Quality Technician jobs at Schlumberger - 168 jobs

The Composite Fabricator II works closely with engineering staff, technicians, and vendors/suppliers in the fabrication of tooling, structures, and components utilizing a variety of materials. Responsibilities Follows design drawing instructions and written process instructions Works with Engineering in performing fabrication and assembly tasks as well as resolving tooling issues Works with and fabricates tooling, fixtures, jigs, etc. from one or more materials Operates hand/power tools (e.g., jitterbug, dotco) for cutting or trimming, as required Works with materials to perform bonding/curing (e.g., thermal plastic, rubber, resins, adhesives) in the experimental layup process, as required. Uses precision measuring tools (e.g., calipers, scales, micrometers) to check work performed Adheres to all safety requirements Works on assignments that are semi-routine in nature, following established procedures on routine work Applies acquired job skills and company policies & procedures to complete assigned tasks under minimal supervision Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required Minimum 1 - 2 years hands-on composite fabrication experience or equivalent combination of experience and education Demonstrated knowledge of layup processes Demonstrated knowledge in using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.) Experienced in reading and interpreting blueprints and drawings Demonstrated computer proficiency and ability to download work instructions, as applicable Experienced using hand/power tools (i.e. jitterbug, dotco) Preferred Qualifications (Desired Skills & Experience) Demonstrates competency in calculation of math dimensions working with sample parts, sketches and/or verbal instructions for fabricating details, as required Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Physical Demands Ability to work in a R&D and Production environment (Constant) Must be able to lift and carry objects of varying sizes and shapes up to and between 10 lbs. (Frequently) and 20 lbs. (Occasional) Requires ability to perform the following: reaching, handling, turning/twisting, lifting/lowering, stooping, kneeling, crouching, squatting, crawling, contact with metals and composites, exposure to moving parts and tools, pinch points, sharp cutters and slipping hazards, noise and atmospheric conditions, and the use of personal safety gear for face/eye, respiration, ears and feet. (Frequent) May require working from high/exposed places, tight spaces and work from ladders (Occasional) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $19 - $27 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency.

The Quality Technician III supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms Leads & facilitates problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Plans and coordinates QA Technician I and II activities and provides general guidance Support DCMA Source Inspection process Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system Develops and maintains process instructions for quality-related activities Works on assignments that are moderately difficult, requiring judgement in resolving issues or in making recommendations Other duties as assigned Basic Qualifications (Required Skills & Experience) High School Diploma or GED equivalent 2 - 4 years of related work experience is required or equivalent combination of education, training, and experience Has Aerospace quality management system experience (AS9100DD) and/or internal audit experience Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) Must be able to fill out the necessary flight test documentation Must document any/all non-conformances encountered Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results Must have a valid California driver's license and clean driving record Other Qualifications & Desired Competencies 2-year technical degree preferred; Quality system courses and/or equivalent experience preferred Must able to work efficiently in a fast-paced, high-volume environment Required to travel to and from remote flying sites on a daily basis Solid ability to accurately record and manage data, records, files and other documents to support tasks Good knowledge of FAI validation and verification process requirements Good knowledge of engineering drawings and specification systems Has an analytical approach to problem solving and high organizational skills in a fast-paced environment as well as effective time management, interpersonal and communication skills Strong ability to manage time and prioritize tasks Receives little instruction on daily work, general instructions on newly introduced assignments. Has substantial understanding of the job and applies knowledge & skills to complete wide range of tasks Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Has effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests Willingness to work overtime also a must Physical Demands Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level The salary range for this role is: $26 - $37 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency.

