Rexel Holdings USA jobs in Tallahassee, FL - 179737 jobs

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members Run routes for team members', experience different stores, and meet new customers Grow sales on the route by building relationships, selling in displays, and completing national initiatives Attain a route with set days off/schedule with time Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: Be 21 years of age or older Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: 401(k) contribution Health, dental and vision insurance Financial support to help obtain a degree Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy.

Merchandisers are critical to our success at FritoLay! Merchandisers are responsible for merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos & many more in stores including supermarkets and large grocery stores. Although you will start out as a Merchandiser for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Drive your personal vehicle (with gas mileage reimbursement) to a variety of store locations * Retrieve FritoLay products and merchandise the product throughout the store * Work in a team environment with professional Route Sales Representatives * Follow a consistent schedule with specific start times and customers (You will have the opportunity to attain different work schedules with time!) * Leverage a company issued iPhone to view schedules, communicate with team members, and log activity We operate 24 hours a day, so you may not have a typical schedule, and our jobs are physical! If you have never worked in this environment, it is fun, fast-paced, and physical - you should expect that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: * Be 18 years of age or older * Have a valid driver's license with proof of insurance * Be able to frequently lift up to 40 lbs. with or without a reasonable accommodation Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ********************************************************************************** 2. *******************************************************************************************

Great Opportunity at MI Windows and Doors in Millersburg!! Weekend Shift Available (Friday - Sunday schedule - 6am - 6pm) Starting Hourly Rate is $ plus $ Shift differential! Operators are to communicate clearly with the laborer to ensure quality production. Inspect all parts before and after lamination. Set the machine up and do changeovers to meet the plant's demands. If you take pride in what you do and have a desire and ambition to tackle new challenges, then we have an opportunity for you! Our company offers a very robust Benefit Package which includes Company-Funded Health Savings Account & Paid Holidays! Come Grow with MITER! We are a local, family-owned company with a coast-to-coast presence. We offer cross training and opportunities for career growth. We encourage our team members to take on new roles, advance their careers and offer tuition reimbursement. Team member health and safety are top priorities. POSITION SUMMARY: Lamination-Laborer is to assist the operator with machine setup. Also will cut scrap, foil and primer pads when needed. Load and unload parts from baskets and stack them on the table. Feed and cut parts going into and coming out of the machine. Follow the general instructions of the operator. ESSENTIAL FUNCTIONS: 1. Loading and unloading of parts from baskets and/or trailers. 2. Trim and Wool (bulb) parts (with correct wool/bulb in correct slot). 3. Inspect quality before and after lamination. 4. Cut scrap when needed. 5. Cut and set primer pads, ensures proper coverage for the entire run. 6. Set drive and guide wheels. 7. Read and understand lamination schedules. 8. Count parts. 9. Distinguish types and color of foils. 10. Change glue on hot melt system when needed. 11. Clean and prep glue head. 12. Set up slitter and cut foil to correct sizes. 13. Able to read and understand lamination prints. 14. Work together as a team and communicate with each other. 15. Clean up after each run and prepare for the next. 16. Performs additional duties as assigned. QUALIFICATIONS: Must possess a valid PA driver's license and a working telephone. KNOWLEDGE / SKILLS / EXPERIENCE: 1. High school graduate or GED are required. 2. Must be able to read/write and understand the English language. 3. Must be able to compute basic math, adding, subtracting, multiplication & division. 4. Must be able to use/read a tape measure, and saws. 5. Basic knowledge and use of hand tools. 6. Computer skills/knowledge of general computer operations. 7. Able to perform essential functions with or without accommodation. 8. Must possess a valid PA driver's license and a working telephone. 9. Ability to concentrate and pay close attention to perform the essential job functions. 10. Interpersonal skills are necessary in order to effectively communicate with co-workers. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

WITH APPROXIMATE HOURS OF 11PM TO 7:30AM. Work with a team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. Maintain cleanliness of maintenance shop. Follow proper lock-out/tag-out procedures. Assist to ensure adherence to all company, state and federal regulations. All other relevant duties to the job. Manufacturing equipment repair experience required. Ability to replace basic component parts on equipment. Mechanical diagnostics and repair experience. Knowledge of wire belt and plastic conveyor repairs, and sprocket alignment and installation.

