Saw Operator Resume Examples 2023

Research Summary. We analyzed 2,774 saw operator resumes to determine which ones land the most jobs. Below you'll find examples of resumes that can help you get an interview (and a job offer) from companies like 48forty Solutions and Tyson Foods. Here are the key facts about saw operator resumes to help you get the job:

  • The average saw operator resume is 219 words long
  • The average saw operator resume is 0.5 pages long based on 450 words per page.
  • Tape measure is the most common skill found on a saw operator resume. It appears on 14.9% of resumes.
After learning about how to write a professional saw operator resume, you can make sure your resume checks all the boxes with our resume builder.

Resume

Saw Operator Resume Example

 
Noah Hayes
Saw Operator
Contact Information
Milwaukee, WI
(600) 555-5253
Skills
  • Safety Guidelines
  • Automotive Parts
  • Different Departments
  • Production Process
  • Dishes
  • Quality Specifications
  • Forklifts
  • Esab
  • Quality Standards
  • Heavy Equipment
Employment History
Saw Operator
2020 - Present
Patrick Cudahy
Milwaukee, WI
  • Ensured raw materials are properly prepared for shipping & receiving and stored properly.
  • Performed shut down, pre-start inspections, pre-startup, and start up on production equipment.
  • Operate stamp and punch press, Operate Trumpf cutting laser Operate forklift shipping and receiving
Machine Operator
2018 - 2020
ManpowerGroup
Milwaukee, WI
  • Scan labels, place labels on boxes, then place boxes on assembly line.
  • Molded and machined plastic parts via sonic welders and heat stakes
  • Assemble product containers and crates, using hand tools and precut lumber.
  • Operated very old acme screw machines to produce nuts and bolts.
  • Operate machines, inspect parts, complete paper work, pack parts, keep work space clean.
Wrapper
2017 - 2018
Bed Bath & Beyond
Totowa, NJ
  • Use RF scanner to scan each item.
  • Used RF scanner to scan labels on boxes that need to be picked.
  • Answered phones in a timely Assisted main baker in all areas of the bakery Maintained high standards of customer service
Education
High School Diploma
2017 - 2017
 
 
Nancy Phillips
Saw Operator
Contact Info
Mishawaka, IN
(320) 555-6024
Skills
General MaintenanceWater PlantsCar PartsActivity LogsGISRegular BasisPayrollAgricultural WorkerCustomer SpecificationsHand Tools
Employment History
Saw Operator
2019 - Present
Lippert Components
Mishawaka, IN
  • Run aluminum bar into saw, cut to desired length and then take to drill and drills holes in them.
  • Cut mental for strom doors on a saw, using tape measure .
  • Used Pallet Jacks to move inventory
  • Machine operator/Assembler Brake press Punch Press and CNC
  • Operate a manual Punch Press Machine
  • Ford car parts (rearview mirrors/side panels) Packing Taping Inspecting
Saw Operator
2016 - 2019
Forge Industrial Staffing
Mishawaka, IN
  • weld Operator/Inspect Machine Operator, Welder Operator, Inspect Parts, Production
  • Perform quality checks to assure product is to required specifications.
  • Produced car parts in Body Components Department at Aisin U.S.A.
  • Operate Clamp Truck / Fork Lift Operate Die Cutter / Inspect Parts Package goods / Stack pallets
  • Assisted the assembly line efficiently.
  • Operate plastic car parts machine, inspect and pack.
Field Worker
2013 - 2016
Forge Industrial Staffing
Mishawaka, IN
  • Received multiple assembly line job assignments.
  • Packaged car parts to be shipped to the three; operated machinery; assembled car parts; operated forklifts.
  • Worked in packaging, on an assembly line, learned how to pay attention to detail.
  • Take steel parts to hang on industrial racks as they come down assembly line
  • Work on assembly line putting together different types of equipment.
  • Operated machines * Responsible for working on an assembly line * Responsible for making car parts for Nissan
Education
High School Diploma
2013 - 2013
 