The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required Final assembly of ground control equipment and air vehicles Testing and troubleshooting of subassemblies and final assemblies Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed May also train other technicians to build a product or follow an established assembly process May conduct in-process quality checks to ensure that items built are to established high quality standards Follows established procedures on routine work and may require instruction on new assignments Maintains a clean and safe work environment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required or equivalent combination of education, training, and experience Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required Ability to read blueprints and schematics is desired Ability to solder as part of assembly function and duties Must have good manual dexterity and basic computer operation skills Must have strong oral and written communication skills to communicate effectively with employees in the Company Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies Vocational training in Electronics or Solder Certification is preferred Versed in Lean Manufacturing methodologies is desired Familiarity with Safety and ESD practices is desired Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in a manufacturing environment Ability to frequently use hand tools (e.g. clamps) using light, minimal force Regularly required to sit for long periods and occasionally stand for short periods Frequently lift and/or carry objects of small size between 2lbs and 5lbs Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance Occasionally required to walk Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

This role is designed for Second Shift. The Quality Technician I supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities * Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks * Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database * Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers * Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms * Support DCMA Source Inspection process * Coordinates with Shipping and Contracts department as needed to ensure timely delivery * Also will assist flight test operators as necessary * Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection * Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system * Works on assignments that are routine in nature, requiring limited judgment * Other duties as assigned Basic Qualifications (Required Skills & Experience) * High School Diploma or GED equivalent is required * 0 - 1 years of related work experience or equivalent combination of education, training, and experience * Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred * Demonstrated knowledge in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. * Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 * Possesses basic knowledge of engineering drawings and specification systems * Basic knowledge of FAI validation and verification process requirements * Basic knowledge of engineering drawings and specification systems * Strong computer skills and has basic proficiency in MS Office Suite (Word, Access, PowerPoint, Excel) * Must be able to fill out the necessary flight test documentation * Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components * Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results * Must be able to document any/all non-conformances encountered * Required to travel to and from remote flying sites on a daily basis * Must have a valid California driver's license and clean driving record * Willingness to work overtime also a must Other Qualifications & Desired Competencies * 2 year technical degree preferred; Quality system courses and/or equivalent experience preferred * Receives detailed instructions on all work. Works under close supervision. Acquires job skills and learns company policies and procedures to complete routine tasks * Solid ability to accurately record and manage data, records, files and other documents to support tasks * Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills * Strong ability to manage time and prioritize tasks * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Builds effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands * Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) * Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) * Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

This role is designed for Second Shift. The **Quality Technician I** supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. **Position Responsibilities** + Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks + Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database + Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers + Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms + Support DCMA Source Inspection process + Coordinates with Shipping and Contracts department as needed to ensure timely delivery + Also will assist flight test operators as necessary + Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection + Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system + Works on assignments that are routine in nature, requiring limited judgment + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + High School Diploma or GED equivalent is required + 0 - 1 years of related work experience or equivalent combination of education, training, and experience + Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred + Demonstrated knowledge in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. + Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 + Possesses basic knowledge of engineering drawings and specification systems + Basic knowledge of FAI validation and verification process requirements + Basic knowledge of engineering drawings and specification systems + Strong computer skills and has basic proficiency in MS Office Suite (Word, Access, PowerPoint, Excel) + Must be able to fill out the necessary flight test documentation + Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components + Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results + Must be able to document any/all non-conformances encountered + Required to travel to and from remote flying sites on a daily basis + Must have a valid California driver's license and clean driving record + Willingness to work overtime also a must **Other Qualifications & Desired Competencies** + 2 year technical degree preferred; Quality system courses and/or equivalent experience preferred + Receives detailed instructions on all work. Works under close supervision. Acquires job skills and learns company policies and procedures to complete routine tasks + Solid ability to accurately record and manage data, records, files and other documents to support tasks + Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills + Strong ability to manage time and prioritize tasks + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Builds effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests **Physical Demands** + Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) + Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) + Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **Clearance Level** Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

