Research and development engineer jobs in Bethlehem, PA

Be part of a new team to expand successful new product line as Electro-Mechanical Engineer Join a team that wins Best Place to Work and truly values their employees in ways large corporations just can't. True combination of mechanical products with electrical and power electronic systems - both new product development and continuous improvement of existing designs. Provide solutions that enhance performance, reduce cost, and increase manufacturability. Qualifications: • BS/MS in Engineering (Mechanical, Electrical, or Electro-Mechanical preferred). • Understanding of power electronic systems and ability to interpret schematics. • Knowledge of machine shop practices and sheet metal fabrication. • Proficiency in SolidWorks, including the ability to manage large assemblies. • Skilled in AutoCAD, DraftSight, or similar 2D drafting software. • Experience in new product development from concept through production. Key Responsibilities • Create custom parts and assemblies for custom, made to order products Troubleshoot assembly with design changes and new product options. • Conduct structural analysis for static and dynamic loading conditions, improving product resistance in harsh conditions. • Work closely with purchasing of new or custom components. • Balance cost efficiency with quality. • Be a CI Champion in design and production quality and efficiencies.

APPLICATION INSTRUCTIONS: CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. If you are NOT a current employee or student, please click “Apply” and complete the application process for external applicants. JOB DESCRIPTION AND POSITION REQUIREMENTS: We are seeking a Research and Development Engineer to join our Strategic Navigation team of The Applied Research Laboratory (ARL) at Penn State and located in our Navigation Research and Development Division (NRDD) in Warminster, PA. The NRDD is focused on developing the most advanced navigation technologies in the world, built around unique laboratories specially designed to test the most precise navigation sensors and systems. The mission of the NRDD is to conduct new navigation technology research and development, systems engineering, and provide expert knowledge for our Navy, Army, and other U.S. government sponsors. As part of our team, you will research, develop, analyze, implement, and test new capabilities for current and future high accuracy navigation systems. ARL is an authorized DoD SkillBridge partner and welcomes all transitioning military members to apply. You will: Design algorithms for navigation systems for ground, air, sea, and undersea environment Perform navigation modeling and simulation (M&S) to support trade studies Analyze multi-sensor data to evaluate system performance Interact and collaborate regularly with a team of fellow engineers and scientists, program management, program sponsors and stakeholders Prepare research papers and make presentations related to work performed Document work through reports and presentations This job will be filled at multiple levels depending upon the successful candidate's education and experience. Minimally requires a Bachelor's degree in an engineering or science discipline. Additional experience and/or education are required for higher-level jobs. A degree in Electrical Engineering, Mechanical Engineering, Aeronautical Engineering, Aerospace Engineering, Applied Mathematics, Physics, Computer Science, or Computer Engineering is preferred. Additional responsibilities of higher level position in include: Investigate and evaluate applicability of theories and practices to the development of navigation systems Algorithmic development Independently lead specific tasks within project scope Required skills/knowledge include: Strong written, oral, and interpersonal communication skills Experience using MATLAB and other programming languages for design, modelling and simulation Preferred skills/experience include: Navigation Theory State Space Estimation and Control Theory Stochastic Processes Theory Data Fusion Filter Design Geophysical and earth sciences ARL at Penn State is an integral part of one of the leading research universities in the nation and serves as a University center of excellence in defense science, systems, and technologies with a focus in naval missions and related areas. You will be subject to a government security investigation, and you must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. FOR FURTHER INFORMATION on ARL, visit our web site at **************** **The proposed salary range may be impacted by geographic differential.** The salary range for this position, including all possible grades is: $76,700.00 - $129,500.00 Salary Structure - additional information on Penn State's job and salary structure. CAMPUS SECURITY CRIME STATISTICS: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. Employment with the University will require successful completion of background check(s) in accordance with University policies. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines Warminster, PA

Primary Duties & Responsibilities Lead development and optimization of SiC epitaxial growth processes, including Thickness and doping uniformity Defect reduction through process tuning Drive continuous improvement initiatives across epitaxy platforms Lead R&D projects, internal qualification efforts and facilitate seamless process transfer from R&D to production. Collaborate with substrate and epitaxy teams to establish correlations and enhance Epi quality. Interface with external vendors to identify and implement solutions aligned with product timelines and performance goals. Prepare technical reports and presentation, external publications and participate in conferences Education & Experience PhD degree in Materials Science, Electrical Engineering, Physics, or related field. 3+ years of hands-on experience in SiC epitaxy, preferably in a semiconductor manufacturing or R&D environment. Deep understanding of crystal defects and strategies for control in SiC epitaxy Experience with Epi reactor design and considerations Strong understanding of CVD reactor operations and epitaxial growth mechanisms. Familiarity with process modeling and simulation tools Experience with statistical data analysis and design of experiment Knowledge of scientific principles and practice of characterization techniques such as C-V, optical characterization, x-ray characterization, thickness, doping, roughness etc. Due to ITAR compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C. 1324b(a)(3). Skills Proven interpersonal and communication skills Excellent problem-solving, analytical, and communication skills. Ability to excel in a cross-organizational, cross-cultural, global team environment Ability to handle multiple and complex issues involving external and internal priorities Ability to work with employees and customers in a multi-cultural, global team environment Handle special assignments promptly and professionally Set a high standard of ethics, professionalism, leadership, and competency Demonstrates and promotes the Coherent Worldwide values: Customer First Honesty and Integrity Open Communications Teamwork Continuous Improvement and Learning Manage by the “Facts” A Safe, Clean and Orderly Workplace Working Conditions On-site in Easton, PA Cleanroom Physical Requirements Ability to work in cleanroom and production environment Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

