Jobs in Ross Lake, MN

Lundberg Plumbing and Heating has been providing residential, commercial, and industrial plumbing, heating, and water services since 1981. The company has a reputation for quality service in Central Minnesota, with a focus on completing various mechanical projects of all sizes. Job Duties: Provide quality HVAC service repairs for residential and commercial customers. Install new HVAC equipment. Properly conduct operating tests on systems. Install ductwork for new systems as well as change outs from old equipment. Job Requirements: High School Diploma or GED Must possess a valid unrestricted Minnesota Driver's license. 2+ years of experience as an HVAC Installer and/or Service Technicians. Technical knowledge required to perform HVAC service calls. Knowledge of application Mechanical code. Work “on call” HVAC rotation. Must be able to lift and carry up to 50 pounds. Ability to have flexible work hours as the projects determine. Benefits Weekly auto deposited paychecks. Paid overtime after 40 hours worked each week. Health Insurance Life Insurance Short Term Disability Insurance HSA SIMPLE IRA Paid Holidays PTO Cell Phone Reimbursement

can be located in Hinckley or Malmo, MN. As a Construction Technician, you will support and assist the Construction department in maintaining, expanding, and upgrading Midco's regional network. This role involves interpreting network system maps, capturing design data, and performing installations and repairs on aerial and underground networks. Position leveling ranges from Construction Technician to Construction Technician III, based on experience and certifications. Responsibilities: * Interpret, comprehend, and utilize network system maps and plans. * Capture, store, and modify design data utilizing electronic devices such as GPS, smart phone, and laptops. * Install, maintain, and repair Midco's aerial and underground regional network. * Coordinate with utility companies and other entities for house moves and cable relocations, ensuring accurate billing and customer satisfaction. * Assist in preparing site surveys. * Locate existing underground cable. * Install drops, taps, amplifiers and power supplies. Splice coaxial cable. * Ground service drops and pre-wire new builds. * Read, comprehend, and utilize regional network maps and plans. * Possess knowledge in using signal meters, reading RF levels, voltage meters, TDR, etc. * Obtain certification and successfully operate a bucket truck to perform aerial construction and maintenance. * Must be able to perform key functions such as but not limited to, hanging a drop, performing drop cutovers and assisting technicians with an install. * Mentor new hires as required, providing guidance and support while demonstrating technical proficiency in several areas of the field. * Demonstrate knowledge of Midco's safety program by enforcing safety rules and procedures, wearing appropriate safety apparel (e.g., hard hats, safety vests, OSHA-approved boots), and operating all equipment safely. * Operate and drive a company vehicle in compliance with all Midco policies and procedures, ensuring safety, efficiency, and adherence to traffic laws. Maintain vehicle cleanliness and ensure regular maintenance and repairs are conducted as scheduled to uphold a professional image. * Model Midco's mission, vision, values, ethos, and Leadership Success Drivers, and inspire others to do the same. * Ensure customer privacy by adhering to Midco's privacy guidelines while actively following Midco policies and procedures. * Maintain reliable and predictable attendance as required by the position. * Perform other duties as assigned. Note: Management reserves the right to assign or reassign functions and responsibilities to this job description at any time. Required Qualifications: * High school diploma or equivalent (GED). * Complete Construction First Time Right (FTR) certification within 60 days of hire and consistently apply principles in all aspects of work. * Must possess and maintain a valid driver's license with a clean driving record and meet all applicable Department of Transportation (DOT) requirements for the state(s) in which the team member operates. This may include the ability to obtain and maintain a DOT Medical Card if required by law or company policy. A DUI conviction within the past 5 years will result in disqualification from employment in these positions. * Must develop working knowledge of construction, the National Electrical Code, OSHA regulations, state and local regulations and general safety standards. Preferred Qualifications: * Associate's degree or vocational training in a related field. * Prior experience in the telecommunications industry. The hiring range for this position is $22.00 - $27.00. This pay range is inclusive of multiple job levels. The actual base hourly pay offered to the most qualified individual will be determined based on multiple factors including the level of job offered, internal equity, location, and the individual's job-related knowledge, skills and experience. This position is hourly and may be eligible for additional compensation such as overtime and career progression pay increases. In addition to base pay, this position is eligible for an annual bonus plan based on company and/or individual performance. Note: Team Members will be assigned a level based on the required experience and training. Advancement is sequential and contingent upon successful completion of all requirements at the preceding level, including certifications, competency tests, and time-in-role or equivalent experience where applicable. Construction Tech * No previous experience required. Construction Tech I * Construction Tech requirements met or equivalent experience. * FTR 1 Certification and Field Competency 1 Tests. Construction Tech II * 2 years in role or equivalent experience. * FTR 2 Certification and Field Competency 2 Tests. * Basic Underground, Aerial, and MDU Construction Certifications. * Coax Splicing Certification. * Meter Reading, Damages, & Commercial Certification. Construction Tech III * 4 years in role or equivalent experience. * FTR 3 Certification and Field Competency 3 Tests. * Advanced Underground and Aerial Construction Certifications. * Utility Pole Analysis & Advanced Meter Reading Certification. Work Environment: * The noise level in the work environment is moderate to loud. * Frequent exposure to outside weather conditions. * Occasional exposure to moving mechanical parts, high, precarious places, risk of electrical shock, and risk of radiation and vibration. * May be required to work in excess of 40 hours per week and outside normal business hours, such as holidays, evenings, and weekends, as business demands. * Be willing to travel for business needs within the region, which could include overnight stays. Physical Demands: * Required to reach with hands and arms, stoop, kneel, or crouch. * Must occasionally lift and carry loads up to 80 lbs. and separately handle a 75 lbs. ladder. * Must be able to climb poles, ladders, bucket trucks, and other structures with proper fall protection equipment, adhering to the manufacturer's capacity for all equipment. * Must be able to work from elevated heights (bucket trucks, aerial lifts) and in tight spaces such as attics and crawlspaces. * Bucket trucks have a maximum load capacity ranging from 300 to 400 lbs. based on the manufacturer's specifications for each vehicle. Team members certified for bucket truck use are responsible for being aware of and adhering to these maximum load requirements. * Be able to safely use a ladder rated for a maximum load of 375 lbs., including the combined weight of the individual, fall protection equipment, and any tools being carried. Mental Demands: * Ability to adapt to changing circumstances and remain flexible in a dynamic work environment. * Ability to remain calm and effective under pressure, especially when dealing with urgent repairs or customer issues. * Keen attention to detail to ensure accuracy and quality in all aspects of operations.

