Maintenance Technician jobs at Ryerson - 8583 jobs

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Minimum Requirements: The candidate will have at least two years of industrial or service experience, ideally in a maintenance-related field, with an emphasis on safety. The candidate must also be able to communicate effectively and professionally via email and technical reports using proper grammar, spelling, and syntax. High school diploma or equivalent is also required. We are willing to train a motivated candidate with the right attitude and aptitude. A personable demeanor is required. Desired Attributes: An understanding of motors, pumps, fans, and bearings is desirable (general mechanical aptitude). At least 2-4 years of vibration testing and analysis is desired with ISO certification and Emerson/CSI test equipment (2130/2140) experience a plus. Compensation is commensurate with experience. Duties: Primary: Collect & analyze vibration data on a variety of industrial equipment (motors, fans, pumps, gearboxes, etc.) Understand spectral and time-waveform components for identifying faults Perform bump tests to determine natural frequencies Perform cross-phase analysis to determine comparative motion and differentiate similar faults Perform infrared thermography surveys on low and medium voltage electrical systems. OJT is available. Collect oil samples on a variety of industrial equipment (hydraulic systems, bearing housings, gearboxes, etc.) Collect deenergized electrical test data on low and medium voltage motor starter circuits (resistance to ground, resistance phase to phase, inductance phase to phase, capacitance to ground). OJT is available. Perform analysis and technical reporting on the above, meeting time requirements imposed both internally and by the customer Schedule service calls with customers and maintain a calendar Safeguard and maintain all company equipment Physical Requirements: Be able to climb permanent ladders (up to 40 vertical feet), crawl, stretch, kneel, stand and walk for extended periods, at least 8 hours Be able to walk up/down stairs equivalent to 50-100 vertical feet. Lift and carry up to 50 pounds Work wearing a dust mask or respirator Work for 1-2 hours while wearing acid PPE, including raincoats or plastic suits with face shields. Be able to travel by airplane and/or drive to customer job sites (some drives between 4-8 hours depending on candidate & customer proximity) Be able to spend multiple nights out of town (overnight travel typically 35-45% after initial training period of 6 months, up to 75% during training period) Be able to work in a variety of environmental conditions (>90F, Administrative Requirements: Basic computer skills (MS Word, MS Excel, MS Outlook, Adobe Acrobat) Good to excellent writing skills, grammar. Planning and scheduling time, including meeting deadlines Submitting expense reports and timesheets Benefits: Typical and competitive. Also includes company laptop, mobile phone, credit card, and service vehicle If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employees job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employees job specialty. Maintains in-depth technical knowledge of numerous systems as the employees job specialty requires. Performs research and procedures as the employees job specialty requires. Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. Independently performs maintenance as per industry standards. Complies with 5S and housekeeping standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. Updates records and reviews CMMS history and analyzes data. Provides technical contents of sales quotations and performs T&M duties as required. Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. Completes and conducts on-the-job training and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. Must be able to use hand tools and specialized tools as appropriate. May be required to travel. Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $102,970$131,689.52 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. Independently performs maintenance as per industry standards. Works with Planner Scheduler to optimize preventative maintenance procedures. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. Updates records and reviews CMMS history and analyzes data. Completes and conducts on-the-job training and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: Knowledge and experience of Boiler System, Ammonia and Freon Chillers, Air Compressors, Glycol and AHU cooling systems, Fire protection system, Air Handling system and Waste Water system. Perform mechanical, plumbing, piping, and basic electrical repairs Maintain accurate maintenance logs and documentation within the CMMS Conduct routine preventive maintenance, including filter changes, belt inspections, lubrication, and system performance tuning. Support operation and repair of wastewater treatment equipment and maintain potable water systems, pumps, chemical feed systems, valves, and associated piping. Perform scheduled inspections, diagnostics, and repairs on steam and hot-water boilers. Troubleshoot system pressures, oil levels, electrical controls, and moisture problems. Must be able to use basic hand tools and specialized tools as appropriate. Support emergency repair needs and participate in an on-call rotation as required. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $36.78$47.03 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Paragon Medical, a business of AMETEK, is a trusted partner in medical device manufacturing. We offer end-to-end solutions from concept to final production. With expertise across various applications, we deliver high-precision components and complete products tailored to exceed customer expectations. Duties and Responsibilities: Under minimal supervision, installs, repairs, and maintains the following machine manuals, prints, or by referral to building codes: Physical structures. Electrical wiring. Plumbing and fixtures. HVAC Includes motor and engine, CNC, electrical, pneumatic, and PLC. Fanuc, Mitsubishi, and Haas controls preferred. Assists higher-level maintenance. Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury. Responsible for facility and ground maintenance. Expected to be on call. Occasional travel may be necessary. Occasional use of personal vehicle may be needed for pickup/delivery of machine parts. Other maintenance and facilities duties as assigned. Once an employee demonstrates competency in a position, he/she may be required to train others in similar roles. MaintainX system experience a plus The ideal candidate will be a proficient problem solver independently or with a team. Work Environment: Work performed in a Plant environment. Exposure to odor, noise, dust, heat, cold, chemicals, and other elements. The noise level in the work environment is usually moderate Education and Experience: * Minimum High School or GED. Trade school or professional training preferred. * 3 - 6 years of experience Compensation Employee Type: Hourly Salary Minimum: $60,000 Salary Maximum: $85,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Dayton

