Post job

Explore jobs

Find specific jobs

Explore careers

Explore professions

Best companies

Explore companies

OverviewJobsSalaryResume

Skills

What They DoEducationCertificationsDemographicsJob DescriptionHow To HireBest CompaniesBest StatesBest CitiesJob OutlookCompareEntry Level jobsFull Time jobs
zippia ai icon

Automatically apply for jobs with Zippia

Upload your resume to get started.

Safety inspector skills for your resume and career

Updated January 8, 2025
7 min read
Quoted experts
Christine Foster,
Wesley Tinker
Safety inspector example skills
Below we've compiled a list of the most critical safety inspector skills. We ranked the top skills for safety inspectors based on the percentage of resumes they appeared on. For example, 13.0% of safety inspector resumes contained osha as a skill. Continue reading to find out what skills a safety inspector needs to be successful in the workplace.

15 safety inspector skills for your resume and career

1. OSHA

Here's how safety inspectors use osha:
  • Investigated and documented incidents using accurate and industry related terminology to protect against lawsuits and to provide OSHA with additional information.
  • Completed workshop and laboratory equipment safety for all university buildings for compliance with OSHA and other appropriate regulations.

2. Safety Procedures

Safety procedures are a set of standardized procedures, that ensures minimal to no risk to people, resources, and the work environment. A company follows the step-by-step safety procedures as it they not only keep the customers and the employees safe, but also help in avoiding legal claims.

Here's how safety inspectors use safety procedures:
  • Followed prescribed loading and safety procedures, calculated load restraints and secured cargo with appropriate devices and equipment.
  • Communicated safety procedures to employees or offered safety training to new workers.

3. Safety Inspections

Safety inspections are a vital procedure for all kinds of businesses. This may be a restaurant to ensure is properly cleaned and stored or a factory to confirm employees are not risking their safety during the manufacturing process. The goal of these inspections is to highlight any potential risks or hazards present that may lead to injuries, damages, or lawsuits.

Here's how safety inspectors use safety inspections:
  • Perform electrical safety inspections on all shipboard electrical and electronic equipment ensuring all Navy electrical regulations are followed.
  • Coordinate site safety orientation/activities with contractors and maintain a complete and up-to-date record of safety inspections.

4. Fire Protection

Here's how safety inspectors use fire protection:
  • Provided the primary first aid and fire protection for the site.
  • Inspect and maintain industrial fire protection equipment.

5. Safety Standards

Here's how safety inspectors use safety standards:
  • Worked in accident prevention, including inspecting safety conditions and providing information on safety standards and techniques.
  • Maintained quality assurance to satisfy rig safety standards.

6. Contractor Safety

Here's how safety inspectors use contractor safety:
  • Coordinated with the contractor safety management personnel, discussed concerns and regulation safety requirements during weekly safety meeting with project contractors.
  • Maintained safety hours worked on project site, safety logs involving sub-contractor safety violations and administered corrective action.

Choose from 10+ customizable safety inspector resume templates

Build a professional safety inspector resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your safety inspector resume.

7. Ladders

Here's how safety inspectors use ladders:
  • Perform inspections of fall protection equipment, ladders, decibel meter testing and respiratory fit testing.
  • Inspect fire extinguishers, ladders, and other equipment in the field of fabrication work.

8. Safety Regulations

Here's how safety inspectors use safety regulations:
  • Perform inspections and monitoring functions to assure compliance with Federal safety regulations.
  • Sound understanding of safety regulations and guidelines.

9. Safety Program

Safety programs are a series of measures to protect employees from any mishaps and make the work environment safer. Safety programs include checklists, guidelines, and direct procedures that a specific area or department must follow. Safety programs take care of office space safety, maintenance and repairs, and identification of frauds as well.

Here's how safety inspectors use safety program:
  • Deliver strong safety program implementation despite an economic downturn while boosting efficiency and lowering safety discrepancies and hazards.
  • Develop a Safety policy statement and a Construction Safety Program for the organization and submit for approval.

10. Safety Equipment

Here's how safety inspectors use safety equipment:
  • Performed field and office work for campus-wide annual inspections of laboratory safety equipment.
  • Test Phillips 66 Refinery workers on ability to operate safety equipment such as gas masks and harnesses.

11. Safety Issues

Safety issues entail any report, occurrence, violation, or action that could lead to a negative impact on the physical well-being of a person, product, or environment.

Here's how safety inspectors use safety issues:
  • Conducted safety audits and coordinated with Supervisors to resolve safety issues.
  • Communicate with drivers about safety issues and compliance

12. Corrective Action

Here's how safety inspectors use corrective action:
  • Developed & implemented electronic inspection check sheet that streamlined inspection processes and provided immediate feedback to area managers for corrective action.
  • Communicated unsafe observations to contractor supervision and followed up to ensure that corrective actions were taken.

13. EPA

The Environmental Protection Agency (EPA) is a US-based organization established to sustain and improve the environmental and human health standards across the United States. EPA was established by US President Richard Nixon by executive order in December 1970. The EPA formulates laws and releases guidelines to promote the health of individuals and the ecosystem.

Here's how safety inspectors use epa:
  • Provided senior management with impact statements on proposed DOE, EPA or other agency safety, emergency and fire protection regulations/proposals.
  • Authored corporate safety policies and programs ensuring compliance with OSHA and EPA regulatory requirements.

14. Safety Audits

A safety audit is the periodic evaluation of safety practices within an organization. Information is collected on the efficiency, effectiveness, and reliability of the entire health and safety management system of the company. Its objective is to determine whether or not an organization is complying with appropriate safety regulations and to identify weaknesses in safety programs and processes to identify corrective actions that need to be taken. Safety audits can be performed internally by supervisors and employees or by external auditors.

Here's how safety inspectors use safety audits:
  • Conduct official Safety Audits and perform walk around inspections to observe workers performing construction activities.7.
  • Conducted daily safety meetings, safety audits, and conducted incident investigations.

15. Safety Training

The guidance and skills taught to workers and employees of a company to carry out their duties safely and efficiently are referred to as safety training. The purpose of safety training is to inform workers about the potential and risks associated with this kind of work and to teach them ways to avoid such risks.

Here's how safety inspectors use safety training:
  • Developed Job Ergonomic Risk/Job Hazard Analysis, Organized and administered safety training meetings/Mentoring and coaching.
  • Perform bilingual safety training for all aspects of Safety and Environmental requirements.
top-skills

What skills help Safety Inspectors find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

What skills stand out on safety inspector resumes?

Christine Foster

Adjunct Professor, San Jose State University

From a skills perspective, I look for strong written and verbal communication skills. This includes making sure that the resume is grammatically solid and free from spelling errors. This is a first impression, and one that may make the difference between getting an interview or not. Specific experience that is important includes risk assessment/analysis, regulatory interpretation, data analysis, and project management. So much of what we do in occupational safety is assessing risk and then translating that into recommendations that are then managed to execution. Today's safety professional needs to be able to do all of these things well.

What soft skills should all safety inspectors possess?

Wesley Tinker

Assistant Professor of Safety, University of Central Missouri

In the safety profession, one must be personable and know how to read the crowd and the individual.
-A strong work ethic is a standout for anyone, but effective multi-tasking in the safety profession will set you apart.
-As noted, time management is a professional trait all must possess to be successful in almost any industry.
Handling pressure and keeping composure under stressful situations shows your professionalism and handling most tasks presented to you.
Continuous improvement objectives so that the site safety culture is always advancing toward high worker morale and management support for what the safety professional is attempting to achieve.

What hard/technical skills are most important for safety inspectors?

Wesley Tinker

Assistant Professor of Safety, University of Central Missouri

-Risk assessment skills are a must; without them, the individual will be lost.
-Ventilation and noise calculations as well as monitoring procedures.
-How to calibrate hazard monitoring equipment.
-Instructional skills. The safety professional spends a large portion of their days training workers to perform their tasks safely either in a classroom setting or individually on site.
-Ability to perform thorough accident investigations and provide preventative control measures based on causal factors found.
-Ability to quantitate values of risk versus controls as well as cost/benefit analysis.
-The technical uses for analytical techniques to break down analysis' in several different functions of the job duties.
-Able to apply OSHA requirements to specific site functions, i.e., secondary containment, hot works, and elevated working surfaces.

What safety inspector skills would you recommend for someone trying to advance their career?

Tracey Cekada

Chairperson and Professor, Safety Sciences Department, Indiana University of Pennsylvania

There are a number of things you can do to increase your earning potential when starting your career. Research through the Bureau of Labor Statistics and other resources what the state and national average salaries are for your industry. Come prepared to the negotiating table too- be able to highlight what you can offer the company. Additionally, the value that conducting co-ops and internships can provide to you when in school is invaluable. These real-world experiences not only develop your skills, but they help you to form connections that could last a lifetime. All students should be taking advantage of these opportunities.

What type of skills will young safety inspectors need?

Alfred LujanAlfred Lujan LinkedIn profile

Assistant Professor, NMSU/Dona Ana Community College

Most fire departments require or prefer candidates with a current Emergency Medical Technician-Basic license at a minimum.

Many fire departments require a minimum of a Firefighter I IFSAC or Pro Board certification, and it is a prerequisite Hazardous Materials Awareness and Operations certification.
Do you want to know more?
Read more about what experts have to say about safety inspector

List of safety inspector skills to add to your resume

The most important skills for a safety inspector resume and required skills for a safety inspector to have include:

  • OSHA
  • Safety Procedures
  • Safety Inspections
  • Fire Protection
  • Safety Standards
  • Contractor Safety
  • Ladders
  • Safety Regulations
  • Safety Program
  • Safety Equipment
  • Safety Issues
  • Corrective Action
  • EPA
  • Safety Audits
  • Safety Training
  • CFR
  • Site Safety
  • Federal Regulations
  • Inspection Reports
  • Safety Policies
  • Hazardous Materials
  • Occupational Safety
  • Construction Sites
  • Safety Violations
  • Safety Hazards
  • Fall Protection
  • Federal Laws
  • Incident Investigations
  • Food Safety
  • Safety Rules
  • Construction Projects
  • NFPA
  • Incident Reports
  • EHS
  • Safety Compliance
  • Space Entry
  • Safety Reports
  • Firefighting
  • Respiratory Protection
  • Technical Assistance
  • Respirators
  • HACCP
  • USDA
  • CPR
  • Commercial Vehicles
  • Compliance Issues
  • MSDS

Updated January 8, 2025

Zippia Research Team
Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Updated January 8, 2025

Browse healthcare practitioner and technical jobs