This role is designed for Second Shift. The Quality Technician I supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms Support DCMA Source Inspection process Coordinates with Shipping and Contracts department as needed to ensure timely delivery Also will assist flight test operators as necessary Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system Works on assignments that are routine in nature, requiring limited judgment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School Diploma or GED equivalent is required 0 - 1 years of related work experience or equivalent combination of education, training, and experience Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred Demonstrated knowledge in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 Possesses basic knowledge of engineering drawings and specification systems Basic knowledge of FAI validation and verification process requirements Basic knowledge of engineering drawings and specification systems Strong computer skills and has basic proficiency in MS Office Suite (Word, Access, PowerPoint, Excel) Must be able to fill out the necessary flight test documentation Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results Must be able to document any/all non-conformances encountered Required to travel to and from remote flying sites on a daily basis Must have a valid California driver's license and clean driving record Willingness to work overtime also a must Other Qualifications & Desired Competencies 2 year technical degree preferred; Quality system courses and/or equivalent experience preferred Receives detailed instructions on all work. Works under close supervision. Acquires job skills and learns company policies and procedures to complete routine tasks Solid ability to accurately record and manage data, records, files and other documents to support tasks Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills Strong ability to manage time and prioritize tasks Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Builds effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

The Quality Assurance (QA) Technician is responsible for the following functions for the Connectors Business Unit in Leeds, Alabama. Quality Assurance is responsible for supporting daily operations, ensuring HPS quality standards are being met, improving the manufacturing process by removing waste, process documentation and ensuring the safety of all operations. A Day In The Life * Coordinate activities with other management personnel as required. Will have a broad view of the business and need to be willing to coordinate efforts in other areas as required * Significant understanding of foundry operations along with advanced knowledge of sand systems * Ensure process optimization, quality and profitability in designated areas by way of Control Plan(s), Corrective Action(s) & Quality Alerts. * Keep management apprised of progress and obstacles that constrain attainment of company objectives. More importantly, must be able to offer proposals for overcoming said obstacles * Total awareness of the plant policies and environment as it pertains to the safety of other employees, operation of equipment, handling of equipment/materials, and visitors required. * Critical to driving waste out of our production system through Lean techniques and other cost reduction initiatives * Understand and monitor QA & Production performance as defined in foundry control plan(s). * Totally engaged in over-all foundry scrap reduction efforts and issuing scrap reports. * Provide internal auditing of plant wide procedures and processing to ensure our systems meet HPS requirements along with the ISO Standard. * Maintaining ISO 9001:2015 procedures and associated documents. * Other duties as assigned by management What will help you thrive in this role? * High School diploma or equivalent * Basic knowledge or familiarity with Quality Instruments * Flexibilty to work weekend hours as needed * Microsoft Excel, Word, and PowerPoint basic proficiency * SAP experience and strong corrective action skills are preferred Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

