Research and development engineer jobs in Westminster, CO - 936 jobs

General Atomics Electromagnetic Systems (GA-EMS) is a supplier of advanced electromagnetic systems, related power equipment and other high technology products for a variety of government and commercial applications. These include products such as the design and fabrication of linear motors, superconducting and conventional rotating motors, power inverters, high-energy capacitors, radiation monitoring systems, high-voltage direct current power distribution systems, and numerous other products. With limited direction, this position supports the manufacturing production process with focus on the design, development, and implementation of new or revised production processes for the efficient and economical fabrication of parts, components, sub-assemblies, and final assemblies. This position supports and helps to ensure the success of an AIT spacecraft build. DUTIES AND RESPONSIBILITIES: Plan, schedule, and support the execution of space systems manufacturing activities by leading small teams of satellite manufacturing engineers and technicians in executing assembly, integration, and test (AI&T) procedures. Oversee cleanroom operations, including contamination control protocols, configuration of workstations/bays, procurement of equipment and tooling, and coordination with facilities personnel for periodic maintenance. Provide input to systems engineers and design engineers to enhance manufacturability of satellite components, subassemblies, and mechanical ground support equipment (MGSE), tooling, and fixturing. Provide input to test engineers to optimize module-level and/or spacecraft-level test plans. Review lift plans, packaging, handling, shipping, and transportation procedures. Implement ongoing process and facilities operations development, including training of technicians and certification of production facilities. Review and provide input for manufacturing bills of materials, manufacturing work instructions, routers, and technical or programmatic documentation related to space vehicle assembly, integration, and test. Develop innovative and practical solutions to technical barriers. Identify, investigate, analyze and resolve complex and non-routine manufacturing engineering issues to keep production moving on schedule. Represent the Space Systems Manufacturing Team as the primary technical interface with GA-EMS program management, customers, and/or government regulatory agencies. Presents status reports and technical information at recurring weekly or monthly engineering and manufacturing meetings, and/or quarterly program reviews. Understand all applicable process, procedures and provide continual input to improve and streamline those processes. Maintain a productive and safe working environment in accordance with established operating procedures, workmanship standards, best practices, and all applicable regulations. Travel up to 25% as needed to support manufacturing needs. Perform other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Job Qualifications Typically requires a bachelors in engineering or a related technical field as well as nine or more years of manufacturing engineering experience. May substitute equivalent experience in lieu of education. Experience within Space Systems Industry highly desired. Multi-disciplinary engineering knowledge in mechanical, electrical, electronic, fluid, cryogenic, and optical systems is desired. Hands-on experience in assembly and integration of space vehicles in a cleanroom is a plus. Working knowledge of test equipment including Thermal Vac Chambers, Vibe Tables is a plus. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication and interpersonal skills are required. Must be able to effectively use MS Office, specifically Excel and Project applications, to execute and track work activities. MS Teams experience is desirable. Must be able to work both independently and in a team environment. Able to work extended hours as required. Travel is required and operations are on a 9X80 schedule with every other Friday off.

We are seeking an Entry Level Mechanical Engineer to become a part of our team! You will be required to perform a variety of engineering tasks. This position is an onsite role. Responsibilities: Drafting and Designing Reviews with the team and customers Qualifications: Bachelors Degree in Mechanical Engineering GPA of 3.5 or higher Strong problem solving and critical thinking skills Ability to prioritize and multitask

🚧 Now Hiring: Sr. Project Engineer | Gilmore Construction | Denver, CO Gilmore Construction is looking for a skilled Sr. Project Engineer to join our growing team! This is an exciting opportunity to lead impactful commercial construction projects across Colorado while working in a collaborative and inclusive environment. About the Role: In this full-time position, you will direct and coordinate all aspects of the project lifecycle-from preconstruction through closeout. You'll oversee budget, schedule, safety, quality, and team management to ensure successful delivery for our clients. We are especially interested in candidates with strong MEP coordination experience. Experience in data center construction or other mission-critical environments is a plus. Key Responsibilities: Lead day-to-day project operations, including planning, scheduling, and team leadership Manage contracts, budgets, subcontractors, and project documentation Ensure compliance with QA/QC and safety standards Foster client, architect, subcontractor, and vendor relationships Coach and mentor Project Engineers Qualifications: 5+ years in commercial construction, with at least 3 years in a Project Engineer role Deep knowledge of building systems and construction methods-especially MEP systems Experience with commercial construction; data center experience strongly preferred Proficiency with Procore and Microsoft 365/Copilot OSHA 30, Lean Construction, CPR/First Aid certifications (or willingness to obtain) Why Gilmore Construction? SBE, DBE, and MBE-certified general contractor 28 years of building Colorado's most meaningful projects Small, family-owned team of ~50 employees Committed to mentorship, community giving, and small business advocacy Join a team where your work has purpose-and your career has potential. 📩 Apply today or message us directly to learn more!

Nippon Sanso Matheson is a specialized gas equipment manufacturer for DUV, EUV, and purification systems for a variety of industries. The Manufacturing Engineer at Nippon Sanso Matheson will work with multiple disciplines to build, integrate, and test purification for toxic and non-toxic gases, and high- and low-pressure gas handling systems. This is an all-encompassing role to take designs through production and beyond. The ideal candidate will have hands-on experience with building mechanical structures, working in a team environment, and have good technical writing skills. Production Responsible for program module builds, following all builds from sub-assembly to final assembly to meet delivery deadlines. Develop, write, review, and implement manufacturing plans, production travelers and SOPs Ensure the product meets all customer requirements and travelers capture all required data Work directly with technicians and the production floor supervisors on product builds Help train technicians on processes and procedures Assist in the planning, development and implementation of manufacturing and quality activities Design Review Designs and Design changes for manufacturing Evaluate proposed designs for DfM, provide feedback to design team for manufacturability. Quality Drive non-conformances into actionable work and system improvements Assist in company-wide operational excellence projects and activities Procurement Develop and maintain relationships with specialty manufacturers and service bureaus in our supply chain Work with Procurement to meet the needs of inventory ordering and delivery Track and manage open inventory orders to ensure production is on time Manage inventory inspections and verification, and ensure products meet the requirements prior to being issued to the floor. Required Qualifications and Skills Bachelor's degree in engineering, Engineering Technology or other science related fields 1-4 years' experience Good written and verbal communication skills Must be eligible to work in the US Working knowledge of ISO9001-2015, ISO14001 Desired Skills Bachelor's degree- Engineering Discipline preferred Experience with gas handling system fabrication and test Experience with non-conformance resolution Experience with manufacturing process development Hands-on building Working in a clean room environment Working knowledge of ISO9001-2015, ISO-9001-IATF 16949, AS9100, ISO14001. Supplier Quality Engineering background Salary $85,000-$120,000, exact salary to be determined by the education, experience level, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. Benefits 401(k) Retirement savings plan 401(k) Company matching & safe harbor contribution Health insurance Dental Insurance Vision insurance Health savings account & flexible spending account 8 Company holidays per year 3 Floater holidays per year. Paid time off - 2 weeks' vacation and one week sick time Paid Parental leave Scholarship Program Life Insurance Disability insurance Bereavement Leave Employee Assistance Program Additional benefits such as critical illness insurance, accident insurance, hospital indemnity insurance, legal insurance, pet insurance, and identity theft. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for long periods of time. The employee is occasionally required to stand, bend, reach, and walk. The position requires some physical effort. This would require the ability to lift or move objects up to 50 pounds. Duties will include working in a clean room environment and in environments exposed to chemicals. Nippon Sanso Matheson is a drug-free workplace and an Equal Employment Opportunity (EEO)/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, veteran status or any other protected factor. Nippon Sanso Matheson is committed to providing access, equal opportunity and reasonable accommodations for individuals with disabilities in employment, its services, programs, and activities Job Type: Full-time Pay: $85,000.00 - $120,000.00 per year Experience: Manufacturing engineering: 2 years (Preferred) Shift availability: Day Shift (Preferred) In office position. Ability to Commute to Longmont, CO.

The Sr. Project Engineer will collaborate with the Company Project Managers, Superintendents, Field Staff, and Executive Staff to ensure the successful completion of construction projects. In addition, the Sr. Project Engineer will act as a liaison with Owners, Architects, Engineers and Tenants regarding project feasibility, cost, scheduling, completion, and close-out on assigned construction projects both public and private.This position is also responsible for design development participation pre-construction/estimating activities.The Sr. Project Engineer is responsible for maintaining constant and effective communications with team members, both internal and external as well as customers. Responsibilities for the Sr. Project Engineer will include the following: Estimating/Pre-Construction (assist estimators with the following when required): Send projects to sub-contractors for bids. Develop prospective project instructions to bidders. Coordinate with all bidding sub-contractors to ensure proper coverage for projects bidding. Coordinate with other Project Managers, Estimators and Superintendents to develop estimate spreadsheets. Develop proposal package for timely submission to clients. Project Management (collaborate with Project Managers to assist with the following): Manage day-to-day communications on projects to ensure projects are delivered on time and on budget. Assist Project Manager in reviewing, tracking and processing change orders on multiple projects. Coordinate with Project Managers and Superintendents as required to execute assigned tasks for coordinating scheduling with sub-contractors. This includes tracking material procurement to ensure on time deliveries. Manage all project-based paperwork including and not limited to; RFI's, submittals, contracts, change orders, sub-contractor, and estimates. Assist in obtaining and tracking project permits and inspections. Obtain all required close-out documents including record drawings, O&M's and warranties. Supervision (collaborate with Superintendents to assist with the following): Coordinate with Site Superintendents Create and assist Superintendent in tracking completion of punch list and warranty work. Knowledge and Experience: Four-year Construction Management degree required. Three years' experience as a Project Engineer. Knowledge of project management principles for building construction; theory, principles and practices of engineering and architecture related to design and construction. Knowledge of fundamentals of mechanical, electrical, structural and civil engineering systems. Knowledge of all applicable local and international codes. Skills and Abilities: High drive to succeed coupled with excellent organizational, interpersonal communication skills and drive to be a leader. Ability to quickly consume and master project contract documents. Ability to problem solve and process information in a timely manner. Ability to plan, direct, and coordinate professional and sub-professional project teams. Ability to manage time and prioritize tasks to manage multiple projects concurrently. Strong computing skills to run design software, project management software, scheduling software and basic office software packages. High desire to train and provide knowledge to peers to promote growth in the company. Requirements: Must have a valid Colorado Driver's License Must have a clean criminal record for work in educational facilities. Interested candidates please send resume and cover letter to *************************

A modern financial technology company is seeking a Staff Applied AI and Machine Learning Engineer in Seattle. You will lead the development of machine learning models to enhance risk management within a primarily payments-focused environment. Ideal candidates have over 8 years of experience in data science, expertise in statistical analysis, and strong programming skills in Python or R. This role requires effective communication and collaboration across diverse teams, offering an opportunity to make a significant impact on product development. #J-18808-Ljbffr

In addition to the responsibilities listed below, this position is responsible for performing standard corrective repairs, preventive maintenance, and acceptance testing on all medical instrumentation; ensuring medical instrumentation is calibrated at the appropriate interval with supervision from a manager; and performing installations of standard medical instrumentation. Essential Responsibilities: Pursues effective relationships with others by sharing resources, information, and knowledge with coworkers and members. Listens to, addresses, and seeks performance feedback. Pursues self-development; acknowledges strengths and weaknesses based on career goals and takes appropriate development action to leverage / improve them. Adapts to and learns from change, challenges, and feedback; demonstrates flexibility in approaches to work. Assesses and responds to the needs of others to support a business outcome. Completes work assignments by applying up-to-date knowledge in subject area to meet deadlines; follows procedures and policies, and applies data and resources to support projects or initiatives with limited guidance and/or sponsorship. Collaborates with others to solve business problems; escalates issues or risks as appropriate; communicates progress and information. Supports the completion of priorities, deadlines, and expectations. Identifies and speaks up for ways to address improvement opportunities. Ensures that documentation is adequately maintained by: documenting ones action (e.g., maintenance, repairs, part replacement) in the centralized maintenance management system with minimal guidance and monitoring; documenting standards, procedures and protocols for all major processes and upholding all standards with limited oversight; and maintaining adequate parts of inventory for medical devices and software with limited oversight. Conducts ongoing preventative maintenance of medical equipment by: performing routine inspections and functionality tests of standard medical equipment (e.g., integrated, interoperable) medical devices and software with some direction; assisting with scheduled preventative maintenance of medical equipment and software (e.g., replacing parts) while exercising judgement and discretion; responding to straight forward requests for maintenance that may require judgment and discretion; and maintaining basic awareness of the status of ongoing preventative maintenance activities, problems, and concerns. Minimum Qualifications: Associates degree or vocational certificate in Electronic Service, or related field AND Minimum one (1) year of experience in medical technology field service with medical devices and systems or a directly related field OR Minimum two (2) years of experience in technology field service, or a directly related field. Additional Requirements: Preferred Qualifications: One (1) year of experience in field service of medical instrumentation. Certificate of Vendor Training involving directly related systems. Primary Location: Colorado,Aurora,Central Support Scheduled Weekly Hours: 40 Shift: Day Workdays: Mon, Tue, Wed, Thu, Fri Working Hours Start: 07:30 AM Working Hours End: 04:00 PM Job Schedule: Full-time Job Type: Standard Worker Location: Onsite Employee Status: Regular Employee Group/Union Affiliation: NUE-PO-01|NUE|Non Union Employee Job Level: Individual Contributor Department: Central Support Services - Clinical Tech Repair Depot - 0308 Pay Range: $34.9 - $45.16 / hour Kaiser Permanente is committed to pay equity and transparency. The posted pay range is based on possible base salaries for the role and does not include the value of our total rewards package. Actual pay determined at offer will be based on years of relevant work experience, education, certifications, skills and geographic location along with a review of current employees in similar roles to ensure that pay equity is achieved and maintained across Kaiser Permanente. Travel: No On-site: Work location is on-site (KP designated office, medical office building or hospital). Worker location must align with Kaiser Permanente's Authorized States policy. Kaiser Permanente is an equal opportunity employer committed to fair, respectful, and inclusive workplaces. Applicants will be considered for employment without regard to race, religion, sex, age, national origin, disability, veteran status, or any other protected characteristic or status. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: TS/SCI without Polygraph At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. We have an exciting opportunity for a Senior DevSecOps Engineer to join our high-impact team supporting a mission-critical program within the Space Intelligence, Surveillance, and Reconnaissance (SISR) business unit. We're seeking an Engineer who can bring their development fundamentals, a passion for automation, and hands-on expertise in Groovy-based CI/CD pipelines, Linux operating systems, and cloud-native container orchestration. You will help design scalable systems, optimizing CI/CD pipelines, ensure infrastructure reliability, and foster a culture of collaboration between Development, QA, and Operations. What You Will Do Design, implement, and manage CI/CD pipelines to support frequent, reliable software deployments at a medium-sized enterprise scale. Build and deploy containerized applications using Docker and Helm; troubleshoot issues in Kubernetes at the application level. Monitor and improve system performance, uptime, observability, and disaster recovery readiness in both local and hybrid cloud environments. Collaborate with development, infrastructure, and IA teams to optimize performance and standardize secure DevOps workflows. Participate in incident response, root cause analysis, and resolution for CI/CD and deployment pipeline issues. Evaluate and integrate new tools and technologies to support automation, vulnerability scanning, and secure build practices. Help establish DevSecOps best practices and infrastructure-as-code (IaC) standards across the program. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience. Experience writing and maintaining CI/CD pipelines at a medium-sized enterprise scale; includes integration of Java-based applications and scripting in Python or Bash. Experience building, deploying, and maintaining containerized applications using Docker or Helm, with experience to perform Kubernetes application-level debugging (e.g., troubleshooting pods, services, and Helm deployments). Active and transferable U.S. government issued TS/SCI security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer Experience using a compiled programming language such as Java (preferred) to build or maintain large-scale software systems, and at least 2 years of experience using a scripting language like Groovy (preferred) for writing automation scripts or CI/CD pipelines (e.g., Jenkins files). Experience managing package repositories such as Artifactory or Nexus, including the use of Maven, Helm, Docker, or YUM for custom package creation and mirroring in air-gapped or restricted environments. Scripting skills in Bash, Python, or Go CompTIA Security + Experience with Agile principles, to include Agile systems engineering practices and understanding of Agile roles Technical leadership or team lead experience Good oral and written communication skills as well as good collaboration skills and the ability to work in a team environment What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation Learn More & Apply Now! Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Welcome to Raytheon in Aurora, CO Clearance Information: This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ RTX Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses - Collins Aerospace Systems, Pratt & Whitney, and Raytheon. Its 185,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA. This requisition is eligible for an Employee Referral Award. ALL eligibility requirements must be met to receive the referral award. #LI-TR1 As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

A tech company focused on small business solutions is seeking a Mobile iOS Engineer to architect and refine its iOS app. The role demands extensive Swift experience and collaboration with cross-functional teams to enhance user experiences. Candidates should have a strong foundation in iOS software engineering and be passionate about delivering impactful solutions for small business owners. This position is based in San Francisco, part of a hybrid work environment. #J-18808-Ljbffr

Metalworks Manufacturing Engineer I organizes the work being performed through an in-house technology platform. This includes data collection and communication with a variety of sources and data input, plus estimating. The ME also plays a key role in productivity, quality, and safety in our manufacturing operations by utilizing knowledge of product design, fabrication, manufacturing methods and quality control standards. Principal Duties and Accountabilities: Continuing Education: The MPE will demonstrate the ability to continuously learn the complex attributes of Mechanical Construction, Manufacturing and LEAN processes and Estimating/Productivity in order to help the Metalworks team achieve its operational goals. Safety and Quality: Demonstrates a passion to learn safety and quality programs and assist other Metalworks roles in executing Safety and Quality events. Culture: Be the best version of oneself in alignment with USE Company Holdings Cultural Norms. Performance (technical abilities): Facility support: The MPE will play a role in helping the office leadership research and solve operational challenges with the facility and grounds, including functional changes throughout the manufacturing processes. Project organization requires clear communication and interpretation of project information for processing in order to get timely, accurate data to other Metalworks team members. This includes complex, technical information that may require research and problem solving. Estimating: Standard labor tables are leveraged (MCAA + SMACNA) to generate labor estimates based on agreeable rates and target productivity, which can be complicated and technical. Non-Standard work activities are identified and priced accordingly. Education: B.S. degree in engineering or construction management preferred. Experience: 1 or more years of job-related experience. Possesses general knowledge of commercial/industrial mechanical systems, fabrication, and installation. General knowledge of manufacturing operations is a plus. Knowledge, skills, and abilities: Handles basic issues and problems and refers more complex issues to higher-level staff. Knowledge of a manufacturing environment. Ability to establish and analyze metrics. Keen ability to identify and solve problems. Knowledge of a wide range of construction materials, methods, and techniques. Strategic thinking and effective problem-solving skills. Keeps "One Company" focus. Effective time management skills to prioritize tasks, meet deadlines, and balance competing priorities. Proficiency with MS Office Suite. Ability to adapt effectively to changing priorities and deliver results. Ability to be self-motivating and constantly be seeking to gain knowledge of new technical practices in the controls industry. Ability to aid multiple issues simultaneously. Ability to speak clearly and exercise good judgment. Ability to work under pressure. Keen ability to pay close attention to details, specifications, and quality standards. Ability to evaluate different options and choose the most appropriate course of action. Ability to effectively convey information, provide technical guidance, and contribute to team discussions. Detail-oriented with the ability to prioritize tasks and manage multiple projects. Physical and/or travel demands: Work will be done in a combination of environments; includes the manufacturing floor, office setting, job sites, etc. Requires frequent sitting, standing, walking, keyboarding, use of monitor and telephone. Occasional climbing, reaching, stooping and lifting required. Travel requirements: An occasional flight and overnight stay may be required, as well as road travel required to effectively execute the needs of this regional role. Benefits and Compensation: The range for this position has been established at $67K to $75K per year and is U.S. Engineering's good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be based on a variety of factors, including but not limited to internal equity, experience, education, specialty, and training. Compensation for this role includes a base salary complemented by commission opportunities based on the Account Manager's individual sales performance and attainment of sales targets Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package, including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line. This position will be posted until December 26th, 2025. To apply, please visit **************************************************** Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. Do you believe no challenge is too complex to solve? You'll fit right in at U.S. Engineering. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients' goals.

Our client is a long-established electrical construction contractor delivering large-scale commercial and industrial projects across Colorado. With more than a century of experience, they support complex infrastructure work through strong project controls, safety-first execution, and close collaboration between field and office teams. As a Project Engineer, you'll support senior project managers on active electrical construction projects from pre-construction through closeout. You'll play a key role in coordinating documentation, tracking materials, and supporting field execution to help keep projects on schedule and within budget. Responsibilities & Requirements • Coordinate and track RFIs, submittals, and project documentation • Manage OFCI submittals and assist with material buyouts and material tracking • Support cost tracking, schedules, and change management • Work closely with PMs, superintendents, vendors, and subcontractors • Read and interpret construction drawings and specifications • What They Offer • Salary range: $80,000-$105,000, depending on experience • Track to becoming a Project Manager • Company vehicle and fuel card • Comprehensive benefits, 401(k) with match, and paid time off • Long-term stability with ongoing project opportunities across Colorado No sponsorship available. Only US Citizen and Green card holders at this time.

This position resides in the Process Operations team in the Process Development department and drives robustness and consistency in the laboratory through execution and innovation of laboratory practices. They drive efficiencies in Process Development while maintaining ownership of the laboratory and systems. They will have the responsibility of being operations leads on projects with increasing ownership and collaboration within the department. Through defined roles and responsibilities, the process operations team will be subject matter experts (SMEs) on both the execution of processes as well as the systems in the laboratory. The Process Development Associate supports and executes laboratory studies within the KBI Process Development organization at KBI under general supervision. The Process Development Associate is able to execute lab work, with documentation and reporting that is consistent with Process Development compliance and Quality standards. The Process Development Associate is able to author basic operational documents for routine unit operations within the laboratory organization. The Process Development Associate is capable of executing lab studies from written documents and applies standard scientific approaches to solving technical problems. The Process Development Associate may serve as the point of contact for a specific laboratory project. The Process Development Associate works under the general supervision of laboratory management with work reviewed for soundness and accuracy. The Process Development Associate will have a basic understanding of Process Development methods/unit operations as well as scientific principles in order to execute lab studies. The Process Development Associate will have the ability to execute laboratory experiments from written/verbal instruction. Basic technical writing and communication skills are desired. Basic understanding of laboratory equipment and equipment maintenance are required. The Process Development Associate participates in process development meetings and technical investigations if needed. Experience in various stirred tank fermentations (single-use and stainless), chromatography, precipitation, and filtration methods are highly preferred. The Process Development Associate will assist in the evaluation, development and implementation of new technologies leading to process improvements and efficiency of operations. The Process Development Associate will identify and implement continuous operation improvement ideas as a major part of this role. KBI Biopharma, Inc. is an EEO/AA employer and actively seeks to diversify its work force. Therefore, all qualified applicants, regardless of race, color, national origin, religion, gender, gender identity, sexual orientation, age, disability or veteran status, are strongly encouraged to apply. I understand that neither the completion of this application nor any other part of my consideration for employment establishes any obligation for KBI Biopharma, Inc. to hire me. If I am hired, I understand that either KBI Biopharma, Inc. or I can terminate my employment at any time and for any reason, with or without cause and without prior notice. I understand that no representative of KBI Biopharma, Inc. has the authority to make any assurance to the contrary. I attest with my signature below that I have given to KBI Biopharma, Inc. true and complete information on this application. No requested information has been concealed. I authorize KBI Biopharma, Inc. to contact references provided for employment reference checks. If any information I have provided is untrue, or if I have concealed material information, I understand that this will constitute cause for the denial of employment or immediate dismissal.

We are seeking a Principal Optics Engineer in our Broomfield, CO Location. Key Responsibilities: * Work with the Architecture team to define future generations of quantum computers. * Act as a consultant to laser and beamline contractors and/or internal development teams and lead the development of subassembly requirements from higher level requirements. You will ensure that requirements are understood, mutually compatible, and well-formed. * Support Systems Engineering in developing verification plans for lasers and optical subsystems * Gather project requirements, turn them into action plans, and ensure the team completes tasking on-time with proper prioritization * Provide technical expertise to laser and optical projects with the goal of maximizing performance, robustness, and scalability * Mentor team members on technical and scientific topics * Integrate complex, high precision optical sub-assemblies into higher level systems and maintain them * Travel up to 25% to support development partnerships YOU MUST HAVE: * Bachelor's Degree minimum * Minimum 10+ years' experience (advanced degree inclusive) using, maintaining, and designing optical, opto-mechanical and/or laser systems: Laser systems expertise must include experience with fiber optic components, electro-optic and acousto-optic modulators, and noise-reduction servos. * Due to Contractual requirements, must be a U.S. Person. defined as, U.S. citizen permanent resident or green card holder, workers granted asylum or refugee status * Due to national security requirements imposed by the U.S. Government, candidates for this position must not be a People's Republic of China national or Russian national unless the candidate is also a U.S. citizen. WE VALUE: * Ph.D. or Masters in Optics, Physics, Applied Physics, or related field preferred * Experience characterizing, stabilizing, and servoing diode, fiber, and/or Ti:Sapphire lasers * Experience leading and mentoring small (2-5 people) technical teams through design, prototype, testing, alignment and final deliverable for novel optical assemblies * A demonstrated history of mentoring junior scientists * Broad understanding of optical principles and practices and intimate knowledge and experience applying this knowledge to projects * Experience with Zemax and/or Solidworks/CAD for designing optical and optomechanical systems * Experience with data analysis (taking, plotting, analyzing, fitting and interpreting relevant data from optical testing experiments) * Experience with Design for Manufacturing and Design for Cost * Experience with engineering change documentation; ability to work from assembly drawings, schematics, wiring diagrams, sketches and other written, visual and oral instructions $192,000 - $240,000 a year Compensation & Benefits: Incentive Eligible - Range posted is inclusive of bonus target when applicable The pay range for this role is $192,000 - $240,000 annually. Actual compensation within this range may vary based on the candidate's skills, educational background, professional experience, and unique qualifications for the role. Quantinuum is the world leader in quantum computing. The company's quantum systems deliver the highest performance across all industry benchmarks. Quantinuum's over 650 employees, including 400+ scientists and engineers, across the US, UK, Germany, and Japan, are driving the quantum computing revolution. By uniting best-in-class software with high-fidelity hardware, our integrated full-stack approach is accelerating the path to practical quantum computing and scaling its impact across multiple industries. As we celebrate the International Year of Quantum, there has never been a more exciting time to be part of this rapidly evolving field. By joining Quantinuum, you'll be at the forefront of this transformative revolution, shaping the future of quantum computing, pushing the limits of technology, and making the impossible possible. What is in it for you? A competitive salary and innovative, game-changing work Flexible work schedule Employer subsidized health, dental, and vision insurance 401(k) match for student loan repayment benefit Equity, 401k retirement savings plan + 12 Paid holidays and generous vacation + sick time Paid parental leave Employee discounts Quantinuum is an equal opportunity employer. You will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. Know Your Rights: Workplace discrimination is illegal We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

At Atom Computing, we build quantum computers using arrays of optically trapped neutral atoms that will empower customers to achieve unprecedented computational breakthroughs. Join a world-class team of scientists, engineers, and business professionals to advance the state-of-the-art in quantum computing. Atom Computing is seeking an Optical Engineer to help lead the design of opto-mechanical subsystems and to help build them out and develop fixtures and processes for their precision alignment and assembly. Job Requirements Partner with mechanical engineers and physicists to iteratively design optical subsystems in the areas of laser distribution, high numerical aperture microscope imaging, and optical cavities Analyze and make recommendations to the engineering team for balancing competing requirements Create novel designs and specifications of optical systems and subsystems from the component level up to the system level Evaluate suitability of design solutions by performing detailed tolerance and stray light analysis Develop alignment procedures for optical designs Assist in hands-on assembly and precision alignment of finalized optical designs Characterize the performance of optical subsystems Experience & Education Bachelor's degree in Optical Sciences or Optical Engineering, advanced degree a plus 5+ years optical design experience 2+ years of hands-on optics assembly experience in a laboratory environment Qualifications Experience with Fourier Optics, flat field relay optical systems, and telecentric imaging Experience in the design of high-numerical-aperture imaging systems Experience with Zemax, FRED, or equivalent ray-tracing software Experience with Onshape, Solidworks, or equivalent 3D CAD design software Understanding of optical cavities, a plus High attention-to-detail and accuracy Creative, critical thinking with ability to strategize and solve problems in a dynamic environment Ability to work effectively in an open, collaborative environment Excellent communication, listening and people skills Atom Computing provides a wide variety of perks and benefits, including fully paid medical, dental, and vision insurance for our employees and their dependents. Additionally, unlimited paid time off, 401K company matching, short- and long-term disability, FSA, dependent care benefits, and life insurance. We also offer drinks, snacks, and catered team lunches in our offices, every day! The base salary range for this position is between $120,000 - $145,000, commensurate with experience. In addition to salary, we offer an annual bonus and equity in the company.

HJ Staffing is seeking a Professional Application Designer to design, develop, install, test, and document complex applications software, including server, client, and web components. In this role, you will bridge the gap between application architects and development teams, ensuring that technical architecture solutions are scalable, cost-effective, and aligned with customer specifications. You will function as a domain expert, providing leadership and work guidance to less experienced personnel to enhance overall product quality What You Will Do Design & Development: Provide high-level design documents and translate them into component-level designs to accelerate the development of flexible, reusable components Technical Liaison: Act as the primary liaison between application architects and development teams to ensure seamless coordination during product implementation Research & Evaluation: Assist in technical research and evaluate tools and methodologies to ensure designs adhere to industry, client, and company standards Documentation & Testing: Develop comprehensive technical documentation and oversee test-plan development, integration, and deployment phases. Collaboration: Participate in joint applications development (JAD) sessions and project meetings to communicate design decisions across departmental personnel Mentorship: Provide leadership and work guidance to less experienced developers, ensuring all application designs meet strict specifications What You Will Bring: Education: Bachelor's degree in Computer Science, Software Engineering, Business, or a related field (or an equivalent combination of education and experience). Experience: 3+ years of experience in product design and support, with a strong background in the Software Development Life Cycle (SDLC) and various development methodologies. Technical Mastery: Proven experience with product systems design principles, appropriate programming languages, operating systems, hardware, and software Process Knowledge: Familiarity with company application development policies, procedures, and industry-standard coding documentation. You Will Be Successful If: Analytical Mindset: You possess strong problem-solving and creative thinking skills applicable across multiple product suites. Good Communication: You can effectively translate complex technical requirements for developers, customers, support personnel, and management Agility: You have the ability to handle multiple tasks simultaneously and switch between priorities quickly in a fast-paced environment. Collaborative Spirit: You thrive both when working independently and as a proactive member of a cross-functional team. Important Details Eligibility: Candidates must be a US Citizen or Green Card Holder. Schedule: Preferred availability is Monday-Friday, 8:00 AM - 5:00 PM Mountain Time (MT) Remote Status: This is a remote-friendly position focusing on digital transformation and scalable architecture.

Be one of the Bedo 100 Albedo is making Very Low Earth Orbit (VLEO) mainstream, building the infrastructure to usher every satellite mission set into this new orbital domain. We build buses, integrated satellites, and turnkey missions for customers to thrive in VLEO, between 200 km - 400 km, where proximity compounds performance & drag self-cleans debris. As part of the first 100 employees at Albedo, you will have a big impact on Albedo's trajectory to proliferating VLEO - whether you're advancing hardware to increase satellite longevity, scaling production for large constellations, building next-gen flight and ground software to push performance, or enabling missions that matter for national security and our day-to-day life here on earth. How We Operate: Albedo takes a first-principles approach - in space and in business. We move with speed, take calculated risks, and learn quickly. We use AI regularly to create leverage in every discipline across the company. We work in-person at our Broomfield CO HQ to maximize team & company productivity. We work hard & with urgency to compound our first-mover advantage. Who We're Looking For: Builders who want to own outcomes, not tasks. Systems thinkers who balance precision with iteration while thinking about the big picture. Individuals who are energized by creating a category rather than competing in an existing one. You'll join a team that has already proven what others said wasn't feasible and is now scaling & upgrading our VLEO buses & payloads to serve mission sets across sensing, communications, and responsive operations. If you can feel the excitement running through your veins, apply to be one of the Bedo 100.Compensation and Benefits: Employee friendly equity compensation 4% direct matching 401k Health Insurance: 100% employee coverage & 75% dependent coverage Parental leave and childcare coverage Flexible vacation and sick time from day one 12 company holidays $100 monthly wellness benefit Relocation package if not based in Denver What You'll Do: Responsible for optical modeling and sensitivity analysis Converting all low-level wavefront error (WFE) contributions of opto-mechanical design into WFE budget. Working with the opto-mech designers to map the non-perfect aspects of their designs into rms WFE space from mechanical space including thermal-structural dynamics. Identify terms we cannot quantify at various levels of assembly and determine impact/path forward to ensure design closes with integration. Responsible for set-up optical analysis results of structural-thermal-optical performance analysis (STOP) with inputs from thermal and structural engineering Responsible for interpretation and analysis of STOP results to and sensitivity analysis to determine next steps in design iteration Work with team to understand details of design causing results and iterate to optimize the design Obscuration analysis for opto-mechanical design and as-built Line of Sight sensitivity matrix analysis for opto-mechanical design and as-built Field Angle Map (distortion) analysis for opto-mechanical design and as-built Develop and perform Monte Carlo WFE prediction from current RSS WFE prediction Manage WFE budget as design progresses to re-allocate terms which can and cannot meet original allocation Responsibly recommend re-allocation of WFE margin as design matures Create optical performance merit function(s) for existing system design WFE accounting for the 1g ground test “mission" and associated uncertainty, each of the different major alignment step missions, and the post-environmental test mission, in addition to the normal 0g mission Produce overall predicted system WFE maps, and in working with alignment lead engineer, including step-by-step expectations per alignment plan - Including 1g to 0g analytical prediction Analyze AIT environmental impacts to alignment measurement error Your Ideal Skills and Experience: 5-10+ years of experience working optical system analysis and optimization Familiarity with various optical design and analysis software tools Deep understanding of optical sensitivities, aberrations and what effects them in mechanical design/implementation Experience with WFE budgets, allocation and budget management Experience with STOP modeling and the iterative, multi-disciplinary process Hands on experience optimizing optical systems to reduce aberrations and WFE Regularly uses AI tools as essential leverage to accelerate work, improve clarity, and multiply output Albedo does not accept agency resumes. Please do not forward resumes to Albedo employees. Albedo is not responsible for any fees or overhead related to unsolicited resumes. Additional Requirements: In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All persons hired will be required to be a U.S. citizen, a lawful permanent resident of the U.S., or protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Opportunity Employer/Veterans/Disabled: Albedo is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. Know Your Rights || Pay Transparency Nondiscrimination Provision Relocation: Relocation for this position is available US CITIZENSHIP IS REQUIRED #LI-Onsite

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world's largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco's value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations' spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom's vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking a Rotating Equipment Engineer to join our Unconventional Resources Producing Department (URPD) within the Unconventional Resources organization. The Unconventional Resources Producing Department (URPD) is responsible for operating and maintaining Unconventional Resources (UR) surface facilities, ensuring the safe and efficient production of hydrocarbons. The department plays a critical role in the overall success of the UR program. Your primary role is to provide professional advice and guidance regarding mechanical/rotating equipment systems, schemes, equipment, or techniques, facility designs, and solutions to operating and maintenance problems. Key Responsibilities As the successful candidate you will be required to perform the following: Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix rotating equipment and mechanical systems. Develop engineering design packages for new installation and upgrade projects, including development of work scopes, calculations, and detailed technical specifications. Review Project Proposals and Detailed Designs packages for new facilities. Participate in the testing and commissioning of new facilities and Turnaround and Inspection (T&I). Update and maintain engineering documentation and drawings. Analyze system performance and find solutions for Energy saving. Ensure quality, cost-effective, and timely solutions to any upgrade. Test and pilot new technologies. Ensure full HSE Compliance. Report and analyze key performance indices. Develop and implement reliability programs. Make recommendations for technical/economic optimization of existing facilities. Lead feasibility/profitability studies for new facilities. Provide analysis, evaluation, and interpretation in support of projects, processes, and financing related to Saudi Aramco capital investment decisions. Minimum requirements As the successful candidate you will have: Bachelor's degree in Mechanical Engineering from an accredited university; a Master's degree is preferred. You will have 15 years of working experience, including 10 years of experience in industrial operation facilities, with a preference for experience in Shale gas facilities and Modular skids mounted units. You must be conversant and have working knowledge of industry codes and standards, such as ASME and API, including API-STD-610 and 617. You will have experience with: Creating/modifying PFDs and P&IDs, Troubleshooting and major repair of oil and gas rotating equipment, creating schematics and piping diagrams, conducting failure analysis and providing recommendations for failed rotating equipment, Rotating equipment and piping field Installation, Commissioning, and testing, Specifying piping and equipment layout. Capable of communicating with multidiscipline engineers to complete projects and have proven ability to communicate effectively with management at all levels within the organization. Able to spot and reconcile conflicting views and interests among different parts of the organization. Strong written and oral communication skills, able to communicate what are frequently complex technical, economic, and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds. Able to work effectively with the minimum of supervision on relatively unstructured tasks and be a hands-on person who will immediately command the professional respect of others who possess long-time practical experience of working in or serving the industry. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential. You will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, you will have experience in mechanical design review, construction, commissioning, and testing activities for new shale gas facilities. Work Location and Work Schedule Work location: Within Saudi Arabia - To be specified in Job offer Work schedule: Full Time - To be specified in Job offer Job Posting Duration: Job posting start date: 12/15/2025 Job posting end date: 12/15/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world's biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs - one of the largest in the world.

Staff Applied AI/ML Engineer - Customer Experience Platform At Gusto, we're on a mission to grow the small business economy. We handle the hard stuff-like payroll, health insurance, 401(k)s, and HR-so owners can focus on their craft and customers. With teams in Denver, San Francisco, and New York, we're proud to support more than 400,000 small businesses across the country, and we're building a workplace that represents and celebrates the customers we serve. Learn more about our Total Rewards philosophy. About the Role: Gusto's Data team leverages Gusto's rich dataset to guide product direction and decision‑making by building the right AI/ML solutions at scale. For this role, we are looking for a technical leader (an individual contributor) to drive the scale and optimization of our customer experience and customer journey via building AI and ML‑enabled experiences and services. In this role you will build and optimise AI/ML solutions and infrastructure that power our customer journey related products. You'll be working with a strong AI/ML team and seasoned leaders in Engineering, Product, Design, Data Science, Marketing, and Sales. In this role, you'll work cross‑functionally to build Platforms that span the entire breadth of the unified service platform stack using machine learning and AI to personalise world‑class content for our customers and enhance customer experience. Here's what you'll do day‑to‑day: Design and develop scalable, production‑grade AI and machine learning models for solving complex business problems. Lead and mentor teams of ML engineers, fostering a culture of technical excellence and innovation. Collaborate cross‑functionally with product, engineering, and business stakeholders to identify AI opportunities and translate them into actionable solutions. Stay current with latest AI research; prototype and implement new algorithms and advancements from academia and industry. Oversee model validation, deployment, evaluation, and lifecycle management, ensuring robust monitoring, explainability, and performance. Guide technical strategy, roadmap, and architectural decisions for the ML/AI function. Communicate findings, roadmaps, and performance results clearly to executives and non‑technical partners. Here's what we're looking for: 8+ years' hands‑on experience building and deploying end‑to‑end ML/AI systems in industry or academia. Deep expertise in one or more advanced ML methods (supervised, unsupervised, reinforcement learning, deep learning, NLP, LLMs, RAG, etc.). Proven track record of delivering large, impactful ML/AI projects into production environments. Proficient in modern ML frameworks (TensorFlow, PyTorch, HuggingFace, etc.) and cloud computing platforms (AWS, GCP, or Azure). Strong programming skills in Python and familiarity with best engineering practices (CI/CD, testing, code review). Demonstrated leadership in cross‑disciplinary teams and ability to mentor scientists and engineers. Excellent communication skills and business acumen. Ph.D. or Master's degree in Computer Science, Machine Learning, Statistics, Mathematics, or a related field is a plus. Our cash compensation amount for this role is targeted at $230k-280k for San Francisco, New York, and Seattle, $205k-255k in Los Angeles, $185k-234k in Denver, and 200k-250k CAD for Toronto. Final offer amounts are determined by multiple factors including candidate experience and expertise and may vary from the amounts listed above. Gusto has physical office spaces in Denver, San Francisco, and New York City. Employees who are based in those locations will be expected to work from the office on designated days approximately 2-3 days per week (or more depending on role). The same office expectations apply to all Symmetry roles, Gusto's subsidiary, whose physical office is in Scottsdale. When approved to work from a location other than a Gusto office, a secure, reliable, and consistent internet connection is required. This includes non‑office days for hybrid employees. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger. If you share our values and our enthusiasm for small businesses, you will find a home at Gusto. Gusto is proud to be an equal opportunity employer. We do not discriminate in hiring or any employment decision based on race, color, religion, national origin, age, sex (including pregnancy, childbirth, or related medical conditions), marital status, ancestry, physical or mental disability, genetic information, veteran status, gender identity or expression, sexual orientation, or other applicable legally protected characteristic. Gusto considers qualified applicants with criminal histories, consistent with applicable federal, state and local law. Gusto is also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. We want to see our candidates perform to the best of their ability. If you require a medical or religious accommodation at any time throughout your candidate journey, please fill out this form and a member of our team will get in touch with you. #J-18808-Ljbffr

Job DescriptionBe one of the Bedo 100 Albedo is making Very Low Earth Orbit (VLEO) mainstream, building the infrastructure to usher every satellite mission set into this new orbital domain. We build buses, integrated satellites, and turnkey missions for customers to thrive in VLEO, between 200 km - 400 km, where proximity compounds performance & drag self-cleans debris. As part of the first 100 employees at Albedo, you will have a big impact on Albedo's trajectory to proliferating VLEO - whether you're advancing hardware to increase satellite longevity, scaling production for large constellations, building next-gen flight and ground software to push performance, or enabling missions that matter for national security and our day-to-day life here on earth. How We Operate: Albedo takes a first-principles approach - in space and in business. We move with speed, take calculated risks, and learn quickly. We use AI regularly to create leverage in every discipline across the company. We work in-person at our Broomfield CO HQ to maximize team & company productivity. We work hard & with urgency to compound our first-mover advantage. Who We're Looking For: Builders who want to own outcomes, not tasks. Systems thinkers who balance precision with iteration while thinking about the big picture. Individuals who are energized by creating a category rather than competing in an existing one. You'll join a team that has already proven what others said wasn't feasible and is now scaling & upgrading our VLEO buses & payloads to serve mission sets across sensing, communications, and responsive operations. If you can feel the excitement running through your veins, apply to be one of the Bedo 100.Compensation and Benefits: Employee friendly equity compensation 4% direct matching 401k Health Insurance: 100% employee coverage & 75% dependent coverage Parental leave and childcare coverage Flexible vacation and sick time from day one 12 company holidays $100 monthly wellness benefit Relocation package if not based in Denver What You'll Do: Responsible for optical modeling and sensitivity analysis Converting all low-level wavefront error (WFE) contributions of opto-mechanical design into WFE budget. Working with the opto-mech designers to map the non-perfect aspects of their designs into rms WFE space from mechanical space including thermal-structural dynamics. Identify terms we cannot quantify at various levels of assembly and determine impact/path forward to ensure design closes with integration. Responsible for set-up optical analysis results of structural-thermal-optical performance analysis (STOP) with inputs from thermal and structural engineering Responsible for interpretation and analysis of STOP results to and sensitivity analysis to determine next steps in design iteration Work with team to understand details of design causing results and iterate to optimize the design Obscuration analysis for opto-mechanical design and as-built Line of Sight sensitivity matrix analysis for opto-mechanical design and as-built Field Angle Map (distortion) analysis for opto-mechanical design and as-built Develop and perform Monte Carlo WFE prediction from current RSS WFE prediction Manage WFE budget as design progresses to re-allocate terms which can and cannot meet original allocation Responsibly recommend re-allocation of WFE margin as design matures Create optical performance merit function(s) for existing system design WFE accounting for the 1g ground test “mission" and associated uncertainty, each of the different major alignment step missions, and the post-environmental test mission, in addition to the normal 0g mission Produce overall predicted system WFE maps, and in working with alignment lead engineer, including step-by-step expectations per alignment plan - Including 1g to 0g analytical prediction Analyze AIT environmental impacts to alignment measurement error Your Ideal Skills and Experience: 5-10+ years of experience working optical system analysis and optimization Familiarity with various optical design and analysis software tools Deep understanding of optical sensitivities, aberrations and what effects them in mechanical design/implementation Experience with WFE budgets, allocation and budget management Experience with STOP modeling and the iterative, multi-disciplinary process Hands on experience optimizing optical systems to reduce aberrations and WFE Regularly uses AI tools as essential leverage to accelerate work, improve clarity, and multiply output The final compensation package is subject to change if the candidate's experience and company need drive a different job level than originally slated for the position. Albedo does not accept agency resumes. Please do not forward resumes to Albedo employees. Albedo is not responsible for any fees or overhead related to unsolicited resumes. Additional Requirements: In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All persons hired will be required to be a U.S. citizen, a lawful permanent resident of the U.S., or protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Opportunity Employer/Veterans/Disabled: Albedo is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. Know Your Rights \u007C\u007C Pay Transparency Nondiscrimination Provision Relocation: Relocation for this position is available US CITIZENSHIP IS REQUIRED #LI-Onsite We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.