Research and development engineer jobs in Bristol, PA

This position supports NSWCPD Code 431 Aircraft, Vehicle, Ship & Material Handling and Stowage, and Code 433 Launch, Recovery & Hydraulic Systems branches. The branches are responsible for in-service engineering for crane, davit, submarine hydraulic, surface ship steering, hydraulic systems as well as aircraft elevators, powered closures and doors, vertical package conveyors, anchors, mooring, towing, well deck, vehicle ramps, and stowage systems. The support is focused on launch, recovery and hydraulic systems as well as aircraft, vehicle, ship and material handling systems. Engineering tasks are concentrated in the areas of Ship Change Document (SCD), Maintenance and Testing, Research, Design, Testing, and Evaluation (RDT&E), Integrated Logistics support (ILS), and Installation support. Required Skills and/or Experience: Ten (10) years of professional experience supporting Naval HM&E systems Degree Requirements: Master's level degree in Mechanical Engineering. Must be a US Citizen A secret security clearance All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. ORBIS offers an excellent benefits package and a competitive salary in a professional atmosphere.

The Mechanical Engineer is responsible for defining and supporting the technical aspects of operations at the Naval Foundry and Propeller Center (NFPC). NFPC is a low volume, large size, sand-cast foundry that primarily pours non-ferrous alloys from induction furnaces. NFPC completes all machining operations in house and ships completed products to our internal Navy customers. Responsibilities include but are not limited to: Creates, revises/modifies Siemens NX programs for CNC machining of propulsor components. Provide Technical guidance for production operations (process flow, conveying drawing requirements into production process) by performing both independent assessments as well as team-oriented projects. This can include development of engineering reports, plans, drawings, specifications and procedures for the manufacture/repair of ship's propellers. Serve as Project engineer and as such be responsible for working with other engineering disciplines for all engineering aspects of an assigned project. Acts as troubleshooter in identification and resolution of problems encountered during production or pre-production activities. Shall comply with all NFPC procedures for safety, fall protection and hazardous materials. Shall assist in developing and implementing engineering process controls/techniques for continuous improvement of machining and assembly operations. Shall perform other tasks as required. Qualifications Required for the Position Bachelor of Science Degree in Engineering. Area of expertise should reside in Manufacturing, Mechanical or equivalent.

Headquartered in Bensalem PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company. EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Slate & Copper Roofing, Louvers, Glass & Glazing and Waterproofing. EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards. Job Summary EDA is seeking a competent Technical-Focused Project Manager (known Internally as an EDA Project Engineer) who specializes in either Low Slope Roofing or Exterior Facade scopes. The Project Engineer will interface with internal project teams to assist with their particular needs by serving as the dedicated team member tasked with researching and providing all required technical support to our PM teams by gaining profound knowledge of our projects, assisting with product selection, creating submittals, overseeing 3rd party shop drawings and engineering calculations, along with providing material take-offs and material order lists with professional oversight and solutions to challenges with design and field conditions. A Project Engineer will work with various departments from project management to shop fabrication and field operations, in order to ensure balance across various aspects of the project from constructability, sequencing and coordination to fabrication and install. Additionally, a Project Engineer will strive to improve by continuing to learn and research advanced technology regarding best practices in the field leading to cost-effective solutions. A Project Engineer is generally located within the company and works alongside other professionals to meet customer's needs. They usually begin as Project Managers or Assistant Project Managers, and as they advance on their career path within the company will become transitioned to the role of Project Engineer through training and/or previous experience and technical knowledge of our scopes of work. Individuals with a firm holistic understanding of both the operational and scope aspects of projects tend to excel in this position. You'll be a member of our brilliant engineering team, contributing to the design and construction of new cutting-edge architecture. To be successful in this position, you should have hands-on experience with project management, advanced technical knowledge of building envelopes, strong attention to detail and an in-depth understanding of construction details, sequencing and coordination. It's also important that you have rock-solid self-management and communication skills to meet the daily demands of this role. Job Responsibilities Obtain expert knowledge of a project by researching and studying contract documents Develop and manage relationships with manufacturers and vendors Research products for performance requirements and code compliance Assist with product selection by procuring pricing and product data for all potential products Create all submittal packages required for our scopes of work Facilitate all shop drawings and engineering calculations Assist in reviewing and analyzing shop drawing details for constructability and best practices Provide value engineering alternatives and innovative solutions to enhance project needs Perform material take-offs and provide material order lists Oversee and facilitate off-site mockups and testing Provide technical support and problem solving for field conditions Serve as the technical expert in project meetings with our customers Collaborate with shop, CAD operators, other engineers and field staff Attend conferences and lunch and learns to continue education Knowledge, Skills, and Abilities: Capable of critical thinking, risk assessment, problem solving & predictability Skilled in conflict resolution and negotiation Fluent in communicating ideas & concepts including visual diagrams Apply discernment and exercise proper ethical principles in all decisions Capable to attend meetings and effectively communicate with project team and customers Great computational and spatial ability Excellent oral and written communication Attention to detail Develop and maintain positive working relationships with internal and external customers and vendors Project development and leadership skills are essential Ability to work with various departments to facilitate the orderly execution of a proposed project plan Understanding of safety standards and environmental impact of a design Proficient in Microsoft Excel, OnScreen Take-Off, Bluebeam Requirements: Bachelor's degree in related engineering field preferred Previous experience as a Project Manager or a similar role Knowledge and Experience working with Low Slope Roofing and/or Exterior Facades EDA Contractors is an equal opportunity, affirmative action employer dedicated to diversity and the strength it brings to the workplace. All qualified applicants will receive consideration for employment regardless of race, color, age, religion, sex, national origin, protected veteran status, sexual orientation, gender identity, genetic information, disability status, or any other protected characteristic.

