Safety specialist jobs in Salisbury, NC - 202 jobs

We are currently seeking an Environmental, Health and Safety Manager for our Salisbury, NC plant. EHS Manager leads the on-going assessment, development, implementation, and sustainability of the site's Safety, Health, and Environmental systems. Responsible for ensuring site's EHS system meets the objectives of corporate policies, procedures, and guidelines. Works in conjunction with management team to sustain a safety culture emphasizing employee engagement built upon Operational Excellence. Essential Job Functions: Manage environmental, health, and safety activities through strong leadership, training, communication, and motivation Guide the development and implementation of Health & Safety policies and programs. Coordinate and provide safety training for all employees in the areas of Safety, Fire Prevention, and Loss Control. Administer New Hire Orientation Safety Training. Investigate and maintain records for all work related injuries and/or illnesses, provide statistical analysis, and assist department management in the development of effective health and safety counter-measures to continuously improve safety objectives. Oversee/Administer the Worker's Compensation Program and implement an effective plan for minimizing and reducing worker injuries and associated costs in relationship to measurable data from State of North Carolina resources. Ensure legislative compliance with OSHA, EPA, ADA, RCRA, DOT, Fire Codes, and serve as a liaison with area OSHA representatives. Serve as co-chair on the Joint Health and Safety Committee and help to coordinate activities, recommendations, and accountability of issues identified by the JHSC. Conduct routine workplace safety inspections and establish measurable standards from which further recommendations (continuous improvement) can be made, with effective follow-up. Coordinate emergency evacuation procedures, training, and practice drills. Environmental Responsibilities: · Air: Manage & coordinate the Title V Air Permit(s) for the Lenoir facility. · Land: Oversee spills management program, outside storage of materials, and landfill disposal management · Water: Ensure all process water discharges to sanitary sewers is in compliance with state & federal regulations. · Hazardous Waste: Coordinate and manage hazardous waste program. Coordinate recycling efforts of all recyclable scrap. Direct services of contracted personnel. Direct management team relating to EH&S issues. Keep the HR Manager, Plant Manager and Director of EH&S up-to-date on matters relating to environmental, health and safety and other areas of human resources. Directs, promotes and reviews programs relating to safety, quality and productivity in the division and recommends changes where desirable. Performs workplace inspections and monitors compliance with all Health and Safety, ISO14001 and Corporate Health and Safety policies and procedures. Duties include, but are not limited to: leading safety talks, staff meetings, tailgate meetings, leading accident/incident investigation program, training new employees, correcting unsafe acts or conditions, and correcting or commending health and safety performance. Establish safety goals and objectives; review of safety statistics and loss runs; lead formal management safety committee. Serve as the ISO 14001 and Corporate Health and Safety Policies Management Representative. Responsible and accountable for ensuring that environmental compliance is maintained by all facility team members. Qualifications - External Qualifications, Education and Experience: Bachelor's degree in Occupational Health and Safety, Industrial Hygiene or a related field of study. Knowledge of ISO 14001, Ergonomics, and risk assessment. Minimum of five (5) years of Health, Safety, and Environmental experience, preferably in a Manufacturing (Molding/Assembly/Painting) facility. Demonstrated strength with analytical/problem solving, oral and written communication, and organizational skills. Must have a strong working knowledge of Industrial Ergonomics. Knowledge of ISO 14001, SDS and Environmental issues. Ability to ensure compliance with all environmental standards and evaluate positive and negative environmental impact on the facility. Must have a good working knowledge of Microsoft word, excel, access, & PowerPoint programs. Work Environment: The work environment characteristics described here are typical to standard office setting with moderate noise levels and high level of activity. The work will mostly be in a climate-controlled environment with occasional work in plant/manufacturing environment. Occasionally the associate may be exposed to fumes, toxic or caustic chemicals and outside weather conditions. Exposure to extreme heat or cold may be encountered. The noise level in the work environment is usually moderate to high. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally handling material up to 40 lbs. Must be able to travel from time to time including overnight, as required.

We are working with a Global Organization in Engineering, Design, and Installation of LARGE ROTATING EQUIPMENT for the HYDROPOWER GENERATION market. This is a well-established group of tenured engineers solving complex and unique problems in a growing and necessary sector of our economy. Today we are seeking a HSE Manager to lead a small team of remote Safety Professionals Situated at construction project sites and a manufacturing facility. This role will oversee the implementation of safety protocols and training as well as being the first response in any major incident investigation. Specific experience in the power generation space is ideal, construction site safety experience is required. In addition to the requisite experience and certifications, strong communication soft skills are highly valuable in this role. This person will not only be customer facing in a variety of stressful situations, but they will also be leading a diverse remote team in a process of delicate change management. Be ready to show me how you've done this in the past and what your strategy looks like. This role will oversee the proper execution of safety protocols and training as well as being the first response in any major incident investigation. What we need 4-year degree required - Engineering degree preferred Expect 50% travel to sites, a mix of planned visits and emergency response Team Leadership required; Remote team leadership preferred Experience with US Federal Government Regulations Highly preferred CSP Certification highly preferred OSHA 30 hour training preferred Construction safety experience required Hydropower background preferred

Title Safety Coordinator Hours: AM Shift Pay Rate: $55,000-$70,000 About AVL Manufacturing: AVL Manufacturing is a global leader in advanced manufacturing solutions, specializing in the design and production of high-quality industrial and engineered systems. With a strong focus on innovation, safety, and continuous improvement, AVL is expanding its manufacturing operations in Charlotte, NC, and is seeking skilled professionals who want to grow with a stable, long-term organization. At AVL, the mantra “We Are One Team” is lived every day. Employees are valued for their hands-on expertise, commitment to safety, and their ability to contribute meaningfully to a collaborative and supportive manufacturing environment. Arrow Workforce Solutions is the exclusive staffing partner supporting hiring for this role with AVL Manufacturing. Job Summary: The EHS Coordinator will support the Health & Safety Specialist in implementing and maintaining workplace safety programs, compliance documentation, and training initiatives. This role is essential for ensuring a safe and compliant work environment through inspections, recordkeeping, and administrative support. Key Responsibilities: Conduct routine workplace inspections and complete checklist documentation under the direction of the H&S Specialist. Document findings for equipment and work areas; track and follow up on corrective actions from audits and inspections. Assist with maintaining compliance records and regulatory documentation. Schedule and coordinate employee training sessions; audit and maintain training logs and certifications. Support logistics for new hire orientations. Monitor PPE and safety supply inventory; initiate replenishment as needed. Coordinate delivery, receipt, and distribution of safety equipment and PPE. Ensure spill kits and other safety stations are fully stocked and functional. Assist in implementing established H&S programs and procedures developed by the H&S Specialist. Help organize safety meetings and toolbox talks. Maintain organized H&S files, logs, and documentation. Prepare basic communications such as training reminders and safety notices. Assist with contractor visits and inspections. Provide general administrative support to improve efficiency and responsiveness of the H&S function. Qualifications: High school diploma or equivalent (Associate or Bachelor's degree in Safety, Environmental Science, or related field preferred). 1-3 years of experience in EHS or related administrative role. Knowledge of OSHA regulations and workplace safety standards (preferred). Strong organizational skills and attention to detail. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint). Excellent communication and interpersonal skills. Bi-lingual (preferred) Basic computer skills and ability to input data into interfaces. Good mechanical aptitude and attention to detail. Ability to lift up to 50 lbs and work on your feet for extended periods. Commitment to safety, quality, and continuous improvement. Preferred Certifications: OSHA 10/30 Hour Certification First Aid/CPR Certification .

Required Skills & Experience 7+ years of Construction 5+ years of Data Center 5+ years of Safety Management 5+ OSHA 30 Nice to Have Skills & Experience • Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Occupational Health and Safety Technologist (OHST), Construction Health and Safety Technologist (CHST) or other recognized industry professional certification. • Excellent verbal and written communication skills, with experience engaging and influencing cross-functional stakeholders and executives. • Experience developing and implementing organizational frameworks, standards, and processes. • Experience designing and deploying global health and safety programs. • Experience delivering cross functional programs, including ownership, and driving results. • Mission Critical project delivery • Spanish language proficiency Job Description Insight Global is seeking an experienced Data Center Construction Manager to work a long-term contract opportunity supporting their Cloud Operations team. This team is the engine that powers all the cloud services. As a Construction Area Safety Manager, you will perform a key role in delivering the core infrastructure and foundation technologies for online services including The Cloud Operations + Innovation business is critical to delivering on this mission and vision, building and operating cloud infrastructure, which is growing rapidly in response to unprecedented demand for services. CO+I operate one of the largest cloud networks on the planet -- comprised of more than 160 Datacenters, 130+ edge sites, 2+ million miles of fiber, and millions of servers and network and storage devices. The Environmental, Health, and Safety (EHS) team is seeking a Construction Area Safety Manager with the passion to drive value across complex supplier relationships and demonstrated experience in supplier management. Proficient analytical skills, using data to design processes that scale, effective collaboration across internal and external stakeholders, and the drive to continuously improve and achieve business objectives will be critical to success in this role. Pay is between 50-60/hr

Job Title: Safety Specialist Classification : Exempt, Fulltime The Safety Specialist is responsible for developing, implementing, and overseeing workplace health and safety programs to ensure compliance with federal, state, and local regulations.This role ensures the organization fosters a safe work environment by conducting risk assessments, training employees on safety practices, investigating incidents, and implementing corrective actions to reduce hazards and improve safety performance. Essential Job Duties and Responsibilities: Develop, implement, and monitor comprehensive safety policies and procedures, and programs. Work with local, state, and federal agencies including OSHA to ensure compliance with all regulations and policies for health and safety standards. Plan and direct monthly safety training topics, safety onboarding including GHS training for new hires, and other safety-related training as required for all employees. Conduct regular safety audits, inspections, and risk assessments throughout the facility. Investigate and document accidents, incidents, and near misses, and recommend corrective and preventive measures. Analyze incident data and trends to implement proactive safety measures. Lead safety training programs and provide education to employees on workplace hazards, emergency procedures and safe work practices. Collaborate with management and employees to promote a strong safety culture. Develop and coordinate emergency response plans, including fire drills and evacuation procedures. Serve as liaison with regulatory agencies and insurance providers. Collaborate with outside contractors to schedule monthly, quarterly, annual inspections, and service to safety systems as needed. Other duties, as assigned. Required Education and Experience Associate degree in safety related field and/or equivalent experience Proven experience in industrial safety management preferably in manufacturing. Strong knowledge of OSHA, EPA, and other safety regulations. Excellent communication, training, and interpersonal skills. Analytical and critical thinking skills with attention to detail. Proficient in Microsoft Office Suite. Commitment to promote a culture of safety and continuous improvement. AAP/EEO Statement All recruiting, hiring, training, promotion, compensation, and other employment related decisions are provided fairly to all persons on an equal opportunity basis without regard to race, creed, color, religion, sex, age, national origin, disability, veteran status, or any other characteristic protected by law. Other Duties Please note this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Environmental Health and Safety Manager serves as the safety expert for DeZURIK's Gastonia, North Carolina site, developing and directing the implementation of programs necessary to develop a proactive safety culture. This role also helps manage a comprehensive safety system that controls cost and risk and focuses on cultural improvements with leading and lagging indicators as the driving metric. This role has a behavior-based safety focus on complete trust and cooperation between the leaders and team members. The Environmental Health and Safety Manager is an environmental steward for the site, ensuring all environmental compliance is within Federal, State, County, and City regulatory requirements. PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS) * Analyze and identify common safety/health hazards inherent in the organization's operations, and establish processes and procedures for protection from those hazards. * Identifies applicable regulatory requirements and establishes procedures for their implementation. * Acts as environmental liaison with third-party contractors to ensure county, state, and federal requirements. Ensures compliance and facilitates decreasing the environmental footprint. * Audits safety programs for compliance with company standards, government regulations, and unique local conditions. * Partners with the Director of EHS to monitor periodic performance reports for trends and conditions, and alert appropriate management to correct problem areas. * Partner with third-party vendors to ensure all environmental compliance. * Leads investigation of major accidents/incidents/hazards/near misses, recommends future preventive measures, and ensures implementation through problem-solving techniques. * Responsible for OSHA logs, First Reports of Injury, and partners with HR on Workers' Compensation claims at corporate location. * Reviews new products, equipment, and processes for potential hazards and recommends modifications before introduction. * Works with team members and supervisors to identify and correct potential safety and health hazards. * Develop safe standard work practices with line personnel and monitor conformance through safety and housekeeping inspections. * Provide feedback to support plant engineering to assist with implementing engineering controls to minimize safety and occupational health hazards. * Conduct ergonomics studies to ensure the proper tooling and layout of the process. * Serves as Emergency Response Coordinator, managing emergency procedures and organizing emergency teams during an event. * Partners with the Operations Team for utilization of the safety LMS system. Communicate trends, gaps, and planned annual training requirements. * Ensures thorough investigation and accountability that the Safety Accountability Policy is upheld after completed root cause analysis. EDUCATION AND EXPERIENCE Required: * Bachelor's degree in Occupational Safety, or related degree or equivalent combination of experience and education. * Experience with and understanding of safety operations in a metal manufacturing organization. Preferred: * Experience in a lean manufacturing environment. * Certified Safety Professional (CSP) desired. * Experience with musculoskeletal/ergonomics. * Experience with problem-solving skills. KNOWLEDGE, SKILLS AND ABILITIES * Strong situational analysis skills to identify problems and solutions. * Polished group and interpersonal communication skills, both written and verbal. * PC skills: spreadsheet and word processing skills adequate to produce necessary work documents. * Ability to lead, motivate and influence. * Workers compensation management. * Ability to develop and implement safety programs. * Ability to create and maintain record keeping in compliance with all company and regulatory agencies. * Able to set high standards and get results. PHYSICAL DEMANDS * Physical demands are typical of an office position including extended periods of sitting, extensive use of a personal computer and telephone. * Position requires movement around the facilities. * Occasional handling of material and components. WORKING CONDITIONS Normal manufacturing and office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron and boots). Must have the ability to support extended business hours to meet customer business needs. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every team member shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All team members have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. SALARY AND BENEFITS DeZURIK offers a competitive base salary in the $84,058 to $105,072 range, based on experience and qualifications, along with annual bonus opportunities tied to performance. Beyond pay, our market-leading benefits are designed to support your wellbeing. These include medical, dental, vision, and life insurance, as well as short- and long-term disability coverage. DeZURIK also provides a health savings account with company match, a retirement plan for employer contributions through Vanguard, and access to the Granite Assistance Fund for support when it's needed most. We value time for rest and personal growth, offering generous paid time off, including volunteer time off and paid holidays. DeZURIK, Inc. is an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. #LI-JW1

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary A Project HSE Manager is an integral member of a project team and they are highly dedicated to the health and well-being of others. In addition to serving as a safety resource for their teammates, their main function is to facilitate Sundt HS&E programs. This position includes three 'steps' (I, II and Sr.), which provide for a progression of skill and experience. Step I is the entry level for individuals with a short experience in safety and they typically report to another Project HSE Manager. Individuals in step II have the capability of managing small to medium size/complexity projects on their own. Sr Project HSE Managers have several years of experience and the ability to manage larger and more complex projects. Key Responsibilities 1. Conducts frequent safety walks/inspections of the project and adjacent property. 2. Conducts site-specific safety orientations. 3. Creates, updates, maintains, and facilitates the Project Environmental Management Plan. 4. Creates, updates, maintains, and facilitates the Project Safety Management Plan. 5. Facilitates the Sundt Safety Management and Illness Prevention Systems Manual on the project. 6. Manages emergencies, incidents, and worker's compensation claims. 7. Reviews and files project safety documentation. Minimum Job Requirements 1. Certifications and licenses: Preferred, but not required- STSC, CHST, ASP, CSP. 2. Education: high school diploma minimum, bachelor's degree preferred. 3. Experience: At least one year of full-time project safety experience. 4. Good written and verbal communication (proper grammar, spelling, etc. 5. High level of integrity for reporting incidents and events, as well as upholding company policy, personal activities, etc. 6. Proficient use of all Microsoft Office Suite programs. 7. Special skills: able to use various computer software and apps proficiently, bi-lingual preferred . Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices to communicate with internal and external customers or vendors. 5. Must be able to comply with all safety standards and procedures. 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis. 8. Will interact with people frequently during a shift/work day. 9. Will lift, push or pull objects on an occasional basis. 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

**About M.C. Dean** M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. **Why Join Us?** Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. **Position Summary:** The Safety Professional is responsible for oversight of Construction Project Safety, Health (S&H), and Risk Management, effectively managing multiple Safety programs, developing and implementing M.C. Dean site-specific project safety plans, and collaborating with Project Management in the implementation and leadership of the Operational Risk Management (ORM) process. Provides solutions to a wide range of difficult problems. Solutions are imaginative, thorough and practical. 20% Travel. Responsibilities **Responsibilities:** + Coordinate with General Contractor (GC) and/or owner of general site conditions and/or Non-Compliance Notice (NCN) + Participate in meetings with customers, project team members, and contractors/sub-contractors to advise of project-specific mitigation plans, S&H training programs, and technical reports + Assist with the development and implementation of Site Specific Accident Prevention Programs (APP) and training plans to meet project safety plan specs and requirements + Assist with site safety budgets, necessary safe work permits and assure compliance with project contract, plans, and specifications + Lead the Operational Risk Management (ORM) team in reviewing, interpreting, and developing a project safety plan based on project, client/owner, Program Manager, and General Contractor (GC) specifications, design drawings, regulations, and existing safety system - Conduct / assist with incident / investigation reporting. + Knowledge of safety and health standards, rules, regulations - Working knowledge of safe work practices, accident investigation techniques, Occupational Safety & Health Administration (OSHA), U.S. Department of Transportation (DOT) compliance, insurance audits, workers compensation, project health surveys, Activity Hazard Analysis (AHA), site emergency evacuation and first aid plans + Proficiency in Microsoft (MS) Office suite, including Share Point Qualifications **Position / Candidate Requirements:** + 0+ years with a Bachelors Degree + Experience conducting S&H training, Regulatory compliance expert/1910, 1926, EM-385 1-1 + Safety Management Systems knowledge, skill and experience + ANSI-Z10, OHSAS 18001, ISO 3100 + Understanding of culture and culture building skills + Trainer Designation - OSHA 500/502 - Safety and Health / Occupational Safety degree from an ABET accredited program + Willingness to pursue Associate Safety Professional (ASP), Certified Safety Professional (CSP), Construction Health and Safety Technician (CHST) + Previous electrical / construction / industrial /federal and commercial S&H experience + Knowledge and understanding of Safety Requirements and Regulations **We offer an excellent benefits package including:** + A competitive salary + Medical, dental, vision, life, and disability insurance + Paid time off + Tuition reimbursement + 401k Retirement Plan + Military Reserve pay offset + Paid maternity leave **Possible work locations:** + Charlotte, NC + Atlanta, GA + Monroe, LA + Frederick, MD + Austin, TX + Dallas, TX + Boydton, VA + Leesburg, VA + Manassas, VA + Richmond, VA **Abilities:** + Exposure to computer screens for an extended period of time. + Sitting for extended periods of time. + Reach by extending hands or arms in any direction. + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. + Listen to and understand information and ideas presented through spoken words and sentences. + Communicate information and ideas in speaking so others will understand. + Read and understand information and ideas presented in writing. + Apply general rules to specific problems to produce answers that make sense. + Identify and understand the speech of another person.

Pharmacovigilance & Drug Safety Specialist (PharmD) Bring your clinical lens to the world of drug safety and reporting. Key Responsibilities: Analyze adverse event reports and clinical trial safety data. Prepare regulatory submissions (e.g., MedWatch, PSURs). Collaborate with medical affairs and clinical teams to address safety signals. Qualifications: PharmD with strong understanding of pharmacology. Prior experience in drug safety or clinical data review is a plus. Detail-oriented with excellent written communication. Why Join Us? Remote or hybrid options Pharma industry training provided Clear career path into global drug safety

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The HSE Manager is responsible for assisting in the overall supervision and administration of safety for Business Unit projects to maintain a safe and healthy work environment for all employees. Managing project safety efforts to prevent accidents and injuries while communicating details of safety conditions to the HSE Director and various levels of Business Unit supervision. Responsibilities Serves as primary point of contact for HSE related policies/practices within assigned region and project sites Oversees regional HSE professionals and provides consistent leadership, direction, and motivation in line with company HSE strategy and vision (if applicable) Provides HSE subject matter leadership and direction to project leaders (i.e. Superintendent, Forman, etc.) to drive consistent implementation of HSE policies and practices Conducts project site assessments to improve effectiveness of HSE policy and practices implementation, employee behaviors, and subcontractor performance and compliance. Documents findings, proposes corrective actions, and communicates results to stakeholders Participates in developing and conducting field safety orientation Observes workers to determine appropriate use of prescribed safety equipment such as glasses helmets goggles, respirators, and clothing. Inspection of specified areas for fire-prevention equipment, first-aid supplies, and other safety Tests working areas for hazard exposures (noise, toxic, ) using associated testing equipment. Investigation of accidents per program procedures to establish root cause for use in recommending preventive safety measures. Documenting all accidents, safety violations, unsafe conditions or behavior Assisting in development of standardized job safety analysis (JSA), corporate safety and health management program (SHMP), as well as project specific safety plans (PSSP). Conducts safety meetings with workers to instruct them on company/project safety practices and requirements. Demonstrates use of equipment and conduct safety training Qualifications Required Education, Experience, and Qualifications Bachelor's degree in Occupational Health and Safety or a related technical field. 7 years of previous construction experience. 1 year of previous experience as on-site safety person. OSHA Outreach Trainer. First Aid, CPR, and AED Trainer. Working knowledge of government regulations, hazard control methods, and industrial hygiene. Demonstrated ability to conduct training and influence organizational behavior. Effective verbal and written communication skills. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Versed in the industry and the Company's competitors. Ability to multitask and perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications BCSP certification(s): CSP, ASP, GSP, OHST, CHST Travel Requirements 25-60% of time will be spent traveling to job site(s)/office location. Physical/Work Environment Requirements Prolonged periods of sitting at a desk and working on a computer. Climbing stairs. Remaining in a stationary position, often kneeling, standing or sitting for prolonged periods. Repeating motions that may include the wrists, hands and/or fingers. Quiet environment. Light work that includes adjusting and/or moving objects up to 20 pounds. #LI-CG1 ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

Job Description Job Title Job Reports To (Manager's Title) Site Safety & Health Officer (SSHO) Program Manager Department Job Grade Compensation Operations Status Post date Close date ☐ Exempt ☒ Non-Exempt ☒ Full-Time ☐ Part-Time 10/22/2025 Position Summary: The Site Safety & Health Officer (SSHO) will serve as the primary authority for planning, implementing, and enforcing the Contractor's Safety and Health Program under this potential contract supporting the 81st Readiness Division (RD). This position ensures all operational, maintenance, and environmental activities are conducted in strict compliance with federal, state, and local safety standards requirements. The SSHO works collaboratively with the Program Manager (PM) and Quality Control Manager (QCM) to promote a unified safety and quality culture, perform enterprise-level risk assessments, and ensure consistent reporting and compliance across all 81st RD sites. This position is contingent upon contract award and is for a possible contract. Duties and Responsibilities: Develop, implement, and enforce the Contractor's Safety and Health Program in accordance with contract requirements and applicable regulations. Ensure compliance with OSHA, EM 385-1-1, AR 420-1, and EO 14057 sustainability and environmental directives. Conduct daily safety inspections, hazard analyses, and risk assessments for all ongoing site activities. Prepare, maintain, and update all required Safety Plans, Accident Prevention Plans (APPs), and other safety documentation. Provide regular safety briefings, toolbox talks, and safety-related training for all project personnel and subcontractors. Investigate all incidents, accidents, and near-miss events, ensuring root-cause analysis and corrective action implementation. Maintain complete and accurate safety records, including logs, inspection reports, and incident summaries, for government review. Coordinate closely with the PM and QCM to integrate safety performance into quality control and operational objectives. Conduct enterprise-level trend analysis to identify risks and develop preventive measures across all supported sites. Promote a strong, proactive safety culture emphasizing continuous improvement and employee engagement in safety initiatives. Required Qualifications: Must have a minimum of 3 years of satisfactory experience in preparing and enforcing a Contractor's safety program on contracts of similar size, scope, and complexity within the past. Must have successfully completed the 30-hour OSHA Safety Class or equivalent within the last three (3) years. Must pass a background screen Preferred Qualifications: Dedicated safety professional certified in OSHA-30 and EM 385-1-1 compliance. Advanced training in Behavior-Based Safety (BBS), AR 420-1 sustainability, and Executive Order (EO) 14057 environmental compliance. Experience performing enterprise-level risk assessments and implementing preventive safety programs across multiple project locations. Strong knowledge of federal safety management systems and Army Reserve environmental and occupational health programs. Demonstrated ability to develop and lead proactive, data-driven safety initiatives that reduce risk and enhance organizational culture. Excellent communication, documentation, and analytical skills with proven success in coordinating with PM and QCM for integrated safety-quality management. Pay: Negotiable Location: 81st Readiness Division Charlotte, NC Concord, NC Cary, NC Garner, NC McLeansville, NC Winterville, NC High Point, NC Lumberton, NC Morehead City, NC Rocky Mount, NC Salisbury, NC Wilson, NC Winston-Salem, NC Wilmington, NC Knightdale, NC Florence, SC Myrtle Beach, SC Physical and Technical Environment: Prolonged periods of sitting at a desk and working on a computer. · Must be able to lift to 40 pounds at a time. · Must be able to travel to offsite assignments. Benefits: 401(k) Dental insurance Health insurance Life insurance Vision insurance Vacation Time Sick Time (The right is reserved under provisions PL 93-638 Section (b), (f), (g), (i), 20 USD450 Indian Self Determination and Education Assistance Act of 1974 to give PREFERENCE AND OPPORTUNITY for employment, training, and contracts to Indians)

Job Title Job Reports To (Manager's Title) Site Safety & Health Officer (SSHO) Program Manager Department Job Grade Compensation Operations Status Post date Close date ☐ Exempt ☒ Non-Exempt ☒ Full-Time ☐ Part-Time 10/22/2025 Position Summary: The Site Safety & Health Officer (SSHO) will serve as the primary authority for planning, implementing, and enforcing the Contractor's Safety and Health Program under this potential contract supporting the 81st Readiness Division (RD). This position ensures all operational, maintenance, and environmental activities are conducted in strict compliance with federal, state, and local safety standards requirements. The SSHO works collaboratively with the Program Manager (PM) and Quality Control Manager (QCM) to promote a unified safety and quality culture, perform enterprise-level risk assessments, and ensure consistent reporting and compliance across all 81st RD sites. This position is contingent upon contract award and is for a possible contract. Duties and Responsibilities: Develop, implement, and enforce the Contractor's Safety and Health Program in accordance with contract requirements and applicable regulations. Ensure compliance with OSHA, EM 385-1-1, AR 420-1, and EO 14057 sustainability and environmental directives. Conduct daily safety inspections, hazard analyses, and risk assessments for all ongoing site activities. Prepare, maintain, and update all required Safety Plans, Accident Prevention Plans (APPs), and other safety documentation. Provide regular safety briefings, toolbox talks, and safety-related training for all project personnel and subcontractors. Investigate all incidents, accidents, and near-miss events, ensuring root-cause analysis and corrective action implementation. Maintain complete and accurate safety records, including logs, inspection reports, and incident summaries, for government review. Coordinate closely with the PM and QCM to integrate safety performance into quality control and operational objectives. Conduct enterprise-level trend analysis to identify risks and develop preventive measures across all supported sites. Promote a strong, proactive safety culture emphasizing continuous improvement and employee engagement in safety initiatives. Required Qualifications: Must have a minimum of 3 years of satisfactory experience in preparing and enforcing a Contractor's safety program on contracts of similar size, scope, and complexity within the past. Must have successfully completed the 30-hour OSHA Safety Class or equivalent within the last three (3) years. Must pass a background screen Preferred Qualifications: Dedicated safety professional certified in OSHA-30 and EM 385-1-1 compliance. Advanced training in Behavior-Based Safety (BBS), AR 420-1 sustainability, and Executive Order (EO) 14057 environmental compliance. Experience performing enterprise-level risk assessments and implementing preventive safety programs across multiple project locations. Strong knowledge of federal safety management systems and Army Reserve environmental and occupational health programs. Demonstrated ability to develop and lead proactive, data-driven safety initiatives that reduce risk and enhance organizational culture. Excellent communication, documentation, and analytical skills with proven success in coordinating with PM and QCM for integrated safety-quality management. Pay: Negotiable Location: 81 st Readiness Division Charlotte, NC Concord, NC Cary, NC Garner, NC McLeansville, NC Winterville, NC High Point, NC Lumberton, NC Morehead City, NC Rocky Mount, NC Salisbury, NC Wilson, NC Winston-Salem, NC Wilmington, NC Knightdale, NC Florence, SC Myrtle Beach, SC Physical and Technical Environment: Prolonged periods of sitting at a desk and working on a computer. · Must be able to lift to 40 pounds at a time. · Must be able to travel to offsite assignments. Benefits: 401(k) Dental insurance Health insurance Life insurance Vision insurance Vacation Time Sick Time (The right is reserved under provisions PL 93-638 Section (b), (f), (g), (i), 20 USD450 Indian Self Determination and Education Assistance Act of 1974 to give PREFERENCE AND OPPORTUNITY for employment, training, and contracts to Indians)

Are you looking for a Challenge? Looking for an innovative organization and the opportunity to learn and grow professionally? We can help! We are seeking a Site Safety and Health Officer (SSHO) (USACE 81st RD Facility Investment Services - Region F: North Carolina and South Carolina). The SSHO is a key position responsible for developing, implementing, and enforcing the Contractor's Safety and Health Program under the Facility Investment Services (Region F) contract. The SSHO ensures full compliance with EM 385-1-1, OSHA, and all safety provisions in the Performance Work Statement (PWS). This role includes preparing and maintaining the Accident Prevention Plan (APP), conducting inspections, identifying hazards, implementing corrective actions, and documenting all safety activities. The SSHO works closely with the Project Manager and Quality Control Manager to maintain a safe work environment and protect personnel, property, and mission readiness. This is a full-time, on-site position at Charlotte, NC (serving Army Reserve sites across North and South Carolina). The position must maintain availability by phone within one hour during and after government working hours. An alternative location can be agreed upon with the candidate. I've never heard of Terrestris. What do you do? At Terrestris, we leverage technology to create better mission outcomes through better human performance. We form strong client and team relationships through transparency and strive to create an environment where our team can let their excellence shine through. By finding, developing, and incorporating new ideas, we provide memorable services. Rooted in the USMC values of honor, courage, and commitment, Terrestris seeks to deliver extraordinary value to the American people by helping the Government become more efficient and effective. So, what will the Site Safety and Health Officer at Terrestris do? The SSHO is responsible for developing, enforcing, and maintaining the Contractor Safety Program and all required safety plans (APP, AHAs, hazard-specific plans). The position ensures compliance with EM 385-1-1, OSHA, and conducts conducting inspections, investigations, and training. The SSHO maintains safety records and documentation. This position coordinates with Government personnel and enforces corrective actions to maintain a safe workplace. What does a typical day look like for a Site Safety and Health Officer? You will: Develop, implement, and enforce the Contractor's Safety and Health Program in full compliance with EM 385-1-1, OSHA, and all Performance Work Statement (PWS) safety requirements. Prepare and maintain the Accident Prevention Plan (APP), ensuring safe work practices, hazard identification, emergency response procedures, and employee compliance with approved safety protocols. Develop and update Activity Hazard Analyses (AHAs) for all recurring and non-recurring tasks, identifying hazards, assessing risks, and defining control measures before work begins. Prepare, implement, and maintain hazard-specific safety plans such as Asbestos Abatement, Fall Protection, Fire Prevention, and Confined Space Entry, as required by the PWS. Conduct regular safety inspections of all worksites, equipment, and operations, documenting findings and ensuring prompt correction of unsafe conditions or practices. Ensure all personnel complete required safety training, including OSHA-10 minimum certification, and maintain accurate records of completed courses and current qualifications. Investigate and report all accidents, near-miss incidents, and property damage, determining root causes and submitting formal reports and corrective actions to the COR. Monitor and control hazardous materials, ensuring labeling, handling, storage, and disposal comply with OSHA Hazard Communication standards and environmental protection requirements. Maintain complete and accurate safety documentation, including inspection reports, training logs, AHAs, and incident records, available for Government review during normal working hours. Ensure proper use and maintenance of personal protective equipment (PPE) and safety devices, verifying compliance with established standards and replacement of defective gear. Coordinate safety compliance with security and environmental program requirements to protect personnel, property, and the environment during all contract activities. Participate in safety meetings, audits, and inspections with Government safety representatives, providing requested documentation and implementing required follow-up actions. Exercise authority to stop work immediately when unsafe conditions exist and direct immediate corrective measures before operations resume. Promote and maintain a proactive culture of safety awareness, ensuring continuous improvement in accident prevention, hazard communication, and workforce protection across all contract sites. You might be the professional we're looking for if you have: Minimum of three (3) years of satisfactory experience preparing and enforcing safety programs on contracts of similar size and complexity. Must have completed the OSHA 30-hour Safety Course (or equivalent) within the last three years. Must be fully familiar with the U.S. Army Corps of Engineers Safety and Occupational Health Requirements Manual (EM 385-1-1) and all applicable OSHA regulations. Proven track record performing SSHO responsibilities. These include at minimum: Develop, implement, and enforce the Contractor's Safety Program and the Accident Prevention Plan (APP). Prepare, maintain, and enforce an APP that meets EM 385-1-1 standards and addresses site-specific hazards. Develop and maintain AHAs for all recurring and non-recurring work, ensuring review and approval prior to task execution. Prepare and enforce required plans including Fall Protection, Fire Prevention, Hazard Communication, Confined Space Entry, Lockout/Tagout, and Asbestos/Lead Abatement. Conducts regular safety inspections of worksites, operations, and equipment; identifies hazards; enforces immediate corrective action. Accident reporting and investigation. Manage staff completion of 10-hour OSHA safety training. Maintains safety documentation, inspection records, accident reports, and training logs, ensuring all are available for Government review. Oversee proper labeling, handling, and storage of hazardous materials and maintains Safety Data Sheets (SDSs). Verifies use and maintenance of required PPE and ensures compliance with EM 385-1-1 and OSHA standards. Judiciously deploy stop-work authorities when unsafe conditions exist and direct correction prior to resuming. Exceptional teamwork and ability to coordinate with the Project Manager (PM) and Quality Control Manager (QCM) to ensure integrated compliance with safety and quality requirements. The SSHO must be eligible for base access through a completed background investigation and, if required, obtain a Common Access Card; no classified clearance is required. Must be authorized to work in the United States. What kind of benefits does Terrestris Offer? We offer outstanding benefits including health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, and work-life programs. Our award programs acknowledge employees for exceptional performance and superior demonstration of our service standards. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in our benefit programs. Other offerings may be provided for employees not within this category. Terrestris is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. Applicants must be authorized to work in the U.S. DILBERT © 2018 Scott Adams. Used By permission of ANDREWS MCMEEL SYNDICATION. All rights reserved.

Magnera's purpose is to better the world with new possibilities made real. For more than 160 years, the originating companies have delivered the material solutions their partners need to thrive. Through economic upheaval, global pandemics and changing end-user needs, they have consistently found ways to solve problems and exceed expectations. By bringing together these legacy companies, the distinct scale and comprehensive portfolio of products will bring customers more materials and choices. With a combined legacy of resilience, Magnera will build personal partnerships that withstand an ever-changing world. The Environmental, Health & Safety (EHS) Manager Leads Environmental, Health, and Safety programs. Facilitates and supports relevant training, engagement, stewardship, sustainability, key metrics, and compliance activities for the site. Partners with site leadership in creating an organizational culture that places a high emphasis on safety beliefs, values, and attitudes. Drive continuous improvement toward protecting site employees, reducing corporate risks, and reducing potential adverse impacts on the environment and community. Responsibilities Develop and oversee implementation of actions to facilitate a strong safety culture through high leadership and employee engagement. Provide guidance and support/coach facility leadership on safety, health and environmental aspects of operations Plan and manage programs to educate and train employees on workplace safety practices, fire prevention, and correct handling techniques for chemicals, toxins, equipment, and other materials. Maintain company's database and all other safety and environmental-related records in accordance with all governmental, state, local, and company requirements. Ensure compliance with all pertinent governmental agency and Glatfelter requirements, programs, and regulations Oversee, evaluate and continuously improve facility safety initiatives to ensure compliance with all applicable standards and to build a strong safety culture. Oversee annual safety plan development and monitor/drive progress with Site Leadership Team. Support safety committee and plant safety project work teams led by line leadership. Monitor department audits and task based observations to assure they are conducted with rigor and intensity and that findings are reviewed and proper corrective actions are taken. Coach site leadership to be safety champions and live safety as a value integrated into the way the site operates. Employ proactive approach to managing workplace safety and accident prevention by utilizing Job Hazard Analysis, accident analysis, inspections and safety education and training. Ownership and oversight of initiatives and programs to ensure compliance and increase awareness. Key programs include: Powered Industrial Trucks, New Driver Certification, Incident Investigations, Emergency and Severe Weather Response Programs, Machine Guarding, Lock-out/Tag-out, Confined Space, Fall Protection, Fire Prevention Has knowledge of diverse health effects, illnesses, and accidents associate with specific job functions; works with department business partner within the organization to identify, be aware of, and bring action to safety concerns. Oversee the administration of workers' compensation program, including working with the insurance carrier to reduce employee lost time and work with health care provider to ensure balanced care. Partner with HR to ensure proper case management and employee well being. Responsible for preparing and submitting accident and other regulatory required reports (OSHA, EPA, etc.) Responsible for maintaining and updating safety records, SOP's and written programs. Demonstrate a Continuous Improvement mindset through participation in events and activities that lead to culture development, financial gain, time savings, and/or waste reduction for the business. Respond to incidents/emergencies on-site and provide necessary support. Lead accident/incident investigations and ensure robust corrective actions are developed and implemented Performs other duties as assigned. Qualifications BS degree in EHS/Occupational Safety or related field. CHST or CSP strongly preferred. Minimum of 5 years of environmental and safety experience in a high-volume manufacturing operation. Knowledge of OSHA regulations, hazard identification and corrections, environmental regulations, workers compensation and human behavior and physical attributes related to job capabilities. Strong organizational skills, ability to work independently and collaborate to achieve deliverables. Knowledge of Microsoft Office, HRIS systems and other safety related electronic platforms required for reporting and tracking Lean and/or Six Sigma experience a plus

The Safety Coordinator plays a critical role in ensuring the safety of thousands of team members on our jobsites each day. Whether working in general construction or one of our affiliate companies, you'll work alongside Clark leaders to advance our policies, programs, and procedures governing safe work practices and promote our 24/7 culture of care. Implementing safe working practices and ensuring the well-being of everyone is a core value of Clark. Safety coordinators are responsible for assisting in the administration of Clark's Safety, Health and Environmental program to ensure a safe and healthy environment for Clark employees, trade contractors, and the surrounding community. Responsibilities Promote corporate and project-specific safety and health programs as well as federal, state, and local safety standards. Attend required training. Help promote a positive safety culture through coaching and educating to Clark employees and trade contractors on occupation health and safety requirements. Identify potential hazards and provide immediate input, advice, and direction to mitigate hazardous conditions and assure compliance. Conduct site-walks and report project-specific safety performance and future plans. Working closely with field supervision to plan complex safety aspects of the project construction, including critical lifts, hazardous material handling, fire prevention, and evacuation. Ensure all incidents are investigated thoroughly and reported timely. Educate yourself on Clark's policies and other regulatory requirements. Cultivate a network of industry relationships to bring potential business opportunities to Clark leadership. Cultivate industry relationships to help attract and recruit top talent to Clark. A mindset of "All team members are recruiters". Exceed our stakeholders' expectations by anticipating their needs, desires, and goals. Basic Qualifications 0 - 2 years of relevant construction safety experience with an undergraduate degree in safety and health (or related discipline) or demonstrated construction safety and trade experience. Passion and interest in the construction industry. Preferred Qualifications Commitment to safety and the ability to anticipate and solve problems, manage risk, and analyze project needs to deliver high-quality outcomes. Ability to build interpersonal relationships with internal team members and trade partners. OSHA 10 or OSHA 30 trained preferred. Strong written and verbal communication skills. The work environment and requirements described below are representative of those necessary for an employee to successfully perform the essential functions of this role. The Physical Side of the Role: This is an active, hands-on role. You can expect to be on your feet frequently, navigating active job sites with uneven terrain, stairs, ladders, and hoists. The work is physically demanding and requires a full range of motion, including bending, kneeling, and reaching. You'll need to be comfortable frequently lifting and carrying materials up to 25 pounds, and occasionally up to 50 pounds. This role requires the ability to communicate effectively, as well as visual acuity for reading plans and inspecting work. The role does include desk time in the office that may require prolonged periods of sitting for tasks like computer work, document review, and meetings. Your Work Environment: You'll spend a significant amount of your time on active construction sites, which means being adaptable to all kinds of weather and moderate to loud noise levels, and comfortable in elevated or confined work areas with moving mechanical equipment and with the fast-paced nature of a project in progress. You will also spend time in a typical office setting with moderate noise levels. Your safety is our top priority, and you'll be expected to follow Clark Construction's safety policies and procedures, and all applicable laws, at all locations. Our High-Performing Culture: This is a demanding, high-performance environment. We are looking for candidates who are energized by challenge, thrive under pressure, and are prepared to do what it takes to achieve exceptional results. Success in this role requires significant commitment, including flexibility to work extended hours, especially during critical project phases or client deadlines. Beyond regular working hours, there will be occasions where business needs require your attention, particularly for time-sensitive matters or emergencies. You are expected to monitor and respond to communications (phone calls, emails, text messages) as required to address these situations effectively. Your ability to manage these expectations and be responsive when critical issues arise is key to your success in this role and our collective success as a team. A Drug Free Workplace: Clark promotes a drug free workplace. A pre-employment drug “fitness for duty” screening is required, and the company conducts random quarterly drug “fitness for duty” tests.

QUALIFICATIONS: A. EDUCATION AND EXPERIENCE High School Diploma or equivalent. . Must be able to use critical thinking process to assess, analyze, and reach optimal conclusions. Should have computer skills, be resourceful and be able to communicate effectively using written and verbal methods. Must be able to self-manage. Must be reliable. Must be able and willing to work shifts, including extended hours and be subject to 'on-call" responses during off hours to accomplish tasks and goals. Must be performing satisfactorily in present position. Must have a current AOA ATL badge. Must have a valid driver's license with "D" on badge and be able to drive all G2 vehicles safely. B. PERSONAL AND PHYSICAL REQUIREMENTS Treat all information as confidential. Possess the tact to deal with all levels of employees and client representatives. Must be able to sit, stand, lift, and/or bend throughout shift. Must be able to lift, carry, and/or hold up to 10 lbs. Must pass drug test. Must meet necessary requirements to obtain a security sensitive identification badge. Must be a citizen of the United States or possess the necessary authorization from the Immigration and Naturalization Service (INS). PERFORMANCE RESPONSIBILITIES: Responsible for organizing teams and ensuring efficient and smooth daily operation. Act as a Safety advocate and promote "Safety First!" mindset by ensuring compliance with all Safety policies and procedures in all areas of the operation. Help to prevent OJIs by detecting and correcting unsafe work practices. Responsible for conducting daily audits on all shifts to ensure reliable, proficient and effective cabin service performance. Promote team building and perform coaching/mentoring to develop and motivate team members (Leads). Assist Management team whenever needed. Provide and set the example for the delivery of distinctive customer service. Establish and manage performance audit results. Ensure information is communicated in a clear, concise and comprehensive manner. Ensure compliance with rules and standards of G2 Secure Staff, United Airlines and all relevant regulatory agencies. Comply with all safety requirements to include only using equipment that you have been trained on, immediately reporting unsafe conditions and workplace injuries, wearing proper PPE, and attending required safety training Ensure implementation of the Safety Management System (SMS) Implement safety plan for station Maintain Quality Assurance oversight for operational issues relating to performance and safety, providing suitable corrective and/or preventative actions where necessary Actively participate in the Safety Management System

Job Description Job Title Job Reports To (Manager's Title) Site Safety & Health Officer (SSHO) Program Manager Department Job Grade Compensation Operations Status Post date Close date ☐ Exempt ☒ Non-Exempt ☒ Full-Time ☐ Part-Time 10/22/2025 Position Summary: The Site Safety & Health Officer (SSHO) will serve as the primary authority for planning, implementing, and enforcing the Contractor's Safety and Health Program under this potential contract supporting the 81st Readiness Division (RD). This position ensures all operational, maintenance, and environmental activities are conducted in strict compliance with federal, state, and local safety standards requirements. The SSHO works collaboratively with the Program Manager (PM) and Quality Control Manager (QCM) to promote a unified safety and quality culture, perform enterprise-level risk assessments, and ensure consistent reporting and compliance across all 81st RD sites. This position is contingent upon contract award and is for a possible contract. Duties and Responsibilities: Develop, implement, and enforce the Contractor's Safety and Health Program in accordance with contract requirements and applicable regulations. Ensure compliance with OSHA, EM 385-1-1, AR 420-1, and EO 14057 sustainability and environmental directives. Conduct daily safety inspections, hazard analyses, and risk assessments for all ongoing site activities. Prepare, maintain, and update all required Safety Plans, Accident Prevention Plans (APPs), and other safety documentation. Provide regular safety briefings, toolbox talks, and safety-related training for all project personnel and subcontractors. Investigate all incidents, accidents, and near-miss events, ensuring root-cause analysis and corrective action implementation. Maintain complete and accurate safety records, including logs, inspection reports, and incident summaries, for government review. Coordinate closely with the PM and QCM to integrate safety performance into quality control and operational objectives. Conduct enterprise-level trend analysis to identify risks and develop preventive measures across all supported sites. Promote a strong, proactive safety culture emphasizing continuous improvement and employee engagement in safety initiatives. Required Qualifications: Must have a minimum of 3 years of satisfactory experience in preparing and enforcing a Contractor's safety program on contracts of similar size, scope, and complexity within the past. Must have successfully completed the 30-hour OSHA Safety Class or equivalent within the last three (3) years. Must pass a background screen Preferred Qualifications: Dedicated safety professional certified in OSHA-30 and EM 385-1-1 compliance. Advanced training in Behavior-Based Safety (BBS), AR 420-1 sustainability, and Executive Order (EO) 14057 environmental compliance. Experience performing enterprise-level risk assessments and implementing preventive safety programs across multiple project locations. Strong knowledge of federal safety management systems and Army Reserve environmental and occupational health programs. Demonstrated ability to develop and lead proactive, data-driven safety initiatives that reduce risk and enhance organizational culture. Excellent communication, documentation, and analytical skills with proven success in coordinating with PM and QCM for integrated safety-quality management. Pay: Negotiable Location: 81st Readiness Division Charlotte, NC Concord, NC Cary, NC Garner, NC McLeansville, NC Winterville, NC High Point, NC Lumberton, NC Morehead City, NC Rocky Mount, NC Salisbury, NC Wilson, NC Winston-Salem, NC Wilmington, NC Knightdale, NC Florence, SC Myrtle Beach, SC Physical and Technical Environment: Prolonged periods of sitting at a desk and working on a computer. · Must be able to lift to 40 pounds at a time. · Must be able to travel to offsite assignments. Benefits: 401(k) Dental insurance Health insurance Life insurance Vision insurance Vacation Time Sick Time (The right is reserved under provisions PL 93-638 Section (b), (f), (g), (i), 20 USD450 Indian Self Determination and Education Assistance Act of 1974 to give PREFERENCE AND OPPORTUNITY for employment, training, and contracts to Indians)

The Safety Coordinator plays a critical role in ensuring the safety of thousands of team members on our jobsites each day. Whether working in general construction or one of our affiliate companies, you'll work alongside Clark leaders to advance our policies, programs, and procedures governing safe work practices and promote our 24/7 culture of care. Implementing safe working practices and ensuring the well-being of everyone is a core value of Clark. Safety coordinators are responsible for assisting in the administration of Clark's Safety, Health and Environmental program to ensure a safe and healthy environment for Clark employees, trade contractors, and the surrounding community. Responsibilities * Promote corporate and project-specific safety and health programs as well as federal, state, and local safety standards. * Attend required training. * Help promote a positive safety culture through coaching and educating to Clark employees and trade contractors on occupation health and safety requirements. * Identify potential hazards and provide immediate input, advice, and direction to mitigate hazardous conditions and assure compliance. * Conduct site-walks and report project-specific safety performance and future plans. * Working closely with field supervision to plan complex safety aspects of the project construction, including critical lifts, hazardous material handling, fire prevention, and evacuation. * Ensure all incidents are investigated thoroughly and reported timely. * Educate yourself on Clark's policies and other regulatory requirements. * Cultivate a network of industry relationships to bring potential business opportunities to Clark leadership. * Cultivate industry relationships to help attract and recruit top talent to Clark. A mindset of "All team members are recruiters". * Exceed our stakeholders' expectations by anticipating their needs, desires, and goals. Basic Qualifications * 0 - 2 years of relevant construction safety experience with an undergraduate degree in safety and health (or related discipline) or demonstrated construction safety and trade experience. * Passion and interest in the construction industry. Preferred Qualifications * Commitment to safety and the ability to anticipate and solve problems, manage risk, and analyze project needs to deliver high-quality outcomes. * Ability to build interpersonal relationships with internal team members and trade partners. * OSHA 10 or OSHA 30 trained preferred. * Strong written and verbal communication skills. The work environment and requirements described below are representative of those necessary for an employee to successfully perform the essential functions of this role. The Physical Side of the Role: This is an active, hands-on role. You can expect to be on your feet frequently, navigating active job sites with uneven terrain, stairs, ladders, and hoists. The work is physically demanding and requires a full range of motion, including bending, kneeling, and reaching. You'll need to be comfortable frequently lifting and carrying materials up to 25 pounds, and occasionally up to 50 pounds. This role requires the ability to communicate effectively, as well as visual acuity for reading plans and inspecting work. The role does include desk time in the office that may require prolonged periods of sitting for tasks like computer work, document review, and meetings. Your Work Environment: You'll spend a significant amount of your time on active construction sites, which means being adaptable to all kinds of weather and moderate to loud noise levels, and comfortable in elevated or confined work areas with moving mechanical equipment and with the fast-paced nature of a project in progress. You will also spend time in a typical office setting with moderate noise levels. Your safety is our top priority, and you'll be expected to follow Clark Construction's safety policies and procedures, and all applicable laws, at all locations. Our High-Performing Culture: This is a demanding, high-performance environment. We are looking for candidates who are energized by challenge, thrive under pressure, and are prepared to do what it takes to achieve exceptional results. Success in this role requires significant commitment, including flexibility to work extended hours, especially during critical project phases or client deadlines. Beyond regular working hours, there will be occasions where business needs require your attention, particularly for time-sensitive matters or emergencies. You are expected to monitor and respond to communications (phone calls, emails, text messages) as required to address these situations effectively. Your ability to manage these expectations and be responsive when critical issues arise is key to your success in this role and our collective success as a team. A Drug Free Workplace: Clark promotes a drug free workplace. A pre-employment drug "fitness for duty" screening is required, and the company conducts random quarterly drug "fitness for duty" tests.

Magnera's purpose is to better the world with new possibilities made real. The EHS Manager ensures the safety and security of everyone who enters the site. Lead all safety improvement processes for the plant in alignment with the safety mission statement. Provide professional knowledge and expertise in administering and supporting environmental health and safety programs. Oversee the overall coordination and implementation of these programs, along with sustainability efforts, to ensure compliance with regulatory agency guidelines and institutional policies. Responsibilities JOB DUTIES & RESPONSIBILITIES: Drive awareness and accountability for environmental, health and safety performance through all levels of the site. Champion employee empowerment to identify and address safety concerns, and generate new ideas related to safety and health. Promote and participate in employee involvement programs such as project teams, committees, and internal training. Lead plant incident and plant non-conformance investigations, determine appropriate corrective actions and preventative actions, and ensure closure of actions. Reapply key learnings and recommendations from global incidents as applicable. Lead emergency preparedness planning and response activities. Lead internal and external inspections of the facility to assess and ensure compliance with federal, state, local, insurance and internal safety requirements Maintain ISO compliant safety and environmental compliance records, including OSHA Logs and Permit Requirements. Develop, create, track, and deliver safety training to employees as required, including coordination of new hire and external regulatory training. Lead the development, review, approval, interpretation and implementation of safety rules, programs, orders, policies, standards, guides and documents. Identify and communicate EHS issues to plant management, contractor management and other stakeholders. Assist in the resolution of issues. Champion employee empowerment to identify and address safety concerns, and generate new ideas related to safety and health. Develop, implement and sustain plant employee involvement programs such as project teams, committees, and internal training. Create and maintain reporting mechanisms for site level sustainability efforts and results. Coordinate with the HR Dept. to improve and sustain employee morale and safety ownership. Provide immediate first aid and coordinate with health care providers for injuries Lead plant and/or department level EHS audits, self-assessments and inspections Ensure relevant safety and environmental compliance records are maintained for completeness and verify accuracy of records. Obtain data and analyze injury/illness and safety non-conformance trends. Use data to establish action plans and goals for improvement. Lead and ensure required documentation for emergency preparedness planning and response activities. Conduct safety training or verify training delivery by qualified individuals Conduct and/or coordinate internal and external inspections of the facility to assess and ensure compliance with federal, state, local, insurance and internal safety requirements. Ensure closure of identified non-conformances. Effectively interact with all internal functional job levels and with external agencies and resources to maximize the effectiveness of the safety improvement process. Coordinate with and assists management regarding ergonomics, job safety analyses, incident investigations, and employee suggestions. Maintain, post and distribute safety and environmental performance charts. Analyze incident statistics to identify trends and establish necessary precautions and changes needed. Assist in the management of worker's compensation cases. Maintain and increase professional knowledge and expertise related to the fields of environmental protection, occupational health, and industrial safety through annual professional development. Other duties as assigned. Qualifications EDUCATION & EXPERIENCE: Bachelor's degree in related field or an equivalent combination of related training, education and experience, required. (Occupational Safety, Industrial Hygiene, Fire Protection, Environmental Science, Engineering) Certified Safety Professional (CSP) or other safety certification, preferred. Six Sigma certification preferred (green or black belt). Minimum 5 years of experience in Environmental, Industrial Hygiene, Occupational Health and/or Safety experience in a manufacturing environment COMPETENCIES: Knowledge of safety, industry hygiene and environmental testing methods Strong incident investigation, root cause analysis and continuous improvement skills Strong leadership, communication, influencing and collaborative skills Strong organizational skills with proven ability to complete multiple tasks simultaneously. Computer literacy: Power Point, Word, Excel, Teams WORKING CONDITIONS: Job functions will be performed in and around production lines, warehouses, silos', pumping stations. Outside weather conditions may affect the temperature in the plant. EFFORT/PHYSICAL DEMANDS: Requires prolonged sitting and frequent bending, stooping and stretching, manual dexterity. The ability to occasional lift and carry of up to 50 pounds. Required to occasionally ascend and descend up to three flights of stairs over extremely fast-moving machinery. Required to safely access fast moving machinery, which includes rolls with inward nip points. You must wear PPE (which includes a vest, safety glasses, ear plugs, steel-toe shoes, bump-caps, gloves as appropriate) as directed. Ability to work outside normal scheduled working hours when needed in a 24/7/365 operation.