Research and development engineer jobs in Redwood City, CA - 4,576 jobs

Short Term Assignment - 30-45 Days with potential for extension On-Site in San Francisco, CA $45-45/hr Job Title: Mechanical Test Engineer Type: Full-Time We are seeking a Mechanical Test Engineer to support testing, validation, and manufacturing of electro-mechanical and optical products in R&D and production environments. Responsibilities Perform mechanical, optical, and electronic testing for product validation and quality. Support cleanroom assembly of precision electro-mechanical systems. Evaluate component manufacturability during the NPD lifecycle. Operate and troubleshoot test equipment while following safety standards. Perform optical alignment using multi-axis robotic assembly systems. Support DOE, special builds, and PFMEA activities with engineering teams. Qualifications 2+ years of experience in mechanical testing, manufacturing, or product development. Hands-on experience with electro-mechanical, optical, or electronic components. Familiarity with cleanroom manufacturing and test environments. Experience supporting R&D and volume production builds.

The Opportunity: The Palate of a Chef, the Mind of a Scientist TCHO is looking for a rare professional to serve as the tactical engine of our research and production. This individual will fill a high-impact role that bridges the gap between creative sensory exploration and technical production. This is a hands-on role at our factory, responsible for tending the entire lifecycle of our chocolate. This begins with the cacao beans being grown around the world by our farmer partners, to the final production of high-end chocolate and confections at our production facility in Berkeley. We are seeking a maker who can manage complex data and production schedules while maintaining a disciplined focus on creativity and flavor. This position is 100% onsite due to the hands-on nature of the role, including production, sensory evaluation, laboratory work, and small-batch confectionery manufacturing. 1. Sensory Mastery & Tasting Daily Analysis: Lead disciplined daily sensory panels of raw cacao liquors, experimental batches, finished chocolate, and confections to ensure every product meets TCHO standards. Raw Material Selection: Participate in the selection and sensory analysis of all raw materials, including cocoa beans, liquor, powder, butter, and inclusions such as nuts or vanilla. Final Sign-off: Provide sensory sign-off for final products coming off the line to ensure manufacturing quality and consistency. 2. The “Source” & Laboratory Management Bean Sample Management: Manage the intake of cacao samples from global partners, including roasting, winnowing, and grinding micro-batches to evaluate fermentation quality and genetic potential. Flavor Lab Oversight: Manage daily operations of the flagship TCHO Flavor Lab space (one of only 12 worldwide). Operational Upkeep: Oversee lab organization, cleaning, sample retention, and restocking of laboratory supplies and equipment. 3. Production, Formulation & Retail Confectionery Formula Creation: Develop and manage proprietary daily production formulas used by the manufacturing team. Retail Confectionery Production: Act as a Confectioner for TCHO Retail, responsible for creating small-batch and small-lot confections for retail customers, including hand-crafted and limited-run items. Efficiency & Scalability: Support factory operations by optimizing run times, flush materials, FIFO practices, and small-batch scalability. SOP Compliance: Ensure all product SOPs are followed, including requirements related to cross-contamination, Organic, Kosher, and Fair Trade certifications. 4. New Product Development (NPD) Dream-to-Reality: Translate creative product concepts into consistent, repeatable production. Prototyping: Execute hands-on prototyping and produce sales and retail samples, including chocolate formulas, plant-based ganache, enrobed items, panned goods, and other confections. Scaling: Move products from lab-scale concepts to small industrial and retail-ready production. Who You Are Palate-Driven: You possess an advanced ability to articulate flavor and a deep interest learning how the magic of chocolate comes to life. Analytical: You love a good system and can track R&D data and formulas with precision to keep projects on a professional timeline. Technically Grounded: You likely have a background in Food Science, Pastry, or Confectionery and know your way around the bakery and confectionery world. Onsite & Flexible: This is not a desk job. You are based at our Berkeley HQ and willing to work weekends to keep the lab and production cycles moving. Skills & Abilities Bachelors' degree or equivalent Minimum 3 years working in pastry, confectionary or chocolate industry, Demonstrated leadership experience of teaching and developing teams within food industry. Excellent writing, reading and communication skills Spanish fluency is a major plus. Ability to transport and move 50-pound handloads Must be able to remain in a stationary position for entire shift Must be able to work above ground levels-10 feet and in cold and warm temperature work environment