Project Engineer - Life Science & Cleanroom Construction 📍 Philadelphia, PA Metric is proud to be representing one of the largest cleanroom and life science construction firms in the United States, supporting the search for a driven Project Engineer to join their expanding team at their Philadelphia headquarters. Our client is a nationally recognized leader in pharmaceutical, biotech, and advanced manufacturing construction, known for delivering technically complex, highly controlled environments. They're growing rapidly and investing heavily in developing their next generation of project leaders. About the Role As a Project Engineer, you'll play a key role supporting major cleanroom and life science builds across the U.S. You'll work closely with Project Managers and Superintendents to ensure seamless project execution - from design coordination and procurement to quality control and documentation. This is a fantastic opportunity for someone early in their career (1-3 years of experience) who's eager to grow within a best-in-class construction organization known for innovation, precision, and career progression. Key Responsibilities Support the planning and execution of cleanroom, lab, and life science construction projects. Assist in submittals, RFIs, change orders, and procurement tracking. Coordinate with design teams, subcontractors, and field staff to maintain project schedules. Perform site visits and ensure documentation meets GMP and cleanroom standards. Utilize tools such as Procore, Bluebeam, and MS Project to manage daily project documentation. Participate in quality, safety, and commissioning activities as needed. Qualifications 1-3 years of experience as a Project Engineer or Assistant PM in commercial, industrial, or life science construction. Bachelor's degree in Construction Management, Engineering, or related field. Strong organizational, communication, and problem-solving skills. Exposure to GMP, pharmaceutical, or cleanroom construction is a plus, but not required. Proficiency in Procore, Bluebeam, or similar construction management platforms preferred. Why Apply Join a nationally recognized leader in cleanroom and life science construction. Gain hands-on experience on cutting-edge pharmaceutical and biotech projects. Work directly with some of the most experienced leaders in controlled-environment construction. Competitive base salary, benefits, and clear long-term growth opportunities. If you're a motivated Project Engineer looking to grow your career with a market leader at the forefront of innovation in life science construction - we'd love to hear from you.

Under supervision this person will inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, systems, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. Participate in on-the-job training programs regarding technical, administrative, and customer service requirements. The ISE II for this role will possess: -Experience in a hospital or healthcare setting -Have 5+ years of imaging experience -Ability to make decisions regarding troubleshooting and repairing medical imaging devices -Excellent communication, customer service and time management skills -Cathlab, CArms, and Ultrasound service experience (Strongly Preferred)

APPLICATION INSTRUCTIONS: CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. If you are NOT a current employee or student, please click “Apply” and complete the application process for external applicants. JOB DESCRIPTION AND POSITION REQUIREMENTS: We are seeking a Research and Development Engineer to join our Strategic Navigation team of The Applied Research Laboratory (ARL) at Penn State and located in our Navigation Research and Development Division (NRDD) in Warminster, PA. The NRDD is focused on developing the most advanced navigation technologies in the world, built around unique laboratories specially designed to test the most precise navigation sensors and systems. The mission of the NRDD is to conduct new navigation technology research and development, systems engineering, and provide expert knowledge for our Navy, Army, and other U.S. government sponsors. As part of our team, you will research, develop, analyze, implement, and test new capabilities for current and future high accuracy navigation systems. ARL is an authorized DoD SkillBridge partner and welcomes all transitioning military members to apply. You will: Design algorithms for navigation systems for ground, air, sea, and undersea environment Perform navigation modeling and simulation (M&S) to support trade studies Analyze multi-sensor data to evaluate system performance Interact and collaborate regularly with a team of fellow engineers and scientists, program management, program sponsors and stakeholders Prepare research papers and make presentations related to work performed Document work through reports and presentations This job will be filled at multiple levels depending upon the successful candidate's education and experience. Minimally requires a Bachelor's degree in an engineering or science discipline. Additional experience and/or education are required for higher-level jobs. A degree in Electrical Engineering, Mechanical Engineering, Aeronautical Engineering, Aerospace Engineering, Applied Mathematics, Physics, Computer Science, or Computer Engineering is preferred. Additional responsibilities of higher level position in include: Investigate and evaluate applicability of theories and practices to the development of navigation systems Algorithmic development Independently lead specific tasks within project scope Required skills/knowledge include: Strong written, oral, and interpersonal communication skills Experience using MATLAB and other programming languages for design, modelling and simulation Preferred skills/experience include: Navigation Theory State Space Estimation and Control Theory Stochastic Processes Theory Data Fusion Filter Design Geophysical and earth sciences ARL at Penn State is an integral part of one of the leading research universities in the nation and serves as a University center of excellence in defense science, systems, and technologies with a focus in naval missions and related areas. You will be subject to a government security investigation, and you must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. FOR FURTHER INFORMATION on ARL, visit our web site at **************** **The proposed salary range may be impacted by geographic differential.** The salary range for this position, including all possible grades is: $76,700.00 - $129,500.00 Salary Structure - additional information on Penn State's job and salary structure. CAMPUS SECURITY CRIME STATISTICS: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. Employment with the University will require successful completion of background check(s) in accordance with University policies. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines Warminster, PA

R&D Engineer Department/Location: R&D/Pennsylvania Carson Helicopters is currently seeking talented individuals for a position on its R&D/Engineering team. You will work on designing, ground testing and flight-testing critical aerospace components for legacy aircraft. Responsibilities: Coordinate with other test engineers to design and implement instrumentation supporting ground test & flight test activities. Write test plans & reports in accordance with FAA guidelines to support certification efforts. Support flight test activities as necessary up to and including on-aircraft data collection Lead the analytical design of structural aerospace parts Complete CAD and create drawing packages to enable construction of structural aerospace parts Select and provide detailed specifications for the purchase of raw material/parts; interact with vendors to resolve technical issues Assist technicians in resolving technical questions in the manufacturing of composite and metal structures and assemblies. Develop and execute procedures for activities such as material qualification and equipment calibration Manage and track multiple priorities while maintaining a focus towards common project goals Seek out the solutions to technical problems with the local team along with the larger Carson Helicopters workforce. Use your well-rounded technical knowledge to display proficiency in basic structural sizing, mechanisms, and design while making development decisions based on cost and schedule considerations Develop and refine manufacturing assembly procedures Background Bachelor's degree in mechanical engineering, physics, aerospace engineering, or other engineering discipline 4+ years of experience with complex, multi-disciplinary structural projects, rotary wing experience preferred. Preferred Skills: Experience using and troubleshooting aircraft flight test instrumentation Experience in writing FAA approved test plans and test reports as well as interpreting and analyzing test results Ability to rapidly change roles and responsibilities while working in a high-paced, challenging work environment Experience working on complex instrumentation design projects Experience with production tooling or product design in either prototype or volume environments Strong working knowledge of composite structures analysis Solidworks or equivalent experience Able to work well in an integrated collaborative team environment including daily interactions with technicians, engineers, and managers Self-motivated and directed with keen attention to detail Ability to communicate clearly and accurately with a wide range of people Problem solving and critical thinking skills A positive, upbeat attitude Responsibilities and tasks outlined in this are not exclusive and may change as determined by the needs of the company. Carson Helicopters, Inc. is a veteran-owned company and is proud to be an Equal Opportunity employer committed to hiring veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or disability. This job description is not an offer of employment or employment contract.