Medical Solutions Direct Hire is seeking a Radiology Technologist for a job in Aitkin, Minnesota. Job Description & Requirements Specialty: Radiology Technologist Discipline: Allied Health Professional 40 hours per week Shift: 8 hours, nights Employment Type: Staff Medical Solutions Direct Hire Job ID #953498. About Medical Solutions Direct Hire At Medical Solutions, we're people who care, helping people who care. No matter how you look at it, there's a whole lot of care going on in our world and that's just the way we like it. What do we do? Medical Solutions is one of the nation's largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we're the very best at what we do. You'll love our culture that's filled with heart and soul. As a company and employer, we're sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you'll find a great place to work and a career home. We've received Best Places to Work awards, landed top industry awards, and received accolades for the impact we've made in business and within our community. But the only way to really get to know us, is to join us. We think you'll fit right in.

We are seeking to hire a friendly, energetic, and helpful person to fill a Cashier position. Duties include checking out customers, collection of money for purchases, operation of a cash register, assisting customers with every service the store offers, and thanking our customers for shopping with Super One Foods. If you enjoy working with people, this can be very rewarding work environment. Starting Wage - $14.25 and up Available Benefits, Subject to Eligibility -Flexible scheduling, Paid Time Off, Health Insurance, Retirement plans Requirements This position requires an employee to be able to stand at a cash register station for periods of time. Must be able to physically handle grocery items with typical weights of 2 lbs, and occasionally all the way up to 25 lbs. Work shifts may vary with flexibility in terms of scheduling. Advancement opportunities are available for employees that are successful as cashiers and demonstrate outstanding customer service skills. This position also offers the opportunity for many outstanding benefits including health insurance, pension, 401k, paid time off, along with other elective benefits. Part Time Customer Service Grocery Retail Sales

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Job Summary This position assists the Package Dispatch Supervisor (PDS) with dispatch analysis and daily routine tasks that support the dispatch and preload teams. He/She is responsible for analyzing dispatch plans, identifying areas of opportunity, report publication and service audits. Responsibilities: * Verifies system downloads. * Identifies various service failures and exceptions. * Prints and distributes multiple daily reports. * Makes necessary report updates and communicates changes to PDS. * Utilizes mapping tools. * Plots previous data and compares actual dispatch to planned dispatch. * Maintains a loop analysis to ensure periodic analysis of all loops. * Utilizes available reports and systems. * Completes monthly dispatch audit. Qualifications: * Bachelor's Degree or International equivalent - Preferred * Dispatch Planning System (DPS) and UDC knowledge * Experience using Microsoft Office products or equivalent software * Customer-focused with strong planning and organization skills * Familiar with package flow technologies - Preferred Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $25.70/hr to $41.80/hr. Pay is based on several factors including but not limited to, market location and may vary depending on job-related knowledge, skills, and education/training and a candidate's work experience. Hired applicants are offered annual short-term and/or long-term incentive compensation programs, subject to applicable eligibility requirements. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. The company offers the following benefits for this position, subject to applicable eligibility requirements. Medical/prescription drug coverage, Dental coverage, Vision coverage, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Basic and Supplemental Life Insurance & Accidental Death and Dismemberment, Disability Income Protection Plan, Employee Assistance Program, 401(k) retirement program, Vacation, Paid Holidays and Personal time, Paid Sick and Family and Medical Leave time as required by law, and Discounted Employee Stock Purchase Program.

