Rexel Holdings USA jobs in Birmingham, AL

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($36,330.00 - $54,495.00) Target Bonus: % Req ID: 27331 Education and/or Experience Required - Machining knowledge. 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Must possess basic computer skills and ability. Preferred - Associate's Degree in Technical Studies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Schedule: 10pm - 6:30am Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is 36.96/hour. This role will also receive overtime compensation and shift differential. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING EPA 608 required LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

At UniFirst, we're a global leader in uniform rental and facility service solutions for businesses across industries - from manufacturing and food processing to healthcare and hospitality. With a reputation for superior service and long-term customer partnerships, every uniform, product, and service we offer comes with integrity, commitment, and hard work. Come join a team that always delivers! Why Join Us?: Sell essential, recession-resistant services Represent a trusted brand with high customer retention Be part of a supportive sales team that offers consistent 1:1 coaching, ongoing sales learning, and real growth opportunities Position Summary: We're seeking a high-performing B2B Sales Representative to drive new business growth in an assigned territory. The ideal candidate thrives on prospecting, closing complex contracts, and building long-term relationships with business clients. Key Responsibilities: Prospect and qualify leads across a defined territory through cold calling, networking, referrals, and in-person visits Conduct on-site assessments and presentations for uniform rental, floor care, restroom, and facility service programs Develop tailored proposals and close multi-year service agreements Maintain and update CRM with accurate client information and activity Meet or exceed monthly and quarterly sales quotas Collaborate with service and operations teams to ensure seamless customer onboarding Compensation & Benefits Competitive base salary + monthly uncapped commissions and quarterly bonuses Monthly car allowance and fuel card Medical, dental, vision, 401(k) with match Paid time off and holidays Career advancement opportunities into Sales management or National Accounts Qualifications What We're Looking For: 0-2+ years of B2B sales experience (uniform rental, industrial supply, waste management, safety gear, or janitorial services preferred) Proven track record of exceeding sales targets and managing a full sales cycle Strong negotiation and closing skills Self-motivated and goal-oriented Willingness to take coaching and feedback Valid driver's license, clean driving record, and a reliable vehicle Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

This is a hybrid role with 50% on-site requirement in Wilmington, MA. We are seeking a highly analytical, self-driven Senior Financial Analyst to join our FP&A team. This role provides broad visibility across the business and requires strong ownership, curiosity, and the ability to thrive in a fast-paced environment. The ideal candidate combines financial experience with the ability to turn data into insights and influence decisions. You will partner closely with senior leadership and cross-functional teams to lead budgeting, analyze performance, and communicate key financial and operational trends. Success in this role requires driving deep into business, challenging assumptions, identifying risks and opportunities, and delivering forward-looking insights that drive results. Responsibilities: The selected candidate will be able to perform the following duties with or without a reasonable accommodation: Business & Financial Analysis Analyze monthly financial results, investigate trends and anomalies, and clearly communicate key performance drivers, risks, opportunities, and recommendations to finance and business leadership. Own portions of the annual budgeting, forecasting, and long-range planning processes. Develop and enhance financial reporting and dashboards that drive business decisions. Business Partnership & Decision Support Build strong relationships with regional and functional leaders across operations, sales, service and other areas. Partner with business leaders to support strategic initiatives and business cases with sound financial analysis. Communicate insights clearly and confidently to senior leadership in both written and verbal formats. Reporting & Modeling Participate in the preparation of the timely and accurate P&L and KPI reporting packages. Support ongoing and ad hoc reporting and analysis requests with a continuous improvement mindset. Develop and maintain financial models to support scenario analysis, forecasting, and strategic planning. Ownership & Initiative Learn the drivers of the business to deepen insights into financial results and future performance. Manage multiple priorities efficiently with minimal direction, while maintaining accountability for quality and deadlines. Continuously look for ways to streamline processes, improve reporting, and drive better decision-making. Qualifications Bachelor's Degree in Finance or Accounting, Economics, or related field. Advanced Excel and financial modeling skills. 5+ years of progressive financial analysis or FP&A experience. Strong analytical and problem-solving abilities with a high level of accuracy, attention to detail, and intellectual curiosity. Proven experience working independently, managing projects, and driving results with minimal supervision. Excellent communication and storytelling skills, including the ability to translate complex data into clear insights. Strong interpersonal skills with demonstrated success building relationships across all levels of the organization. Working knowledge of U.S.GAAP or core accounting principles. Preferred Experience with Oracle EPM, Hyperion, Smart View, Essbase, or similar applications. Experience with SQL querying. Experience with Power BI, Tableau, and/or other data visualization tools. MBA,CPA, CFA or similar advanced credential. Experience supporting senior leadership in a fast-paced, matrixed environment. The estimated annual salary for this position ranges from $82,500- $110,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst offers a Fleet of Benefits, 50+ to be exact! 401K with Company Match Profit Sharing Health Insurance Employee Assistance Program Life Insurance Supplemental Life Insurance Long Term Disability Vacation Sick Time Paid Holidays Direct Payroll Deposit Tuition Reimbursement 30% Employee Discount Employee Referral Program Where will a UniFirst Career take you? As an industry leader in the rental, lease and sale of uniforms and facility services products, UniFirst Corporation has grown to become one of the largest companies in the garment services industry. UniFirst is recognized on the Forbes “Platinum 400 - Best Big Companies” List. With over 14,000 employee Team Partners and more than 250 facilities throughout the United States, Canada, Mexico and Europe, you are never just a number when you work for UniFirst. What sets us apart from all other companies is that we still function as a family run business. When you work for UniFirst, you're family! UniFirst Corporation has a strong history of promoting from within. In fact, most of UniFirst's Senior Managers have come from within the Company. Opportunities are endless for those individuals who possess a strong work ethic, a commitment to quality, and above all else, a passion for delivering quality customer service, both internally and externally. Our culture is what makes UniFirst an organization that stands out from the rest. Are you interested in loving your job? Find out just how far a career with UniFirst can take you. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Customer Development Representative UniFirst is seeking a motivated, self-driven individual for a Customer Development Representative position to increase sales within existing customer accounts in a dedicated market territory. As a Customer Development Representative, you will leverage warm relationships with existing customers to increase overall organic growth and profitability by selling additional products and services. Responsibilities of the Customer Development Representative: Assist existing clients by identifying opportunities and leveraging their current partnership with UniFirst by offering additional services, products and solutions Work with the Customer Service team to develop strategies to further develop our market share Conduct presentation meetings with potential clients as needed Each Customer Development Representative will be responsible for achieving 80 activities per week, including 8 Facility Needs Analysis meetings, 3 presentations and 1 sale UniFirst offers the Benefits you need to excel as a Customer Development Representative: Competitive base salary - Annual earnings range from $51,000 to $125,000 + (base salary + commission) Incentives based on monthly sales Uncapped monthly commissions Protected territory Industry-leading sales training Vehicle Mileage and cell phone reimbursement Cutting edge sales tools, including a data management device with CRM software Full range of benefits including 401k and profit sharing, health and life insurance, Employee Assistance Program (EAP), disability coverage, vacation, sick time, paid holidays, tuition reimbursement, 30% employee discounts, and more A Career with UniFirst Offers: Training: With the most in-depth training platform in the industry, our employees get top quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Mobility: We're a growing company offering significant avenues for personal development and growth, and providing for continued career progression. Some companies like to promote from within, we love to! Technology: UniFirst's many cutting edge sales tools and innovative programs are designed with one purpose in mind - to help you succeed. Family Culture: Our unique family-like culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we know it takes many kinds of people to make us successful. Qualifications Qualifications High