Work Mode: Onsite Opportunity Step into the world of Kallista and help shape the next generation of luxury products where precision meets creativity. As part of our New Product Development group, you'll get hands-on experience bringing real products to life, from early design sketches to prototype testing and final validation. You won't just watch from the sidelines. You'll model, build, test, and problem-solve alongside engineers who turn bold ideas into high-performance designs. Every day offers a new challenge whether it's refining a complex mechanism, improving manufacturing efficiency, or testing materials that redefine what "luxury" feels like. At Kallista, we believe great engineering is equal parts curiosity, collaboration, and craftsmanship. If you love working on products people interact with every day, enjoy digging into technical details, and thrive in a fast-moving, design-driven environment, this is your opportunity to build something extraordinary and have fun doing it. How You'll Contribute Showcase Your Engineering Curiosity: Apply engineering fundamentals and structured problem-solving to bring new product ideas to life. Support the development and validation of components, subsystems, and full assemblies that define innovation in luxury design. Participate in technical feasibility studies and learn how data-driven decisions shape product excellence. Collaborate Across Disciplines: Work side-by-side with experts in Engineering, Marketing, Quality, Manufacturing, and Industrial Design. Be part of the conversations that shape tough decisions, explore trade-offs, and find creative paths forward. Help transform concepts into manufacturable products that meet the highest standards of performance and design. Engage with a Global Team: Collaborate with engineers across Kohler's worldwide Technical Centers and Centers of Excellence to share insights, support testing, and promote best practices in design efficiency and component reuse. Gain exposure to how global collaboration drives innovation and accelerates development. Drive Continuous Improvement: Contribute ideas that improve product performance, sustainability, and process efficiency. Participate in design reviews and testing activities that push the boundaries of what's possible. Capture your learnings to strengthen team knowledge and leave a lasting impact on future products. SPECIFIC RESPONSIBILITIES Contribute to real product innovation: Support the design and development of new luxury products from early concept through testing and validation, working alongside engineers who bring ideas to market. Develop and document specifications: Help translate customer insights, regulatory needs, and technical requirements into clear product documentation under the guidance of senior engineers. Apply and grow engineering skills: Use CAD tools to create 3D models, engineering drawings, and prototypes that support design reviews and performance testing. Be part of the problem-solving process: Participate in product testing, data analysis, and root-cause investigations to enhance design performance and manufacturing efficiency. Collaborate across disciplines: Work closely with design, sourcing, and manufacturing teams to understand how products move from idea to production. Share what you learn: Capture insights, lessons, and design improvements to strengthen team knowledge and continuous improvement efforts. Skills/Requirements * Currently pursuing a Bachelor's degree in Mechanical Engineering (or related field) from an ABET-accredited university. * Foundational experience with 3D modeling and design tools (e.g., Creo, SolidWorks, or similar). * Demonstrated ability to test, analyze, and solve technical problems independently, with guidance from senior engineers as needed. * Strong communication, organization, and attention to detail skills with a collaborative mindset. * Must be legally authorized to work in the United States on an on-going bases without company sponsorship Applicants must be authorized to work in the US without requiring sponsorship now or in the future. Why Choose Kohler? We empower each associate to #BecomeMoreAtKohler with a competitive total rewards package to support your health and wellbeing, access to career growth and development opportunities, a diverse and inclusive workplace, and a strong culture of innovation. With more than 30,000 bold leaders across the globe, we're driving meaningful change in our mission to help people live gracious, healthy, and sustainable lives. About Us It is Kohler's policy to recruit, hire, and promote qualified applicants without regard to race, creed, religion, age, sex, sexual orientation, gender identity or expression, marital status, national origin, disability or status as a protected veteran. If, as an individual with a disability, you need reasonable accommodation during the recruitment process, please contact *********************. Kohler Co. is an equal opportunity/affirmative action employer.

Join ENERCON as a Part-Time Principal Mechanical Engineer. We are seeking accomplished Mechanical Engineers at the Principal level to bring their expertise to high-impact projects. This flexible, part-time role (averaging 30 hours or less per week) allows seasoned professionals to continue shaping innovative solutions while maintaining work-life balance. If you are looking to share your years of knowledge, we encourage you to explore our exciting opportunity and become part of our innovative and impactful team. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Responsibilities A typical day may include being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Other days you may be leading simple design projects such as valve replacements or writing engineering reports (such as corrosion studies or pros and cons of different equipment). You will also: Deliver High-Quality Engineering Documents: Prepare accurate and error-free drawings, sketches, calculations, and analyses that meet industry codes, standards, and regulations, ensuring client needs are met with precision Adhere to Standards: Develop engineering documents in alignment with client, ENERCON, and regulatory requirements while following established procedures, processes, and project directives Stay Ahead of the Curve: Keep your knowledge sharp and current with industry codes, standards, safety culture principles, and advanced design techniques tailored to the nuclear sector Commit to Excellence: Produce engineering deliverables that meet stringent quality assurance standards, aligning with project scopes and exceeding client expectations Build Lasting Client Relationships: Establish trust and rapport with clients through clear communication, professional interactions, and the delivery of exceptional engineering solutions Collaborate Across Disciplines: Work closely with other teams to ensure designs are comprehensive, integrated, and consider the needs of all disciplines involved #LI-AS1 Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work #LI-MB1 Qualifications Bachelor's Degree in Mechanical Engineering from an accredited university or equivalent 10 years of prior experience in nuclear or power generation design of mechanical systems Experience in one of the following industries required: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects Nuclear Engineering Change qualifications from any site that can be transferred are preferred 10CFR50.59 Screen and / or Evaluation qualifications that can be transferred are preferred Thermal-hydraulic and design modification experienced desired Demonstrated proficiency in preparation of mechanical calculations Proficient in Word and Excel Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Candidates who have mentorship experience or a desire to mentor early to mid career engineers preferred Must be able to get badged at a nuclear facility Must be able to perform plant walkdowns Pay Range USD $90,000.00 - USD $177,450.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

