Ryko Solutions, Inc jobs in Denver, CO - 102498 jobs

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

$7,500 Sign-on Bonus (based on performance and eligibility) $1000 Housing Stipend Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members * Run routes for team members', experience different stores, and meet new customers * Grow sales on the route by building relationships, selling in displays, and completing national initiatives * Attain a route with set days off/schedule with time * Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: * Be 21 years of age or older * Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law * Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: * 401(k) contribution * Health, dental and vision insurance * Financial support to help obtain a degree * Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ********************************************************************************** 2. *******************************************************************************************

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Find out if this opportunity is a good fit by reading all of the information that follows below. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. Compiles alternative packages for purposes of retrofit, upgrade, or alternative functionality of equipment. · Independently performs maintenance as per industry standards; creates maintenance standards and instructions for altered or new manufacturing equipment. · Directs customer counterparts in maintenance optimization efforts, reliability, and preventative maintenance processes. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. Compiles technical manuals, operations, and maintenance processes relevant to equipment upgrades and automation integrations. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Alters, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Conducts on-the-job training and leads technical programs for technical development of customers and coworkers · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 12 years of related experience in specific industry; or, 15 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools, and programming software as appropriate. · Extensive travel required. (Local, National, International) Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, maintenance of applicable process equipment, and automation integration. · Robust experience in programmable logic controllers, field device troubleshooting, maintenance of electrical drive and motor systems, and motion control devices. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $44.97 - $57.53 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

Since 1907, Murphy Company has been a leading mechanical contractor in the St. Louis and Denver markets that provides its professionals the environment, opportunities, technology, and tools to experience a rewarding career. Being a company that prides itself on its core values of employee well-being, enduring relationships, and integrity and professionalism, we know it starts with our employees. We strongly believe our people are our most important asset, and we strive every day to make Murphy a great place to work as we build our clients' visions. We Are Looking for Someone Like You As a Service Dispatcher, you will work in a team environment to provide exceptional service to customers in need of service on the commercial and industrial HVAC, piping, plumbing and controls systems. You will create and schedule service work and coordinate any necessary details with service technicians and customers. You'd also assist technicians with scheduling contract work and perform admin functions as needed. The ideal candidate for this position would be a strong, professional communicator both verbally and in the written form. Attention to detail is essential and always challenging in this emergency and reactive service environment. Top performers in this job are flexible, capable of quickly interpreting direction and implementing plans, and willing to play multiple roles depending upon the team's needs. Our Service team works in a fast-paced, high volume, and fun environment, and you'd be an important part of the operations of our organization. Your Day-to-Day at Murphy Company Extracting and recording critical information from client calls, analyzing appropriate next steps for serving clients, and coordinating/assigning proper technical resources to serve clients. Document and follow-up with service technicians, external vendors, and clients to ensure proper completion of tasks. Effective use of our Service Management Platform (PENTA) and Smartsheet is vital, as is providing internal support for inter-departmental teams across functions. Coordination of manpower for completion of scheduled maintenance, projects, and inter-company support. Bring Your A-Game! Our ideal candidate should possess the following traits: Excellent professionalism and attention to detail. At least 1 year of work experience in a high-volume environment. Self-starter: Must have the ability to work well as part of a team and independently. Technology skills: General comfort using technology and able to learn new tools quickly. Critical thinking: Must have the ability to problem solve creatively and independently. Strong interpersonal skills. At least 1 year of experience using MS Outlook. What We Will Bring to the Table A collaborative, family-friendly work environment Knowledge and expertise that has helped us grow and thrive for the last 112 years Competitive pay and an excellent benefits package, including health and life insurance, a robust wellness program, 401(k), and profit sharing. A personal time off plan that rivals our competitors