Department: Health, Safety & Environmental Travel: Up to 25% **If you are a GPI employee, please click the Employee Login before applying. (********************************************************** **At Graphic Packaging International, we produce the paper cup that held your coffee this morning, the basket that transported those bottles of craft beer you enjoyed last weekend, and the microwave tray that heated your gourmet meal last night. We're one of the largest manufacturers of paperboard and paper-based packaging for some of the world's most recognized brands of food, beverage, foodservice, household, personal care and pet products. Headquartered in Atlanta, Georgia, we are collaborative, diverse, innovative individuals who create inspired packaging while giving back to our communities.** **With over 25,000 employees working in more than 130 locations worldwide, we strive to be environmentally responsible in our industry and in the communities where we operate. We are committed to workplace diversity and offer compensation and benefits programs that are among the industry's best to reward the talented people who make our company successful.** **If this sounds like something you would like to be a part of, we'd love to hear from you.** **A World of Difference. Made Possible.** The HSE Manager will be responsible for developing and implementing policies and practices to identify/mitigate hazardous conditions within the workplace. Identifying potential workplace hazards, unsafe equipment, work practices, and working conditions. Investigating accidents and liaising with engineers, management, and health and safety regulatory authorities to identify causes of accidents and prevent their recurrence. Providing advice and training on safety protocols and conducting audits to ensure compliance with organization and government standards related to employee health and safety. You will also be responsible for maintaining and analyzing records of workplace injuries, illness and absences to identify areas of concern and provide information required by regulatory agencies. **Key Responsibilities and Job Functions** : + Responsible for the monitoring and achievement of operational and/or financial results for their area of responsibility. + Responsible for people management actions such as hiring, terminating, rewarding, training, and developing employees. + Progression within the levels reflects increase in scope and responsibilities as well as growth in business and industry experience, process and people leadership capabilities, and broad technical expertise. + Manages experienced professionals and/or supervisors who exercise latitude and independence in their assignments. + First Friday managers meeting of the month, Supply MDC updates for the Safety Database and the Safety Conversations + Adapt departmental plans and priorities to meet short-term challenges. + Works on issues of diverse scope; analysis of situations or data requires evaluation of a variety of factors, including an understanding of concepts, theories, and principles in own discipline and a basic knowledge of other disciplines. + Solves problems following operational policies; understand the broader impact across the department. + Acts as advisor to subordinate(s) to meet schedules and/or resolve technical problems. + Applies understanding of the business and how area of responsibility integrates with other areas to achieve department objectives. + Interprets and administers policies, processes, and procedures that may affect sections and subordinate work units. + Develops and administers schedules, performance requirements; may have budget responsibilities. + Provides solutions to complex HSE and security issues serving as the HSE leader + Designs, develops, implements programs and oversees the aspects of the Packaging Machinery Division Manufacturing Facility's First Responders, OSHA Audiometric and Respirator fit testing, Process Safety Management, and industrial hygiene. + Investigates accidents, develops corrective and preventive actions, promotes HSE-conscious work performance. + Determines HSE training requirements and schedule and provides or coordinates training for employees applicable to their work processes. + Coordinates appropriate, timely and cost-effective delivery of health care related to disability, urgent and emergency care, work limitations, transitional return to work plans, accommodations and part-time work for workers compensation and non-workers compensation for illness and injury + Drives compliance maturity with environmental regulations such as Clean Air Act (including Title V Air Program), Clean Water Act (including NPDES and Storm Water Programs), RCRA, TSCA, SARA, etc. + Develop and provide training on key environmental issues, permitting and environmental requirements, and compliance. + Develop and implement environmental guidelines and best practices. + Manage regulatory reporting requirements, permitting processes, and response to regulatory activities, inspections, and citations. + Investigate environmental incidents and develop recommendations to prevent future incidents. + Maintain up-to-date, comprehensive knowledge of federal/state/local environmental laws, EPA regulations, and corporate policies. + Meet and maintain all divisional Quality Process Management objectives as established by GPI. + Serve as the facility contact for customer complaints and customer compliance audits. Maintain reporting systems for internal and external complaints within SAP in accordance with GPI requirements. + Communicate plant quality expectations and monitor performance relative to the objectives in a timely and effective manner. **Background:** + Bachelor's degree or related work experience required in lieu of degree. + 6 + years in HSE roles within manufacturing or industrial environments. + Experience with regulatory compliance and safety program implementation. + Exposure to cross-functional collaboration and HSE system implementation. + HSE Management software (e.g., Riskonnect, ISN) + Experience working with OSHA, EPA, state, and local HSE regulations; maintain records such as OSHA 300 logs, monthly environmental reports, and compliance calendars; and manage reporting tools like Riskonnect. **Preferred** + Certifications (preferred): NEBOSH, CIH, CSP, OSHA 30-hour, ISO 14001, or Certified Safety Professional credentials. + Paper manufacturing experience preferred. \#LI-DL1 **Pay Range:** **$94,875.00** - **$126,500.00** **Graphic Packaging is an Equal Opportunity Employer. All candidates will be evaluated on the basis of their qualifications for the job in question. We do not base our employment decision on an employee's or applicant's race, color, religion, age, gender or sex (including pregnancy), national origin, ancestry, marital status, sexual orientation, gender identity, genetic identity, genetic information, disability, veteran/military status or any other basis prohibited by local, state, or federal law.Click here to view the Poster, EEO is the Law. (****************************************************************************************************** ** ** **Nearest Major Market:** Brainerd

FULLTIME INTENSIVE IN HOME FAMILY SERVICES (I.I.F.S.) FOR HIGH-RISK YOUTH AND FAMILIES PROGRAM LICENSURE CANDIDATE, OR THERAPIST - CROW WING COUNTY *Licensure Candidate $73-75k (DOE) *Licensed Therapist $78k-$90k (DOE) PROFESSIONAL ACTIVITIES: Serving in a “Circle of Courage”© community with 4 core Values of Belonging, Mastery, Independence, and Generosity. The most important one is Belonging; where everyone feels that they are a significant part of their local team (they are listened to). Each staff attends one Belonging gathering (not a 'meeting meeting') per month, along with other meetings for case staffings and training. Reaching out with Intensive In-Home Family Services (2-3 times per week per case) and collaborating with community agencies with mental health services to children who are at-risk and their families. Your services will be primarily in families' homes, and at times in the community and schools. Connecting with other agencies (‘customers') who are working with the youth (to 'wrap' services around the child). Scheduling. Your service will focus on helping the family and child, often during non-traditional hours when your clients are available - after school hours and evenings (about 4 - some staff work on Saturdays to lessen evenings sessions by one or two evenings) to best connect with family work schedules. Available for crisis calls. Staff who enjoy these positions really value the flexibility in setting their own schedule. Documenting. Like all agencies, documenting of case notes and billable hours is required. Billing. Full-time staff provide 109 client hours per month out of the 173 working hours available in a month (40 hours x 4.3 actual weeks per month). The average client hours are 26-28 hours per week. QUALIFICATIONS: Licensure Candidate: Completed master's degree and working toward licensure (LICSW, LPCC, LMFT, or LP). We provide licensure supervision. Licensed Therapist: Fully Licensed Mental Health Professional (LICSW, LPCC, LMFT, or LP). EXPERIENCE: Demonstrated ability to work with children and families experiencing mental health issues in a direct care role. Familiar with a variety of counseling techniques with theories to aid in the care and treatment of individuals with mental health needs such as behavior modifications for children, child development education, communication, decision-making skills, anger management, social skills, leisure, self-esteem and basic daily living skills for the family. BENEFITS: Health Insurance- very good coverage "NICE Healthcare - provides you with direct in home or virtual medical visits to you along with 550+ prescriptions absolutely FREE. Staff love this extra addition to their health insurance program. Available to all staff whether they use GMFS's health insurance or not. Paid Time Leave which includes ‘Earned Sick and Safe Time' 403b Retirement Plan with one-to-one match after one year Wellness Program to reduce health insurance costs Generous Employee Assistance Program Paid Parental Leave Clinical Supervision to become a Licensed Therapist (LICSW, LMFT, LPCC) with a board-certified clinical supervisor. Public Service Loan Forgiveness in working with a Nonprofit organization. Self-Income Based Forgiveness Programs are available for Bachelor level and Master level graduates in working with a Nonprofit organization. Life Insurance Short Term Disability Long Term Disability Vision Insurance Dental Insurance GMFS is an Equal Opportunity Employer.

Camp Knutson is a supportive, medically-sound camp for individuals with disabilities, medical conditions and other identified needs. We partner with other organizations to host camps for youth and adults with identified needs such as autism, heart disease, skin conditions, Down syndrome, burn survivors and youth experiencing homelessness. Our beautiful, updated 30-acre campus is nestled between the pristine waters of Lower Whitefish and Big Trout lakes. Open year-round, our modern facilities and beautiful north-woods setting make us the perfect location for retreats, conferences, social gatherings, meetings or training events September through May. Camp Knutson is a service of Lutheran Social Service MN (LSS). Position pays $15/hr-17/hr, depending on qualifications. As a Kitchen Assistant, you will be responsible for assisting in the preparation of food and other aspects of kitchen/dining operations that lead to an excellent food service experience for all campers, staff, volunteers, and other visitors to enjoy. at Camp Knutson. This includes: Food preparation including but not limited to prepare, pan and cook food as directed, set up salad bar, and restocking supplies. Assist with dietary needs of guests with special diets. Clean up following meal will include properly storing and labeling all food. Cleaning dishes and kitchen includes but not limited to cleaning flat surfaces after every meal, pots, pans and food dishes, removal of garbage and sweep and mop the floors. Minimum Requirements: Ability to relate to youth and adults in a positive manner Understand and utilize Food Safety skills Be able to mark / label foods properly Ability to follow basic recipes, use measurement tools when appropriate Utilize good problem solving and customer service skills Demonstrate knowledge and skill in assigned job duties under training, guidance, supervision of Food Service Managers LSS is a dynamic social service organization serving children, youth and families, people with disabilities, older adults and military veterans. Trustworthiness is a value and strength shared by our employees and recognized by the communities we serve. We offer an ALIVE Workplace (Supportive, Positive and Fun) and careers that challenge, energize and rewards employees. Consider joining us!

We are seeking a knowledgeable CNC Programmer to join our team at Elemet Manufacturing. The CNC Programmer is responsible for developing efficient and precise machining programs that produce high-quality parts in minimal time and at optimal cost. This position requires strong expertise in MasterCam (2020 or newer), including advanced multi-axis (3-, 4-, and 5-axis) programming for vertical and horizontal CNC machining centers, as well as limited 5-axis waterjet programming. The ideal candidate will have hands-on experience, strong analytical skills, and a deep understanding of machining processes, tooling, and fixture design. Key Responsibilities • Develop clean, efficient, and well-documented G-code machining programs using MasterCam 2020 or newer, applying in-depth knowledge and experience with complex multi-axis programming. • Interpret and analyze blueprints, electronic models, and specifications to determine machining strategy and sequence. • Plan, select, and optimize tools, feeds, speeds, and cutting parameters to achieve high-quality results at the lowest possible cost. • Design machining fixtures and holding solutions in SolidWorks to ensure part accuracy, repeatability, and safe operation. • Design press brake tooling in SolidWorks for the forming of parts, ensuring ease of use and operator safety. • Create detailed setup sheets and tool lists to support efficient machine setup and operation. • Verify toolpaths and machining simulations to confirm accuracy and prevent errors before production. • Collaborate with Program Managers and Manufacturing Engineers on tool selection, machining methods, and process improvements. • Maintain organized program files, documentation, and revision histories in accordance with company procedures. • Perform other related duties as assigned to support production and engineering operations. Qualifications • Proficient in reading and interpreting technical drawings and specifications with a solid understanding of GD&T. • Minimum of 5 years' hands-on experience in a machine shop environment. • At least 3 years of CNC programming experience with large precision parts and tooling for construction equipment or similar advanced industries. • Expert-level proficiency in MasterCam 2020 or newer, including complex multi-axis programming and post-processing. • Proficient in SolidWorks for fixture and tooling design. Skills and Competencies • Strong knowledge of machining principles, shop math, and measuring techniques. • High school diploma or equivalent required; additional education or certifications in CNC programming, machining, or related fields preferred. • Proficient in Microsoft Excel and Word. • Excellent communication skills and ability to collaborate effectively across departments. • Strong problem-solving skills and ability to think creatively in manufacturing process design and troubleshooting. Physical Requirements • Ability to lift 40 lbs. on a consistent basis • Ability to stand for up to 10 hours • Excellent hand/eye coordination • Demonstrated ability to effectively use power tools • Good manual dexterity, coordination, and stamina • Consistently wear personal protective equipment • Ability to work in production facility with fluctuating temperatures and humidity levels Featured Benefits • Medical Insurance with HSA • Dental Insurance • Vision Insurance • Life Insurance • Accident & Critical Illness Insurance • 401(k) Contributions • Tuition Reimbursement • Profit Sharing • Paid Time Off (PTO) • Volunteer PTO • 9 Paid Holidays • Paid Uniforms • Boot Reimbursement Job Details Job Title: CNC Programmer Company: Elemet Manufacturing Location: Aitkin, MN Shift: 1st Reports To: Production Supervisor Direct Reports: No Pay Type: Hourly Job Type: Indirect Requisition ID: 55322 The expected base pay range for this position is between $30 and $36 per hour. The actual base pay offered may vary depending on multiple individualized factors, including geographical location, education, job-related knowledge, skills, and experience. Who We Are Elemet Group provides solutions to solve our customers' manufacturing and fabrication challenges. Across our four separate locations, we have access to state-of-the-art equipment and highly skilled specialists in CNC metal spinning, robotic welding, automated machining, assembly, powder coating, e-coating, and 2-axis and 5-axis water jet cutting and provide our customers with vertically integrated solutions. Our core values of Teamwork, Integrity, Driven, Innovation, and Fun guide our daily business decisions, foster a strong sense of community, and reinforce our commitment to a positive workplace culture. Elemet Group participates in E-Verify, a federal program that checks the employment eligibility of all new hires. Elemet Group is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We are seeking a motivated and detail-oriented Preconstruction Estimator to join our estimating team, focusing on water and wastewater treatment plant (WTP/WWTP) projects. This role supports collaborative delivery methods-such as Construction Manager at Risk (CMAR), Design-Build (DB), and Progressive Design-Build (PDB)-where early contractor involvement and teamwork with design partners and owners are key to success. The ideal candidate brings a strong technical foundation in civil or process mechanical construction, analytical problem-solving skills, and a collaborative mindset. You'll play a key role in developing accurate estimates, evaluating design alternatives, and shaping projects that improve water infrastructure across our communities. Key Responsibilities Prepare conceptual and detailed cost estimates at various design stages (10%, 30%, 60%, 90%). Perform quantity takeoffs for civil, structural, mechanical, and process disciplines. Solicit, analyze, and scope subcontractor and vendor proposals to ensure accuracy and coverage. Collaborate with design partners to align design development with cost and constructability considerations. Support the development of pricing models, cost summaries, and GMP or target price proposals. Participate in design and value engineering sessions, providing cost-driven feedback. Assist with client presentations and internal preconstruction deliverables. Qualifications Bachelor's degree in Construction Management, Civil/Environmental Engineering, or related field (or equivalent experience). 3-8 years of estimating or project management experience, preferably in water/wastewater treatment. Experience in collaborative delivery projects (CMAR, DB, or PDB) strongly preferred. Proficiency with estimating tools such as InEight; strong Excel and quantity takeoff skills. Familiarity with Bluebeam, Revit, or Navisworks a plus. Understanding of treatment process systems, mechanical/electrical components, and construction sequencing. Preferred Attributes Collaborative and team-oriented approach to problem-solving. Strong communication and organizational skills. Detail-driven with the ability to manage multiple priorities in a fast-paced environment. Eagerness to learn and grow in preconstruction for complex water infrastructure projects. Why Join Us? Join a collaborative and purpose-driven team delivering essential water and wastewater projects. We offer competitive pay, professional development opportunities, and a culture that values innovation, integrity, and teamwork.

We are seeking to hire a friendly, energetic, and helpful person as a Bagger/Utility. This position helps complete our customers shopping experience by providing full service while bagging their grocery purchases. A successful candidate will enjoy greeting customers and work quickly and accurately. This position is an entry-level position. Successful employees are promoted from this pool for advancement regularly. Starting Wage - $12.00 Available Benefits, Subject to Eligibility -Flexible scheduling, Paid Time Off, Health Insurance, Retirement plans This position requires a person to be able to move while standing or walking and use hands and arms constantly. Must be able to lift 20 lbs. regularly and up to 50 lbs. occasionally. Must assist customers with carry out of groceries upon request. Shifts may vary but are mostly evenings, weekends and holiday weeks. Part Time Customer Service Grocery Retail

Reporter PT This position will report on a wide variety of stories and newsworthy events in the community. The ideal candidate will be versatile, self-motivated and will exhibit a passion for high-quality journalism. Essential Responsibilities: Receives assignment or evaluates news leads and news tips to develop story idea. Assists with print page layout using InDesign, and online posting. Gathers and verifies factual information regarding story through interview, observation and research. Investigates breaking news developments. Organizes material, determines slant or emphasis, and writes story according to prescribed editorial style and format standards. Discuss issues with editors in order to establish priorities and positions. Research and analyze background information related to stories in order to be able to provide complete and accurate information. Review copy and correct errors in content, grammar, and punctuation. Assists with special section stories and layout. Authority and Relationships: Regularly communicates with people outside the organization, representing Adams Multi Media to customers, the public, government and other external sources. This position requires a high level of integrity and tact as a representative of Adams Publishing Group. Qualifications: Education & Experience Bachelor's degree in Journalism, Communications, English or related field. Minimum 2 years of experience as a reporter; or equivalent combination of education and experience. Skills & Abilities Communicates effectively in writing as appropriate for the needs of the audience. Knowledge of Associated Press style. Actively listens, giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate. Ability to work independently as well as a collaborative team member. Ability to organize, manage multiple projects and meet deadlines under pressure. Strong understanding of multimedia technology. Must meet Adams Publishing Group driver qualifications. Schedule: Non-exempt, full-time Benefits: Competitive medical, dental and vision insurance; company-paid disability and term life insurance; a generous PTO policy with PTO accrual beginning on the first day of employment; company-paid holidays; and a 401(k) plan with discretionary matching. In addition, AMM associates have access to discounts on a wide variety of products, services, flights, rental vehicles and more. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

1. Enter work place at scheduled time in uniform ready to begin work. Properly clock in. 2. Ensure prescribed amount of cash is on hand by counting and recording count. 3. Ensure telephone service meets company standards. Telephone answered within three rings, using proper script. Transfer calls properly, perform wake up calls, take message politely and never give out a room number. 4. Properly check in and out guests. 5. Properly handle reservations. 6. Ensure property management computer procedures are correctly implemented. 7. Properly answer guests questions for directions or other needs. 8. Assist with laundry needing completion. Fold linen, dry linen and wash linen as needed. 9. Assist with cleanliness of lobby, corridors and elevator. 10. Additional duties may be added as needed.

Director of Rehabilitation / DOR - CCRCPT / PTA / OTR / COTA / SLP Continuing Care Retirement Community (CCRC) - a diverse setting with a wide range of treatment opportunities throughout the continuum of care. Job Type: Full-time Schedule: Flexible Schedule, 40 hours per week Location: Heartwood Care Center - Crosby, MNPay: $65,000 to $100,000 per year Setting: Rehabilitation Center, Continuing Care Retirement Community (CCRC) Diverse CCRC Setting: Skilled Nursing, Assisted Living, Independent Living, Memory Care, On-campus Home Health, Outpatient Aegis Therapies, one of the nation's leading providers of rehabilitation and wellness services, is hiring a Director of Rehabilitation to join our supportive team and reap the benefits of some of the best career advantages in the industry. As a Director of Rehab for CCRC you will be responsible for: Overall clinical quality, integrity, service excellence, financial and operational viability of rehabilitation program Ensure client and company expectations are met Plan, develop, implement, and monitor appropriate provision, documentation, billing of clinical services and customer relations. Identify and implement growth opportunities across the CCRC community and evaluate effectiveness of employees and ongoing programs. Why Aegis Therapies: Career Growth & Development: We invest in your future with specialized, ongoing training, career advancement opportunities and the strongest clinical support in the industry. Flexibility - Redefining Work-life Balance: We offer you the opportunity to maintain flexibility and a healthy work-life balance, so you never have to choose between your career and the things that make life worth living. Impactful Work: Make a meaningful difference in the lives of our patients. Supportive Environment: Collaborate with teams that value your expertise and dedication. Benefits: Support, local clinical mentorship, clinical education and unlimited CEUs Create your own career path: clinically, management, etc. Flexible schedule, paid time off, plus one paid CEU day Licensure and professional membership reimbursement Interdisciplinary collaboration for providing the best patient care Medical, dental, vision within 30 days or less Salaried Position National opportunity to transfer while maintaining employment status Multiple settings nationwide: CCRC, SNF, Assisted Living, Outpatient Clinics, Home Health And much more As a Director of Rehabilitation, you'll step into a healthcare management leadership role that goes beyond just being in charge - it's about inspiring others and making a meaningful impact. With the stability of strong corporate support and the autonomy to shape your therapy department, you'll have the opportunity to lead your team to success! Qualifications: Possess and maintain a current license in the state of practice; Physical Therapy / Physical Therapy Assistant, Occupational Therapy / Occupational Therapy Assistant, or Speech-Language Pathology program. Minimum 1 year of experience as a treating therapist or therapy assistant; minimum 3 years of experience preferred. Minimum 1 year of therapy management experience. Currently Credentialed Documentation Auditor (CDA) or ability to become credentialed within six (6) months. We're committed to fostering a supportive work environment where you can thrive both personally and professionally. Take the next step in your career journey with us and experience the fulfillment of leading a team to success as a Director of Rehabilitation. We would like to discuss what is most important to you. Let us help find the career of your dreams! Apply Today. EEO Statement: Aegis Therapies and its Family of Companies is committed to a diverse workforce and is an Equal Opportunity Employer. For detailed information on your rights, Click Here OR ***************************************************************************************

Part-time Description Breezy Point is looking for some part time Bussers to support our Food & Beverage departments. If you enjoy working in the hospitality industry, we would like to meet you. Bussers help clear away tables and reset the tables for guests. Flexible schedules. We offer great resort discounts!! We are an Equal Employment Opportunity Employer. Requirements Duties & Responsibilities: Prepare dining areas before guests are seated Serve water and clean off tables Remove dirty utensils and replenish if needed Clean and reset the table after guests leave Help maintain health and safety regulations in kitchen and dining areas Must be willing to work nights, weekends and holidays

Full-time Description Operates CNC machines including vertical mills, horizontal mills and lathes to perform one or more machine functions on metal or plastic work pieces. Produces precision parts applying knowledge of machining procedures to meet the Customer's expectations and Pequot Tool's Quality procedures and standards. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) Performs work on site; meeting Company's Attendance Policy. Measure dimensions of finished work pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures. Remove and replace dull cutting tools. Mount, install, align, and secure tools, attachments, fixtures, and work pieces on machines, using hand tools and precision measuring instruments. Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems. Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Lift work pieces to machines manually or with hoists or cranes. Modify cutting programs to account for problems encountered during operation and save modified programs. Calculate machine speed and feed ratios and the size and position of cuts. Insert control instructions into machine control units to start operation. Understand operation sequences & dimensions of finished work piece. Verifies alignment using measurement instructions. Perform machine set-ups using knowledge of job requirements and materials used to enter control panel settings for tool travel, axis movement and tool speeds. Perform programming operations. Work with minimal supervision and consistently produces repeat parts and new first run parts, accurately within specifications. Independently handle, lift, move new raw materials, tools, and fixtures in accordance with the physical requirements as stated in this . Requirements POSITION QUALIFICATIONS Competency Statement(s) Attendance Management - Meets company standards in attendance and punctuality. Attends work consistently and on time. Communication Skills, Oral & Written - Ability to communicate effectively with others using the spoken word. Ability to communicate clearly and concisely in written form. Initiative - Ability to make decisions or take actions to solve a problem or reach a goal. Teamwork - Ability to work effectively in a Team environment; contributing equally to both team and individual success. Problem Solving - Ability to find a solution for or to deal proactively with work-related problems. Technical Aptitude - Ability to comprehend complex technical topics and specialized information. Mathematical Skills - Ability to add, subtract, multiply and divide in all units of measure. Ability to calculate basic geometric and trig mathematic functions. Accuracy - Ability to perform work accurately and thoroughly. Quantity & Quality - Meets productivity standards, achieves established goals by completing work in a timely manner while striving to increase productivity. Works quickly while demonstrating accuracy & thoroughness. Displays a commitment to excellence and can monitor own work. Applies feedback to improve performance and looks for ways to improve and promote quality. Safety Awareness - Ability to identify and correct conditions that affect employee safety. SKILLS & ABILITIES Education: High School Graduate or GED for entry level; trade school (or equivalent work experience) with two to four years related work experience. Experience: Entry level requires the ability to meet job task requirements with the first year along with on-the-job training. More advanced skill levels generally require specific related work experience with precision part production in a job shop environment to be successful. Computer Skills Ability to use company's business computer system to accurately record work time and tasks performed on job operations. Requires the ability to navigate computer system to retrieve work instructions and communicate with others. Certificates & Licenses Machine Tool Technology certificate or equivalent work experience is preferred. Other Requirements Technology used in this occupation includes precision measuring equipment including calipers, gages, inspection fixtures, CMM, VMM; and software such as CAD/CAM software, CNC machine tool programming software. PHYSICAL DEMANDS Physical Demands Lift/Carry Stand C (Constantly) Walk F (Frequently) Sit O (Occasionally) Handling / Fingering C (Constantly) Reach Outward C (Constantly) Reach Above Shoulder C (Constantly) Climb N (Not Applicable) Crawl N (Not Applicable) Squat or Kneel F (Frequently) Bend or Twist F (Frequently) 10 lbs or less C (Constantly) 11-20 lbs C (Constantly) 21-50 lbs O (Occasionally) 51-100 lbs N (Not Applicable) Over 100 lbs N (Not Applicable) Push/Pull 12 lbs or less C (Constantly) 13-25 lbs F (Frequently) 26-40 lbs O (Occasionally) 41-100 lbs N (Not Applicable) N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements Vision (Near, Distance, Color, Peripheral, Depth Perception) Sense of Sound (Ability to hear machine operation) Sense of Touch Ability to wear Personal Protective Equipment (PPE) (Protective footwear/steel toe & safety eyewear when in the manufacturing areas.) WORK ENVIRONMENT Modern precision manufacturing job shop. The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. Equal Opportunity Employer. Pequot Manufacturing is a drug free workplace and all offers of employment are contingent upon passing a negative drug test. We manufacture firearm components, along with many other components for a variety of industries. As a manufacturer of firearm components, we are under ATF regulations that prevent “Prohibited Persons” from access to these components. A prior felony conviction that has not been set-aside or expunged or otherwise meeting the definition of a prohibited person, will be ineligible for an offer of employment. Salary Description $20-$32

The Director of Spa & Wellness is a visionary leader responsible for the overall strategic direction, operational excellence, and financial performance of Grand View Lodge's world-class spa facility. This individual will curate an unparalleled guest experience, ensuring every touch-point reflects the resort's commitment to luxury, wellness, and personalized service. The Director will lead a dedicated team of spa professionals, foster a culture of continuous improvement, and drive innovation to maintain the spa's reputation as a premier destination for holistic well-being.

Crosby-Ironton School District has openings for paraprofessional substitutes at the high school and elementary school. The sub position is very flexible and applicants can decide which days fit into their schedule Monday through Friday. A typical full day is from 8:00 a.m. to 3:30 p.m. No experience is necessary as well will provide the necessary training. To apply, please stop in the District Office, located at the secondary campus at 711 Poplar Street, Crosby. We will provide you with the necessary paperwork to complete. All applicants must complete a criminal history background check, which is a $15 fee.

Does this position interest you? You should apply - even if you don't match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview At the front line of the Safelite experience, the Auto Glass Technician is an entrepreneurial, hands-on professional that leverages their Safelite training, industry-leading tools andtechnology to complete repairs, replacements and recalibrations in the shop and on the go with our Mobile Glass Shop offerings. What you will do • Provide all vehicle glass repair and replacement services at a Safelite Shop or Mobile Glass Shop in the most efficient manner, focusing on safety, quality and exceptional customer service. Clean customer vehicles after every job. • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing. • Proficiently operate Safelite's tools and technologies, including: True Seal , Ezi-Wire™, Glass Table System (GTS), chemicals (as required by the “Safelite Way of Fitting”, work order and customer administration systems, and Safelite's handheld Mobile Resource Management (MRM) technology. • Safely operate company and customer vehicles throughout the workday. • Communicate with all scheduled customers in-person, via text, and on the phone; present, promote and sell Safelite promotional items and services to customers. • Performs other duties as assigned • Complies with all policies and standards What you'll get: • Competitive weekly pay starting at $20.25/hour, increasing to $24.00/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required • Safelite SafeTech™ certification Required Experience Qualifications • Must be 18 years of age or older. Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company uniform and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures) This position involves driving duties that will be monitored through the use of cameras, GPS, and other tracking technologies to ensure safety and compliance. #LI-KS1 This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.