Research and development engineer jobs in Glendale, AZ - 735 jobs

Mechanical Engineer Locations: Chandler, Arizona. Boise, Idaho. Albany, New York. Dallas, Texas. Raleigh-Durham, North Carolina. On Site Salary: $160,000 - $200,000 Bonus PMI Package Our client is seeking a Senior Mechanical Engineer (Onsite) to support the design and delivery of mission-critical data center projects. This role focuses on leading mechanical system design for high-availability environments, working closely with multidisciplinary teams from concept through construction and commissioning. The successful candidate will play a key role in developing HVAC and cooling solutions for data centers, including chilled water systems, air handling, and mechanical plant layouts, ensuring reliability, scalability, and energy efficiency. Key Responsibilities Lead mechanical design for data center infrastructure, including cooling and HVAC systems Perform and review load calculations, system sizing, and energy analysis Produce and review drawings and documentation using AutoCAD and Revit Coordinate with electrical, structural, and architectural teams Provide onsite technical leadership during construction, supporting RFIs, submittals, and commissioning Qualifications Bachelor's degree in Mechanical Engineering 7+ years' experience in mechanical engineering, ideally within data centers or mission-critical facilities Strong knowledge of data center cooling systems Proficiency in AutoCAD and Revit PE or working toward licensure preferred If you're looking to take a senior, hands-on role delivering high-impact data center projects, we encourage you to apply.

DRA Global Limited is an international multi-disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry. The Group has an extensive track record spanning almost four decades across a wide range of commodities. Our teams have deep expertise in the mining, minerals and metals processing industries, as well as related non-process infrastructure such as, water, and energy solutions. DRA covers all major mining centers with offices across Africa and the Middle East, North and South America, USA and Asia-Pacific. We are seeking a Mechanical Engineer, based out of our Phoenix office. This position is responsible for the engineering and discipline project design activities relating to concept, pre-feasibility, feasibility studies, EPCM and EPC projects. Main functions include (but not limited to): design engineering, technical support, package management, site support, commissioning, and documentation and handover. Engineering Carries out innovative detailed designs as required for specific disciplines following good engineering practices Designs conveyor and piping systems in area of responsibility (checked by relevant BMH or piping technical lead) Ensures that the quality of discipline designs are carried out in accordance with client standards and specifications, industry standards and the relevant legislation Provides design interface between disciplines Ensures certified design information received from vendors, contractors and consultants is accurate and interfaces with other designs Ensures the effective peer review and approval of discipline design Ensures continuous improvement, lessons learnt, value engineering, fit for purpose and latest technologies are implemented Is responsible for the engineering discipline sign off Interfaces with internal and external design and drafting disciplines Provides discipline inputs for studies and proposals Provides engineering support to the site team Performs commissioning discipline activities Manages the mark-up and back droughting of redline drawings Operational Management Provides input into all SHE matters, actively participates, and promotes a total safety culture. Ensures that relevant project procedures are complied with Ensures that fabrication, manufacturing, and construction drawings are issued according to the project programmer Manages the time schedule, cost, quality, risk and scope of assigned procurement packages. Ensures assigned packages are installed / constructed in accordance with the project & vendor specifications Manages, inspects and releases the relevant items of procurement, fabrication and construction within area of discipline and responsibility Participates in the Total Safety Culture of DRA and site safety requirements Assists with the commissioning of the assigned packages in accordance with the project & vendor specifications Ensures that reports are structured, accurate, complete and well presented Displays proactive communication with project team with respect to discipline interface and problem solving Financial Manages personal and design/droughting budget man-hours Manages budget as allocated per discipline/procurement package Ensures designs produced are in accordance with capital budget and quantities Ensures suitable contract management is applied to managed procurement packages Ensures proper change management procedure is adhered to Client Relations Ensures that all interactions with Clients are conducted in professional and respectful manner Ensures that Clients are kept informed and updated on the technical aspects of the project Ensures that DRA remains the Clients engineering service provider of choice Liaises and co-ordinates with the client's discipline engineers to ensure adherence to project and client requirements and specifications PHYSICAL REQUIREMENTS/CONDITIONS While performing duties of this job, you may be required to stand, sit, alternate between sitting and standing, push/pull as necessary, reach overhead or below shoulder level, kneel, squat, stoop, crawl, and work at heights utilizing proper fall protection. Ability to access all areas of the job site and conduct physical evaluations of grounds and equipment including ability to work at high elevations. Personal protective equipment may be required when performing work on-site, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, protective clothing, gloves, and any other PPE as required. Work may be performed on an active mining construction site with various associated risks. EDUCATION/SKILLS/EXPERIENCE REQUIRED Experience of onsite construction and commissioning experience within a multi-disciplinary team in Industrial, Mining & Minerals, Oil & Gas, or equivalent environment. Bachelor's degree in mechanical engineering preferred. Registered as a licensed Professional Engineer in the state of Arizona - desirable. Note: This position is hybrid to Phoenix, AZ with onsite presence required at our Tucson site***** DRA Global is committed to building a diverse and inclusive workplace where everyone feels valued and supported. We believe that diversity strengthens our ability to reach our goals, enhances our reputation, and helps us attract, engage, and retain great people. We welcome applications from individuals of all backgrounds, regardless of gender, age, disability, ethnicity, or any other characteristic. Our values - People, Safety, Trust, Integrity, Excellence, and Courage - reflect our ongoing commitment to equal opportunities and an inclusive culture.