Title: Maintenance Technician Reports to: Director of Engineering About the Company AC Pro, a family-owned business, has been providing heating and air conditioning products since 1986. Our locations in California, Nevada, Arizona, and Utah offer the best products and services in the industry. Our company CULTURE is of first and foremost importance to us. Ever since the inception of AC Pro, we have striven to provide a work atmosphere that balances finding innovative ways to exceed customer expectations with providing a fulfilling lifelong career for our associates. We have strong core values that are unquestionably right and on the side that benefits our consumers, dealers, associates, and suppliers - not ourselves. The culture at AC Pro has and always will be heavily focused on our team. We want every one of our associates to look forward to coming to work each and every day. About the Position A key part of AC Pro's business is the manufacture of sheet metal components, we are seeking a dynamic and proactive maintenance technician to join our team that is working towards creating and maintaining a state-of-the-art manufacturing facility. This role will split between maintenance activities and manufacturing activities. Responsibilities: Perform preventative maintenance on production equipment and facility Troubleshoot, identify issues and repair equipment Update maintenance work orders with current status of repairs Ensure equipment reliability to maximize production line productivity and minimize downtime Fabricate and assembly HVAC Sheet Metal fittings Operate sheet metal fabrication machines, including plasma cutter, spot welders, riveters, press brakes, etc. Support engineering department with installation and start-up of equipment and machines Perform upgrades on equipment as directed by engineering Work on multiple tasks simultaneously Communicate and collaborate cross-functionally to assist team to solve operational issues Embrace a teamwork philosophy to influence the team to meet or exceed production and quality goals This role requires regular presence on the plant floor, lifting up to 40 lbs occasionally, may operate forklift and manufacturing equipment and occasional work in poor weather conditions, including heat, cold, rain, or snow. This role may require off-shift and weekend work and some local travel (less than 5%) Required Qualifications: High School Diploma or GED Equivalent Minimum of 5 years of machine maintenance experience, working on rotating machines, gantries and robotics Experience in troubleshooting and repairing of various types of production & facility equipment Experience of proper mechanical and electrical disassembly and assembly techniques Knowledge of mechanical components, such as gearboxes, punches, conveyors and actuators Knowledge of mains voltage and low voltage components, switch gear, motors and drives Knowledge of pneumatic and hydraulic systems and components Ability to read blueprints, schematics and manuals Knowledge and experience of the correct use of hand tools, power tools and precision tools and electrical instruments Able to work with minimal supervision and on multiple projects simultaneously Good level computer literacy, using Microsoft Word, Excel, Outlook and Internet Explorer or similar Strong English communications skills, both written and verbal Must speak Spanish fluently Good interpersonal skills; strong relationship building skills Strong organizational skills; exceptional attention to detail Physical stamina and strength to lift heavy items Preferred Qualifications: Associate degree or Certificate (Mechanic, Electrician, Engineering) 10+ years of machine maintenance experience, working on rotating machines, gantries or robots Familiar with PLCs & HMIs, Servo motors and robotics Physical Requirements: This role requires regular presence on the plant floor, lifting up to 40 lbs. occasionally, may operate forklift and manufacturing equipment and occasional work in poor weather conditions, including heat, cold, rain, or snow. This role may require off‐shift and weekend work and some local travel (less than 5%) Ourculture & environment: Extremely fast paced environment. Leadership is interested in your ideas to improve the job and company. Good ideas and hard work are valued over titles and degrees. We are committed to diversity in the workplace. As a member of our team, you will enjoy: Medical: HMO & PPO options Dental: HMO & PPO options Vision Plan Company-Paid Life Insurance Health Flex Spending Account (FSA) 401(k) Plan Match Employee Assistance Program (EAP) Vacation & Sick Pay Paid Holidays Veteran's day off with pay for associates who served in the military Schedule: Morning shift Pay Range: Starting at $ $ per hour (DOE) All candidates are required to pass a pre-employment drug screen following an offer of employment, as well as provide documentation of eligibility to work in the Equal Opportunity Employer / Veterans encouraged to apply