R&D Engineer Department/Location: R&D/Pennsylvania Carson Helicopters is currently seeking talented individuals for a position on its R&D/Engineering team. You will work on designing, ground testing and flight-testing critical aerospace components for legacy aircraft. Responsibilities: Coordinate with other test engineers to design and implement instrumentation supporting ground test & flight test activities. Write test plans & reports in accordance with FAA guidelines to support certification efforts. Support flight test activities as necessary up to and including on-aircraft data collection Lead the analytical design of structural aerospace parts Complete CAD and create drawing packages to enable construction of structural aerospace parts Select and provide detailed specifications for the purchase of raw material/parts; interact with vendors to resolve technical issues Assist technicians in resolving technical questions in the manufacturing of composite and metal structures and assemblies. Develop and execute procedures for activities such as material qualification and equipment calibration Manage and track multiple priorities while maintaining a focus towards common project goals Seek out the solutions to technical problems with the local team along with the larger Carson Helicopters workforce. Use your well-rounded technical knowledge to display proficiency in basic structural sizing, mechanisms, and design while making development decisions based on cost and schedule considerations Develop and refine manufacturing assembly procedures Background Bachelor's degree in mechanical engineering, physics, aerospace engineering, or other engineering discipline 4+ years of experience with complex, multi-disciplinary structural projects, rotary wing experience preferred. Preferred Skills: Experience using and troubleshooting aircraft flight test instrumentation Experience in writing FAA approved test plans and test reports as well as interpreting and analyzing test results Ability to rapidly change roles and responsibilities while working in a high-paced, challenging work environment Experience working on complex instrumentation design projects Experience with production tooling or product design in either prototype or volume environments Strong working knowledge of composite structures analysis Solidworks or equivalent experience Able to work well in an integrated collaborative team environment including daily interactions with technicians, engineers, and managers Self-motivated and directed with keen attention to detail Ability to communicate clearly and accurately with a wide range of people Problem solving and critical thinking skills A positive, upbeat attitude Responsibilities and tasks outlined in this are not exclusive and may change as determined by the needs of the company. Carson Helicopters, Inc. is a veteran-owned company and is proud to be an Equal Opportunity employer committed to hiring veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or disability. This job description is not an offer of employment or employment contract.

Job DescriptionMechanical Design Engineer Needed in Bethlehem, PA! Our office is currently partnered with a leading company in Bethlehem, PA in their search for a Mechanical Design Engineer. Job Details: Schedule: Monday-Friday 8am-5pm Salary: $90,000-110,000 Job Type: Full-Time Location: Bethlehem, PA Responsibilities: Perform design calculations and create detailed 3D models and drawings using SolidWorks. Translate customer and industry specifications into final designs. Develop and maintain part and assembly libraries, BOMs, and technical documentation. Support quoting and design for valve components and assemblies. Collaborate with manufacturing to improve design efficiency and product performance. Maintain data within the Syteline ERP system and participate in testing and evaluation. Requirements: Bachelor's in Mechanical Engineering with 5+ years of experience. Proficient in SolidWorks (PDM preferred) and familiar with manufacturing processes (casting, machining, welding). Knowledge of ASME codes for valves, piping, or pressure vessels preferred. Strong understanding of material properties and component selection (force, torque, pressure). Proficient in Microsoft Word and Excel. PeopleShare is the leading Staffing Agency in the region and has temporary to hire and permanent jobs across 8 states. Our openings include receptionist, data entry, customer service, collections, office managers, call center, administrative assistant, accounts payable clerk, accounts receivable clerk, file clerk, warehouse, assembly, production, pickers, packers, forklift, machine operators, and maintenance mechanics. PeopleShare provides equal opportunities to all employees and applicants for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, genetic disposition, neurodiversity, disability, veteran status, or any other protected category or class under federal, state, and/or local laws. This policy applies to all locations and all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #IND14

in mechanical design and electrical fundamentals, preferably within the aviation or aerospace sector. You will work on complex assemblies that integrate mechanical structures, electrical components, and advanced lighting technologies for high-performance environments. Responsibilities * Design and develop electro-mechanical components and assemblies for aerospace display systems. * Perform mechanical analysis including material properties, thermal transfer, and structural integrity. * Apply electrical fundamentals to ensure proper integration of components such as wiring, connectors, and lighting systems. * Utilize SolidWorks for CAD modeling and detailed design documentation. * Collaborate with project engineers and cross-functional teams to meet performance, quality, and compliance standards. * Support testing, troubleshooting, and validation of designs. * Contribute to continuous improvement initiatives and product innovation. Essential Skills * 8+ years of engineering experience in electro-mechanical design. * Strong mechanical engineering foundation including materials, thermal analysis, and structural assessments. * Working knowledge of electrical principles and components. * Proficiency in CAD software, with SolidWorks preferred. * Experience in aerospace or defense manufacturing strongly preferred. * Ability to manage multiple priorities and adapt to a dynamic environment. * U.S. citizenship required. Additional Skills & Qualifications * Experience with illuminated panels, cockpit displays, or similar aerospace systems. * Familiarity with AS9100 quality standards. * Strong problem-solving skills and ability to handle multiple tasks. Work Environment This position requires 100% onsite work at our facility in Horsham, PA. The role involves working with advanced technologies and equipment in a high-performance environment. Job Type & Location This is a Permanent position based out of Horsham, PA. Pay and Benefits The pay range for this position is $120000.00 - $135000.00/yr. Implementing a Profit-sharing plan for the team after being acquired by Transdigm Workplace Type This is a fully onsite position in Horsham,PA. Application Deadline This position is anticipated to close on Dec 4, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

At Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We're a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you're looking for a challenge and meaningful role, you're in the right place. Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ About this role Dow has an exciting opportunity for a Senior Research & Development/Technical Service & Development Technician located in Collegeville, PA. This role: Provides technical support to Lead Scientists and Technologist Leaders in the preparation and execution of experimental activities and studies. Acts as primary focal point for technical support of a process, program, product, or application within the work group and occasionally for internal/external clients and customers. Provides technical support for product development, application development, technical service, and/or product or process research. This role requires that you gain proficiency through on-the-job training and experience. You need either deep skills in this discipline or knowledge of a range of processes, procedures, and systems. You also need a broad understanding of the job and know how to apply knowledge and skills to complete assigned tasks. You should understand how your team works with others to accomplish objectives and be able to exchange detailed, complicated information with other team members. It is your responsibility to evaluate analytical or scientific problems in unusual situations and select solutions based on established procedures. You will serve as an informal resource on operational, administrative, data organization, or coordination tasks for less experienced team members with no direct supervisory responsibilities. Your performance will impact the quality, timeliness, and effectiveness of your own work and your team's work. You should be able to modify work practices and processes to achieve results and/or improve efficiency. Responsibilities - Duties, projects, tasks, and activities you would be responsible for in this role Works as part of a team in a laboratory supporting chemists and engineers in developing, screening and commercializing new products and process. Manages and then safely executes laboratory work requests, maintaining and running relevant laboratory apparatus and testing equipment and documenting data. Develops experimental plans for review/approval by Lead Scientist or Technology Leader, and executes approved plans by performing routine and non-standard tasks or procedures of higher complexity. Achieves project goals using technical, role-specific skills and experience, and introduces new procedures for new instrument methods, equipment changes, or new equipment. Develops a specific expertise within the department and laboratory work group in specific procedures, equipment, or instruments. Acts responsible for calibration, safe operation and routine maintenance of simple and complex instruments, machinery, and system components, including production equipment. Updates personal knowledge for proper use of equipment via manuals and job aids, logs maintenance activities and calibration results as required. Communicates scientific observations to project team or principle investigator, and organizes and prepares data tables and charts for inclusion in supported studies. Qualifications A minimum of a High School Diploma/GED and 5 years of relevant working experience A minimum of an Associates degree in a science related discipline/Military Degree Equivalency (MDE) and 3 years of relevant work experience OR A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. Your Skills Laboratory Instrumentation: Ability to operate, calibrate, and maintain laboratory instruments and equipment, ensuring accurate measurements and reliable performance. Laboratory Safety: Knowledge and application of safety protocols, hazard identification, and compliance with regulatory standards to maintain a safe working environment. Analytical Thinking: Capacity to evaluate complex problems, interpret data, and select solutions based on established procedures and scientific reasoning. Technical Communication: Ability to clearly convey technical information, observations, and data through reports, charts, and verbal updates to scientists and team members. Organizing, Planning, and Prioritizing Work: Skill in structuring tasks, managing time, and prioritizing activities to meet project goals efficiently. Note: This role does not offer relocation assistance. Benefits - What Dow offers you We invest in you. Dow invests in total rewards programs to help you manage all aspects of you: your pay, your health, your life, your future, and your career. You bring your background, talent, and perspective to work every day. Dow rewards that commitment by investing in your total wellbeing. Here are just a few highlights of what you would be offered as a Dow employee: Equitable and market-competitive base pay and bonus opportunity across our global markets, along with locally relevant incentives. Benefits and programs to support your physical, mental, financial, and social well-being, to help you get the care you need...when you need it. Competitive retirement program that may include company-provided benefits, savings opportunities, financial planning, and educational resources to help you achieve your long term financial-goals. Employee stock purchase programs (availability varies depending on location). Student Debt Retirement Savings Match Program (U.S. only). Dow will take the value of monthly student debt payments and apply them as if they are contributions to the Employees' Savings Plan (401(k)), helping employees reach the Company match. Robust medical and life insurance packages that offer a variety of coverage options to meet your individual needs. Travel insurance is also available in certain countries/locations. Opportunities to learn and grow through training and mentoring, work experiences, community involvement and team building. Workplace culture empowering role-based flexibility to maximize personal productivity and balance personal needs. Competitive yearly vacation allowance. Paid time off for new parents (birthing and non-birthing, including adoptive and foster parents). Paid time off to care for family members who are sick or injured. Paid time off to support volunteering and Employee Resource Group's (ERG) participation. Wellbeing Portal for all Dow employees, our one-stop shop to promote wellbeing, empowering employees to take ownership of their entire wellbeing journey. On-site fitness facilities to help stay healthy and active (availability varies depending on location). Employee discounts for online shopping, cinema tickets, gym memberships and more. Additionally, some of our locations might offer: Transportation allowance (availability varies depending on location) Meal subsidiaries/vouchers (availability varies depending on location) Carbon-neutral transportation incentives e.g. bike to work (availability varies depending on location) Join our team, we can make a difference together. About Dow Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ As part of our dedication to inclusion, Dow is committed to equal opportunities in employment. We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on ************ Dow is an Equal Employment Opportunity employer and is committed to providing opportunities without regard for race, color, religion, sex, including pregnancy, sexual orientation, or gender identity, national origin, age, disability and genetic information, including family medical history. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may call us at 1-833-My Dow HR ************** and select option 8.

Job Description T&M Associates is seeking a multi-talented Staff Engineer 2 to join our Water Market! This is an excellent opportunity for an engineer looking to advance their career while learning and growing within the framework of a collaborative consulting firm. This role will provide exposure to a variety of water and wastewater projects including treatment facilities, pumping stations, linear infrastructure, condition assessments, and field inspections. The primary focus will be on project design assistance for wastewater treatment plant (WWTP) upgrades and improvements, sewer system extensions (including design, permitting, and construction management), and waterline extensions for municipal clients such as Pocono Township, Mountaintop Joint Area Sanitary Authority, and Bangor Borough Sewer Authority. Key Responsibilities Support the design and development of water and wastewater treatment facility projects. Provide project design assistance for WWTP upgrades, sewer system extensions, and waterline extensions. Prepare plans, design calculations, technical reports, and construction documents. Assist with permitting, construction management, and coordination with regulatory agencies. Conduct field inspections, condition assessments, and site visits as required. Collaborate with project managers and senior staff across multi-disciplinary teams. Ensure all work is performed accurately, efficiently, and in compliance with client and regulatory standards. Key Qualifications Bachelor's Degree in Civil Engineering or related field required. 3-5 years of related experience in water/wastewater engineering. Engineer-in-Training (EIT) certification preferred, with the goal of obtaining a Professional Engineer (PE) license. Proficiency in AutoCAD and Civil 3D required. Strong command of design principles with ability to develop neat and accurate design calculations. Highly organized with ability to manage multiple priorities in a dynamic environment. Strong analytical, interpersonal, written, and verbal communication skills. Team-oriented mindset with ability to work effectively with peers, senior staff, and clients. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $79,000 - $103,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate's experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities - all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at *********************** #LI-HYBRID