Perform the required Maintenance activities and tasks to keep equipment safe, functional, and efficient by executing preventive, predictive, and corrective maintenance actions. Learn and demonstrate competency at maintaining and troubleshooting proce Maintenance Technician, Technician, Maintenance, Manufacturing, Property Management, Equipment

Betts Company is seeking an experienced Maintenance Technician III to join our team in Fresno, CA. This senior-level role is responsible for diagnosing complex equipment issues, performing advanced repairs, and leading key maintenance initiatives. The ideal candidate will possess expert-level skills in mechanical, electrical, and automated systems, and play a vital role in training and mentoring junior technicians. Why Join Betts? Paid vacation 8 paid holidays Annual performance-based salary increases Excellent health, dental, and vision coverage 401(k) with company contribution Yearly boot allowance Company-sponsored life insurance Positive work culture and a legacy of over 150 years Career growth opportunities and strong company values known as The Betts Way Key Responsibilities Diagnose and repair advanced mechanical, electrical, pneumatic, and hydraulic systems. Lead and manage maintenance projects, including upgrades and process improvements. Troubleshoot and program PLCs, VFDs, servo drives, and control systems. Conduct advanced welding, machining, and fabrication tasks. Perform preventative maintenance and ensure accurate documentation. Train, mentor, and support development of junior maintenance staff. Collaborate with leadership and cross-functional teams to support operational goals. Ensure all work complies with company safety policies and OSHA standards. Requirements Education & Experience High school diploma or GED required; technical training preferred. Minimum 3-5 years of experience in industrial maintenance. Forklift certification required. Knowledge & Skills Expert troubleshooting skills for PLCs, VFDs, CNC machinery, and industrial automation. Strong understanding of pneumatics, hydraulics, and electrical schematics. Leadership skills with experience training or mentoring others. Ability to work independently and handle multiple priorities effectively. Commitment to safety and regulatory compliance. Tools & Equipment Used Lifting/Rigging: Boom lifts, scissor lifts, forklifts, ladders, hoists Machining/Fabrication: Lathe, mill, drill press, sheet metal shear, presses Welding/Cutting: Plasma cutter, torch, MIG/TIG/ARC welders, soldering iron Finishing Tools: Grinders, sanders Electrical/Mechanical: Multi-meters, hydraulic controls, power and hand tools Industrial Systems: Furnaces, air compressors, burners, plumbing, pneumatics Physical Requirements Lift/move up to 50 lbs and work in confined spaces Stand, bend, stoop, climb for extended periods Willingness to work flexible hours, including overtime if needed EEO Statement Betts Company is proud to be an Equal Opportunity Employer. We value diversity and are committed to fostering an inclusive environment for all employees. Employment is contingent on successful completion of a physical and drug screening. Salary Description $36.00 an hour