About Omni Omni is a business intelligence and embedded analytics platform that helps customers improve self-service, accelerate AI adoption, and build customer-facing data products. Whether users prefer AI, spreadsheets, SQL, or point-and-click, Omni makes it easy for anyone to explore and act on data - all from the same platform. At the core of Omni's platform is a built-in semantic layer that ensures consistency, trust, and AI readiness. Headquartered in San Francisco, Omni has office hubs in Santa Cruz, Philadelphia, Dublin, and Sydney, with team members around the world. The company has raised $97M in funding from leading investors including ICONIQ Growth, Theory Ventures, First Round Capital, Redpoint Ventures, Google Ventures, Snowflake Ventures, and Databricks Ventures. The Role As a Technical Account Manager, you'll serve as a dedicated, strategic technical advisor for Omni's largest and most complex enterprise customers, partnering closely with Professional Services, Product, and Support teams. Your mission is to help top accounts achieve faster time-to-value, reduce inbound escalations, ensure long term success, and contribute reusable technical assets that scale with Omni's growth. You do this by partnering with Sales and Professional Services to design a scalable implementation plan, knowing and documenting the core use cases and nuances of your customers tech stack, and consistently working to ensure that all future technical recommendations are scalable as Omni platforms continue to evolve. TAMs blend technical expertise with customer-facing skills. You'll help enterprises embed Omni into their workflows, optimize performance, and expand their use of our BI platforms. Your work will directly influence adoption, retention, and expansion at scale. Responsibilities Act as the primary technical advisor for our top enterprise customers. Partner with Professional Services, Product, and Support teams to ensure customers achieve faster time-to-value and sustainable adoption. Guide customers on best practices for architecture, integrations, embedding, and data modeling. Proactively identify technical risks and create mitigation plans to reduce inbound escalations. Lead technical enablement workshops, health checks, and design reviews for customers, and internally to increase the subject matter expertise on the team. Help customers optimize query performance, dashboard usability, and user adoption. Serve as the technical voice of the customer internally, influencing product roadmaps and support processes. Build and maintain reusable implementation assets (templates, playbooks, technical documentation) that scale across Omni's customer base. Partner with Sales and Customer Success Managers to surface cross-sell and upsell opportunities through technical insight. Provide technical validation in expansion and renewal cycles. Influence Net Dollar Retention (NDR) by demonstrating the scalable value of Omni. What We're Looking For 5+ years in a technical customer-facing role (Customer Success Engineer, Technical Account Manager, Solutions Architect, or Data Consultant). Deep knowledge of data & analytics technologies: SQL, semantic layers, data warehouses (Snowflake, BigQuery, Redshift), BI platforms, APIs, embedding strategies. Strong architectural thinking: able to map complex data ecosystems to Omni's platform. Excellent communicator-comfortable engaging both C-level execs and data engineers. Consultative and proactive, with the ability to span multiple enterprise accounts. Strong problem-solving and attention to detail. Bonus Points Experience driving adoption and expansion in a SaaS analytics/BI environment. Familiarity with customer success frameworks and metrics (GRR, NDR, adoption KPIs). Track record of influencing enterprise technology strategy. Comfortable working with global teams and customers across time zones. Compensation & Benefits On Target Earnings (OTE): $145k-$208k, 70/30 salary-to-variable split. Comprehensive health, dental, and vision coverage. Equity in a fast-growing company. Flexible, collaborative work environment. #J-18808-Ljbffr

Berkot's Super Foods is seeking an Entry Level Grocery Buyer. This candidate will support the purchasing and procurement functions for assigned product categories within Berkot's grocery department, while also learning more about the grocery buying industry along the way. This role assists in maintaining optimal inventory levels, ensuring product availability, monitoring vendor performance, and upholding quality and pricing standards. The Grocery Buyer works closely with our Senior Grocery Buyer, store operations, marketing/pricing teams, and suppliers to ensure a consistent and profitable product assortment that aligns with company objectives Responsibilities Assist in sourcing, selecting, and purchasing grocery products under the guidance of senior purchasing staff. Monitor inventory levels across stores and distribution centers to help maintain appropriate stock and minimize out-of-stocks or overstocks. Review sales reports, forecasts, and market trends to support purchasing decisions. Collaborate with vendors to obtain product information, pricing, lead times, and promotional opportunities. Enter and maintain accurate purchase orders, product data, pricing updates, and item setup documentation in company systems. Support the execution of promotional programs, seasonal buys, and assortment changes. Communicate with store teams regarding product availability, delivery issues, or substitutions. Monitor product quality and address any issues or discrepancies with vendors as needed. Qualifications Associate or bachelor's degree in Business, Merchandising, or related field required. 0-2 years of marketing experience, preferably in retail, grocery, food service, or consumer goods is highly preferred. Strong organizational skills with the ability to manage multiple tasks and deadlines. Basic understanding of supply chain, merchandising, and retail operations. Proficiency in Microsoft Excel and other office software. Familiarity with inventory or ERP systems is a plus. Strong communication and interpersonal skills for effective vendor and internal team interactions. Detail-oriented with a focus on accuracy and data integrity. Job Type: Full-time Work Location: In person Benefits: 401(k) matching Dental insurance Vision insurance Health insurance Life insurance Paid time off

Jobe Materials, L.P. (“Jobe Materials”) is seeking a Safety Director Jobe Materials is a family-owned ready-mix concrete, asphalt, and construction aggregates supplier operating in West Texas and Southern New Mexico with over 700 employees. The company also manufactures precast and prestressed concrete products, and operates three railyards that provide track space for transloading activities and railcar storage. The company operates its own quarries to produce its own aggregates, and has its own fleet of trucks for delivery of its materials. Founded in March 2005, Jobe Materials has proudly served West Texas and Southern New Mexico with top-quality construction materials and industry expertise. While our company has been operating for 20 years, the Jobe name and our roots in the construction materials industries go back over five decades. Our leadership, operations, and core values reflect a long-standing tradition of excellence in building the foundations of our communities. Responsibilities: · Leading and developing a team of employees with the company's Safety Department · Overseeing and updating the company's safety programs and safety goals. This includes implementing new and existing safety polices and protocol. · Representing the company in front of OSHA and MSHA representatives during any inspections and/or investigations · Conducting audits and inspections of company facilities to ensure compliance with all laws and regulations. · Conducting regular risk assessments across all operations, identifying vulnerabilities, and developing mitigation plans to minimize exposure. Collaborating with other departments to implement best practices for risk reduction. · Researching, evaluating and recommending changes to operations to improve the company's safety performance · Training company employees on safety policies and regulations. · Regularly reporting to company management regarding the company's safety performance · Developing proactive processes, procedures, systems, and metrics to drive continuous improvement towards reducing or limiting potential hazards at company facilities. · Other responsibilities as delegated and determined by senior management. Qualifications: · Bachelor's Degree, preferably in safety or a related field. · At least eight years of experience in safety fields · At least four years of experience in a leadership or management role · Prior experience in the construction industry is preferred. · Prior managerial experience · Certified Safety Professional (CSP) designation is preferred. · Knowledge of OSHA regulations, inspections and investigations. Preferred to have OSHA “Train the Trainer” certification. · Knowledge of MSHA regulations, inspections and investigations is preferred. · Bilingual skills are preferred. · Strong organizational skills and attention to detail · Valid Driver's License is required Salary Range: Salary will be based on experience. Company Benefits: Jobe Materials provides competitive and generous benefits for its salaried employees. The company provides a 401(K) retirement plan with an employer match component. Jobe Materials prioritizes the health of its employees, and its health insurance benefits for its employees reflect that. A company cell phone and other necessary technology devices will be provided. Additional benefits would be discussed with candidates during the interview process. Equal Opportunity Employer: Jobe Materials is an equal opportunity employer. Jobe Materials shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. Applicants may apply using websites where this job posting is listed. Please send your resume with cover letter and references, salary requirements, and safety policy writing samples to: Garrett J. Yancey, General Counsel, at ******************.

Visit Huntington Beach (VHB) is the official destination marketing organization for Huntington Beach, California - Surf City USA. A 501(c)(6) private, non-profit organization, VHB's mission is to support and advocate for the economic vitality and quality of life for the Huntington Beach community through inspirational destination marketing and brand management. Its programs encompass marketing, public relations, group sales, visitor and partner services, advocacy, and tourism development. VHB embodies a community-focused spirit of service that is proactive and strategic. The organization emphasizes teamwork, staff engagement and commitment, inclusion and belonging, professional development and accountability, community support, and sustainability. Representing the best of Huntington Beach at a professional, high-quality, laid-back luxury level, the team is dedicated to delivering the Surf City USA brand promise. Visit Huntington Beach is seeking an accomplished, collaborative President & CEO to lead a dedicated, high-performing team with an annual budget of approximately $11M. The President & CEO will oversee the organization's operations, culture, values, and mission while serving as the strategic and visionary leader for the Board, elected officials, community partners, stakeholders, and visitors. This leader will position Surf City USA competitively in both domestic and international markets, ensuring the destination's long-term growth and sustainability. The ideal candidate will foster a positive, inclusive, and high-performance workplace culture that empowers team members to thrive while aligning individual strengths with organizational goals. A proven advocate for destination marketing and management, the successful candidate will demonstrate a track record of positively impacting residents' wellbeing while growing tourism in a way that strengthens the community's economic vitality. Key Qualifications: Provide leadership to ensure the annual program of work is presented, approved, executed and accomplished while aligning with the approved budget and related expectations of various stakeholders including the VHB Board of Directors. Represent VHB and the related visitor industry as a key voice of advocacy in the arena of public opinion, at the local, regional, state, national and international levels. Think strategically and tactically in incredibly challenging times, using this unique skill set to inspire a culture of success, both internally and throughout the community. Develop and maintain relationships with key stakeholders which help Surf City USA deliver on HB's destination brand promise. Ultimately responsible for hiring, discharge, direction, review and supervision of all employees, but especially the senior leadership team. Serves on committees and Board of Directors of related organizations. #J-18808-Ljbffr

Electro-Mechanical, LLC is seeking an experienced Maintenance Manager to join our Bristol, VA facility, supporting our Federal Pacific Transformer (FPT) division. In this role, you'll oversee maintenance operations while driving process efficiency across manufacturing, quality, and facility support. This is a critical leadership position that directly contributes to cost reduction, process optimization, and long-term production reliability. This is an exciting opportunity for a hands-on professional with a strong maintenance background and a passion for continuous improvement to make a meaningful impact in a highly competitive manufacturing environment. How You Will Make an Impact: Lead and manage the Maintenance Department, ensuring strong support for both production and facilities while prioritizing preventative strategies and resource allocation. Drive manufacturing process improvements by analyzing workflows, identifying inefficiencies, and implementing best practices to increase operational efficiency and reduce costs. Recommend and support facility layout changes and production floor enhancements that improve material flow and streamline operations. Oversee implementation of quality testing protocols to meet or exceed industry standards, resolving production bottlenecks in final test areas. Collaborate across departments to lead cross-functional improvement projects that enhance operating performance and reduce waste. Partner with vendors and capital equipment suppliers to identify cost-effective technologies and equipment upgrades. Balance ongoing maintenance needs with project deadlines while aligning departmental objectives with company-wide cost containment goals. What You Bring: Minimum of 10 years of hands-on maintenance experience in a manufacturing environment. At least 5 years of experience in a leadership or supervisory role within a maintenance team. Proven expertise in process improvement, waste reduction, and cost savings initiatives in a production setting. Experience with facility layout planning and equipment specification or sourcing. Strong collaboration and communication skills to effectively engage cross-functional teams and external vendors. Technical school education, PLC programming/troubleshooting skills, or experience with automation/robotics is strongly preferred. A bachelor's degree in Industrial Engineering or a related field is a plus, but not required. About Federal Pacific Transformer (FPT) FPT provides low and medium voltage transformers and electrical switchgear for industrial, commercial, and mining applications. With all production and engineering consolidated at our Bristol, VA location, FPT operates in a highly competitive space where cost management and continuous improvement are essential for success. Travel Minimal travel required (primarily vendor-related or training). EMC expects that every team member will be guided by EMC's Guiding Principles. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed PandoLogic. Category:Building Maintenance, Keywords:Building Maintenance Manager, Location:Bristol, VA-24201

PAIGE is seeking a talented Jr. Graphic Designer to join our growing team in Culver City. This role will report to the Sr. Content Manager, and work closely with marketing, PR, social, sales, retail and merchandising teams to develop graphic solutions and content that help build a strong, creative & consistent brand voice across all channels. Responsibilities: Work with the Senior Content Manager to support graphic needs - developing design concepts for digital and print assets including but not limited to - lookbooks, line sheets, paid media, social media content, sales and retail collateral. Design modern, compelling and elevated seasonal look books. Create digital assets in multiple variations and sizes for paid social platforms (Instagram, Google, YouTube, Pinterest, etc.) Create and execute monthly press assets. Create various branded materials. Assist the team with photo editing as needed. Required Skills: Minimum 3 - 5 years of professional experience in graphic design. Strong knowledge of trends in typography, layout, color and photography. Up-to-date on design trends. Must be focused on attention to detail with an ability to communicate clearly and concisely. Works well under pressure; effectively handles tight deadlines, revisions, ad hoc requests, and changing priorities. Well organized with ability to multitask between multiple projects. Expert in Adobe Creative Suite (Photoshop, Illustrator, InDesign) Strong interpersonal skills - loves to collaborate and be a team player. Video editing experience a plus. About the Company: PAIGE, we believe that every choice we've ever made-the big ones, the small ones, the right or the wrong-has led us to this moment. We believe that the best story you can make and share is the one of your own life, and we are passionate about designing pieces that reflect and celebrate it. From the beginning, our founder & creative director Paige Adams-Geller embraced every moment, aiming to inspire and empower as her story evolved. Her journey began in Los Angeles, where her entrepreneurial spirit took her from working as one of the top fit models in the industry to launching her namesake collection in 2004. Today, she sits at the helm of PAIGE as the only female founder in the denim industry, continuing to challenge convention and infuse her colorful spirit and chic sensibility to every collection she designs. Our brand first launched in February 2005 in high-end retailers including Intermix, Ron Herman, Bergdorf Goodman and Harvey Nichols. Paige's designs became an instant obsession of consumers, celebrities, and prominent fashion editors. Quickly, we unveiled our men's, petites and maternity ranges - all created with the same commitment to the craft. As our story continues to evolve, we remain devoted to the details. We only partner with the best wash-houses in the country, which happen to be in our hometown of Los Angeles. Every style we create is wear-tested, and tested again. We are completely obsessed with designing pieces you'll live in-jeans that go from morning to moonlight; the perfect pair that works like a charm, always; pieces to help you stand tall in what you're wearing, and take you exactly where you want to go.

Job ID 2026-13521 # of Openings 1 Category Health Benefit Type Salaried High Fringe/Full-Time LMI seeks an experienced Epidemiologist with a focus on Musculoskeletal Injury (MSKI) to support the U.S. Army's Holistic Health & Fitness (H2F) initiative as a member of the Analytics functional team within the H2F Program Support Team. This position requires a Secret security clearance. This position is an on-site psition in Newport News, VA. The Epidemiologist is responsible for applying population-level epidemiological methods to analyze injury incidence, prevalence, risk factors, and outcomes related to MSKI across Army populations. This role supports readiness assessment, injury-risk awareness, and evidence-based decision support within the Holistic Health and Fitness Management System (H2FMS). The role is analytic and advisory in nature and does not provide clinical care or treatment recommendations. The Epidemiologist works closely with the Technical Project Manager, data engineers, data governance specialists, AI/ML engineers, research psychologists, tactical sports scientists, and software teams to ensure MSKI-related data are appropriately structured, analyzed, and integrated into analytics, dashboards, and decision-support products delivered through the Government-managed H2F application. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Responsibilities Conduct population-level analyses of musculoskeletal injury incidence, prevalence, severity, and outcomesacross Army populations. Identify injury patterns, trends, and risk factors related to training exposure, workload, recovery, and readiness. Support development and refinement of injury surveillance approaches aligned with Army H2F objectives. Apply epidemiological and biostatistical methods to assess relationships between MSKI and contributing factors such as workload, conditioning, sleep, nutrition, and behavioral indicators. Collaborate with tactical sports scientists and research psychologists to contextualize injury findings within performance and readiness frameworks. Support development of evidence-based indicators and analytic constructs related to MSKI risk. Work with data engineers and data scientists to ensure MSKI-related data are appropriately structured, governed, and integrated within H2FMS. Support translation of epidemiological findings into analytic features, metrics, and model inputs. Assist in validation and interpretation of analytic models incorporating injury and health data. Support preparation of analytic products, briefings, and summaries that communicate MSKI trends and insights to Government stakeholders. Clearly articulate assumptions, limitations, and appropriate use of epidemiological findings. Contribute to evidence-based recommendations that inform injury-risk awareness and readiness discussions (without providing clinical guidance). Contribute to documentation of analytic methods, data sources, assumptions, and limitations. Support adherence to Government data governance, privacy, and usage requirements. Coordinate with other analytics and research team members to ensure analytic consistency across H2FMS products. Qualifications Required Qualifications Master's degree or PhD in Epidemiology, Public Health, Biostatistics, or a closely related field. Demonstrated experience conducting epidemiological analyses, preferably related to musculoskeletal injury, injury prevention, or occupational health. Strong understanding of population-level health data, surveillance methods, and statistical analysis. Experience supporting analytic or research efforts in military, government, public health, or large-scale organizational environments. Ability to collaborate effectively within multidisciplinary teams spanning analytics, research, and software development. Strong written and verbal communication skills. Ability to obtain and maintain a Secret security clearance. Desired Qualifications Experience analyzing MSKI data in military, tactical, athletic, or physically demanding populations. Familiarity with integrating injury and health data into analytics platforms or decision-support systems. Experience working alongside data science or AI/ML teams. Prior experience supporting DoW or federal customers. Location & Travel Duty Location: This is an in-person position requiring on-site support at Fort Eustis, Virginia. Travel: Limited travel outside Fort Eustis may be required in support of program coordination or stakeholder engagement. Target salary range: $110,000 - $200,000 The salary range displayed represents the typical salary range for this position and is not a guarantee of compensation. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances. LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Apply fast, check the full description by scrolling below to find out the full requirements for this role. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $31.70 - $40.55 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

A technology solutions provider in California seeks a Director of Software Engineering for its Innovation Lab. This leadership role involves defining strategies, mentoring engineers, and advocating for technology investments. Ideal candidates must have a BS in Computer Science, over 10 years of experience in software development with a focus on AI, and be skilled in leading cross-functional teams. The position offers a hybrid work schedule and a competitive salary package, contributing to meaningful technology advancements and innovation. #J-18808-Ljbffr

Preco is now hiring for a Full-Time Metrologist in Somerset, WI. The Metrologist is responsible for developing, optimizing, and maintaining precise measurement routines and systems that ensure product quality and conformance to specifications. This role involves creating turnkey CMM (PC-DMIS) and MicroVu measurement programs for production and inspection use, troubleshooting and improving existing routines, and collaborating with engineering. The position also supports critical quality functions such as First Article Inspections (FAIRs), capability studies, Gage R&R, and calibration activities. Preco is a leading designer and manufacturer of precision automated processing systems for high-speed and high-accuracy cutting, perforating, welding, and other specialized industrial processing applications. With our proprietary die cutting and laser-based manufacturing capabilities, Preco has also become one of the largest contract manufacturing service (CMS) providers in North America. Key Responsibilities: Create measurement routines on the CMM (PCDMIS) and MicroVu that are turnkey for production and inspectors. Troubleshoot and correct issues with current measurement routines. Lean out current measurement routines making them as efficient as possible. Eliminate waste of movement or unnecessary measurements on the CMM. Work with engineering to create robust fixturing to stage components and assemblies for measurement on the CMM and MicroVu. Perform First Article Inspections (FAIRs) on components and assemblies. Populate FAIR form along with a bubble numbered print of the current revision. Gather data for Gage R&R's, DOE's, and capability studies. Populate minitab with data for Engineering analysis. Review measurement data to ensure accuracy, consistency, and reliability. Identify and remeasure outlier data points. Author measurement procedures (MP's). Create measurement routines on the CMM for the calibration of production gages. Work with calibration to maintain measurement gages. Complete inspections for production as necessary. Provide technical support and advice to other departments or personnel. Train others on proper measuring equipment and measuring techniques. Collaborate with engineers to resolve measurement challenges. Perform any necessary equipment checks to ensure proper calibration and functionality prior to use. Maintain a clean, organized work area. Culture Development: Strong team player with excellent interpersonal skills; able to collaborate effectively and professionally with individuals across various roles and technical backgrounds. Committed to excellence and to serving others across all levels of the organization and beyond. Ability to work and be effective with minimal direct supervision. Strong analytical and problem-solving skills. Detail-oriented with a commitment to accuracy. Drive a positive and inclusive workplace culture. Adhere to all safety regulations and company policies. Job Qualifications: High School Diploma or equivalent. 5+ years of experience with CMM programming. Experience programming for complex parts. Ability to identify outliers and spot patterns in datasets. Strong computer skills, including proficiency in Microsoft Word and Excel. Preferred Qualifications 2-year Technical Degree in Quality or related field. Real-world application of PC-DMIS (Personal Computer Dimensional Measurement Interface Specification) is strongly desired. 5+ years of experience in machining, blueprint reading, and interpreting GD&T (Geometric Dimensioning and Tolerancing) is preferred Our dedicated staff keeps us at the leading edge of precision automated processing systems in our industry. When you work at Preco, you have the opportunity to apply your skills to create optimal solutions for our customers. We have a collaborative culture and a team united by a passion to provide solutions to our customers. Preco has partnered with Hueman for its recruitment needs. If you are interested in learning more about a career with Preco as a Metrologist, apply today!

A leading technology service provider is looking for a professional with over 8 years of experience in IT to lead diverse teams and manage high-profile projects in San Jose, California. The role involves developing delivery metrics, improving service quality, and ensuring operational excellence in a dynamic environment. Exceptional leadership, technical knowledge, and analytical skills are essential. Competitive salary and benefits included. #J-18808-Ljbffr

Key Responsibilities ● Define project scope, objectives, timelines, and deliverables. ● Gather requirements from Edge Strategy, Delivery, Operations, and cross-functional (XFN) partners. ● Manage supplier onboarding for AMER & EMEA, including NDA intake and processing. ● Validate compliance, financial, and ESG considerations before project initiation. ● Create and maintain project plans, timelines, schedules, and task assignments. ● Open and scope I-CON / CKT Jira tickets to initiate project workstreams. ● Identify dependencies and align resource needs with Delivery, Ops, and other teams. ● Lead project kickoff meetings and establish communication frameworks. ● Provide end-to-end project coordination across Edge Strategy, Delivery, Ops, Engineering, Finance, Legal, and other teams. ● Run weekly project check-ins, status meetings, and escalation reviews. ● Facilitate issue escalation, follow-ups, and cross-team resolution tracking. ● Track task completion and ensure alignment with SLAs, timelines, and quality standards. ● Maintain project dashboards, trackers, and RAID logs. ● Provide status updates and leadership reports with clear progress metrics. ● Monitor risks, blockers, issues, and scope changes, developing mitigation plans as needed. ● Ensure compliance with policies, governance requirements, and operational readiness standards. ● Maintain accurate project documentation and ensure Jira data integrity. ● Perform manual contract and pricing data entry (PVF, contract pricing) when required. ● Capture actions from monthly planning and cross-functional alignment sessions. ● Validate data completeness for downstream teams and stakeholder handoffs. ● Verify delivery completion across responsible teams. ● Finalize and close Jira tickets and associated documentation. ● Archive project materials in compliance with internal standards. ● Conduct lessons learned sessions and transition completed work to operational owners. Qualifications ● 2-5+ years of project management experience, preferably supporting technical or operations teams. ● Strong organizational, communication, and stakeholder management skills. ● Proficiency with project management tools (Jira, Monday.com, Asana, MS Project, Smartsheet). ● Understanding of risk management, change control, and cross-functional coordination. ● Experience with supplier onboarding, compliance processes, or data center/Edge workflows a plus. ● PMP, CAPM, Agile, or similar certification preferred.

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr