Field Service Technician jobs at S&C Electric

ABM Industries is seeking an Electrical Field Test Technician (NETA 3,4 or equivalent) to join our Electrical Power Services team. The Electrical Field Test Technician is responsible for the safe and efficient installation and testing of electrical power distribution equipment for customers in the assigned territory. In this role, you will travel approximately 50% of the time, working both independently and with a crew, and handle the performance and management of routine, moderately complex, and complex tasks and projects, record-keeping, evaluation of test data, and preparation of field service reports. Additionally, Level 3 and 4 Technicians will be responsible to coach, mentoring, training, developing, and supervising Level 1 and 2 Trainees and Assistants. Position Summary Pay: $60.00-$80.00 hourly. The pay listed is the salary range for this position. A specific offer will vary based on applicant's experience, skills, abilities, geographic location, and alignment with market data. ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM 2025 Employee Benefits | Staff & Management Essential Functions Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems. Supervise Trainees, Assistants, and Technicians in the completion of electrical testing duties. Guide, mentor, train, and supervise Level 1 and 2 certified NETA Trainees and Assistant Technicians. Observe testing, assign work on projects to capable technicians, ensure testing of similar items is consistent across test technicians Track project scope completion and communicate ABM and Customer Management Maintain, test, repair, rebuild, and replace low, medium, and high-voltage switchgear and circuit breakers. Troubleshoot automatic transfer switches. Test and inspect low, medium, and high-voltage cable installations. Maintain, test, and repair transformers and related equipment. Test and calibrate solid-state and electromechanical relays. Perform relay calibration and power metering. Conduct low and medium-voltage motor control center and contractor testing. Start-up, troubleshoot, and repair generator controls and transfer schemes. Test and commission protection and control systems on high voltage substations. Sample and interpret insulated fluids. Complete Job Hazard Analyses including but not limited to arc-flash and shock analyses Review and submit timecards, expense, and project reports. Document test results and complete field reports. Rotate emergency on-call duty. Maintain strict compliance with regulatory laws Assist in the sales process acting as the technical expert in electrical testing and maintenance of electrical equipment Qualifications Must have a minimum of 5 years experience in electrical testing. The candidate should have experience working with a team. Experience in working on projects Familiar with NETA Acceptance and Maintenance Testing Standards Familiar with NFPA70E Electrical Safety standards Ability to troubleshoot electrical performance deficiencies Ability to travel regionally and nationally 50% Knowledgeable in lockout/tag-out and hazardous energy control procedures. Clean Driving Record and Drug-Free Preferred Qualifications Familiar with NETA Acceptance and Maintenance Testing Standards Hold a current NETA Level 3 or 4 or NICET equivalent, certification #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Job Title: Electrical Field Test Technician (NETA III/IV or NICET Equivalent Location: Cranberry Township, PA Employment Type: Full-Time, Direct Hire Elevate Your Career with ABM Electrical Power Services ABM Industries is looking for a skilled and experienced Electrical Field Test Technician to join our Electrical Power Services team. If you're a NETA Level III or IV Technician or hold NICET certification (or equivalent experience), this is your opportunity to work with a leading NETA-accredited organization that values expertise, leadership, and career advancement. As an Electrical Field Test Technician, you'll take charge of testing, troubleshooting, and commissioning power systems from low to high voltage. You'll also guide and mentor junior team members while working on complex, mission-critical projects in the field. What You'll Do Travel to client sites to inspect, test, troubleshoot, and start-up electrical systems Lead and mentor Level I and II Trainees and Assistants in technical tasks and field operations Assign work, review performance, and ensure consistent execution of testing procedures Conduct acceptance and maintenance testing for switchgear, relays, transformers, cables, and motor control centers Test and calibrate solid-state and electromechanical relays (including SEL 700G or comparable) Operate tools and software such as Enoserv RTS, Megger, and Omicron testing equipment Analyze test data, perform insulated fluid sampling, and interpret electrical performance issues Complete Job Hazard Analyses, including arc flash and shock hazard assessments Document all results in detailed field service reports Rotate on-call duties for emergency response and service Assist the sales team by providing technical expertise and recommendations Ensure compliance with NETA, NFPA70E, and ABM safety and quality standards What We're Looking For Minimum Requirements: 5+ years of experience in electrical testing and power system services Current NETA Level III or IV, or NICET equivalent certification Proven experience leading and mentoring technicians in the field Ability to manage multi-month, medium to