Mechanical Product Development Engineer - Document & Mail Automation OPEX Corporation is currently looking for a full time Mechanical Product Development Engineer to work at our World Headquarters in Moorestown, NJ. This position reports to the Product Development Mechanical Engineering Manager and is focused on the development of automation equipment and processes in the fields of mail processing and document imaging. Please review the videos and product literature on our opex.com website to learn more about our company, the industries we serve and the solutions we develop. Responsibilities The Mechanical Product Development Engineer will play a key role in conceiving of, developing and productizing industry-leading, highly integrated, software controlled electro-mechanical solutions that drive process efficiency and transactional integrity for our customers. This role will: Ultimately lead the delivery of complex production-level designs for new products and support those new products through production start and initial field adoption Collaborate with all engineering disciplines as well as management, manufacturing and service representatives Architect new products and product improvements Participate in project schedule creation Participate in brainstorms of best ideas and solutions Lead analytical and empirical design-guidance data mining efforts Lead design efforts within and beyond CAD Strive to deliver solutions that meet functional, cost and schedule requirements Provide guidance to mechanical designers and technicians Lead and participate in concept and design reviews Develop necessary breadboards and prototypes Lead design-confirmation testing Lead reliability testing Provide timely and accurate project updates to management Work closely with in-house manufacturing and assembly teams and outside vendors Close projects in a strong manner by ensuring timely delivery of manufacturing documentation, cost data and necessary safety certificates Take ownership of tasks from start to finish Requirements BS or MS in Mechanical Engineering 5+ years of hands-on electro-mechanical product/machine/equipment design engineering experience Experience bringing creative and innovative mechanical solutions to and through Production 3+ years of Solid Modeling experience (Inventor, Creo/ProEngineer, Solidworks, etc.) Injection molded plastic part design experience would be a plus Excellent written and verbal communication skills Demonstrated engineering creativity, organizational skill and ability to multi-task Hands-on design guidance and design confirmation testing and data acquisition experience Mechanical analytical experience (FEA, DOE, Test Plans, Engineering statistical analysis, tolerance analysis, etc.) Strong understanding of manufacturing processes and how to design to best leverage them Strong team player and comfortable leading small groups of engineers and designers Demonstrated ability to own an assignment and see it through to completion Skilled in the areas of schedule and cost estimation and adherence Comfortable working on cross-functional teams of mechanical, electrical, software and safety engineers and able to collaborate effectively and efficiently Engineering project management experience would be a plus Experience with designing electro-mechanical products for high volumes (10k+ per year) would be a plus A keen design eye and experience reviewing others' design work would be a plus Design engineering experience in the printing, scanning, copying industries would be a plus Ability to travel when necessary (typically less than 2 weeks per year) Physical/Work Environments Employee will primarily be working in an office environment with occasional travel to customer sites (4 days in the office per week) Sitting for an extended period of time Some walking between facilities Employee will frequently lift up to 10 lbs and occasionally lift up to 25 lbs

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description This position is for an Electrical Engineer with 8+ years of experience in a similar role. The chosen Candidate MUST have experience with medical quality systems and procedures so previous experience in the Medical Device industry is expected. Candidates MUST have strong working knowledge of design for low power and low noise applications. Experience in board layout for mixed signal/low noise applications. Candidates without this previous experience will not be considered. Familiarity with system grounding/shielding and EMI mitigation design techniques. Experience in board layout for high density, high speed/performance digital interfaces (PADS preferred). Experience in schematic entry (OrCAD preferred). Familiarity with EMC and Safety testing. Good laboratory measurement skills (analog and digital). Knowledge of MS Office documentation, spreadsheet, and presentation tools. Established industry circuit design experience Qualifications Candidates best suited for this position will typically have obtained a Bachelor's degree and 8+ years of experience in a related field or a suitable combination of experience and education relative to the position. Additional Information All your information will be kept confidential according to EEO guidelines.

Is Kymanox the right fit for you? You want to make a difference and have an impact… You enjoy having an influence in your day-to-day work… You are motivated by working alongside a team filled with subject matter experts that will help you learn and grow… You wake up every day and do what you do … because patients deserve better. If this sounds like you, you've come to the right place. The Kymanox Product Development & Commercialization team is seeking an experienced (Contract) Principal Product Development Engineer or Scientist with a strong technical and/or operations backgrounds in the pharmaceutical (combination product), biotechnology or medical device industries. Job Description: Leverages expertise in technical leadership and cross-functional management to advance, de-risk, and deliver successful outcomes for clients' medical device and combination product development programs. Basic responsibilities include: Representing Kymanox to clients as a subject matter expert and thought leader. Providing technical leadership and direction to internal and external project teams. Maintaining conformance to internal and client quality management systems. Adhering to regulatory standards and promoting a positive compliance culture. Providing mentorship to junior staff. Projects may include any of the following technical areas: Evaluate client technical documentation and strategy to provide clear, actionable recommendations for product design, development, and commercialization activities. Conduct competitive landscape assessments and market analyses for delivery devices, contract organizations, and novel technologies Prepare detailed project plans, schedules, and overall development strategy. Management of technically complex, multi-year development programs Oversee the creation of technical documentation supporting design controls, manufacturing processes, and regulatory submissions. Lead the preparation of risk management file documentation Oversee phase-appropriate client testing activities, including combination product and medical device design verification and human factors testing. Direct design verification and the associated test method development and validation activities Expert-level statistical analysis of development and production data, strong preference for experience in reliability Contract Manufacturing Organization (CMO) evaluation, due diligence, and selection on behalf of clients. Support process development, improvement, and troubleshooting, Engage with external partners to facilitate tech transfer Provide technical support for regulatory submission preparation and review Serve as an independent reviewer for client design review meetings throughout the product development process Aptitude and Skill Set: Versatile and adaptable technical skill set Executes high-profile activities with minimal supervision Skilled in strategic planning and translating strategy into actionable processes Operates effectively within multiple client quality systems and product development frameworks concurrently Highly detail-orientated and organized Strong professional presence with excellent presentation skills Confident in providing feedback and influencing internal and external stakeholders Collaborates effectively with remote team members and direct reports Self-motivated and inspires others to achieve goals Proactively identifies and resolves issues before they escalate Demonstrates both managerial (i.e., “do things right”) and leadership (i.e., “do the right thing”) skills Excellent verbal and written communication skills in English Innovative and creative mindset with a focus on continuous improvement Seasoned soft skills - high emotional intelligence (EQ) and strong team player Technologically savvy, comfortable with modern IT tools and productivity software Thrives in fast-paced, dynamic, and growth-oriented environments Experienced engaging subject matter experts and effectively leveraging their input Understands and values quality and regulatory compliance Uncompromising honesty and integrity Educational Background: Advanced degree in natural sciences (Chemistry, Biology, or similar) or engineering (Chemical, Biomedical, or Mechanical Engineering), or related technical discipline from an accredited institution. Industry certificates in project management (e.g., PMP, CAPM), six-sigma, quality, or regulatory affairs preferred but not required. Experience: Minimum 15 years' experience in product development and/or manufacturing in the pharmaceutical (combination product), biotechnology, diagnostic, and/or medical device sectors is required. Leadership of complex, multi-disciplinary development programs, pharmaceutical (combination product) development, in vitro diagnostic development, clinical development, or electromechanical systems development is desirable. Experience working at startup companies or small biotech/pharma/med device companies and familiarity with government and private sector funding mechanisms is highly favorable. Experience working in professional services is favorable. Management of direct reports is not in scope of this role at the time of hire. However, organizational growth may allow for the role to expand to managerial responsibility of 1-5 direct reports. Successful candidates for this position will be experienced in leading and mentoring junior staff. Region: Kymanox Corporate HQ in Morrisville, NC or King of Prussia, PA preferred. Travel: Travel may be necessary to support client work. If the candidate is not local to Kymanox headquarters in RTP, North Carolina, periodic visits (e.g.: 2 to 4 visits per year) are required. Compensation: Pay rate is commensurate with experience, qualifications, and other intangibles evident during the interview process - as well as market conditions. About Kymanox:Join Kymanox - a life sciences professional services company dedicated to life sciences who has successfully delivered over 4000 projects across 20+ countries. Become a member of a dynamic, fulfilling team that helps a broad range of life science products get to market more quickly, more affordably, and with the highest quality and safety standards possible in today's biotechnology, pharmaceutical, medical device, and combination product industries. With a reputation of providing unparalleled professional services and our highly collaborative team of engineering, compliance, and project management experts, Kymanox provides an outstanding opportunity for learning and career advancement. Kymanox encourages team members, especially new graduates, and young professionals, to work on a variety of projects to gain increased learnings in Kymanox's service offerings and the life science industry as a whole. Kymanox is looking for motivated individuals who want to solve problems in the life science industries while doing the work they love and helping get modern medicines that enhance and save patient lives to market. Kymanox provides professional services related to engineering, compliance, and project management. We service clients ranging from Fortune 100 companies to virtual start-up companies. The company was founded in 2004 and has been growing steadily since its inception. Our corporate HQ is based in Research Triangle Park, NC, and we have offices in Boston, Chicago, Philadelphia, and New Jersey. To learn more about our company, please visit our website: Life Science Solutions | Kymanox Kymanox is an equal-opportunity employer and works diligently to protect the rights of job seekers by following all local, state, and federal laws as well as best Human Resource (HR) practices in the Life Science industry.

