Research and development technician jobs in Reno, NV - 1,908 jobs

AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our products use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists, engineers, and technicians with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D technician who specializes in precision assembly and testing. As a hands-on R&D Technician at AOSense, you will work with physicists and engineers to build and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers, as well as component technologies that we sell commercially to the R&D community. RESPONSIBILITIES: Collaborate with physicists and engineers to assemble and test complex quantum sensor and atomic clock hardware Procure and track inventories of mechanical, optical, vacuum, and electrical components Coordinate component and subsystem fabrication, assembly, and test Assemble precision mechanical systems Align lasers through optical systems Procure and maintain laboratory equipment and supplies Collaborate with engineers to define and implement test plans Bake out and leak test vacuum systems Document and report results of validation testing Requirements Demonstrated success in precision mechanical assembly of prototypes and products Enthusiasm for developing expertise in new fabrication disciplines Proven organizational skills and attention to detail Hands-on experience with test equipment Excellent troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Expertise aligning and securing micro-optical components Hands-on experience with vacuum system assembly and testing Adept in glovebox assembly work Sensitivity to cleanliness requirements of vacuum and optical assemblies Skilled in mechanical prototyping, including basic machining and finishing operations Practical experience with advanced bonding methods, including soldering, brazing, and adhesives Proficiency with SolidWorks mechanical design software Familiarity with electronics prototyping, including reading schematics, PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and analysis software such as LabVIEW, MATLAB, and Python EDUCATION AND EXPERIENCE: Associate degree in a relevant technical field or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

The Opportunity: The Palate of a Chef, the Mind of a Scientist TCHO is looking for a rare professional to serve as the tactical engine of our research and production. This individual will fill a high-impact role that bridges the gap between creative sensory exploration and technical production. This is a hands-on role at our factory, responsible for tending the entire lifecycle of our chocolate. This begins with the cacao beans being grown around the world by our farmer partners, to the final production of high-end chocolate and confections at our production facility in Berkeley. We are seeking a maker who can manage complex data and production schedules while maintaining a disciplined focus on creativity and flavor. This position is 100% onsite due to the hands-on nature of the role, including production, sensory evaluation, laboratory work, and small-batch confectionery manufacturing. 1. Sensory Mastery & Tasting Daily Analysis: Lead disciplined daily sensory panels of raw cacao liquors, experimental batches, finished chocolate, and confections to ensure every product meets TCHO standards. Raw Material Selection: Participate in the selection and sensory analysis of all raw materials, including cocoa beans, liquor, powder, butter, and inclusions such as nuts or vanilla. Final Sign-off: Provide sensory sign-off for final products coming off the line to ensure manufacturing quality and consistency. 2. The “Source” & Laboratory Management Bean Sample Management: Manage the intake of cacao samples from global partners, including roasting, winnowing, and grinding micro-batches to evaluate fermentation quality and genetic potential. Flavor Lab Oversight: Manage daily operations of the flagship TCHO Flavor Lab space (one of only 12 worldwide). Operational Upkeep: Oversee lab organization, cleaning, sample retention, and restocking of laboratory supplies and equipment. 3. Production, Formulation & Retail Confectionery Formula Creation: Develop and manage proprietary daily production formulas used by the manufacturing team. Retail Confectionery Production: Act as a Confectioner for TCHO Retail, responsible for creating small-batch and small-lot confections for retail customers, including hand-crafted and limited-run items. Efficiency & Scalability: Support factory operations by optimizing run times, flush materials, FIFO practices, and small-batch scalability. SOP Compliance: Ensure all product SOPs are followed, including requirements related to cross-contamination, Organic, Kosher, and Fair Trade certifications. 4. New Product Development (NPD) Dream-to-Reality: Translate creative product concepts into consistent, repeatable production. Prototyping: Execute hands-on prototyping and produce sales and retail samples, including chocolate formulas, plant-based ganache, enrobed items, panned goods, and other confections. Scaling: Move products from lab-scale concepts to small industrial and retail-ready production. Who You Are Palate-Driven: You possess an advanced ability to articulate flavor and a deep interest learning how the magic of chocolate comes to life. Analytical: You love a good system and can track R&D data and formulas with precision to keep projects on a professional timeline. Technically Grounded: You likely have a background in Food Science, Pastry, or Confectionery and know your way around the bakery and confectionery world. Onsite & Flexible: This is not a desk job. You are based at our Berkeley HQ and willing to work weekends to keep the lab and production cycles moving. Skills & Abilities Bachelors' degree or equivalent Minimum 3 years working in pastry, confectionary or chocolate industry, Demonstrated leadership experience of teaching and developing teams within food industry. Excellent writing, reading and communication skills Spanish fluency is a major plus. Ability to transport and move 50-pound handloads Must be able to remain in a stationary position for entire shift Must be able to work above ground levels-10 feet and in cold and warm temperature work environment Salary Range - $95,000 - $120,000

About This Role We are seeking a motivated R&D Food Technologist to join our innovative R&D team in Bell Gardens, CA. In this role, you will be responsible for developing and testing new food products, ensuring high-quality standards, and improving existing products. Responsibilities include conducting research, performing laboratory experiments related to food technology and food science, analyzing ingredients, and maintaining compliance with food safety and industry regulations. The role requires collaboration with cross-functional teams to innovate and support the company's product development goals. Key Responsibilities New product development from research and raw ingredient sourcing to lab prototype development, sampling preparation, costing, trial run, product's SOP & product's specification, develop and refine recipe formulation for mass production purposes. Evaluate current and alternative food ingredients, create product recipes, and conduct sensory evaluation of new food products to ensure to meet customer needs and requirements. Participates on cross-functional teams to ensure effective resolution of technical issues and support product innovation. Assist the QA Department in evaluating the HACCP program for new products to ensure the proper function of the Quality Assurance Department including but not limited to Quality, Regulatory, Food Safety, HACCP, SSOP, Labeling, and USDA. Assuring that operations have a consistent understanding of quality programs and actively participate in process improvement designed to achieve quality and company goals. Other duties as assigned by Management. Qualifications Master's or Bachelor's degree in Food Science/Food Technology, or related field Bilingual is preferred (in English and Chinese) Food Technology and Food Science knowledge Experience in Research and Development (R&D) Laboratory skills Knowledge of the food industry and market trends Ability to create and develop new food products Excellent problem-solving and analytical skills Good communication and teamwork skills Attention to detail and ability to follow protocols Experience with food safety and quality standards Benefits Health insurance Paid time off 401(k) retirement plan Company offers H1B sponsorship