large-scale projects Familiarity with NETA ATS/MTS Standards and NFPA70E Proficient in lockout/tagout and hazardous energy control procedures Excellent communication, leadership, and problem-solving skills Clean driving record and ability to travel nationally (up to 90%) Preferred Qualifications: Associate's degree or higher in Power Systems or related field Skilled in troubleshooting electrical faults, especially ground faults Familiarity with generator controls, protection systems, and high-voltage substations Why ABM? Competitive Compensation: Top-tier hourly pay plus overtime Career Progression: Work with the best and grow with continued support and training Comprehensive Benefits: Medical, dental, vision, 401(k), PTO, and more Team Environment: Join a collaborative crew of professionals who take pride in powering critical infrastructure Join a company that powers success-on every level. Apply now to bring your expertise to ABM Electrical Power Services. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM Team Member Benefits | Front Line Team Members | (Programa de Beneficios de ABM) #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Electromechanical Technician ***$5000 Hiring Bonus*** Charter Wire is a leading Tier 1 supplier and manufacturer of Engineered Shaped Wire, Cold Finished Bar, and Cold-Headed and Stamped Components to various industries, including Automotive, Agriculture, Construction, Consumer, Industrial, and Oil & Gas. Charter Wire is a member of the Charter Manufacturing family of companies. Why Work Here: SCHEDULE: Get a dependable 8-hour first shift, Monday-Friday, with occasional overtime. BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off. GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement-we promote from within. SAFETY: Work in an environment committed to safety and continuous improvement. STABILITY: Join an established Midwest company with four generations of family ownership. Position specifics: Location: Charter Wire - 7850 N. 81st Street, Milwaukee, WI 53222 Shift: 10:00 PM - 6:00 AM, Monday-Friday What You'll Do: As an Electromechanical Technician, you'll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment. Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices Perform preventive maintenance to reduce downtime and ensure equipment reliability Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals Collaborate with cross-functional teams to support continuous improvement Follow safety protocols and use appropriate PPE Support process improvements and participate in ongoing training What You'll Need: Technical degree in a related field, journeyman's card, or 5+ years of industrial maintenance experience Proficiency in reading complex electrical schematics and code books Broad knowledge of electrical codes, electronic controls, and electrical theory Experience with line setups, inspections, and electrical testing equipment Strong math skills (fractions, percentages) Nice to Haves: Experience with PLCs and drives (Allen Bradley, Siemens) Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems Experience with welding/torch equipment and precision measuring tools Excellent communication and teamwork skills Problem-solving mindset and eagerness to keep learning Physical Requirements: Frequent standing and walking Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs Minimal climbing and lifting over 100 lbs Ability to meet physical demands with or without reasonable accommodation Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire. We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$32.64-$41.75 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Field Service Management (FSM) Analyst Must Have Skills Has 3+ years as Systems Analyst focused on FSM Has utility industry experience Can gather requirements, design processes, and test systems Can support integrations (APIs, middleware, data migration) Understands mobile field service applications

Pactiv Evergreen is now a part of Novolex. Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries, including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Our innovative product portfolio is designed to meet the diverse needs of businesses worldwide and the millions of customers they serve. Through continuous investment in research and development, we are committed to engineering more sustainable choices for the future. Our extensive manufacturing network spans North America and Europe, including two world-class plastic film recycling centers. Discover more about Novolex, our 20,000+ family members and our commitment to innovation and sustainability at **************** Our Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. **$10,000 Sign On Bonus Field Service Technician provides technical service and support for customers who own and operate Evergreen filling machines. The technician is trained and knowledgeable to install, inspect, troubleshoot and service this equipment. The technician also trains the customer's personnel on proper operating and maintenance techniques to ensure good packing outputs. · Conducts/controls service activities as assigned to ensure timely customer support and safety are achieved while meeting the budgeted goals and objectives for productivity and utilization. · Communicates well with central scheduling, management, other departments and customers. · Functions as the equipment service technician within the departmental advising EPE service management and/or engineering of any problems or situations with models of current or modified design. · Provides learning experience for both customer and EPE plant personnel on machine operation. · Learns and grows skill sets and competencies to achieve both business and personal development objectives. · Meets corporate business and team objectives for antitrust compliance, business information protection, EEO, safety, quality ethical behavior and learning. · Performs the job safely within an environment which the technician does not control. Maintains high performance of the paper packing equipment to defend against the competition Requirements: o High school diploma or equivalent. o Strong mechanical skills and knowledge. o Ability to read electrical schematics, use meter & troubleshoot electrical circuits. o Good working knowledge of pneumatics (valves, air cylinders, etc.) o Must be a good communicator (including written and verbal English) o Self-driven to work alone and also in teams, when needed. o Travel to customer site within assigned territory/region. - 70% travel o Valid driver's license. o Working knowledge MS Office Suite skills (word, excel, outlook and power point) Desired Requirements: o Working knowledge to verify inputs & outputs of a PLC and other analog components from HMI (Note: not required to program PLC or trouble shoot PLC programs) o Experience in operating / maintaining packaging equipment or equivalent in dairy / juice industry. o Possess a passport for possible international travel or the ability to obtain one within the first year of hire. For individuals hired to work in California, Novolex (Pactiv Evergreen) is required by law to include a reasonable estimate of the compensation range for this role. The compensation range is specific to California and takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Novolex (Pactiv Evergreen), it is not typical for an individual to be hired at the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is Minimum: $59,900/yr. - Maximum $99,100/yr. Pactiv Evergreen is committed to a diverse and inclusive workforce. Pactiv Evergreen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age national origin, physical or mental disability, genetic information, gender identity and/or expression, marital status, veteran status or other characteristics or statuses protected by law. For individuals with disabilities who would like to request an accommodation, please call ************** or email *********************. All information will be kept confidential according to EEO guidelines and applicable laws.

About the Company HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: **************** About the Role The Service Engineer position is the primary point of contact responsible for training, installation and maintenance of all HSG tech machinery in our Chicago showcase space and equipment purchased by HSG Tech customers in the US region. Reporting directly to the Service Manager in the US, this position will manage technical issues, maintain customer satisfaction, provide monthly maintenance support, promote value add-on services and provide training support. Business travel will be a requirement for this position. Responsibilities Provide key objective management (proper machinery installation, proper accessory management and proper understanding of service data) Optimize work order organization, safe tool use and customer data reporting. Demonstrate understanding of expense reimbursement documentation and customer service evaluations Partner with internal Sales, Marketing, Finance, Customer Service and R&D teams to support stakeholder objectives On-time completion of equipment installation, commission and maintenance tasks while following the company's strict safety and quality guidelines Analyze and find root cause of maintenance impediments, debug system errors and propose system improvements. Participate and prepare company held trainings regarding technical process, company regulation and technician job duties. Conduct customer visits monthly for routine service maintenance while promoting related value add-on services. Provide one-to-one training and guidance for new hired service team members. Qualifications Two years of working experience in related industry (Fiber Laser experience highly preferred) Technical know-how: installation, debugging and maintenance on 6KW equipment Comprehension of circuit diagrams Familiar with CAD or SOLIDWORKS design software Familiar with mechanical principles Detail & deadline-oriented; well organized Excellent verbal and written communication skills Good interpersonal skills; ability to interact with staff across matrix partners Electrician's certification Fitter's certification Job level and pay is dependent on experience. Pay ranges and level progressions: Service Technician ($29-35 hourly) Service Engineer ($36-41 hourly) Senior Service Engineer ($42-48 hourly) HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National, International) Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