RBC Bearings is a well-known international manufacturer and marketer of highly engineered precision plain, roller and ball bearings. We have been providing bearing solutions to our customers since 1919. Over the past ten years, under the leadership of our current management team, RBC Bearings has significantly broadened our end markets, products, customer base and geographic reach. We currently have 31 facilities, of which 28 are manufacturing facilities in five countries. Our selling efforts are supported by a global network of sales engineers, distributors and authorized agents. JOB TITLE/LOCATION: Manufacturing Engineer - West Trenton, NJ Normal Working Hours: 7 am to 4 pm DESCRIPTION: The Manufacturing Engineer develops, evaluates, and improves industrial manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Roles and Responsibilities: Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Communicates manufacturing capabilities, production schedules, or other information to facilitate production processes. Confers with vendors in order to determine specifications of products and arrange equipment, material purchase, and parts. Evaluates products based on specifications and quality standards. Performs work under minimal supervision. Handles complex issues and problems, and refers only the most complex issues to higher‐level staff. Provides leadership, coaching, and/or mentoring to a subordinate group. May act as a "lead" or first‐level supervisor. Other duties as assigned. Required Education, Skills and Experience: Bachelor's degree, and 4‐6 years of experience. Possesses comprehensive knowledge of subject matter. Oral and written communication skills. Ability to meet deadlines. Ability to work independently as well as part of a team. Problem‐solving skills. Analytical thinking skills. Design expertise. Leadership skills. Preferred Education, Skills and Experience: Experience/working knowledge of manufacturing processes Intermediate materials, metal and heat treating knowledge Working knowledge of press operation, grinding, and lathe equipment We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Primary Duties & Responsibilities Product development - 70% Responsible for optical modeling, optical design and design review, ODVT. Contribute optical responses in RFI/RFQ. Develop new optical module or subsystem specifications and verification requirements. Work with NPI team to transfer design to manufacture. Legacy Sustaining - 10% Take ownership technical approval on component PCNs. Take technical ownership on optical component introduction for cost reduction. Support and complete technical issues, RMA from manufacture of legacy products. Technical Development - 20% Investigate new micro-optical integrated modules or EDFA related optical technologies. Support feasibility studies by applying new techniques or technologies to existing and future products. Investigate technologies that improve product density via reduced power consumption and physical size Education & Experience BSc/MSc in Optics, Electro-optics, Physics or Electrical Engineering with strong optics and fiber optic background required. More than 5 years of experience in optical simulation and design in integrated sub-system including Terminal card, In-Line card, ROADM card. More than 10 years of experience in optical simulation and design in optical functional modules including EDFA/OCM/OTDR. More than 10 years of experience with key optical components used in transport systems including WSS/OSC, etc. More than 8 years of experience with product development processes and new product transfer to manufacturing Skills Experience with optical free-space simulation tools such as Zemax. Experience in test script development for ODVT testing like Python, etc. Good communication skills and team work capability. Proficient in written and oral English. Quick learning and strong adoption in new team. Demonstrated ability to solve complex issues. Working Conditions May require occasional off-site meetings or travel Regular use of a computer and other office equipment is necessary Interaction with team members and external contacts is a regular part of the job May require occasional overtime and flexibility in work hours to accommodate the executive's needs Physical Requirements Sitting for extended periods while working on a computer or conducting meetings. Use of hands and fingers for typing, writing, and handling documents. Occasional lifting of objects or materials up to 20 pounds for administrative tasks. Ability to communicate verbally and in writing. Mobility within the office environment to attend meetings or interact with colleagues. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a talented Bioprocess Engineer to join our team based out of any of our offices in the U.S. (MA, NJ, MD, PA, NC, KS, or CA). In this role, you will be responsible for designing and implementing manufacturing processes and supporting utilities on a scale that can range from developmental pilot plants to full commercial production. Additional Responsibilities * Coordinate with project managers to determine project scope, complexity, and schedule for the project. * Develop project execution plans (budget, milestones, deliverables, and staffing plans) to deliver the project on time, on budget, and of the highest quality. * Assist clients in strategic evaluations to develop concepts supported by engineering studies for expanding, improving, or automating existing facilities. * Write the scope of work for process, utilities, and manufacturing controls based on preliminary reviews with the client. * Complete design deliverables for single unit operations through the entire facility flow, including Process Flow Diagrams (PFD), Material and Energy Balances, utility requirements, and Process P&IDs that include controls strategy and CIP/SIP functions, if appropriate. * Ensure completion of quality specifications and performance data sheets for process equipment and instrumentation. * Make use of and participate in the development of company design tools, including process simulation and smart P&IDs (AutoCAD, Plant 3D, SuperPro, etc.). * Establish and maintain excellent working relationships with clients and members of the IPS design. * For applicants located in Northern California, the salary offered for this role is between $117,000 and $157,000, but the actual salary offered is dependent on experience, skill set, and education. * For applicants located in Southern California, the salary offered for this role is between $112,000 and $150,000, but the actual salary offered is dependent on experience, skill set, and education. * For applicants located in the state of New Jersey, the salary offered for this role is between $107,000 and $143,000, but the actual salary offered is dependent on experience, skill set, and education. Qualifications & Requirements * Substantial process design and operations experience in pharmaceutical facilities, which should include Biologic, Vaccine, and/or ATMP products. * Degree in natural sciences and/or engineering discipline (Biotechnology, Biology, Biochemistry, Process, Mechanical Engineering or related field). * Knowledge of system design, applicable codes, and cGMPs as they affect process design and equipment specification. * Knowledgeable in process simulation and creating P&IDs (AutoCAD, Plant 3D, SuperPro, etc.). * Possesses a demonstrated ability for analytical thinking, and an aptitude for structure. All interviews are conducted either in person or virtually, with video required. #LI-JP1 About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That's only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race, creed, color, religion, national origin, sex, age, disability, sexual orientation, gender identity or expression, genetic predisposition or carrier status, veteran, marital, or citizenship status, or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. #LI-JP1 Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here! * Substantial process design and operations experience in pharmaceutical facilities, which should include Biologic, Vaccine, and/or ATMP products. * Degree in natural sciences and/or engineering discipline (Biotechnology, Biology, Biochemistry, Process, Mechanical Engineering or related field). * Knowledge of system design, applicable codes, and cGMPs as they affect process design and equipment specification. * Knowledgeable in process simulation and creating P&IDs (AutoCAD, Plant 3D, SuperPro, etc.). * Possesses a demonstrated ability for analytical thinking, and an aptitude for structure. All interviews are conducted either in person or virtually, with video required. #LI-JP1 At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a talented Bioprocess Engineer to join our team based out of any of our offices in the U.S. (MA, NJ, MD, PA, NC, KS, or CA). In this role, you will be responsible for designing and implementing manufacturing processes and supporting utilities on a scale that can range from developmental pilot plants to full commercial production. Additional Responsibilities * Coordinate with project managers to determine project scope, complexity, and schedule for the project. * Develop project execution plans (budget, milestones, deliverables, and staffing plans) to deliver the project on time, on budget, and of the highest quality. * Assist clients in strategic evaluations to develop concepts supported by engineering studies for expanding, improving, or automating existing facilities. * Write the scope of work for process, utilities, and manufacturing controls based on preliminary reviews with the client. * Complete design deliverables for single unit operations through the entire facility flow, including Process Flow Diagrams (PFD), Material and Energy Balances, utility requirements, and Process P&IDs that include controls strategy and CIP/SIP functions, if appropriate. * Ensure completion of quality specifications and performance data sheets for process equipment and instrumentation. * Make use of and participate in the development of company design tools, including process simulation and smart P&IDs (AutoCAD, Plant 3D, SuperPro, etc.). * Establish and maintain excellent working relationships with clients and members of the IPS design. * For applicants located in Northern California, the salary offered for this role is between $117,000 and $157,000, but the actual salary offered is dependent on experience, skill set, and education. * For applicants located in Southern California, the salary offered for this role is between $112,000 and $150,000, but the actual salary offered is dependent on experience, skill set, and education. * For applicants located in the state of New Jersey, the salary offered for this role is between $107,000 and $143,000, but the actual salary offered is dependent on experience, skill set, and education.

Business Introduction: We manufacture and supply reliable, high-quality medicines and vaccines to meet patients' needs and drive our performance. Our network of 37 medicines and vaccines manufacturing sites delivered 1.7 billion packs of medicines and 409 million vaccine doses in 2024 to help make a positive impact on the health of millions of people. Our supply chain is not just core to our operations; it's vital to bringing our innovations to patients as quickly, efficiently and effectively as possible. Technology is transforming how we manufacture medicines and vaccines, enabling us to increase the speed, quality and scale of product supply. We need the very best minds and capability to help us on our journey to make more complex products, harnessing the power of smart manufacturing technologies including robotics, digital solutions and artificial intelligence to deliver for patients. Position Summary: The Manufacturing Science and Technology (MSAT) organization is a site-based team, providing technical support to ensure Upper Merion BioPharma site goals and objectives are achieved. The primary objective role of MSAT is to ensure manufacturing processes are capable, compliant and productive while ensuring product quality. The site MSAT team is also responsible for delivering continuous improvements to the existing supply chains supported by UM BioPharma and working with global MSAT to execute technology transfers and implement process-related improvement programs across the product lifecycle. The MSAT Associate Bioprocess Engineer will support the development and transfer of bioprocesses for manufacturing. You will work with scientists, engineers, operators and quality teams to move processes from development to production. You will ensure manufacturing processes are capable, compliant and productive while ensuring product quality. You will help diagnose and resolve process issues and support continuous improvement. We value hands-on problem solvers who communicate clearly, learn quickly, and care about patient impact. Join us to grow your technical skills, make meaningful contributions, and help GSK unite science, technology and talent to get ahead of disease together. Responsibilities: This role will provide YOU the opportunity to lead key activities to progress YOUR career. These responsibilities include some of the following: Support the introduction and scale-up of primary manufacturing processes (drug substance). Support the successful delivery of clinical and commercial biopharmaceutical manufacturing by providing technical subject matter expertise and technical oversight. Provide real-time and in-person process monitoring and technical oversight for a 24-7 manufacturing facility which will require off hours, and weekend support as needed. Design and execute technical studies and protocols to support technology transfer, manufacturing execution, and process improvements. Analyze data and compile summary reports to make recommendations based on technical study execution. Monitor process performance and trends, investigate deviations, and recommend corrective actions. Work with quality and operations to resolve technical or process-related issues. Help develop operator training materials and deliver training where needed. Contribute to continuous improvement projects to improve safety, quality, yield, or cost of goods. Why You? Basic Qualification: We are seeking professionals with the following required skills and qualifications to help us achieve our goals: Bachelor's degree in biological, biochemical, chemical engineering, or related technical discipline, or equivalent experience. Experience with current good manufacturing practices (GMPs) and basic regulatory concepts. Experience or coursework in cell culture, fermentation, or downstream separation techniques. Ability to work on site and flex to support off-shift or weekend activities when needed. Preferred Qualification: If you have the following characteristics, it would be a plus Master's degree in a relevant science or engineering field. Prior hands-on experience with technology transfer, process validation, or scale-up. Knowledge of analytical methods used to monitor bioprocesses. Experience using process data analysis and trend monitoring tools. Training or experience in Operational Excellence, Lean, or continuous improvement methods. Comfortable collaborating with cross-functional teams, including Quality, Engineering, and Operations. At least 6 months experience in a biopharmaceutical or pharmaceutical manufacturing environment, or internship/co-op experience in a relevant lab or manufacturing setting. Familiarity with current good manufacturing practices (GMPs) and basic regulatory concepts. Strong written and verbal communication skills for clear documentation and handovers. Work arrangement This role is on site at a GSK manufacturing location in the United States. Hybrid or remote working is not available for this position due to the hands-on nature of the role. What we offer you You will gain practical experience working with experienced engineers and operators. You will build transferable skills in bioprocess development, technology transfer, and manufacturing. You will have opportunities for mentoring, training, and career progression within a global company committed to inclusion and employee growth. Apply now to join a team where your work helps move science from lab to manufacturing, and where you can grow your skills while making a real difference. We encourage candidates from all backgrounds to apply. Please visit GSK US Benefits Summary to learn more about the comprehensive benefits program GSK offers US employees. Why GSK? Uniting science, technology and talent to get ahead of disease together. GSK is a global biopharma company with a purpose to unite science, technology and talent to get ahead of disease together. We aim to positively impact the health of 2.5 billion people by the end of the decade, as a successful, growing company where people can thrive. We get ahead of disease by preventing and treating it with innovation in specialty medicines and vaccines. We focus on four therapeutic areas: respiratory, immunology and inflammation; oncology; HIV; and infectious diseases - to impact health at scale. People and patients around the world count on the medicines and vaccines we make, so we're committed to creating an environment where our people can thrive and focus on what matters most. Our culture of being ambitious for patients, accountable for impact and doing the right thing is the foundation for how, together, we deliver for patients, shareholders and our people. If you require an accommodation or other assistance to apply for a job at GSK, please contact the GSK Service Centre at ************** (US Toll Free) or *************** (outside US). GSK is an Equal Opportunity Employer. This ensures that all qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), military service or any basis prohibited under federal, state or local law. Important notice to Employment businesses/ Agencies GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site. Please note that if you are a US Licensed Healthcare Professional or Healthcare Professional as defined by the laws of the state issuing your license, GSK may be required to capture and report expenses GSK incurs, on your behalf, in the event you are afforded an interview for employment. This capture of applicable transfers of value is necessary to ensure GSK's compliance to all federal and state US Transparency requirements. For more information, please visit the Centers for Medicare and Medicaid Services (CMS) website at *********************************