80Twenty is a boutique marketing recruitment agency that connects high-growth companies with exceptional candidates. Want to build technology that truly moves the needle in healthcare? Join a fast-scaling, profitable healthcare services company - independently grown and not VC-backed - on a mission to make healthcare simpler, smarter, and more human! Our client is a healthcare tech and services company based in San Francisco, combining clinical expertise, operational excellence, and modern engineering to reshape how people experience care. From personalized medication management and transparent pharmacy pricing to community-based chronic care support, we're building a system that empowers both patients and providers. This is a fully onsite role based in San Francisco, CA. Candidates must be located within 30 miles of San Francisco. The standard schedule is Monday-Friday, 9am-7pm and may vary depending on business needs and role responsibilities. In this role, you will: Design, build, and scale backend services that power pharmacy, telehealth, and patient-facing workflows. Collaborate cross-functionally with product, operations, and pharmacy teams to deliver seamless integrations and reliable systems. Lead architectural design discussions and set long-term technical direction for the backend stack. Implement best practices for system reliability, observability, security, and scalability. Drive operational excellence through CI/CD pipelines, cloud infrastructure (AWS), and container orchestration (Kubernetes). Mentor fellow engineers and help shape our backend engineering culture. Optimize system performance and streamline complex data flows across distributed services. Influence and define standards for how we build, test, and deploy software across the company. Who You Are 7+ years of backend engineering experience, ideally in fast-moving production environments. Strong experience with Node.js (TypeScript / JavaScript) and modern backend frameworks. Deep familiarity with AWS, Kubernetes, CI/CD, and distributed system design. Adept at owning code from design through deployment - you care about maintainability, reliability, and long-term scalability. Excellent communicator who enjoys collaborating across disciplines. Motivated by solving complex real-world problems in healthcare and improving patient outcomes. Bonus points for experience in healthcare, pharmacy systems, inventory/fulfillment flows, or regulated environments. Why This Role Stands Out You'll own high-impact systems that directly affect patient and provider experiences. You'll shape backend architecture and engineering best practices in a growing company. You'll join a profitable, non-VC-backed organization focused on long-term sustainability. You'll work in-person with an ambitious, mission-driven team in downtown San Francisco. Competitive compensation, equity opportunities, and strong benefits designed to help you thrive. This is a great opportunity to be a key member of the engineering team, taking technical ownership of our pharmacy platform's core backend systems. Your work will directly power real-time healthcare operations and improve access to care. If you're excited to apply your engineering expertise to meaningful healthcare infrastructure - and want to join a company that values autonomy, sustainability, and impact - we want to hear from you! Base salary: $250k-300k DOE + generous equity and benefits

A fast-growing, deeply technical AI company is looking for a Research Engineer to join a small, high-performing team building the next generation of agentic LLM systems for software development. This is an opportunity to work at the frontier of AI, helping design and evaluate models that can understand, write, and reason about complex codebases. We are looking for someone who is passionate about AI for code, obsessed with understanding how LLMs behave, and excited to help push the boundaries of autonomous software engineering. What You'll Work On Design and run large-scale LLM evaluations, benchmarks, and experiments - particularly for code understanding and generation tasks. Build tools, datasets, and research frameworks that measure LLM reasoning, reliability, grounding, and hallucination reduction. Collaborate closely with product and engineering teams to improve model performance across real-world developer workflows. Work with frontier LLMs (across multiple providers) to analyze behavior, provide structured feedback, and drive improvements in accuracy, reliability, and autonomy. Prototype new capabilities for long-horizon agentic systems, including retrieval, planning, debugging, and automated coding workflows. Contribute to model fine-tuning and alignment work, including SFT, LoRA, DPO, or RLHF pipelines. Build production-quality research tools and evaluation pipelines that scale to real engineering environments. What We're Looking For 3+ years of experience in AI/ML engineering, research engineering, or similar fields. Strong coding fundamentals and comfort working in production environments (Python preferred). Hands-on experience with LLMs (training, fine-tuning, benchmarking, or evaluation). Experience with transformer architectures, retrieval-augmented generation (RAG), or reasoning-heavy LLM workflows. Deep interest in code generation, AI developer tools, or program synthesis (professional or personal projects). Ability to think rigorously about model behavior, failure cases, and reliability. Comfortable working in a fast-paced, highly collaborative environment with end-to-end ownership. Bonus Points Experience with AI systems for code: program synthesis, automated debugging, static analysis, code search, etc. Prior work with agentic or multi-step reasoning systems. Contributions to evaluation frameworks, benchmarks, or open-source model tooling. Background in compilers, programming languages, distributed systems, or developer tooling. Research experience at top universities, labs, or advanced ML teams. Why This Role Is Exciting Work directly with cutting-edge LLMs and agentic tooling. Influence the direction of an emerging AI product with real-world impact. Solve some of the hardest problems in AI today: evaluation, grounding, reasoning, and autonomous coding. Join an elite team with deep experience in LLMs, distributed systems, and developer productivity tools. Massive opportunity for ownership, impact, and career growth. If you're passionate about AI for software engineering, love solving deep technical problems, and want to work at the frontier of LLM research, we'd love to hear from you.

Top 3 must haves: Jira Atlassian Automotive experience with OEMs Integration work within Atlassian systems We are seeking a skilled and detail-oriented Atlassian Platform Engineer to join our team. The successful candidate will be responsible for managing, optimizing, and supporting our suite of Atlassian products, including Jira, Confluence, and other related tools. You will work closely with various departments to understand their needs, implement solutions, and ensure the effective utilization of Atlassian products to improve business processes and productivity. You Will: • Manage and administer Atlassian products (Jira, Confluence and related Add-ons etc.) ensuring optimal performance and reliability. • Create, Configure and customize Jira projects, workflows, permissions, and schemes to meet business requirements. • Create custom application integrations through code as needed to integrate Atlassian tools with other platforms as needed • Maintain and support Atlassian integrations with other tools and systems • Collaborate with stakeholders to gather and analyze requirements for new projects and enhancements. • Identify use cases for business and process automation and help automate processes to save time and effort and improve efficiency • Provide support to end-users and troubleshoot issues promptly. • Participate in projects related to the implementation and enhancement of Atlassian products. • Ensure projects are completed on time, within scope, and within budget. • Monitor project progress and report on key metrics to stakeholders. • Identify and recommend best practices and process improvements to maximize the use of Atlassian tools. • Stay up to date with the latest Atlassian features, updates, and industry trends. • Conduct regular system audits and implement changes to improve system performance and usability. You Bring: • Bachelor's degree in information technology, Computer Science, Business Administration, or related field. • 2-4 years' experience as an Atlassian Engineer • 1+ years' experience building integrations and automations for SaaS tools • Knowledge of REST APIs and authentication mechanisms, including OAuth is required • Good understanding of Atlassian products, including Jira, Confluence, and associated plugins. • Strong programming skills with experience in Groovy/Python, SQL is required • Excellent problem-solving skills and attention to detail. • Effective communication and interpersonal skills with the ability to work collaboratively with diverse teams. • Experience with cloud and on-prem Atlassian instances is a huge plus

Job Title: Sustaining Engineer Duration: 12 Months As a Sustaining Engineer, you will own post ramp qualifications, second source qualifications, and quality improvements for devices. You will partner with other electrical engineers during development, take over products as they reach maturity, and support them through end-of-life. You must be a great hands-on engineer and generalist that can wear many hats across EE, RF, Displays, Power, Audio, etc., and have strong interpersonal skills and experience working with cross-functional teams. The ideal candidate will have expertise in electrical and hardware design and have shipped consumer devices. RESPONSIBILITIES Take ownership of hardware projects from production ramp through end-of-life. Develop and qualify hardware changes, including new components and design/process changes. Participate in engineering reviews, such as schematic, layout, and DFM, with both cross-functional teams and external engineering partners. Develop system test plans, including test methodology and coverage, to validate changes and ensure product reliability. Create documentation such as Engineering Change Orders and general process documentation. Monitor data and test reports from design validation, production builds, and field returns to identify potential issues. Participate in Failure Analysis. QUALIFICATIONS BS in Electrical or Computer Systems Engineering, or equivalent experience. Direct experience in electrical hardware engineering and/or sustaining engineering. Knowledge of the technical rigor and processes required to bring a product to market at scale. Strong interpersonal and communication skills, and the ability to work with cross-functional engineering teams. Experience working with external partners, such as vendors and manufacturers. Experience reading and creating technical documentation such as datasheets, technical drawings, block diagrams, etc. Experience with common lab and test equipment such as oscilloscopes, spectrum analyzers, multimeters, etc. Experience utilizing schematic and layout tools such as Cadence PREFERRED Skills: MS in Electrical or Computer Systems Engineering. Experience within the Consumer Electronics industry. Experience with offshore manufacturing partners. Experience with electrical subsystems, such as Power/Battery, Display/Camera, Wireless/RF, Audio, etc.

A nationally recognized design and engineering firm is seeking a Senior Project Electrical Engineer to lead complex projects across diverse sectors, including healthcare, education, and corporate environments. You will play a key role in delivering innovative electrical solutions, collaborating with multidisciplinary teams, and ensuring technical excellence. Are you ready to join a creative, forward-thinking team that values collaboration and design innovation? If so, let's connect. The Senior Project Electrical Engineer will be responsible for... Leading electrical design for building systems on large-scale projects Coordinating with architects, engineers, and clients to deliver integrated solutions Mentoring junior engineers and contributing to team development The Senior Project Electrical Engineer should have the following qualifications: Bachelor's degree in Electrical Engineering PE license required 8+ years of experience in electrical building systems design Benefits/Perks Collaborative, creative team environment Competitive compensation and performance bonuses Professional development opportunities

HCLTech is looking for a highly talented and self-motivated Manufacturing Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Manufacturing Engineer Position Type: Fulltime Location: Milpitas, CA Responsibilities: Manufacturing Process & Documentation Manage general manufacturing processes including BOM management, assembly procedures, tools, and drawings. Maintain accurate documentation and ensure compliance with established standards. Production Support Provide day-to-day manufacturing production support. Drive process improvements, conduct root cause investigations, and perform failure analysis. Redline and update manufacturing instructions and test methods as needed. Change Management Execute change order processes with proper reasoning and justification. Manage change requests requiring impact assessments, coordinate meetings with cross-functional teams, and ensure timely closure. Validation & Qualification Prepare IQ/OQ/PQ protocols in line with standard procedures. Organize review meetings with the validation board and ensure report completion and closure. Conduct periodic reviews of validation plans to align with current state. Risk & Compliance Demonstrate proficiency in PFMEA and risk assessments at both process and product levels. Ensure adherence to IEC and EMC standards and medical regulatory requirements. Technical Expertise Interpret and create/edit electrical schematics and drawings. Collaborate with Quality teams regularly. Perform NCMR disposition per SOP guidelines. Troubleshoot component-level issues related to PCBA, electrical designs, test fixtures, tools, and equipment. Build electro-mechanical test fixtures/equipment/tools based on specifications. Perform preventive maintenance of equipment and fixtures periodically. Manage End-of-Life (EOL) and component obsolescence. Audit & Compliance Support audits, address observations, and implement corrective actions. Own NC and CAPA processes and deliver on time. Design & Development Work with CAD models and PCB layouts. Write technical reports for component evaluations and engineering studies. Systems & Tools Proficient in SAP and Agile systems. Cross-Functional Collaboration Communicate effectively with cross-functional teams, buyers, planners, suppliers, and calibration coordinators. Provide project updates to senior management and take ownership of deliverables. Work closely with technicians to collect data for continuous improvement. Pay and Benefits Pay Range Minimum: $71000 per year Pay Range Maximum: $108000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

The CAD Engineer is responsible for designing and developing new motor assemblies, managing part design, and overseeing change management for existing motors. Essential Duties and Responsibilities · Design and develop motor products, including the creation of 3D CAD models, detailed drawings, and proof-of-concept evaluations. · Generate drawings and bills of materials (BOM) for Moons' motor projects; collaborate with cross-functional teams to define manufacturing processes, supply chain strategies, and inspection standards. · Coordinate with supplier factory teams; conduct comprehensive design reviews for parts and tooling quotations, support part and tool development, and contribute to first article inspections for part approval. · Assemble, test, and analyze First Unit to Test (FUTT) prototypes. · Participate in Design for Manufacturability and Effects Analysis (DFMEA) as required. · Conduct performance testing and establish product specifications. · Offer technical expertise to manufacturing operations, Lin Engineering's design engineers, and procurement personnel. · Manage Engineering Change Notices (ECNs). · Assess competitive products and compile reports to identify opportunities for improvement. · Assist in product field failure (RMA) analysis. · Complete and follow up on engineering requests/orders. · Perform additional responsibilities as assigned. General Requirements: · Consistently meets the performance factors outlined on the Performance Appraisal form and adheres to Company Core Values and operating principles. · Demonstrates commitment to Lean implementation by applying methodologies such as Process Mapping, Visual Management, Workplace Layout, Standard Work, and minimizing the 7 Wastes. · Maintains open communication with managers, colleagues, affiliates, vendors, and other business contacts. · Ensures safe use of equipment and materials by following prescribed safety procedures and implementing appropriate safeguards. · Upholds Lin Engineering's standards and promotes compliance among peers. · Exhibits organizational skills, independence, reliability, attention to detail, adaptability, and a dedication to excellence. · Adjusts workload and priorities effectively in response to evolving deadlines and requirements. · Possesses strong written and verbal communication abilities, including proficiency in grammar and business correspondence. · Demonstrates thorough knowledge of clerical and administrative practices and delivers high-quality customer service. · Maintains a neat and professional appearance. · Collaborates effectively with team members. Deliverables · Decrease ECN response time. · Reduce RMA occurrences due to ECN. · Minimize errors in drawings and technical details before ECN submission. Qualification Requirements: Candidates must be able to perform all essential duties satisfactorily. The requirements below represent the knowledge, skills, and abilities necessary for this position. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: · A Bachelor's degree in Mechanical Engineering from an accredited institution is required; 0-3 years of experience in product design and engineering change management preferred. · Experience as a design engineer for high-volume mechanical products utilizing die casting, injection molding, machining, and stamping techniques is desirable. Knowledge of motor design is advantageous. · Strong understanding of manufacturing processes related to part and assembly design. · Proficiency in GD&T and its application. · Experience with mechanical and electrical test equipment (e.g., calipers, machine tools, oscilloscopes, DMMs, dynamometers, torque transducers) is a plus. Computer Skills: · Proficient in Microsoft Office Suite, including Outlook, Word, Excel, PowerPoint, and MS Project. · Proficient in computer-aided design software such as SolidWorks, Autodesk, Pro/E, or comparable mechanical design programs. · Familiarity or experience with SAP is considered an asset.

Previous Pharmaceutical/Biotech experience is mandatory for this role. MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and other Consulting services. MMR Consulting has offices in Canada, USA, and Australia. This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers and specialists involved in project management, commissioning and qualification, of equipment, systems and facilities. The work will require working out of the client's facilities in San Francisco Bay Area, California. This role is for Bioprocess Sr. C&Q Engineer role to work on the commissioning, qualification, startup of upstream and downstream bioprocess systems/equipment in the biopharmaceutical industry, as well as process equipment in pharma/biotech industries. The ideal candidate should possess leadership skills to lead/mentor intermediate/junior engineers. Responsibilities Provide technical guidance into the commissioning, qualification and start-up of various equipment and facilities used in life science manufacturing, such as bioreactors, tanks, CIP, Buffers, Media, Chrom, TFF, washers & autoclaves, etc. Lead the development of key qualification deliverables during the project lifecycle to ensure project is well defined, and the action plan to test the system is applicable and relevant. Lead qualification processes throughout the project lifecycle such as VPP, Risk Assessments, RTM, DQ, FAT, SAT, IQ, OQ and PQ as appropriate to ensure timely completion and to ensure all quality and engineering specifications are met. Prepare protocols, execute protocols, summarize data, resolve deviations, prepare final reports. Experience with C&Q of process equipment, utilities, facilities is an asset. Thermal Validation experience is an asset. Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, provide updates. Engage other departments, as required, for design reviews and decisions. Travel may be occasionally required for meetings with clients, equipment fabrication vendors or Factory Acceptance Testing (FATs). Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases. Client-management (maintain key Client relationships in support of business development and pursuit of new work), project scheduling/budgeting, coordination of client and MMR resources for effective project delivery, supporting business development (providing technical support to the sales as required for proposals/opportunities), presenting at industry conferences/publishing papers etc. Visit construction and installation sites following all site safety requirements. Other duties as assigned by client, and/or MMR, based on workload and project requirements. Qualifications 8-12+ years for years of experience in commissioning, qualification or validation of various systems within the pharmaceutical/biotech industry. Excellent written and spoken English is required including the preparation of technical documents in English Knowledge of requirements for a cGMP operations, including SOPs, Change Controls, Validation. Experience with developing and executing validation projects. Risk-Based Commissioning & Qualification approaches, such as ASTM E-2500 or ISPE ICQ, is considered an asset, but not required. Experience with commissioning and qualification of biotech process equipment (upstream or downstream or both), such as some, but not all, of the following: fermentation, bioreactors, downstream purification processes (chromatography, TFF, UF) is required Experience with commissioning & qualification of process control systems (i.e. PCS, SCADA, Historians) and building automation systems (i.e. Siemens Insight / Desigo, JCI Metasys) are considered an asset, but not required. Experience with Qualification or Validation of clean utilities, ISO clean rooms, and Thermal Validation is considered an asset. Experience with preparation and execution of URS's, DQ's, RTMs, Risk Assessments, CPPs, VPPs, FATs, SATs, IOQs, NCRs, Final Reports. Ability to lift 50 lbs. Engineering or Science degree, preferably in Mechanical, Electrical, Chemical, Biochemical, Electromechanical or a related discipline. Ability to handle multiple projects and work in a fast-paced environment. Strong multi-tasking skills Salary range: 100,000$ -145,000$ based on experience. Equal Employment Opportunity and Reasonable Accommodations MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

A leading mechanical contractor specializing in HVAC and Plumbing systems for commercial, industrial, and institutional construction projects is seeking a Senior Design Engineer to join their growing engineering team. This is a high-impact role responsible for developing mechanical system designs, supporting construction operations, and delivering high-quality engineered solutions for complex building projects. If you're a mechanical engineer who enjoys solving technical challenges, collaborating with field teams, and influencing project success from concept through construction, we want to speak with you. What You'll Do Lead mechanical (HVAC & plumbing) design efforts for new construction and renovation projects across commercial, industrial, healthcare, education, and specialty markets. Prepare load calculations, equipment selections, and detailed design documents including plans, specifications, and technical reports. Perform design reviews, value-engineering evaluations, and constructability assessments to optimize system performance and project cost. Support project managers, estimators, and field teams with design clarifications, submittal reviews, RFIs, and technical problem-solving during construction. Collaborate with architects, structural engineers, civil engineers, and trade partners to ensure coordinated, code-compliant design packages. Work closely with field installation teams to confirm feasibility, identify improvements, and support installation sequencing. Lead system analysis for energy performance, system efficiency, life-cycle costing, and equipment sizing. Ensure all designs meet building codes, mechanical standards, and company quality expectations. Mentor junior engineers, assist with design standards development, and help elevate overall engineering capabilities. What You Bring Bachelor's degree in Mechanical Engineering or related field; PE license preferred. 5-10+ years of experience designing HVAC and plumbing systems for building construction projects. Strong knowledge of mechanical codes, building codes, and industry standards (IMC, IPC, ASHRAE, NFPA). Proficiency with engineering design tools such as Revit, AutoCAD, Trane Trace / HAP, and industry-specific calculation software. Experience working for a mechanical contractor or MEP consulting firm strongly preferred. Ability to interpret construction drawings and collaborate closely with field installation teams. Strong communication skills with the ability to interface directly with clients, contractors, and internal stakeholders. Self-driven, detail-oriented, and capable of managing multiple projects concurrently. 🔹 Why Join Us? Opportunity to influence mechanical system design across major construction projects. Collaborative, team-oriented culture where engineering and field teams work hand-in-hand. Competitive compensation and benefits package. Strong pipeline of exciting projects and long-term growth opportunities.

Senior Project Engineer - Water / Wastewater Construction We are partnering with a well-established water and wastewater general contractor with a strong presence across the Bay Area to recruit a Senior Project Engineer to support and help lead the delivery of complex water and wastewater infrastructure projects. This role is ideal for an experienced Project Engineer ready to take on increased responsibility, mentor junior engineers, and position themselves for progression into a Project Manager role. Key Responsibilities Support the execution of water and wastewater treatment plant and pipeline projects Manage and oversee RFIs, submittals, change orders, and document control Assist with project planning, scheduling, cost tracking, and forecasting Coordinate closely with Project Managers, Superintendents, inspectors, and subcontractors Review plans and specifications and support constructability reviews Track material procurement and subcontractor performance Assist with QA/QC documentation, safety compliance, and regulatory requirements Mentor and support Project Engineers and field staff Participate in preconstruction planning and project start-up activities Required Experience & Qualifications 5-10+ years of heavy civil construction experience, with a focus on water and/or wastewater projects Experience on treatment plants, pump stations, pipelines, or related utility infrastructure Strong familiarity with public works and municipal projects (e.g., SFPUC, EBMUD, local water districts) Bachelor's degree in Civil Engineering, Construction Management, or related field Strong technical, organizational, and communication skills Ability to manage multiple workstreams in a fast-paced project environment Experience with Procore, Primavera, or similar construction management software preferred Why This Opportunity Work on high-profile water and wastewater infrastructure projects across the Bay Area Clear path for career advancement into Project Manager or Senior PM roles Exposure to technically complex projects with experienced leadership teams Long-term backlog and strong regional market presence Competitive compensation and comprehensive benefits package

Ultimate Staffing is currently seeking a R&D Technician to join a client in San Jose, CA. Shift 6:30 PM- 6:30 am Sat-Tue or Shift 6:30 PM- 6:30 am Wed- Sat Requirements: · High school diploma with 1+ years of experience in an R&D laboratory or manufacturing environment. · Ability to work in dry rooms and gloveboxes, requiring fine motor skills for extended periods, standing, reaching, twisting motions with hands, and lifting up to 25 lbs. · Strong attention to detail; ability to follow procedures and safely handle chemicals. · Adaptability to evolving processes and enthusiasm for learning new techniques. · Clear written and verbal communication skills to logically convey observations and thought processes. · Self-motivated and able to work both independently and as part of a team. · Proficient in Outlook, SharePoint, and Microsoft Office. Preferred: · Experience working in gloveboxes and/or dry rooms. ·Familiar with metrology tools and techniques (image tools, radiograph and etc) ·Experience in cell assembly. 1. 12 hr schedule working on process tools 2. Perform tasks as defined by engineers 3. Run process tools as per SOP and work on HMI operated systems 4. Identify product quality during processing and gather process details and upload to data recording systems 5. Able to work in a team environment and individually manage processes 6. Should be able to learn and get trained to handle operating tools All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

A fast-growing, deeply technical AI company is looking for a Research Engineer to join a small, high-performing team building the next generation of agentic LLM systems for software development. This is an opportunity to work at the frontier of AI, helping design and evaluate models that can understand, write, and reason about complex codebases. We are looking for someone who is passionate about AI for code, obsessed with understanding how LLMs behave, and excited to help push the boundaries of autonomous software engineering. What You'll Work On Design and run large-scale LLM evaluations, benchmarks, and experiments - particularly for code understanding and generation tasks. Build tools, datasets, and research frameworks that measure LLM reasoning, reliability, grounding, and hallucination reduction. Collaborate closely with product and engineering teams to improve model performance across real-world developer workflows. Work with frontier LLMs (across multiple providers) to analyze behavior, provide structured feedback, and drive improvements in accuracy, reliability, and autonomy. Prototype new capabilities for long-horizon agentic systems, including retrieval, planning, debugging, and automated coding workflows. Contribute to model fine-tuning and alignment work, including SFT, LoRA, DPO, or RLHF pipelines. Build production-quality research tools and evaluation pipelines that scale to real engineering environments. What We're Looking For 3+ years of experience in AI/ML engineering, research engineering, or similar fields. Strong coding fundamentals and comfort working in production environments (Python preferred). Hands-on experience with LLMs (training, fine-tuning, benchmarking, or evaluation). Experience with transformer architectures, retrieval-augmented generation (RAG), or reasoning-heavy LLM workflows. Deep interest in code generation, AI developer tools, or program synthesis (professional or personal projects). Ability to think rigorously about model behavior, failure cases, and reliability. Comfortable working in a fast-paced, highly collaborative environment with end-to-end ownership. Bonus Points Experience with AI systems for code: program synthesis, automated debugging, static analysis, code search, etc. Prior work with agentic or multi-step reasoning systems. Contributions to evaluation frameworks, benchmarks, or open-source model tooling. Background in compilers, programming languages, distributed systems, or developer tooling. Research experience at top universities, labs, or advanced ML teams. Why This Role Is Exciting Work directly with cutting-edge LLMs and agentic tooling. Influence the direction of an emerging AI product with real-world impact. Solve some of the hardest problems in AI today: evaluation, grounding, reasoning, and autonomous coding. Join an elite team with deep experience in LLMs, distributed systems, and developer productivity tools. Massive opportunity for ownership, impact, and career growth. If you're passionate about AI for software engineering, love solving deep technical problems, and want to work at the frontier of LLM research, we'd love to hear from you.

JD for Mechanical Engineering, NPI.: Develop 3D Models, Assemblies & detail drawings using CAD tools Manage component Design, development and qualification activities with multiple suppliers, ensuring alignment on quality cost & Delivery timeline. Define technical interface requirement & Specification in collaboration with the Design team. Conduct on-site visits to supplier facilities to oversee manufacturing process validation & production readiness. Drive supplier accountability resolving DFM Issues & Coordinate with the supplier & testing team to keep validation activities on the schedule. Lead Mechanical Design & Build activities during the Concept, Proto, validation & Production build. Develop work instructions and document new products/tests, product design improvements, and process improvements. Generate and release part/assembly drawings and Bill of Materials into Agile PLM system. Strong Hands-on performing tolerance Stack-up, GD&T & Create EBOM, Prepare Engineering Documentation (DFM/DFA, DFMEA, PFMEA) Ability to independently manage projects. Required Qualification: Master's degree in Mechanical Engineering or related Field, 6+ years of experience in Mechanical / Manufacturing engineering preferably 3+ years in High Voltage Electromechanical Design & Engineering. Strong Proficiency in CAD tools Solid works (4+ years). Experience with GD&T Tolerance Stack-up analysis, Engineering Documentation & Supplier Coordination.

Previous Pharmaceutical/Biotech experience is mandatory for this role. MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and other Consulting services. MMR Consulting has offices in Canada, USA, and Australia. This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers and specialists involved in project management, commissioning and qualification, of equipment, systems and facilities. The work will require working out of the client's facilities in San Francisco Bay Area, California. This role is for Bioprocess Sr. C&Q Engineer role to work on the commissioning, qualification, startup of upstream and downstream bioprocess systems/equipment in the biopharmaceutical industry, as well as process equipment in pharma/biotech industries. The ideal candidate should possess leadership skills to lead/mentor intermediate/junior engineers. Responsibilities Provide technical guidance into the commissioning, qualification and start-up of various equipment and facilities used in life science manufacturing, such as bioreactors, tanks, CIP, Buffers, Media, Chrom, TFF, washers & autoclaves, etc. Lead the development of key qualification deliverables during the project lifecycle to ensure project is well defined, and the action plan to test the system is applicable and relevant. Lead qualification processes throughout the project lifecycle such as VPP, Risk Assessments, RTM, DQ, FAT, SAT, IQ, OQ and PQ as appropriate to ensure timely completion and to ensure all quality and engineering specifications are met. Prepare protocols, execute protocols, summarize data, resolve deviations, prepare final reports. Experience with C&Q of process equipment, utilities, facilities is an asset. Thermal Validation experience is an asset. Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, provide updates. Engage other departments, as required, for design reviews and decisions. Travel may be occasionally required for meetings with clients, equipment fabrication vendors or Factory Acceptance Testing (FATs). Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases. Client-management (maintain key Client relationships in support of business development and pursuit of new work), project scheduling/budgeting, coordination of client and MMR resources for effective project delivery, supporting business development (providing technical support to the sales as required for proposals/opportunities), presenting at industry conferences/publishing papers etc. Visit construction and installation sites following all site safety requirements. Other duties as assigned by client, and/or MMR, based on workload and project requirements. Qualifications 8-12+ years for years of experience in commissioning, qualification or validation of various systems within the pharmaceutical/biotech industry. Excellent written and spoken English is required including the preparation of technical documents in English Knowledge of requirements for a cGMP operations, including SOPs, Change Controls, Validation. Experience with developing and executing validation projects. Risk-Based Commissioning & Qualification approaches, such as ASTM E-2500 or ISPE ICQ, is considered an asset, but not required. Experience with commissioning and qualification of biotech process equipment (upstream or downstream or both), such as some, but not all, of the following: fermentation, bioreactors, downstream purification processes (chromatography, TFF, UF) is required Experience with commissioning & qualification of process control systems (i.e. PCS, SCADA, Historians) and building automation systems (i.e. Siemens Insight / Desigo, JCI Metasys) are considered an asset, but not required. Experience with Qualification or Validation of clean utilities, ISO clean rooms, and Thermal Validation is considered an asset. Experience with preparation and execution of URS's, DQ's, RTMs, Risk Assessments, CPPs, VPPs, FATs, SATs, IOQs, NCRs, Final Reports. Ability to lift 50 lbs. Engineering or Science degree, preferably in Mechanical, Electrical, Chemical, Biochemical, Electromechanical or a related discipline. Ability to handle multiple projects and work in a fast-paced environment. Strong multi-tasking skills Salary range: 100,000$ -145,000$ based on experience. Equal Employment Opportunity and Reasonable Accommodations MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

Project Engineer - Bridge & Transportation Construction We are partnering with a well-established heavy civil contractor specializing in transportation and bridge infrastructure to recruit a Project Engineer to support the delivery of multiple bridge construction projects across the Bay Area. This role is ideal for an engineer looking to deepen their experience on complex structural bridge work, gain exposure to large public works projects, and progress toward a Project Manager career path. Key Responsibilities Support the delivery of bridge construction projects, including foundations, substructure, superstructure, and deck scopes Assist with project planning, scheduling, cost tracking, and quantity takeoffs Manage RFIs, submittals, change orders, and document control Coordinate with superintendents, inspectors, designers, and subcontractors Track material procurement and subcontractor progress Support cost forecasting, budget updates, and project reporting Assist with quality control, safety compliance, and Caltrans/DOT documentation Participate in constructability reviews and preconstruction planning Required Experience & Qualifications 2-7 years of heavy civil construction experience, preferably on bridge or transportation projects Exposure to bridge structures (piles, footings, columns, decks, girders, falsework, etc.) Experience working on public works / Caltrans / DOT projects strongly preferred Bachelor's degree in Civil Engineering, Construction Management, or related field Strong organizational skills and attention to detail Ability to work in a fast-paced, field-driven environment Proficiency with construction software (Procore, Primavera, or similar preferred) Why This Opportunity Hands-on experience on high-profile Bay Area bridge projects Clear career progression into Project Manager or Senior Project Engineer roles Work alongside experienced bridge PMs and Superintendents Stable project pipeline in one of California's strongest infrastructure markets Competitive compensation and full benefits package

A fast-growing, deeply technical AI company is looking for a Research Engineer to join a small, high-performing team building the next generation of agentic LLM systems for software development. This is an opportunity to work at the frontier of AI, helping design and evaluate models that can understand, write, and reason about complex codebases. We are looking for someone who is passionate about AI for code, obsessed with understanding how LLMs behave, and excited to help push the boundaries of autonomous software engineering. What You'll Work On Design and run large-scale LLM evaluations, benchmarks, and experiments - particularly for code understanding and generation tasks. Build tools, datasets, and research frameworks that measure LLM reasoning, reliability, grounding, and hallucination reduction. Collaborate closely with product and engineering teams to improve model performance across real-world developer workflows. Work with frontier LLMs (across multiple providers) to analyze behavior, provide structured feedback, and drive improvements in accuracy, reliability, and autonomy. Prototype new capabilities for long-horizon agentic systems, including retrieval, planning, debugging, and automated coding workflows. Contribute to model fine-tuning and alignment work, including SFT, LoRA, DPO, or RLHF pipelines. Build production-quality research tools and evaluation pipelines that scale to real engineering environments. What We're Looking For 3+ years of experience in AI/ML engineering, research engineering, or similar fields. Strong coding fundamentals and comfort working in production environments (Python preferred). Hands-on experience with LLMs (training, fine-tuning, benchmarking, or evaluation). Experience with transformer architectures, retrieval-augmented generation (RAG), or reasoning-heavy LLM workflows. Deep interest in code generation, AI developer tools, or program synthesis (professional or personal projects). Ability to think rigorously about model behavior, failure cases, and reliability. Comfortable working in a fast-paced, highly collaborative environment with end-to-end ownership. Bonus Points Experience with AI systems for code: program synthesis, automated debugging, static analysis, code search, etc. Prior work with agentic or multi-step reasoning systems. Contributions to evaluation frameworks, benchmarks, or open-source model tooling. Background in compilers, programming languages, distributed systems, or developer tooling. Research experience at top universities, labs, or advanced ML teams. Why This Role Is Exciting Work directly with cutting-edge LLMs and agentic tooling. Influence the direction of an emerging AI product with real-world impact. Solve some of the hardest problems in AI today: evaluation, grounding, reasoning, and autonomous coding. Join an elite team with deep experience in LLMs, distributed systems, and developer productivity tools. Massive opportunity for ownership, impact, and career growth. If you're passionate about AI for software engineering, love solving deep technical problems, and want to work at the frontier of LLM research, we'd love to hear from you.

Previous Pharmaceutical/Biotech experience is mandatory for this role. MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and other Consulting services. MMR Consulting has offices in Canada, USA, and Australia. This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers and specialists involved in project management, commissioning and qualification, of equipment, systems and facilities. The work will require working out of the client's facilities in San Francisco Bay Area, California. This role is for Bioprocess Sr. C&Q Engineer role to work on the commissioning, qualification, startup of upstream and downstream bioprocess systems/equipment in the biopharmaceutical industry, as well as process equipment in pharma/biotech industries. The ideal candidate should possess leadership skills to lead/mentor intermediate/junior engineers. Responsibilities Provide technical guidance into the commissioning, qualification and start-up of various equipment and facilities used in life science manufacturing, such as bioreactors, tanks, CIP, Buffers, Media, Chrom, TFF, washers & autoclaves, etc. Lead the development of key qualification deliverables during the project lifecycle to ensure project is well defined, and the action plan to test the system is applicable and relevant. Lead qualification processes throughout the project lifecycle such as VPP, Risk Assessments, RTM, DQ, FAT, SAT, IQ, OQ and PQ as appropriate to ensure timely completion and to ensure all quality and engineering specifications are met. Prepare protocols, execute protocols, summarize data, resolve deviations, prepare final reports. Experience with C&Q of process equipment, utilities, facilities is an asset. Thermal Validation experience is an asset. Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, provide updates. Engage other departments, as required, for design reviews and decisions. Travel may be occasionally required for meetings with clients, equipment fabrication vendors or Factory Acceptance Testing (FATs). Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases. Client-management (maintain key Client relationships in support of business development and pursuit of new work), project scheduling/budgeting, coordination of client and MMR resources for effective project delivery, supporting business development (providing technical support to the sales as required for proposals/opportunities), presenting at industry conferences/publishing papers etc. Visit construction and installation sites following all site safety requirements. Other duties as assigned by client, and/or MMR, based on workload and project requirements. Qualifications 8-12+ years for years of experience in commissioning, qualification or validation of various systems within the pharmaceutical/biotech industry. Excellent written and spoken English is required including the preparation of technical documents in English Knowledge of requirements for a cGMP operations, including SOPs, Change Controls, Validation. Experience with developing and executing validation projects. Risk-Based Commissioning & Qualification approaches, such as ASTM E-2500 or ISPE ICQ, is considered an asset, but not required. Experience with commissioning and qualification of biotech process equipment (upstream or downstream or both), such as some, but not all, of the following: fermentation, bioreactors, downstream purification processes (chromatography, TFF, UF) is required Experience with commissioning & qualification of process control systems (i.e. PCS, SCADA, Historians) and building automation systems (i.e. Siemens Insight / Desigo, JCI Metasys) are considered an asset, but not required. Experience with Qualification or Validation of clean utilities, ISO clean rooms, and Thermal Validation is considered an asset. Experience with preparation and execution of URS's, DQ's, RTMs, Risk Assessments, CPPs, VPPs, FATs, SATs, IOQs, NCRs, Final Reports. Ability to lift 50 lbs. Engineering or Science degree, preferably in Mechanical, Electrical, Chemical, Biochemical, Electromechanical or a related discipline. Ability to handle multiple projects and work in a fast-paced environment. Strong multi-tasking skills Salary range: 100,000$ -145,000$ based on experience. Equal Employment Opportunity and Reasonable Accommodations MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.