. Actively support NCE through SLC DOR, DER, GSTD's - DMAIC projects and Debriefs or shift handoffs Maintains preventative maintenance logs and accurate records of all testing and repairs Recommends equipment to be included in preventive maintenance programs. Perform Preventative Maintenance task to identify all potential mechanical and electrical issues with equipment throughout the plant. Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM's. Troubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc. Eliminates problems from recurring utilizing the Breakdown Analysis process Communicates directly with equipment suppliers, contractors and vendors as necessary Areas of responsibility will include but are not limited to -Production support - Mechanical Room- Water Processing - Boiler Room -Waste Water Treatment- Water Chemical Treatment Program Qualifications: Qualifications Three or more years proven maintenance experience in a manufacturing environment Prior experience with high and low pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Successfully demonstrates strong mechanical abilities Strong communication and interpersonal skills for interaction with all employees. Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with various support groups, supervisors, and team members Maintain a high level of professional and organizational ethics and image with all plant and outside personnel Able to read, interpret and analyze computer generated reports Perform all tasks with extreme accuracy Must be able to do physical inspections, (i.e. climbing, reaching, extending) Must be proficient with mechanical drawings and OEM technical prints for parts identification Proficient computer navigation skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Works together with Safety department to achieve a zero injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environment Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

Safely maintain, repair and rehab equipment in multiple areas within the Maintenance Division; Plumbing, Kitchen Equipment Repair, HVAC/R, Aquatic Systems & Water Quality. Responsibilities: Perform daily, weekly and monthly inspections of assigned equipment and locations Perform rehab work on assigned equipment and locations Maintain, install, repair and trouble-shoot various items, equipment and locations Inspect equipment and locations for malfunctions and repair Perform routine preventative maintenance on various pieces of equipment Assist with keeping a daily duty log of maintenance work performed as well as accurate records of preventative maintenance Effectively and professionally communicate and coordinate with other departments within the park. Comply with company procedures, policies and safety standards Help to ensure compliance with government codes and corporate mandates. All other duties as assigned. Qualifications: Knowledge of Plumbing, HVAC/R, Aquatic Systems and Water Quality Should possess practical skills and willingness to learn in all of the respective areas; Plumbing, HVAC/R, Aquatic Systems, and Water Quality Experience with electrical, plumbing & natural gas systems preferred Ability and willingness to work any shift and on weekends and holidays as needed Must be able to trouble-shoot clearly, calmly and safely in the presence of Guests and fellow Team Members Must possess strong safety sensitivity & ability to work with many different types of devices High School Diploma or equivalent Must possess a valid Driver's License

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Electrical Maintenance Technician - Manufacturing to join their team. This is a fantastic opportunity for someone who is passionate about electrical systems, troubleshooting, and continuous improvement. Key Responsibilities: Diagnose, repair, and maintain electrical systems, including PLCs, HMIs, MCCs, motors, drives, and control panels. Perform preventive and predictive maintenance to ensure maximum equipment uptime. Read and interpret electrical schematics, blueprints, and technical diagrams. Install, test, and service wiring, equipment, and fixtures in compliance with OSHA, NFPA 70E, and Lockout/Tagout (LOTO) safety standards. Document maintenance activities and support inventory management. Collaborate with cross-functional teams to resolve technical issues and drive process improvements. Qualifications and Skills: High School Diploma. Journeyman Electrician License preferred. Minimum 3 years of experience in electrical maintenance within a manufacturing environment. Strong troubleshooting skills with PLCs, HMIs, MCCs, and industrial power distribution. Working knowledge of OSHA, NFPA 70E, and LOTO programs. Ability to read and interpret electrical schematics and technical documentation. Experience in food manufacturing or a related industry. Technical or vocational training in industrial electricity. Ability to work both in office and on the plant floor, including standing, walking, and occasional lifting (up to 50 lbs). Compensation Range: $34.00/hr - $38.00/hr Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Electrical Maintenance Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Extensive travel required. (Local, National) · Promotes and adheres to the ATS safety culture. · Engages in various work environments and industries to lead reliability centered