$3,500 Sign-on Bonus (based on performance and eligibility) Detailers are critical to our success at FritoLay! Our Detailers are responsible for merchandising FritoLay's complete line of quality products in local stores. As a Detailer, you will drive your personal vehicle to a variety of store locations, retrieve Frito-Lay products from the backs of stores, and ensure that our products are both fresh and attractive to our customers when out in the store. This is the perfect role for someone who is interested in part-time work! Although you will start out as a Detailer for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Driving to assigned locations in your personal vehicle (we'll provide mileage reimbursement while you're on the clock) * Checking in and out with manager on duty * Merchandising cases from the back room to the sales floor, filling display units or shelves with products * Rotating products and removing defective and out-of-date products * Tidying up shelves and displays, knocking down boxes and disposing of any waste * Assembling and disassembling of temporary displays We operate 24 hours a day, which means you may not have a typical schedule, and our jobs are physical! We transform store aisles, end caps, and displays into works of art, from the lowest shelf to the highest shelf, so you can expect to be on your feet for a majority of your shift. Here are the minimum qualifications of this job: * You are 18 years of age or older * You will be required to work on weekends, holidays, as well as off shift * You have reliable or personal transportation to work * You have a have a valid driver's license with proof of insurance * You can repeatedly lift, carry, push, pull, and handle products with or without a reasonable accommodation * You are able to lift 15 to 40 pounds with or without a reasonable accommodation Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. As a part-time team member, you are eligible to receive company benefits. Here is a breakdown of what we offer: * Vacation time, including two weeks after one year of continuous full-time employment, eligible for up to one week during first year of continuous, full-time employment * Paid sick leave that adheres to Washington law All benefits are subject to eligibility terms described in applicable plan and policy documents All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ************* pepsicojobs. com/wp-content/uploads/sites/2/2025/12/EEO_is_the_Law.pdf 2. *************pepsicojobs.com/wp-content/uploads/sites/2/2025/12/2026-EEO-policy-All-ATS.pdf

This is a hybrid position, supporting our Little Rock, AR and Shawnee, OK locations. Candidates are ideally located in the Northwest Arkansas area. Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. *Job Overview* As a Sr Process Engineer, you are responsible for providing expert support in process standardization and capability improvements in plastic processing and innovative technologies for injection molding operations. You will function as a technical resource to ensure that injection molding operations process standards for Georg Fischer are compliant. * Implements best practices and drive continuous improvement initiatives across all injection molding sites. * Supports sites in process optimization and control, such as cost reduction, quality improvement, etc. * Develops and drives professional training in Injection Molding. * Supports standardized injection molding processes. * Fosters collaboration, sharing knowledge, and driving innovation across the organization's injection molding operations to enhance operational performance and competitive advantage. * Provides technical support in procurement of injection molding machines (specification, acceptance test, ramp up) * Supports sites in mold concept design, shrinkage and mold qualification. * Explores Injection Molding technology trends relevant for Georg Fischer. * Performs feasibility test for new technologies and processes. * Keeps innovative technology in injection molding of equipment, processes and automation. * Trains / mentors Manufacturing/Process Engineers, Process Specialists and Manufacturing Maintenance Technicians. * Works closely with manufacturing groups to maintain a seamless transition of new molds and new equipment to production. _*Requirements*_ * Bachelor's degree in mechanical engineering, Plastics/Polymer Engineering, Industrial Engineering, or a related field; equivalent work experience may be considered in lieu of a degree. * Minimum of 10 years of hands-on experience in Injection Molding Process Engineering or a closely related discipline. * Experience with semi-crystalline and amorphous plastics and ability to process materials through various types (makes) of injection molding and extrusion machines. * Experience in troubleshooting and optimizing plastic processing, including shrinkage management, mold qualification, post-molding operations, auxiliary equipment integration, and product testing. * Experience with Root Cause Analysis techniques. xevrcyc * Ability to travel 50% or more. EOE Job Type: Full-time Pay: From $85,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Tuition reimbursement * Vision insurance Education: * Bachelor's (Required) Experience: * Plastics injection molding: 10 years (Required) * Root cause analysis: 1 year (Required) Willingness to travel: * 50% (Required) Work Location: Hybrid remote in Little Rock, AR 72206