Manufacturing Engineer BH Job ID: 3404 SF Job Req ID: 16085 Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Location: Ivyland, PA (Onsite) About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview Being recognized as a leader in our industry is a testament to our unwavering commitment to delivering high-quality products and services. Within our Milton Roy division, we set the standard for excellence and understand the pivotal role manufacturing processes play in driving operational success. We believe progress isn't just a concept-it's the tangible improvements that begin with you. We're seeking a Manufacturing Engineer who thrives in a fast-paced, collaborative environment and is ready to make an impact from day one. In this role, you'll tackle real-world challenges on the production floor, design custom fixtures, support new product launches, and help shape the future of our manufacturing processes. You'll lead the execution and optimization of manufacturing systems across our production lines, suppliers, customers, and partners-analyzing methods, redesigning processes, and driving improvements in cost, efficiency, and quality, all while maintaining safety and compliance standards. Whether you're early in your career with a passion for hands-on problem solving or bring a few years of experience applying engineering principles in manufacturing, we value your creativity, initiative, and the drive to turn ideas into results. Responsibilities * Engineering: Plan, coordinate, and continuously improve manufacturing processes by leveraging knowledge of product design, materials, tooling, and production capabilities; analyze workflow and workforce utilization to optimize space and efficiency, while actively supporting production and resolving engineering issues with a proactive, hands-on approach. * Design and Analysis: Support new engineering development by contributing to design reviews, optimizing equipment and workspace layouts for efficiency, and collaborating with planning and design teams to ensure product and tooling designs enable effective and streamlined production methods. * Communication and Documentation: Collaborate cross-functionally with management, engineering, suppliers, and production teams to align manufacturing capabilities and schedules, resolve issues, communicate plans effectively, and support production through data analysis and reporting. * Process Improvement: Ensure manufacturing processes and procedures align with company standards by leading continuous improvement initiatives rooted in Lean Six Sigma, redesigning workflows to boost productivity, and maintaining a strong focus on quality, ergonomics, and safety across multiple light industrial production lines. * Cost Reduction: Manage production costs and schedules by evaluating labor, materials, and equipment needs, overseeing maintenance and repairs, and supporting cost reduction initiatives through effective communication with suppliers and resolution of technical issues related to drawings, BOMs, and material specifications. * Quality Control: Support quality initiatives by actively participating in engineering and quality discussions and recommending improvements to enhance production standards and outcomes. * Training and Development: Engage in ongoing training to strengthen engineering and product knowledge, attend monthly EHS sessions, and consistently follow workplace policies and procedures to support a safe, efficient, and compliant work environment. * Safety Compliance: Promote a safe and compliant work environment by following all safety guidelines-including proper PPE use-ensuring designs and processes meet safety and environmental standards and promptly reporting any hazards or incidents. * Cleanliness and Organization: Maintain a clean, organized workspace by consistently applying 5S principles-Sort, Set in Order, Shine, Standardize, and Sustain-to support efficiency and safety in daily operations. Requirements * Bachelor's Degree in Engineering * 1+ years' experience as a manufacturing / industrial engineer and experience with CAD Software * 1+ years of experience in lean manufacturing, VSM, Kaizen, 5s, etc. * 1+ years of experience implementing cost reduction and process improvement initiatives * 1+ years' experience launching new products into production and familiarity with fixture and test equipment designs and construction Core Competencies * Leadership & Collaboration; Demonstrates strong leadership and collaborative abilities, excels in teamwork, and communicates effectively across all levels to drive shared goals. * Efficiency & Productivity; Maintains a results-driven mindset focused on streamlining processes, enhancing operational efficiency, and maximizing productivity. * Analytical & Logical Thinking; Applies sharp analytical skills and logical reasoning to assess complex challenges and develop practical, data-informed solutions. * Project Management & Execution; Manages multiple priorities with confidence, drives projects from concept to completion, and takes ownership of outcomes with minimal oversight. * Communication & Problem Solving; Communicates clearly and proactively, identifies issues early, and implements innovative solutions to resolve problems and improve performance. Preferences * Bachelor degree in Mechanical, Manufacturing or Industrial Engineering * SolidWorks, and AutoCAD * Robotics experience Travel & Work Arrangements * Fully site based * Climate controlled manufacturing plant * Protective eyewear and footwear required What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

R&D Engineer Department/Location: R&D/Pennsylvania Carson Helicopters is currently seeking talented individuals for a position on its R&D/Engineering team. You will work on designing, ground testing and flight-testing critical aerospace components for legacy aircraft. Responsibilities: Coordinate with other test engineers to design and implement instrumentation supporting ground test & flight test activities. Write test plans & reports in accordance with FAA guidelines to support certification efforts. Support flight test activities as necessary up to and including on-aircraft data collection Lead the analytical design of structural aerospace parts Complete CAD and create drawing packages to enable construction of structural aerospace parts Select and provide detailed specifications for the purchase of raw material/parts; interact with vendors to resolve technical issues Assist technicians in resolving technical questions in the manufacturing of composite and metal structures and assemblies. Develop and execute procedures for activities such as material qualification and equipment calibration Manage and track multiple priorities while maintaining a focus towards common project goals Seek out the solutions to technical problems with the local team along with the larger Carson Helicopters workforce. Use your well-rounded technical knowledge to display proficiency in basic structural sizing, mechanisms, and design while making development decisions based on cost and schedule considerations Develop and refine manufacturing assembly procedures Background Bachelor's degree in mechanical engineering, physics, aerospace engineering, or other engineering discipline 4+ years of experience with complex, multi-disciplinary structural projects, rotary wing experience preferred. Preferred Skills: Experience using and troubleshooting aircraft flight test instrumentation Experience in writing FAA approved test plans and test reports as well as interpreting and analyzing test results Ability to rapidly change roles and responsibilities while working in a high-paced, challenging work environment Experience working on complex instrumentation design projects Experience with production tooling or product design in either prototype or volume environments Strong working knowledge of composite structures analysis Solidworks or equivalent experience Able to work well in an integrated collaborative team environment including daily interactions with technicians, engineers, and managers Self-motivated and directed with keen attention to detail Ability to communicate clearly and accurately with a wide range of people Problem solving and critical thinking skills A positive, upbeat attitude Responsibilities and tasks outlined in this are not exclusive and may change as determined by the needs of the company. Carson Helicopters, Inc. is a veteran-owned company and is proud to be an Equal Opportunity employer committed to hiring veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or disability. This job description is not an offer of employment or employment contract.

_Work Mode: Onsite_ **Opportunity** Step into the world of Kallista and help shape the next generation of luxury products where precision meets creativity. As part of our New Product Development group, you'll get hands-on experience bringing real products to life, from early design sketches to prototype testing and final validation. You won't just watch from the sidelines. You'll model, build, test, and problem-solve alongside engineers who turn bold ideas into high-performance designs. Every day offers a new challenge whether it's refining a complex mechanism, improving manufacturing efficiency, or testing materials that redefine what "luxury" feels like. At Kallista, we believe great engineering is equal parts curiosity, collaboration, and craftsmanship. If you love working on products people interact with every day, enjoy digging into technical details, and thrive in a fast-moving, design-driven environment, this is your opportunity to build something extraordinary and have fun doing it. **How You'll Contribute** **Showcase Your Engineering Curiosity** : Apply engineering fundamentals and structured problem-solving to bring new product ideas to life. Support the development and validation of components, subsystems, and full assemblies that define innovation in luxury design. Participate in technical feasibility studies and learn how data-driven decisions shape product excellence. **Collaborate Across Disciplines:** Work side-by-side with experts in Engineering, Marketing, Quality, Manufacturing, and Industrial Design. Be part of the conversations that shape tough decisions, explore trade-offs, and find creative paths forward. Help transform concepts into manufacturable products that meet the highest standards of performance and design. **Engage with a Global Team:** Collaborate with engineers across Kohler's worldwide Technical Centers and Centers of Excellence to share insights, support testing, and promote best practices in design efficiency and component reuse. Gain exposure to how global collaboration drives innovation and accelerates development. **Drive Continuous Improvement:** Contribute ideas that improve product performance, sustainability, and process efficiency. Participate in design reviews and testing activities that push the boundaries of what's possible. Capture your learnings to strengthen team knowledge and leave a lasting impact on future products. **SPECIFIC RESPONSIBILITIES** **Contribute to real product innovation:** Support the design and development of new luxury products from early concept through testing and validation, working alongside engineers who bring ideas to market. **Develop and document specifications:** Help translate customer insights, regulatory needs, and technical requirements into clear product documentation under the guidance of senior engineers. Apply and grow engineering skills: Use CAD tools to create 3D models, engineering drawings, and prototypes that support design reviews and performance testing. **Be part of the problem-solving process:** Participate in product testing, data analysis, and root-cause investigations to enhance design performance and manufacturing efficiency. Collaborate across disciplines: Work closely with design, sourcing, and manufacturing teams to understand how products move from idea to production. **Share what you learn:** Capture insights, lessons, and design improvements to strengthen team knowledge and continuous improvement efforts. **Skills/Requirements** + Currently pursuing a Bachelor's degree in Mechanical Engineering (or related field) from an ABET-accredited university. + Foundational experience with 3D modeling and design tools (e.g., Creo, SolidWorks, or similar). + Demonstrated ability to test, analyze, and solve technical problems independently, with guidance from senior engineers as needed. + Strong communication, organization, and attention to detail skills with a collaborative mindset. + Must be legally authorized to work in the United States on an on-going bases without company sponsorship **_Applicants must be authorized to work in the US without requiring sponsorship now or in the future._** **Why Choose Kohler?** We empower each associate to #BecomeMoreAtKohler with a competitive total rewards package to support your health and wellbeing, access to career growth and development opportunities, a diverse and inclusive workplace, and a strong culture of innovation. With more than 30,000 bold leaders across the globe, we're driving meaningful change in our mission to help people live gracious, healthy, and sustainable lives. **About Us** It is Kohler's policy to recruit, hire, and promote qualified applicants without regard to race, creed, religion, age, sex, sexual orientation, gender identity or expression, marital status, national origin, disability or status as a protected veteran. If, as an individual with a disability, you need reasonable accommodation during the recruitment process, please contact ********************* . Kohler Co. is an equal opportunity/affirmative action employer.