Research and development engineer jobs in Kenosha, WI - 802 jobs

Pride Health is seeking an R&D Lab Technician for one of the largest food and beverage companies in North America. Job Title: R&D Lab Technician Job Type: Contract Length: 11-Months (with potential to extend) Hours: 40 hours per week. M-Fri 8 AM to 4 PM (may vary depending on project needs) Pay Rate: $35.29 - $40.44 per hour Responsibilities: Sample preparation & analysis - Assembling samples of beverages and desserts including measuring with analytical balances, heating, mixing, cooling, filling into packaging, labeling, storage, diluting using pipettors, coordinating shipments, and logging samples into lab management system. Strong attention to detail is a must for this role. Shelf-life testing support - Sample preparation (locating, weighing up materials, dilution using pipettor, mixing, labeling), documenting test results, submitting testing requests, support clean up following testing. Regularly takes inventory and reports on sample condition and quantities. Inventory management of ingredients and chemicals - logging chemicals for disposal, ordering materials as needed, and ensuring all ingredients are put away at end of workday. Purchases in-market samples and supplies as needed. Support for pilot plant trials - Attending onsite trials to support mixing, labeling, packing, shipping samples and completing benchtop analytical testing including pH, titratable acidity, Brix, colorimetry, density. Must be able to safely lift anywhere from 5 to 50 lbs. of ingredients. Trials occur before 8 AM as needed, availability is required for these occasions. Lab Organization - Ensures lab environment is clean, organized, and in working order at the beginning of each work day. Responsible for weekly calibration of analytical balances, creating maintenance work orders, taking inventory, and conducting monthly safety checks. Specification management - Updating records for materials, formulas, and trade items to reflect accurate information; requesting cross-functional approvals and following up as needed. Graphics Reviews - Downloading and uploading reports and verifying graphics information (including nutrition facts panels, ingredient lines, product information such as net content) are a match to report. Data entry & analysis - Able to accurately log large data sets using Excel and provide high-level summaries (e.g., averages). Can convert between units of measurement, calculate averages, and scale up formulations when given target values. Must have experience with Microsoft Office suite including Excel, PowerPoint, Outlook, and Forms. Requirements: Minimum High School Diploma, prior experience in laboratory setting Excellent communication skills Strong computer proficiency Effective time management, adaptability across diverse teams, and keen attention to detail Demonstrated curiosity with a proactive approach to learning and asking questions Benefits that Pride Health offers: Pride Health offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. Apply Today! If you are interested in the position, please email your resume to **************************** for immediate consideration.

Itasca, IL Direct Hire $85-100K yrly 100% onsite We are seeking a creative and detail-oriented Mechanical Design Engineer to join our team, focused on developing innovative, high-efficiency equipment. Bring ideas to life by designing and developing advanced mechanical and process equipment from initial concept through full-scale production. You'll play a hands-on role in creating high-performance machinery built for reliability, efficiency, and long-term use in demanding production environments. A strong emphasis is placed on smart, clean, and maintainable design-ensuring systems are safe, durable, and easy to service. What You'll Do: Design and develop mechanical equipment and systems using SolidWorks, creating detailed 3D models and drawings with precise GD&T Perform engineering calculations and analyses to ensure performance in demanding operating environments Partner with engineers, manufacturing teams, and customers to optimize system design and performance Support prototype builds and oversee testing to validate throughput, consistency, and uptime Drive Design for Manufacturing (DFM) improvements to enhance build quality and reduce cost Create clear technical documentation, including BOMs, manuals, and specifications Ensure designs meet applicable safety, quality, and regulatory standards Troubleshoot field issues, perform root cause analysis, and implement continuous design improvements Why This Role Stands Out: End-to-end ownership-from concept to real-world impact Hands-on engineering with visible results Collaborative, problem-solving environment Opportunity to influence next-generation equipment design Technical Competencies Bachelor's degree in Mechanical Engineering or a closely related field. 3+ years of experience in mechanical design Proven proficiency in 3D CAD modeling and drafting If you enjoy solving complex challenges and building equipment that performs where it matters most, we'd love to connect.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Mechanical Design Engineer to join their team. This is a unique opportunity to work on cutting-edge projects in a collaborative, growth-oriented environment. Key Responsibilities: Design and develop mechanical and electromechanical assemblies for high-precision CNC equipment, including grinding and turning machines. Create detailed drawings for fabricated, machined, and sheet metal components using 3D CAD software (SolidWorks or Inventor preferred). Lead the design of castings, weldments, and high-precision machined parts, ensuring manufacturability and quality. Perform simulations and interference checks to validate design feasibility. Collaborate with cross-functional teams-including automation, manufacturing, and sales-to deliver innovative solutions. Support automation integration and provide engineering expertise to internal and external stakeholders. Contribute to the management of BOMs and design documentation within ERP and PDM systems. Apply principles of mechanics, thermodynamics, and fluid dynamics to evaluate and optimize system performance. Qualifications and Skills: Bachelor's degree in Mechanical Engineering. Minimum 5 years' experience designing complex mechanical and electromechanical assemblies, ideally for machine tools or related capital equipment. Background in the CNC machine tool industry. Familiarity with grinding and lathe technologies. Proficiency in 3D CAD (SolidWorks or Inventor strongly preferred). Demonstrated experience with castings, weldments, high-precision machined components, and sheet metal design. Strong understanding of manufacturing processes and materials. Excellent communication skills and ability to work effectively in a team environment. High level of professionalism and discretion in handling confidential information. Experience with JD Edwards ERP systems. Knowledge of fluids (pneumatics, hydraulics) and their applications in machinery. Compensation Range: $85,000 - $110,000 Benefits Offered: 3 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Mechanical Design Engineer looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Title: Senior Engineer, MEMS Characterization Department: MEMS Engineering SUMMARY DESCRIPTION: MEMS Characterization Senior Engineer will work with design, process, and failure analysis engineer on assisting characterization and failure analysis of the MEMS device, while supporting technology development, product qualifications and quality monitoring. Employee will maintain and develop new test solutions, recommend hardware requirements based on existing trends in characterization. Responsibilities Developing and maintain MEMS test solutions for production failure analysis, collaborating with design and process engineering to further characterization efforts and drive yield improvement Ensuring hardware and software installations are maintained. Continuous improvement of characterization capabilities collaborating with MEMS development team Perform microphone, MEMS, assembly failure analysis Work with design and process engineer to define characterization requirements and support execution of the characterization, including submitting work order requests and writing characterization reports. Qualifications Master of Science/Engineering in Electrical/Mechanical/Material/Physics (or related field) with 2-5 years' experience. PhD is a plus Experience in troubleshooting, debugging and with failure analysis of MEMS sensors is desired Familiar with material/device characterization using optical, electrical, mechanical methods Basic knowledge of acoustics and mechanics is an asset. Must be a team player with good communication skill. Familiar with material/device characterization using optical, electrical, mechanical methods Knowledge of calibration methodologies and best practices Basic knowledge of statistical analysis (JMP, MiniTab, R) is an asset Reliability testing experience is an asset Experience with electrical test equipment such as parameter analyzer, oscilloscope, probe station, and data acquisition system are desired Experience with advanced surface science methodologies (SEM, Raman, Auger, FIB, FTIR) an asset Hands on experience on developing environmental testing setup and fixtures for sensors under thermal, vibration, and electrical tests is a plus Solid foundation in MEMS microphone acoustics theory, including capacitive transduction principles (Experience analyzing thin-film residual stress, mechanical-electrical sensitivity optimization, damping resistance (Skvor's formula), and high-frequency response/SNR enhancement mechanisms) is a plus Proficient in finite element analysis (FEA) tools such as COMSOL Multiphysics or ANSYS for 3D MEMS microphone simulations is a plus Understand the principle of dynamic system modeling and proficient in Matlab Simulink and LTSpice is a plus COMPANY DESCRIPTION: Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at knowles.com EEO-M/F/D/V

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust The Staff Engineer - Alignment will travel to various PCA locations to support projects across the organization in both plants and papermills. The ideal candidate will have 2+ years of industrial experience, preferably in the paper/corrugated industry. This is a hands-on position, working side-by-side with the leaders, contractors, and personnel to drive projects to completion. It's an exciting opportunity for anyone that wants to make an impact on the organization, while working with the best team in the industry! Relocation is NOT required but ideal candidates must have reasonable access to reliable air transportation. The ideal candidate will have experience in an industrial setting focused on computer/digital/laser alignment. The primary responsibilities include alignment support for a range of projects, including new machine installation, machine survey work, troubleshooting and maintenance. This includes diligently recording all findings for reporting purposes, as well as reviewing historical documentation, and providing succinct and comprehensive reports for other members of the team. The Staff Engineer will use engineering acumen and best judgement when making decisions regarding alignment of machine components. Responsibilities: Provide technical support to the business and manufacturing operations. Evaluate, select, and apply standard engineering techniques, procedures and criteria using judgment in making minor adaptations and modifications. Provide project management support across the business when and where needed as projects arise. Make actionable recommendations based on sound engineering judgment. Must be able to generate drawings, specifications, and instructions necessary to convey project requirements to others. Dedication to ensuring a safe work environment. Ensure that safety/environmental requirements are adhered to on all project designs and that all projects receive adequate hazard reviews prior to installation. Responsible for managing safety during installation/implementation. Coordinates and supervises work scope with outside contractors and engineering groups on various sized projects. Write reports and give presentations based on analysis of information and written materials. Ability to organize, plan and work independently and as part of a team with minimal supervision. Perform other duties and responsibilities as assigned. Basic Qualifications: Experience in Alignment Services, Equipment Installation or Mechanical Construction as related to alignment and layout services. Ability to travel 80% of the time and can reside anywhere in lower 48 states with good access to reliable air transportation. 2 + years in an industrial paper and/or corrugating environment, design engineering environment, or construction services. Strong verbal and written communication skills and the ability to influence and persuade others; excellent organization and planning skills. Ability to work well with consulting engineers, local utility providers, and local authorities having jurisdiction. Experience using Microsoft Excel, Outlook, PowerPoint, Word, and Autocad (or similar). Education: Technical Degree or Certification or comparable experience, OR Associate or Bachelor's Degree COMPENSATION AND BENEFITS Starting salary range for position: $84,000 to $120,000 Bonus: Annual - Based upon individual contribution and overall, Company performance. Paid Vacation: Three (3) weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. Paid Holidays. Within the first 30 days of employment, an employee (and their dependents) is eligible to enroll in certain benefit coverages -- medical, dental, and vision - and are automatically enrolled in life, AD&D, and disability coverages. Upon hire, an employee is automatically enrolled in the 401k plan. The plan offers both pre-tax and Roth contribution options along with employer provided matching contributions. Disclaimer: The Compensation and Benefits information in this posting represents PCA's good faith and reasonable estimate of what it may pay for this position. The Company reserves the right to modify this information at any time, subject to applicable law. PCA is an Equal Opportunity Employer Qualified Applicants must apply at careers.packagingcorp.com to be considered. #LI-HS1

Project Engineer Join Vantage Specialty Chemicals as a Project Engineer and lead our Engineering team to improve production, quality, maintenance, and to effect cost reductions. While also seeking to drive excellence in production, quality, process troubleshooting and operations excellence, and contribute to our success in the chemical manufacturing industry. Position Scope This is an in-office position that works out of the Gurnee, IL manufacturing site that reports directly to our Engineering Director. Essential Duties and Responsibilities This position is very much one of being a working supervisor. While supervising contracted personnel, both professional and hands-on, the individual is expected to maintain a sizable project load. Direct or oversight responsibility for many of the capital projects undertaken at Vantage Oleochemicals. The normal flow of events in a project may include: completion of project design and developing a firm cost estimate, firm project design and a commitment on equipment, developing bid packages and going to contractors for bids on equipment and installation, coordinating and checking the actual construction, start-up and modifications of finished equipment and an Advice of Physical Completion for the project, and recommending routing maintenance, spare parts, listing necessary information and a financial closing (over or under estimate and why). May act as a Field Construction Manager or, in some cases, the Commissioning Manager. In the area of technical assistance, the incumbent investigates problems of a production, maintenance or technical nature, such as equipment failure or a process bottleneck. Problem Solving: Study existing situations (equipment, processes, manufacturing procedures, etc.), considering possible improvements or modifications, and preparing reports complete with conclusions and recommendations as a result of studies. Incumbent plans or assist in planning the approach to projects or segments of projects assigned by supervisor and for plant turnarounds. When assigned complete responsibility for small projects, supervises and participates in all aspects of the projects from inception to start-up (designs, estimates, calculations, test runs, etc.) and resolves all problems encountered. Works routinely with other department heads and managers to assist in formulation of Vantage Oleochemicals' capital plan and refines proposals for submittal. Accountability: While reporting directly to the Engineering Manager, there remains a strong dotted line to the site manager and his staff. Actions taken and plans developed must be formulated with an eye to the site manager being the real customer. Responsible for assisting in the development of technical improvements in equipment, processes, manufacturing procedures, etc. Directly affects profits by assisting in trouble-shooting equipment and/or process malfunctions and thereby restoring the plant to maximum operating efficiency. Responsible for adherence to safety and health rules & regulations. Financial Responsibility: Plays a major role in executing the Capital budget of approximately $10 Million per annum. Annually supervises or participates in 10-12 small ($25,000 or less) construction projects from inception to start-up. Annually manages 1 or 2 major ($.5MM and up) projects, assuming total responsibility for cost, scope, and technical success. Education & Experience: Education: Bachelors degree in Mechanical Engineering is required. Experience: Minimum 5 to 10 years of engineering experience. Supervisory experience with small groups desirable. Well-developed human relations and communications skills. Experience in the chemical industry or other process plants, with related technologies is strongly preferred. Knowledge, Skills, & Talents Key responsibilities: Perform all or segments of the necessary engineering work on assigned studies and projects to modify equipment and processes to increase output, reduce costs, eliminate safety hazards, and/or improve product quality. (60%) Lead Vantage Gurnee efforts to implement procedures and practices to comply with aspects of the companies Engineering Procedures. (25%) Conceive and recommend projects for improvement of existing practices and conditions to increase output, reduce costs, improve working conditions, eliminate safety hazards, and/or improve product quality. (15%) Pay The estimated base pay range for this position is: $96k - $144k annually. Actual pay will be determined based on education, certifications, experience, qualifications, skills and geographic location. This position is eligible to participate in a short-term incentive program. Benefits Vantage offers a comprehensive benefits package to eligible employees, including: Medical, HSA, dental, vision FSA (limited purpose, dependent care, and commuter/parking) Life and AD&D insurance Accident, hospital indemnity and critical illness insurance Short- and long-term disability EAP, identity theft protection Paid time off, Parental Leave 401(k) with company match Short- and long-term disability Equal Employment Opportunity Vantage is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other protected category. About Vantage Vantage provides natural solutions to our customers' technical performance and marketing needs through a unique combination of chemistry, application expertise and service. Underpinned by our broad portfolio of formulations, ingredients and actives that are built on a backbone of sustainable oils, fats and their derivatives, Vantage targets selected markets and applications including personal care, food, surface treatment, agriculture, pharma, and consumer and industrial performance. Vantage is headquartered in Deerfield, IL., operates in 11 countries worldwide and employs more than 1,000 talented professionals focused on delivering exceptional customer experiences with every interaction. We are a dynamic people-centered organization where you'll be part of a collaborative global team. Embracing our cultural diversity, we learn from each other to constantly improve, adapt and iterate. We value the voices and talents of our colleagues, empowering them to drive their unique ideas to completion. We're convinced that exceptionally motivated employees produce outstanding results, and we celebrate them by fostering a culture of recognition, development, learning, excellence and shared achievement. Most importantly, we know you're going to like it here. For more information visit: vantagegrp.com or LinkedIn/vantage.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description • The primary responsibility is in plastic co-injection molding process and polymer melt extrusion process, and their mold/tool design to support for existing and new and pipeline device delivery for device-drug combination products. • Major responsibility in device plastic molding, co-injection molding and co-extrusion processes with the design of mold/tool from the small scale to the large scale of commercial production by utilizing GMP and ISO standards, and also testing for high volume productions to support biopharmaceutical products. • Partnering with third party manufacturing (TPM) from the small-scale molding with mold/tool design to scale up for the commercial production in the co-injection/co-extrusion and their mold/tool design for scale up for commercial applications. Major Responsibilities: • Responsible for medical device part co-injection and co-extrusion processes, and their mold/tool design and scientific molding to support processing optimization for high volume injection and extrusion processes • Responsible for the molding/extrusion process, polymer material and equipment integration to develop process and broaden the process space of co-injection and co-extrusion processes • Responsible to partner with TPM to design mold/tool and molding/extrusion process with the selected materials and injection and co-injection molding machine for process optimization • Responsible to work with design engineers to design and develop the part design and conduct the molding trials to optimize the part design, mold/tool design and molding and co-injection process through quality by design to meet the functionality and manufacturability requirements Skills Requirements • Experience in part molding in co-injection and co-extrusion processes with scientific molding approach to broaden the process space to meet part dimension specs and tolerance ranges • Experience in Moldflow analysis software and with polymer material properties to assess and predict the part quality in terms of part dimension, warpage, and built stress mitigation to optimized the part quality • Hand-on experience in co-injection and co-extrusion processes and in partnership with TPM for the part develop and manufacture for multiple layers of co-injection and co-extrusion parts • Hand-on experience in both melt extrusion and injection molding is preferred • Experience in polymer, plasticized polymer and thermoplastic elastomer (TPE) co-injection and melt extrusion and their mold/tool design and development for scale up to commercial production • Experience in system integration of design, materials, process, equipment and assembly for medical device and experience in device functionality testing of components and assembly • Experience in partnering with third party manufacturing for production to develop the mold/tool and their design trials for part functionality and manufacturability applications. Qualifications BS with preferred 5-10 years of experience; Or MS with preferred 3-10 years of experience; Or Ph.D. with preferred 2-8 years of experience in Molding/Extrusion Engineering, Manufacturing Engineering, Material Engineering, Mechanical Engineering, Biomechanical Engineering, or Biomedical Engineering. Additional Information All your information will be kept confidential according to EEO guidelines.

Full-time Description About Us: At Cozzini LLC, we are at the forefront of capital equipment manufacturing, specializing in innovative solutions for the protein processing industry. Our commitment to quality and sustainability drives us to create state-of-the-art equipment that enhances production efficiency and product quality. We are seeking a talented R&D Engineer to join our dynamic team and contribute to our mission of excellence. Position Overview: As an R&D Engineer you will play a key role in the design, development, and optimization of new technologies and equipment in protein processing. Your expertise will help us innovate and improve our product offerings, ensuring we meet the evolving needs of our customers in the protein processing sector. Conduct research to identify trends and advancements in protein processing technologies. Collaborate with cross-functional teams, including manufacturing, quality assurance, and marketing, to bring products from concept to market. Utilize your experience and knowledge in areas such as: Servo design, Motion design, Electrical design, Control design, Automation, Belt conveyor design, Pumping systems, Patents, Metric and US standards, Performance Level safety, OSHA safety, CE certification, Risk assessments, Low voltage AC motors, NEAM and IP ratings, Welding and Fabrication, Machining, Sanitary design, Vacuum systems, Meat grinding, Meat mixing, Stainless steel design, Platform design Perform testing and validation of prototypes, analyzing performance and making necessary improvements. Document findings and prepare technical reports and presentations for internal and external stakeholders. Support the troubleshooting and optimization of existing equipment, providing technical expertise to resolve issues. Stay updated on industry trends, competitor products, and regulatory changes impacting the protein processing sector. Benefits: Health insurance Health Savings Account w/ ER contribution Flexible Spending Account w/ ER contribution Dental Insurance Company Paid Disability Insurance Employee Assistance Program Company Paid Life insurance Paid holidays Paid time off 401k Vision insurance Cozzini, LLC is an Equal Employment Opportunity (EOE/M/F/Vets/Disabled) employer and welcomes all qualified applicants. Principals only, please no third parties. Requirements Bachelor's degree in Electrical Engineering, 3+ years of experience in R&D engineering, preferably in food processing or capital equipment. Strong knowledge of food processing systems, particularly in the protein sector, a plus. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for equipment design and modeling. Working Knowledge of at many of the knowledge areas specified in the position overview. Familiarity with food safety regulations and standards (e.g., USDA, FDA). Excellent analytical and problem-solving skills. Strong communication and teamwork abilities to collaborate effectively with diverse teams. Experience having previously developed or worked on patents a plus. Willingness to travel for equipment installations and customer support as needed. Salary Description $80k to 115K

This position is under the direction of the R&D Director for the Thermoformed Packaging division that includes developing, designing, and qualifying new thermoplastic materials and processes for TOPPAN's end use markets. The individual will be instrumental in identifying sustainable packaging solutions for our customers by taking ideas and technical understanding of new polymer technologies to manage and execute key projects from development to commercialization. The candidate must be an expert in the area of plastics extrusion and thermoforming and material handling with a solid understanding of the thermal, mechanical and rheological properties of thermoplastics. The individual will identify growth opportunities for the business and drive projects to increase productivity, capacity, and efficiency across our manufacturing plants. What you'll be doing: Be a subject matter expert in processing of plastic materials for consumer packaging Provide expertise and recommendations on manufacturing equipment needed to support the current business and enable capability for future growth Address internal and external customer needs and packaging opportunities in a manufacturing setting Manage the technical integration of projects through collaboration with internal cross-functional teams, suppliers, and equipment manufacturers to solve complex problems to enhance product performance for TOPPAN's customers in a timely and cost-effective manner Originate new ideas to support the R&D product innovation and technology strategy Establish an environment which motivates and engages others in the R&D organization to achieve desired results Foster a positive, safe work environment through open communication and an atmosphere of teamwork Ensure compliance with company safety policies and procedures to protect all employees Up to 40% travel, mostly domestic This position is located at Franklin Park, IL and 100% onsite We'd love to hear from you if: B.S./M.S. in Mechanical Engineering, Plastics Engineering, Chemical Engineering, or Polymer Science 7+ years of related experience with a strong technical background in plastics manufacturing, processing (i.e., extrusion, thermoforming, and tooling); experience in consumer-based food packaging is a plus Experience working in a manufacturing environment with proven results leading capital projects working with OEMs and suppliers Working knowledge in processing PET, PP, HIPS, and PE resins and formula additives; experience applying coatings and lamination to rigid sheet a plus Results driven with a high level of personal initiative, energy, and ownership for success Inquisitive mind, actively staying aware of new and developing technologies inside and outside of the industry Self-starter with a positive “can do” attitude and able to work independently Experience leading projects working across different functions in the organization (e.g., commercial, manufacturing, supply management) Strong technical capability & problem-solving skills Effective communication skills both written and verbal Ability to work in a fast-paced, results orientated environment Highly organized and self-motivated with a hands-on work ethic

Experience: 8+ Years What candidate will Be Doing: Perform development and verification for avionics products like Display, Air-Ground communication systems. High level requirements, Low Level Requirements creation, development and review. Perform HW/SW integration testing compliance to DO 178B/C. unit testing Agile mode execution, align and participate in Review process. Co-ordination with cross functional team Design, analyze, and develop product solutions using established programming languages, tools, and security baselines. Enhance and maintain development and testing frameworks to ensure reusability, scalability, stability, and optimal performance. Prepare and execute comprehensive test plans; develop automated and manual test scripts to validate new features and improve existing products. Conduct reviews in alignment with standards and perform analysis; troubleshoot and resolve product issues of moderate complexity. Document technical deliverables throughout the project lifecycle, including specifications, design documents, code comments, test cases, test reports, and release notes. Collaborate with other technical leads to develop unit test; ensure thorough documentation. Provide guidance and support to junior team members, fostering technical growth and collaboration. What We Are Looking For: Requires in-depth knowledge and experience Solves complex problems; takes a new perspective using existing solutions Works independently; receives minimal guidance Acts as a resource for colleagues with less experience Represents the level at which career may stabilize for many years or even until retirement Contributes to process improvements Typically resolves problems using existing solutions Provides informal guidance to junior staff Works with minimal guidance Experience / Education Typically requires 5-7 years of related experience with a 4 year degree; or 3 years and an advanced degree; or equivalent work experience. Work Arrangement Fully On-Site: Must be able to travel to an Arrow Client office location as requested by Arrow Client leadership. Location: US-WI-Oak Creek-Wisconsin What's In It for You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's whywe offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance 401k, With Matching Contributions Short-Term/Long-Term Disability Insurance Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Paid Time Off (including sick, holiday, vacation, etc.) Tuition Reimbursement Growth Opportunities And more! About eInfochips: eInfochips, an Arrow company (Fortune #154), is a leading global provider of product engineering and semiconductor design services. A rich history of over two decades, with over 500+ products developed and 40M deployments in 140 countries, eInfochips continues to fuel technological innovations in multiple verticals. eInfochips has strategic technology partnerships with Qualcomm, NVIDIA, NXP, Analog Devices, Texas Instruments, Amazon, Microsoft and Google to name a few. Along with Arrow's $38B in revenues, 22,000 employees, and 345 locations serving over 80 countries, eInfochips is primed to accelerate connected products innovation for 150,000+ global clients. eInfochips acts as a catalyst to Arrow's Sensor-to-Sunset initiative and offers complete edge-to cloud capabilities for its clients. Please visit ****************** for our portfolio of product engineering services across various industries & verticals. EEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) Annual Hiring Range/Hourly Rate: $ 120,000.00 - $128,710.00 Location:US-WI-Oak Creek-Wisconsin (Astronautics) Time Type:Full time Job Category:Engineering ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

About Us: At Cozzini LLC, we are at the forefront of capital equipment manufacturing, specializing in innovative solutions for the protein processing industry. Our commitment to quality and sustainability drives us to create state-of-the-art equipment that enhances production efficiency and product quality. We are seeking a talented R&D Engineer to join our dynamic team and contribute to our mission of excellence. Position Overview: As an R&D Engineer you will play a key role in the design, development, and optimization of new technologies and equipment in protein processing. Your expertise will help us innovate and improve our product offerings, ensuring we meet the evolving needs of our customers in the protein processing sector. * Conduct research to identify trends and advancements in protein processing technologies. * Collaborate with cross-functional teams, including manufacturing, quality assurance, and marketing, to bring products from concept to market. * Utilize your experience and knowledge in areas such as: Servo design, Motion design, Electrical design, Control design, Automation, Belt conveyor design, Pumping systems, Patents, Metric and US standards, Performance Level safety, OSHA safety, CE certification, Risk assessments, Low voltage AC motors, NEAM and IP ratings, Welding and Fabrication, Machining, Sanitary design, Vacuum systems, Meat grinding, Meat mixing, Stainless steel design, Platform design * Perform testing and validation of prototypes, analyzing performance and making necessary improvements. * Document findings and prepare technical reports and presentations for internal and external stakeholders. * Support the troubleshooting and optimization of existing equipment, providing technical expertise to resolve issues. * Stay updated on industry trends, competitor products, and regulatory changes impacting the protein processing sector. Benefits: * Health insurance * Health Savings Account w/ ER contribution * Flexible Spending Account w/ ER contribution * Dental Insurance * Company Paid Disability Insurance * Employee Assistance Program * Company Paid Life insurance * Paid holidays * Paid time off * 401k * Vision insurance Cozzini, LLC is an Equal Employment Opportunity (EOE/M/F/Vets/Disabled) employer and welcomes all qualified applicants. Principals only, please no third parties. * Bachelor's degree in Electrical Engineering, * 3+ years of experience in R&D engineering, preferably in food processing or capital equipment. * Strong knowledge of food processing systems, particularly in the protein sector, a plus. * Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for equipment design and modeling. * Working Knowledge of at many of the knowledge areas specified in the position overview. * Familiarity with food safety regulations and standards (e.g., USDA, FDA). * Excellent analytical and problem-solving skills. * Strong communication and teamwork abilities to collaborate effectively with diverse teams. * Experience having previously developed or worked on patents a plus. * Willingness to travel for equipment installations and customer support as needed.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. 1 year of relevant work experience. Preferred Qualifications Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. Ability to formulate program strategy, budgets and timelines. Solidworks and/or AutoCAD. Six Sigma Methodologies. Statistical Analysis. Strong technical and problem-solving skills. Ability to communicate and write effectively. Benefits: Comprehensive Medical, Dental, and Vision plans 20 days of Paid Time Off 15 paid holidays Paid Sick Leave Paid Parental Leave 401(k) Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do * Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. * Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. * Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. * Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements * Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. * 1 year of relevant work experience. Preferred Qualifications * Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. * 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills * Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. * Ability to formulate program strategy, budgets and timelines. * Solidworks and/or AutoCAD. * Six Sigma Methodologies. * Statistical Analysis. * Strong technical and problem-solving skills. * Ability to communicate and write effectively. Benefits: * Comprehensive Medical, Dental, and Vision plans * 20 days of Paid Time Off * 15 paid holidays * Paid Sick Leave * Paid Parental Leave * 401(k) * Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

Job Summary The Manufacturing Engineer will play a key role in developing and sustaining production processes, equipment, and workflows that ensure components, subassemblies, and final products are manufactured safely, consistently, and in compliance with specifications and regulations. This role has architectural and system-level responsibility for the Manufacturing Execution System (MES), ensuring process traceability, conformance, and integration with Quality and Product Lifecycle Management (PLM) systems. The Manufacturing Engineer will also lead cross-functional initiatives with Product Engineering, Quality, Procurement, Operations, and Production to drive product conformity, efficiency, and continuous improvement. Essential Duties & Responsibilities An individual in this position must be able to successfully perform the following duties. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. Other duties may be assigned. Develop, implement, and train staff in safe, reliable, and ergonomic production processes, workflows, and equipment. Create and maintain assembly and manufacturing instructions within the MES to enable post-production audit confirmation where required. Design, implement, and sustain tooling and fixturing to ensure accurate, repeatable, and efficient production. Oversee tooling, fixturing, and test equipment documentation, identification, calibration, and maintenance requirements. Design production work cells using lean manufacturing principles (5S, poke yoke, visual factory, kanban) to create an efficient and intuitive environment. Provide primary oversight of the MES, ensuring full alignment with QMS and PLM requirements. Support calibration, preventative maintenance, and scalability planning for production systems and equipment. Identify and resolve process constraints in collaboration with production and engineering teams. Partner with operators and technicians to understand process concerns, prioritize improvements, and implement effective solutions. Lead and support internal and external product/process audits. Facilitate brainstorming and cross-departmental collaboration to ensure cohesive, effective manufacturing solutions. Qualifications Required: Bachelor's degree in manufacturing, Industrial, or related engineering field, OR 7+ years of equivalent experience. 5+ years of experience in a regulated manufacturing environment. Demonstrated ability to lead cross-functional projects to successful outcomes. Experience training and mentoring junior engineers and assembly technicians. Strong organizational, analytical, and communication skills. Proficiency in 3D CAD. Experience implementing and supporting MES systems. Familiarity with FAA or other highly regulated manufacturing requirements. Proficiency in Microsoft Office programs. Preferred: Proficiency with SolidWorks and PDM systems. ERP experience (Infor CloudSuite Industrial or similar). Experience with external machining, tooling, and automation vendors. Knowledge of Epicor eFlex MES and/or MQTT Protocol. Working Conditions Work will be performed in both office and aerospace production environments with PPE required as designated. This role requires mobility on the shop floor, including kneeling, squatting, and bending to evaluate processes and equipment. Occasional lifting of up to 40 lbs. from floor to bench height may be required. DeltaHawk Engines, Inc. is an equal employment opportunity employer, and all qualified applicants will receive consideration or employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, or any other characteristic protected by law. PI5e7f61b08663-31181-38537683