Job Opportunity - Manufacturing Engineer - Electronics Manufacturing (Solar) - Phoenix, AZ I'm looking for a skilled Manufacturing Engineer with demonstrated experience - particularly from the solar industry - to help accelerate my client's manufacturing processes for new product introduction. This person will work closely with the Operations and Product Development teams to identify and lead cost reduction steps, quality improvement efforts, and help develop and test the functionality of electrical test equipment for manufacturing. Key Responsibilities: Identify and lead cost reduction steps and quality improvement efforts (ie labor, materials, etc) Test the functionality of electrical equipment based on system diagrams and test parameters Create conceptual designs for internal test equipment using block diagrams, circuit schematics, and test boards Travel as need be to solar tracker sites to perform troubleshooting, commissioning, retrofitting, and other technical support. Requirements: Bachelor's degree or equivalent in Electrical Engineering, Industrial Engineering, or similar (Electronics) At least 3 years' experience in manufacturing engineering, preferably with similar product type (solar/renewable hardware, electronics, motor controllers, etc) Knowledge of electronic product assembly processes and best practices. Experience optimizing manufacturing processes & DFM Experience with designing test fixtures & assemblies If this sounds like you & piques your interest, don't hesitate to apply here or reach out to me directly at ***************************** with your resume. ~Not accepting Visa sponsorships for this role - US Citizens & Green Card Holders only~ Job Opportunity - Manufacturing Engineer - Electronics Manufacturing (Solar) - Phoenix, AZ

A nationally recognized architectural and engineering consultancy is looking to add a technically sharp and forward-thinking Project Design Engineer - Structural to their team. With offices in key markets and a reputation for innovation and quality, this firm is known for tackling projects that span commercial, civic, and institutional sectors. You're being invited to join a dynamic team where your skills in structural design will be valued, and you'll have plenty of chances to learn and grow alongside talented colleagues in a supportive atmosphere. What You'll Do: Contribute to the design and documentation of building structures using steel, concrete, timber, and hybrid systems. You'll play a key role in ensuring structural elements meet regulatory standards and are thoroughly analyzed for both new construction and renovation initiatives. Work closely with project managers on design intent, deliverables, and timelines. Collaborate with architects, MEP engineers, and other stakeholders to align structural solutions with project goals. Participate in quality checks, internal reviews, and technical coordination across project milestones. Help assess design challenges and offer technical input to guide project direction efficiently. Qualifications: A background in civil or structural engineering with a bachelor's degree is required, and having a postgraduate degree would be a significant advantage. A strong background in structural engineering and building design is expected, with familiarity with a variety of materials and systems. EIT with active progress toward PE/SE licensure, or currently licensed as a PE/SE. Familiarity with relevant building codes and experience using structural modeling tools. Team-first mindset with a track record of positive collaboration and quality execution. Why Join This Firm? Work on impactful projects that are shaping skylines and communities nationwide. Mentorship from experienced professionals and a budgeted path for continuing education. Strong internal culture that promotes autonomy, creativity, and career progression. Benefits include: Comprehensive health, dental, and vision plans 401(k) with match Paid time off and company holidays Annual bonus potential Student loan repayment options Certification/licensure reimbursement Flexible schedules and work/life balance support If you're ready to grow your technical capabilities while making a lasting impact through structural design, this role offers a compelling path forward. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Posting Date 01/16/26 Application Deadline 01/23/26 Pay Range $70,000 - $107,000 annually Salary offers are based on the candidate's equivalent experience and internal equity with other employees within the same job classification. The position is not eligible for overtime compensation. Job Type Unclassified Department Transportation About the Position The Engineer Associate utilizes their technical knowledge and abilities to complete tasks that are often of high difficulty, requiring application of standard and non-standard techniques and procedures, and requiring independent judgment. This position works under the supervision of a licensed engineer and will focus on civil engineering plan review for permit projects. As a member of the Plan Review Team, this position actively supports the community by interacting with property owners, developers, contractors, and engineering consultants to facilitate the performance of construction activities within the County right-of-way. About Us We value your time. The time with your family. The time you spend on the road. And the time you spend making a difference. At the Maricopa County Department of Transportation (MCDOT), we provide connections that improve people's lives. By combining innovative technologies with the vast talent of our employees, we plan for future needs and operate a transportation system with the community in mind. Are you interested in contributing to the community in which you work, live, and play? Then, join our team and help us build connections. Proud to Offer Work with a greater purpose Tuition reimbursement Exceptional work-life balance Opportunities for growth and development within Maricopa County Low-cost, high-value healthcare for you and your qualifying dependents Child care benefits, including access to our on-site center, Maricopa County Kids Club, dedicated to serving Maricopa County families exclusively Paid vacation, sick time, and parental leave Extensive wellness program, including healthcare premium discounts Maricopa County participates in the Arizona State Retirement System. This defined retirement benefit requires a 12% monthly contribution rate and includes a 100% employer match on Day 1 Learn more at Work With Us | Maricopa County, AZ We Require Four years of professional pre-registration civil engineering experience; Or Four years of experience leading and performing senior-level technical engineering work; Or Bachelor's degree in Civil Engineering or a related field Certification as an Engineer-In-Training (EIT) may substitute for the experience An equivalent combination of post-secondary education and/or job-related experience may substitute for the required education on a year-for-year basis We Also Value Registration as an Engineer-in-Training (EIT) or successful completion of the Fundamentals of Engineering (FE) Exam through the Arizona State Board of Technical Registration Job Contributions Review plans and related documents for compliance with applicable standards for work occurring within Maricopa County right-of-way Coordinate with coworkers and others to ensure fairness and consistency in technical plan and document reviews Provide technical guidance to applicants regarding permit requirements; interpret and explain County rules and regulations, respond to requests for information; investigate and follow up on technical inquiries Review projects in the field during design and construction; review field revisions for projects under construction Coordinate requirements between various divisions, departments, and other agencies and municipalities. Other job duties as assigned Working Conditions This position requires the employee to be in the office/field or customer-facing for all hours worked Exerting up to 20 pounds occasionally, 10 pounds frequently, or negligible amounts constantly, or requires walking or standing to a significant degree Position is typically office or administrative work and is not substantially exposed to adverse environmental conditions Incumbent may be subjected to extreme temperatures, wetness/humidity, respiratory hazards, and noise and vibration Machines, tools, equipment, software, and hardware Microsoft Office, Adobe Acrobat, REVU Bluebeam plan review software, and proprietary permitting management software Protective equipment required Hard hat and safety vest Selection Procedure Only the most qualified candidates will be considered Consideration will only be given to candidates who submit online applications Candidates will be contacted primarily through email and their Workday online application profile Must pass a pre-employment background and/or fingerprint investigation as required by statute or policy, including drug and alcohol testing requirements for positions designated as safety-sensitive Maricopa County is an equal opportunity employer. Apply Now!

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For As a Senior Preconstruction Engineer, you will drive the bidding process for construction projects by crafting precise conceptual and hard dollar estimates, developing proposals, and managing subcontractor bids. You will ensure the accuracy and completeness of all project documents, perform quantity take-offs, conduct constructability reviews, and implement value engineering analyses. Your contributions will be crucial in shaping departmental strategies and fostering continuous improvement. The Specifics of the Role Proposal Preparation: Collaborate with the Preconstruction team to deliver accurate proposals across various business units, including Commercial, Industrial, Institutional, and Residential sectors. Quantity Take-Offs: Perform detailed quantity take-offs for specific scopes of work to support accurate estimating. Subcontractor Management: Oversee the solicitation process for subcontractor bids, build and nurture relationships with subcontractors, and maintain a comprehensive master list of subcontractors/vendors. Bid Evaluation: Prepare and analyze Bid Evaluation sheets to ensure competitive and fair bidding processes. Schedule and Conditions Review: Evaluate project schedules, assist in drafting General Conditions, and contribute to the final assembly of estimates for presentation to owners. Handoff and Support: Facilitate a seamless transition of estimates, bid information, drawings, and specifications to Project Management, and assist Project Managers with contract negotiations, change orders, and other project needs. Historical Data Management: Develop and maintain historical data on unit prices to inform future estimating and bidding processes. Requirements Education: Bachelor's Degree in Construction Management, Civil Engineering, Architecture, or a related field. Experience: 3-5 years of estimating experience in commercial construction, with a strong track record in project bidding and management. Technical Skills: Deep understanding of building construction, materials, systems, and market conditions. Proficiency in estimating and quantity takeoff software. Software Proficiency: Skilled in Microsoft Office Suite. Analytical Skills: Strong conceptual abilities with a knack for working with limited information, and proven technical skills in mathematical calculations. Meeting Experience: Experience participating in Preconstruction meetings and collaborating with cross-functional teams. Some Things You Should Know No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! Why Clayco? 2024 Best Places to Work - Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2024 ENR Midwest - Midwest Contractor (#1). 2024 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2024 ENR Top 100 Green Contractors - Green Contractor (Top 5). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Peterson Academy is an online learning platform offering long-form, in-depth courses from world-class instructors. We aim to make serious education accessible, engaging, and affordable. Our mobile app-built in Flutter-is the centerpiece of how students experience Peterson Academy. The Role We're hiring a Senior Flutter Engineer to take full ownership of the Peterson Academy mobile app as it transitions from external development to our in-house team. The app is feature-complete and launching soon; your role will be to maintain, evolve, and enhance it post-launch. You'll work closely with our backend, product, and design teams to improve performance, build new features, and ensure long-term stability. This is a hands-on engineering role with significant autonomy, direct product impact, and high expectations. Responsibilities Take over full code ownership of the existing Flutter app Implement new features and refine the UI/UX in collaboration with design Maintain and optimize app performance and reliability Manage app store submissions, updates, and release cycles Integrate with our backend (Supabase/Firebase) Collaborate with the web engineering team to ensure a consistent user experience across platforms Requirements 4+ years of professional mobile development