maintenance efforts. · Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel · Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership. · Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction. · Actively drives the implementation of equipment improvement projects. · Identifies and implements current and new processes / technologies to increase equipment performance and uptime · Champions systems and best practice procedures towards a proactive manufacturing culture. · Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques. · Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts. · Utilizes predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution. · Collaborates with the maintenance team to prioritize assets and actions by determining failure probabilities and evaluating the risk of compliance, supply, strategy, and cost. · Provides training and coaching in Root Cause and Reliability Analysis and takes ownership for ongoing corrective action tracking, implementation and follow up to ensure that all Root Cause Analysis projects are documented. · Ensures compliance with regulatory requirements and ATS policies and procedures. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in engineering (ABET accredited) · Eight or more years of reliability experience across 2 or more manufacturing sites · Demonstrates ability to perform full array of reliability tool sets · Strong technical understanding of electrical or mechanical components, tools, and designs · Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis · Ability to research and apply new equipment technology / trends · Robust problem solving, mathematical, analytical, and decision making skills · Proficiency with computers, maintenance systems, and applications, including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Strong reporting and technical writing capability · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop into a leadership role · Experience with data trend analysis, vibration analysis, motor current analysis, oil analysis, lubrication and hydraulic testing, laser alignment, nondestructive testing, infrared thermography, ultrasound technology, acoustic reliability technology, Weibull analysis, and Six Sigma or Lean Manufacturing methodologies · Knowledge of various government regulations such as, Current Good Manufacturing Practice (cGMP), National Electrical Testing Association (NETA), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA) · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus · Self-awareness · Management & Leadership Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$50.96-$65.19 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

About the Company HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: **************** About the Role The Service Engineer position is the primary point of contact responsible for training, installation and maintenance of all HSG tech machinery in our Chicago showcase space and equipment purchased by HSG Tech customers in the US region. Reporting directly to the Service Manager in the US, this position will manage technical issues, maintain customer satisfaction, provide monthly maintenance support, promote value add-on services and provide training support. Business travel will be a requirement for this position. Responsibilities Provide key objective management (proper machinery installation, proper accessory management and proper understanding of service data) Optimize work order organization, safe tool use and customer data reporting. Demonstrate understanding of expense reimbursement documentation and customer service evaluations Partner with internal Sales, Marketing, Finance, Customer Service and R&D teams to support stakeholder objectives On-time completion of equipment installation, commission and maintenance tasks while following the company's strict safety and quality guidelines Analyze and find root cause of maintenance impediments, debug system errors and propose system improvements. Participate and prepare company held trainings regarding technical process, company regulation and technician job duties. Conduct customer visits monthly for routine service maintenance while promoting related value add-on services. Provide one-to-one training and guidance for new hired service team members. Qualifications Two years of working experience in related industry (Fiber Laser experience highly preferred) Technical know-how: installation, debugging and maintenance on 6KW equipment Comprehension of circuit diagrams Familiar with CAD or SOLIDWORKS design software Familiar with mechanical principles Detail & deadline-oriented; well organized Excellent verbal and written communication skills Good interpersonal skills; ability to interact with staff across matrix partners Electrician's certification Fitter's certification Job level and pay is dependent on experience. Pay ranges and level progressions: Service Technician ($29-35 hourly) Service Engineer ($36-41 hourly) Senior Service Engineer ($42-48 hourly) HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training Compensation: $26.67 - $29.00 hourly pay What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Role: Hemmersbach is seeking a highly motivated and customer-oriented Field Technician to join our team. As a Field Technician, you will be responsible for providing