school diploma Required; Bachelor's or Associate's degree preferred Proficiency with Mobile Technology, Microsoft Office Suite, and CRM Outside business-to-business sales or route sales experience preferred Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards Company Overview: UniFirst is an international leader in the $18 billion dollar garment services industry. We currently employ 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our outside sales team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date Job Location: Fort Morgan, CO Job Type: Full Time Shift(s) Available: 3rd Compensation: $28.75/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc… Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Required Qualifications Eligible to work in the U.S. without visa sponsorship 18 years or older High school diploma or GED Able to read, write, and speak English Basic computer skills (Windows 7/10, Microsoft Office) Familiarity with Allen-Bradley PLCs (basic programming & troubleshooting) Comfortable learning new software and systems (PLC/HMI) Willing to work 6 days a week Preferred Qualifications Experience in a food processing environment Proficient in Allen-Bradley PLC programming (RSLogix 500/ControlLogix 5000, FactoryTalk View) Skilled in installing and troubleshooting Ethernet-based industrial networks Able to read schematics and perform machine installation/repairs Knowledge of basic electrical circuits (24V & 120V AC/DC) 2-year degree in electrical/electromechanical tech or 3+ years in industrial controls/networking Bilingual in English/Spanish or English/Somali Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

This position will support the Commission Department and report to the Sales Commission Supervisor. The ideal candidate will be very organized with an analytical mindset and attention to detail. Strong Excel knowledge along with the ability to multi-task. This position will research, verify, and validate that all sales credit and commission payout comply with Corporate Policy and Compensation Plans. Review sales commissions for accuracy and compliance to Corporate Policy and Compensation Plans Work directly with Sales Managers and/or Location Managers to resolve any issues Analyze credit and commission data on a weekly basis to provide forecast models and various reports Calculate qualifying sales for monthly commission payout Meet deadlines in timely manner Perform account reconciliations as needed Ensure all supporting backup is verified to accurately payout commissions Utilize multiple databases to ensure accuracy of commissions Respond to sales inquiries in a timely manner Excellent written and verbal communication skills Organized, strong follow up skills Able to work independently and exercise discretion Attention to detail Other duties as needed Qualifications Experience: Strong Microsoft Excel abilities (pivot table, vlookups) Familiarity with the AS/400 system is a plus Accounting background a plus Education: Bachelor's Degree preferred Additional Requirements: Able to multi-task while meeting deadlines. Must be accurate with numbers. Work independently and exercise discretion. The estimated annual salary for this position ranges from $58,000 to $62,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $16.50 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26071 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Determine the best method to manage and complete a project by a designated due date. • Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. • Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. • List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. • Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. • Coordinate work assigned through various auxiliary work centers and equipment as required • Occasionally assist operators and maintenance with machine or processing issues. • Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. • Effectively communicate with other personnel and educate apprentices in best practices. • Adhere to all written specifications and ensure compliance with all standards. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: • Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. • Must pass the skilled trades assessment test for this position • Proficiently operate all common machining equipment, mills, lathes, grinders, etc. • Work as a team lead as well as a team member depending on the departmental workload. • Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Time management skills and the ability to work to deadlines in a fast-paced environment. • Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. • Work from design prints, sketches, sample parts and oral instructions. • Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. • Personally possess basic inspection and machining tools to effectively perform job. • Available to work second shift, overtime and weekends as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