A nonprofit organization located in Oak Brook is seeking an Assistant Executive Director for Finance and Administration. This role will act as the Chief Financial Officer, overseeing financial operations, budgeting, HR strategy, and compliance. The ideal candidate will have over 12 years of financial leadership experience, ideally within nonprofits, and possess a strong background in financial management and risk assessment. The position offers a competitive compensation package along with a hybrid working environment. #J-18808-Ljbffr

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications • Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). • Must be able to read and understand blueprints, specifications and routings • Ability to operate, adjust offsets; setup experience preferred, but not necessary • Ability to edit programs, fanuc controls, G code and M code programming • Requires mathematical skills that require the ability to add, subtract, multiply, and divide. • Must perform metric conversions. • Requires good oral and written communication skills in order to interact with employees. • Ability to true in jaws • Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience • Ability to work in a fast-paced environment. • Ability to communicate with all levels of the organization. • Ability to multi-task, establish priorities, set aggressive goals and achieve them. • Must be open to work overtime, as necessary. • 2 axis or 4 axis/live tooling • Ability to adjust taper on the OD/ID/face • Experience with tail stock and steady rests • Able to check pin size over threads • Knowledge of bore gages • Able to add extra passes to OD/bore/face if necessary • Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases "occasionally," "regularly," and "frequently" correspond to the following definitions: "Occasionally" means up to 1/3 of working time, "regularly" means between 1/3 and 2/3 of working time, and "frequently" means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time PI36cceed221ef-37***********5

AUTO BODY REPAIR TECHNICIAN NEEDED!!! below, then hit the apply button. Looking for a fresh start at a shop where your *skills, craftsmanship, and experience are truly valued*? Join the team at *Morris Ford*, a *family-owned dealership* with a reputation for quality and a focus on people. Our *state-of-the-art 15-bay body shop* features two modern paint booths, top-tier equipment, and a clean, professional environment. We're growing and looking for a skilled *Auto Body Repair Technician* to grow with us! -*2-5 YEARS AUTO BODY EXPERIENCE REQUIRED* -TEAM ORIENTED MIND SET -PUNCTUAL AND DEPENDABLE -ABLE TO WORK INDEPENDENTLY -ABLE TO READ AND FOLLOW ESTIMATES -ABLE TO FOLLOW MANUFACTURER REPAIR PROCEDURES -KNOWLEDGE OF FRAME MEASURING AND PULLING PROCEDURES -USE RESISTANCE SPOT WELDER PER MANUFACTURER'S SPECIFICATIONS -HIGH ATTENTION TO DETAIL -MUST HAVE A VALID DRIVERS LICENSE -UNIFORMS PROVIDED Work Remotely xevrcyc * No Job Type: Full-time Benefits: * 401(k) * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Experience: * Auto body repair: 2 years (Required) Ability to Commute: * Burnt Hills, NY (Required) Work Location: In person

8721 Oak Ridge Hwy, Knoxville, TN 37931 Monday through Friday 8am - 5pm Watch YouTube video for a full overview of the daily duties: **************************** The Order Fulfillment Associate is essential to the success of the organization, ensuring accurate and efficient order fulfillment, timely shipping, and satisfactory customer service through retrieving parts from the warehouse, processing returns, and issuing credits. Key Responsibilities and Essential Job Functions Customer Relations - Internal and External Collaborating with other team members to ensure efficient workflow and teamwork High levels of customer satisfaction 2. Fulfillment Assist in receiving and processing incoming shipments. Maintain accurate inventory levels by performing cycle counts and restocking items. Accurately and efficiently fulfill customer orders while ensuring timely shipment and maintaining inventory accuracy by processing returns and issuing credits. Process and fulfill customer orders and retrieve parts from warehouses or other locations. Inspect and clean parts, package appropriately, and prepare for shipping. 3. Continuous Improvement Continuously improve order fulfillment processes and procedures to increase efficiency and customer satisfaction. 4. Safety Maintaining a clean and organized work environment to promote safety and efficiency. 5. Perform Other Duties as Assigned Requirements Qualifications & Requirements High school diploma or GED is required. One year of experience in warehouse or logistics environments, including understanding inventory management and operating material handling equipment, preferred. Forklift Certificate preferred. Automotive experience preferred. Strong written and verbal communication skills are required with a commitment to act with an elevated level of professionalism during all transactions both internally and externally. Ability to read, write and comprehend instructions, short correspondence, and memos. Must be able to work effectively alone or with others in a team environment. Must be able to work collaboratively across functions. Share expertise with others. Must be a self-starter with the demonstrated ability to meet timelines and schedules related to essential functions described above. Must demonstrate strong attention to detail and strong organizational skills with the ability to prioritize and manage multiple tasks. Physical Demands & Work Environment The physical demands described herein are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Must be able to ambulate throughout the facility for most of the workday. May work outdoors exposed to changing weather conditions (rain, sun, snow, wind, etc.) for varying amounts of time. Must be able to operate equipment in a workstation. Work in an area equipped with forklifts, chain hoists, and other tools as needed. Ability to use both hands regularly with enough dexterity to operate basic hand and power tools safely. Ability to lift, move, and carry objects and materials up to 50 lbs. with or without assistance. Expected work hours are based on role and location. Ability to work occasional overtime as needed as determined by the employee's supervisor. Benefits: Health, Dental, Vision insurance Life insurance Health savings plans 401k Matching PTO Holiday pay Salary Description 17.00

Provides transportation for adults who have intellectual and developmental disabilities. The Vehicle Operator ensures the safety of the vehicle for operations, assists ambulatory and wheelchair-bound individuals in entering and exiting the vehicle, and ensures individuals are properly seated and secured, providing assistance when required. The Vehicle Operator is responsible for regulating heat, lighting, radio, and the ventilation system for the comfort of vehicle passengers. The Vehicle Operator is responsible for maintaining daily transportation logs and written reports; as well as ensuring that the vehicle interior and exterior is clean. Minimum Education & Experience * High school diploma or GED preferred. * Three years of experience driving. Experience working with people who have intellectual and developmental disabilities is helpful. Licensure/Certification Requires a clean Driver's License, Class B or C. Prefer candidates that meet requirements for DOT and 19A certification. Prefer CDL with P endorsement but will train to get CDL within 6 months of employment. Must obtain and maintain valid CPR/1st Aid certification Routes/runs are not permanent and will change as needed by the department

Aquatic Bathware, part of American Bath Group (ABG), is a premier manufacturer of innovative and durable bath products, trusted by builders, remodelers, and homeowners across the country. With a strong reputation for quality, design, and customer service, we offer a wide selection of tubs, showers, and accessible bathing solutions to meet a variety of needs. Do you have the right skills and experience for this role Read on to find out, and make your application. We are currently looking to add a *Maintenance Manager* to our team in Lancaster, TX. This role is responsible for overseeing and coordinating the industrial maintenance programs at assigned manufacturing sites. This role ensures that equipment, facilities, and systems are maintained in a safe, reliable, and efficient condition to support production goals. *Primary Responsibilities* * Direct and coordinate all maintenance activities across two sites, ensuring alignment of practices, standards, and goals. * Lead, coach, and develop site-based maintenance supervisors, technicians, and support staff. * Develop, implement, and standardize preventive and predictive maintenance programs across both locations; ensure maintenance schedules minimize production downtime while maximizing equipment reliability; maintain accurate records of maintenance activities, inspections, and repairs. * Oversee repair, installation, and servicing of machinery, mechanical systems, electrical systems, and building infrastructure; ensure critical spare parts inventory is managed efficiently and available when needed. * Partner with operations to support continuous improvement and equipment upgrades. * Ensure all maintenance activities comply with OSHA, EPA, and other regulatory requirements; drive a culture of safety, enforcing lockout/tagout and other workplace safety procedures. * Manage annual maintenance budgets for assigned sites; track maintenance costs and identify cost-saving opportunities without compromising safety or quality; negotiate and manage contracts with vendors, contractors, and service providers. * Travel regularly between sites to provide oversight, coaching, and support to on-site maintenance teams; share best practices and standardize maintenance policies and procedures across both locations. * Act as the primary point of contact between site leadership teams for all maintenance-related matters. *Required Skills/Abilities* * Strong knowledge of mechanical, electrical, pneumatic, and hydraulic systems. * Familiarity with CMMS (Computerized Maintenance Management Systems. * Excellent leadership, communication, and team development skills. * Strong organizational and project management abilities. * Ability to balance multiple priorities across multiple locations. *Education & Experience* * Bachelor's degree in engineering, Industrial Technology, or a related field required. * Minimum of five (5) years of industrial maintenance experience, with at least 3 years in a leadership role. * Experience managing maintenance in a manufacturing or industrial environment preferred. * Multi-site management experience is strongly preferred. *Physical Requirements* * Comfortable working in an office setting within a manufacturing facility, with occasional interaction on the production floor. * Prolonged periods of sitting and working at a computer. _American Bath Group is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws._ Job Type: Full-time Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Health insurance * Life insurance * Paid time off * Referral program * Vision insurance Application Question(s): * What is your desired base rate of pay on an annual basis? xevrcyc * Will you now or in the future require Sponsorship for an employment VISA? Education: * Bachelor's (Required) Experience: * Industrial maintenance: 5 years (Required) * Management: 3 years (Required) Ability to Commute: * Elizabethtown, PA 17022 (Required) Work Location: In person

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr

Long Term Maintenance - No Per Diem Work Hours Mon - Thurs 7:00AM - 3:30PM Must pass pre-employment physical and background Must pass welding test Job Requirements: AWS certified welder. Required site specific welding test for Mig and Tig SUMMARY Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS- Work within precise limits or standards of accuracy.- Make decisions based on measurable criteria.- Apply basic mathematics to solve problems.- Plan work and select proper tools.- Visualize objects in three dimensions from plans and drawings.- Compare and see differences in the size, shape and form of lines, figures and objects.QUALIFICATIONSMay require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.PHYSICAL REQUIREMENTS1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLSNP Not PresentO Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

REQUIREMENTS - *RAILROAD EXPERIENCE A MUST* Ensure daily inspections are performed on all equipment. Operate Rail car mover on and off tracks and ensuring all proper gauges are working. Operating the rail car mover on roadways as well as on the tracks while taking all commands from groundman via radio. Operate as groundman to make all rail switches, count in rail cars, connect rail cars, connect air lines, set rail car brakes, clearing walk/roadway and ensuring correct placement of rail car in substation, while keeping communication via radio with operator. As the groundman you are responsible for ensuring track safety and identifying track damage or any obstruction including de-rail devices that will cause for a derailment of the train. Groundman procedures include long distance walking in all weather conditions including snow, rain, heat and overnight which includes uneven terrains such as rock, dirt and mud. There is also climbing, and crouching involved as rail car brakes and air lines will need to be set and connected for all rail moves. This position is considered essential personnel, which will require you to work your scheduled shift given along with overtime. SUMMARY- Operate as a Shuttlewagon operator as well as a Groundman/Conductor to make rail moves for all necessary business units on-site. Move empty/loaded railcars, inter-plant switches, spotting loaded cars in unload stations and any other Management or Customer special request rail car movements in a timely manner while following all safety practices set forth by Brown and Root as well as DuPont. RESPONSIBILITIES - Sets up and operates production equipment in accordance with established guidelines and procedures. May be required to manipulate equipment on unlevel working surface. May be responsible for routine maintenance or repairs. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS- High School Diploma or Equivalent. 2+ years' experience in rail car movement (preferred) 2+ years' experience in heavy equipment operation. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. May be required to interpret load charts. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 5% Walking 5% Sitting 90% b. Lifting 10 lb. Carrying 10 lb. Pushing 50 ft-lb. Pulling 50 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. REQUIREMENTS - *RAILROAD EXPERIENCE A MUST* Ensure daily inspections are performed on all equipment. Operate Rail car mover on and off tracks and ensuring all proper gauges are working. Operating the rail car mover on roadways as well as on the tracks while taking all commands from groundman via radio. Operate as groundman to make all rail switches, count in rail cars, connect rail cars, connect air lines, set rail car brakes, clearing walk/roadway and ensuring correct placement of rail car in substation, while keeping communication via radio with operator. As the groundman you are responsible for ensuring track safety and identifying track damage or any obstruction including de-rail devices that will cause for a derailment of the train. Groundman procedures include long distance walking in all weather conditions including snow, rain, heat and overnight which includes uneven terrains such as rock, dirt and mud. There is also climbing, and crouching involved as rail car brakes and air lines will need to be set and connected for all rail moves. This position is considered essential personnel, which will require you to work your scheduled shift given along with overtime. SUMMARY- Operate as a Shuttlewagon operator as well as a Groundman/Conductor to make rail moves for all necessary business units on-site. Move empty/loaded railcars, inter-plant switches, spotting loaded cars in unload stations and any other Management or Customer special request rail car movements in a timely manner while following all safety practices set forth by Brown and Root as well as DuPont. RESPONSIBILITIES - Sets up and operates production equipment in accordance with established guidelines and procedures. May be required to manipulate equipment on unlevel working surface. May be responsible for routine maintenance or repairs. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS- High School Diploma or Equivalent. 2+ years' experience in rail car movement (preferred) 2+ years' experience in heavy equipment operation. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. May be required to interpret load charts. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 5% Walking 5% Sitting 90% b. Lifting 10 lb. Carrying 10 lb. Pushing 50 ft-lb. Pulling 50 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Job Summary: The Utility Technician is an entry level role. They will work closely with experienced shop and field techs and assist them as needed. They may be asked to perform repairs based on their skill set. Job Responsibilities: Perform daily and operational activities in the service department to include the following, but not limited to: Assist all service team members as needed Clean parts, scrape gaskets, prep for assembly Clean and prep all rental equipment Maintain safety and cleanliness of work environment Assist with lube truck work as needed Travel to jobsites and vendor training sessions as needed All other job duties as assigned by Service Manager, Rental Foreman, or Shop Supervisor Job Qualifications: Must have High School Diploma or equivalent, a 2 year technical degree or comparable military training is preferred Experience in the heavy equipment industry or a related field a plus Excellent written and oral communication and basic mathematical skills. Proficient with a computer, including the use of Microsoft programs (Word, Excel, PowerPoint, etc.) and diagnostic use using manufacturer provided programs. Must have a good working knowledge of equipment operations and mechanical functions. Ability to stoop, kneel, push, pull, twist and carry and lift up to 70lbs. Ability to climb and perform work on heights of 15 feet Able to work in all types of weather conditions Maintain excellent customer service Must be able to pass a background, physical, and drug screen

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$31.70-$40.55 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.