Research and development engineer jobs in Cincinnati, OH

Note: Looking for USC / GC We are seeking an experienced PCB Design Engineer to support the development, qualification, and test engineering of electromechanical medical device components. This role involves hands-on PCB design, board bring-up, supplier collaboration, design transfer, and manufacturing test readiness in a regulated environment. Key Responsibilities PCB Design & Hardware Development Design and develop PCBAs for electromechanical components including switch assemblies and cable assemblies. Perform schematic design, BOM creation, and updates for PCBAs. Support board bring-up, debugging, and board revisions. Conduct design reviews, DFMEA, DFM, and implement design improvements. Develop low-level embedded drivers for on-board peripherals and motor control. Supplier Collaboration & Qualification Work closely with suppliers to meet cost, quality, and performance targets. Lead and monitor component qualification activities with suppliers. Communicate design requirements and process capability expectations effectively. Act as a technical liaison between suppliers and internal design teams. Manufacturing & Process Engineering Apply Measurement System Analysis (MSA) and establish calibration requirements. Conduct Design of Experiments (DOE), process stability, control, and capability studies. Support process characterization, manufacturing readiness, and equipment development. Lead design transfer from development to manufacturing. Testing & Validation (Test Engineering Scope) Write and execute module-level test plans. Develop engineering studies for board-level and device-level testing. Create test specifications for ICT (In-Circuit Test) and FCT (Functional Circuit Test). Review and approve hardware and fixture designs for functional testers. Support ICT/FCT qualification and deployment at manufacturing plants. Troubleshoot test issues and resolve technical roadblocks during deployment. Required Skills & Qualifications Strong experience in PCB design and board bring-up. Hands-on knowledge of DFMEA, DFM, DOE, MSA, and process capability methods. Experience working with ICT/FCT test development and qualification. Familiarity with embedded systems and low-level driver development. Strong supplier management and cross-functional communication skills. Experience in regulated industries (medical devices preferred). Nice to Have Experience with motor control systems Prior exposure to Johnson & Johnson or medical device standards International supplier collaboration experience

Senior Azure Cloud Engineer - Location: Hybrid onsite 2-3 days per week in Cincinnati, OH 45245 (Eastgate mall Batavia) - 6 Month Contract to Hire - Must be Green Card or US Citizen - Pay: $80-$90 per hr W-2 Conversion Salary ($150k - $160K) CBTS is searching for a Senior Azure-focused Cloud Engineer to design, deploy, and maintain the cloud infrastructure that supports these systems. This role ensures reliability, performance, scalability, security, and operational continuity across multiple applications, environments, and services. You will be responsible for building the underlying platform that allows engineering teams to deliver features quickly and securely-while enabling the ecosystem to scale. Responsibilities: Cloud Infrastructure & Architecture Design and implement Azure-based infrastructure for: APIs (Azure App Service) MAUI + Blazor application backends Databases (Azure SQL) Blob storage for media and timing data Azure Functions (event-driven workloads) Identity & Access Management (Azure AD / Managed Identity) API Management (APIM) Build secure, resilient, highly available cloud environments for production, staging, and development. DevOps & CI/CD Maintain GitHub Actions or Azure DevOps pipelines for: Automated builds Automated deployments Database migrations Artifact and container management Support infrastructure-as-code (IaC) using: Bicep ARM Terraform (optional) Security & Compliance Implement cloud security best practices: Azure Key Vault for secret management Role-based Access Control (RBAC) Network Security Groups and firewalls Managed Identities for services Zero-trust access flows Manage API throttling, DDoS protection, and monitoring alerts. Observability & Monitoring Implement monitoring and alerting with: Azure Monitor Application Insights Log Analytics Create diagnostic dashboards for: API health Latency Errors Throughput Live event traffic (race-day spikes) Performance & Scalability Tune SQL and App Service performance. Support auto-scaling rules for high-demand racing events. Optimize storage, cold/warm data tiers, and retention policies. Ensure low-latency real-time updates (SignalR-backed services). Operational Responsibilities Manage incident response and root cause analysis. Implement backup, restore, and disaster recovery procedures. Work with backend/frontend teams on deployment readiness. Enforce environment standards and configuration consistency. Maintain cloud documentation, runbooks, and architecture diagrams. Requirements Technical Skills 3-7+ years in cloud engineering, DevOps, or infrastructure roles. Strong experience with Azure services: App Service Azure SQL Storage Accounts (blobs/queues/tables) Azure Functions VNETs, networking, firewalls API Management Azure AD / Entra ID Key Vault Monitoring & Application Insights Experience with CI/CD: GitHub Actions or Azure DevOps Deployment slots Automated migrations Infrastructure-as-Code experience (Bicep/ARM/Terraform). Strong understanding of security, identity, and environment isolation. Nice to Have Experience supporting .NET/Blazor/MAUI app deployments. Familiarity with Clean Architecture and modular monolith patterns. Understanding of real-time systems (SignalR). Experience with containerization (Docker) and Azure Container Apps or AKS. Experience with Sports technology or IoT-like hardware integrations. SQL performance tuning experience. Soft Skills Strong communication and documentation skills. Ability to work cross-functionally with developers, designers, and leadership. Operates with high ownership and problem-solving initiative. Thrives in a fast-paced, evolving startup-style environment. CBTS provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws.

Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems KODIAK Construction Recruiting & Staffing Cincinnati Metropolitan Area (On-site) Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems in Cincinnati, OH We're hiring a licensed Mechanical Engineer (PE) with deep expertise in hydronic systems-water and steam boilers, chilled water, and full HVAC system design-for complex industrial and commercial environments. This role owns the design, analysis, and stamping of mechanical systems while supporting project managers, sales, and field operations to deliver code-compliant, construction-ready solutions. Key Responsibilities Lead mechanical and hydronic system design for design-build projects. Review, seal, and approve permit-ready drawings (Ohio PE required). Provide engineering oversight and mentor junior designers. Ensure all designs meet IMC, IFGC, ASHRAE, and energy code requirements. Develop calculations and system models using Carrier HAP, AutoCAD, Revit, and Excel. Support QC reviews and participate in client-facing technical meetings. Apply engineering expertise in process steam, process piping, and process water systems for industrial and/or food-grade facilities. Qualifications Ohio PE License (required); KY/IN PE or ability to obtain within 12 months. 5+ years of mechanical/HVAC design experience with strong hydronics competency. Experience with industrial process systems; ammonia refrigeration experience is a plus. Proven commercial/industrial project background. Proficient in load calculation software and CAD/Revit platforms. Strong code knowledge and design best practices. What's In It for You Competitive compensation + 401(k) with company match Medical, dental, vision, life, disability Tuition reimbursement + PE license support Paid vacation, sick leave, and holidays National resources backed by local leadership Seniority Level Mid-Senior level Industry Construction HVAC and Refrigeration Equipment Manufacturing Employment Type Full-time Job Functions Engineering Skills Revit Mechanical Systems Computer-Aided Design (CAD) Industrial Engineering Hydronics Ammonia Refrigeration Commercial Projects Boilers Chilled Water HVAC