What this Job Entails: The Hardware Support Technician II provides procurement, inventory management, asset management, distribution and logistics services for pre-market consumer electronics across the globe. The role also provides technical assistance to ensure the products are getting shipped with the right image. The person in this role works with cutting edge technology and pre-market consumer electronics. Scope: Works on assignments that are moderately difficult, requiring judgment in resolving issues Requires some instruction on new assignments and infrequent checks on daily work Your Roles and Responsibilities: Participates with inventory and asset management including receipt and disposition of hardware Documents all defects of pre-mass production hardware and/or software Performs hardware reworks (e.g., swapping out boards/chips, removing write-protect screws, etc.) Performs software reworks (e.g., imaging devices to different builds; wipe data, rewrite system hardware ID's, etc.) Conducts servo flashing, firmware upgrade, flashing unsigned images Resolves support tickets on device issues Provides technical support during events (travel often required) Other duties as required. This list is not meant to be a comprehensive inventory of all responsibilities assigned to this position Required Qualifications/Skills: High school diploma or general education degree (GED) 2 to 5 years' related experience and/or training; or equivalent combination of education and experience IT savvy and interested in new technologies Knowledgeable about inventory, and comfortable in an IT inventory environment Capable of following technical instructions to flash drives, image devices and re-write hardware IDs Excellent communicator in both written and verbal English Ability to work in a team Ability to excel in a fast paced work environment. Ability to learn new things and adapt to a changing environment quickly Strong organization skills, and able to identify the steps to be taken to achieve objectives Preferred Qualifications: Data experience Excel experience Physical Demand & Work Environment: Must have the ability to perform office-related tasks which may include prolonged sitting or standing Must have the ability to move from place to place within an office environment Must be able to use a computer Must have the ability to communicate effectively Some positions may require occasional repetitive motion or movements of the wrists, hands, and/or fingers What can Astreya offer you? Employment in the fast-growing IT space providing you with a variety of career options Opportunity to work with some of the biggest firms in the world as part of the Astreya delivery network Introduction to new ways of working and awesome technologies Career paths to help you establish where you want to go Focus on internal promotion and internal mobility - we love to build teams from within Free 24/7 accessible Professional Development through LinkedIn Learning and other online courses to give you opportunities to upskill at your own pace Education Assistance Dedicated management to provide you with on point leadership and care Numerous on the job perks Market competitive compensation and insurance, health and wellness benefits

Build Your Career with Ashley Furniture Blaze your own path on our Manufacturing Maintenance team, where we're committed to investing in new cutting-edge technology and automation. Work with our talented and innovative team in our state-of-the-art facilities and learn what it takes to be the #1 Manufacturer of Furniture. ElectroMechanical Technician (This is a safety sensitive role) As of 2/1/2026 schedule will change to a 3-2-2-3; 7am-7pm What Will You Do? You maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What Do You Need? Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies Knowledge of programming PLC's, HMI's as well as PC based systems a plus Knowledge of working with three phase power as well as a variety of different control voltages a must. Ability to use all shop tools Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Associates Degree in Industrial Maintenance or related field, required Who We Are At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to delivering an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

Build Your Career with Ashley Furniture Blaze your own path on our Manufacturing Maintenance team, where we're committed to investing in new cutting-edge technology and automation. Work with our talented and innovative team in our state-of-the-art facilities and learn what it takes to be the #1 Manufacturer of Furniture. ElectroMechanical Technician (This is a safety sensitive role) As of 2/1/2026 schedule will change to a 3-2-2-3; 7am-7pm What Will You Do? You maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What Do You Need? Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies Knowledge of programming PLC's, HMI's as well as PC based systems a plus Knowledge of working with three phase power as well as a variety of different control voltages a must. Ability to use all shop tools Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Associates Degree in Industrial Maintenance or related field, required Who We Are At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to delivering an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

Build Your Career with Ashley Furniture Blaze your own path on our Manufacturing Maintenance team, where we're committed to investing in new cutting-edge technology and automation. Work with our talented and innovative team in our state-of-the-art facilities and learn what it takes to be the #1 Manufacturer of Furniture. ElectroMechanical Technician (This is a safety sensitive role) As of 2/1/2026 schedule will change to a 3-2-2-3; 7am-7pm What Will You Do? You maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What Do You Need? Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies Knowledge of programming PLC's, HMI's as well as PC based systems a plus Knowledge of working with three phase power as well as a variety of different control voltages a must. Ability to use all shop tools Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Associates Degree in Industrial Maintenance or related field, required Who We Are At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to delivering an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