Spectrum Vascular is an innovative medical device company focused on vascular access and medication management. Our mission is to improve the lives of patients worldwide by providing caregivers with high quality, innovative products with exceptional customer service. We are a company that was formed through the acquisition of a portfolio of trusted products that have been widely used by customers for decades. Innovation has been a core strategic pillar throughout our history and many of our products have been designed to deliver antimicrobial and antithrombogenic protection or to support certain patient populations such as those who are critically ill and pediatrics. This role represents a unique opportunity to join a dynamic and growing team with established products and an entrepreneurial mindset. Role Description: The manufacturing engineer is responsible for designing, implementing, and improving manufacturing processes to enhance efficiency, quality, and safety in production environments. This role involves collaboration with various functions to ensure that products are manufactured to the highest standards while optimizing costs and resources. Role Responsibilities: Process Design and Implementation: Develop and implement manufacturing processes and work instructions to improve production efficiency and product quality. Automation and Technology: Research and integrate automation techniques and new technologies to enhance manufacturing operations. Quality Control: Evaluate and improve quality control processes, ensuring compliance with industry standards and regulations. Data Analysis: Analyze production data and workflows to identify areas for improvement and provide management with actionable insights. Collaboration: Work closely with design, procurement, and quality assurance teams to ensure seamless production operations and product compatibility. Cost Estimation: Review and calculate production costs, labor, and material requirements to assist in budgeting and resource allocation. Training and Mentorship: Provide training and support to production staff on new processes and equipment to ensure effective implementation. Role Qualifications: Education: Bachelor's degree in Engineering, or a related field. Previous experience in a manufacturing environment, with a focus on startup of new production lines, moving of existing production lines, process improvement and project management. Technical Skills: Proficiency in CAD software, manufacturing technologies, Lean Six Sigma, and quality control methodologies. Problem-Solving: Strong analytical and problem-solving skills, with the ability to work under pressure and meet deadlines. Communication: Excellent verbal and written communication skills, with the ability to collaborate effectively across departments. Work Environment: On site in our Lehigh Valley manufacturing facility, with occasional office work. Some travel may be required to visit suppliers or customers, especially in the first 6-9 months. Spectrum Vascular is an Equal Opportunity Employer and committed to creating a diverse and inclusive company culture. Spectrum Vascular does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law.

The Manufacturing Engineer will play a crucial role in the design, optimization, and troubleshooting of manufacturing processes to ensure efficient, safe, and high-quality production of pharmaceutical products. This position requires hands on trouble shooting of electromechanical packaging equipment. This position involves close collaboration with cross-functional teams to support process improvement, compliance with regulatory requirements, and continuous improvement in a highly regulated environment. Key Responsibilities: Process Optimization: Design, develop, and implement processes to improve manufacturing efficiency, reduce waste, and enhance product quality. Troubleshoot and resolve production issues to minimize downtime and ensure smooth operations. Equipment and Technology Management: Evaluate, select, and oversee the installation and maintenance of manufacturing equipment, ensuring they are functioning according to specifications and industry standards. Compliance and Documentation: Ensure all manufacturing activities comply with Good Manufacturing Practices (GMP), FDA regulations, and other relevant standards. Maintain accurate records, reports, and documentation in accordance with regulatory guidelines. Author technical documents such as Change Controls and WRKI's, Review MPR's etc. Quality Control and Assurance: Collaborate with quality assurance teams to identify and implement corrective actions, conduct root cause analysis for quality issues, and ensure continuous product quality in the production process. Project Management: Lead or participate in cross-functional teams for process improvement, facility upgrades, or new product introduction projects. Provide technical guidance on new product development and scale-up processes. Training and Support: Train and mentor operators and technicians on new processes, equipment, and safety procedures to ensure effective and efficient production workflows. Continuous Improvement: Identify opportunities for process automation, cost reduction, and other performance improvements. Foster a culture of continuous improvement using Lean, Six Sigma, or similar methodologies. Troubleshooting: Provide engineering support during production to resolve mechanical, electrical, or process-related problems in a timely manner. Safety and Risk Management: Promote a safe working environment by adhering to health and safety protocols and identifying any potential risks or hazards in the manufacturing processes. Required Qualifications: Bachelor's degree in Mechanical Engineering, Chemical Engineering, Pharmaceutical Engineering, or a related field. (Degree in progress will be considered) 3+ years of experience in a manufacturing engineering role, preferably within the pharmaceutical or life sciences industry. Strong understanding of pharmaceutical manufacturing processes, equipment, and regulatory requirements (FDA, GMP, etc.). Experience with process design, process control, and equipment validation in a regulated manufacturing environment. Proficiency in the use of engineering software, such as AutoCAD, SolidWorks, or process simulation tools. Familiarity with Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies. Excellent problem-solving, analytical, and troubleshooting skills. Strong communication and collaboration skills with the ability to work across cross-functional teams. Knowledge of statistical process control (SPC), root cause analysis, and design of experiments (DOE) is a plus. Preferred Qualifications: Experience in process validation and equipment qualification (IQ/OQ/PQ). Familiarity with automation systems and manufacturing execution systems (MES). Certification in Lean or Six Sigma methodologies. Physical Requirements: Ability to work in a cleanroom environment and follow strict hygiene protocols. Ability to lift up to 25 lbs. and perform tasks that may require standing, walking, or bending for extended periods. SUPERVISORY RESPONSIBILITIES Supervision of outside contractors, including OEM technicians, specialists and facility contractors where necessary. DRESS CODE: This position will require business casual dress, along with company provided uniforms. The uniforms will be required when production support activities are the primary focus for the day/based on company needs.

Job Description What we do... HindlePower has been designing and manufacturing industrial (non-commercial) battery chargers and dc power systems for the utility industry for over 35 years. Our staff and products serve the power generation and distribution market, switchgear OEMs, power substations, the oil & gas industry, and various transportation maintenance facilities. We are the leaders in our industry and have customers in all 50 states plus additional countries worldwide. What you'll do... HindlePower is seeking a Manufacturing Engineer to join our team. This key position is responsible for leading and executing plant-wide initiatives focused on operational excellence and waste elimination. This role champions lean manufacturing principles and works collaboratively with cross-functional teams to improve safety, quality, productivity, and cost. Own and lead continuous improvement (CI) initiatives across the manufacturing plant. Plan, facilitate, and follow up on Kaizen events, root cause analysis, and process redesign. Develop and implement standard work to ensure process consistency and repeatability. Identify and eliminate waste through lean tools and methods such as 5S, visual management, and Poka-Yoke methodology. Collaborate with production, quality, engineering, and maintenance teams to drive improvements in key performance indicators (KPIs). Support process standardization, layout optimization, and workflow efficiency. Specify and support tooling, fixtures, and equipment used in manufacturing operations. Provide hands-on support on the production floor to troubleshoot and resolve process or assembly issues. Promote a culture of continuous improvement and employee engagement at all levels. Analyze performance data and trends to prioritize improvement opportunities. Provide coaching and training on lean tools, CI methodology, new processes and work instructions. What you bring... Experience & Education Bachelor's degree in manufacturing engineering, Industrial Engineering, or a related field. 5+ years of experience in manufacturing or process improvement role. Proven experience leading CI or Lean Manufacturing initiatives. Technical Proficiency Strong knowledge of lean principles (e.g., Kaizen, standard work, 5S, root cause analysis). Knowledge of sheet metal and/or circuit board assembly preferred. Familiarity with weld, paint, and assembly operations is highly preferred. Proficiency with data analysis, time studies, and process mapping. CAD knowledge is preferred. Professional Skills Excellent problem-solving, facilitation, and project management skills. Effective communication and collaboration abilities across multiple departments. Strong documentation habits; clear, concise communication across engineering and manufacturing teams. Structured problem solving, ownership mindset, and attention to detail. A few things about us... Our commitment to quality is evident in our highly skilled colleagues and our exceptional approach to customer service that sets us apart. We believe in rewarding hard work and offering competitive compensation, comprehensive health, vision, and dental benefits, along with a 401k plan that includes employer matching and a gain-sharing program. At our core, we are driven by integrity and quality, constantly seeking innovative solutions and improvements. Our unique culture thrives on accountability and self-initiative, empowering every employee to make impactful contributions. In our organizational structure, your voice is heard, and your efforts are recognized. We celebrate our achievements together, whether it's over a complimentary lunch in our cafeteria or through our various team-building activities. We are a four-time Top Workplace in the Lehigh Valley and were named one of IndustryWeek's 'Best Plants'. We are proud of our accomplishments and are continually striving to do better. We value our employees and trust they hold these key characteristics: Initiative... we see it, we do it Ownership... I've got it, you don't need to think about it Integrity... decisions are based on looking at the whole picture Attitude... anything can be done Virtue... honesty, good deeds, kindness, and appreciation Teamwork... we before I

Why join us? Our purpose is to design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of MillerKnoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. And our success allows MillerKnoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. Engineering Lead - MillerKnoll Specials Location: East Greenville, PA WHY JOIN US? Our purpose is to design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of MillerKnoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. Our success allows MillerKnoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. POSITION PROFILE The MillerKnoll Engineering Lead for the North America Specials Operations is responsible for the people, process, and technology used to meet dealer demand within their scope of responsibility. Customer satisfaction is a top priority for this role, with a focus on first time quality, speed, and design integrity in alignment with the MillerKnoll brand. In addition, cultivating a positive, transparent, and accountable culture that allows us to continuously improve and remain an industry leader. ESSENTIAL JOB RESPONSIBILITIES • Capable of navigating corporate organizational structure and build constructive relationships broadly. • Articulates a clear vision and expectations to drive performance and accountability throughout the team. • Ability to build fluid and effective relationship with customer facing teams, Operations/supply base, and other downstream departments to ensure flow of orders and maintain high levels of customer satisfaction. • Encourages and sponsors continuous improvement of knowledge transfer, error proofing, and process standardization through effective problem solving. • Actively working to enhance designs, tools, and technologies used in the Specials process. • Will require a working knowledge of the Specials process from quote response through order execution. • First responder for order stops, design complexity, or clarification of existing orders. • Responsible for staffing, team structure, and team dynamics. • Within assigned scope, responsible for the product design modification, bill of material updates, and overall order flow. • Active part of a broader global leadership team, responsible for sharing resources to meet customer demand, and collaborating to optimize our processes and capabilities globally. • Can effectively market and advocate “what we do” to diverse audiences. REQUIRED SKILLS • Proven servant leadership style, with an emphasis on human development and optimizing the performance of every individual on the team. • Change agent with a passion for training / helping others; interactions are handled with kindness and humility. • Strong onsite presence required. • Remains calm and professional under pressure. • Driver of department goals and strategy. • Ability to prioritize opportunities and quantify return on investment for initiatives. • Familiarity with MKPS/TPS philosophies and passion for continuous improvement and problem solving. • Action oriented, focuses on and correctly delivers critical details; follows through. • Early adopter of new technologies. • Ability to think logically, analytically, and innovatively to simplify and solve process and design problems. • Strong oral and written communication skills to facilitate interactions with colleagues at all levels of the organization, suppliers, and external MillerKnoll customers. EXPERIENCE CRITERIA • Engineering/ technical degree or equivalent professional experience required • Operational experience preferred • Minimum 5 years of professional experience Who We Hire? Simply put, we hire qualified applicants representing a wide range of backgrounds and abilities. MillerKnoll is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veterans from every branch of military service, and more. Here, you can bring your whole self to work. We're committed to equal opportunity employment, including veterans and people with disabilities. This organization participates in E-Verify Employment Eligibility Verification. In general, MillerKnoll positions are closed within 45 days and are open for applications for a minimum of 5 days. We encourage our prospective candidates to submit their application(s) expediently so as not to miss out on our opportunities. We frequently post new opportunities and encourage prospective candidates to check back often for new postings. MillerKnoll complies with applicable disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact MillerKnoll Talent Acquisition at careers_********************.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Location: Ivyland, PA (Onsite) About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview Being recognized as a leader in our industry is a testament to our unwavering commitment to delivering high-quality products and services. Within our Milton Roy division, we set the standard for excellence and understand the pivotal role manufacturing processes play in driving operational success. We believe progress isn't just a concept-it's the tangible improvements that begin with you. We're seeking a Manufacturing Engineer who thrives in a fast-paced, collaborative environment and is ready to make an impact from day one. In this role, you'll tackle real-world challenges on the production floor, design custom fixtures, support new product launches, and help shape the future of our manufacturing processes. You'll lead the execution and optimization of manufacturing systems across our production lines, suppliers, customers, and partners-analyzing methods, redesigning processes, and driving improvements in cost, efficiency, and quality, all while maintaining safety and compliance standards. Whether you're early in your career with a passion for hands-on problem solving or bring a few years of experience applying engineering principles in manufacturing, we value your creativity, initiative, and the drive to turn ideas into results. Responsibilities Engineering: Plan, coordinate, and continuously improve manufacturing processes by leveraging knowledge of product design, materials, tooling, and production capabilities; analyze workflow and workforce utilization to optimize space and efficiency, while actively supporting production and resolving engineering issues with a proactive, hands-on approach. Design and Analysis: Support new engineering development by contributing to design reviews, optimizing equipment and workspace layouts for efficiency, and collaborating with planning and design teams to ensure product and tooling designs enable effective and streamlined production methods. Communication and Documentation: Collaborate cross-functionally with management, engineering, suppliers, and production teams to align manufacturing capabilities and schedules, resolve issues, communicate plans effectively, and support production through data analysis and reporting. Process Improvement: Ensure manufacturing processes and procedures align with company standards by leading continuous improvement initiatives rooted in Lean Six Sigma, redesigning workflows to boost productivity, and maintaining a strong focus on quality, ergonomics, and safety across multiple light industrial production lines. Cost Reduction: Manage production costs and schedules by evaluating labor, materials, and equipment needs, overseeing maintenance and repairs, and supporting cost reduction initiatives through effective communication with suppliers and resolution of technical issues related to drawings, BOMs, and material specifications. Quality Control: Support quality initiatives by actively participating in engineering and quality discussions and recommending improvements to enhance production standards and outcomes. Training and Development: Engage in ongoing training to strengthen engineering and product knowledge, attend monthly EHS sessions, and consistently follow workplace policies and procedures to support a safe, efficient, and compliant work environment. Safety Compliance: Promote a safe and compliant work environment by following all safety guidelines-including proper PPE use-ensuring designs and processes meet safety and environmental standards and promptly reporting any hazards or incidents. Cleanliness and Organization: Maintain a clean, organized workspace by consistently applying 5S principles-Sort, Set in Order, Shine, Standardize, and Sustain-to support efficiency and safety in daily operations. Requirements Bachelor's Degree in Engineering 1+ years' experience as a manufacturing / industrial engineer and experience with CAD Software 1+ years of experience in lean manufacturing, VSM, Kaizen, 5s, etc. 1+ years of experience implementing cost reduction and process improvement initiatives 1+ years' experience launching new products into production and familiarity with fixture and test equipment designs and construction Core Competencies Leadership & Collaboration; Demonstrates strong leadership and collaborative abilities, excels in teamwork, and communicates effectively across all levels to drive shared goals. Efficiency & Productivity; Maintains a results-driven mindset focused on streamlining processes, enhancing operational efficiency, and maximizing productivity. Analytical & Logical Thinking; Applies sharp analytical skills and logical reasoning to assess complex challenges and develop practical, data-informed solutions. Project Management & Execution; Manages multiple priorities with confidence, drives projects from concept to completion, and takes ownership of outcomes with minimal oversight. Communication & Problem Solving; Communicates clearly and proactively, identifies issues early, and implements innovative solutions to resolve problems and improve performance. Preferences Bachelor degree in Mechanical, Manufacturing or Industrial Engineering SolidWorks, and AutoCAD Robotics experience Travel & Work Arrangements Fully site based Climate controlled manufacturing plant Protective eyewear and footwear required What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************* APPLY NOW

R&D Engineer Department/Location: R&D/Pennsylvania Carson Helicopters is currently seeking talented individuals for a position on its R&D/Engineering team. You will work on designing, ground testing and flight-testing critical aerospace components for legacy aircraft. Responsibilities: Coordinate with other test engineers to design and implement instrumentation supporting ground test & flight test activities. Write test plans & reports in accordance with FAA guidelines to support certification efforts. Support flight test activities as necessary up to and including on-aircraft data collection Lead the analytical design of structural aerospace parts Complete CAD and create drawing packages to enable construction of structural aerospace parts Select and provide detailed specifications for the purchase of raw material/parts; interact with vendors to resolve technical issues Assist technicians in resolving technical questions in the manufacturing of composite and metal structures and assemblies. Develop and execute procedures for activities such as material qualification and equipment calibration Manage and track multiple priorities while maintaining a focus towards common project goals Seek out the solutions to technical problems with the local team along with the larger Carson Helicopters workforce. Use your well-rounded technical knowledge to display proficiency in basic structural sizing, mechanisms, and design while making development decisions based on cost and schedule considerations Develop and refine manufacturing assembly procedures Background Bachelor's degree in mechanical engineering, physics, aerospace engineering, or other engineering discipline 4+ years of experience with complex, multi-disciplinary structural projects, rotary wing experience preferred. Preferred Skills: Experience using and troubleshooting aircraft flight test instrumentation Experience in writing FAA approved test plans and test reports as well as interpreting and analyzing test results Ability to rapidly change roles and responsibilities while working in a high-paced, challenging work environment Experience working on complex instrumentation design projects Experience with production tooling or product design in either prototype or volume environments Strong working knowledge of composite structures analysis Solidworks or equivalent experience Able to work well in an integrated collaborative team environment including daily interactions with technicians, engineers, and managers Self-motivated and directed with keen attention to detail Ability to communicate clearly and accurately with a wide range of people Problem solving and critical thinking skills A positive, upbeat attitude Responsibilities and tasks outlined in this are not exclusive and may change as determined by the needs of the company. Carson Helicopters, Inc. is a veteran-owned company and is proud to be an Equal Opportunity employer committed to hiring veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or disability. This job description is not an offer of employment or employment contract.

in mechanical design and electrical fundamentals, preferably within the aviation or aerospace sector. You will work on complex assemblies that integrate mechanical structures, electrical components, and advanced lighting technologies for high-performance environments. Responsibilities * Design and develop electro-mechanical components and assemblies for aerospace display systems. * Perform mechanical analysis including material properties, thermal transfer, and structural integrity. * Apply electrical fundamentals to ensure proper integration of components such as wiring, connectors, and lighting systems. * Utilize SolidWorks for CAD modeling and detailed design documentation. * Collaborate with project engineers and cross-functional teams to meet performance, quality, and compliance standards. * Support testing, troubleshooting, and validation of designs. * Contribute to continuous improvement initiatives and product innovation. Essential Skills * 8+ years of engineering experience in electro-mechanical design. * Strong mechanical engineering foundation including materials, thermal analysis, and structural assessments. * Working knowledge of electrical principles and components. * Proficiency in CAD software, with SolidWorks preferred. * Background in aerospace or defense manufacturing strongly preferred. * Ability to manage multiple priorities and adapt to a dynamic environment. * U.S. citizenship required. Additional Skills & Qualifications * Experience with illuminated panels, cockpit displays, or similar aerospace systems. * Familiarity with AS9100 quality standards. * Strong problem-solving skills and ability to handle multiple tasks. Work Environment This position requires 100% onsite work at our facility in Horsham, PA. The role involves working with advanced technologies and equipment in a high-performance environment. Job Type & Location This is a Permanent position based out of Horsham, PA. Pay and Benefits The pay range for this position is $120000.00 - $135000.00/yr. Implementing a Profit-sharing plan for the team after being acquired by Transdigm Workplace Type This is a fully onsite position in Horsham,PA. Application Deadline This position is anticipated to close on Dec 4, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

At Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We're a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you're looking for a challenge and meaningful role, you're in the right place. About you and this role - What you would do in this role Dow has exciting opportunities for new graduate PhD scientists and Engineers interested in careers in Research and Development (R&D), as well as in other functions including Manufacturing & Engineering (M&E), Integrated Supply Chain (ISC), and Information Systems (IS) aligned with various business units in Texas, Michigan, Pennsylvania, and other locations in North America. As a PhD scientist or engineer, you will be responsible for solving diverse and open-ended problems, driving initiatives that provide business and customer value and contribute to intellectual capital, and incorporating innovative technologies into practice. You will have the opportunity to develop broad and deep technical skills as an industrial researcher, collaborate across Dow teams and functions, and contribute to Dow's business and sustainability goals. Please apply to this job posting if you have already been interviewed by a Dow recruiter on campus or virtually. After you apply, you will be contacted directly to arrange on-site interview(s) if specific positions are identified that fit your qualifications. Please keep in contact with your campus recruiter for status updates in the interim. For more information about Science and Sustainability at Dow, visit our website. Qualifications - Required education, experience, knowledge, skills, and abilities that are needed for this role (must haves). * A PhD in Chemistry, Chemical Engineering, Mechanical Engineering, Materials Science, Polymer Science, Data Science, Statistics or other engineering or science-related discipline is required. * New graduates, those that expect to graduate by December 2026, and post-doctoral candidates should apply. Skills: The following skills are necessary: * Problem-Solving Skills: The role requires PhD scientists and engineers to solve diverse and open-ended problems, which necessitates strong adaptability, learning agility, and analytical and problem-solving abilities. * Technical Skills: Developing broad and deep technical skills as an industrial researcher is a key aspect of the role. This includes expertise in Chemistry, Chemical Engineering, Mechanical Engineering, Materials Science, Polymer Science, Data Science, Statistics, or other related disciplines. * Innovation and Technology Integration: Incorporating innovative technologies into practice is a significant part of the job, highlighting the need for skills in ideation, innovation, and technology integration. * Collaboration and Teamwork: The role involves collaborating across Dow teams and functions, which requires excellent teamwork and collaboration skills. * Safety Mindset: This role requires a strong safety mindset, which is a pillar of the culture at Dow. * Business and Customer Value Orientation: Driving initiatives that provide business and customer value is crucial, indicating the importance of understanding business needs and customer focus. Preferred Qualifications * A minimum GPA of 2.700 (on a scale of 4.000) is preferred Additional notes * Some Dow facilities are positioned near navigable waterways and are deemed TWIC facilities as per the Maritime Transportation Security Act. Please review this FAQ on TWIC credentialing and acceptable documentation. If placed at a location that is deemed a TWIC facility, you must be willing and able to adhere to the TWIC credentialing requirements. * The campus graduate recruitment process typically starts in the Summer time (July 2025) and will continue into early the following year (Jan/Feb 2026) until all full-time positions are filled. After you apply, you will be contacted directly if specific positions are identified that fit your qualifications. Benefits - What Dow offers you We invest in you. Dow invests in total rewards programs to help you manage all aspects of you: your pay, your health, your life, your future, and your career. You bring your background, talent, and perspective to work every day. Dow rewards that commitment by investing in your total wellbeing. Here are just a few highlights of what you would be offered as a Dow employee: * Equitable and market-competitive base pay and bonus opportunity across our global markets, along with locally relevant incentives. * Benefits and programs to support your physical, mental, financial, and social well-being, to help you get the care you need...when you need it. * Competitive retirement program that may include company-provided benefits, savings opportunities, financial planning, and educational resources to help you achieve your long term financial-goals. * Employee stock purchase programs (availability varies depending on location). * Student Debt Retirement Savings Match Program (U.S. only). * Dow will take the value of monthly student debt payments and apply them as if they are contributions to the Employees' Savings Plan (401(k)), helping employees reach the Company match. * Robust medical and life insurance packages that offer a variety of coverage options to meet your individual needs. Travel insurance is also available in certain countries/locations. * Opportunities to learn and grow through training and mentoring, work experiences, community involvement and team building. * Workplace culture empowering role-based flexibility to maximize personal productivity and balance personal needs. * Competitive yearly vacation allowance. * Paid time off for new parents (birthing and non-birthing, including adoptive and foster parents). * Paid time off to care for family members who are sick or injured. * Paid time off to support volunteering and Employee Resource Group's (ERG) participation. * Wellbeing Portal for all Dow employees, our one-stop shop to promote wellbeing, empowering employees to take ownership of their entire wellbeing journey. * On-site fitness facilities to help stay healthy and active (availability varies depending on location). * Employee discounts for online shopping, cinema tickets, gym memberships and more. * Additionally, some of our locations might offer: * Transportation allowance (availability varies depending on location) * Meal subsidiaries/vouchers (availability varies depending on location) * Carbon-neutral transportation incentives e.g. bike to work (availability varies depending on location) Join our team, we can make a difference together. About Dow Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 31 countries and employ approximately 35,900 people. Dow delivered sales of approximately $45 billion in 2023. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ As part of our dedication to the diversity of our workforce, Dow is committed to equal opportunities in employment. We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on ************ Dow is an Equal Employment Opportunity employer and is committed to providing opportunities without regard for race, color, religion, sex, including pregnancy, sexual orientation, or gender identity, national origin, age, disability and genetic information, including family medical history. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may call us at 1-833-My Dow HR ************** and select option 8.

Job Description T&M Associates is seeking a multi-talented Staff Engineer to join T&M Associates! This is an excellent opportunity for an engineer early in their career to learn and grow within the framework of an engineering consulting firm. Responsibilities would include providing support engineering services to various departments in the organization. We are accepting applications from May 2026 graduates who are eager to launch their careers with T&M. When submitting your application, please specify the T&M office location and market you are most interested in. You may select all that apply to be considered for opportunities across multiple teams and locations. Qualifications Bachelor's degree in either Civil Engineering or related field is required. 1-2 years of related experience is preferred. Relevant internship experience can be substituted for experience. Engineer in Training certification is preferred with the goal to obtain a Professional Engineer's License. Exposure and some experience in GIS, AutoCAD and Civil 3D is essential. Detail oriented with a strong command of design principles and the ability to develop neat and accurate design calculations. Ability to organize and manage multiple priorities. Excellent analytical, interpersonal, writing, and verbal communication skills are required. Ability to work with peers and senior management and be a team player. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $72,000 - $85,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate's experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities - all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at *********************** #LI-HYRBID

Primary Duties & Responsibilities Product development - 70% Responsible for optical modeling, optical design and design review, ODVT. Contribute optical responses in RFI/RFQ. Develop new optical module or subsystem specifications and verification requirements. Work with NPI team to transfer design to manufacture. Legacy Sustaining - 10% Take ownership technical approval on component PCNs. Take technical ownership on optical component introduction for cost reduction. Support and complete technical issues, RMA from manufacture of legacy products. Technical Development - 20% Investigate new micro-optical integrated modules or EDFA related optical technologies. Support feasibility studies by applying new techniques or technologies to existing and future products. Investigate technologies that improve product density via reduced power consumption and physical size Education & Experience BSc/MSc in Optics, Electro-optics, Physics or Electrical Engineering with strong optics and fiber optic background required. More than 5 years of experience in optical simulation and design in integrated sub-system including Terminal card, In-Line card, ROADM card. More than 10 years of experience in optical simulation and design in optical functional modules including EDFA/OCM/OTDR. More than 10 years of experience with key optical components used in transport systems including WSS/OSC, etc. More than 8 years of experience with product development processes and new product transfer to manufacturing Skills Experience with optical free-space simulation tools such as Zemax. Experience in test script development for ODVT testing like Python, etc. Good communication skills and team work capability. Proficient in written and oral English. Quick learning and strong adoption in new team. Demonstrated ability to solve complex issues. Working Conditions May require occasional off-site meetings or travel Regular use of a computer and other office equipment is necessary Interaction with team members and external contacts is a regular part of the job May require occasional overtime and flexibility in work hours to accommodate the executive's needs Physical Requirements Sitting for extended periods while working on a computer or conducting meetings. Use of hands and fingers for typing, writing, and handling documents. Occasional lifting of objects or materials up to 20 pounds for administrative tasks. Ability to communicate verbally and in writing. Mobility within the office environment to attend meetings or interact with colleagues. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Manufacturing Engineer BH Job ID: 3404 SF Job Req ID: 16085 Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Location: Ivyland, PA (Onsite) About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview Being recognized as a leader in our industry is a testament to our unwavering commitment to delivering high-quality products and services. Within our Milton Roy division, we set the standard for excellence and understand the pivotal role manufacturing processes play in driving operational success. We believe progress isn't just a concept-it's the tangible improvements that begin with you. We're seeking a Manufacturing Engineer who thrives in a fast-paced, collaborative environment and is ready to make an impact from day one. In this role, you'll tackle real-world challenges on the production floor, design custom fixtures, support new product launches, and help shape the future of our manufacturing processes. You'll lead the execution and optimization of manufacturing systems across our production lines, suppliers, customers, and partners-analyzing methods, redesigning processes, and driving improvements in cost, efficiency, and quality, all while maintaining safety and compliance standards. Whether you're early in your career with a passion for hands-on problem solving or bring a few years of experience applying engineering principles in manufacturing, we value your creativity, initiative, and the drive to turn ideas into results. Responsibilities * Engineering: Plan, coordinate, and continuously improve manufacturing processes by leveraging knowledge of product design, materials, tooling, and production capabilities; analyze workflow and workforce utilization to optimize space and efficiency, while actively supporting production and resolving engineering issues with a proactive, hands-on approach. * Design and Analysis: Support new engineering development by contributing to design reviews, optimizing equipment and workspace layouts for efficiency, and collaborating with planning and design teams to ensure product and tooling designs enable effective and streamlined production methods. * Communication and Documentation: Collaborate cross-functionally with management, engineering, suppliers, and production teams to align manufacturing capabilities and schedules, resolve issues, communicate plans effectively, and support production through data analysis and reporting. * Process Improvement: Ensure manufacturing processes and procedures align with company standards by leading continuous improvement initiatives rooted in Lean Six Sigma, redesigning workflows to boost productivity, and maintaining a strong focus on quality, ergonomics, and safety across multiple light industrial production lines. * Cost Reduction: Manage production costs and schedules by evaluating labor, materials, and equipment needs, overseeing maintenance and repairs, and supporting cost reduction initiatives through effective communication with suppliers and resolution of technical issues related to drawings, BOMs, and material specifications. * Quality Control: Support quality initiatives by actively participating in engineering and quality discussions and recommending improvements to enhance production standards and outcomes. * Training and Development: Engage in ongoing training to strengthen engineering and product knowledge, attend monthly EHS sessions, and consistently follow workplace policies and procedures to support a safe, efficient, and compliant work environment. * Safety Compliance: Promote a safe and compliant work environment by following all safety guidelines-including proper PPE use-ensuring designs and processes meet safety and environmental standards and promptly reporting any hazards or incidents. * Cleanliness and Organization: Maintain a clean, organized workspace by consistently applying 5S principles-Sort, Set in Order, Shine, Standardize, and Sustain-to support efficiency and safety in daily operations. Requirements * Bachelor's Degree in Engineering * 1+ years' experience as a manufacturing / industrial engineer and experience with CAD Software * 1+ years of experience in lean manufacturing, VSM, Kaizen, 5s, etc. * 1+ years of experience implementing cost reduction and process improvement initiatives * 1+ years' experience launching new products into production and familiarity with fixture and test equipment designs and construction Core Competencies * Leadership & Collaboration; Demonstrates strong leadership and collaborative abilities, excels in teamwork, and communicates effectively across all levels to drive shared goals. * Efficiency & Productivity; Maintains a results-driven mindset focused on streamlining processes, enhancing operational efficiency, and maximizing productivity. * Analytical & Logical Thinking; Applies sharp analytical skills and logical reasoning to assess complex challenges and develop practical, data-informed solutions. * Project Management & Execution; Manages multiple priorities with confidence, drives projects from concept to completion, and takes ownership of outcomes with minimal oversight. * Communication & Problem Solving; Communicates clearly and proactively, identifies issues early, and implements innovative solutions to resolve problems and improve performance. Preferences * Bachelor degree in Mechanical, Manufacturing or Industrial Engineering * SolidWorks, and AutoCAD * Robotics experience Travel & Work Arrangements * Fully site based * Climate controlled manufacturing plant * Protective eyewear and footwear required What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************