-Design life safety and asset protection systems using AutoCAD and proprietary software applications, adhering to local, national, and manufacturer requirements. -Direct contractors in the proper installation and operation of systems. -Survey job sites to ensure proper system design and installation. -Read, review, and implement customer-supplied project specifications. -Attend manufacturer training classes and other continued education training -Create project-specific operation and maintenance manuals. -Update existing drawings. -Assist office staff with engineering-related tasks such as process improvement. -Assist with system inspection and maintenance (if needed). -Assist in system startups and commissioning (if needed). Qualifications: -Previous experience in the Fire Protection Industry is required -Previous experience as a Design Engineer -Proficient knowledge of AutoCAD 2D drafting. -Knowledge and efficient use of 3D design software. -Understanding of MS Office applications. -Good organizational skills. -Ability to communicate technical information. -Desire to learn industry standards. -Willingness to study for and obtain NICET certification.

University of Cincinnati R&D Engineer Co-op- University of Cincinnati Students ONLY Your first step towards an amazing career in Research and Development (R&D) at Procter and Gamble (P&G) starts with applying to this co-op. Within an R&D co-op, you'll be actively involved in creating, reimagining and launching new innovations which improve our consumers lives… all around the world. The duration of our co-ops range from 12-24 weeks within the fiscal year. As a co-op, you'll receive a co-op allowance. At P&G, Intern/Co-Op sessions are considered temporary employment, with a predicted ending point. No full-time employment commitments are made. As a company, P&G believes that 'innovation is our lifeblood'. As such, we invest to ensure that our products best serve the current and future needs of our more than 5 billion consumers worldwide across our 65 iconic, trusted brands. From Day 1, you'll be equipped with powerful innovation tools, you'll be encouraged to dive into the innovation process, and you'll be tasked to advance real needs for our business. To enable your success, you'll collaborate with dedicated technologists and mentors to strengthen your skills and develop new areas of mastery. The environments you'll work in are creative workspaces where new insights thrive and where your technical mastery is recognized and rewarded. Ultimately, our investment in you is equally an investment in the development of our future R&D talent and in advancing our lofty innovation goals. What will I do? Our co-op's are constantly learning, growing in service of improving how our products perform. In this role, you will find new ways to innovate, develop and manufacture consumer products. Since we're a highly collaborative company, you will have the opportunity to work with some of the best and brightest technical and commercial partners. We strive to match your skills, qualifications, and interests with a role that works best for you and have a number of areas in R&D where you could work as a co-op, including: * Products Research: Deeply understand our consumers and their needs in order to advise product design parameters for new or improved products. * Product Formulation & Design: Translates the consumer's needs into the development of fabulous finished-products which use the best available technologies/chemicals/materials. * Packaging & Device Development: Creates and improves packages and devices that delight consumers and retailers. Packaging and Device technologists own the development of packages of superior function and premium design. In addition to ensuring the product functions well once the consumer has brought it home, we place a premium in ensuring that our packages and devices are responsibly developed with sustainability in mind. * Process Development & Pilot Plant Operations: Translates ideas, concepts, and technologies into the design and scale-up of commercially feasible, powerful, chemical and mechanical manufacturing processes. * Material Development: Start by developing 'new to the world' raw material technologies so we can meet our customer's needs with the highest quality, best performing materials. * Modeling and Simulation (M&S): M&S development is a powerful capability which increasingly underpins the work across all our R&D functions. Our M&S experts are developing new to the world mathematical models which speed the pace and impact of our innovations. * Data Science: Here, we would want you to communicate sophisticated data or algorithms into simple conclusions that will empower others to drive action based on the insights you derive. As a Data Scientist, you will transform the business to enable better decision-making through the use of advanced analytics. Job Qualifications REQUIRED: * In progress towards a BS or MS in, life or physical science field such as Chemistry, Biology, Biochemistry, Analytical and Measurement Science, Microbiology, Packaging Science, or a related field. We offer a wide range of roles for Chemical, Mechanical and Biomedical Engineering. Increasingly, we have roles suited for Data Science/Analytics, Electrical Engineering, Robotics or other related engineering fields. PREFERRED: * Engineering experience in design, coding, testing, deployment, and support. * 3D CAD design proficiency * Computer programming languages, such as C, C++ * Experience with MCU software development What we offer: * Responsibilities as of Day 1 - you will feel the ownership of your project from the beginning, and you will be given specific projects and responsibilities. * Continuous mentorship - you will work with passionate people and receive both formal training as well as day-to-day mentoring from your manager. * Work and be part of a dynamic and encouraging environment - working over a diverse array of interesting problems. * Promote agility and work/life balance for employees, we value every individual and support initiatives. * Experience true support for work/life effectiveness and your long-term well-being. * Get a competitive salary and benefits' package. JUST SO YOU KNOW: Compensation for roles at P&G varies depending on a wide array of non-discriminatory factors including but not limited to the specific office location, role, degree/credentials, relevant skill set, and level of relevant experience. At P&G compensation decisions are dependent on the facts and circumstances of each case. Total Rewards at P&G include salary + bonus (if applicable) + benefits. Your recruiter may be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the hiring process. We are committed to providing equal opportunities in employment. We value diversity and do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Immigration Sponsorship is not available for this role. For more information regarding who is eligible for hire at P&G along with other work authorization FAQ's, please click HERE. Procter & Gamble participates in e-verify as required by law. Qualified individuals will not be disadvantaged based on being unemployed. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Job Schedule Full time Job Number R000134835 Job Segmentation Internships Starting Pay / Salary Range $29.00 - $50.00 / hour

Shift 1 (United States of America) A Mechanical Engineer solves problems using advanced concepts, defines/modifies/creates required engineering/design practices, manages projects and delegates tasks, leads compliance to standard processes, ensures own work and supports others to ensure on-time, error-free designs. Resolves technical issues and effectively escalates team issues and helps others do the same. Essential/Key Functions: Works independently to solve technical problems and deliver engineering solutions Understand requirements and converts requirements into engineering work products Provide guidance to less-experienced engineers Respond to requests from Manufacturing, Sourcing, Quality, and other functional groups Demonstrates Milacron values Takes full accountability of personal work Sets priorities for workflow Develops and proposes solutions to difficult problems Minimum (Required) Qualifications: 3-5 Years of Progressive Engineering experience BS Engineering or equivalent combination of education/experience/training plus additional specialized training related to the position General knowledge on multiple subsystems General knowledge of cross-functional processes Working knowledge of Enterprise Resource Planning (ERP) tools. Proficient in MS Office tools Ability to use a number of collaboration tools such as team-based document control, video conferencing, scheduling meetings, conference calls, etc. Strong problem-solving skills with sound decision making based on structured data analysis Multi-disciplined Systems engineering background preferred. #LI-MR1 #LI-ONSITE Who we are: Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. EEO: The policy of Milacron is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. We are committed to being an Equal Employment Opportunity (EEO) Employer and offer opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@milacron.com. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Zachary Piper Solutions is seeking a Secret-cleared Mechanical Design Engineer to support a long-term Air Force program in Cincinnati, Ohio. This role requires strong Siemens NX expertise and the ability to contribute to a high-visibility engineering effort. Responsibilities: * Interpret and modify designs within NX modules, including Modeling, Drafting, and Assemblies * Automate engineering workflows using Perl, Python, or CGI * Utilize foundational knowledge of the Teamcenter environment * Apply GD&T principles to support batch processing, design rule checks, and custom toolbar plug in monitoring * Review and navigate log files within NX Manager Qualifications: * 3+ years of CAD design experience * Proficiency with Siemens NX * Experience with Perl, Python, or CGI scripting * Ability to obtain and maintain a government background check Compensation: * Salary range: $130k-$160k * Full benefits package including Medical, Dental, Vision, 401k, PTO, Sick Leave (as required), and Holidays This job opens for applications on 12/3/2025. Applications for this job will be accepted for at least 30 days from the posting date. Secret Clearance, Mechanical Design Engineer, Mechanical Engineer, CAD Design, Siemens NX, NX Modeling, NX Drafting, NX Assemblies, Teamcenter, GD&T, Geometric Dimensioning and Tolerancing, Engineering Automation, Scripting, Python, Perl, CGI, NX Manager, CAD Workflow Automation, Air Force Program, Defense Engineering, DoD, Aerospace Engineering, CAD Designer, Log File Analysis, Design Rule Checking, Batch Processing, Cincinnati Engineering Jobs, Cleared Engineering Roles

Requirements ESSENTIAL DUTIES AND RESPONSIBILITIES Support R&D programs by performing broad spectrum V&V activities. Responsible for routine and administrative tasks. Responsible for maintaining a clean and safe environment. Responsible to project teams as a subject matter expert in electro-mechanical verification and validation of medical devices. Lead communication and provide issue escalation support to project teams. Responsible for conducting physical, electrical and functional evaluations of products. Develop detailed test plans for devices under test. Collection of complex data streams using standard and custom instrumentation. Data analysis and presentation using spreadsheets, programming, and statistical software. Research literature to justify test parameters and evaluate designs. Author test reports in compliance with company standards and procedures. Implement established and new processes and procedures under supervision. Coordinate with contract test labs for test scheduling, methods, acceptance criteria, results analyses and reporting. Attend offsite testing to witness and assist. Responsible for developing new test methodologies to best verify and validate both on-market products and R&D prototypes. Regularly troubleshoot, diagnose, and repair existing test equipment. Design and modify fixtures to aid in testing. Work with engineering, quality and regulatory to ensure products maintain certification to applicable standards. Ability to quickly gain an understanding of these standards. Read and analyze engineering drawings, interpret professional journals, technical procedures, and government standards and regulations. Exercise judgment within defined processes and procedures on moderately complex issues. Thorough understanding of processes and procedures within job function and working knowledge across other functions. Provide verbal and written communications subject to peer and management review. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Competency with Microsoft Office Applications and CAD modeling/design capabilities (mechanical and electrical). Experience with SolidWorks and Altium as well as other technical software tools is a plus. Proficiency, hands-on experience and trouble-shooting skills with equipment pertinent to job function (i.e. electro-mechanical systems, computer systems, instrumentation, various testing equipment, PLCs, data acquisition systems, hand and power tools, machining equipment, etc.). Mechatronics and/or electro-mechanical test lab experience is a plus. Knowledge and/or experience with machining, metal working and fabrication is a plus. Enjoy a shop/lab setting requiring hands-on functions. Track record of test activities accountable to business or customers for program success is a plus. Exposure to and/or basic engineering understanding of design principles related to mechanical and electrical assemblies, electro-mechanical/hydraulic devices, motors, control systems, test equipment, data collection, instrumentation and calibration. Exposure and/or basic understanding of medical devices is a plus. TRAINING REQUIREMENTS FERNO Quality Management System (QMS) training applicable to position OSHA training EDUCATION and/or EXPERIENCE Associate's degree (A.A.) in Mechanical Engineering Technology, Mechatronics or equivalent from a two-year or technical school or two plus years related experience. Equivalent combination of education and experience considered. COMMUNICATION SKILLS Ability to read, analyze and interpret engineering drawings, general business periodicals, professional journals, technical procedures and government regulations. Ability to write technical documentation, procedural manuals and business correspondence. Ability to effectively present information and respond to questions from groups, managers, clients, and customers. MATHEMATICAL SKILLS Ability to work with mathematical concepts, fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagrammatic, or scheduled formats. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manual labor will constitute up to 50% of role. This position requires the employee to move steel, aluminum, device components, etc., from tables and processing equipment. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work area may be loud. Use of eye, hearing and other personal protective equipment as required. Ferno is an equal opportunity employer and that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are looking for you to join our team as a **Lead Navigation Warfare (NavWar) Digital Engineer** based out of **Beavercreek, OH (Dayton, OH)** . Engineers here are part of multi-disciplinary program teams implementing next-generation navigation warfare products critical to US customers and allies. Team members conduct all phases of these programs, including requirements generation, hardware-selection, software development, and system integration and test. We are seeking engineers with the desire to learn new technologies to join our innovative organization to help develop, enhance, and maintain DSP designs on cutting edge products and systems. The ideal candidate will have exposure to: + Design of NAVWAR technologies, including characterization of platform dynamics, environmental/interference effects, and jamming mitigation techniques with regards to GPS processing + Anti-jam GPS processing techniques and analysis (such as nulling, STAP, SFAP, SFAP-T, and/or differential GPS) + Algorithms associated with satellite acquisition, tracking, and receiver measurement formation + Hands-On experience with RF/Antenna electronics + Familiarity with integrated INS/GPS navigation systems involving exposure to Kalman filtering / estimation theory What you will be involved in: + Development and evaluation of A/J (Anti-Jam), GPS Denied environment technologies. + Provide technical guidance and monitoring for activities focused on simulation modeling and analysis of NAVWAR processing and performance + Analysis of GPS navigation performance in laboratory and flight test scenarios + Interface with relevant customers/stakeholders + Communication of status, issues, and results with program management and customers + Work with a team of navigation warfare experts in a team-based collaborative environment dedicated to advancing the state of the art + Apply your research and development skills to architect real-world products and capabilities well beyond purely academic or theoretical + Work with leading-edge navigation warfare (NavWar) systems, techniques, algorithms, and software to enhance mission success in contested environments + Present your ideas to internal and external groups; lead proposal activities; and represent Northrop Grumman at technical conferences and working groups **Are you seeking a challenging role with a strong team? Come define possible with us in Beavercreek!** _This role is contingent on obtaining Interim Secret clearance or higher prior to start date._ **Basic Qualifications:** + BS degree in Electrical, Computer or related Engineering discipline with 12 years of experience; or MS Degree in Electrical, Computer or related Engineering discipline with 10 years of experience; or PhD in Electrical, Computer or related Engineering discipline with 8 years of experience. + Demonstrated experience with signal processing algorithms + Demonstrated experience with GPS technologies + Demonstrated experience leading technical teams + US Citizenship is required + **Clearance:** Candidate must be able to obtain an Interim Secret clearance or higher prior to start date **Preferred Qualifications:** + Demonstrated understanding of Digital Control Theory + Experience leading technical teams + Experience with GPS and EW signal processing algorithms + Experience with RF receiver development, including system link budget and sensitivity analysis, ADC and receiver noise analysis, and baseband conversion and processing + Digital design experience and FPGA development experience in VHDL + Proficient with MATLAB with a digital signal processing focus + Proficient in C/C++, embedded SW design in Linux/UNIX and RTOS environments + Experience with GNU Radio or software-defined radios + Active Top Secret security clearance + Proven skills to include: team leadership, mentoring others, communicating with all levels of an organization internally and externally, being adaptable, creative, collaborative and also comfortable working independently and enjoys solving difficult problems _This position is contingent on funding and approval._ Primary Level Salary Range: $171,000.00 - $256,600.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Engineers are the reason we exist-they're the core of who we are. We don't just build technology; we engineer the future. From next-gen aerospace to cutting-edge defense systems, our teams power the solutions that drive innovation, tackle mission-critical challenges, and keep people safe. This is where problem-solvers and big thinkers thrive. Quest Defense Systems and Solutions is seeking a Senior Materials Engineer to grow with our company. In this role, the engineer will be assigned to a well-structured Engineering Support office dealing with Aero Engines / Gearboxes domain, will be in charge for the activities related to R&D, test, analysis and characterization of materials, Verify & Validation development processes of new materials, definition of technical specifications of special treatments, failure analysis/investigation on damaged and/or NC components, partnering with other Departments (i. e. Design, Quality, Manufacturing, Supply Chain etc) and directly interfacing with suppliers. Roles & Responsibilities: Support and drive material qualifications of new supplier's turbomachinery hardware ensuring robust processes while supporting supply chain capacity improvements. Prepare and present technical data to internal and external customers. Participate on business and industry teams supporting overall improvement in the application of special processes for turbomachinery parts. Provide technical and strategic support to supply chain through reviews and pre-production meetings. Define technical specifications and requirements. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Evaluate non-conformances by reviewing, analyzing requirements and acceptability criteria, recommend disposition procedures and maximizing producibility Required Skills (Technical Competency): We're excited to talk to you if your qualifications meet the following criteria: 8+ years of experience as materials engineer in aerospace or gas turbine industry manufacturing, quality systems and field support. Bachelor/Master of Science in Materials Engineering, Materials Science, or Metallurgy Experience with primary processing (powder metallurgy, isothermal forge, & heat treatment) of turbomacinery materials. In depth understanding of metallurgy, manufacturing processes and inspections such as primary melting, forging, heat treatment used in the Aerospace industry. In depth understanding of the supply chain Some expertise in Additive Manufacturing processes and technologies will be preferential; Broad knowledge about different materials (metallic, ceramic, composite, polymeric etc) and experience on characterization tests; laboratory operations experience (knowledge of procedures, equipments etc); Finite Elements Analysis background (knowledge of ANSYS tool advantageous but not mandatory) Knowledge about coating / surface treatments processes advantageous but not mandatory Good computer skills (Excel, PowerPoint, Word, Outlook) Project Management experience is desired, but not required Strong interpersonal skills and ability to work in a team environment Like to work in a fast paced, creative environment Enjoy people and dynamic teams with diverse experiences. We have fun together! US Citizen or Permanent Resident required Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement. Substantial amounts of telephone and computer work. Heavily Regulated Industries with strict adherence to procedures. Flexibility to meet business deadlines by staying late or arriving early. Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM Ability to use personal transportation to visit customer locations. Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Full compensation package is based on candidate experience and certifications Pay Ranges$85,000-$105,000 USD At Quest Defense Systems and Solutions, we don't just build technology - we engineer the future. From next-generation aerospace solutions to cutting-edge defense systems, we tackle the toughest, mission-critical challenges that keep people safe and push the boundaries of innovation. This is where problem-solvers, innovators, and visionary thinkers come together to shape the future. With over 25 years of aerospace and defense engineering expertise, our commitment to delivering high-quality, transformative solutions sets us apart - not just as an industry leader, but as a driving force for impactful change. Together, we're not just leading the industry - we're revolutionizing it. Quest Defense provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

We are seeking a Product Design Engineer to drive product innovation and ensure compliance with industry standards. Reporting to the Code Compliance Supervisor, you will oversee and conduct material testing, collaborate with third-party testing facilities, and support new product development initiatives. This is an exciting opportunity to influence product design, quality, and market success. If you thrive on hands-on problem-solving, enjoy driving product innovation, and want to collaborate with a talented, dynamic team, AZEK offers the environment to grow your career. Essential Duties and Responsibilities: Provides technical support to product development of current and future products to include third party testing, installation, and code related questions from all interested parties; duties may include writing installation instructions, new and current product testing to code compliance standards, current and new product installation evaluations. Conducts research in areas of product development, testing requirements, and code requirements, Project management of assigned and special interest projects. This position will also directly/indirectly lead additional personnel and multi-functional teams, on a project-by-project basis. Generates clear and concise test data and reports on results of findings. 15% to 20% travel to third-party testing facilities, industry conferences, field site visits, and code related hearings. Qualifications, Education and Experience: Engineering degree in Mechanical or Civil Engineering required. Experience or training in construction or product development a plus. Two (2) plus years of experience in a similar position. SolidWorks CAD or similar experience. In-depth knowledge of construction framing techniques and building codes, a plus. Strong computer skills to include Microsoft Word, Excel, PowerPoint, Access, PowerPoint, and Outlook. Excellent problem-solving abilities and mathematical aptitude. Mechanical & analytical aptitude in test methodology and construction techniques. Ability to read architectural blueprints. Success in planning, executing, and managing projects. Working knowledge of powered hand tools, basic hand and layout tools used in construction. Helpful to have a working knowledge of standard laboratory equipment such as Univeral Mechanical tests frames, load cells, enviromental conditioning chambers, scales. Precise and articulate written and oral communication; ability to speak clearly and persuasively in positive or negative situations and have individual and group presentation skills to a wide range of audiences. Must be self-directed and motivated and able to multi-task in fast-paced, 24/7 manufacturing environment. Work schedule flexibility, with advance notice, to accommodate needs of the business. Our compensation reflects the cost of labor across several geographic markets. The annual salary for this position ranges from $81,500 in our lowest market up to $98,500 in our highest market, plus bonus, equity, and benefits as applicable. The pay for roles at AZEK varies depending on a wide range of factors including but not limited to the specific work location, role, skill set, and level of experience. The AZEK Company was acquired by James Hardie. James Hardie is the industry leader in exterior home and outdoor living solutions, with a portfolio that includes fiber cement, fiber gypsum, composite and PVC decking and railing products. Our family of trusted brands includes Hardie , TimberTech , AZEK Exteriors, Versatex , fermacell , and StruXure . With over 8,000 employees and our U.S. operating entities headquartered in Chicago, we boast 31 operating sites, 6 recycling facilities, and 6 research and development centers globally. Powered by a dynamic workforce, we're united by our purpose of Building a Better Future for All™ through sustainable innovation, a Zero Harm culture, and a commitment to empowering our people and communities. For more information, visit www.jameshardie.com . Are you concerned that you don't meet every requirement listed above? Don't let that stop you from applying! Studies reveal that some applicants refrain from applying for jobs unless they fulfill every single requirement. We don't believe in the notion of a "perfect" candidate. If you are confident in your ability to excel in the role, adapt swiftly, and are committed to contributing to our mission of building a more sustainable future, we warmly welcome your application. Join us in shaping the future of our business! #LI-SZ1

About ITT: ITT is a leading manufacturer of critical components for harsh environments that serves fast-growing end markets in flow, aerospace and defense, energy and transportation. Building on our heritage of innovation, we partner with our customers to deliver solutions to the key industries that underpin our modern way of life. Headquartered in Stamford, CT, we have more than 11,700 employees globally with operations in ~40 countries and sales in more than 125. At our core is our engineering DNA, with 1,280+ engineers, 1,700+ active global patents and ~51 manufacturing locations. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Industrial Process: A global leader in centrifugal and twin-screw pumps and engineered valves for chemical, energy, mining, and industrial applications. Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Bornemann, Habonim, Engineered Valves, Rheinhütte Pumpen and Svanehøj. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary KONI, an entity of ITT Corporation's Motion Technologies Division, has been in business for 150 years, involved in automobile dampers since 1932 and has produced adjustable telescopic dampers since 1945. In addition, though known best for cars, KONI also builds shocks for trucks, buses, RVs and railway rolling stock as well. What this adds up to is well-earned design and manufacturing experience. For more information, visit **************** Position Summary: The Manufacturing Engineer is responsible for designing, implementing, and improving processes and systems in a production and warehouse environment. The role involves optimizing the efficiency, quality, and safety of manufacturing and warehouse operations while minimizing costs. This position is also responsible for the repair of mechanical or electromechanical machines, equipment, tools, engines, and systems. The role may incorporate inspection and test requirements into the production plan. In addition, the Manufacturing Engineer is responsible to inspect performance of machinery, equipment, and tools to verify their efficiency, and investigate and initiates corrective action of problems and deficiencies to ensure product quality. This position is based on site in Hebron, KY USA. Essential Responsibilities Provide advice regarding opportunities for improvement for productivity and efficiency. Write investment proposals for machines, equipment, and tools. Support/advise the R&D Department (implementation and possible production method, production costs and tests) in order to come up with a justified design, including calculating the change of the production costs as a result of a design and/or process modification. Manage and coordinate suppliers during the complete process; RFQ, Negotiation, on-site activities, and final inspection of the product or service (FAT and SAT). Analyze the project obtained command (production optimization, troubleshooting, product modifications, production deploy quality improvement processes, studies of defects in production parameters realize and correct etc.). Collect information and determine the required boundary conditions (product analysis, process analysis, market research production process). Formulate and implement plan of approach, program requirements, experiments, purpose and outcome of the project and planning in consultation with senior management, production management, and, if necessary, assembling the project team. Lead full scale project management activities including project planning with respect to time, quality and budget. Search and analyze potential production technologies. Support the Purchasing Department in the assessment of suppliers and purchasing negotiations and guide customer audits. Lead change of plant lay-out based on the purchase of new means of production or process changes and/or optimization of production. Responsible for the project administration and training. Work collaboratively with R&D, Purchasing, Production, Quality, Sales and any external project partners. Report to management of project progress with regard to results, deviations and deviation causes. Quickly respond to machinery breakdowns to minimize downtime. Analyze and troubleshoot mechanical, hydraulic, and pneumatic systems. Use diagnostic tools and technical manuals to identify and resolve issues. Perform routine inspections and preventive maintenance on machinery and equipment. Diagnose and repair mechanical issues, including motors, conveyors, and production machinery. Replace worn or defective parts to prevent machine failures. Calibrate and adjust machinery to ensure proper functionality. Compliance with business rules, environmental and safety requirements The above is intended to describe the general context of, and the requirements for, the performance of the position. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Position Requirements Bachelor's degree in Engineering or related area Lathes, machining centers, drilling and grinding machines, cleaning machines, welding machines, robots and various mounting machines etc. Production processes and management systems Operating principle of shock absorbers & Mechanics Project management & process analysis PLC software principles. ERP systems, Solid works, AutoCAD Key Behavioral Traits for Success: Attention to Detail - Able to be alert in a high-risk environment; follow detailed procedures and ensure accuracy in documentation and data; carefully monitor gauges, instruments, or processes; concentrate on routine work details and maintain a system of records. Safety - Always has safety as their first priority; is comfortable addressing safety deficiencies with other employees; and, functions as a safety advocate. Quality - Able to maintain high standards; do work right the first time and inspect material for flaws; reinforce excellence as a fundamental priority. Interpersonal Communication Skills - Able to share due credit with coworkers; display enthusiasm and promote a friendly group working environment; work closely with other departments as necessary; support group decisions and seek opinions from coworkers; and display team spirit. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. #LI-RL1 #MT1 Equal Pay Act Statement We aim to pay our ‘ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on ‘what' they accomplish, but also on ‘how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range Annual salary range is $93,100 to $139,100, plus benefits Not ready to apply? Connect with us for general consideration.

We are the movers of the world and the makers of the future. We get up every day, roll up our sleeves and build a better world -- together. At Ford, we're all a part of something bigger than ourselves. Are you ready to change the way the world moves? As part of our Manufacturing team, you'll help build the world-class, state-of-the-art smart vehicles we're known for. In our plants around the world, we're constantly developing new technologies and processes to further increase our efficiency. You'll get the satisfaction of making great products people use and love. In this position... You will manage the flow of materials through the facility to support production flows within the production and warehousing operations. You'll have... Bachelor's Degree 2 or more years' of materials experience Even better, you may have... Bachelor's Degree in Engineering Demonstrated experience working with all levels of the organization Experience working collaboratively on teams and driving Demonstrated leadership behaviors combined with outstanding interpersonal, teambuilding, and communication skills Experience working in a manufacturing plant environment Tenure working in the automotive industry Microsoft Office (Excel/Word/PowerPoint/Outlook/Access) Knowledge of AutoCAD Validated functional expertise in material flow Strong understanding of lean material flow strategies & lean manufacturing processes You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all the above? No matter what you choose, we offer a work life that works for you, including: Immediate medical, dental, and prescription drug coverage Flexible family care, parental leave, new parent ramp-up programs, subsidized back-up childcare and more Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more Vehicle discount program for employees and family members, and management leases Tuition assistance Established and active employee resource groups Paid time off for individual and team community service A generous schedule of paid holidays, including the week between Christmas and New Year's Day Paid time off and the option to purchase additional vacation time. For more information on salary and benefits, click here: ********************************** This position is a range of salary grades 6, 7 and 8. Visa sponsorship is not available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. #LI-Onsite #LI-BS2 What you'll do... Provide engineering support for material flow process; document standards and procedures, provide training, overall adherence and maintenance to ensure materials are available in designated stock, markets and line locations throughout the facility Work with Planning & Inventory Control, Production, Material Handlers, and Supply Chain to ensure robust policies are available and practiced and strive for continuous improvement Apply technical expertise, commensurate with formal training and limited job experience, in the development of material flow processes Design and/or develops material flow processes and equipment Recommend changes to increase safety, reduce costs, improve quality and optimize efficiency Participate in plant layout activities Develop floor space analyses to confirm storage requirements and recommend practical solutions where required Assist in qualifying manual and powered material handling equipment requirements Work to improve material flow and manage materials and inventory consistent with Lean principles Lay out market, sequencing, and kitting areas to facilitate material handling, process flow, space utilization, and labor Define and manages in-plant storage and call systems to maintain inventories; assists to define appropriate goals and metrics for proper material control Provide vehicle and pedestrian flow/congestion/safety analyses and recommend practical solutions where required Interact on a regular basis with other functional groups and vendors on technical and/or administrative matters Work with Production, Production Control, Supply Chain, Quality and other engineering departments Prepare detailed plans, generally spanning several months, vital to complete assigned projects Develop and approves schedule milestones Develop and coordinate labor, facility and equipment requirements for assigned projects Propose alternate plans for economic evaluation Administer technical procedures including process and work procedures Implement an industrial engineering system (standard cost data, capacity and equipment requirement forecasting, shop floor control system)

Apex Order Pickup Solutions is looking for a Senior Product Design Engineer to join the team at our global headquarters in Mason, Ohio. Are you looking for a great opportunity to become a key mechanical technical contributor on various exciting new development initiatives in the IoT & SaaS space? We leverage many of the latest emerging technologies to bring a seamless handoff of goods & materials to end users around the globe, while working on new additions to our already deep & innovative portfolio of real-world solutions that touch millions of users. Apex Order Pickup Solutions applies innovative, scalable software & hardware to enable safe, secure, frictionless order fulfillment for foodservice, retail, & wholesale distribution companies. We are providing transformative Contactless Pickup solutions to a rapidly expanding global client base. We don't just talk about the Internet of Things & Big Data …we live it. We use both every day to enable customers to perform contactless pickups of their coffee, pizza, take out, & curbside orders or laptops. Our technology is helping Brands save time & reduce contact with their customers enabling killer customer experiences without killer overhead costs. What you'll be doing: As a Senior Product Design Engineer, you are responsible for supporting the full product development lifecycle with the creation of state-of-the-art product structures & mechanisms. This role would include supporting program planning, design definition, 3D CAD, 2D CAD, concept design, model rendering, product testing, & rapid prototyping. Lead front-end concept generation and translate ideas into a manufacturable design. Populate various mechanical development work products to define the mechanical architecture such as requirements, production specifications, service specifications, validation & verification specifications, test procedures, etc.… Create detailed CAD models and assemblies with a focus on molded components produced from molding technologies such as injection molding, castings, thermoforming, resin transfer molding, vacuum forming, compressing molding, etc.… Support cable management & component mounting strategies based on internal guidelines. Support the production of 2D component drawings with appropriate GD&T. Research & present various manufacturing methods in effort to reduce product costs while maintaining structural integrity. Establish & test joint torque specification to achieve appropriate clamping load as needed. Design & build test fixtures for executing product validation efforts. Fabricate production intent rapid prototypes as needed using the model shop machinery. Support marketing efforts with 3D rendering & fabrications. Operates CNC machines for component & mold creation. What you'll bring: B.S. degree in Mechanical Engineering, Industrial Engineering, or equivalent technical field experience. Minimum of 10 years producing mechanical components in a product development environment. Expertise in working with CAD platforms such as SolidWorks. Expertise in CAD to CAM integrations. Expertise in additives, resins, & component aesthetics. Proficiency with various fabrication tools for creation of prototypes. (Ex. Table saws, CNC machines, 3D printers, belt sanders, heat bending, vacuum forming, casting, lathe, mills, etc.…) Excellent communication and interpersonal skills. Exposure to various manufacturing methods based on materials such as metals, composites, & plastics. Proficiency in designing class A surface components. Proficiency in designing solutions for various seam & edge treatment applications. Preferred qualifications: Mastery knowledge of GD&T based on manufacturing methods. Understanding of ASME Y14/ANSI Y14 standards. Experience with rendering in SolidWorks Visualize. Experience designing components utilizing various forming methods such as RIM, ROTO, thermoforming, vacuum forming, casting, compression, resin transfer, etc.… Experience designing components utilizing various metal fabrication methods such weldments, CNC routing/milling, laser cutting, stamping, hot/cold rolling, bending, extruding, etc.… Experience designing components utilizing snap fit joints. Experience working with regulatory bodies such as NSF for food grade sanitization. Why Join Apex Order Pickup Solutions? Competitive salary Hybrid work schedule (in-office Tuesday-Thursday, remote Monday and Friday) Comprehensive benefits: medical, dental, vision, life insurance Paid time off for volunteering FSA, HSA, and supplemental insurance options 401(k) plan with company match Apex Order Pickup Solutions is an Equal Opportunity Employer.

Solve Industrial Motion Group strives to be the trusted source for engineered bearings and power transmission solutions. Supported by a diverse range of products within Solve's brand portfolio and our unmatched technical expertise, we have over 100,000 ready-to-ship components. At Solve we innovate with ambition, offering custom solutions in a wide range of applications. We obsess over our customers, leveraging our nationwide network for industry leading product availability, and best-in-class customer service. Our engaged team leads with integrity, and unites with purpose, driving toward innovation and continuous improvement every day. POSITION DESCRIPTION: Reporting to the Director of Engineering, the Manufacturing Engineer will be responsible for developing, implementing and improving manufacturing processes to enhance productivity, quality, safety and cost efficiency. The ideal candidate will utilize their problem-solving and analytical skills while collaborating on projects with the design, quality, supply chain and operations departments to ensure seamless production and continuous improvement of manufacturing systems. The Manufacturing Engineer will exercise their strong communication skills when providing product application support to both internal and external stakeholders. The ideal candidate will be diligent about staying updated with industry trends, best practices and emerging technologies to continuously enhance their skills and knowledge, while contributing to Solve's continued growth and success. **This position will sit in our Loveland, OH location** RESPONSIBILITIES: Prepare engineered solution documents and presentations, including engineering drawings, CAD models, project proposals and product literature Design and optimize tooling, fixtures, and work instructions for production operations, while implementing Lean Manufacturing principles to reduce waste and improve efficiency Reverse-engineering of products to develop, evaluate and improve manufacturing methods, processes and equipment Conduct time studies, workflow analysis, and capacity planning to balance workloads, and develop and maintain corresponding SOP's and process documentation Train and support operators, technicians and production associates in best practices to ensure compliance with safety, environmental and regulatory requirements Liaise with suppliers/subcontractors to confirm product specifications, verify drawings, validate product quality and maintain effective production standards Assist with quoting special projects and provide technical product expertise, calculations and support to customers and sales team Lead cost reduction initiatives while maintaining product quality and reliability QUALIFICATIONS: Bachelor's Degree in Mechanical, Industrial or Manufacturing Engineering, or related field 3+ years manufacturing engineering experience Strong knowledge of Lean Manufacturing, Six Sigma and continuous improvement methodologies Experience with CAD/CAM software (SolidWorks, AutoCAD or similar) and ERP/MRP systems Solid working knowledge of machining, assembly, automation and other manufacturing processes Familiarity with quality management systems (ISO 9001, IATF 16949 or similar) Geometric dimensioning and tolerancing (GD&T) implementation experience PREFERRED QUALIFICATIONS: Experience with bearings and mechanical power transmission products Automated production process experience OUR EMPLOYEE VALUE PROPOSITION: Market competitive benefits package, including company-sponsored health coverage, life insurance, 401(k) plan with company match, paid parental leave and paid time off Work in a collaborative environment with passionate and innovative teammates Solve is proud to be an Equal Opportunity Employer and prohibits discrimination or harassment of any kind. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, pregnancy, national origin, ancestry, citizenship status, age, marital or partnership status, sexual orientation, gender identity or expression, disability, genetic predisposition, veteran or military status, status as a victim of domestic violence, a sex offence or stalking, or any other class or status in accordance with applicable federal, state, and local laws.

The Package Development Engineering Contractor is responsible for supporting the Packaging Systems team member on Research and Development projects, Lifecycle Engineering projects or portions of major Packaging Systems development projects. The candidate must demonstrate the following capabilities: • Be able to apply knowledge of engineering principles and practices within assignment areas. • Plan, execute and controlling major sections of new package development projects. • Provide consultation and leadership on Package Engineering issues for operations and packaging strategies. • Be able to assess new packaging techniques and overall operations packaging capabilities, planning, and development, coordinating and directing package engineering projects concerned with unique problems which have an important effect on major company programs. • Direct the package development sub-team members to accomplish packaging and non-packaging related projects. Key Job Responsibilities: • Work in conjunction with the label development group to deliver packaging components in a timely manner for Research and Development and Packaging Systems projects. • Conduct assignments encompassing complete projects or portions of major projects requiring advanced knowledge of a specialized field. • Make decisions independently on engineering problems and methods. • Plan, conduct and direct major sections of new package development projects. • Determine methods and techniques to be used or adapts standard methods to meet variations. • Utilize technical competency, relevant work experience, and comprehensive and diverse package engineering knowledge to generate valid creative solutions. • Coordinate and direct the activities of technical support staff (both in-house and outside) in order to achieve objectives. • Design, develop, validate, and oversee manufacture, installation, and operation of package components and packaging processes for sterile surgical devices. • Plans, develops, coordinates and directs a number projects of major scope and importance. • Has full technical responsibility for interpreting, organizing, executing and coordinating assignments. • Develop general packaging guidelines and standards for processes and functional requirements. • No direct reports • Overnight travel may be required of up to10%. • Other responsibilities may be assigned and not all responsibilities listed may be assigned. Qualifications Qualifications: A minimum of a Bachelor's degree in engineering is required. Package Engineering degree preferred. Minimum of three years of experience working in industry required with one year of experience in packaging development. Regulated industry experience is an asset for this role along with medical device experience. • Experience with project management is preferred. • Experience in packaging design preferred • Design verification and validation is preferred. • The ability to effectively communicate, written and verbally, technical information and its implications to non-technical staff is preferred. • The ability to apply Six Sigma and/or lean tools is an asset. • Professional judgment to generate valid solutions to technical assignments is preferred. • The ability to function independently on specific assignment objectives requiring investigation of a limited number of variables and to function effectively with limited supervision is preferred. • Having the professional judgment required to resolve technical, package design, development and/ or processing issues, identifying the timing, and understand the interrelationships of key activities are all highly preferred. • Knowledge of packaging graphics, process development validation, testing, equipment and supplier processes are preferred. • Materials testing, documentation and ISO 11607 are also preferred for this role. • Personal computer skills should include the ability to effectively use Windows word processing, project planning, presentation, e-mail and spreadsheet software is required. • The ability to create packaging documentation using CADD (Computer-Aided Drafting and Design) software is preferred. • Education (degree preferred or required): B.S., Packaging Science preferred • Years of Experience Needed/Preferred: 1.5 needed, 2+ preferred • Technical Experience (ex: Word, Excel, etc.): MS Office, WORD, EXCEL, PROJECT - required. CAD skills an asset. Package Lab Experience an asset. Additional Information

Advanced Level Manufacturing Engineer Be involved in the product life cycle of for the defense and aerospace industry! We are in search of manufacturing engineers to join our team of experts! If this is THE job for you, just complete the quick and easy online application for consideration. FUNCTION: Respond to customer solicitations and provide to the manufacturing and production control departments all necessary documentation and information needed to efficiently complete the requirements of a customer contract. DUTIES AND RESPONSIBILITIES: Review and respond to request for quotes to improve overall quality, productivity and understanding of customer requirements. Create routers for tools and cost-effective routing through the shop, identifying ways for expediting product where possible. Provide technical assistance to supervision and machinists/fabricators with questions pertaining to the manufacturing process. Identify fixturing and special tooling needs as required. DESIRABLE KNOWLEDGE/EDUCATION High school diploma or GED required. Advanced level of experience in an engineering role that builds a product via CNC machines or through highly advanced fabrication. Preference is given for this experience in a defense or aerospace industry. DESIRABLE EXPERIENCE/SKILL Exceptional problem solving, troubleshooting skills, attention to detail and accuracy required. Excellent communication skills with ability to work with people at levels of the organizational. Working knowledge of GD&T and blueprint reading is required. RELATIONSHIPS: Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. Develop effective relationships with employees of all departments. Willing to share knowledge with those individuals who are responsible for producing parts that conform to the customer's requirements. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job description: We have a client in West Chester Ohio that has an immediate need for a (Civil/Structural) Research Engineer. Required: Master's degree in Civil Engineering with an emphasis on Structures, or related engineering field or equivalent combination of education and experience. Minimum of one year's experience with civil structural testing in general, or analytic investigation of steel behavior; some or all may be in relevant educational programs. Preferred: Knows the fundamental concepts, practices, and procedures of structural engineering; continues development of technical expertise and knowledge of steel behavior through experience and application. Essential Duties and Responsibilities: Using accepted engineering methods and techniques, solves well-defined problems and performs specific and limited portions of broader projects, under technical guidance of an experienced engineer. Applies standard structural test engineering practices and techniques in specific situations, adjusts and correlates data, recognizes discrepancies in results, and follows operations through a series of related detailed steps or processes. Defines and improves practices from experiences on small projects. Conducts experiments/tests in the laboratory/field that include taking measurements and recording observations, collecting, compiling, and processing data. Contributes data/findings for use in reports, documents, or oral/written presentations. Interacts in a collaborative manner with other team members to accomplish organizational goals; may provide ideas to improve efficiency at group level. Independently conducts small scale load tests and assists in the conduct of larger scale structural load tests. Contributes to the compilation (which includes developing plots or tables from collected test data, creating CAD drawings of the test assembly, documenting the test loading procedure, and/or reviewing drafts of the test report) and reporting of results. Directs activities of technical staff on specific assigned projects. This is a direct hire permanent position and pay will be based on experience level.

Manufacturing Engineer PURPOSE: The Manufacturing Engineer plans, directs and coordinates the development and refinement of manufacturing processes. Develops, evaluates and improves manufacturing methods, utilizing knowledge of materials, parts, tooling and production equipment capabilities, efficiencies, safety concerns, assembly methods, best engineering principles, and quality control standards. DUTIES/RESPONSIBILITIES: Document production equipment and processes to improve manufacturing process control, safety, and quality Create manufacturing process and controls to include documentation for production activities Support manufacturing operations in trouble shooting existing products and processes to minimize scrap and waste and assure reliable manufacturing capability Utilize Six Sigma methodology to make improvements to process to improve process capability & quality Respond to manufacturing problems or product non-conformances by using various quality tools to identify root cause, determine most effective solutions and implement corrective actions Identify and improve manufacturing profitability through productivity improvement, waste reduction and safety improvement Optimize production tooling and work holding to improve safety, quality, cost, and/or throughput Work with the Tooling Department to optimize production tooling requirements and design Work within company policy as outlined in the Faxon Handbook Perform other duties as assigned by the manager as needed REQUIREMENTS: Bachelor's degree or equivalent training and/or experience Solid background in 3D CAD techniques - Solidworks Previous machining background using CAM software preferred - Mastercam Experience in a machining environment including lathes, mills, edm and inspection equipment Understanding of GD&T, working drawings, and engineering terms and standards. Proficient in the current release of SolidWorks, Microsoft Word, and Microsoft Excel Ten (10) or more years of experience related to manufacturing environment Excellent problem solving skills Excellent organizational skills Must possess strong work ethic and project management skills Manage time effectively, in order to accomplish highest-priority goals and objectives Demonstrates effective spoken and written communication skills WORK ENVIRONMENT: This position also has a role in a professional office environment which routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. The noise level in the work environment and job sites can be loud when on the shop floor. While performing the duties of this job, the employee may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. When in the office environment the employee is in a sedentary role, however, some filing is required. This would require the ability to lift files, open filing cabinets and bending or standing on a stool as necessary. HEALTH AND SAFETY: Work in compliance with the Occupational Health and Safety Act and regulations. Follow Company safety rules. Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately. Maintain a clean and safe work area. PERSONAL PROTECTION REQUIREMENTS: Use or wear the equipment, protective devices or clothing that is required to be used or worn (When applicable to work environment): Safety shoes Safety glasses Hearing protection Other types of PPE as needed