ABSL Space Products, a division of EnerSys Advanced Systems, is the world's leading manufacturer of lithium-ion batteries for space applications. From our Longmont, CO facility, our team designs advanced lithium-ion battery systems to meet the extreme demands of space travel. Our batteries power cutting-edge spacecraft and launch vehicles, driving innovation in space exploration, scientific discovery, and beyond. At ABSL, we maintain a tight-knit, collaborative culture where employees enjoy the small-company feel while benefiting from the resources and stability of EnerSys, the global leader in stored energy solutions. As we continue to grow, we're looking for talented individuals who share a passion for space and power technologies to join our dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: * Generous Time Off - 3+ weeks of paid time off, plus 11 paid holidays * Comprehensive Benefits - Medical, dental, and vision coverage for employees and dependents at a discounted rate * Financial & Career Growth - Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan * 401(k) Matching - 100% match at a 6% contribution level * Flexible Schedule - 9/80 work schedule (9-hour days Monday-Friday, with every other Friday off - meaning a 3-day weekend every other week!) * Innovative & Collaborative Culture - Be part of a smart, high-performing, and passionate team that values creativity, diverse backgrounds, and an inclusive environment * Great Location - Our Longmont, CO office is conveniently located right off the Diagonal Highway At ABSL, we don't just build batteries-we power missions that push the boundaries of what's possible. If you're excited about working in an innovative, fast-paced environment where your contributions make a real impact, we'd love to hear from you! Compensation Range: $46,400 - $69,500 (Compensation may vary based on applicant's work experience, education level, skill set, and/or location.) Learn More About ABSL Job Purpose ABSL is seeking a full time Quality Technician to monitor manufacturing processes by performing inspections and testing of product and equipment. Essential Duties and Responsibilities * Reports to Quality Technician Supervisor. * Performs quality control inspection of hardware to aerospace standards, drawings and work instructions. * Performs QMS systems checks to ensure compliance with documented facility procedures. * Performs peer checks for manufacturing and test technicians. * Performs material kit checks to verify correct materials and material traceability. * Ensures all build and test documentation is completed correctly. * Ensures all necessary paperwork and processes are completed following a non-conformance incident to allow build to continue. * Conducts random "audits" of build and test books to ensure compliance to procedures. * Performs final close-out of build and test books. * Performs durometer testing. * Performs incoming inspection of all purchased parts and associated paperwork. * Have the ability to obtain off-site NASA certification for Soldering, Conformal Coat and Harnessing. * Other duties as assigned by Quality Manager or Quality Inspection Supervisor. Qualifications * High School Diploma w/ 0-2 years' experience as quality inspector/technician in high-reliability company, preferably in the aerospace or medical industry OR associates degree w/ no experience. * Ability to work in a team atmosphere as a contributing member. * Ability to lift up to 50 lbs. in accordance with OSHA requirements. * Attention to detail and ability interpret engineering drawings and procedures. * Able to occasionally travel to support off-site processes. * Ability and experience utilizing magnification aids to perform inspection tasks. * Ability to obtain the following, off-site, NASA/IPC certifications including vision far, near, and color testing to NASA 8739 series requirements: o NASA 8739.1 NASA Conformal Coating & Staking (Polymerics Inspection) o IPC-620 w/ Space Addendum (Cable, Harness and Crimp) o IPC J-STD-001 w/Space Addendum * Computer competency (proficient in MS Word, Excel, Outlook, electronic travellers, etc.). General Job Requirements * Generic EnerSys provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Know Your Rights Know Your Rights (Spanish) We use artificial intelligence to screen, assess and select applicants for open positions, including for the purposes of reviewing and ranking application materials and scoring answers to application questions. Accordingly, decisions about your application and eligibility for employment with EnerSys may be made based exclusively on the automated processing of the personal information that you submit in your application materials.

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

Primary Responsibilities Inspect, reject, or accept product according to visual standard, dimensional, and other requirements. Validation/PV testing of product according to specification and other procedural requirements Documentation and recordkeeping Wear appropriate PPE. Comply with all NOV Company policies, guidelines, and procedures. Comply with all HSE policies, guidelines, and procedures. Comply with all Quality policies, guidelines, and procedures. Other duties as assigned Job Duties Work in a factory environment with significant temperature variations. Stand, walk, bend, stoop, push, pull, and perform repetitive movements for up to 12 hours daily. Lift up to 50 lbs. on a regular basis. Operate forklifts and handle material as required. Travel up to 10% as needed. Demonstrate dependability, attention to detail, and ability to work in a fast-paced environment. Accurately use scales, calipers, rulers, and depth gauges. Perform data entry and utilize Microsoft Office applications. Learn and apply API Q1 and/or ISO 9001 principles. Read and interpret drawings, instructions, and repair/assembly documentation. Cross-train and adapt to multiple tasks and duties across departments. Education and Qualifications High school diploma or equivalent required. Minimum of 3 years of quality control experience in a manufacturing environment preferred. Basic math skills and strong computer literacy. Ability to learn technical repair processes, guidelines, and procedures. Strong dependability, accuracy, and problem-solving skills. Veterans Welcome At NOV, we proudly support and hire U.S. military veterans. We recognize the value of your leadership, technical expertise, and dedication to mission success. Veterans from all branches are encouraged to apply and build a future with us. Learn More To learn more about us: **************************************************************** To learn more about our benefits: ***************************