JOIN TEAM TRILOGY: At Trilogy, you'll experience a caring, supportive community that values each team member. We prioritize meaningful relationships, genuine teamwork, and continuous growth. With the stability of long-term care, competitive pay, and exceptional benefits, Trilogy offers a work environment where you're supported, appreciated, and empowered to thrive in your career. If you're ready to join a team committed to your success, Trilogy is where you belong and thrive! WHAT WE'RE LOOKING FOR: The Qualified (Certified) Medication Aide (QMA or CMA) assists with administering medications to residents as directed by the physician, nurse supervisor, and Director of Nursing (DON). Additionally, this role assists residents with activities of daily living. Key Responsibilities The Qualified (Certified) Medication Aide sets up, administers, and records certain prescribed medications for residents in the facility under the supervision of a licensed nurse and as allowed by State regulatory agencies. Practice the five rights of medication administration within the scope of your role. Assist residents with activities of daily living as needed. Properly label, store, receive and destroy medication per company policy. Perform medication charting as directed by the Nurse Supervisor/Charge Nurse. Qualifications Certified as a Qualified Medication Aide (QMA) or Certified Medication Aide (CMA) by the state and maintain a Certified Nursing Assistant (CNA) Certification in good standing with the state. 0-1 years of relevant experience preferred WHERE YOU'LL WORK : Location: US-IN-Elkhart LET'S TALK ABOUT BENEFITS: Our comprehensive Thrive benefits program focuses on your well-being, offering support for personal wellness, financial stability, career growth, and meaningful connections. This list includes some of the key benefits, though additional options are available. Medical, Dental, Vision Coverage - Includes free Virtual Doctor Visits, with coverage starting in your first 30 days. Get Paid Weekly + Quarterly Increases - Enjoy weekly pay and regular quarterly wage increases. Spending & Retirement Accounts - HSA with company match, Dependent Care, LSA, and 401(k) with company match. PTO + Paid Parental Leave - Paid time off and fully paid parental leave for new parents. Inclusive Care - No-cost LGBTQIA+ support and gender-affirming care coordination. Tuition & Student Loan Assistance - Financial support for education, certifications, and student loan repayment. GET IN TOUCH: Demond ************** APPLY NOW: Since our founding in 1997, Trilogy has been dedicated to making long-term care better for our residents and more rewarding for our team members. We're proud to be recognized as one of Fortune's Best Places to Work in Aging Services, a certified Great Place to Work, and one of Glassdoor's Top 100 Best Companies to Work. At Trilogy, we embrace who you are, help you achieve your full potential, and make working hard feel fulfilling. As an equal opportunity employer, we are committed to diversity and inclusion, and we prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. NOTICE TO ALL APPLICANTS (WI, IN, OH, MI & KY): for this type of employment, state law requires a criminal record check as a condition of employment.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Utility Worker to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be assisting with maintaining the location building and equipment systems by performing; basic maintenance and plant utility functions, loading and unloading deliveries, painting, operating industrial equipment, and plant cleaning / blowdowns. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Utilize equipment to perform plant cleaning operations, this includes,: floor scrubbers, lint and dust removal devices, outside rubbish removal, equipment cleaning, and pit / trench screen cleaning. Perform miscellaneous painting tasks throughout the plant or outside on facility grounds. Operate powered industrial forklifts / lifts throughout the facility to assist in relocating materials. Assist in loading and unloading trucks Assist with production receiving activities. Perform various levels of facilities upkeep including landscaping, snow removal, and other removal operations. Perform light equipment maintenance tasks, trench screen cleaning, lint and dust blowdown of facilities and equipment, fluid level checks, light bulb replacement, ceiling tile replacement, cart cleaning and repair, and pressure washing after appropriate training from UniFirst. Upon proper training and certification, may be called upon to operate Company vehicles such as shuttle trucks or route trucks. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. At least 2 years of relevant experience is preferred. Must be 18 years of age or older Valid driver's license and a safe driving record are required. Ability to work independently with little or no supervision. Must be able to operate powered industrial equipment (forklifts, floor scrubbers, scissor lifts) and other similar tools as required. Experience using basic hand and power tools is required. Ability to read, comprehend and interpret procedures and instructions in English. Ability to effectively present information and respond to questions from co-workers and managers. Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