Build Your Career with Ashley Furniture Blaze your own path on our Manufacturing Maintenance team, where we're committed to investing in new cutting-edge technology and automation. Work with our talented and innovative team in our state-of-the-art facilities and learn what it takes to be the #1 Manufacturer of Furniture. ElectroMechanical Technician (This is a safety sensitive role) As of 2/1/2026 schedule will change to a 3-2-2-3; 7am-7pm What Will You Do? You maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What Do You Need? Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies Knowledge of programming PLC's, HMI's as well as PC based systems a plus Knowledge of working with three phase power as well as a variety of different control voltages a must. Ability to use all shop tools Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Associates Degree in Industrial Maintenance or related field, required Who We Are At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to delivering an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

Our Motive Power team provides and services batteries used to power forklifts, lift trucks and more! For 100+ years, we've helped keep businesses moving. Our Techs are based out of our Greenville WI office and service the northeast Wisconsin area. Our Motive Power Service Technicians do everything from repair and maintenance of industrial batteries, chargers, and battery handling equipment, to consulting customers on cost-effective solutions, to performing maintenance and testing in our shop. In the beginning, you'll be spending a lot of time in our production warehouse learning the ins and outs of our industrial batteries. Once you've received all the training you need, you will be traveling to our customers' locations to independently service, inspect, and problem solve. Why work as a Motive Power Service Technician? Competitive compensation with raise and promotional opportunities as you go All Techs start at 3 weeks of PTO, plus holidays Medical, Dental, Vision and 401k benefits Great work-life balance Overtime available In-house training to turn you from a battery novice to a battery expert! Opportunities for career growth Local role, home every night! Qualifications What candidate are we looking for? Hard workers that aren't afraid to get their hands dirty Problem solvers that can communicate well with our customers Ability to lift 50+ pounds - our batteries are huge! Safety first individuals - whether its driving a service vehicle or working on a battery Basic mechanical and electrical abilities - we'll teach you the rest! High school diploma Anyone with experience operating a lift truck, tech training, forklift training, heavy equipment operations, or rigging experience is a plus!

Motive Power Service Technician Job Type: Full-Time Division: Motive Power Industry: Industrial Battery Systems / Field Service / Technical Support About: We are a leading provider in stored power solutions utilized by energy leaders in offshore, telecom, energy-services, utilities, oil & gas, data centers, motive power, material handling, distribution and manufacturing industries. Think of us as your team of problem solvers: listening first, then going beyond the expected to deliver the best solution for you. Why? Because we are about more than reliable power. We are about taking care of you no matter what and constantly earning your trust. Our Motive Power team provides and services batteries used to power forklifts, lift trucks and more! For 100+ years, we've helped keep businesses moving. Our Techs are based out of our Greenville WI office and service the northeast Wisconsin area. Position Overview: We're seeking a Motive Power Service Technician to join our team. This hands-on role is perfect for someone who enjoys mechanical work, solving problems, and providing excellent service to industrial customers. Key Responsibilities: Install, maintain, and repair motive power battery systems and chargers at customer sites. Conduct diagnostics and performance checks on industrial battery equipment. Perform preventative maintenance to ensure system reliability and safety. Communicate effectively with customers to explain service work and recommend solutions. Maintain accurate service records and follow safety protocols. Travel locally to customer facilities as needed. Why work as a Motive Power Service Technician? Competitive compensation with raise and promotional opportunities as you go All Techs start at 3 weeks of PTO, plus holidays Medical, Dental, Vision and 401k benefits Great work-life balance Overtime available In-house training to turn you from a battery novice to a battery expert! Opportunities for career growth Local role, home every night! Qualifications: Experience in installing, servicing, and maintaining similar manufacturing or industrial products Motive Power product experience (batteries, chargers, etc) seen as a huge plus. Mechanical aptitude and hands-on troubleshooting skills. Strong communication and customer service skills. Must pass pre-employment drug screening, background check, and DOT medical exam.

* Travel: All expenses are paid by the company. What this Job Entails: The Field Technician III will provide support to all assigned locations, including data centers and Points of Presence (POPs), and physical site services. The person in this role will coordinate with network teams as well as local vendors for installation, repair and maintenance activities. The Field Technician must have deep knowledge and professional experience deploying (physical layer) rack and stack configurations. This role requires travel. Scope: Works on assignments that require considerable judgment and initiative. Makes recommendations for solutions Works within guidelines and takes ownership of results. May act as a mentor to less experienced team members Your Roles and Responsibilities: Maintain the highest quality standards in all assigned data center locations and remote points of presence (POP). Perform physical installation, repair, maintenance, and testing activities as directed with meticulous attention to driving and maintaining the highest quality standards in the telecommunications industry. Perform card adds or replacements, software upgrades, and associated testing. Recommend improvements to processes that may impact the quality of our network assets or improve overall efficiencies for any related process or system. Provide site survey support for OSP and ISP projects, as well as large space & power and/or equipment deployments. Perform site audits and reconcile data discrepancies in coordination with Network Surveillance and other groups as necessary. Manage local construction vendors working on behalf of the company to ensure compliance with installation, repair, maintenance MOPs and standards, as well as quality and cleanliness. Meet/coordinate with Local Exchange Carrier (LEC) and other technicians to facilitate timely installation, repair, and maintenance activities as necessary. Perform site surveys in support of network builds, augments, or decommissions. Coordinate site access, equipment staging, and other tasks Adeptly leverages knowledge and expertise Other duties as required. This list is not meant to be a comprehensive inventory of all responsibilities assigned to this position Required Qualifications/Skills: Associate's degree (A.A) or equivalent from two-year college or technical school and 5+ years' related experience and/or training; or equivalent combination of education and experience Networks with senior internal and external personnel in own area of expertise Demonstrates good judgment in selecting methods and techniques for obtaining solutions Experience working with data center and POP infrastructure, including experience or deep understanding of OSP, ISP, interfacility cabling, fiber and copper distribution, AC/DC power systems, environmental controls, and relay rack/cabinet/cage construction. Experience with installing and maintaining a wide variety of telecom/network equipment, including DWDMs, backbone and management routers, IP switches, as well as all optical and digital infrastructure. Deep understanding of splicing, and an understanding of how to maintain and operate within a manhole, vault, or handhole environment. Experience with telecommunications testing equipment from microscopes and source and power meters to OTDRs and experience testing across all SONET and Ethernet bandwidths. Extensive knowledge of telecommunications testing standards and procedures from length, wire-mapping, and bit error rate to power, delay, loss, reflectance and dispersion. Experience with state and local regulatory standards, procedures, and permitting requirements. Ability to work effectively with local exchange carrier (LEC) and other telecom service provider technicians, building landlords, electricians, construction operators, and non-technical end users. Ability to work independently, diagnose problems and take appropriate action with minimal supervision. Proficiency with spreadsheets, workflow and project management applications, and administrative software applications. Experience working with a Tier-1 ITSM platform

Build Your Career with Ashley Furniture Blaze your own path on our Manufacturing Maintenance team, where we're committed to investing in new cutting-edge technology and automation. Work with our talented and innovative team in our state-of-the-art facilities and learn what it takes to be the #1 Manufacturer of Furniture. ElectroMechanical Technician (This is a safety sensitive role) As of 2/1/2026 schedule will change to a 3-2-2-3; 7am-7pm What Will You Do? You maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What Do You Need? Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies Knowledge of programming PLC's, HMI's as well as PC based systems a plus Knowledge of working with three phase power as well as a variety of different control voltages a must. Ability to use all shop tools Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Associates Degree in Industrial Maintenance or related field, required Who We Are At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to delivering an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Electromechanical Technician ***$5000 Hiring Bonus*** Charter Wire is a leading Tier 1 supplier and manufacturer of Engineered Shaped Wire, Cold Finished Bar, and Cold-Headed and Stamped Components to various industries, including Automotive, Agriculture, Construction, Consumer, Industrial, and Oil & Gas. Charter Wire is a member of the Charter Manufacturing family of companies. Why Work Here: SCHEDULE: Get a dependable 8-hour first shift, Monday-Friday, with occasional overtime. BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off. GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement-we promote from within. SAFETY: Work in an environment committed to safety and continuous improvement. STABILITY: Join an established Midwest company with four generations of family ownership. Position specifics: Location: Charter Wire - 7850 N. 81st Street, Milwaukee, WI 53222 Shift: 10:00 PM - 6:00 AM, Monday-Friday What You'll Do: As an Electromechanical Technician, you'll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment. Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices Perform preventive maintenance to reduce downtime and ensure equipment reliability Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals Collaborate with cross-functional teams to support continuous improvement Follow safety protocols and use appropriate PPE Support process improvements and participate in ongoing training What You'll Need: Technical degree in a related field, journeyman's card, or 5+ years of industrial maintenance experience Proficiency in reading complex electrical schematics and code books Broad knowledge of electrical codes, electronic controls, and electrical theory Experience with line setups, inspections, and electrical testing equipment Strong math skills (fractions, percentages) Nice to Haves: Experience with PLCs and drives (Allen Bradley, Siemens) Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems Experience with welding/torch equipment and precision measuring tools Excellent communication and teamwork skills Problem-solving mindset and eagerness to keep learning Physical Requirements: Frequent standing and walking Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs Minimal climbing and lifting over 100 lbs Ability to meet physical demands with or without reasonable accommodation Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire. We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Primary responsibilities include operations support in setup, maintenance, and operation of high-speed automatic packaging equipment. Electromechanical troubleshooting skills are required to effectively support and assist in the maintenance and operation of automated packaging equipment. Maintains a cGMP production environment and standards throughout the production area(s). Adheres to workplace environmental, health and safety (EHS) guidelines and procedures while actively promoting and enforcing adherence. Essential Duties will require a close-knit integration with various departments including Operations and Quality. ESSENTIAL DUTIES AND RESPONSIBILITES: Troubleshoot, diagnose, and repair machine breakdowns in collaboration with maintenance and engineering teams. Operate packaging equipment to support daily operational activities. Assist in training and developing new machine operators and mechanics. Record data into process check sheets. Troubleshoot and adjust sensors, online printing, barcode scanning, and OCR/OCV vision equipment. Verify the calibration status of measurement gauges, including temperature controllers, thermocouples, air and vacuum gauges, and timers. Performs Preventative and On Demand Maintenance activities, including calibration of packaging equipment, overseeing OEM support and calibration specialist personnel, and appropriately documents all activities per Sharps procedures. Maintain daily correspondence with team members and attend meetings when required. Complete preventive maintenance and on-demand work orders, logging them in the Blue Mountain system. Work hours may vary depending on business needs. Provides advanced troubleshooting including sensors, setup and adjustment of online printing, barcode scanning, and OCR/OCV vision equipment. PLC Knowledge and basic programming in structured text and ladder logic to aid in troubleshooting and diagnosis. Advanced electrical troubleshooting including controls, servos, robotics, and medium voltage control systems. Communicates complex technical issues and troubleshooting strategies both internally and externally. SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Windows Word, Excel, Outlook, and general PC literacy are essential. EDUCATION and/or EXPERIENCE: High school diploma 4 years of industrial automation/packaging experience. A strong desire to learn new systems and expand individual knowledgebase is mandatory. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to troubleshoot issues under high demand situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand, walk, reach with hands and arms, and climb or balance. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environmental characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to the risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate.