Research and development engineer jobs in Pensacola, FL - 55 jobs

Act as a change agent using the Toyota Production System Lean methodology to support the plant continuous improvement Journey. Perform continuous improvement and Kaizen events to eliminate waste, improve efficiency, and boost quality in the manufacturing process and product by applying the Lean principles and tools such as: 5S, Daily & Visual Management, Operators standard work, material flow and Just in Time (JIT). Partnership with Advanced Manufacturing engineers to bring innovation and automation to the process. Focus on creating flow, reducing lead times, and ensuring safety and ergonomics through standardized work and root cause analysis, often collaborating across engineering, production, and quality **Job Description** **Roles and Responsibilities** + Responsible for plan, facilitate, execute or lead full week Kaizen events to improve the Safety, Quality, Delivery Productivity and Cost across the production lines and warehouse. + Responsible to support the waste elimination and 5S programs across the shop floor. + Responsible to develop, implement and update the operators standard work, including the cycle time study, line balance and demand level load. + Support the team leaders to define, implement and sustain the daily management and assembly lines operational rhythm. + Responsible to define, implement and coach the teams to sustain the visual management at the production lines. + Responsible to prepare and update the Value Stream Maps (VSM). + Perform 3P (Production Preparation Process) Kaizen events to design new assembly lines or improve the existing ones. + Teach, train, coach, and mentor front line leaders and operators in the basic LEAN principles and tools. + Share best practices across the areas and act as a conduit to accelerate improvements. + Work closely with operations and advance manufacturing engineer teams to drive innovation and automation to the manufacturing processes. **Required Qualifications** + Engineer degree from an accredited university or college. + Minimum of 3 years of demonstrated experience as Lean engineer or Lean specialist applying the classical TPS (Toyota Production System) Lean methodology and approach. + Lean Manufacturing - with proven experience leading or facilitating a Kaizen full week event based on the Toyota Production System methodology. **Desired Characteristics** + Strong oral and written communication skills. + Demonstrated ability to analyze and resolve problems. + Demonstrated ability to lead programs / projects. + Attended a Shingijutsu Kaizen event. + Six Sigma Green Belt degree. + Working an automated production environment with a continuous assembly moving lines. GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes For candidates applying to a U.S. based position, the pay range for this position is between $81,700.00 and $136,700.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: ineligible. This posting is expected to remain open for at least seven days after it was posted on January 16, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Title: Mechanical Engineer - Tyndall AFB ***Work Location: Panama City, FL *** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities : Candidate will provide engineering services on several simultaneous federal projects ranging in value up from tens of millions to hundreds of millions of dollars in construction value. Experience with large Federal Building Design, Medical Building Design and/or Construction Projects, or other similarly complex projects is desired. For this requirement, “Large” projects are defined as a construction value of at least $100 million or more. Candidate will be responsible for site observation and reporting on multiple assigned projects to government personnel. Candidate will provide technical and administrative support. Oversee construction, contract administration, and quality assurance activities in accordance with established policies, procedures, and regulations. Analyze design and construction issues with respect to contract requirements. Deliver recommendations to government personnel regarding compliance with contract provisions. Candidate should be prepared to review and interpret plans and specifications, submittals, reports, schedules, modifications, cost estimates, pay applications, change orders and claims. Provide field surveillance and prepare daily detailed reports covering all pertinent factors affecting cost and engineering considerations. Participate in pre-construction conferences with government personnel. Emphasis is placed on knowledge and experience with but not limited to HVAC systems, system controls, building automation, chilled water, plumbing, humidification, data centers, and other complex mechanical-engineering related elements found in large and complex buildings and utility plants. Education/Experience: Bachelors of Science in Mechanical Engineering or related field from an accredited college, preferred. Minimum of 10 years of engineering; construction and contract administration experience. Registered Professional Engineer (P.E.) preferred Army Corp of Engineering (USACE) or other federal project experience, preferred Experience using RMS 3.0, preferred Demonstrate proficiency and effective communications skills in the English language in both oral and written forms Interaction with clients and contractors requires candidate to have a professional presentation along with excellent communication skills and attention to detail. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter. We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here. We're looking for an experienced Mechanical Engineer responsible for the design, development, modification, and optimization of mechanical systems for a variety of weapon systems and other aerospace applications. This role focuses on creating innovative and reliable mechanical designs and components while ensuring their structural integrity, performance, and compliance with industry standards. The engineer will work with cross-functional teams to advance technologies in sectors such as defense, commercial aviation, and space exploration. Responsibilities: Design and Development: Design mechanical components and systems for UAS, weapon systems, and other aerospace vehicles, including airframes, propulsion systems, control surfaces, landing gears, and payload integration. Prototyping and Testing: Build and test prototypes to ensure mechanical reliability and performance, including ground and flight tests to validate designs. Structural Analysis: Conduct stress, strain, and fatigue analysis on structures and systems to ensure they can withstand operational conditions such as high speeds, altitudes, and varying temperatures. Thermal Management: Design and analyze thermal systems to manage heat dissipation, especially for high-performance aerospace applications. System Integration: Collaborate with electrical, avionics, and software engineers to integrate mechanical systems with sensors, communication, and control systems in unmanned aircraft. Material Selection: Evaluate and select lightweight, high-performance materials, optimizing for fuel efficiency, durability, and