Electrician jobs at Roseburg

Key Responsibilities * Performs highly skilled electrical maintenance tasks including equipment installation * Repair and PM electrical machinery; this may include, but not limited to, such equipment as AC/DC motors, drives, pneumatic, hydraulic, conveyors and packaging systems and instrumentation and PLC controls * In downtime situations, must be able to analyze cause of breakdown with equipment * Must also determine and complete maintenance repairs required to return the equipment to effective operating conditions * Follow and adhere to safety lockout procedures and strictly adhere to plant safety rules as well as follow excellent housekeeping practices to help maintain a clean work environment * Must be able to work independently as well as in a group * Performs other duties as assigned * Models company core values * Required Qualifications * High school diploma or GED * Stable employment history with a minimum of four (4) years of experience in Industrial Maintenance work AND/OR equivalent education to include vocational/technical school certificate/diploma * Willing and able to work overtime, weekends, on-call and rotating shifts and holidays * Proficient in the use of hand and power tools * Experience with reading electrical drawings and schematics * Troubleshooting experience, including the use of necessary test instruments such as digital multi-meter, oscilloscope, megger, etc. * Experience using a computer for record keeping and documentation * Able to work in extreme heat/cold, navigate catwalks and ladders physical ability to perform the essential physical functions of the position, which includes climbing stairs, lifting up to 50 pounds, stooping and bending * Ability to communicate effectively and constructively * Comprehension of complex work instructions and documentation * Ability to work with mathematical concepts in an industrial environment * Team oriented * Willing and able to learn new jobs and skills * A personal and total commitment to observe all safety rules and regulations including NEC and NFPA70E (including LOTO and Arc Flash) * Knowledge of DC motors and motor controls * Knowledge of AC motors and motor controls * Knowledge of DC, VFD, and servo drives * Knowledge of single phase and 3-phase power distribution systems * Knowledge of various process instrumentation, including pressure, flow, temperature, level, weight, etc * Knowledge of PLC controls, HMI operator interfaces, and control systems networking * Working knowledge of basic industrial mechanical issues Preferred Qualifications * Experience with CMMS * Knowledge of fire alarm and protection systems * Experienced in pneumatic, hydraulic, and conveyor systems * Excellent skills in root cause analysis * Previous experience in Rockwell Software RSLogix5000 and FactoryTalk View Studio (Editor, Me, and SE), AB PowerFlex VFD's and Kinetics Servos, and Ethernet IP networks using AB Stratix switches AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Electrician MANSFIELD NIGHT ELECTRICIAN Our Night Electrician role offers a challenging, diverse and exciting opportunity to become part of our Maintenance team. In general, all Electrician roles are required to repair, install, replace, program, and test all electrical circuits, and equipment. Periodically perform or assist others in routine to moderately complex repairs or installation of automatic electrical and electronic controls. What you will do: Test electrical systems and circuits in electrical wiring, equipment or fixtures Inspect electrical systems, equipment or components to identify hazards, defects or repair Troubleshoot, program and upgrade Programmable Logic Controllers (PLC) Work with vendors to identify needed parts and recommend to Supervisor Understand and update instrumentation loop diagrams, E & I drawings, blueprints and schematics Program AC & DC variable speed drivers Update power distribution system, MCC and switch gears Install electrical equipment What you need to be successful: High School Diploma or GED Detailed and accuracy oriented Understanding of AC and DC control circuits Ability to read and interpret electrical schematics and wiring diagrams; have knowledge of 3 phase motor circuits, MCC's, power distribution and lighting circuits Ability to work outdoors in all temperatures in loud, high volume environments performing physical tasks throughout the shift Ability to perform the essential functions of the position which includes walking, standing, sitting, climbing stairs, bending and lifting-up to 50 pounds, climbing ladders, work in elevated work areas and tight close spaces Pass a basic written, oral and or visual electrical exam Offers of employment are contingent upon successful completion of a pre-employment background check, drug screen test and physical Preferred Skills: Proven troubleshooting skills; troubleshooting and tuning of PID loops; Pneumatics and hydraulics Allen Bradley family of PLC's and Powerflex drives and corresponding software Scanning and Optimization systems within the Lumber Business (Baxley, USNR) Process Network Communication Systems and Components-Ethernet & Fiber Optic Basic network topography and infrastructure What will make you stand out: Ability to perform all tasks in accordance with West Fraser safety policies and procedures to include performing safety observations, operate equipment according to safe work procedures and follow Zero Energy procedures. Must be willing to perform all job assignments in an effective and timely manner with minimal supervision Recognize and support our team culture, communicating effectively with all team members Ability to work nights, rotating shifts, holidays and weekends; ability to work overtime and willing to be on-call 24/7 Have 4-5 years of Electrician work experience in Industrial/Manufacturing environment Outstanding benefits package including: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical, Dental & Vision 401K with company match and additional retirement contribution Employee Stock Purchase Plan Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: ******************************************************** We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world's largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace (DFW) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Russellville, AR This role offers a challenging, diverse and exciting opportunity to become part of our Maintenance team. In general, all Electrician roles are required to repair, install, replace, program, and test all electrical circuits, and equipment. Periodically perform or assist others in routine to moderately complex repairs or installation of automatic electrical and electronic controls. What you will do: Perform routine electrical/electronic preventative maintenance on mill equipment Responsible for the repair, modification, and maintenance of a variety of electrical and electronic equipment Perform tasks like wiring circuits, replacing components, and repairing electronic devices Performs test reading using several different instruments, including multi-meter and Megger. Remain current in technical changes or equipment designs by attending classes as needed. Work rotating shifts, which includes nights, holidays, weekends, and overtime as scheduled or required. Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training. Other duties as assigned What you need to be successful: High School Diploma or GED Basic reading, writing, and arithmetic skills Background in Electrical fundamentals Must have knowledge in 3 phase and single-phase power distribution systems, motor controls, wiring, and troubleshooting of such systems. Experience with 480-volt power and logic circuits Strong computer, math, analytical, and planning skills Must be able to understand and follow electrical schematics proficiently without supervision Familiar with machine control systems Ability to troubleshoot (complex) machine control systems Identify the features and functions of controllers Describe and compare pneumatic and electronic controllers Identify the signal path through a control circuit A combination of higher education and experience will be taken into consideration Eligible to legally work in the United States without employer sponsorship Willing and able to work a schedule which will include nights, weekends, and holidays Willing and able to work on an emergency call-in basis when required Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance What will make you stand out: VFD drives experience PLC Experience Able to interpret PLC logic as it relates to its application to process and equipment for troubleshooting purposes Outstanding benefits package including: Competitive starting pay Benefits starting Day 1 On-the-job training A culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Wellness Incentives Employee Referral Program Safety is one of West Fraser's core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: *************************** We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world's largest producer of oriented strand board (OSB). Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within - many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides itself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Electricians earn $41.36 to $45.52 per hour We train and promote from within Excellent low-cost health benefits Retirement plan with employer-paid contributions Paid vacation and 10 holidays At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. We are a fourth-generation family-owned company that has grown to be one of the largest lumber and millwork producers in the United States. Our more than 6,000 employees are proud to work at our state-of-the-art sawmills and other facilities, including: manufacturing, custom wood-framed windows, fabrication, millwork, veneer, cogeneration, trucking, forestry, and other operations. Our division in the charming small town of Noti, Oregon is seeking a qualified swing shift Electrician for our sawmill. Noti is nestled in the foothills of the beautiful Central Oregon Coast Range mountains, and the Long Tom River passes through this quaint community. Come live, work, and play in this small-town outdoor community! About the Position * Install, maintain, and repair electrical systems and equipment in manufacturing facility * Maintain all components required to control machinery, including switches, sensors, programmable logic controllers, variable frequency drives, and operate interface units * Recognize and effectively identify hazards and correct electrical defects * Perform preventative maintenance on all electrical systems and equipment * Inspect and maintain motors, switches, junction boxes, switch panels, circuit breakers, transformers, fuse panels, and lighting * Read and interpret blueprints, schematics, and electrical specifications to determine layout of industrial electrical installations * Install electrical conduit and pull wire * Maintain efficiency and safety of all plant electrical circuits, assembles, and equipment * Troubleshoot and install encoders, linear transducers, vision systems, and other advanced sensors * Identify and help implement process improvements to optimize performance and production * Effectively troubleshoot issues for best resolution while staying calm in stressful situations * Communicate effectively, comprehend, and follow complicated verbal and written instructions * Perform general maintenance in a safe and efficient manner and maintain a clean work area * Work may consist of overtime during busy production times Qualifications * 2 years' recent verifiable related work history or equivalent education * Licensed through the state of Oregon to perform electrical work * Understanding of industrial electrical safety, MCCs, three-phase power, running conduit, lighting, electrical, and hydraulic systems required * Familiarity with programmable logic controllers and their programming, preferable * Read and understand blueprints and circuit diagrams Why Join Our Team? Because this is more than an invitation, it's a commitment to offer opportunities for personal and professional growth to everyone! We ask people to grow with us and make the company even better. We provide an excellent benefit package including a full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums, a 401(k) with Company Match, additional Retirement Contributions, and company-paid Life Insurance. How to Apply If you are qualified and would like to join our team, please apply in person Monday through Friday from 8am to 4pm. Let's talk! Sierra Pacific Industries 22476 Fir Street Noti, OR 97461 ************** or apply online and view all our career opportunities at: spi.careers Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. About Our Company Sierra Pacific Industries is a fourth-generation family-owned company based in Northern California that started in 1949 and has grown to be one of the largest lumber and millwork producers in the U.S., employing around 6,500 crew members. Sierra Pacific continues to be a company where its employees are proud to work at state-of-the-art facilities and others strive to become part of the team. We own and sustainably manage more than 2.4 million acres of timberland in California, Oregon, and Washington. Our forests are sustainably managed under a 100-year plan by Registered Professional Foresters, Wildlife Biologists, Botanists, and other professionals. We are sustainably growing forests for our future, planting over 6 million new trees every year. In Spring 2024, we planted our 300 millionth seedling on our timberlands. This milestone was decades in the making, reflecting our commitment to sustainable forest management and ensuring we have forests not just for today, but for generations to come. Sierra Pacific effectively uses nearly 100% of every piece of wood we bring to our facilities. In fact, any small amount that isn't turned into hand-crafted doors and windows, millwork, lumber, or landscaping material is actually converted into electricity in our eight biomass-fueled power plants. We are proud that all Sierra Pacific facilities follow our drug-free and tobacco-free policies. As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We use E-verify to verify the social security number and work authorization of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. At Sierra Pacific Industries, we understand our greatest strength is the people who choose to build a career with us. What does it mean to be part of the Sierra Pacific family? It means you are a valued team member and part of a growing, fourth-generation family-owned, forest products company built on hard work, innovation, and wise investments. With around 6,500 crew members in over 30 states, Sierra Pacific offers many opportunities for personal and professional growth; from entry-level to skilled trades, from truck drivers to sales managers, from foresters to engineers - for everyone! We invite you to learn more about our history, our 2.4 million acres of forestlands, and our state-of-the-art wood product and window manufacturing facilities at ************************ As part of our safety in the workplace policy, an offer of employment is subject to a negative drug screen result. We are also proud that all Sierra Pacific facilities follow our tobacco-free policy. Sierra Pacific adheres to E-verify to verify the social security number of all newly hired employees. Sierra Pacific is an (EOE) Equal Opportunity Employer, including those with a disability and veterans. If you are an individual with a disability and need accommodation to complete the application process, please call ************ or write to Sierra Pacific Industries at PO Box 496011, Redding, CA 96049.

This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Coated Products area of Big River Steel facility. Duties and Responsibilities: Troubleshoot, repair, and perform preventative maintenance on complex electrical equipment, including PLCs, control circuits, communication systems, I/O field devices, and VFD drives/motors Install or modify electrical equipment following electrical code, manuals, schematic diagrams, and other specifications with minimal instruction after general assignment Use Electrical Ingenuity and Work directly with all mechanics and operations personnel in a fast-paced environment to help develop a safety focused and productive Coated Products Team. Support maintenance teammates to help maintain a positive and efficient work environment focused on safety and reliability. Qualifications: Demonstrated safety focus and willingness to proactively apply it in a team environment Quality and detail oriented with strong technical and analytical problem solving skills Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge Reliable team player with good communication skills Highly motivated, self-directed, and willing to put in extra hours when needed Demonstrated proficiency using precision measuring instruments Experienced with mobile equipment. ( Rough Terrain, Man Lift, Fork Lift Carry Deck or Broaderson) Efficient in the Metric Measuring System a plus Basic computer skills; MS Excel, Word, and Outlook is a plus Read Electrical drawings, blueprints, diagrams and schematic drawings to determine work procedures Knowledgeable of programming and troubleshooting logic to include ladder logic, function block programming Knowledgeable of VFDs, principle design, programming, and trouble shooting skills; I.O. systems and design layout; three-phase motors and ability to troubleshoot; network infrastructure; basic mechanical components in a mill; basic Hydraulic systems, how they operate and design layout Willing to learn and take on multiple roles, such as mechanical and production positions as well as continually improve on primary skill set HS diploma or equivalent is required; electrical degree or training is preferred Working Conditions and Physical Requirements: Environment is typical for a steel mill production areas, with extreme temperatures, high noise levels, and dusty/ greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12 hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime.