About the Company HEYTEA is a pioneering and trend-setting new-style tea drink brand born in 2012. We are obsessed with creating inspired drinks and bakery items that surprise and delight our customers worldwide. Through continuous innovation with premium ingredients, we redefine the tea-drinking experience. Now, as we expand our footprint in the United States, we are looking for a passionate Bakery R&D Specialist to join our journey and craft the next signature bite that resonates with the American palate. About the Role As a Bakery R&D Specialist, you will be the culinary architect behind HEYTEA's bakery lineup in the U.S. market. You will bridge Eastern inspiration with Western tastes, developing innovative, high-quality baked goods that complement our iconic tea drinks. This role requires a unique blend of technical expertise, creative flair, and cross-cultural communication skills. Responsibilities Product Development & Innovation: Lead the end-to-end development of new bakery items (e.g., bread, cake, pastry) for the U.S. market, from conceptualization to launch. Adapt and reinvent HEYTEA's classic bakery items to suit local ingredient availability and consumer preferences. Conduct thorough market research and trend analysis to capture the latest food movements. Technical Execution & Quality Control: Formulate recipes, specify ingredients, establish precise SOPs, and set quality standards. Collaborate with supply chain and production teams for sourcing and pilot production. Cross-functional & Cross-cultural Collaboration: Serve as the key liaison between the U.S. team and HEYTEA's Global R&D Center in Shenzhen. Communicate project progress, challenges, and insights effectively in both Chinese and English. Work closely with marketing, operations, and training teams to ensure successful product launches. Qualifications Bachelor's degree or higher in Food Science, Culinary Arts, Bakery Science, or a related field. 3+ years of hands-on experience in bakery R&D, preferably within the premium café, chain restaurant, or retail food industry. Proficiency in both written and spoken Chinese (Mandarin) and English is essential for daily business communication. Deep understanding of American consumer tastes and the local bakery ingredient landscape. Strong creative and problem-solving skills, with a passion for innovation. Ability to thrive in a fast-paced, dynamic, and cross-cultural team environment. Required Skills Technical expertise in bakery product development. Creative flair for innovative baking. Cross-cultural communication skills. Preferred Skills Experience in premium café or retail food industry. Knowledge of local ingredient sourcing. Pay range and compensation package Competitive compensation and benefits package. Equal Opportunity Statement HEYTEA is committed to diversity and inclusivity in the workplace. We encourage applications from individuals of all backgrounds and experiences. 关于公司 HEYTEA是一个开创性和引领潮流的新式茶饮品牌,成立于2012年。我们专注于创造灵感饮品和烘焙产品,给全球客户带来惊喜和愉悦。通过持续创新和优质原料,我们重新定义了饮茶体验。现在,随着我们在美国市场的扩展,我们正在寻找一位充满热情的烘焙研发专员加入我们的旅程,打造能触动美国味蕾的下一款经典产品。 关于职位 作为烘焙研发专员,您将成为喜茶美国市场烘焙产品线的“美食建筑师”。您将连接东方灵感与西方口味,研发创新,高品质的烘焙产品,以搭配我们标志性的茶饮。此职位需要卓越的技术专长,创造力和跨文化沟通能力。 职责 产品研发与创新：主导针对美国市场的新烘焙产品（如面包,蛋糕,点心）从概念到上市的全流程研发。 调整并重塑喜茶经典烘焙产品,以适应本地原料供应和消费者偏好。 进行深入的市场调研和趋势分析,捕捉最新饮食潮流。 技术执行与质量控制：设计配方,指定原料,建立精准标准作业程序,设定质量标准。 与供应链及生产团队协作,完成原料寻源和试生产。 跨职能与跨文化协作：作为美国团队与喜茶全球研发中心（深圳）的关键联络人。 熟练运用中英文双语,有效沟通项目进展,挑战与洞察。 与市场,运营及培训团队紧密合作,确保产品成功上市。 任职要求 食品科学,烹饪艺术,烘焙科学或相关专业本科及以上学历。 3年以上烘焙研发实践经验,优先考虑具有高端咖啡厅,连锁餐饮或零售食品行业背景者。 必须具备流利的商务中文（普通话）和英文书面及口语沟通能力。 深刻理解美国消费者口味及本地烘焙原料市场。 出色的创造力和解决问题能力,对创新充满热情。 能够适应快节奏,动态变化的跨文化团队环境。 我们提供 参与构建喜茶美国烘焙产品线,发挥关键影响力的机会。 在全球创新品牌中工作,与行业顶尖人才协作。 具有竞争力的薪酬福利体系。 通过深入全球研发体系,获得独特的个人与职业成长机遇。

A global leader in biotechnology is seeking an experienced R&D leader in Carlsbad, CA. You will guide the strategic direction of the R&D team, focusing on the development and launch of molecular diagnostic assays. Candidates must have a M.S. or PhD, and over 10 years in IVD or clinical diagnostics. The role demands strong leadership skills and a proven track record in innovation. This position offers a salary range of $268,800 - $353,430, along with performance bonuses. #J-18808-Ljbffr