strength. Failure Analysis: Perform root cause analysis on mechanical system failures and develop solutions to enhance the safety and performance. UAV Maintenance and Repair Procedures: Develop guidelines for the inspection, maintenance, and repair of mechanical systems to ensure long- term operational efficiency. Regulatory Compliance: Ensure all designs meet relevant regulations and industry standards. Engage in R&D for cutting-edge unmanned technologies, including autonomous systems, additive manufacturing, and advanced composite materials. Documentation: Create detailed reports, design specifications, maintenance manuals, and testing documentation for mechanical systems. Qualifications: Education: Bachelor's or Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Experience: 3-7 years of experience in aerospace mechanical systems, including 2+ years working on unmanned aircraft, weapon systems, or other relevant systems. Skills: Proficiency in CAD and mechanical design software (e.g., SolidWorks) for aerospace applications. Proficiency in detailed design including geometric dimensioning and tolerancing (GD&T) and drafting. Experience with design for manufacturability (DFM) and tooling design. Experience with finite element analysis (FEA), computational fluid dynamics (CFD), and other simulation tools. Strong knowledge of fluid dynamics, thermodynamics, structural mechanics, and aerodynamics. Understanding of aerospace manufacturing processes, including 3D printing and advanced composite materials. Familiarity with UAV-specific regulations and broader aerospace certification processes (e.g., DO-160, AS9100). Strong analytical, problem-solving, and project management skills. Pay range for this role$115,000-$150,000 USD What's in it for you: Benefits: Competitive total compensation package Comprehensive benefit package options include medical, dental, vision, life, and more. 401k with company-match 4 weeks of paid time off each year 12 annual company holidays Why Join Zone 5 Technologies? Innovative Environment: Work on cutting-edge technology that is shaping the future of defense and aerospace. Collaborative Culture: Join a team of passionate professionals dedicated to pushing the boundaries of what's possible. Career Growth: Opportunities for professional development and career advancement. If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team! Note about our Texas roles: we are in the process of opening a location on the mid-west side of the DFW metro region. Roles in Texas will initially work remotely and then be expected to be onsite when that location opens in 2026. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: *************************

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As a Senior Engineer, you will provide senior level engineering/technical expertise on complex electric transmission design projects for high-voltage (HV) and extra high-voltage (EHV) overhead utility systems. Specifically, the position manages, prepares, reviews and/or provides guidance for line routing, survey coordination, PLS-CADD modeling, structure design, foundation design, clearance checks, plan/profile development, material specification and procurement, constructability evaluations, work order package preparation, permitting, vendor/subcontractor coordination and construction support. What You Will Be Doing: Develop and approve PLS-CADD Criteria Finalize PLS-CADD models Schedule project tasks for project support team Attend client stakeholder meetings Complete design review meetings with the client Mentor/train other engineering team members Provide input on special design questions Attend internal design review meetings What You Bring: Bachelor's in Engineering (required) Professional Engineer (PE) certification (required) 8+ years of related transmission line engineering experience in the electric utility industry (required) Experience in using PLS-CADD for designing transmission lines (required) Strong experience with design codes and standards such as NESC, IEEE, ASCE, and ACI Strong experience with liaising substation, environmental, right-of-way construction and maintenance stakeholders Demonstrated ability in the application of engineering theories and principles Increasingly proficient in practices of researching engineering and design issues, evaluating alternatives, preparing, and presenting recommendations Ability to work in a safe manner and always obey safety regulations Ability to be a self-starter and thrive in an unstructured, varied and deadline driven work environment Strong ability to collaborate with team members as well as peers in the electrical utility industry Effective communication skills (verbal, written and presentation) Demonstrated verbal and technical writing skills Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company's driving (MVR) policy So...Why Join Us? You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: Competitive compensation with yearly performance reviews and discretionary annual bonuses 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days) PTO (Paid Time Off) & 10 Paid Holidays Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days) Behavioral Medicine through Teladoc Short-Term Disability Insurance (Employer Paid) Long-Term Disability Insurance Life Insurance Pet Insurance Education Reimbursement Opportunities Flexible and Dependent Benefits Plan Referral Bonuses

Key Responsibilities Provide systems engineering support across the weapon system acquisition lifecycle Conduct reviews of armament programs to evaluate alternative plans, designs, and system performance Support management and sustainment of program technical baselines and system specifications Prepare technical documentation defining system and subsystem characteristics Perform system-level design reviews, validation activities, and engineering analyses Analyze and evaluate results of major weapon system engineering efforts Support risk management activities in accordance with AF SEAM processes Conduct engineering trade studies evaluating performance, cost, schedule, risk, reliability, and maintainability Provide technical recommendations, studies, audits, and analyses in support of program decisions Support proposal evaluations, requirements analysis, and system requirements baseline development Review and analyze approved system concepts, user requirements, and allocated/product baselines Required Qualifications Experience supporting DoD or Air Force acquisition and systems engineering programs Knowledge of weapon systems engineering and acquisition processes Experience conducting technical reviews, trade studies, and engineering analyses Ability to work in classified and operational environments Education & Certification · BS IRD + 20 years RE; or · MS IRD + 15 years RE; or · PhD IRD + 5 years RE Clearance Requirement Ability to work in classified and operational environments

We are Engineering the Future Only 30 minutes from Mobile Bay and just an hour from the white sand beaches of Alabama's Gulf Coast, your next career move could come with a view! Join Kaishan Compressor USA in Loxley, Alabama where we design and engineer high quality rotary screw air compressors that are driving a more energy efficient future. Our over 100,000 square foot facility is state-of-the-art and is climate controlled. We believe in delivering quality work within the deadline. We maintain professional interactions with our colleagues, customers, and suppliers and we strive to work effectively both independently and as part of a team. Come and grow with us! We are seeking a Manufacturing Engineer to join us in our Unit Assembly and Materials teams to be responsible for developing, evaluating, and optimizing our manufacturing processes while ensuring production efficiency and adherence to quality standards. Day to Day: Design and implement assembly processes for industrial compressors in a high-mix, low-volume environment. Plan workflow, space requirements, and equipment layout using Lean methodologies. Apply plant layout and material flow principles, including warehousing fundamentals. Specify, procure, and coordinate installation of material handling equipment (e.g. jibs, cranes) and other necessary tools, materials and gaging. Develop and improve manufacturing methods by leveraging knowledge of product design, materials, tooling, equipment capabilities, assembly techniques, and quality standards. Create detailed work instructions and train shop floor personnel on production processes. Review product designs for manufacturing and completeness. Utilize statistical methods to forecast manufacturing requirements and identify root causes of failures, recommending design or process changes as needed. Collaborate with management, engineering, and maintenance teams to resolve production issues and ensure schedule adherence. Support new product development to ensure manufacturability. Maintain and update plant layout drawings. About You: Thinking of applying? See if this sounds like you: Bachelor's degree in Engineering or related field required. Proficiency in computer-aided design and engineering software. (We use SolidWorks) Lean manufacturing experience; Six Sigma Green Belt or higher preferred. Strong project management skills, including timeline development and progress tracking. Experience estimating costs for new products and tooling. Skills Ability to interpret documents and schematics. Strong written and verbal communication skills for reporting, instructions and team training. Competence in statistical analysis and mathematics. Self-directed with excellent problem-solving and mechanical aptitude. Physical Requirements: Must be able to work on the manufacturing floor and lift up to 35 lbs. Frequent walking, bending, kneeling, and climbing throughout the workday. Must work safely in sensitive areas. Really Good Benefits: We offer medical, dental, vision, Short and Long-term Disability, Life Insurance, Cancer, Hospital, Critical Illness and Accident Insurance. We also have an impressive 6% 401K match and a quarterly gain sharing bonus program that is out of this world! We are proud to be an equal opportunity employer and will provide reasonable accommodations to enable individuals with disabilities to perform essential functions. Our workplace is drug, weapon, alcohol, and smoke free.

Job Description Are we the road to your future? We are currently searching for an experienced CEI Senior Project Engineer to support our Southeast Region located in Pensacola, FL. , applicants must have, at minimum, a Civil Engineering degree. What you'll be doing: Lead with confidence: Direct construction engineering administration and inspection programs. Drive success: Plan and organize team workflows; develop and refine project-specific policies, methods, and procedures. Ensure excellence: Review programs for compliance with client standards and deliver top-tier results. Shape the future: Identify and pursue new opportunities while fostering strong client partnerships for ongoing and future projects. Be the expert: Prepare proposals and cost estimates, review technical work and reports, and provide guidance to team members. Own the outcome: Manage projects to meet schedules and budgets, with periodic site visits to ensure everything is on track. What you need to have: Civil Engineering degree Registered Professional Engineer in the State of Florida 6 years of progressive experience in Major Road and Bridge Construction Familiarity with FDOT Policies and Procedures, (District 3 is a plus) FDOT Advanced MOT Certification Attend the CTQP Quality Control Manager course and pass the examination Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal guidelines may differ from state-specific guidelines. If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role. Valid driver's license. A satisfactory motor vehicle (MVR). Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: Employee Stock Ownership Plan (ESOP) Medical, Dental, & Vision 401(k) retirement savings plan + employer matching Paid Time Off (PTO) and holidays Employer-Paid Life/AD&D insurance Employer-Paid short-term disability and long-term disability Wellness incentives Student Debt Retirement Match Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “ For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference .” - Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Oxbridge Graduate | Immediate Start | Brent Are you a 2025 Oxbridge Graduate looking for practical experience with children? Whether you are looking to gain child-centred experience, exploring different career pathways or aspiring to become a Teacher - we have opportunities for Oxbridge Graduates in Brent! We are looking for an Oxbridge Graduate who can: Inspire young children with their academics Provide 1:1 and small group interventions in their specialist subject Support pupils' personal development Bring enthusiasm for academia and create a genuine ‘love for learning' As an Oxbridge Graduate in this role, you will: Be employed on a full-time basis Earn £475-£525 per week Gain direct experience working with subject specialists Have opportunities to qualify as a teacher and progress towards QTS To apply for this Oxbridge Graduate position, you will need: A minimum 2:2 degree from Oxford or Cambridge University Previous child-centred experience (desirable but not essential) The ambition to further your career through hands-on experience in education You will receive tailored support and access to exclusive opportunities for positions not yet advertised. As an Oxbridge Graduate, you will have a professional recruiter actively advocating for you with hiring managers. Brent offers an exciting and diverse community in the heart of London. With excellent transport links across the city, cultural attractions on your doorstep, and a thriving local atmosphere, it's a fantastic place for graduates to live and work. Ribbons & Reeves are London's leading Education Recruiters. We specialise in helping educators of all levels secure long-term and permanent roles, such as this Oxbridge Graduate role in Brent. For other roles like this, visit our website and search ‘Ribbons & Reeves'. We look forward to supporting you in your application for this Oxbridge Graduate role. Oxbridge Graduate | Immediate Start | Brent | INDCLASS

Looking for Manufacturing Engineer II to support the delivery of Boeing 787 aircraft technology. This professional will optimize the performance of a wide range of tasks to facilitate assembly operations, production and business unit objectives. This will include designing and arranging machines, tooling, and sequence of operations and making sure that mandatory modifications are incorporated to ensure configuration compliance and to improve efficiency. The position is onsite at Foley, AL facility. Relocation assistance is available. Primary Responsibilities * Ensuring sequence on manufacturing process and product builds, is followed and complies with EH&S and Quality requirements. * Owns design and arrangement of tooling and machines of the manufacturing process (layout) * Improve manufacturing processes/ products to achieve producibility working with design engineers. * Implement process upgrades by applying various engineering applications such as: robotics, automation and shop floor corrective action/countermeasures * Identify opportunities on drawings and specs to influence changes to engineering designs and line balancing, * Participate in tool design reviews to ensure tools are feasible and reduce build times and program costs during fabrication. * Uses data analytics / SPC for productivity, First Pass Yield and OEE targets and improvement. * Drive problem solving initiatives & challenge status QUO (C/A Investigations, OEE, FPY, Customer escapes) * Participates and contributes on PFMEA and Control Plans * Owns creation and maintains manufacturing process documents (routings, BOM, Visual aids, Std work, etc). * Participate on digital manufacturing solutions with support from Digital subject matter experts Basic Qualifications: * Bachelor's degree (typically in Science, Technology, Engineering or Mathematics (STEM)) and a minimum of 2 years of prior relevant experience unless prohibited by local laws/regulations. OR * In absence of a degree, 6 years of relevant experience is required. * Must be a U.S. Person/Permanent Resident "Green Card" holder. * Ability to read and interpret specifications and engineering drawings/models. * Ability to demonstrate adaptation of machine or equipment design to factory and production conditions. * Read, write, speak and understand work instructions both verbal and written, perform basic math calculations and conduct self-inspection / audit. * Demonstrated experience in application of Lean, through Continuous Improvement events. * Ability to multitask, problem solve and manage resources along with effective time management and organizational skills. * Intermediate knowledge and experience of various operation software and MS Office software. * Propose the sequence of operations and installations and specifies procedures for the fabrication of tools and equipment and other processes, which may include disassembly/assembly and repairs, to ensure efficiency and optimize performance. * Develop manufacturing processes that are applicable to statistical process control to ensure compliance and effective production. Preferred Qualifications: * Experience in robotics and automation. * Experience in Six Sigma/Red X. * Understanding of Project Management methods. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com. #ZR

Construction Materials Engineering Technicians Are you passionate about solving problems, enjoying being outdoors, and seeking a challenging opportunity with a firm committed to our employees and providing excellence? S&ME is seeking hard-working, motivated individuals to join our Construction Services team in Huntsville, Alabama, as a Construction Materials Engineering Technician. Join us at S&ME! Visit the Life tab on our LinkedIn profile to learn more about life at S&ME. What You Will Do: This role is perfect for individuals looking to enhance their skills in construction materials testing of soil, concrete, asphalt, and other relevant materials while gaining additional industry certifications. As a Construction Materials Engineering Technician, you will spend most of your time outdoors, participating in projects and ensuring their integrity and safety. Your contributions will be recognized as you witness projects come to life and gain valuable expertise. Project and Document Analysis: Comprehend project specifications before fieldwork; precisely document observations and test outcomes related to construction materials, including soil, concrete, asphalt, and other relevant materials. Metafield Application: Effectively handle data using field and lab information systems. Equipment Maintenance: Verify that field and laboratory equipment are precise and comply with industry standards. Special Inspection Monitoring: Adhere to International Building Code (IBC) guidelines for testing and inspecting construction materials. Stakeholder Interaction: Communicate with supervisors, contractors, and clients to report on project status and address any issues. Experience shifting work hours based on project needs and weather conditions, including early mornings, some Saturdays, and overtime (paid at time and a half). What We Are Looking For: We're looking for someone ready to roll up their sleeves and learn. If you enjoy working outdoors, aren't afraid to get your hands dirty, and want a career where every day is different, this could be the perfect fit. A positive attitude, willingness to learn, and reliability matter most. Qualifications: Education: High School diploma/GED Experience: Minimum of 2 years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials Certifications: Two(2) or more active certifications: American Concrete Institute (ACI): Field Testing Grade I; Strength Testing Technician; Laboratory Technician International Code Council (ICC): Special Inspector (Reinforced Concrete, Masonry, Soils) DOT Certifications in the fields of Aggregate, Conventional Density, Asphalt, and Concrete Key Competencies: Effective communication skills (speaking, reading, and writing) using the English language Math skills with a basic understanding of weight, volume, pressure, and units of measure The understanding of a fluctuating schedule and occasional travel Working Conditions and Physical Demands: This role involves hands-on work in outdoor environments, and with Company-provided Personal Protection Equipment (PPE), you'll need to be comfortable with: Working outdoors in varying weather conditions Walking over rough, uneven terrain and standing (potentially up to 12 hours a day) Routinely lifting and carrying 40-50lbs (field/laboratory samples and equipment) Working outside of normal business hours and traveling (typically out-of-town and/or overnight) as project needs arise We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of over 1,000 employee-owners across 10+ states collaborates to create a meaningful impact on our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs Medical, Dental & Vision Plans with HSA and FSA options Wellness Program offering $50 off per month on 2027 premiums Pet Insurance for your furry family members Ownership & Financial Perks 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan to help you plan ahead Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program Employee Recognition Program, $2,000 Referral Bonuses, and a company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted.

**Crane Aerospace and Electronics** has an exciting opportunity for a **Manufacturing Engineer-Electronics** at our **Fort Walton beach, FL** location. **About Crane:** **Crane Aerospace & Electronics** supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Located minutes away from picturesque white-sand beaches and emerald green water, our Crane Aerospace & Electronics Fort Walton Beach location is home to our Defense Power business - a leading supplier of high-power solutions for aerospace & defense applications. You'll join a trusted, dynamic organization that supplies prime defense manufacturers with custom radar, directed energy and electric warfare solutions for placement on innovative, next-gen military platforms. Join us and our growing business as we supply solutions that enable the latest defense technology! **Job Summary:** The Manufacturing Engineer performs independent assignments to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness. **Essential Functions:** + Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production. + Investigate, recommend, and implement manufacturing cost reduction and product improvement programs. + Identify root cause and corrective actions for manufacturing problems. + Participate in customer specification and statement of work reviews. + Participate in the review and evaluation of new product designs or design changes. + Review and analyze design change requests initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and to verify justification for change. + Evaluate, test and select facilities, equipment and materials required for production in conjunction with Production Supervisors, Purchasing and other groups. + Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions. + Develop manufacturing operating instructions. + Develop and track manufacturing metrics to monitor the health of processes. + Evaluate non-conformances as part of the Material Review Board + Direct work activities of production operators to aid in problem solving. + Develop procedures and train assemblers and operators in machine operations, processes or assembly applications. + Coordinate with vendors and customers. + Identify and prioritize work with limited input from manager. + Develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements. + Any other task assigned by supervisor or management. **Minimum Qualifications:** + Experience: 5+ years of experience as a Manufacturing Engineer + Knowledge: Practical application knowledge of the theories of modern production principles and methods as applied to a high technology electronics design and manufacturing operation; Basic knowledge of material characteristics and processing, chemicals; Basic concepts of electrical systems, mechanical systems, fluids, and heat transfer + Knowledge of AS9100 and AS9145 + Skills/Abilities: Able to effectively communicate with employees at all levels of the organization. + Education/Certification: BA or BS degree required. Preferred in Electrical Engineering, Industrial Engineering, Material Science or related field. + **Eligibility Requirement:** This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additionally, as a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). Applicants selected could be subject to a Government security investigation and must meet the eligibility requirements for access to classified information **Preferred Qualifications:** + Experience in a regulated manufacturing environment. **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month. + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. + **401k Retirement Plan:** 401k plan with company match + **Education Reimbursement:** eligible after 90 days of employment You can see a list of our benefits at *************************************** or visit our website at *************** for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. \#LI-CK1 #CAE _This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job._ _Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status._ At Crane, we believe that attracting and retaining the highest quality people is the best insurance of success. Our goal is to recruit talented people and train them within a culture that calls for performance with trust and respect. Join us. The unique backgrounds and differences of our associates make us stronger, more capable, and more successful. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions. Crane prioritizes career development for our associates. All associates receive an annual development plan that includes a mixture of on-the-job coaching and formal training experiences to support individual development needs. We firmly believe in associate growth that supports career progression and we will proactively support your ongoing career development.

SummaryAct as a change agent using the Toyota Production System Lean methodology to support the plant continuous improvement Journey. Perform continuous improvement and Kaizen events to eliminate waste, improve efficiency, and boost quality in the manufacturing process and product by applying the Lean principles and tools such as: 5S, Daily & Visual Management, Operators standard work, material flow and Just in Time (JIT). Partnership with Advanced Manufacturing engineers to bring innovation and automation to the process. Focus on creating flow, reducing lead times, and ensuring safety and ergonomics through standardized work and root cause analysis, often collaborating across engineering, production, and quality Job Description Roles and Responsibilities Responsible for plan, facilitate, execute or lead full week Kaizen events to improve the Safety, Quality, Delivery Productivity and Cost across the production lines and warehouse. Responsible to support the waste elimination and 5S programs across the shop floor. Responsible to develop, implement and update the operators standard work, including the cycle time study, line balance and demand level load. Support the team leaders to define, implement and sustain the daily management and assembly lines operational rhythm. Responsible to define, implement and coach the teams to sustain the visual management at the production lines. Responsible to prepare and update the Value Stream Maps (VSM). Perform 3P (Production Preparation Process) Kaizen events to design new assembly lines or improve the existing ones. Teach, train, coach, and mentor front line leaders and operators in the basic LEAN principles and tools. Share best practices across the areas and act as a conduit to accelerate improvements. Work closely with operations and advance manufacturing engineer teams to drive innovation and automation to the manufacturing processes. Required Qualifications Engineer degree from an accredited university or college. Minimum of 3 years of demonstrated experience as Lean engineer or Lean specialist applying the classical TPS (Toyota Production System) Lean methodology and approach. Lean Manufacturing - with proven experience leading or facilitating a Kaizen full week event based on the Toyota Production System methodology. Desired Characteristics Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Attended a Shingijutsu Kaizen event. Six Sigma Green Belt degree. Working an automated production environment with a continuous assembly moving lines. GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes For candidates applying to a U.S. based position, the pay range for this position is between $81,700.00 and $136,700.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set.Bonus eligibility: ineligible.This posting is expected to remain open for at least seven days after it was posted on January 16, 2026.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As a Senior Engineer, you will provide senior level engineering/technical expertise on complex electric transmission design projects for high-voltage (HV) and extra high-voltage (EHV) overhead utility systems. Specifically, the position manages, prepares, reviews and/or provides guidance for line routing, survey coordination, PLS-CADD modeling, structure design, foundation design, clearance checks, plan/profile development, material specification and procurement, constructability evaluations, work order package preparation, permitting, vendor/subcontractor coordination and construction support. What You Will Be Doing: Develop and approve PLS-CADD Criteria Finalize PLS-CADD models Schedule project tasks for project support team Attend client stakeholder meetings Complete design review meetings with the client Mentor/train other engineering team members Provide input on special design questions Attend internal design review meetings What You Bring: Bachelor's in Engineering (required) Professional Engineer (PE) certification (required) 8+ years of related transmission line engineering experience in the electric utility industry (required) Experience in using PLS-CADD for designing transmission lines (required) Strong experience with design codes and standards such as NESC, IEEE, ASCE, and ACI Strong experience with liaising substation, environmental, right-of-way construction and maintenance stakeholders Demonstrated ability in the application of engineering theories and principles Increasingly proficient in practices of researching engineering and design issues, evaluating alternatives, preparing, and presenting recommendations Ability to work in a safe manner and always obey safety regulations Ability to be a self-starter and thrive in an unstructured, varied and deadline driven work environment Strong ability to collaborate with team members as well as peers in the electrical utility industry Effective communication skills (verbal, written and presentation) Demonstrated verbal and technical writing skills Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company's driving (MVR) policy So...Why Join Us? You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: Competitive compensation with yearly performance reviews and discretionary annual bonuses 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days) PTO (Paid Time Off) & 10 Paid Holidays Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days) Behavioral Medicine through Teladoc Short-Term Disability Insurance (Employer Paid) Long-Term Disability Insurance Life Insurance Pet Insurance Education Reimbursement Opportunities Flexible and Dependent Benefits Plan Referral Bonuses

Key Responsibilities Provide systems engineering support for bomb rack and store release systems across the acquisition lifecycle Support design, development, integration, test, and sustainment of suspension and ejection systems Evaluate system and subsystem performance to ensure compliance with approved specifications Analyze and assess analog and digital electrically fired impulse cartridges, gas, and pneumatic mechanisms Conduct technical reviews and support system-level testing of bomb rack and release mechanisms Prepare and review technical documentation defining system and subsystem characteristics Support engineering trade studies evaluating performance, cost, schedule, risk, reliability, and maintainability Provide technical recommendations, analyses, and support to Government program offices and IPTs Review and analyze approved system concepts and requirements entered into system requirements baselines Required Qualifications Experience supporting DoD or Air Force weapon system acquisition programs Demonstrated knowledge of bomb rack, store suspension, and release systems Familiarity with electrically fired impulse cartridges, gas, and pneumatic mechanisms Experience conducting engineering analyses, technical reviews, and system evaluations Ability to work in classified and operational environments Education & Certification BS IRD + 20 years RE; or MS IRD + 15 years RE; or PhD IRD + 5 years RE Clearance Requirement Ability to work in classified and operational environments

Job Description We are Engineering the Future Only 30 minutes from Mobile Bay and just an hour from the white sand beaches of Alabama's Gulf Coast, your next career move could come with a view! Join Kaishan Compressor USA in Loxley, Alabama where we design and engineer high quality rotary screw air compressors that are driving a more energy efficient future. Our over 100,000 square foot facility is state-of-the-art and is climate controlled. We believe in delivering quality work within the deadline. We maintain professional interactions with our colleagues, customers, and suppliers and we strive to work effectively both independently and as part of a team. Come and grow with us! We are seeking a Manufacturing Engineer to join us in our Unit Assembly and Materials teams to be responsible for developing, evaluating, and optimizing our manufacturing processes while ensuring production efficiency and adherence to quality standards. Day to Day: Design and implement assembly processes for industrial compressors in a high-mix, low-volume environment. Plan workflow, space requirements, and equipment layout using Lean methodologies. Apply plant layout and material flow principles, including warehousing fundamentals. Specify, procure, and coordinate installation of material handling equipment (e.g. jibs, cranes) and other necessary tools, materials and gaging. Develop and improve manufacturing methods by leveraging knowledge of product design, materials, tooling, equipment capabilities, assembly techniques, and quality standards. Create detailed work instructions and train shop floor personnel on production processes. Review product designs for manufacturing and completeness. Utilize statistical methods to forecast manufacturing requirements and identify root causes of failures, recommending design or process changes as needed. Collaborate with management, engineering, and maintenance teams to resolve production issues and ensure schedule adherence. Support new product development to ensure manufacturability. Maintain and update plant layout drawings. About You: Thinking of applying? See if this sounds like you: Bachelor's degree in Engineering or related field required. Proficiency in computer-aided design and engineering software. (We use SolidWorks) Lean manufacturing experience; Six Sigma Green Belt or higher preferred. Strong project management skills, including timeline development and progress tracking. Experience estimating costs for new products and tooling. Skills Ability to interpret documents and schematics. Strong written and verbal communication skills for reporting, instructions and team training. Competence in statistical analysis and mathematics. Self-directed with excellent problem-solving and mechanical aptitude. Physical Requirements: Must be able to work on the manufacturing floor and lift up to 35 lbs. Frequent walking, bending, kneeling, and climbing throughout the workday. Must work safely in sensitive areas. Really Good Benefits: We offer medical, dental, vision, Short and Long-term Disability, Life Insurance, Cancer, Hospital, Critical Illness and Accident Insurance. We also have an impressive 6% 401K match and a quarterly gain sharing bonus program that is out of this world! We are proud to be an equal opportunity employer and will provide reasonable accommodations to enable individuals with disabilities to perform essential functions. Our workplace is drug, weapon, alcohol, and smoke free.

Job Description Are we the road to your future? We are currently searching for an experienced CEI Senior Project Engineer to support our Southeast Region located in Pensacola, FL. , applicants must have, at minimum, a Civil Engineering degree. What you'll be doing: Lead with confidence: Direct construction engineering administration and inspection programs. Drive success: Plan and organize team workflows; develop and refine project-specific policies, methods, and procedures. Ensure excellence: Review programs for compliance with client standards and deliver top-tier results. Shape the future: Identify and pursue new opportunities while fostering strong client partnerships for ongoing and future projects. Be the expert: Prepare proposals and cost estimates, review technical work and reports, and provide guidance to team members. Own the outcome: Manage projects to meet schedules and budgets, with periodic site visits to ensure everything is on track. What you need to have: Civil Engineering degree Registered Professional Engineer in the State of Florida 6 years of progressive experience in Major Road and Bridge Construction Familiarity with FDOT Policies and Procedures, (District 3 is a plus) FDOT Advanced MOT Certification Attend the CTQP Quality Control Manager course and pass the examination Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal guidelines may differ from state-specific guidelines. If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role. Valid driver's license. A satisfactory motor vehicle (MVR). Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: Employee Stock Ownership Plan (ESOP) Medical, Dental, & Vision 401(k) retirement savings plan + employer matching Paid Time Off (PTO) and holidays Employer-Paid Life/AD&D insurance Employer-Paid short-term disability and long-term disability Wellness incentives Student Debt Retirement Match Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “ For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference .” - Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter. We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here. We're looking for a Mechanical Engineer V/VI for Unmanned Aircraft Systems (UAS) which is a senior-level role responsible for leading the design, development, and implementation of advanced mechanical systems for UAVs. This position involves strategic oversight, innovative problem-solving, and mentorship of junior engineers. Engineers in this role will contribute to cutting-edge advancements in UAS technologies, driving innovation in areas such as autonomous systems, additive manufacturing, and aerospace materials. Key Responsibilities: Strategic Design Leadership: Lead the design of complex mechanical systems for UAVs, including advanced airframes, propulsion systems, and payload integration. Advanced Prototyping and Testing: Oversee the development and testing of UAV prototypes, ensuring compliance with performance and reliability goals. Comprehensive Structural Analysis: Conduct and review in-depth stress, strain, and fatigue analysis for UAV mechanical systems operating under extreme conditions. Thermal Management Expertise: Develop and implement innovative thermal systems for high-performance UAVs. Cross-Functional Integration: Lead collaboration with multidisciplinary teams to integrate mechanical systems with avionics, sensors, and software controls. Material Innovation: Drive research and development of advanced materials for UAV applications, focusing on composites and lightweight alloys. Failure Analysis and Solutions: Lead root cause analysis of mechanical failures and propose long-term, impactful solutions. Regulatory Compliance Leadership: Ensure all designs meet and exceed UAS regulations and industry certifications. Research and Development: Spearhead R&D initiatives to advance UAS technologies, including autonomous navigation and advanced manufacturing techniques. Mentorship and Leadership: Provide technical guidance and mentorship to junior and mid-level engineers, fostering professional growth within the team. Documentation and Reporting: Author comprehensive technical documentation, including design reviews, test reports, and compliance certifications. Qualifications: Education: Bachelor's or Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Experience: 10+ years of experience in aerospace mechanical systems, with at least 5 years dedicated to UAV development. Skills: Advanced proficiency in CAD and mechanical design software (SolidWorks). Extensive experience with FEA, CFD, and other advanced simulation tools. Expertise in structural mechanics, aerodynamics, and thermodynamics. In-depth knowledge of UAV manufacturing processes, including additive manufacturing and composite fabrication. Strong leadership and project management skills. Familiarity with advanced UAV regulations and certifications (e.g., FAA Part 107, DO-178). Proven ability to drive innovation and manage complex engineering projects. Pay range for this role$175,000-$225,000 USD What's in it for you: Benefits: Competitive total compensation package Comprehensive benefit package options include medical, dental, vision, life, and more. 401k with company-match 4 weeks of paid time off each year 12 annual company holidays Why Join Zone 5 Technologies? Innovative Environment: Work on cutting-edge technology that is shaping the future of defense and aerospace. Collaborative Culture: Join a team of passionate professionals dedicated to pushing the boundaries of what's possible. Career Growth: Opportunities for professional development and career advancement. If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team! Note about our Texas roles: we are in the process of opening a location on the mid-west side of the DFW metro region. Roles in Texas will initially work remotely and then be expected to be onsite when that location opens in 2026. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: *************************