Within our Tracy, CA manufacturing facility, we are seeking a highly qualified Maintenance Controls/PLC System Supervisor on our Plant technical team to continue moving our organization to even larger levels of maintenance, controls optimization, and production efficiencies. We take pride in our vision to be "world's best", it's why we work harder, invest more, and continually innovate. At Leprino Foods, starting compensation for this role typically ranges between $100,000-$120,000. This position has an annual target bonus of 10%. Responsibilities: The Industrial/Maintenance Controls System Supervisor provides guidance and direction to a team of employees in the Maintenance Controls department. Makes strategic and sound decisions pertaining to industrial controls, department safety, and department efficiency for team. Monitors controls systems of the plant related to production processes and overall plant facilities, and develops plans to provide preventative modifications to maximize equipment uptime, plant efficiencies, product quality, safety, and cost control. Builds an effective employee team by engaging, mentoring, and developing direct reports. Plans and schedules daily staffing needs to maximize labor efficiency and ensure maintenance controls needs are met. Leads and coaches team employees by implementing programs in technical training, safety, quality, communications, performance recognition and internal employee development to drive peak employee engagement and productivity. Builds and fosters strong working relationships, collaboration within their team, and a positive work environment. Engages, mentors, and develops direct reports. Supervises the daily shift activities to minimize production downtime related to controls systems, work orders, and planned controls upgrades or modifications. Prioritizes controls programming needs to minimize production downtime, while assuring safety and quality. Must be knowledgeable of all plant processes and the equipment involved in order to best trouble-shoot and solve maintenance problems, primarily in the controls / PLC area. Provide guidance and direction to a team of employees in the Maintenance Controls department. Make strategic and sound decisions pertaining to industrial controls, department safety, and department efficiency for team. Monitor controls systems of the plant related to production processes, overall plant facilities and develops plans to provide preventative modifications to maximize equipment uptime, plant efficiencies, product quality, safety, and cost control. Assist with achieving departmental objectives and company goals in relation Controls department. Perform preventative maintenance on the defined devices/equipment with the intent to optimize equipment reliability. Lead troubleshooting of production problems on a timely basis until successful resolution, including major and minor maintenance of automated and non-automated equipment. Monitor and replace automation hardware devices and electrical equipment as needed. Manage, develop, and execute training to all levels of employees. Support a continuous 24/7 manufacturing operation. You Have at Least (Required Qualifications): Associates Degree in Controls Engineering, Industrial Technology, or a similar maintenance subject area. Five years of industrial controls experience although applicable education may substitute experience. Familiarity with SAP, Maximo, or other manufacturing computer systems. We Hope You Also Have (Preferred Qualifications): Experience reading & understanding Allen Bradley/Wonderware, ladder logic and P&ID loops. Experience in PLC/SLC development and programming. Dairy/Cheese manufacturing experience. People leadership experience in manufacturing environment. Leprino Foods celebrates and supports diversity. We believe in equal opportunity and do not discriminate on the basis of race, religion, ethnicity, national origin, gender, sexual orientation, age, marital status, veteran status, or disability. We know we are better together and are committed to creating an inclusive and supportive culture that uses the unique talents, experiences, background, and perspectives of each individual employee. Offering You In Return: A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries and bonuses, life, medical/dental/vision coverage, voluntary benefits, employee assistance programs, wellness incentives, tuition assistance, vacation, ten paid holidays, sick time, paid parental leave, annual merit increases, as well as the LFC Profit-Sharing & 401(k) plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. The Easy Apply option through LinkedIn is not considered an official application with Leprino Foods. If you would like to formally apply for this open position, please visit careers.leprino.com.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $21.42$27.38 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

We are seeking a Mechanical Maintenance Engineer to support and improve the reliability, safety, and performance of mechanical systems across our facility. This role bridges engineering and maintenance, focusing on equipment reliability, preventive maintenance strategies, troubleshooting, and continuous improvement initiatives. The ideal candidate is equally comfortable on the plant floor and working with data, drawings, and maintenance systems. Key Responsibilities Provide technical support for mechanical maintenance activities, including troubleshooting of rotating equipment, pumps, gearboxes, conveyors, hydraulics, and pneumatic systems Develop, optimize, and maintain preventive and predictive maintenance programs Analyze equipment failures and lead root cause failure analysis (RCFA) efforts Support planning and execution of major repairs, overhauls, and shutdown activities Review equipment performance and recommend design or process improvements to improve reliability and reduce downtime Collaborate with operations, maintenance, and engineering teams to improve equipment availability and safety Support maintenance documentation including procedures, job plans, bills of material, and equipment criticality rankings Assist with spare parts strategy, vendor coordination, and technical evaluations Ensure compliance with safety, environmental, and regulatory requirements Manage capital projects, major maintenance projects, equipment installations, and commissioning as required Required Qualifications Bachelor's degree in Mechanical Engineering or related field 3+ years of experience in an industrial maintenance or reliability-focused role Strong working knowledge of mechanical systems, including rotating equipment and industrial power transmission Experience troubleshooting hydraulic and pneumatic systems Ability to read and interpret mechanical drawings, P&IDs, and OEM documentation Strong problem-solving and analytical skills Effective communication skills and ability to work cross-functionally Preferred Qualifications Experience in manufacturing, heavy industry, mining, metals, chemical, or energy environments Familiarity with CMMS systems (SAP PM) Reliability engineering tools experience (RCFA, FMEA, vibration analysis, oil analysis, etc.) Experience supporting continuous improvement or TPM initiatives

The Maintenance Technician is an entry level position in which you will be an integral part of a fantastic team servicing vehicles. STOP looking for a job and START investing in your career as a Maintenance Technician at Firestone Complete Auto Care! Maintenance Technician, Technician, Automotive, Maintenance

Under minimal supervision, installs, repairs, and maintains the following machine manuals, prints, or by referral to building codes: Physical structures. Electrical wiring. Plumbing and fixtures. HVAC Includes motor and engine, CNC, electrical, pneum Maintenance Technician, Technician, Maintenance, Manufacturing, Property Management

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies, and repair items as necessary. Independently performs maintenance as per industry standards. May be required to set up and operate multiple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results, and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower-level technicians and leadership to small teams. Performs more advanced functions as part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associate's degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry, or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power, and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Job Title: Enhanced Building Maintenance Team - General Technician Department: Enhanced Building Maintenance Reports to: Enhanced Building Maintenance Team Supervisor Salary Level 6: $60,588 FLSA Status: Non - Exempt We are seeking a General Maintenance Repair Technician to join our team. Your primary responsibility will preventative and corrective maintenance to various customer facing systems and fixtures that include but is not limited to automatic soap dispensers, faucets and flush valves, paper dispensers, door latches and locks and other miscellaneous repairs across the public areas of the CPTC. Scheduled hours will be centered around 3rd shift primarily with a need to adjust depending on requirements or needs. Responsibilities: The following is a list of duties and expectations within the role: • Adhere to all safety policies and procedures without exception. • Repair and maintain a variety of customer facing systems and equipment. • Maintain work complete and service records for all equipment. • Coordinate and prioritize workload with your supervisor. • Operation of forklift machinery. • Perform other duties as assigned by your supervisor. Skills & Requirements Qualifications and Requirements: • High school diploma or GED preferred. • Must be able to read and write English proficiently. • Minimum of 3 years of experience in a general maintenance or repair environment, plumbing and electrical experience is a plus. • Experience in failure analysis and determining the best repair methods. • Safely and effectively use a variety of hand and power tools. Working Conditions: • Must have a valid GA driver's license and driving record void of recent major moving violations. • Must successfully pass a background check for insurance and security processes. • Must be able to pass a physical agility test. • Ability to lift to 75 pounds and handle a variety of tools, equipment, and supplies. • Most of the workday will be spent standing. • Some outdoor work can be required in all weather conditions. • Hazardous materials handling. • Occasional shift variance to include weekend or holiday work as required. • Steel-toed shoes must be worn on duty. Additional Qualifications: • Commitment to safety, quality, and meeting departmental goals. • Strong interpersonal skills to build relationships with customers, tenants, contractors, and AATC Staff. • Must be a team player and demonstrate strong organizational skills. This position is in Atlanta, GA. Atlanta Airlines Terminal Company is an Equal Opportunity Employer offering competitive compensation and an excellent benefits package. Qualifications

What will you be doing? Preventative maintenance and repair of mechanical, electrical, and Habasit specific equipment. 's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Qualifications Must be 18 years of age Must be cleared on any background screening English literacy High School Degree or GED Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) High Competency of pneumatic and hydraulic components Knowledge of Basic Electrical / Electronic Circuits and Wiring Read and understand Mechanical Blueprints Ability to use a calculator and a tape measure. Intermediate computer skills. Must have working knowledge of OSHA safety requirements. Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate $28.00/Hr - $33.00/HR If you are interested in becoming a part of a World-Class Team, submit your application today! OVERVIEW OF POSITION: Repairs equipment and programs PLC's, including automated machines, controls, panels, relays, circuit breakers, communication systems and alarms. Installs electrical equipment with minimal instructions. FIRST SHIFT IS MANDATORY FOR THE FIRST 6 MONTHS OR UNTIL TRAINING IS COMPLETED. RESPONSIBILITIES OF THIS POSITION: Level 1 Duties · Operate electrical hand tools as well as voltage, ampere and temperature measuring devices. · Work from blueprints, drawings, sketches or layouts. · Diagnose problems in order to replace or repair parts/machinery as required. · Operate and maintain basic Maintenance Department equipment and machinery. · Perform scheduled preventive maintenance as directed. · Troubleshoot and repairs equipment. · Assemble, fabricate and install parts, equipment and machinery. · Notify maintenance management of any abused and or misused equipment and/or machinery. · Notify maintenance management of shortage of supplies. · Participate in problem solving teams. · Follow all housekeeping and safety regulations. · Fill out necessary paperwork. (eMaint program, RMA documentation, Tool Repair, etc.) · Manage assigned workload and prioritize to minimize productivity losses. · Perform Lockout / TagOut procedures as a Habasit "Authorized Associate". · Assist other maintenance personnel. · Perform janitorial duties as directed. (Housekeeping, machine cleaning, facility cleaning, etc.) · Perform snow removal. · Perform grounds keeping tasks as directed. · Is on call to come to work during off shift hours to help out in emergency situations. · Any other duties as assigned. Level 2 Duties · Perform complex wiring assignments. · Install and repair power, lighting, and electronic control circuits. · Provide technical assistance to lower level maintenance electricians. · Improve and maintain preventative maintenance program for Habasit assets. · Repair and maintain equipment as needed and/or as directed by PM schedule. · Ability to program PLC in Siemens and Allen Bradley format. · Maintain OSHA compliance and records for site and equipment. · Work with vendors to produce parts for machines and maintain spare part inventory. · Maintain building and all maintenance contracts, such as cleaning services, landscaping, etc. · Install any additional utility extensions and networking services. · Any other duties as assigned. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Required - High School Degree or GED · Required - Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) · Required - High Competency of pneumatic and hydraulic components · Required - Knowledge of Basic Electrical / Electronic Circuits and Wiring · Required - Read and understand Mechanical Blueprints · Required - Read, Write and Comprehend English. · Required - Minimum of five years maintenance experience/preventative maintenance program facilitator. · Required - Program PLC in both Siemens and Allen Bradley format. · Preferred - Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) · Preferred - Associates Degree in Related Field. · Preferred - Intermediate computer skills. · Preferred - OSHA electrical certification. · Preferred - Must have working knowledge of OSHA safety requirements. · Required - Ability to use a calculator and a tape measure. Education: High school or equivalent (Required) Experience: Industrial maintenance: 5 years (Required) Mechanical knowledge: 5 years (Required) pneumatics: 5 years (Required) Hydraulics: 5 years (Required) Electrical wiring: 5 years (Preferred)

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Inspects, measures, troubleshoots, and repairs complex failures associated with Tool and Die. Develops and writes concise technical documents, including set-up procedures, PM procedures, and troubleshooting procedures. Heat-treats tools or parts. Measures, marks, and scribes metal stock for machining. Smoothes flat and contoured surfaces, using scrapers, abrasive stones, and power grinders, and fits and assembles parts together and into assemblies and mechanisms, using hand tools. Verifies dimensions, alignments, and clearances, using measuring instruments, such as dial indicators, gauge blocks, thickness gauges, and micrometers. Knowledge, Skills, Abilities, & Behaviors Required: Post-secondary technical training or certification preferred At least seven years related experience with tool and die tasks At least five years previous experience with measurement processes and equipment capabilities used in order to perform repairs and adjustments to complex die sets At least two years previous experience with electronic drawing such as AutoCad, Pro-E or Solid Works and ability to modify existing drawings AT least two years previous experience performing heat treat processes on tool and die components Proficiency with failure analysis, reliability studies, and performance enhancements Ability to read and understand quality reports and testing methods Competencies Required: Functional/Technical Skills Peer Relationships Technical Learning Learning on the Fly Developing Others Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $36.78$47.03 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

A Maintenance Technician is responsible for keeping a facility operating and repairing any problems when they are discovered before they have a chance to worsen. A Maintenance Technician will usually be required to perform a wide range of repair tasks around the facility. Primary Job Functions This section describes the primary /essential responsibilities that this job performs. Performing routine maintenance around the building such as fixing structural damage Maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly Applying preventative measures to the building to reduce the risk of future problems Fixing potential safety hazards to avoid injuries Fabrication, welding, electrical, plumbing, Understanding recycling principals Operate various PIV sit-down center Ryder Demonstrate the Company's Core and Growth Values in the performance of all job functions. Follow all OSHA and Company established safety rules and Follow procedures. Secondary Job Functions This section describes the secondary responsibilities that this job performs. Maintain reliable attendance. Actively participate in departmental meetings, training and education. Assist with training other employees and providing backup. Complete other assignments and special projects as requested. Job Qualifications Education: * High School, Diploma or equivalent Experience: * 3+ Years Maintenance experience Knowledge, Skills and Abilities Strong attention to detail Excellent verbal and written communication skills Excellent interpersonal skills Effective time management and organizational skills Work independently as well as in a team environment Document management system Analytical and problem-solving skills Maintain confidentiality Working knowledge of Continuous Improvement Handle multiple projects simultaneously within established time constraints Proficient computer skills, including experience with Microsoft Office Suite, and internet Perform under strong demands in a fast-paced environment Work professionally with customers and co-workers to efficiently serve our customers, treating both with enthusiasm and respect Display empathy, understanding and patience with employees and external customers Respond professionally in situations with difficult employee/vendor/customer issues or inquiries What's In It for You: When you join us, you are eligible to participate in our comprehensive benefits programs, which include: Extended health, dental benefits, and vision insurance Employee Discount from 10% - 30% Life/Disability Insurance Flex Spending Account 401K Paid Time Off & Holidays Paid Birthday Weekly Pay