exceptional technical support to our clients, both consumers, and enterprises, in a timely and efficient manner. The ideal candidate will have experience working with desktops, laptops, RPOS, and printers. This role requires a high level of customer service skills, as you will be the face of Hemmersbach in our clients' locations. You must be comfortable with long-distance driving, as this is a high-demand role that may vary depending on location. Responsibilities: Providing excellent customer service by communicating clearly and professionally with clients, ensuring they are satisfied with the support provided. This includes responding promptly to client requests for technical support, either on-site or remotely, depending on the client's needs and the project's scope. Performing equipment installations, upgrades, and repairs for clients' desktops, laptops, RPOS. and printers. Willingness to learn and become part of a role that will include Data Centers, servers, and other IT equipment. Providing technical support for HP servers and data center equipment, including installation, configuration, and troubleshooting of hardware, software, and network issues. This includes diagnosing and resolving server and data center-related issues, ensuring client satisfaction by delivering exceptional customer service. Provide day to day support at the customer locations within a geographical region(s). Support customers in technical problems they have with their technical equipment. Required skills: 2-3 years of experience replacing hardware components (Motherboards, Hard drives, etc). Technical certifications such as A+ or Network+ are preferred. Problem solving. Customer focus. Willingness to be in a On Call rotation with other team members, including working after hours and weekends. Valid drivers license, with reliable vehicle with acceptable insurance. Requirements: 18 months of IT experience (or equivalent) Experience in Windows 7-11, MS Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, enterprise anti-virus solutions and IT ticketing systems. Driving licence Excellent time management skill Benefits: Buddy program Dental insurance Health/ Medical insurance Internal career development program Life insurance Mobile working Onboarding program Unlimited employment contract Be part of Us Hemmersbach provides IT infrastructure services in more than 190 countries with 50 own subsidiaries. We deliver exclusively for the leading companies in the IT industry. We go the extra mile - we not only simply enthuse our customers, but also make the world a better place: 20% of our profits go into our Direct Actions Hemmersbach Rhino Force and Hemmersbach Kids' Family. That's why Hemmersbach is The Social Purpose IT Company.

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Looking to increase your Sat&Sun -or- Sat -or- Sun Weekend Earnings? Nidec Mobility (Automotive Electronics) seeks a highly experienced Equipment Maintenance Technician (automated electronics (SMT / ECU) assembly lines who is looking for part time weekend work (1st, 2nd, or 3rd shifts). High Sat / Sun Pay for the High Performer. 1st 5:30AM-1:45p 2nd 1:30PM-9:45p 3rd 9:30PM - 5:45a Objective Under direction of the Maintenance Technician Supervisor, technicians performs various skilled and complex tasks in the repair and maintenance of automated electronic assembly production machinery and equipment which may include, but is not limited to, high speed automated -assembly line equipment, contact welding and press machines, axial and radial inserters. Responsible to continuously improve the equipment and machinery while demonstrating excellence in maintenance service. Essential Responsibilities Monitor, analyze, diagnose, fine tune or repair problems in conjunction with manufacturing engineering and production supervisors. Reads and interprets blueprints, drawings, wiring schematic diagrams, and complex equipment manuals. Utilizes basic mechanical and electrical troubleshooting skills in problem assessment. Assists in testing and evaluating equipment performance. . Assists with developing and maintaining the equipment spare parts inventory. May complete purchase requisitions for the purchase of spare parts. Assists in investigating causes of machine problems, raw materials, tooling and equipment. Recommends improvements to processes and equipment to improve efficiency. Properly documents new procedures and machine changes or additions. Accurately completes all paperwork associated with PM and machine downtime. Assists in creating special fixtures or modify existing equipment with the use of surface grinders, milling machines, arc welder, and lathes. Utilizes various diagnostic equipment and measuring devices such as voltmeters, calipers, micrometers, and oscilloscopes. Supports and participates in the Company's management and quality system including continuous improvement efforts. Experience: 5+ years experience, within automated assembly equipment Education: High School or Equivalent Knowledge/Skills/Abilities Strong knowledge of electro-mechanical equipment operating under PLC's, robotics, machining, pneumatics, hydraulics, and sensor controls. Expert experience with various diagnostic equipment and measuring devices such as voltmeters, calipers, micrometers, and oscilloscopes. Effective interpersonal and communication skills with strong time and project management skills. Basic PC skills (Microsoft Office, Word and Excel).Familiarity with computerized PM program preferred. Preventative maintenance experience with exposure to computer software and systems. NOTE: This position Is Not open to external sourcing (Recruiting agencies) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description: LOOKING FOR A COMPANY THAT VALUES YOUR POTENTIAL? $5,000.00 Sign on Bonus (Not applicable to internal employees) A job with AT&T as an Automotive Equipment Technician can provide you with exactly that! AT&T offers a competitive salary, company- provided vehicles and tools and benefits that include medical, dental, paid vacation, and more! Our Automotive Equipment Technicians perform diagnosis, maintenance and repair of a diversified fleet of vehicles and other motorized/non-motorized equipment. What you'll do as an AT&T Automotive Equipment Technician: Operate and maintain all motor vehicles and motor-drive tools. Disburse gasoline; clean, lubricate and paint motor vehicles. Perform preventative maintenance including: inspections, adjustments, repairs and overhauls on all motor vehicles associated equipment (such as brakes, electrical, ignition, cooling, transmission) and construction trailers. Repair, service and test electrical and hydraulic powered equipment such as: aerial lift, generator, pumps, winches and specialized underground equipment and compressors. Receive, record and analyze reports of trouble on individual company motor vehicles and tools. Order or assist in ordering vehicles and/or specialized equipment parts. Maintain inventory and stock level in Motor Vehicle parts room Required Qualifications. In addition to STRONG communication skills, our Automotive Equipment Technicians must have the following: Certification in 1 to 5 categories of Mechanics Certification by the National Institute of Automotive Services Excellence (ASE) OR equivalent certification from an automobile manufacturer (e.g., Ford GM, Chrysler), trade school, or equivalent state license/certification. Valid state driver's license. Commercial driver's license after proper training and qualification on state and company driving tests may be required. Meet 285lbs weight limit due to safety restrictions. Ability to lift and move up to 80lbs. Ability to work a flexible schedule including evenings and weekends. Our Automotive Equipment Technicians earn between $20.48 to $49.55 per hour depending on experience. With our amazing wage opportunities, our average starting earnings begin at $72,831 per year. Individual starting salary within this range may depend on geography, experience, expertise, and education/training. Joining our team comes with amazing perks and benefits: • Medical/Dental/Vision coverage • 401(k) plan • Paid Time off and holidays (With some exceptions bargained employees qualify for one week of PTO after 6 months of service and 2 weeks after the first year). At least 6 company designated holidays and additional PTO (based on bargaining group to which you are hired). • Sick leave (may vary by state and based on bargaining group to which you are hired). • Adoption Reimbursement • Disability Benefits (short term) • Life and Accidental Death Insurance • Supplemental benefit programs: critical illness, accident hospital indemnity/group legal • Employee Assistance Programs (EAP) • Employee discounts up to 50% off on eligible AT&T mobility plans and accessories, AT&T internet (and fiber where available) and AT&T phone There is a lot to be excited about at AT&T. Apply today! AT&T will consider for employment qualified applicants in a manner consistent with the requirements of federal, state and local laws Weekly Hours: 40 Time Type: Temporary (Fixed Term) Location: Addison, Illinois It is the policy of AT&T to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, AT&T will provide reasonable accommodations for qualified individuals with disabilities. AT&T is a fair chance employer and does not initiate a background check until an offer is made. d24ad0b8-823f-4e68-a892-2986ccdf7392

Data Center Technician - Night Shift Shift: Night Shift B - 12-hour shifts Option 1: Thursday-Saturday Option 2: Wednesday-Saturday Rate: $27-32/hour Type: 6 month Contract to Hire About the Role We are seeking a Data Center Technician to join our team and support critical infrastructure operations during night shifts. This role involves hands-on work with hardware components, troubleshooting, and ensuring smooth data center functionality. Responsibilities Prepare, stage, set up, and perform startups and shutdowns of hardware (e.g., racks, hard drives, switches) following detailed instructions, checklists, and standard protocols. Perform diagnostics and troubleshooting to quickly identify issues and replace faulty components. Decommission hardware for simple changes and refreshes (e.g., memory upgrades, OS rebuilds) with minimal guidance. Communicate, report, and escalate incidents according to established procedures. Required Skills & Experience 1-2 years of experience in Helpdesk, Desktop Support, or IT hardware roles. Strong technical aptitude and eagerness to learn. Reliable, committed, and proactive “go-getter” attitude. Ability to work night shifts (12-hour schedule as listed above). Nice to Have Previous experience in a data center environment.

Rad Tech Opportunity - Oak Lawn, IL! 🌟 Seeking skilled ARRT RT licensed and IEMA-accredited Radiologic Technologist for evening shifts at Level I Trauma center. Strong GI, Surgery, and trauma experience required! Shift Details 8-hour evenings: 3pm-11:30pm (40 hours/week) Competitive Pay Package (40 hrs/week) Gross Weekly: $2,920 Taxable Weekly: $1,320 Non-Taxable Weekly: $1,600 Perfect for experienced Rad Techs ready for high-acuity cases! #RadTechJobs #OakLawnIL #TravelNursing #TraumaCenter

Onsite Contract W2 only In this role you will be working in a team environment to help build out new and existing datacenters on a project basis. The right candidate will have at least a year of experience working in a datacenter and be familiar with various types of hardware and network devices. You will be responsible for cable labeling, installation/patching and management. This position offers the chance to work for one of the most elite names in the Technology space with the potential for a full-time opportunity. The following experience will ensure you are a good match: 1+ year working in a Datacenter Experience labeling, managing and cabling network devices Abily to work on your own with Management direction

Job Summary: We are seeking a highly motivated and skilled Data Center Optical Engineer to join our team. The ideal candidate will have experience in racking, cabling, and stacking equipment, decommissioning, break-fix, remote hands services, hardware replacement, and network transport optical troubleshooting. The Optical Engineer will ensure the seamless operation of our data center facilities, providing top-notch customer service and technical support. Key Responsibilities: Break-Fix: Must be able to work outside of normal business hours (i.e., shift work), to include nights and weekends, when needed. Remote Hands: In-depth knowledge of data center equipment installation and basic testing methods and procedures (MOPs). Knowledge of operating principles of data center, wireline and IP transport environments. Ability to interpret and perform tasks outlined in MOPs, vendor documentation, technical specifications, network practices, engineering letters and job aids. Knowledge of telephony networks, optical and IP networks. Ability to identify all colors associated with telecommunications cable and equipment indicator lights. Interpret and follow detailed method of procedures (MOPs) and engineering documents / diagrams. Cabling: Ability to work in overhead rack or grid for extended periods of time pulling long lengths of heavy cables. Handling, installation, and troubleshooting of Ethernet and fiber cables and connectors, including but not limited to CAT 5, CAT 6, structured cable, fan-outs, single mode, multi-mode, RJ45, and LC. Optical Testing and Troubleshooting: Complete all activities associated with physically placing equipment identified in project specification documents including but not limited to, routing, lacing, labeling, terminating and local / remote testing and turn up of ethernet, switchboard, fiber, and power cables. Utilize optical power meter, stabilized light source, VFL, OTDR, and test equipment to test 10/100G circuits using BERT, RFC2544, EtherSAM (Y.1564), and iPerf (1G-10G). Analyze and resolve network issues associated with equipment installations / removals. Perform and assist card level troubleshooting and replacement procedures with assistance from control centers and/or back-office engineers. Site Audits: Review project specifications to validate equipment placement, cable assignments and determine cable lengths then document results in proprietary databases. Provide timely and accurate feedback to audit / survey requests. Racking and Stacking: Install, organize, and maintain hardware equipment in data center racks following standard operating procedures. The ability to use hand tools and power tools. Ability to learn and retain physical and mechanical installation specifications. Understanding of basic mechanical terms and tools. Decommissioning: Safely remove and dispose of outdated or failed hardware following data destruction protocols. Hardware Replacement: Replace faulty hardware components, including transport routers, servers, switches, and other network & IT equipment. Power Management: Work with power feeds, including redundancy, automatic transfer switches (ATS), and manage hot/cold aisles effectively. Documentation: Read and interpret cut-sheets for physical network installation, ensuring accurate port connections and cable management. AC and DC Power Equipment: Maintain and troubleshoot AC and DC power equipment, ensuring reliable power distribution and connectivity. Provide oversite of 3rd parties' on-site activities Qualifications: Experience: 3-5 years of experience working as a technician in data center operations or a similar environment, interacting directly with customers. Team lead experience preferred Soft Skills: Must be a self-starter with the ability to work independently without continuous supervision. Must be a team player and have excellent interpersonal communication skills, especially with customers. Excellent organizational and administrative skills. Effective written and oral communication skills in English language. Ability to multi-task and maintain composure in stressful and demanding work environments. Ability to think forward and learn and apply new concepts quickly. Understand and follow all common and industry specific safety standards to protect personnel and assure network integrity / reliability. Communicate as required with multiple departments to optimize project scheduling, resolve roadblocks, and coordinate material deliveries. Use Hyperscale systems and applications to communicate with the customer as needed. Adhere to Hyperscale standards to ensure work meets customer quality requirements. Other US Citizenship is required Physical Requirements: Ability to lift and move heavy equipment (up to 50 lbs). Comfortable working in confined spaces and at heights. Ability to work in varying environmental conditions. Locations San Jose, CA area Los Angeles, CA North Dallas/Ft Worth area Reston, VA area Atlanta, GA Denver, CO Chicago, IL Prerequisites required training/certifications: Supplier is responsible for ensuring that Personnel have the necessary qualifications and certifications required to perform the Work described herein prior to beginning Work, including abiding by PPE requirements, CPR/First Aid, ergonomics, and any refresher training required to maintain such certifications, such as OSHA 10 and OSHA 30. Supplier is responsible for tracking and will pay for forty (40) hours of training required for the Work per 12-month period including training fees, all training time, and any travel expenses and compensable travel time required to attend training. Ericsson will be responsible for the time attending required weekly safety shorts and any additional training that is required for the Work and approved in advance by the Ericsson Resource Manager.

Job Title: Electronic Technician I Department: Quality Pay- $24-26/hr. Employment Type: Full-Time, Direct Hire or TTH The Electronic Technician I is responsible for testing, basic troubleshooting, and rework of electronic and mechanical assemblies in a manufacturing environment. This role supports product quality by performing in-circuit testing, functional testing, calibration, and basic rework activities while following established procedures and quality standards. The technician will work closely with cross-functional teams to ensure accurate testing, documentation, and equipment operation. Reporting Relationships Reports directly to the Quality Supervisor Works closely with Production, Engineering, and Quality teams Work Environment & Schedule Work performed primarily in a modern, temperature-controlled manufacturing facility Standard 8-hour workday, 5 days per week; overtime as required Reliable transportation required Key Responsibilities Testing & Rework Perform basic electronic and mechanical assembly rework under established guidelines Remove and replace through-hole and SMT components Conduct in-circuit testing (ICT), functional testing (FT), and calibration activities Set up and operate test fixtures and test stations safely and efficiently Assemble and test mechanical and electronic assemblies Troubleshooting & Documentation Perform basic troubleshooting of electronic assemblies Validate customer-reported issues on returned products and assist with repairs Accurately document test results, including pass/fail status and known causes Communicate recurring test or fixture issues to the Supervisor Quality & Compliance Follow IPC standards, work instructions, and ISO 9001 quality system requirements Maintain ESD compliance and follow all safety procedures Keep work areas clean, organized, and audit-ready Support Activities Assist with setup of equipment for new product introductions (NPI) and prototype builds Provide support to senior technicians when directed Perform other duties as assigned Qualifications Required High school diploma or equivalent 1-2 years of experience in electronic PCBA rework or electronics manufacturing Understanding of IPC SMT placement and soldering acceptability standards Familiarity with IPC J-STD-001 and IPC-7711/7721 Ability to identify electronic components Ability to read and understand assembly drawings and technical documentation Basic knowledge of digital and analog electronic circuitry Strong attention to detail and documentation accuracy Preferred IPC J-STD-001 and/or IPC-7711/7721 certification Additional experience troubleshooting electronic assemblies Skills & Competencies Basic electronic troubleshooting Soldering and desoldering (through-hole and SMT) Strong written and verbal communication Ability to prioritize tasks and work in a team environment Problem-solving and attention to detail Physical & Mental Requirements Ability to stand for extended periods Ability to lift up to 50 lbs Ability to distinguish colors, fine circuit detail, and tones Ability to work under magnification for extended periods Ability to function in a fast-paced, team-oriented environment Safety Requirements Eye protection required in manufacturing areas ESD protection required in manufacturing areas Tools & Equipment Used Soldering and desoldering stations Nano soldering station In-circuit test platforms and test stands Test fixtures (bed-of-nails) Electronic and mechanical hand tools Oscilloscopes, power supplies, frequency generators, digital analyzers ABOUT ACCURATE PERSONNEL Do you need your next job fast? Accurate Personnel is here to help! As an industry-leading full-service staffing agency, we have all the tools you need to start earning that next paycheck soon. Send us your application and our team will instantly get to work on finding you the right placement to fit your needs. Accurate Personnel has been a provider of temporary job services and direct hire search for 45 years. Our expertise has allowed us to grow from a regional Chicagoland office into a nationwide search firm that services over 500 clients while never losing sight of personalized service. Let Accurate work for you. Apply with us today! - Accurate Personnel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$33.42-$42.75 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Is this the role you are looking for If so read on for more details, and make sure to apply today. Safely maintain, repair and rehab equipment in multiple areas within the Maintenance Division; Plumbing, Kitchen Equipment Repair, HVAC/R, Aquatic Systems & Water Quality. Responsibilities: * Perform daily, weekly and monthly inspections of assigned equipment and locations * Perform rehab work on assigned equipment and locations * Maintain, install, repair and trouble-shoot various items, equipment and locations * Inspect equipment and locations for malfunctions and repair * Perform routine preventative maintenance on various pieces of equipment * Assist with keeping a daily duty log of maintenance work performed as well as accurate records of preventative maintenance * Effectively and professionally communicate and coordinate with other departments within the park. * Comply with company procedures, policies and safety standards * Help to ensure compliance with government codes and corporate mandates. xevrcyc * All other duties as assigned. Qualifications: * Knowledge of Plumbing, HVAC/R, Aquatic Systems and Water Quality * Should possess practical skills and willingness to learn in all of the respective areas; Plumbing, HVAC/R, Aquatic Systems, and Water Quality * Experience with electrical, plumbing & natural gas systems preferred * Ability and willingness to work any shift and on weekends and holidays as needed * Must be able to trouble-shoot clearly, calmly and safely in the presence of Guests and fellow Team Members * Must possess strong safety sensitivity & ability to work with many different types of devices * High School Diploma or equivalent * Must possess a valid Driver's License

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Field Service Technician to join their team. This is a unique opportunity for someone who thrives on travel, technical challenges, and making a real impact at customer sites across the U.S. and internationally. Why Consider This Opportunity? Work with Cutting-Edge Technology: You'll troubleshoot and program PLCs, including Siemens and Allen Bradley controllers, and set up advanced systems like Siemens LMV5. Diverse Environments: From power plants to ship engine rooms, every day brings new challenges and learning opportunities. Career Growth: Training and development opportunities, including working with industry-leading equipment and technologies. Key Responsibilities: Perform start-ups and commissioning of industrial pressure vessels and boilers at customer locations nationwide and abroad. Troubleshoot, program, and optimize PLCs (preferably with RS Logix500), HMIs, and combustion systems. Conduct operational testing and calibration of burners and fuel/air ratios using advanced diagnostic tools. Provide expert support to customers and field technicians, both onsite and remotely. Document technical procedures and contribute to instruction manuals for end-users. Maintain clear communication through trip reports and technical documentation. Qualifications and Skills: Bachelor's Degree in Engineering is a plus. 4+ years in field service experience, with strong PLC troubleshooting and programming skills. Hands-on expertise with pressure vessels, boilers, hydraulic and pneumatic systems, and combustion analyzers. Experience setting up Siemens LMV5 systems. Willingness to travel extensively (up to 90%), including occasional international assignments. Compensation Range: $38/hr - $42/hr Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Field Service Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

ICT (In-Circuit Test) Test Technician (1st shift) Nidec Mobility America Corporation(NMOA) has an immediate opportunity for an energetic and focused ICT Test Technician within our St. Charles, IL location. 1st shift (6a- 2:30p) with Overtime Available Saturdays (and possible some Sundays). A little about Nidec Mobility.. We are the North America headquarters for Nidec Mobility America (locations in Illinois, Michigan, Ohio, Canada, Mexico) and a leading Automotive Electronics Designer and manufacturer of sophisticated electronic sensing and control technology / components. We control the most discrete functions within an automobile, including: power system components, complex user interfaces, seat and power window switches, and instrument panel controls, electronic sensing/radar). Objective Under the general direction of the Mfg. Process Engineering Group Manager ensures that ICT failures are analyzed, root cause of the failure is identified and corrective action is implemented. Essential Responsibilities REQUIRES 5+ Years direct experience with AGILENT/KEYSIGHT 3070 in-circuit test experience to.. Perform visual inspection and electrical testing of all ICT failures. Identifies the root cause of the failure based on ICT output file and multi-meter/bridge readings. Identify soldering issues with the ICT failed boards based on knowledge of IPC-610 Nidec Mobility Quality Standards. Fixes the issues identified or instruct inspectors on how to fix the issue. Records the failure reason in the ICT test database. Setup ICT machine to run failed boards. Analyzes ICT first-pass yield and final yield using automated reports from ICT database and recommends corrective action to ICT technicians. Generate excel reports on a weekly basis about overall ICT rework work-in-process level. Maintain clean and organized work area at all times. Completes daily area clean up at the end of shift May participate in cross-training activities with other related positions Support / Participate in the Company's management and quality system including continuous improvement efforts Notify supervisors, group leaders or technicians of any problems or nonconforming product Support/Implement the Environmental policy as it pertains to work activities Perform other duties as required or assigned which are reasonably within the scope of the activities enumerated above Experience: 5+ Years direct experience with Agilent/Keysight 3070 in-circuit test experience Education: Associate's or 2 Year Degree Knowledge/Skills/Abilities: 5+ Years experience in an analysis/inspection role in electronics manufacturing Working Knowledge of troubleshooting electronic circuits Working knowledge of using Microsoft Windows and Microsoft Excel 3+ Years' experience in Solder inspection/repair Working knowledge of reading circuit diagrams NOTE: This position Is Not open to external sourcing (Recruiting agencies)