Dynamic Manufacturing is seeking a Manufacturing Engineer to join our growing team! The Manufacturing Engineer is responsible for all processes, continuous improvements, tooling, and manufacturing and plant layouts. As a Manufacturing Engineer, you will oversee one or more product lines or facilities, with the responsibility for optimizing manufacturing processes, enhancing production efficiency, and ensuring product quality. You will collaborate with cross-functional teams to drive and implement process development and improvements, troubleshoot manufacturing issues, and support and/or lead new product launches. At Dynamic Manufacturing, we offer: An Engaging Work Environment Opportunities for Advancement Tuition Reimbursement Competitive Pay (we pay weekly!) Comprehensive Benefits Package & 401(k) Match Generous Paid Time Off, and more! RESPONSIBILITIES: Process Development Project Management - ensuring completion from start to finish Supports and/or leads product launch activities Review engineering specifications, process flows, and other information to understand methods and activities in manufacturing and services Define how to manufacture parts or products, or deliver services, with maximum efficiency Develop quality control procedures to resolve production problems or minimize costs Work with customers and management to develop standards for design and production Confer with clients concerning product specifications, vendors about purchases, management personnel about manufacturing capabilities, and staff about the status of projects Develop, recommend, and implement initiatives to improve production metrics and financial performance Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements Completes design and development projects by training and guiding technicians QUALIFICATIONS: This position is open to individuals who have worked as a direct employee in a manufacturing site. Bachelor's degree in Industrial or Manufacturing Engineering or a related field strongly preferred and/or at least 5 years of engineering-related experience in an assembly manufacturing environment Proficiency in CAD software (Solidworks, AutoCAD, Inventor, etc.) Knowledge of lean manufacturing and experience with identifying and leading lean continuous improvement events Experience with automation development and implementation Knowledge and preferred experience with additive manufacturing technologies and processes Familiarity with industry standard equipment Familiar with Automotive Industry standards and requirements, i.e. IATF 16949 Strong problem-solving, analytical, and project management skills Adequate knowledge of business and management principles (budgeting, strategic planning, resource allocation, and human resources) Be knowledgeable of safety, quality, productivity, demand creation, inventory, and stewardship processes Strong oral and written communication skills, able to provide clear, concise information to customers, internal teams, and management Able to collaborate and lead effectively with cross-functional teams WHY CHOOSE DYNAMIC? Dynamic Manufacturing is a family owned and operated organization formed in 1955 by John Partipilo. Our organization specializes in the manufacture of automotive, off-road, industrial and racing powertrain products. This includes Torque Converters, Transmissions (Automatic, Manual, Hybrid models) and Transfer Case Assemblies. Our organization started with a single retail facility and a dream. Today, we serve the aftermarket and several OE customers. Our operations consist of almost a million square feet of floor space and 1,000+ extremely talented employees encompassing turnkey operations from engineering, total machining operations, through assembly and dynamometer testing. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Job Title: Acousto Optic Engineer Company: IntraAction Corp. (IntraAction.com) Company Overview: IntraAction Corp, a 45-year-old company under new ownership, specializes in the design and manufacture of cutting-edge acousto-optic modulators and deflectors. Our commitment to innovation and quality has made us a leading player in the optical technology industry. As we continue to expand and innovate, we are seeking a dedicated Optical Sales Engineer to join our dynamic team. Job Overview: As an AO Engineer at IntraAction Corp, you will be responsible for engaging with customers, selling our high-quality acousto-optic products, and providing technical expertise in the field of acousto-optic modulators and deflectors. You will play a crucial role in representing our brand, expanding our customer base, and contributing to the growth and success of our company. Key Responsibilities: Customer Engagement: Build and maintain strong relationships with customers, understand their needs, and provide technical assistance and guidance on product selection. Product Design: Collaborate with customers to design customized acousto-optic modulators and deflectors based on their specific requirements and applications. Product Suggestions: Continuously gather market insights and feedback to suggest new product ideas and improvements to our existing product range. Trade Shows: Represent IntraAction Corp. at industry trade shows, conferences, and exhibitions. Demonstrate our products, engage with potential clients, and generate leads. Qualifications: Bachelor's degree in AO Engineering, Physics, or a related field. REQUIRED!!! Proven experience Physics Excellent communication and interpersonal skills. Willingness to travel to trade shows and customer sites. Ability to work independently and as part of a team. Strong problem-solving skills and a customer-centric mindset. Benefits: Competitive salary commensurate with experience. 401K retirement plan. Health insurance coverage. Paid sick, holiday, and vacation time off. Opportunities for professional growth and development. Collaborative and dynamic work environment. IntraAction Corp is committed to fostering a diverse and inclusive work environment and encourages candidates from all backgrounds to apply. If you are passionate about optical technology, enjoy engaging with customers, and want to be part of an innovative team in a growing company, we invite you to apply for the position of Optical Sales Engineer at IntraAction Corp.

We are seeking a Mechanical Design Engineer to support the design and engineering of enclosure systems within a rapidly growing product division. This role is heavily focused on mechanical design, layout, and product development, working closely with cross-functional teams to deliver high-quality enclosure solutions for industrial and facility-based applications. This is an excellent opportunity for entry-level engineers looking to grow, as well as experienced designers seeking to work in a high-growth product line. Key Responsibilities Design and develop enclosure systems with a focus on mechanical and structural integrity Create layouts, drawings, and detailed designs using SolidWorks and AutoCAD Support product development from concept through release Collaborate with engineering, manufacturing, and project teams to ensure designs meet functional and quality requirements Apply engineering principles to industrial products and facility-related enclosure applications Revise and update designs based on feedback, manufacturing needs, and customer requirements Maintain accurate design documentation and engineering files Qualifications Bachelor's degree in Mechanical Engineering, Architecture, or a related technical discipline (or equivalent experience) Strong interest or background in mechanical design and product development Experience with SolidWorks and/or AutoCAD (academic or professional) Ability to interpret basic engineering and architectural drawings Strong attention to detail and problem-solving skills

Staff Engineer II - Innovate, Lead, and Drive Operational Excellence As a Staff Engineer II, you'll be the technical expert, leading initiatives and projects that improve manufacturing processes, reduce costs, and enhance quality. You'll design and implement optimal, cost-effective solutions, and champion transformation efforts through hands-on leadership and collaboration. About PCA PCA is the third-largest manufacturer of containerboard and corrugated packaging in the U.S. We're more than a packaging company-we're an ideas and solutions partner. Our culture thrives on innovation, sustainability, and continuous improvement. With three dynamic business units-Containerboard, White Paper, and Corrugated Plants-we produce billions of square feet of corrugated products annually, backed by a commitment to quality and growth. Responsibilities: Provide technical support to the business and manufacturing operations. Evaluate, select, and apply standard engineering techniques, procedures and criteria using judgment in making minor adaptations and modifications. Provide project management support across the business when and where needed as projects arise. Involved in developing business and/or capital plans. Make actionable recommendations based on sound engineering judgment. Manage multiple capital and maintenance projects, including initial planning, design, documenting, budgeting, implementation, and troubleshooting. Must be able to generate drawings, specifications, and instructions necessary to convey project requirements to others. Dedication to ensuring a safe work environment. Ensure that safety/environmental requirements are adhered to on all project designs and that all projects receive adequate hazard reviews prior to installation. Responsible for managing safety during installation/implementation. Coordinates and supervises work scope with outside contractors and engineering groups on various sized projects. Maintain projects on budget and on schedule. Write reports and give presentations based on analysis of information and written materials. Ability to organize, plan and work independently and as part of a team with minimal supervision. Perform other duties and responsibilities as assigned. Basic Qualifications: Bachelor's degree in mechanical engineering or mechanical engineering technology from an accredited college or university. Other degrees considered with substantial experience. Ability to travel 80% of the time and can reside anywhere in lower 48 states with good access to reliable air transportation. 5 + years in an industrial paper and/or corrugating environment or design engineering environment. Strong verbal and written communication skills and the ability to influence and persuade others. Excellent organization and planning skills. Ability to work well with consulting engineers, local utility providers, and local authorities having jurisdiction. Experience using Microsoft Excel, Outlook, PowerPoint, Word, and AutoCAD (or similar).

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Responsibilities Include: • Provide technical expertise and apply advanced scientific knowledge and product design best practices to projects; determine design requirements and contribute to verification and validation plans including execution. • Responsible for timely project completion. • Participate in project planning, design reviews and risk assessments using formal risk analysis methodologies. • Evaluate and integrate relevant engineering advances for improving or solving problems • Understand the business implications of assigned products and processes and identifies engineering solutions compatible with business needs. • Apply advanced technical writing skills to produce reports and documents; writes independently and evaluates the writing of others. • Present results of projects. Qualifications Possesses educational qualifications and work experience as established by engineering schools, employers and licensing authorities for employment in the various disciplines of engineering, i.e. Mechanical, Electrical, Industrial, Manufacturing, Chemical etc. Experience level: 5-7 years. Additional Information All your information will be kept confidential according to EEO guidelines.