We Always Deliver for our customers and our people. Become a Strategic Account Representative (SAR) and join our team! Your main responsibility will be to sell our products and services to medium to large potential clients in your assigned territory. You will use our top-notch Sales Enablement tools and processes to secure new business within the B2B sector. Total compensation (including commission) can range from $75,000-125,000+ annually. Empowering Achievement: We understand that our dedicated Team Partners are the driving force behind our company's success. We provide resources such as: regular 1:1 coaching, continuous sales training, cutting-edge technology, and career development opportunities to elevate your professional growth. What Your Role Entails: Generate revenue by acquiring new clients to meet sales objectives Schedule and conduct in-person meetings with qualified leads Develop and deliver presentations to prospects about our services Maintain a strong pipeline of potential customers Devise strategies to boost sales Support in implementing and overseeing target account strategies Regularly meet with leadership to strategize Stay informed about competitors and market trends Unlock Limitless Earning Potential: Our comprehensive compensation package includes: Competitive Base Salary Monthly Commission New Hire Ramp-Up Bonus Quarterly Bonus Program Weekly Car Allowance Monthly Cell Phone Reimbursement Annual President's Club trip for top performers Full suite of benefits including 401K match, profit sharing, health and life insurance, Employee Assistance Program (EAP), disability coverage, vacation, sick time, paid holidays, tuition reimbursement, 30% employee discounts, and more. You will benefit from: Paid top-tier sales training Exposure to sales and executive leadership Protected selling territories Cutting edge sales tools, devices, and software Development through our Award-winning Sales Training Program Qualifications You will have: 3+ years of proven successful B2B sales experience Valid Driver's license and reliable transportation Proficiency with MS Office products Experience with Customer Record Management (CRM) Systems Experience with Sales Enablement Tools; Seismic is preferred High School Diploma or GED - College degree is a plus Internal candidates will be required to have a proven track record of success, as well as completion of company specific training and certifications UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Electromechanical Technician ***$5000 Hiring Bonus*** Charter Wire is a leading Tier 1 supplier and manufacturer of Engineered Shaped Wire, Cold Finished Bar, and Cold-Headed and Stamped Components to various industries, including Automotive, Agriculture, Construction, Consumer, Industrial, and Oil & Gas. Charter Wire is a member of the Charter Manufacturing family of companies. Why Work Here: SCHEDULE: Get a dependable 8-hour first shift, Monday-Friday, with occasional overtime. BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off. GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement-we promote from within. SAFETY: Work in an environment committed to safety and continuous improvement. STABILITY: Join an established Midwest company with four generations of family ownership. Position specifics: Location: Charter Wire - 7850 N. 81st Street, Milwaukee, WI 53222 Shift: 10:00 PM - 6:00 AM, Monday-Friday What You'll Do: As an Electromechanical Technician, you'll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment. Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices Perform preventive maintenance to reduce downtime and ensure equipment reliability Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals Collaborate with cross-functional teams to support continuous improvement Follow safety protocols and use appropriate PPE Support process improvements and participate in ongoing training What You'll Need: Technical degree in a related field, journeyman's card, or 5+ years of industrial maintenance experience Proficiency in reading complex electrical schematics and code books Broad knowledge of electrical codes, electronic controls, and electrical theory Experience with line setups, inspections, and electrical testing equipment Strong math skills (fractions, percentages) Nice to Haves: Experience with PLCs and drives (Allen Bradley, Siemens) Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems Experience with welding/torch equipment and precision measuring tools Excellent communication and teamwork skills Problem-solving mindset and eagerness to keep learning Physical Requirements: Frequent standing and walking Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs Minimal climbing and lifting over 100 lbs Ability to meet physical demands with or without reasonable accommodation Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire. We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