Join Camb.ai's Speech R&D team to lead innovative speech tech research, integrate findings, and set benchmarks in AI-driven dubbing and Join Camb.ai's pioneering AI team. Lead Speech R&D, integrate tech into products, publish research, and innovate in speech recognition and synthesis. About The Internet was made for English speakers. We are redesigning it for the world. At Camb.ai, we're pioneering the future of AI-driven dubbing, localization, speech synthesis and NMT. Powered by our state-of-the-art models in zero-shot performance transfer and colloquial translation, we're not just innovating; we're setting SOTA benchmarks. Backed by elite global VCs, partnering with enterprise giants and top influencers, guided by an AI leadership with five $100Mn ARR successes, we're seeking top‑tier talent to expand our AI research team comprising of individuals from Carnegie Mellon, Apple and more. Responsibilities Lead and drive innovative research in the field of speech recognition, synthesis, and related technologies. Collaborate closely with the R&D team to integrate research findings into Camb.ai's products. Keep abreast of latest advancements in speech technology and continuously push for innovations in the field. Publish research findings in leading conferences, journals, and workshops. Qualifications PhD or equivalent experience in speech technology, machine learning, or a related field. Proven track record of publishing in leading speech conferences such as Interspeech, ICASSP, etc. Hands‑on experience with popular speech toolkits and frameworks. Strong programming and algorithmic skills. To Apply Please send your resume to *************** with the subject line "Speech R&D Researcher - [Your Name]" in the subject line. Featured Thinking from CAMB.AI Handpicked stories on AI, localization, and reaching audiences worldwide. #J-18808-Ljbffr

Scale AI is seeking a highly technical and strategic Staff / Senior Staff Machine Learning Engineer to act as the Tech Lead (TL) for our next generation of deep research agents for the Enterprise. This high-impact role will drive the technical direction and oversight for Deep Research Agent Development, translating cutting-edge research in Generative AI, Large Language Models (LLMs), and Agentic Frameworks into robust, scalable, and high-impact production systems that enhance enterprise operations, analytics, and core efficiency. The ideal candidate thrives in a fast-paced environment, has a passion for both deep technical work and mentoring, and is capable of setting a long-term technical strategy for a critical domain while maintaining a strong, hands-on delivery focus. ResponsibilitiesTechnical Leadership & Vision Set the Technical Roadmap: Define and own the technical strategy, architecture, and roadmap for Deep Research Agents for the Enterprise, ensuring alignment with Scale AI's overall AI strategy and business goals. Drive Breakthrough Research to Production: Lead the end-to-end development, from initial research to production deployment, to landing on customer impact, with a focus on integrating diverse data modalities. Advanced Knowledge Retrieval: Architect and implement state-of-the-art retrieval systems to ensure the agents provide accurate and comprehensive answers from public and proprietary data sources from enterprises. Data analysis: Design and champion the development of data analysis agents that accurately translate complex natural language queries into executable SQL/code against diverse enterprise data schemas. Multimodal Intelligence: Lead the integration of Multimodal AI capabilities to process and extract structured information from visual documents, tables, and forms, enriching the agent's knowledge base. Architecture & Design: Design and champion highly scalable, reliable, and low-latency infrastructure and frameworks for building, orchestrating, and evaluating multi-agent systems at enterprise scale. Technical Excellence: Serve as the technical authority for the team, leading design reviews, defining ML engineering best practices, and ensuring code quality, security, and operational excellence for all agent systems. Lead and Mentor: Technically lead and mentor a team of Machine Learning Engineers and Research Scientists, fostering a culture of innovation, rigorous engineering, rapid iteration, and technical depth. Recruiting & Growth: Partner with management to hire, onboard, and grow top-tier talent, helping to shape the long-term structure and capabilities of the team. Cross-Functional Influence: Collaborate effectively with Product Managers, Data Scientists, and other engineering/science teams to translate ambiguous, high-level business problems into concrete, executable technical specifications and impactful agent solutions. Basic Qualifications Bachelor's degree in Computer Science, Electrical Engineering, a related field, or equivalent practical experience. 8+ years of experience in software development, with at least 6 years focused on Machine Learning, Deep Learning, or Applied Research in a production environment. 2+ years of experience in a formal or informal Technical Leadership role (Team Lead, Tech Lead) with a focus on setting technical direction for a domain. Deep expertise in Generative AI and Large Language Models (LLMs). Demonstrated experience designing, building, and deploying AI Agents or complex Agentic systems in production at scale. Experience with large-scale distributed systems and real-time data processing. Preferred Qualifications Advanced degree (Master's or Ph.D.) in Computer Science, Machine Learning, or a related quantitative field. Demonstrated experience designing and deploying production-grade Text-to-SQL systems, including handling complex schema linking and query optimization. Practical experience with Multimodal AI, specifically integrating OCR and vision-language models for document intelligence and structured data extraction from images/forms. Proven experience in one or more relevant deep research areas: Reinforcement Learning (RL), Reasoning and Planning, Agentic Systems. Experience with vector databases and advanced retrieval techniques. A track record of publishing research papers in top-tier ML/AI conferences (e.g., NeurIPS, ICML, ICLR, KDD). Excellent written and verbal communication skills, with the ability to articulate complex technical vision to executive stakeholders and technical peers. Experience driving cross-team technical initiatives that have delivered significant business impact. Please reference the job posting's subtitle for where this position will be located. For pay transparency purposes, the base salary range for this full-time position in the locations of San Francisco, New York, Seattle is: $252,000 - $315,000 USD PLEASE NOTE: Our policy requires a 90-day waiting period before reconsidering candidates for the same role. This allows us to ensure a fair and thorough evaluation of all applicants. About Us: At Scale, our mission is to develop reliable AI systems for the world's most important decisions. Our products provide the high-quality data and full-stack technologies that power the world's leading models, and help enterprises and governments build, deploy, and oversee AI applications that deliver real impact. We work closely with industry leaders like Meta, Cisco, DLA Piper, Mayo Clinic, Time Inc., the Government of Qatar, and U.S. government agencies including the Army and Air Force. We are expanding our team to accelerate the development of AI applications. We believe that everyone should be able to bring their whole selves to work, which is why we are proud to be an inclusive and equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability status, gender identity or Veteran status. We are committed to working with and providing reasonable accommodations to applicants with physical and mental disabilities. If you need assistance and/or a reasonable accommodation in the application or recruiting process due to a disability, please contact us at accommodations@scale.com. Please see the United States Department of Labor's Know Your Rights poster for additional information. PLEASE NOTE: We collect, retain and use personal data for our professional business purposes, including notifying you of job opportunities that may be of interest and sharing with our affiliates. We limit the personal data we collect to that which we believe is appropriate and necessary to manage applicants' needs, provide our services, and comply with applicable laws. Any information we collect in connection with your application will be treated in accordance with our internal policies and programs designed to protect personal data. Please see our privacy policy for additional information. #J-18808-Ljbffr

Join a trailblazing startup founded by a renowned Professor in transforming the future of water and air. As a Senior R&D Scientist, you'll be at the heart of pioneering technologies for atmospheric water harvesting and CO2 capture, driving innovations that make a global impact. Why You Should Apply Lead cutting-edge research in atmospheric water harvesting. Competitive salary and benefits package. Collaborate with top-tier scientists and engineers. Play a crucial role in the commercialization of breakthrough technologies. Contribute to sustainability and environmental solutions. What You'll Be Doing: Work with the head of Product Engineering to scale up MOF/COF-based technologies. Collaborate with R&D scientists on technical and functional specifications. Design and develop heat management systems, optimizing components like heat exchangers and thermal storage. Scale technologies from prototype to commercial stage. Optimize system parameters to enhance performance, efficiency, and safety. Evaluate and manage sourcing of materials and components. Set up QC/QA processes and procedures for production. Maintain detailed electronic notebooks and contribute to intellectual property. Report periodically to management and participate in technical meetings. About You: PhD in mechanical engineering or a similar field with a strong research background. Proficient in thermodynamics, fluid mechanics, and heat transfer. Over 5 years of industrial R&D experience. Skilled in designing system-level prototypes and using simulation tools. Familiar with health and safety procedures in production. Excellent teamwork, problem-solving, and communication skills. How To Apply We'd love to see your resume, but we don't need it to have a conversation. Send us an email to *********************** and tell us why you're interested. Or, feel free to email your resume. Please include Job#19433.

Fund & Co-Investment Research Associate About Allocate Allocate is transforming private market investing by enabling wealth advisory firms to seamlessly build and manage high-quality private market programs. About the Role We're seeking a Fund & Co-Investment Research Associate to join our Private Investments team. This isn't a traditional allocator role, as you'll be a critical connector between world-class fund managers, wealth advisory CIOs, and help build and manage our technology platform. You'll evaluate venture capital and private equity opportunities, conduct manager diligence, and spend significant time with wealth advisor investment teams discussing curated deals. You need to deeply understand opportunities, answer sophisticated questions, and provide clear, accurate analysis that helps clients make confident investment decisions. Equally important, you'll own the completeness and accuracy of our platform content, ensuring all investment materials, copy, and compliance documentation stay current. Key Responsibilities Investment Research & Diligence: Conduct quantitative and qualitative research on private market managers and co-investment opportunities across venture capital, private equity, and adjacent asset classes. Prepare balanced investment analysis and recommendations. Client Engagement: Spend substantial time with wealth advisor CIOs and their investment teams discussing curated opportunities. Field detailed questions, articulate investment theses, and provide real-time analysis that demonstrates deep command of each deal. GP Relationship Development: Build and maintain relationships with fund managers, including structuring conversations, access discussions, and ongoing partnership development. Platform Completeness: Own platform content integrity-ensure investment materials are updated, copy is accurate and compliant, and all client-facing documentation metour quality standards. Sourcing & Pipeline Development: Proactively source differentiated fund and co-investment opportunities through targeted outreach, industry relationships, and market intelligence. Cross-Functional Collaboration: Partner with product, technology, and operations teams to refine platform capabilities and enhance the client investment experience. Portfolio Monitoring: Support post-investment updates, quarterly reporting, and ongoing portfolio analytics for client transparency. Market Intelligence: Develop insights and content that position Allocate as a leading voice in private markets. Qualifications Experience & Knowledge: 3+ years of experience in venture capital, private equity, wealth management, investment banking, or related fields. Deep industry knowledge of the VC/PE ecosystem, fund structures, and how institutional platforms operate. Strong understanding of private markets and alternative investments. Skills & Attributes: Hustler mentality: Proactive, resourceful, and self-directed-you don't wait to be told what to do. Exceptional communication: You can explain complex investment concepts clearly and handle sophisticated Q&A with institutional allocators. Highly personable: You build authentic relationships with both GPs and wealth advisory teams. Commercial mindset: You think about client needs, platform scalability, and growth. Startup DNA: You thrive in fast-paced environments, embrace ambiguity, and move quickly. Meticulous attention to detail: You ensure accuracy and compliance across all materials. Analytical excellence: You combine quantitative rigor with qualitative judgment. Not a Fit If You're: A pure allocator looking for a traditional fund-of-funds seat. More comfortable with analysis only role than relationship-building and client engagement. Seeking a slow-paced, process-heavy environment. Unfamiliar with how technology platforms operate. Why Allocate? Shape the infrastructure layer for an entire industry. Ability to immediately work with top VCs and PE firms, along with CIOs in the wealth advisory world. Allocate is one of the fastest-growing platforms in private markets. Palo Alto office in the heart of the venture ecosystem. High impact, high visibility work with real ownership and autonomy. Additional Information Location: Palo Alto, CA. Must be able to work in-office 4 days a week. Compensation: $160K-$200K base + bonus + stock equity. Benefits: Medical, dental, vision, 401(k), responsible time off. Employment: Full-time. Compliance: This role is subject to Allocate's Code of Ethics and all related compliance obligations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Must have legal authorization to work in the U.S. now and in the future without visa sponsorship. #J-18808-Ljbffr

We are a group of people united by a strong purpose. We want you to get to know us, and Giuseppe, our very own artificial intelligence. We love good food, but above all, we love the planet, and that's why, to protect it, we reinvent the food industry, one delicious bite at a time, elevating what we eat, through our technology and based on plants. Our recipe has three mega-important components: science, technology, and of course, disruptive talents who work daily to create a better future. At NotCo we are not and do not seek to be the perfect company, but rather the right one. We are here to produce changes, and that is why we dare, fail, and sometimes achieve incredible successes. We are currently looking for a Product Development Scientist for our NotCo B2B Research & Development located in San Francisco, California, requiring an active on-site presence. This position will report to our R&D Sr. Team Lead and the incumbent will work cross-functionally to ensure R&D activities are successfully deployed locally. Responsible for the: Independently conducts day-to-day product development activities as directed by the manager across multiple projects. This includes supporting activities related to the full product lifecycle process (from product concept to successful commercial launch as needed)and supporting process development, scale-up and technology transfer Supports the design and execution of bench-top tests, pilot-plant trials and full-scale formulations to deliver high-quality food products that meet and exceed the sensory, cost, and other performance targets Proactively proposes and uses sensory and analytical analysis to guide and validate the development process Maintains detailed documentation, experiment tracking and outcomes, and documents finished goods and ingredient specifications Provides feedback to project lead regarding relevant technical and process information Communicates proactively and effectively with cross-functional teams, clearly articulating perspectives and trade-offs related to new product development goals Utilizes NotCo's proprietary AI technology to develop and improve food products Supports formula validation activities as well as process development, scale-up and technology transfer Engages in client communications and workshops, bringing technical Maintains detailed documentation across all R&D activities in a timely manner Qualifications / Requirements: Bachelor's degree in Food Engineering, Food Science, Engineering in Biotechnology or a similar discipline. 2 + years of Food R&D experience is desired, preferably across both food and beverage categories. Be agile, adaptable, and thrive in a dynamic and changing culture; works relentlessly to overachieve, anticipate obstacles, and create plans to overcome them. Adapts easily to changing priorities and direction based on new project learnings and team priorities. Demonstrated competency to effectively communicate (oral & written) cross-functionally with solid collaboration skills. Comfortable in client-facing situations and able to communicate complex topics clearly and simply. Excel in a startup environment, is excited to create new procedures and processes from scratch and has a strong entrepreneurial mindset. Be a problem solver, have a general manager mindset, and take the initiative to get the job done Possess strong planning, project management, and execution skills, and the ability to articulate where and how you have used them. Rigorous data-driven/analytical capability and ability and presence to present data effectively to a leadership team Work well in teams and cross-functional groups in a matrixed environment, both regionally and globally Possesses strong computer skills, including a high level of proficiency in MS Office, specifically Excel Authorization to work in the U.S. is required Ability to travel up to 50% of the time, including international travel and extended trips. NotCo is committed to fair and equitable compensation practices. The pay range for this role is $65,000 - $75,000. Actual compensation packages are based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. This may be different in other locations due to differences in the cost of labor. We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

About the Team The Scaling team is responsible for the architectural and engineering backbone of OpenAI's infrastructure. We design and deliver advanced systems that support the deployment and operation of cutting‑edge AI models. Our work spans system software, networking, platform architecture, fleet‑level monitoring, and performance optimization. As part of the Stargate initiative, the Industrial Compute team's mission is to build and operate the foundation that powers our research and products. To deliver on this mission, there is a critical need for advanced lab infrastructure and capabilities to perform rapid prototyping, targeted and end‑to‑end testing, and system qualification across the full software and hardware stack to ensure readiness and stability for fast and smooth deployment of our large‑scale clusters. About the Role We are seeking an experienced engineer to lead advanced R&D, rapid prototyping, and build‑out of in‑house lab infrastructure to support system bring‑up, testing, and qualification for next‑generation systems. In this role, you will: You will work closely with the research, fleet, silicon, hardware health, and external vendors and partners to accelerate system qualification, increase deployment velocity, and improve platform and fleet robustness at scale. You will focus on detailed evaluation and systematic testing of early hardware, including servers, racks, NICs, switches, chips, optics, transceivers, and other lab prototype equipment. Your engineering work will span a broad range of software (systems, firmware, RDMA, collectives, cluster provisioning, orchestration, etc.) and/or hardware solutions (e.g., FPGA development) to manage lab infrastructure, support bring‑up activities and perform extensive characterizations of new hardware through microbenchmarking, fault injection, impairment modelling, localized stress testing, and end‑to‑end evaluations. This role is based in San Francisco, CA or Seattle, WA. We use a hybrid work model of 3 days in the office per week and offer relocation assistance to new employees. You might thrive in this role if you: Bachelor's Degree in Computer Science or a related field Strong background in system architecture, large‑scale distributed systems and AI/HPC networking expertise (high performance multipath transport protocols, RDMA, RoCE, Infiniband) 5+ years of software development experience in C/C++ and Python Experience developing and running large‑scale distributed AI workloads Hands‑on lab experience with datacenter hardware (racks, servers, switches, NICs, accelerators, etc.) Experience with low‑level software and/or FPGA hardware development (e.g., firmware or RTL) About OpenAI OpenAI is an AI research and deployment company dedicated to ensuring that general‑purpose artificial intelligence benefits all of humanity. We push the boundaries of the capabilities of AI systems and seek to safely deploy them to the world through our products. AI is an extremely powerful tool that must be created with safety and human needs at its core, and to achieve our mission, we must encompass and value the many different perspectives, voices, and experiences that form the full spectrum of humanity. We are an equal opportunity employer, and we do not discriminate on the basis of race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability, genetic information, or other applicable legally protected characteristic. For additional information, please see OpenAI's affirmative action and equal employment opportunity policy statement. Background checks for applicants will be administered in accordance with applicable law, and qualified applicants with arrest or conviction records will be considered for employment consistent with those laws, including the San Francisco Fair Chance Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, and the California Fair Chance Act, for US‑based candidates. For unincorporated Los Angeles County workers: we reasonably believe that criminal history may have a direct, adverse and negative relationship with the following job duties, potentially resulting in the withdrawal of a conditional offer of employment: protect computer hardware entrusted to you from theft, loss or damage; return all computer hardware in your possession (including the data contained therein) upon termination of employment or end of assignment; and maintain the confidentiality of proprietary, confidential, and non‑public information. In addition, job duties require access to secure and protected information technology systems and related data security obligations. To notify OpenAI that you believe this job posting is non‑compliant, please submit a report through this form. No response will be provided to inquiries unrelated to job posting compliance. We are committed to providing reasonable accommodations to applicants with disabilities, and requests can be made via this link. OpenAI Global Applicant Privacy Policy At OpenAI, we believe artificial intelligence has the potential to help people solve immense global challenges, and we want the upside of AI to be widely shared. Join us in shaping the future of technology. #J-18808-Ljbffr

Job Title: Product Development Technician The Product Development Technician supports engineering and product development activities by executing routine technical tasks, laboratory testing, and data documentation. This role works closely with engineers, project leads, and lab teams to support prototype development, testing, and equipment qualification in a regulated environment. Key Responsibilities Collect, format, analyze, and maintain technical and laboratory data Prepare technical documentation, reports, summaries, and engineering drawings Support engineers with testing, prototype development, and equipment qualification Execute test protocols, conduct testing, and document results accurately Assist with lab operations, including equipment calibration, maintenance, and safety procedures Handle test samples and chemicals used in conditioning and testing Communicate testing results and project risks to managers or team leads Train and support lower-level technicians as needed Minimum Qualifications High school diploma or equivalent 4-6 years of laboratory or technician experience in a regulated environment Experience following written procedures and working in team-based settings Preferred Qualifications Bachelor of Science in a technical field 1-2 years of experience in a laboratory or R&D environment Proficiency with computers and technical documentation tools Strong communication skills and ability to work cross-functionally

Reports to: Managing Principle Mechanical Engineer, R&D Workplace Type: Hybrid, on-site in Santa Cruz an average of 4-days per week Capstan Medical:Creating a new standard for minimally invasive structural heart treatment Who we are: At Capstan Medical, we're driven by an unwavering commitment to transforming the treatment of heart valve disease. By merging surgical robotics with catheter-based technology and next generation implants, we've pioneered a patient-optimized approach to repair and replace heart valves. Our innovative technology offers a significantly less invasive alternative to traditional open-heart surgery while ensuring precise and reliable placement of the heart valve implant. With these advancements, we may be able to provide patients with a solution to their heart valve disease while significantly reducing recovery time and minimizing the risk of complications. With a dedicated team of heart valve device experts and robotics engineers, we are fully committed to developing a comprehensive and transformative solution that will positively impact the lives of individuals affected by this condition. Capstan Medical is uniquely positioned in Santa Cruz. This gives us access to the amazing technical talent of the Bay Area, but in an environment that we feel is conducive to doing our best creative work. Our office is adjacent to large tracts of open space with bicycle trails straight from the office doors offering access to the hills and beaches of Wilder Ranch State Park for road/mountain bicycle riding, hiking, and surfing. Come join us and become part of a team revolutionizing heart valve treatment! The Opportunity: We are building a novel medical robotic application, bringing together an exciting set of hardware and software into an elegant product. We are looking for someone who can take a mechanical system of the robot design from initial concept all the way to product. What You'll Do: Collaborate with Manufacturing and Clinical teams on designs, incorporating this input into quick and effective design iterations. Lead and set direction for system and subsystem architectures and mechanical design efforts while owning cross-functional mechanical deliverables and technical strategy Participate in building and bringing up prototype robotic systems and support all things mechanical in their pre-clinical lab use. Lead alignment of complex technical topics and hardware architecture across the Mechanical Engineering team and broadly across the R&D organization and Capstan. Document and communicate learnings on design manufacturability and reliability to the broader hardware team, mentoring others in best practices and scalable design approaches Document and communicate your work through design reviews and as appropriate released documents as part of the product development process Identify gaps and pitch in as needed to ensure that the team meets their goals and objectives, driving alignment across teams when priorities conflict Strengthen the team by providing leadership and mentorship on best practices and design strategies as they grow in their abilities to develop performant, scalable, and elegant designs. Be a valuable partner with feedback and collaboration in brainstorming and design reviews. What You'll Need: BS in Mechanical Engineering or related engineering discipline, or equivalent work experience Expecting 12+ years of relevant experience (medical device experience preferred) Comfort working with high levels of ambiguity and an ability to convert that into tangible outcomes Experience with designing, manufacturing transfer, and shipping of medical device capital equipment or equivalent complexity systems Deep expertise in areas particular to robotic system design: kinematics, mechanisms, bearings, gears, sensors, actuators. Experience with medical device (or equivalent) development process, design control, design verification, and regulatory processes Ability to work in a hybrid work environment, working onsite in Santa Cruz on average 4 days a week Ways To Stand Out: Experience with the full commercial lifecycle from concept through reacting to and addressing field issues with your designs. Skills with Python or Matlab for data analysis, simulation, and interacting with robotic equipment. Excessive nerdiness about manufacturing, mechanisms, robots, or any other adjacencies. Leadership experience. While this role is as an individual contributor, it is a position of significant technical and thought leadership within the company. Why Join Us: We offer a fun, fast-paced, collaborative environment where you will be working on transformational technologies in the cardiac healthcare space. We offer outstanding benefits with medical, dental, and vision covered at 100% for you and your family, as well as flex time off. We thrive in our work-hard, play-hard environment. Bring your bike or running shoes if you'd like or just be ready to enjoy a fun office outing. We enjoy time inside the office and out! We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, veteran status, and disability, or other legally protected status. #J-18808-Ljbffr

A leading semiconductor firm in San Diego is seeking a Senior R&D Engineer responsible for developing and improving products and technologies. The ideal candidate will have a Master's degree in engineering, extensive experience in product development, and expertise in C/C++, Python, and machine learning frameworks. This role involves collaboration across teams, mentoring junior engineers, and contributing to hardware acceleration projects. Competitive salary and full-time hours offered. #J-18808-Ljbffr

Food Technologist / Regulatory Specialist Duties and Responsibilities: Submit labels to the USDA and keep USDA approvals on file. Review and revise product labels to comply with USDA/FDA regulations. Create and update in-house Product Specification Sheets as well as Product Specification sheets for customers. Manage files of Suppliers Product Specification Sheets, Letter of Guarantees, and COAs, claim substantiation documents and records. Create nutritional facts panels using USDA nutrient database and/or Genesis software. Keep records of product, component, and ingredient assembly information. Create formulation sheets for production. Work cross functionally with operations, QA, production, marketing, and sales to ensure compliance on label and packaging and facilitate new product launches. Work with chefs, culinary consultants, and agencies in taking recipes from concept to production. Maintain working knowledge of and follow industry regulations and customer requirements in development and commercialization of products. Develop specifications for all raw materials, process controls, and finished goods. Independently review changes in products, product specifications, and manufacturing processes to evaluate regulatory implications of the change. Advise team and implement changes accordingly. Represent Regulatory Affairs in project team meetings to guide regulatory compliance during product development and launch. Analyze changing regulatory requirements and their impact on the organization. Coordinate, review, and manage regulatory documents to ensure compliance with local, state, and federal regulatory requirements. Ensuring that the internal regulatory department database for new products is kept updated with back up information for all formulations to ensure that all necessary paper work is available for labeling, and registration. Successfully assist the company during several annual external regulatory examination and audits covering compliances of BRC, FSIS, USDA, Organic and FDA standards Develop, implement, and manage risk assessments for suppliers, raw materials, ingredients and packaging, and assist in periodically evaluating and updating the organization action plan to address risks. Manage regulatory approval process for marketing/advertising material and packaging to ensure accuracy of claims/labeling and compliance with regulations related to food, food safety, specifications, product usage, nutrition, and health claims in the USA. Other duties as assigned. Qualifications and Experience:BA/BS in Food Science, Applied Science, Nutrition, or Business Minimum of 3 years of experience in food labeling and regulations (both USDA and FDA as well as NIST, CBP, FTC) Minimum of 3 years of experience in the food and beverage industry Strong organizational, analytical, critical thinking, communication, are required. Strong working knowledge of food Federal, State and Local regulations with specific emphasis on nutritional labeling food ingredients under both USDA and FDA.Must be proficient in knowledge of food processing, preparation, quality assurance and quality control with extensive and proven record in maintaining the highest standards of documentation, applications of regulatory requirements and policies in the USA. Knowledge of physical properties and chemical composition of food and ingredients. Project management experience in a team setting to work effectively in accomplishing company and department objectives under tight deadlines. Benefits Overview:Holiday Pay Paid Time Off Health Insurance Vision Insurance Dental Insurance Accident Insurance Life Insurance Flexible Spending Account (FSA) 401k

A leading technology firm in San Francisco seeks an R&D Lasers and Optics Engineer to join a team supporting advancements in quantum computing technologies. Responsibilities include maintenance and development of optical systems. The ideal candidate should have a minimum of a bachelor's degree, hands-on optics experience, and the ability to work collaboratively in a high-technical environment. The role offers compensation ranging from $81,000 to $101,000 annually, with various benefits like flexible schedules and health insurance. #J-18808-Ljbffr

Job Description American Battery Technology Company (ABTC) provides technical development and commercialization of domestic, sustainable sourcing of critical battery materials through lithium-ion battery recycling and battery metal extraction technologies for use in batteries that power electric cars, grid storage applications, and consumer electronics and tools. Our first of kind systems produce commercial-scale battery materials that are sold into the battery manufacturing supply chain. As an R&D Lab Technician, you will work with the Research and Development team on all facets of laboratory operations to support the design and implementation of our proprietary lithium-ion battery recycling processes and primary resource extraction technologies. The ideal candidate will be familiar with good laboratory practice and have experience with reagent preparation, hydrometallurgical processing, writing standard operating procedures (SOPs), and conducting lab-scale experiments. The candidate must be able to conduct experiments while following standard operating procedures in a safe and responsible manner. This position will report to the R&D staff. Requirements Perform tasks needed to maintain good laboratory hygiene, including cleaning of labware, instrumentation, and workspaces. Perform routine laboratory tasks associated with reagent preparation, waste handling, and data management. Writing of Standard Operating Procedures (SOPs) Set up and execute experiments in cooperation with R&D staff. Record, analyze, interpret, and report results clearly and concisely. Work with the R&D team to comply with environmental health/safety and all associated regulatory requirements. Qualifications Bachelor's degree in chemistry, chemical engineering, metallurgical engineering, or a related field Knowledge of both organic and inorganic chemistry principles +1 years of experience in an R&D laboratory setting. Experience in typical laboratory practices including waste handling, safe chemical hygiene practices, reagent preparation, data management, and experimental setup/execution Experience with the calibration of various instruments such as pH /conductivity probes and analytical balances Proficient in performing basic chemical and material balance calculations Excellent written and verbal communication skills. Ability to work as a team player in a challenging and fast-paced environment. Experience computer skills, proficient in with Microsoft Word, Excel, and PowerPoint Excellent record keeping, data collection, and sample tracking The ability to work independently Physical Demands Ability to stand or sit for prolonged periods of time, up to 6 hours/day or more. Ability to move samples and materials (no more than 50 lbs in weight) from lab to lab The ability to wear PPE which includes but not limited to long pants and closed toed shoes, lab coat, eye protection, hand and face protection, respirators. Ability to work in an environment that may include exposure to dust, noise, and chemicals for an extended period. Good manual dexterity for the use of common office and laboratory equipment Must have good vision, 20/20 or corrected vision. Benefits Competitive Pay Company-sponsored health, dental, vision, and life insurance Parental Leave Company-sponsored Employee Assistance Program Stock options 401(K) Flexible paid time off Equal Opportunity Employer American Battery Technology Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Americans With Disabilities Act American Battery Technology Company does not discriminate based upon disability in its hiring or employment practices and complies with the ADA title I employment regulations. If you need assistance or an accommodation due to a disability or a special need, please contact Human Resources.

The Great Basin Institute, in cooperation with the Summit Lake Paiute Tribe (SLPT), is recruiting two (2) Fisheries Research Associates to assist the SLPT Natural Resources Department staff to perform tasks associated with surveying, counting, capturing, and tagging Lahontan cutthroat trout (LCT). Summit Lake holds one of the two remaining self-sustaining lake populations of LCT, a federally threatened species. Monitoring this population has been a 60+ year project for the SLPT and ensuring its preservation is vital for the recovery of this species as a whole and retaining the cultural significance of these fish to the Tribe. This is a 28-week field-based position in a remote location on the Summit Lake Reservation in Humboldt County, Nevada. Primary Responsibilities: Assist with monitoring the LCT spawn run in the Mahogany Creek Fish Trap (25%); Assist with electrofishing (preparation/surveying) throughout the watershed (20%); Assist with monitoring the lake population through lake sampling (15%); Assist with juvenile/fry trap monitoring (15%); Conduct redd surveys throughout the watershed (15%); Assist with fisheries restoration projects (5%); and Occasionally assist with other natural resource projects as needed, such as water quality monitoring, Tribal outreach, Sage Grouse population monitoring, and fence/station/vehicle maintenance (5%). Timeline: Starting on March 18, 2026, and ending on October 1, 2026; 28 weeks; Full-time (40 hours/week) with a combination of a 4/10 schedule (four ten-hour days each week), and 5/8 schedule (five eight-hour days each week); Weekend and holiday work may be required; and A willingness and ability to remain flexible with work schedules is necessary given the needs of the fish trap. Depending on weather, the start date for this position may need to be delayed (alternate start date: March 25, 2026); and Start date will be no later than March 25, 2026. Location: Work will take place in the field station on the Summit Lake Reservation, the most remote Indian reservation in Nevada. Located in NW Nevada, the Reservation is 50 miles south of the Oregon border and 70 miles east of the California border, and about 4 hours north of Reno, Nevada. Compensation and Benefits: Compensation: $23.00 hourly; Benefits: Company-paid comprehensive medical, dental (with option to upgrade in coverage), and vision insurance premiums; $25,000 Basic Life & AD&D insurance at no cost; Access to Pro Deals; Paid leave and holidays based on the holiday schedule for Summit Lake Paiute Tribe, pending approval of GBI supervisor and on-site supervisor; and Mental health support resources are employer provided through an Employee Assistance Program (EAP). Housing: Shared housing with basic amenities (electric, water, heat/AC, wifi etc.) is provided on the Reservation during scheduled field work; Note: Employees are expected to adhere to all Summit Lake Paiute Tribe Policies when on Tribal property including during non-working hours. Qualifications Required: Successful completion of at least 2 years of college-level coursework in natural resources, biology, or related field; At least six months experience in natural resource projects such as wildlife research and monitoring; Able to maintain a flexible work schedule - i.e. working up to a week at a time, working on weekends, and the possibility of schedule changes a week or two out; Ability to navigate in remote areas (no cell service) using compass, GPS, natural features, and maps; Ability to live and work as a team member in an extremely remote area of Northern Nevada for extended periods of time; Possession of a clean and valid driving license (a driving record will be requested during the onboarding process); Ability to lift up to 50lbs and hike for extended periods of time over uneven terrain in inclement weather; Adhere to daily/weekly work schedules that are subject to change in response to project needs; Comfortable working in both extremely cold and extremely hot temperatures; Comfortable with primitive living conditions for extended periods of time; Self-motivated with a positive attitude; Able to demonstrate good written and verbal communication skills; effectively interact with Tribal members, staff and agency personnel; work independently, collaboratively, and effectively in a cross-cultural environment with people of various skills; Working knowledge of proper wildlife and fish handling, tagging, and tracking techniques, proper data collection and record keeping; Safe driving techniques on unmaintained dirt/gravel roads using 4x4 trucks, UTVs and ATVs; Comfortable working on a small boat for long hours; Passion for the outdoors and natural resource conservation and management. How to Apply: Please apply online through this application link by submitting an up-to-date resume, one-page cover letter that details your interest in the position, and any qualifications not fully described in your resume, contact information for three professional and/or academic references. Be sure to complete any preliminary questions prompted in the application and sign your application. Notes: This job description is not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the organization's ongoing needs. All offers of employment are contingent upon the successful completion of a pre-employment background check. Disclaimer: Although the organization has attempted to accurately and thoroughly describe this position, GBI reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the organization, at any time, with or without advance notice.

Applies research theories, principles, statistics, and models when conducting experiments and research activities. Summarizes research results and communicates findings to internal and external bodies. Assesses the scope of research projects and ensures projects are on time and within budget. Develops technical documentation for all projects and institutional knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Researches and analyzes data such as specifications, and industry standards to determine feasibility of application Develops and carries out test plans, supervises process trials internally or at outside laboratories. Designs or develops new products, systems, and test procedures. Evaluate equipment and processes to ensure compliance with safety and environmental regulations Prepares requirement and procedural documentation as required. Devises new processes, or refines existing ones, to optimize the manufacturing process Works with engineering and shop personnel in fabrication of prototype products and development of methods and procedures for testing products. Report immediately all suspicious and hazardous conditions to a supervisor. Understand and observe all safety guidelines and assure quality and safety by complying with all appropriate CB policies and procedures. Assist in maintaining clean, orderly and hazard-free work areas. Able to work with minimal supervision, be a self-starter and be detail oriented. Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to demonstrate the following competencies: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, test plans, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to write and read English EDUCATION AND/OR EXPERIENCE: Bachelor's in Science in Engineering, or closely related field. Five years prior experience in a related field, industry, or work environment is required. Skills and experience to develop test procedures. Experience in developing product requirements and documentation. Experience in coatings synthesis, characterization, and application testing. Working knowledge of Microsoft Word, Excel, and Outlook or similar programs. SUPERVISORY RESPONSIBILITIES: This is not a supervisory position. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands and arms. Occasionally required to walk and sit. Required to work with various chemicals, adhesives, and composites. Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and depth perception. PERSONAL PROTECTIVE EQUIPMENT: Work primarily performed in a standard office environment. If in manufacturing areas, requires protective eyewear and/or hearing protection. WORK ENVIRONMENT: While performing the duties of this job, the employee may be exposed to moving mechanical parts. Occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. Noise level in the work environment is usually moderate. TRAVEL: Travel as required. CLICK BOND WAY - KEY ATTRIBUTES: Communicates respectfully to all team members, vendors, and visitors. Models a positive attitude. Actively listens to others and supports the team environment. Asks questions and learns from mistakes. Executes tasks with minimal errors in a timely and efficient manner. Attendance is consistent and meets or exceeds company standards. Click Bond is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information or any other protected classification. Click Bond complies with federal and state disability laws. Click Bond will provide reasonable accommodation when requested by a qualified applicant or employee with a disability unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact People Operations at ************ or email: *********************