Ensure policies, procedures, and all activities are carried out to support BRS goals and objectives at the Caster on their respective crew assignments. Duties and Responsibilities: Repair complex electrical equipment, including automated machines, controls, panels, relays, circuit breakers, communication systems, VFD drives. Install electrical equipment with minimal instruction after general assignment. Diagnose problems, replace or repair defective equipment. Troubleshoot and repair complex hydraulic problems. Work with Production to help develop and maintain a Highly Productive Team. Qualifications: Has strong working knowledge of 480 volt 3-phase electrical distribution systems Has PLC programing experience in Siemens and or Allen Bradley Quality and Detail oriented Strong Technical Analytical/ Problem solving skills Good insight into team dynamics and a positive team player Good verbal communication skills; self-motivated Must be willing to put in extra hours when needed Working Conditions and Physical Requirements: Environment is typical for a steel mill production area, with extreme temperatures, high noise levels, and dusty/greasy areas. Scheduled work hours are 4 on, 4 off, rotating shift work, which includes days, nights, weekends, and holidays. Supervisory Responsibility: This position does not supervise others

THE ROLE: The Electrician/Controls Technician is responsible for maintaining electrical system infrastructure that ensures a safe and effective manufacturing environment. This position also maintains facilities and production equipment to operate in the safest and most productive condition, supporting continuous improvement, production strategies, and plant reliability strategies. Performs basic and skilled preventive and corrective electrical maintenance on plant systems and equipment; assists in the prioritization of electrical work Performs system evaluations, electrical design and automation system programming support for all plant manufacturing operations Performs root-cause analysis, troubleshoot, repair, and maintain mechanical and electrical equipment such as: blending, cooking, conveyor, scaling, filling, cartooning, coding/printing compressed air, vacuum, hydraulic and refrigeration systems Troubleshoot electrical wiring, relay logic, control and safety circuits Troubleshoot electronic boards, PLCs, touch screens, displays, contactors, and motors Sets up and calibrates instrumentation and systems Interpret electrical schematics, mechanical drawings, blueprints, and layouts Follows electrical preventative maintenance programs; inspects and repairs electrical operating equipment as necessary Uses computer systems to keep accurate records; documenting PLC program info, system failures and troubleshooting efforts, work orders, preventative maintenance, etc. Works with minimal supervision and is self-motivated Participates in a safe, food safe and respectful work environment, by following company policies, processes and SOPs and proactively communicating concerns or ideas. Uses knowledge of electrical safety to ensure the company adheres to governmental regulatory programs and policies including electrical codes, fire codes, arc flash, etc. Maintain food safety and food quality through completing job task and maintaining work areas in a sanitary manner. Participate in food safety training. Report food safety problems to personnel with authority to initiate action. Performs other duties as needed and directed to support the goals of the company Work Environment/Physical Requirements: Oregon Ice Cream contains office, manufacturing and outdoor workspaces where this position is required to access and work. The position requires a person to be able to frequently walk, stand and climb; bend and twist; see, hear and talk; use hands to finger, handle or feel tool, controls or products; use hands and arms to reach, hold and carry tools or products. Frequently lifting/moving up to 50lbs is also required; occasional lifting/transferring of objects may be required with assistance up to 75 lbs. This positions also requires a person to handle environments of different temperatures and with various food allergens present. QUALIFIED CANDIDATES WILL HAVE: Minimum 3 years related or equivalent experience in a manufacturing environment High school diploma (or equivalent) required; associate's degree or trade school education with demonstrated learnings in electrical maintenance and PLC preferred Oregon LME or General Journeyman License preferred Extensive and demonstrated experience with PLCs, HMIs, automation and controls systems, and related troubleshooting; Allen Bradley preferred Understand and use practical problem solving methodology Strong attention to detail Ability to multi-task while remaining calm and working effectively under pressure Ability to communicate effectively in the English language; speak, understand, and read written and verbal instructions, policies and procedures Ability to work a flexible schedule, including overtime, weekends and holidays Ability to perform required tasks safely, in a fast paced work environment; ensuring food safety, people safety, quality and efficiency standards are achieved Positive attitude and a passion for quality food and ice cream a plus! Oregon Ice Cream is an Equal Opportunity Employer committed to a safe and drug free workplace. We consider applicants for all positions without regard to race, color, religion, sex, national origin, citizenship status, age, disability, political affiliation or belief, or any other legally protected status.

We are seeking a skilled and reliable Electrician for the Swing Shift position at our facility in Grants Pass, United States. As a key member of our maintenance team, you will be responsible for providing essential electrician services throughout our facility, ensuring the smooth operation of our equipment and systems. Repair, install, and maintain building wiring systems, motor control circuits, and electronic circuits Run electrical conduit within the building and on machinery Perform preventive maintenance on facility equipment and recommend improvements Troubleshoot and resolve electrical issues in a timely manner Read and interpret electrical schematics and building drawings Provide wiring control circuit drawings as needed Conduct basic troubleshooting of PLCs (Programmable Logic Controllers) Assist in safety maintenance throughout the facility, offices, and company property Schedule, coordinate, document, and log all daily and project work Support production goals, including working flexible hours when required Perform general cleaning in areas after maintenance work is completed Assist with production and facility equipment moves Complete all work orders in the designated system Participate in and sustain continuous improvement initiatives Qualifications Valid Electrician journeyman license (required) Proven experience in industrial or manufacturing electrical work Proficiency in reading and interpreting electrical schematics and building drawings Strong knowledge of building wiring systems, motor control circuits, and electronic circuits Experience with running electrical conduit and basic PLC troubleshooting Forklift certification and demonstrated competence in operation Thorough understanding of lock-out procedures for facility equipment Ability to make decisions requiring considerable judgment on diverse work Excellent problem-solving skills and attention to detail Strong communication skills, both verbal and written Ability to work independently and collaboratively in a team environment Physical capability to lift heavy equipment and work in various positions Flexibility to work swing shift hours and adapt to changing priorities Commitment to safety and quality in all aspects of work Additional Information Swing Shift: 3:00pm - 11:30pm $37-$42 an hour/DOE For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools , empowering the team and moving forward , and is kept alive by our more than 14,000 associates across 20-plus manufacturing facilities and offices. Visit ******************* to learn more and join us in building great experiences together ! Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].

Your Career Begins at Timken! Timken is a U.S manufacturing company with over 125 years of business. If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Job Type: Full-Time Shift: Day shift & night shift available Schedule: Multiple schedules available Pay Range: $35/hr or $40/hr, based on experience. What We Offer Competitive Pay Comprehensive benefits package, including medical, dental and vision coverage. Benefits start on first day of employment. 401(k) retirement savings plan with generous company match. 10 paid holidays per year plus paid vacation. Paid parental leave at one year of service. Employee discounts on products and services Education expense reimbursement, eligible to apply at first day of employment. Education expense reimbursement at one year of service. Opportunities for professional development and career growth Position Summary: Timken is seeking a dedicated and skilled Manufacturing Electrician to join our team. In this role you will troubleshoot electrical issues and repair machinery to decrease production down-time This role requires strong PLC experience, intermediate knowledge of electrical principles, attention to detail, adherence to safety and quality standards and the ability to work effectively as part of a team. Essential Responsibilities: Troubleshoots/Diagnoses any type of eletrical, logic, or electronic equipment by tracing and testing circuits and inspecting proper working conditions. Receives wiring diagrams, blueprints, specifications and instructions from supervisor. Inspects, repairs, installs, and maintains all eletrical, electronic, and logic equipment. Dismantles, inspects, repairs, adjusts or replace faulty parts and wiring. Reassembles and tests equipment for safe and proper orientation. Performs various related assignments such as soldering parts and adjusting automatic controls on electrical, electronic, and logic units. Collaborate with team members and management to achieve production goals. Follows all safety protocols and guidelines to ensure a safe working environment. Maintain a clean and organized work area. Basic Qualifications: High School Diploma or GED. 18 years of age or older. Must be eligible to work in the U.S. Preferred Qualifications and Skills: Experience as a Manufacturing or Industrial Electrician within a manufacturing environment. 3-5 years of work experience working with PLCs, robotics, or CNCs. Electrical aptitude and understanding of machine operation. Ability to read and interpret specifications, acceptance criteria and engineered drawings. Strong attention to detail and a quality-focused mindset. Effective communication skills and ability to work well in a team environment. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences, and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status, or any other basis protected.

Job DescriptionElectrician - Journeyman License or Supervisor License required JOB PURPOSE: This position will be responsible for the day to day performance of the plant maintenance. This includes overseeing Electrical and Maintenance operations in a safe and efficient manner and includes responsibility for technical training, determining work load, project management and coaching and development of team members. The successful execution of these responsibilities will result in providing a high level of services to the production team; improve plant productivity, which will ultimately result in the success of the Plant. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Electrical License Required - Journeyman License or Supervisor License Perform tasks and PM's related to Electrical needs of facility Leads safely by following SOP's, LOTO, PPE's, Fall Protection and Confined Spaces to achieve plant and departmental goals. Perform metal fabrication, cutting, welding and finishing. Performs Electrical PM's on Baggers and equipment Electrical knowledge preferred of bulk flour systems. (Transfer blowers, air-locks, diverter valves, sifters, etc) PLC Experience preferred - can be trained Use shop and hand tools safely and properly. Climb ladders, access platforms from 6 to 75 feet, occasionally. Lift, push, and pull using proper techniques up to 50 pounds frequently and up to 200 pounds occasionally. Work in confined spaces, underneath, over and next to moving equipment safely. Can walk and stand for work periods for up to 10 hours when needed with 2 - 15 minute breaks and 1 half hour lunch break. **Overtime required to cover department absences / work up to 12 hours with 3 - 15 minute breads and 1 half hour lunch break Ensures compliance with all company policies. Works in tandem with maintenance/planner to maximize the effectiveness of the maintenance work order system to utilize MP2. Performs all electrical preventative maintenance on equipment as scheduled Fill out daily log reports, emergency breakdown reports, work orders, and communication with incoming shift Ability to work on high voltage and 120 - 480 vac equipment, starters, motors, vfd's, sensors, controllers, photo-eyes, etc Install, debug and stabilize plant equipment as required Read Schematics and blue prints in order to interpret, diagnose, and troubleshoot electrical issues to properly and safely repair Perform electrical repairs and upgrades of machinery and equipment to ensure proper operations Builds and maintains outstanding employee relations with other departments. Read and interpret HMI panels to troubleshoot production line faults Performs electrical and distribution Lock Out / Tag Out method steady with customary safety protocol Facilitate to ensure all electro and mechanical safety requirements follow Newly Weds Foods and OSHA standards Ability to climb stairs, ladders and ability to work at heights Performs other duties as assigned. Flexible in scheduling to meet business needs / over time required Provide ‘on call' coverage as needed ESSENTIAL SKILLS AND ATTRIBUTES: Leadership and Management Creates an environment that encourages and rewards teamwork and collaboration, both internally and externally Developing problem solving skills, implements solutions to solve root cause problems. Ability to analyze problems Communications Strong written, oral, and communication and developing facilitation skills Excellent listener. Empathetic to individuals concerns and directs necessary follow-up actions Conveys information in understandable terms at all levels of the organization Technical Capability Possess knowledge of manufacturing processes and operations Strong technical skills in operation systems (NWF applications). Possess ability to operate a computer; Knowledge of Windows based software; Knowledge of basic functions of manufacturing process software (i.e. Wonderware, Excel, Word, Packaging equipment present and learn new, etc.). Developing project management skills. Possess the ability for planning and scheduling skills. Be able to make informed decisions and effectively implement solutions Is able to troubleshoot technical and relational situations Developing the ability of qualitative thinking skills- results oriented, cost/benefit analysis Forklift Certification desirable Possess knowledge of the following: Safety regulations within manufacturing environment Metal fabrication and welding processes Safety regulations within Maintenance functions Coaching, Motivating, and Mentoring Safety oriented: understands safety is a top priority Developing the ability to set expectations, tracks results, and manages accountability Is a role model who is developing the ability to develop people. Is confident to give people space to learn and make mistakes Personal and Social Competence Possess and develops interpersonal skills: Communication, Leadership, Empowerment, and Customer Service. Attention to detail a must Promotes and is a role model with high integrity and honesty, promoting trust in all actions High energy, energetic, and a self-starter Compensation: $34/hr - $42/hr

Electrician - Journeyman License or Supervisor License required JOB PURPOSE: This position will be responsible for the day to day performance of the plant maintenance. This includes overseeing Electrical and Maintenance operations in a safe and efficient manner and includes responsibility for technical training, determining work load, project management and coaching and development of team members. The successful execution of these responsibilities will result in providing a high level of services to the production team; improve plant productivity, which will ultimately result in the success of the Plant. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Electrical License Required - Journeyman License or Supervisor License Perform tasks and PM's related to Electrical needs of facility Leads safely by following SOP's, LOTO, PPE's, Fall Protection and Confined Spaces to achieve plant and departmental goals. Perform metal fabrication, cutting, welding and finishing. Performs Electrical PM's on Baggers and equipment Electrical knowledge preferred of bulk flour systems. (Transfer blowers, air-locks, diverter valves, sifters, etc) PLC Experience preferred - can be trained Use shop and hand tools safely and properly. Climb ladders, access platforms from 6 to 75 feet, occasionally. Lift, push, and pull using proper techniques up to 50 pounds frequently and up to 200 pounds occasionally. Work in confined spaces, underneath, over and next to moving equipment safely. Can walk and stand for work periods for up to 10 hours when needed with 2 - 15 minute breaks and 1 half hour lunch break. **Overtime required to cover department absences / work up to 12 hours with 3 - 15 minute breads and 1 half hour lunch break Ensures compliance with all company policies. Works in tandem with maintenance/planner to maximize the effectiveness of the maintenance work order system to utilize MP2. Performs all electrical preventative maintenance on equipment as scheduled Fill out daily log reports, emergency breakdown reports, work orders, and communication with incoming shift Ability to work on high voltage and 120 - 480 vac equipment, starters, motors, vfd's, sensors, controllers, photo-eyes, etc Install, debug and stabilize plant equipment as required Read Schematics and blue prints in order to interpret, diagnose, and troubleshoot electrical issues to properly and safely repair Perform electrical repairs and upgrades of machinery and equipment to ensure proper operations Builds and maintains outstanding employee relations with other departments. Read and interpret HMI panels to troubleshoot production line faults Performs electrical and distribution Lock Out / Tag Out method steady with customary safety protocol Facilitate to ensure all electro and mechanical safety requirements follow Newly Weds Foods and OSHA standards Ability to climb stairs, ladders and ability to work at heights Performs other duties as assigned. Flexible in scheduling to meet business needs / over time required Provide ‘on call' coverage as needed ESSENTIAL SKILLS AND ATTRIBUTES: Leadership and Management Creates an environment that encourages and rewards teamwork and collaboration, both internally and externally Developing problem solving skills, implements solutions to solve root cause problems. Ability to analyze problems Communications Strong written, oral, and communication and developing facilitation skills Excellent listener. Empathetic to individuals concerns and directs necessary follow-up actions Conveys information in understandable terms at all levels of the organization Technical Capability Possess knowledge of manufacturing processes and operations Strong technical skills in operation systems (NWF applications). Possess ability to operate a computer; Knowledge of Windows based software; Knowledge of basic functions of manufacturing process software (i.e. Wonderware, Excel, Word, Packaging equipment present and learn new, etc.). Developing project management skills. Possess the ability for planning and scheduling skills. Be able to make informed decisions and effectively implement solutions Is able to troubleshoot technical and relational situations Developing the ability of qualitative thinking skills- results oriented, cost/benefit analysis Forklift Certification desirable Possess knowledge of the following: Safety regulations within manufacturing environment Metal fabrication and welding processes Safety regulations within Maintenance functions Coaching, Motivating, and Mentoring Safety oriented: understands safety is a top priority Developing the ability to set expectations, tracks results, and manages accountability Is a role model who is developing the ability to develop people. Is confident to give people space to learn and make mistakes Personal and Social Competence Possess and develops interpersonal skills: Communication, Leadership, Empowerment, and Customer Service. Attention to detail a must Promotes and is a role model with high integrity and honesty, promoting trust in all actions High energy, energetic, and a self-starter Compensation: $34/hr - $42/hr

Requirements The primary responsibilities of an Electrician will include (but are not limited to): Works with inspectors to ensure all fuel and forecourt dispensing equipment/lighting is wired to code and installed properly. *Petroleum Experience Required* Pulls and/or wires conduit, wire dispensers, and breaker panels. Installs emergency stop systems and wires/installs lighting. Effectively analyzes problem situations pertaining to breakdowns and recommend to customer actions necessary to correct situation. Exhibits a professional demeanor and promotes goodwill between the company and customers by providing a superior level of customer service. Observes, analyzes, and determines corrective course of action for service and repair of customer equipment/fixtures. Performs necessary repairs to correct analyzed situations in a professional and productive manner. Performs maintenance on equipment/fixtures according to Company policies and procedures. Follows safety rules and ensures that hazardous materials are disposed of properly. Opens and closes work orders with Dispatch, provides service repair narratives (written and verbal) for customer, and submits paperwork for time worked and repairs completed in a neat, accurate and timely manner. Accounts for 100% of paid time. Responsible for maintaining personal tools required for performing the job effectively and safely. Responsible for following customer's safety and housekeeping guidelines when performing repairs at customer site. Performs related duties as assigned or as the situation dictates. Safety driving a company vehicle. Required Education and Experience: A minimum of a high school diploma/GED and preferably four years of work experience as a licensed electrician in commercial/residential environments (commercial preferred). Must provide proof of license. A minimum of two years work experience in a service/electrical field related industry to be considered for electrical apprentice. Excellent people skills and verbal communication is necessary. Knowledge of mechanical and electrical equipment. Skilled in providing excellent customer relations by exchanging information with courtesy and consideration. Ability to exhibit a professional demeanor and develop customer relations and superior service. Ability to effectively communicate (written and verbal) with all levels of an organization internally and externally. Ability to read and interpret schematics and understand necessary service and training manuals. Ability to perform arithmetic calculations involving fractions, decimals, and percentages. Ability to understand and follow verbal and/or demonstrated instructions. Ability to maintain a good understanding of industry innovations and product availability in order to make recommendations based on customer needs. Ability to safely operate personal hand tools. Ability to draw upon available support resources from within the company and recognize when it is appropriate to do such. Such other knowledge, skills, and abilities as are necessary in connection with additionally assigned duties. *Petroleum Experience Required* Supervisory Responsibility: This position has no direct supervisory responsibilities. Training Requirements: General Safety. Lock-out Tag-out. HAZMAT. Electrostatic Discharge Awareness. Foreign Object Damage Awareness. Quality System Awareness. Work Environment: While performing the duties of this job, the employee is frequently standing and kneeling for long periods. The employee is occasionally exposed to a variety of extreme surroundings that are not limited but include electrical hazards. The position regularly works near moving mechanical and electrical parts indoors and in outside conditions that may include inclement weather, heat and humidity, and exposure to dust and asphalt. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. The employee must frequently lift and/or move 25-40 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Personal Protective Equipment: Safety Glasses and hard hats required while performing certain tasks. Position Type/Expected Hours of Work: This is a full-time position. Evening and weekend work may be required as job duties demand. Travel: Local travel is expected for this position. Insurability requirement: Must possess a valid driver's license and maintain a good driving record. Work Authorization/Security Clearance: Security clearance may be required for this position. EEO Statement As an Equal Employment Opportunity employer, it is Guardian Fueling Technologies' policy to provide equal employment opportunity for all applicants and employees. Guardian Fueling Technologies does not unlawfully discriminate on the basis of race, national origin, sex, pregnancy, color, religion, age, physical or mental disability, legally-protected medical condition, veteran status, marital status, sexual orientation, or any other basis protected by state or federal laws. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. GFT is a Drug Free Workplace. GFT offers a generous benefit package that includes a awesome 401K match, Paid Holiday, Vacation and much more!

We need Lead Electricians with a minimum 5 years residential lead experience and hand tools. Must be able to read blue prints, wire and trim out houses, manage a crew of men. Must be neat, courteous and willing to work. Benefits include (6) paid holidays, vacation pay, medical, dental, vision & 401k.

Requirements Skills and Abilities High School Diploma or General Education Degree (GED) preferred A State Electrical license, technical certificate or a minimum of 3-5 years of related experience and/or training or any equivalent combination of education and experience Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions and decimals. Demonstrated skills in leadership, organization and communication are necessary Ability to anticipate problems and implement appropriate preventative measures Ability to develop new techniques for work processes Ability to redirect to issues as they emerge and reprioritize based on current business conditions Must possess excellent communication skills and be able to multi-task Be organized and able to plan, prioritize and follow through on projects assigned with minimal supervision Ability to carry out the responsibilities in accordance with the organization's policies and procedures and OSHA laws Physical Requirements Requires use of proper body mechanics with pushing, pulling, reaching, lifting, squatting, kneeling and bending Pushing/pulling and lifting up to 50 lbs Requires fine motor hand and arm movement, manual dexterity and coordination Requires near visual acuity Requires working around and operating departmental equipment Must be able to access and navigate each department in the facility Requires the ability to function in a professional manner under stressful circumstances Work Environment While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The employee is occasionally exposed to hazardous materials. A production employee regularly works near moving mechanical parts. Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: Medical Dental Vision Life and AD&D Policies Short and Long-Term Disability 401K with Company Match Paid Time Off Paid Volunteer Time Off Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

Southworth International Group, Inc., located in Manila, AR, has an immediate opening for an Production Electrician Southworth is the world s largest manufacturer of ergonomic material handling equipment for vertical lifting and work positioning. Our products are designed to improve worker productivity while reducing the potential for worker injuries. Anywhere that workers are lifting and positioning items, handling pallets, working with parts in containers or transporting loads in a factory or warehouse, Southworth has a product to make the job faster, safer, and easier. We realize that our success is a direct result of the efforts of our talented and dedicated employees. To ensure continued success we take extra care to make sure that careers at Southworth are financially, intellectually, emotionally, and socially rewarding for all. We offer a generous time off policy, 401k match, affordable health and vision coverage, tuition reimbursement, development plans for career growth, and a fun engaged workforce! Key Responsibilities: Wiring electrical components Read and understand blueprints and other specification and communicate as a set of instructions as well as troubleshoot electrical issues as needed Communicate with other departments Maintain a clean and safe work environment Perform other duties and complete other assignments as may be requested or assigned Required Qualifications: Ability to participate in the Southworth Electrical Apprenticeship Program or comparable experience 1+ years of experience in the electrical department preferred Proven communication skills Computer literacy Experience functioning as a team member, learning throughout the organization and supporting needs of all buildings Ability to bend, twist, reach, grasp with fingers; stand for extended periods of time; lift up to 50 pounds SIGI is an Equal Opportunity Employer: You will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status or disability. We re only hiring those authorized to work in the United States. We do not currently sponsor immigration visas. SIGI does not accept unsolicited resumes from search firms or employment agencies. Any unsolicited resume will become the property of SIGI.

Job DescriptionWe, at LPFP - Salisbury, a Leggett & Platt company, are searching for an Electrical Maintenance Mechanic within our Maintenance team to help support our Carpet Underlay business. We have been manufacturing carpet underlay for over 22 years and are considered a full-scale recycler. If you join our team, your work will ensure people across the world have a little more comfort in their lives. As an Electrical Maintenance Mechanic, you will have the opportunity to assist in working on projects that will improve current processes in the manufacturing of carpet underlay. Your contributions will have a direct impact on the business by ensuring that our facility follows all electrical requirements. The team you will be working with collaborates to ensure that projects are completed in a timely manner, and values great workmanship. So, what will you be doing as a Maintenance Electrician? Perform electrical maintenance and repairs on plant machinery and electrical systems that are generated through work orders. Perform Preventative Maintenance on machinery and electrical systems. Troubleshoot and repair electrical systems for plant machinery and electrical systems. Use various machines, hand tools and power tools to accomplish assigned tasks. Maintain equipment and perform basic repairs when needed. Periodically check products to ensure quality and uniform completion; resolve any identified problems and alert manager. Performs other related duties as assigned. To be successful in this role, you'll need: Have at least 2 years Electrical Maintenance experience. Ability to safely install and repair electrical systems, apparatus, and electrical/electronic components of industrial machinery and equipment. Ability to replace faulty electrical components of machines, such as relays, switches, and motors, and positions sensing devices using hand tools. Ability to diagnose and repair or replace faulty electronic components. Ability to diagnose and replace faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Ability to follow manuals, schematic diagrams and blueprints using hand tools and test equipment to connect power supply wires to machines and equipment. Maintain equipment and do basic repairs as needed. Available to work on required Saturday's. Things We Consider a Plus: Understanding and ability to apply NFPA 79 standards. 2+ years working in a manufacturing setting. What to Do Next Now that you've had a chance to learn more about us, what are you waiting for! Apply today and allow us the opportunity to learn more about you and the value you can bring to our team. Once you apply, be sure to create a profile, and sign up for job alerts, so you can be the first to know when new opportunities become available. Our Values Our values speak to our shared beliefs and describe how we approach working together. Put People First reflects our commitment to safety and care of each other, learning and development, and creating an inclusive environment of mutual respect, empathy and belonging. Do the Right Thing focuses us on acting with honesty and integrity, delivering the results the right way, taking pride in our work, and speaking the truth - good or bad. Do Great Work…Together occurs when we engage without hierarchy, collaborate as a team, embrace challenges, and work for the good of all of us. Take Ownership and Raise the Bar demonstrates our responsibility to add value and make a difference, challenge the status quo and biases to make things better, foster innovative and creative solutions to drive impact, and explore new perspectives and embrace change. Our Commitment to You We're actively taking steps to make sure our culture is inclusive and that our processes and practices promote equity for all. Leggett & Platt is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veteran status, and more. Join us! We welcome and encourage applications if you meet the minimum qualifications. Even if you do not meet the preferred qualifications, we'd love the opportunity to consider you. Equal Employment Opportunity/Veteran/Disability Employer For more information about how we handle your personal data in connection with our recruiting processes, please refer to the Recruiting Privacy Notice on the “Privacy Notice” tab located at ************************** Powered by JazzHR 0zVDxHWOJt

ENTEK is a major Oregon employer and an enabler of global clean energy with headquarters in Lebanon Oregon. We are a top producer of separators for both lithium and lead acid batteries, best in class twin screw extruders and machinery for the plastics industry, and we have a full complement of engineering services to provide our customers with excellent products and services worldwide. Our success is fueled by consistently living our core values of respect, integrity, commitment, and innovation. ENTEK's commitment to non-stop innovation and attention to customer service keeps our customer's production lines humming. ENTEK is a dynamic and engaging place to work. We believe in supporting our employees, by offering paid time off, health insurance including medical, dental, and vision, 401k, and tuition reimbursement. Our teams are world-class! Stop by our website at ************* to learn more about our company and the opportunities that await you at ENTEK. Job Description Seeking a licensed, experienced Electrician to join the ENTEK family. This is a Monday through Friday day shift position. Qualifications General Journeyman Electrician license required. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to talk or hear. We are an Equal Opportunity Employer. M/F/Disabled/Veteran

> At Lakeside Foods and our family of companies, we're committed to providing wholesome foods to enrich people's lives through food. We are a culture that pursues our vision of growth and innovation with passion, confidence, and commitment. We are strongest together - valuing collaborative contribution, transparency and new ideas to enable change and growth. We are committed to an inclusive and respectful environment that promotes a healthy work-life balance, and there's a seat at the table for you. About the Role We are seeking an experienced Electrician Supervisor to lead our electrical department and oversee all phases of electrical power distribution on-site. This position plays a critical role in ensuring safe, efficient, and compliant electrical operations while supervising and mentoring a team of electricians. Key Responsibilities * Lay out electrical circuits to NEC specifications and interpret blueprints and job orders for the team. * Assign duties, schedule work, and monitor safe practices among employees. * Assist electricians with troubleshooting control circuits and complex electrical issues. * Design and adapt control and indication circuits for various equipment. * Order electrical supplies and inspect wiring and fixtures for compliance with company and local codes. * Maintain time and production records; estimate labor and material requirements. * Recommend improvements to production methods, equipment performance, and working conditions. * Motivate and train employees to achieve departmental goals. * Ensure compliance with plant safety, food safety, and Good Manufacturing Practices. Supervisory Responsibilities * Directly supervise 4-8 employees in the electrical department. Responsible for hiring, training, scheduling, performance evaluations, and disciplinary actions in accordance with company policies and applicable laws. Qualifications * Education: High School Diploma or GED required. * Experience: 8-10 years of related electrical experience, including supervisory responsibilities. * Licenses: State Electrical Supervisor's License. * Completion of a four-year Electrical Apprenticeship Program and successful passage of State Journeyman and Supervisor examinations. * Strong ability to read and interpret technical documents and apply advanced reasoning skills. * Proficiency in mathematical concepts including geometry, trigonometry, and statistical analysis. * Demonstrated leadership, training, and delegation skills. Why Join Us? This is an opportunity to lead a skilled team in a dynamic environment where safety, quality, and efficiency are top priorities. If you are a seasoned electrician with strong leadership skills, we invite you to apply. Where You'll Work: Milton-Freewater Located in northeastern Oregon (just 8 miles south of Walla Walla, Washington), Milton-Freewater is a community surrounded by orchards, wheat fields and vineyards set against the beautiful Blue Mountains (yes, they really are blue!) Long before the two towns of Milton and Freewater merged in 1950, settlers flocked to this area to take advantage of the fertile soil. Now situated within the acclaimed Walla Walla Valley Wine Appellation and the newly formed The Rocks District of Milton-Freewater sub-appellation, the area is still well known for its agricultural bounty. Lots of sun in the summer and mild winters contribute to an almost perfect climate. The area is also home to surprising natural beauty and outdoor recreation opportunities, a thriving and energetic arts and cultural community, a historic yet hip downtown filled with local boutiques, restaurants, tasting rooms, and specialty retail, and some of Washington's best golf. Lakeside Foods and our family of companies welcomes people of all backgrounds and the varied ideas they bring to the workplace. Being an equal opportunity and affirmative action employer is part of our heritage and culture. We recruit, hire and promote employees based on qualifications and merit, without regard to race, religion, age, gender, disability, marital or veteran status. Lakeside Foods participates in E-Verify. Equal Opportunity Employer, including Veterans and Individuals with Disabilities Nearest Major Market: Portland Oregon

Are you ready to take the next step in your electrical career? At Mittera, we don't just power machines, we power possibilities. We're looking for a skilled Electrician who thrives on solving complex problems, keeping operations running smoothly, and bringing innovation to life on the production floor. Why You'll Love Working Here $1,000 Sign-On Bonus! We value your expertise from day one. Earn $250 after your first month, another $250 after three months, and $500 after six months as a thank-you for joining our team and contributing to our success. Hands-On Impact: Work on a variety of established and evolving electrical systems, troubleshooting and upgrading legacy equipment to keep production strong and efficient. Growth-Focused Culture: We invest in our people, through training, development, and opportunities to advance your career in a company that's continually evolving. Essential Duties and Responsibilities * Maintain, service, troubleshoot, install, and repair electrical and electronic circuitry and related components associated with production equipment * Must have good knowledge in the electronic diagnostics of PLC's, AC/DC drive systems, various types of computer operated control circuitry and that includes working with voltages up to 480VAC * Utilize electrical ladder diagrams, electronic circuitry diagrams, and software programs to modify, repair, or improve equipment functionality * Use a variety of tools such as: hand/power tools, electrical/electronic test equipment and calibration equipment * Proficient in the repair of a wide variety of equipment * Work closely with managers, other technicians and peers to maintain electronic/electrical systems on new/specialized equipment * All other duties as assigned Requirements Skills and Abilities * High School Diploma or General Education Degree (GED) preferred * A State Electrical license, technical certificate or a minimum of 3-5 years of related experience and/or training or any equivalent combination of education and experience * Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions and decimals. * Demonstrated skills in leadership, organization and communication are necessary * Ability to anticipate problems and implement appropriate preventative measures * Ability to develop new techniques for work processes * Ability to redirect to issues as they emerge and reprioritize based on current business conditions * Must possess excellent communication skills and be able to multi-task * Be organized and able to plan, prioritize and follow through on projects assigned with minimal supervision * Ability to carry out the responsibilities in accordance with the organization's policies and procedures and OSHA laws Physical Requirements * Requires use of proper body mechanics with pushing, pulling, reaching, lifting, squatting, kneeling and bending * Pushing/pulling and lifting up to 50 lbs * Requires fine motor hand and arm movement, manual dexterity and coordination * Requires near visual acuity * Requires working around and operating departmental equipment * Must be able to access and navigate each department in the facility * Requires the ability to function in a professional manner under stressful circumstances Work Environment While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The employee is occasionally exposed to hazardous materials. A production employee regularly works near moving mechanical parts. Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: * Medical * Dental * Vision * Life and AD&D Policies * Short and Long-Term Disability * 401K with Company Match * Paid Time Off * Paid Volunteer Time Off Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!