3405 4th Avenue South, Birmingham, AL Employment Type: Full-time Contract Type: Permanent Job Family: Supply Chain & Warehousing Experience Level (for career site): Early Professional ** Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. **** **We are looking for a Wire Cutter to join our Mayer team in Birmingham, AL!** **Summary:** Employee's level and pay will be dependent on their level of experience, knowledge, and capabilities. The Wire Cutter - Combined is responsible for efficiently and accurately fulfilling orders for wire and cable cuts utilizing material handling equipment and wire reeling / coiling machinery. Ensures wire/cable is stored, staged, and cut in a manner that meets company standards for safety, security, accuracy, and productivity. May be required to fill in for other warehouse roles. **What You'll Do:** + Contribute to a culture and environment focused daily on employee safety and a safe work environment. Follows established Standard Operating Procedures, Environmental Health and Safety Rules, and immediately addresses safety concerns + Perform daily machine checks and operates any material handling equipment and powered material handling equipment in a safe and efficient manner that meets company standards for safety, security, accuracy, and productivity + Retrieve and cut wire efficiently and accurately for requested customer shipments Examines wire for conformance to specifications and removes defective pieces + Fill all orders efficiently and accurately. Ensures outbound shipments are accurate and free of damage + Place reel of specified wire onto payout spindle of machine and threads wire through feed rolls. Adjusts machine controls to regulate factors such as wire thickness, pressure, heat, and cutting and stripping length + Stack/store merchandise in the appropriate area and stages wire cuts in the appropriate shipping area + Maintain a minimum standard in wire cuts in compliance with current company policies in both accuracy and productivity + Report any damage to electronic hardware, work machines, or pipe racks immediately to a supervisor + Perform other duties as assigned **Job Duties Disclaimer:** The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. **Qualifications** **What You'll Need** + 1+ years of wire cutting experience preferred + Prior warehouse or distribution center experience a plus + Certification to operate forklift, hand truck, pallet jack and other warehouse equipment preferred. If required to make deliveries: + Must have a valid driver's license + Must be at least 21 years of age + Must pass a pre-employment and annual review of their Motor Vehicle Record + Must obtain verification of non-expired medical certificate as required by law within 60 days of hire + Must not have had a suspended drivers' license for a traffic accident/violation within the past 3 years + Must not have any at fault accidents in the past 3 years + High School or GED - Preferred **Knowledge, Skills & Abilities** + Knowledge of Radio Frequency scanning devices preferred + Must be willing to be trained on all the following material handling equipment: forklift, stand-up reach truck, High-Reach Narrow-Aisle, Stand-Up Rider pallet Jack that conform to OSHA safety training requirements + Ability to effectively communicate with co-workers and customers + Ability to handle basic issues and problems + Ability to perform basic mathematical calculations to accurately complete job tasks + Ability to organize and prioritize job tasks and requirements + Excellent organizational and time management skills + Ability to meet deadlines + Ability to work overtime as needed + Basic computer knowledge **Additional Information** **Physical Demands:** + Sit: Must be able to remain in a stationary position - Frequently - 21% to 50% + Walk: Must be able to move about inside/outside office or work location - Constantly - at least 51% + Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly - at least 51% + Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Frequently - 21% to 50% + Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally - up to 20% + Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly - at least 51% **Weight and Force Demands:** + Up to 10 pounds - Constantly - at least 51% + Up to 25 pounds - Constantly - at least 51% + Up to 50 pounds - Constantly - at least 51% **Working Environment:** + Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Constantly - at least 51% + Exposed to electrical hazards; risk of electrical shock - Occasionally - up to 20% + Handles or works with potentially dangerous equipment - Frequently - 21% to 50% + Travels to offsite locations - Occasionally - up to 20% Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law. **Our Benefits Include:** + Medical, Dental, and Vision Insurance + Life Insurance + Short-Term and Long-Term Disability Insurance + 401K with Employer Match + Paid vacation and sick time + Paid company holidays plus flexible personal days per year + Tuition Reimbursement + Health & Wellness Programs + Flexible Spending Accounts + HSA Accounts + Commuter Transit Benefits + Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few. + Employee Discount Programs + Professional Training & Development Programs + Career Advancement Opportunities - We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.