 
Marilyn Miller
Saw Operator
McDonough, GA
mmiller@example.com
(720) 555-7750
Experience
Saw Operator
2018 - Present
Briggs & StrattonMcDonough, GA
  • Performed routine set-ups and adjusted machines to maintain tolerances and reset, re-started, and performed minor adjustments to production equipment.
  • Operated large band saws and forklift.Job included inventory of product in the plant, and gluing of parts.
Rip Saw Operator
2013 - 2018
Briggs & StrattonMcDonough, GA
  • Cut Aluminum according to specifications with documented production leader for 4 years.
  • Provide accurate and timely communication to co-workers.
Installation Assistant (Part-Time)
2012 - 2013
ToddMarion, IN
  • Install, support, and maintains PC applications in a Windows based Active Directory environment.
  • Perform installation gas furnace, air conditioning, heat pumps, flexible tubing and sheet metal construction.
  • Sell, install, maintain and troubleshoot Digital Satellite Systems, wireless internet systems and cellular phones.
  • Installed DIRECTV systems, did service calls, troubleshooter for customers.
  • Utilized Microsoft Office and Internet Explorer for daily operations via computer, phone, or other electronic tracking devices.
Skills
Proper Length
Quality Checks
Hand Tools
Material Thickness
Multiple Machines
Band Saws
Manual Tools
New Units
Forklifts
Small Parts
Education
Certificate Business
2012 - 2013
Indiana Wesleyan UniversityMarion, IN
 
Create My Resume
Build a professional resume in minutes.

How your resume should look:

  • The job title on your resume should match your application for the role.
  • Ensure your work experience focuses on achievements, rather than responsibilities.
  • Recruiters and hiring managers suggest fitting your resume on one page.

Choose From 10+ Customizable Saw Operator Resume templates

Zippia allows you to choose from different easy-to-use Saw Operator templates, and provides you with expert advice. Using the templates, you can rest assured that the structure and format of your Saw Operator resume is top notch. Choose a template with the colors, fonts & text sizes that are appropriate for your industry.

Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume
Saw Operator Resume

Saw Operator Resume Format And Sections

1

1. Add Contact Information To Your Saw Operator Resume

Your name should be the biggest text on the page and be at or near the top of the document.

Your address doesn't need to include your street name or house number - listing your city and state works just fine.

Your email address should be professional, but not your current work email address. It's not a good look to use your work email for personal projects (job-searching).

Your social media can be included if you have a fully-fledged LinkedIn page or another social media page that showcases your relevant skill set.

Saw Operator Resume Contact Information Example #1

Dhruv Johnson

d.johnson@email.com | 333-111-2222 | www.linkedin.com/in/dhruv-johnson

Do you want to know more?
How To Write The Perfect Resume Header
2

2. Add Your Relevant Education To The Resume

Your resume's education section should include:

  • The name of your school
  • The date you graduated (Month, Year or Year are both appropriate)
  • The name of your degree
If you graduated more than 15 years ago, you should consider dropping your graduation date to avoid age discrimination.

Optional subsections for your education section include:

  • Academic awards (Dean's List, Latin honors, etc. )
  • GPA (if you're a recent graduate and your GPA was 3.5+)
  • Extra certifications
  • Academic projects (thesis, dissertation, etc.)

Other tips to consider when writing your education section include:

  • If you're a recent graduate, you might opt to place your education section above your experience section
  • The more work experience you get, the shorter your education section should be
  • List your education in reverse chronological order, with your most recent and high-ranking degrees first
  • If you haven't graduated yet, you can include "Expected graduation date" to the entry for that school
Check More About Saw Operator Education
Majors
Business
19.0%
General Studies
15.0%
Precision Metal Working
8.4%
Criminal Justice
7.4%
Show More

Saw Operator Resume Relevant Education Example #1

High School Diploma 2017 - 2019

Saw Operator Resume Relevant Education Example #2

High School Diploma 2011 - 2013

3

3. Next, Create A Saw Operator Skills Section On Your Resume

Your resume's skills section should include the most important keywords from the job description, as long as you actually have those skills. If you haven't started your job search yet, you can look over resumes to get an idea of what skills are the most important.

Here are some tips to keep in mind when writing your resume's skills section:

  • Include 6-12 skills, in bullet point form
  • List mostly hard skills; soft skills are hard to test
  • Emphasize the skills that are most important for the job
Hard skills are generally more important to hiring managers because they relate to on-the-job knowledge and specific experience with a certain technology or process.

Soft skills are also valuable, as they're highly transferable and make you a great person to work alongside, but they're impossible to prove on a resume.

Example Of Saw Operator Skills For Resume

  • Tape Measure Skills

    A tape measure is a thin, flexible strip of plastic or metal that can be rolled up when it is not being used. The tape measure has numbers marked on it linearly which is used for measuring length.

  • Aluminum Skills

    Aluminum is the most common nonferrous metal and the most prevalent metallic material in the Earth's crust. Aluminum is never found in its metallic form in nature, but its compounds can be found in varying degrees in nearly all minerals, vegetation, and animals. Cans, foils, cooking utensils, door frames, kegs, and aeroplane pieces are all made of aluminum.

  • Safety Procedures Skills

    Safety procedures are a set of standardized procedures, that ensures minimal to no risk to people, resources, and the work environment. A company follows the step-by-step safety procedures as it they not only keep the customers and the employees safe, but also help in avoiding legal claims.

  • CNC Skills

    CNC stands for Computer Numerical Control. It is a subtractive manufacturing technique that usually uses computerized controls and machine tools to strip layers of material from a stock piece.

  • Overhead Cranes Skills

    Overhead cranes are major industrial equipment used for lifting heavy objects, loads, and tools from one location to another in construction sites. Operating an overhead crane takes much expertise, experience, and skill, as there is no ''one size, fits all''. Overhead cranes come in different components for different specific functions.

  • Band Saws Skills

    A band saw is used to cut wood materials into different curves, lines, and forms to complete various tasks or projects. A band saw is typically long and sharp, containing toothed metal components that help cut materials smoothly and precisely. Additionally, a band saw can be dangerous to use, which requires a woodworker to be careful and proactive when operating them.

  • Stainless Steel Skills

    Stainless steel is an alloy of iron, chromium, carbon, and some other metals with corrosion-resistant properties. The components of steel include less than 1% carbon, 1% manganese, and small quantities of other elements such as phosphorus, silicon, sulfur, and oxygen. Iron and carbon are the two essential components of steel. Stainless steel is resistant to tarnishing and rust.

Top Skills for a Saw Operator

Source: Zippia.com
  • Tape Measure, 14.9%
  • Hand Tools, 9.7%
  • Basic Math, 8.5%
  • Math, 7.8%
  • Other Skills, 59.1%
Not sure which skills are really important?
3 Big Tips For Listing Skills On Your Resume
4

4. List Your Saw Operator Experience

The most important part of any resume is the experience section. Recruiters and hiring managers expect to see your experience listed in reverse chronological order, meaning that you should begin with your most recent experience and then work backwards.

Don't just list your job duties below each job entry. Instead, make sure most of your bullet points discuss impressive achievements from your past positions. Whenever you can, use numbers to contextualize your accomplishments for the hiring manager reading your resume.

It's okay if you can't include exact percentages or dollar figures. There's a big difference even between saying "Managed a team of engineers" and "Managed a team of 6 engineers over a 9-month project."

Most importantly, make sure that the experience you include is relevant to the job you're applying for. Use the job description to ensure that each bullet point on your resume is appropriate and helpful.

Don't have any experience?
How To Show Your Experience On a Resume... Even When You Don't Have Any
Work History Example # 1
Door Builder
Universal Forest Products
  • Assembled instruments for measurement using precision tools following company's department procedures and blueprints.
  • Followed procedures and instructions by using blueprints to properly build air conditioners and fire/smoke alarms
  • Constructed buildings and installed products such as windows, doors, air vents, and roofing materials.
  • Developed knowledge of inventory systems and shipping procedures.
  • Used various tools including table saws, sanders, and routers.
Work History Example # 2
Machine Operator
The Coca-Cola Company
  • Monitored usage of utilities to ensure efficiency of operation and accompanied GMP auditors.
  • Moved product in the production area using single and double forklifts in a safe and efficient pattern.
  • Assisted with maintaining and troubleshooting equipment along production line.
  • Supervised and monitored team performance.
  • Configured and operated screw-machines with partial CNC capabilities.
Work History Example # 3
Saw Operator
Kelly Services
  • Monitored equipment operations and meter readings, notified line supervisor of malfunctions, marked and tagged equipment for repair.
  • Stacked cargo in locations such as transit sheds or in holds of ships as directed, using forklifts.
  • Operated CMM machine Certified cell support operator Inspected product for imperfections Expedited routers & detail reports
  • Used CNC tools and have adequate knowledge and use of SAP program.
  • Adhered to all SOPS, cGMPs, plant safety, and documentation systems requirements Cleaned equipment and work area.
Work History Example # 4
Operator
Hydro-Gear
  • Operated a CNC mill making various automotive parts while meeting company expectations
  • Resulted in annualized logistics savings of $4 million and $1.4 million respectively.
  • Completed all safety standards and regulations according to OSHA standards
  • Trained as EMS First Responder and certified also annually trained on Fire Brigade, Rescue and Hazmat at College station facility.
  • Loaded/unloaded sterilization chambers with product using forklifts.
5

5. Highlight Your Saw Operator Certifications On Resume

Certifications can be a powerful tool to show employers that you know your stuff. If you have any of these certifications, make sure to put them on your saw operator resume:

  1. OSHA Safety Certificate
  2. EPA Amusement Operators Safety Certification (EPA)
  3. Operator Certification
  4. Certified Manufacturing Specialist (CMS)
  5. Master Engine Machinist

More Certifications For Saw Operator
6

6. Finally, Add a Saw Operator Resume Summary Or Objective Statement

A resume summary statement is a 1-3 sentence spiel at the top of your resume that quickly summarizes who you are and what you have to offer. In this section, include your job title, years of experience (if it's 3+), and an impressive accomplishment, if you have space for it.

Remember to address skills and experiences that are emphasized in the job description.

Are you a recent grad?
Read our guide on how to write a resume summary statement

And If You’re Looking for a Job, Here Are the Five Top Employers Hiring Now:

  1. Cargill Jobs (19)
  2. Lippert Components Jobs (30)
  3. Sonoco Jobs (17)
  4. UFP Industries Jobs (61)
  5. JELD-WEN Jobs (44)

Common Saw Operator Resume Skills

  • Tape Measure
  • Hand Tools
  • Basic Math
  • Math
  • Aluminum
  • Safety Procedures
  • CNC
  • Overhead Cranes
  • Band Saws
  • Verifies Dimensions
  • Machine Operation
  • Power Saws
  • Routine Maintenance
  • Stainless Steel
  • Safety Standards
  • Customer Specifications
  • Customer Orders
  • Safety Regulations
  • Oiling
  • Pallet Jack
  • Machine Shop
  • Load Trucks
  • Mathematics
  • Quality Standards
  • Structural Steel
  • Perform Routine Maintenance
  • Extrusion
  • Tow Motor
  • MIG
  • Quality Checks
  • Assembly Line
  • Drill Press
  • Sawing Machines
  • ISO
  • Order Specifications
  • Torches
  • Blade Tensions
  • Forklift Operation
  • Horizontal Band Saws
  • Carbon Steel
  • Inventory Control
  • Reference Lines
  • Window Frames
  • Fork Trucks
  • Concrete Saws
  • Production Schedules
  • Forklift Training
  • Safety Guidelines
  • Radial Arm
  • Hoists

Saw Operator Jobs

Links To Help Optimize Saw Operator Resumes

Saw Operator Related Resumes

Saw Operator Related Careers

Saw Operator Related Jobs

What Similar Roles Do

Updated May 19, 2023