experience 2+ years of production Flutter experience Proven track record shipping and maintaining apps in the App Store and Google Play Deep understanding of Dart, Flutter architecture, and responsive design Strong debugging and performance tuning skills Experience integrating with REST/GraphQL APIs Nice to Have Experience with Supabase or Firebase Experience working with video components or streaming platforms such as Mux Familiarity with full-stack web development using a framework like Svelte or React Interest in education and improving the learning experience Who You Are Highly conscientious Independent, proactive, and accountable Comfortable inheriting and improving an existing codebase Pragmatic about trade-offs between polish, performance, and speed Willing to work hard and take full responsibility for outcomes Excited by high-ownership, product-focused work What We Offer Competitive compensation Remote role (US-based) Opportunity to shape and own the mobile experience of a global education platform Small, high-velocity team building something meaningful To Apply Send your resume, cover letter, and links to your work (GitHub, portfolio, app store links, etc.) to ***************************

Title: Construction Cost Engineer Duration: 6-month contract (possibility for extension or conversion) Pay Rate: $50-$55.55/hr Job Description: We are seeking a Construction Cost Engineer to support the construction and commissioning of a large, high-tech industrial manufacturing project in the Southeast Phoenix metro area. This role will report to the Cost Manager and work closely with Construction Managers to ensure accurate cost controls and effective change management processes. Key Responsibilities: Review and process change orders and RFIs to ensure scope accuracy. Perform detailed breakouts for material, labor, equipment, and profit. Assign cost codes, confirm budget impacts, and prepare changes for internal approval. Utilize project management tools such as Procore and Smartsheets for cost tracking and reporting. Collaborate with clients and subcontractors to confirm information accuracy and respond to requests. This is a contract position with potential for extension or conversion based on performance and project needs. Qualifications: Required Skills & Experience: High school diploma or GED. 2+ years of experience on large industrial construction projects (e.g., data centers, semiconductor fabs, battery plants) with budgets ranging from $100M to $1B+. Strong knowledge of construction cost controls, including: Job cost reports Change management RFIs Budgets and commitments Contingencies and spend tracking Bid packages and field orders Category management Cost authorization packages Material quantity reporting Proficiency with construction PM software such as Procore and Smartsheets. Nice to Have: Bachelor's degree in a related field. LEED Certification.

**Compensation is between $85,000 to $95,000 DOE** **Hiring Bonus** At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our CA locations. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer #MV-L1

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

About the Company Prime Data Centers develops, acquires, and operates data centers for some of the world's largest enterprises. A private firm owned by a group controlling $6 billion in assets, with a 15-year tenure in technology and real estate development, Prime provides customers with ownership options and dynamic leasing models, defining a true corporate partnership. ************************ Onsite: Avondale, AZ About the Role The Project Engineer assists the product delivery team in performing focused tasks to support the construction lifecycle. The Project Engineer must be able to use Microsoft Office (Excel, Word, PowerPoint) and understand basic electrical and mechanical systems. They may be asked to focus on one or more of the following processes; generating a bill of material, preparing and reviewing submittals, soliciting quotes, performing basic quantity takeoffs, assembling PowerPoint presentations from multiple source documents, and printing, storing and retrieving design and engineering documents in the Document Management System. Responsibilities Collaborate with internal teams and external vendors to design, implement, and commission data center infrastructure projects. Translate technical requirements into project plans, schematics, and documentation. Ensure all work complies with design specifications, industry standards, and safety regulations. Support the deployment of power (UPS, generators, PDUs), cooling (CRAC/CRAH, HVAC), and structured cabling systems. Participate in capacity planning, risk analysis, and impact assessments for changes to the data center environment. Monitor installation progress, troubleshoot issues, and ensure quality control throughout the project lifecycle. Track project milestones, timelines, and budgets in coordination with project managers. Prepare and present technical reports, updates, and recommendations to stakeholders. Assist in vendor selection, procurement, and contractor supervision as needed. Maintain detailed records of system designs, configurations, and installations. Ensure compliance with industry regulations and internal standards. Qualifications Required: Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related technical field 3+ years of experience in data center engineering, construction, or operations Strong understanding of mission-critical infrastructure (power, cooling, cabling, network) Familiarity with data center design standards and best practices Proficiency in project tools such as AutoCAD, MS Project, or similar Excellent communication, documentation, and organizational skills Preferred: Certifications such as CDCP, DCDC, PMP, or equivalent Experience with hyperscale or colocation environments Working knowledge of commissioning processes and testing protocols Benefits: Competitive salary ($90-$105K) and performance bonus program 401k fully vested upon enrollment, up to a 4% employer match 100% employee premiums paid by employer for medical, dental, vision, life insurance, and disability Paid Time Off + Sick time Applications will be accepted on an ongoing basis. Prime is an Equal Opportunity Employer. All applicants are considered for employment without attention to race, color, age, religion, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender identity or expression, genetic information, ancestry, national origin, citizenship, protected veteran or military status, disability status, or any other classification protected by federal, state, or local laws and ordinances.

The R&D Engineer II is responsible for providing comprehensive engineering support throughout the lifecycle of medical device development projects. From initial design through to production, this role ensures adherence to established design controls, regulatory requirements, and industry standards. The R&D Engineer II collaborates cross-functionally with multidisciplinary teams to drive innovation, optimize product performance, and ensure compliance with relevant regulatory guidelines. Essential Duties and Responsibilities: · Lead and/or assist development of new medical device platforms complying with design control process including applicable FDA and ISO requirements. · Design, investigate, develop and qualify new manufacturing processes, fixtures and equipment. · Write test protocols and reports, conduct various testing, collect and analyze data and trends. · Perform sustaining, development, analysis, evaluation, testing and troubleshooting of finished devices, electrical systems (when applicable) and their respective components, sub-assemblies and test fixtures. · Train manufacturing/QC personnel as needed on test methods or manufacturing processes. · Execute test protocols and conduct bench testing. Document test results per GDP, ISO and FDA requirements. · Coordinate and oversee test sample builds. Assist with test sample builds as required. · Develop, qualify and update engineering documents such as manufacturing instructions, drawings, FMEA's and test methods. · Coordinate the design and fabrication of test fixtures, tooling and equipment. (if applicable) · Work with purchasing department to specify and procure capital equipment. · Serves as an external cross function team member for various project related activities as well as supporting R&D projects at group level participating in meetings and sharing technical information and "best-practices". · Assist or lead process improvement projects to reduce costs. · Complies with company policies and procedures. · Maintains project schedules while focusing on delivering products to support the R&D project pipeline. · Ensure that program objectives are determined and met, logistics are effectively coordinated and budgets are adhered to. · Actively searches for best-in-class technologies among competitors and develops innovation roadmap. · Maximizes product profitability and improve product performances. · Perform root cause analysis, propose and implement corrections and corrective actions. · Collaborate with the Production team to identify capabilities and capacity. · Support R&D Franchise goals through project or franchise leadership, define and lead system or process efficiencies, early-stage people management by mentoring and directing interns and or junior engineers. Supervisory Responsibilities: · Supervise and manage R&D Interns relating to project specific tasks. · Provide guidance and technical information for Interns. Education, Qualifications and Skills: · Bachelor's degree in engineering (or other related degree) with three years related engineering experience or a minimum of six years unrelated experience. · Ability to work in a fast paced, collaborative team environment. · Ability to understand CAD drawings. · Knowledge of Geometric Dimensioning and Tolerancing (GD&T). · Strong hands-on prototyping skills. · Ability to coordinate test sample builds. · Ability to write technical documents (procedures, test methods, protocols and reports). · Ability to execute protocols and conduct data analysis. · Ability to train manufacturing/QC/technicians. · Ability to work with little supervision. · Ability to use personal computers including software such as: Word, PowerPoint, Excel, and Minitab. · Self-starter and highly motivated. · Ability to have fun by motivating and encouraging other team members. Work Environment: · This job operates in a clerical, office, as well as a manufacturing setting. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. · While performing the duties of this job, the employee is frequently exposed to odors, fumes, dust or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud. · The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. · While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. · The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a R&D Engineer working out of our Bonded Logic Facility located in Chandler, AZ. Job Summary: We're seeking a forward-thinking R&D Engineer to help shape the future of sustainable building materials. In this role, you'll lead the development of advanced systems for processing and forming natural fiber batt insulation-materials like recycled denim and cotton-into high-performance, environmentally responsible products. You'll work at the intersection of material science, mechanical design, and process engineering to solve complex challenges in fiber handling, forming, and batt structure optimization. From lab-scale experimentation to full-scale manufacturing trials, your work will directly impact product performance, operational efficiency, and our Vision 2030 goals. This full-time role is expected to work according to the manufacturing plant scheduled hours, Monday through Friday. Much of the work will be hands-on in the manufacturing facilities. Up to 25% travel may be required based on project needs, training, offsite meetings, and conferences. Duties and Responsibilities: * Provide R&D support to the manufacturing team, scientists, plant engineers, and project managers to help enhance organic growth in the fiber insulation This includes: * Design and refine systems for separating, conditioning, and forming natural fibers into consistent, high-quality batts. * Develop new methods to improve fiber dispersion, weight uniformity, and thermal performance. * Explore novel forming technologies to enhance product structure and integrity. * Identify innovative materials compatible with the system to augment product performance. * Translate lab insights into scalable, plant-ready solutions. * Build and test prototypes, conduct pilot trials, and support implementation in manufacturing environments. * Collaborate with equipment vendors and research partners to accelerate development. * Develop project schedules, incorporating key tactical items for other functional Plans out in detail technical portions of all projects including operational pieces. * Present technical information to a non-technical audience, and effectively present complex or conflicting information. * Foster new product introductions and scale-up process from concept to commercialization. * Establish and maintain the quality program for fiber insulation. * Work in partnership with multiple functional areas (including manufacturing, purchasing and sales) to establish strategic plans and objectives materials and system solutions. * Interpret voice of the customer (VOC) and provide guidance on product development and troubleshooting. * Solve problems of diverse scope, including product/process development, product/process improvement, field issue resolution, manufacturing efficiencies, and outsourcing support. * Deliver design advances for product and process development. * Network internally and externally, to acquire information for projects and identify future opportunities. * Identify new opportunities to provide the basis for technical projects; includes Revolutionary and Evolutionary advances. * Operational and Supply Chain * Collaborate and lead cross-functionally to ensure that all facets of product development are accomplished smoothly. * Investigate and resolve product issues. * Utilize Phase-Gate process to manage R&D portfolio and mentor the use of appropriate project management tools. * Laboratory work including statistical data analysis, fabrication of prototypes and root cause investigation. * Conduct review meetings as necessary to ensure that the Product and Process Development priorities are aligned with those of management of the functional areas (Administration, Sales and Marketing, Operations, Logistics, Quality, EH&S, etc.) * Expectation to understand, participate in, and support company COS initiatives, with focus on developing a lean mindset. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Expert level proficiency in communication and leadership. * Ability to work at a high conceptual level providing novel approaches but can also dive into details to mentor staff/teams. * Employs a logical scientific approach to identify and initiate development projects. * Approaches problems in an analytical way. * Mechanical aptitude and the ability to understand and run various pieces of lab and manufacturing equipment. * Understanding of various construction practices. * Works well with others - utilizes all resources available to the fullest. * Ability to establish professional networks both within the company and with outside entities. * Ensures accurate and timely documentation of all work. * Provides leadership by example regarding safe work practices. * Completes assignments in a timely manner. * Strong organizational skills including sample management and storage. * Safe lab practices including chemical handing, sample preparation and use of all cutting tools and equipment. Education and Experience: * Required: * A Bachelor's degree in material science, mechanical engineering, industrial engineering, or chemical engineering. * Demonstrated ability to work across functional areas and business. * At least 5 years of firsthand experience in a technical role. * A proven record of initiating and managing innovation, and use of design to achieve results. * Expertise with maintenance, development, and project management techniques. * Hands-on experience with prototyping, pilot lines, or manufacturing equipment. * Knowledge of sustainable design principles and circular materials. * Preferred: * Master's or PhD in material science, mechanical engineering, industrial engineering, chemical engineering. * 5 or more years of experience in an R&D or Product Management capacity specific to natural fiber or other nonwoven building products. * 2 years of experience in a construction materials manufacturing support role. * Conceptual knowledge of residential and commercial building science. * Knowledge of building codes and regulations. Working Conditions: * The basic work environment is a combination of the manufacturing floor, office, and laboratory with an average of 1 week of travel per month (although more or less travel may be required based on business needs). The environment demands that multiple projects be worked on at the same time. Product evaluations will require travel to and working in manufacturing facilities and various jobsites in the field. BENEFITS AND PERKS Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. Benefits offered: * Medical, Dental, and Vision insurance- DAY 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement #LI-KS1

BOYD is looking for a Thermal Research and Design Engineer to join our Design Center team here in New Hampshire's Lakes Region. This region of NH offers many year-round outdoor activities such as hiking, skiing, fishing, boating, etc. In this position you will help our customers find and develop creative solutions to meet their challenging thermal and mechanical design requirements. BOYD's engineering team performs mechanical, thermal, industrial, electrical design and analysis as well as product development and prototyping services. Our global engineering team consists of 350+ engineers spanning a variety of fields and disciplines. Our clientele represent a wide spectrum of industries spanning from telecommunications, medical devices, server and data center, aerospace, power, consumer products and beyond. SUMMARY: * Conduct single and two-phase fluid flow and heat transfer research on both passive and actively pumped systems and apply those learnings to the development of new electronic cooling products. * Evaluate the most challenging electronics cooling applications with customers and propose highest performing design concepts using single and two-phase flow. * Conduct theoretical thermal and mechanical analyses, design sizing, and CFD/FEA simulations. Interpret and communicate results and recommend the best design approach. * Design and conduct heat transfer experiments, collect and reduce test data, analyze and interpret test results, communicate methods and results, adapt findings to improve design and CFD models, recommend design adjustments if needed. * Collaborate with colleagues and help solve multidisciplinary technical challenges. * Assisting with writing design proposals, marketing materials, and technical papers. * Select components and materials for cooling products and solutions. PRIMARY RESPONSIBILITIES: * Conduct thermal research, design, and engineering projects to support the company's business. * Prepare technical proposals to support soliciting funding for research in areas of interest to the Company. * Support building collaborative relationships between industry and academic partners to support research in areas of interest to the Company. EDUCATION AND EXPERIENCE REQUIRED: Education and Training * M.S. or Ph.D. in Mechanical Engineering or related fields, graduate level work in two-phase flow and heat transfer theoretical, experimental and computational methods. Strong foundation in other heat transfer modes like conduction, convection, and radiation. * Familiarity with research publications and literature in the above topical areas. * Hands on work in a heat transfer research or test lab. Experience * A strong understanding of the fundamental physics of heat transfer, mass transfer, and fluid flow including two-phase flow and heat transfer. * Familiarity with heat transfer experimental methods and instrumentation. * Familiarity with modeling and conducting CFD simulations preferably including two-phase flow and heat transfer. * Demonstrated initiative and independent problem-solving capabilities. * Ability to manage several projects at once and meet deadlines. * Excellent written and oral communication skills. * Exceptional organization, coordination, and consultation skills. Other * A knowledge of electronics cooling applications is desirable but not a requirement. * Working knowledge of SolidWorks is desirable but not a requirement. * Working with clients and experience in managing customer relationships is a plus. * Ability to work in a dynamic and fast-paced, flexible team environment. * Awareness of different manufacturing methods and limitations a plus. * US citizenship or permanent residency. All Job Posting Locations (Location) Laconia Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Join our innovative team in Tempe, AZ, where you will lead the development and optimization of cutting-edge manufacturing concepts, processes, and procedures for medical devices. We are looking for a highly skilled professional to drive the transfer of these innovations to manufacturing operations. Key Responsibilities Lead the innovation, development, and optimization of new manufacturing processes and procedures. Champion the use of Design for Reliability and Manufacturing (DRM) and data-driven methods through process development. Collaborate with process owners and product development teams to define robust process flows for new products. Work with technology development to understand and implement new process technologies. Own requirements flow down from product design to process development, ensuring efficient and cost-effective control strategies. Manage equipment scouting, selection, qualification, and characterization. Oversee process characterization and validation activities to ensure process maturity and stability. Lead risk assessments for process interfaces and interactions, providing input into product and process design. Apply statistical methods to design experiments and implement improvements. Coordinate and perform experiments and product builds to establish robust processes. Implement and manage yield monitoring systems and procedures for developed equipment and processes. Monitor, root cause, and resolve process yield issues during development. Lead corrective actions for yield issues in collaboration with process owners and product engineers. Review product development requirements for compatibility with processing methods and determine costs and schedules. Ensure processes and procedures comply with regulations and maintain documentation per quality system regulations. Must Have Experience with 10 laser welding systems. Background in medical device process development and manufacturing, with a focus on products with electrical functionality. Examples of critical thinking and use of statistics. Experience working in cross-functional teams and leveraging basic project management skills. Proficiency in scientific problem-solving methodologies. Attention to detail and accuracy to meet required standards. Top 3 Technical Skills Required Process development (characterization and validation -DOE, PCR, TMV, IQ, OQ, PQ). Statistics. Strong problem-solving skills. Education and Experience Required Advanced degree in Physics, Mechanical Engineering, Materials Science, Chemistry, Chemical Engineering, Biomedical Engineering, or a similar discipline. Minimum of 5 years of relevant experience. This position requires onsite work in Tempe, AZ, and offers the opportunity to be at the forefront of medical device innovation. If you are ready to make a significant impact and drive the development of life-saving technologies, apply now!

Are you looking for a unique opportunity to be a part of something great? Want to join a 17,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology Inc. People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip's nationally-recognized Leadership Passage Programs support career growth where we proudly enroll over a thousand people annually. We take pride in our commitment to employee development, values-based decision making, and strong sense of community, driven by our Vision, Mission, and 11 Guiding Values; we affectionately refer to it as the Aggregate System and it's won us countless awards for diversity and workplace excellence. Our company is built by dedicated team players who love to challenge the status quo; we did not achieve record revenue and over 30 years of quarterly profitability without a great team dedicated to empowering innovation. People like you. Visit our careers page to see what exciting opportunities and company perks await! Job Description: The Corporate Device Modeling and Technology Characterization Group within Microchip has a position for a Technical Staff Device Modeling and Measurement Engineer to join our team to help support the development of compact device models and characterize new technologies. This individual will perform characterization of electrical devices and develop models to closely replicate their behavior, for use in circuit design simulations. Leveraging the utilization of technologies through a resourceful understanding of device behaviors, to improve analog precision, reduce power consumption and reduce physical circuit size. This individual will work with circuit design engineers to solve simulation problems. This person will have opportunities to create their own test structures, mentor junior engineers, create and support code generation for measurement, document procedures and support troubleshooting throughout the device modeling process. Requirements/Qualifications: Education Level Required: Master's Degree 15+ years of experience Job Type: Full-time Career Level: Experienced (Non-Manager) Key Knowledge areas: - Fundamental device physics - Experience with Cadence layout tools and PDKs - Simulation with Hspice and Spectre - Use of MBP/MQA or ICCAP a plus - Use of coding languages (python, perl, java, labview) - Measurement of mosfets, BJTs, diodes, capacitors, etc with standard analyzer equipment. - Excellent communication skills Travel Time: 0% - 25% Physical Attributes: Feeling, Handling, Hearing, Reaching, Seeing, Talking, Works Alone, Works Around Others Physical Requirements: Normal business hours, 100% inside Pay Range: We offer a total compensation package that ranks among the best in the industry. It consists of competitive base pay, restricted stock units, and quarterly bonus payments. In addition to these components, our package includes health benefits that begin day one, retirement savings plans, and an industry leading ESPP program with a 2 year look back feature. Find more information about all our benefits at the link below: Benefits of working at Microchip The annual base salary range for this position, which could be performed in the US, is $91,000 - 232,000.* *Range is dependent on numerous factors including job location, skills and experience. Microchip Technology Inc is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. For more information on applicable equal employment regulations, please refer to the Know Your Rights: Workplace Discrimination is Illegal Poster. To all recruitment agencies: Microchip Technology Inc. does not accept unsolicited agency resumes. Please do not forward resumes to our recruiting team or other Microchip employees. Microchip is not responsible for any fees related to unsolicited resumes.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

An exciting opportunity to join a high growth business unit with expertise in device physics to support development of small signal and protection devices for industrial, automotive and wireless applications. As a Device Engineer located in Scottsdale, Arizona, you will have the opportunity to interact with cross-functional team of engineers in application, corporate R&D, foundry, product and marketing to develop and release-to-market industry-leading analog protection and small signal products. Master or higher in Electrical Engineering or related field with emphasis on semiconductor device physics and process fabrication Chip layout experience for protection devices is desirable Experience with TCAD process and device simulation tools is highly preferred Experience with 3D EM simulation and/or analog/RF circuit analysis tools is a plus Experience with JFET, MOSFET measurement techniques is a plus Knowledge of flip‐chip and wire‐bond packaging technologies is a plus A track record of innovation and publications is a plus Must have good communication skills and work ethic A track record of leadership skills and the ability to work with minimal supervision The successful candidate will have the opportunity to: Design, layout and verification of protection and small signal products to meet the specifications with device and circuit analysis tools Responsible for TCAD simulations to define new device design for new technology platform. Interface with internal and foundry technology teams for integration of process modules. Drive high quality and thorough design reviews including a playback to device targets. Collaborate with marketing, product engineering and project managers to surmount challenges and maintain development schedules Take joint responsibility for product-manufacturability and yield Participate in roadmap and strategy development. Participate in selecting fabs and assembly houses for process development through production. Excellent interpersonal and presentation skills. Possess initiative and motivation to work with cross-functional teams effectively.

The Principal Mechanical Engineer will develop next generation solar tracker products with emphasis on innovation. This position includes working with all levels of management, engineering, and other departments to create and select next generation technologies and products. This position is full-time and exempt. Location of this position is in Chandler, AZ. Key Job Responsibilities: Thought leader on mechanical engineering product improvements, technology vision, and roadmaps. Ensure that product evolution and innovation meet customer needs and remains ahead of market trends and competition. New product development owning parts and assemblies from concept through production implementation. Vetting product concepts for customer needs, ease of installation, business cases, manufacturability, reliability, and safety. Lead design review process and approve critical design decisions. Obtain components/supplies/equipment to support prototype assembly and conduct preliminary OEM vendor assessment/selection. Analyze different materials, techniques, manufacturing processes, design tolerances, and other factors in the developmental process. Manage fabrication and testing of new designs. Select the best product innovation and concept designs to bring into the product line. Provide technical leadership for key engineering projects. Provide regular updates to management. Work cross-functionally with other engineering teams and company departments to achieve company goals. Create and maintain necessary documentation for program success. Perform competitive analyses. Work with customer facing departments to ensure that customer feedback and experience is accounted for in product improvements. Mentor junior engineers. Qualifications: 10+ Years design experience designing electromechanical equipment with structural components, gearing, and/or drivetrains. Design skills such as FMEA, DFA, DFM, design for cost. Design experience using SolidWorks. FEA experience using SolidWorks Simulation or ANSYS. Direct experience in solar industry. Must be able to thoroughly and accurately document design intent, analysis results, test results, etc., in written form. Must have good organizational and time-management skills with the ability to work on multiple projects concurrently. Ability to effectively prioritize and execute tasks in a high-pressure environment. Must communicate effectively with engineers, drafters, and others within the company. Experience working in a matrixed environment, interfacing with high-level internal and external leadership. Experience defining and setting up tests to validate designs. Preferred qualifications: Master's degree in Mechanical Engineering. Professional Engineering Certification. Experience with structural components applied with civil engineering experience and wind loading. Experience with Stage Gate Product Development Processes At Array Tech, Inc., we strive to lead with our culture, and believe that our people are a key enabler of our future state. Our total rewards philosophy supports Array's ability to attract, develop, and retain our employees. We offer competitive compensation, benefits and wellness programs that align with the local markets where we do business. Array Tech, Inc. offers equal employment opportunity without regard to race, color, gender, age, creed, sex, religion, national origin, disability (physical or mental), marital status, citizenship, ancestry, sexual orientation, gender identity, and gender expression, or any other legally protected status. At Array Tech, Inc., we strive to lead with our culture, and believe that our people are a key enabler of our future state. Our total rewards philosophy supports Array's ability to attract, develop, and retain our employees. We offer competitive compensation, benefits and wellness programs that align with the local markets where we do business. Array Tech, Inc. offers equal employment opportunity without regard to race, color, gender, age, creed, sex, religion, national origin, disability (physical or mental), marital status, citizenship, ancestry, sexual orientation, gender identity, and gender expression, or any other legally protected status.