Construction Materials Engineering Technicians Are you passionate about solving problems, enjoying being outdoors, and seeking a challenging opportunity with a firm committed to our employees and providing excellence? S&ME is seeking hard-working, motivated individuals to join our Construction Services team in Huntsville, Alabama, as a Construction Materials Engineering Technician. Join us at S&ME! Visit the Life tab on our LinkedIn profile to learn more about life at S&ME. What You Will Do: This role is perfect for individuals looking to enhance their skills in construction materials testing of soil, concrete, asphalt, and other relevant materials while gaining additional industry certifications. As a Construction Materials Engineering Technician, you will spend most of your time outdoors, participating in projects and ensuring their integrity and safety. Your contributions will be recognized as you witness projects come to life and gain valuable expertise. * Project and Document Analysis: Comprehend project specifications before fieldwork; precisely document observations and test outcomes related to construction materials, including soil, concrete, asphalt, and other relevant materials. * Metafield Application: Effectively handle data using field and lab information systems. * Equipment Maintenance: Verify that field and laboratory equipment are precise and comply with industry standards. * Special Inspection Monitoring: Adhere to International Building Code (IBC) guidelines for testing and inspecting construction materials. * Stakeholder Interaction: Communicate with supervisors, contractors, and clients to report on project status and address any issues. Experience shifting work hours based on project needs and weather conditions, including early mornings, some Saturdays, and overtime (paid at time and a half). What We Are Looking For: We're looking for someone ready to roll up their sleeves and learn. If you enjoy working outdoors, aren't afraid to get your hands dirty, and want a career where every day is different, this could be the perfect fit. A positive attitude, willingness to learn, and reliability matter most. Qualifications: * Education: High School diploma/GED * Experience: Minimum of 2 years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials * Certifications: * Two(2) or more active certifications: * American Concrete Institute (ACI): Field Testing Grade I; Strength Testing Technician; Laboratory Technician * International Code Council (ICC): Special Inspector (Reinforced Concrete, Masonry, Soils) * DOT Certifications in the fields of Aggregate, Conventional Density, Asphalt, and Concrete * Key Competencies: * Effective communication skills (speaking, reading, and writing) using the English language * Math skills with a basic understanding of weight, volume, pressure, and units of measure * The understanding of a fluctuating schedule and occasional travel Working Conditions and Physical Demands: This role involves hands-on work in outdoor environments, and with Company-provided Personal Protection Equipment (PPE), you'll need to be comfortable with: * Working outdoors in varying weather conditions * Walking over rough, uneven terrain and standing (potentially up to 12 hours a day) * Routinely lifting and carrying 40-50lbs (field/laboratory samples and equipment) Working outside of normal business hours and traveling (typically out-of-town and/or overnight) as project needs arise We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of over 1,000 employee-owners across 10+ states collaborates to create a meaningful impact on our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs * Medical, Dental & Vision Plans with HSA and FSA options * Wellness Program offering $50 off per month on 2027 premiums * Pet Insurance for your furry family members Ownership & Financial Perks * 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution * 401(k) Retirement Plan to help you plan ahead * Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development * Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave * Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program * Employee Recognition Program, $2,000 Referral Bonuses, and a company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted.

We are Engineering the Future Only 30 minutes from Mobile Bay and just an hour from the white sand beaches of Alabama's Gulf Coast, your next career move could come with a view! Join Kaishan Compressor USA in Loxley, Alabama where we design and engineer high quality rotary screw air compressors that are driving a more energy efficient future. Our over 100,000 square foot facility is state-of-the-art and is climate controlled. We believe in delivering quality work within the deadline. We maintain professional interactions with our colleagues, customers, and suppliers and we strive to work effectively both independently and as part of a team. Come and grow with us! We are seeking a Manufacturing Engineer to join us in our Unit Assembly and Materials teams to be responsible for developing, evaluating, and optimizing our manufacturing processes while ensuring production efficiency and adherence to quality standards. Day to Day: Design and implement assembly processes for industrial compressors in a high-mix, low-volume environment. Plan workflow, space requirements, and equipment layout using Lean methodologies. Apply plant layout and material flow principles, including warehousing fundamentals. Specify, procure, and coordinate installation of material handling equipment (e.g. jibs, cranes) and other necessary tools, materials and gaging. Develop and improve manufacturing methods by leveraging knowledge of product design, materials, tooling, equipment capabilities, assembly techniques, and quality standards. Create detailed work instructions and train shop floor personnel on production processes. Review product designs for manufacturing and completeness. Utilize statistical methods to forecast manufacturing requirements and identify root causes of failures, recommending design or process changes as needed. Collaborate with management, engineering, and maintenance teams to resolve production issues and ensure schedule adherence. Support new product development to ensure manufacturability. Maintain and update plant layout drawings. About You: Thinking of applying? See if this sounds like you: Bachelor's degree in Engineering or related field required. Proficiency in computer-aided design and engineering software. (We use SolidWorks) Lean manufacturing experience; Six Sigma Green Belt or higher preferred. Strong project management skills, including timeline development and progress tracking. Experience estimating costs for new products and tooling. Skills Ability to interpret documents and schematics. Strong written and verbal communication skills for reporting, instructions and team training. Competence in statistical analysis and mathematics. Self-directed with excellent problem-solving and mechanical aptitude. Physical Requirements: Must be able to work on the manufacturing floor and lift up to 35 lbs. Frequent walking, bending, kneeling, and climbing throughout the workday. Must work safely in sensitive areas. Really Good Benefits: We offer medical, dental, vision, Short and Long-term Disability, Life Insurance, Cancer, Hospital, Critical Illness and Accident Insurance. We also have an impressive 6% 401K match and a quarterly gain sharing bonus program that is out of this world! We are proud to be an equal opportunity employer and will provide reasonable accommodations to enable individuals with disabilities to perform essential functions. Our workplace is drug, weapon, alcohol, and smoke free.