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: Join our team as an Electrical Quality Inspector, where you'll play a crucial role in ensuring the quality and compliance of our electrical products. You'll be responsible for conducting thorough inspections and tests on electrical components, subassemblies, and finished goods, ranging from intricate control cabinets to large-scale modular buildings. Your attention to detail and expertise will directly impact our ability to deliver high-quality, safe, and reliable products to our customers. This position requires a detail-oriented individual with a strong electrical background and a commitment to maintaining rigorous quality standards. This is a full-time position. What You'll Be Working On: Electrical Inspections: Conduct ongoing inspections of all electrical installations, subassemblies, and finished goods to ensure compliance with standards. Process Audits: Execute audits of electrical assembly, control wiring, power distribution wiring, and commercial wiring installation processes. Testing and Reporting: Assist in or prepare testing and commissioning reports to document product performance and compliance. Quality Standards Documentation: Document quality standards and specifications related to electrical installations and assembly, and collaborate on training. Compliance Verification: Ensure all work is executed per approved standards and drawings, identifying and addressing deviations. Non-Conformance Documentation: Document material non-conformances found during inspections of work in process, finished goods, and receiving. Cross-Functional Collaboration: Collaborate with safety, engineering, and manufacturing teams to improve design for manufacturing and reduce inefficiencies. Regulatory Compliance: Ensure product designs comply with regulatory, commercial code, customer specifications, and engineering standards. Tool Calibration: Assist with the execution of the tool calibration program, focusing on electrical test equipment. Additional Duties: Perform other job duties as assigned to support the quality assurance process. What You'll Bring to the Team: Detail Orientation: Must be detail-driven with a strong focus on accuracy and quality. Communication Skills: Excellent interpersonal and communication skills for effective collaboration. Analytical and Decision-Making: High-level analytical ability and sound decision-making skills. Physical Requirements: Ability to lift up to 50 lbs and stand, walk, stoop, and bend for extended periods. Electrical Experience: Journeyman Electrician with 5+ years of industry experience or 7+ years in electrical assembly/inspection. Electrical Systems Knowledge: Previous exposure to low and medium voltage electrical installations. Standards Knowledge: Working knowledge of IEC, NEC, NFPA, IEEE, and NETA testing specifications. Technical Knowledge: Working knowledge of Programmable Logic Controllers, VFDs, HMI, MCC, and UPS. Component Identification: Ability to identify electrical components, hardware, and equipment. Schematic Interpretation: Ability to read, understand, and trace electrical schematics. Computer Skills: Basic computer skills with Word/Excel experience; scheduling software knowledge is a plus. Safety and Compliance: Must pass background check and drug/alcohol testing due to safety-sensitive position. Bonus Points: Experience with lean manufacturing and 5S methodologies. Experience with ISO 9001 quality management systems. Project Management Professional (PMP) or Certified Associate in Project Management (CAPM) certification. Knowledge of Material Requirements Planning (MRP) systems, particularly Accumatica ERP. Experience with advanced project management methodologies. Previous experience improving project workflows. Advanced knowledge of manufacturing processes. Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300/month Compensation: Compensation will be paid in the range of $22 - $28/hr. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant's education, experience, Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Title: Level II QC Technician Metalforms is committed to matching the needs of our customers with products and services which provide value and can help them conserve resources, improve environmental quality to increase production, reduce and avoid down time, and assist in the development of new products. This will be accomplished through design, fabrication, testing and maintenance of heat exchangers and related process equipment. At Metalforms, we provide our customers with a variety of services that have helped us to become one of the leading providers of heat transfer solutions along the Gulf Coast Region. Metalforms was recently acquired by TransTech Energy, a leading provider of custom-engineered and fabricated solutions for liquids and gas processing, storage, transfer, and utilization across a broad range of industries including energy, petrochemical, specialty chemical, renewables, biofuels, and a variety of industrial process industries. Job Summary The primary responsibilities of the Level II QC Technician are to perform shop work in the following Non-destructive Testing techniques: (MT) Magnetic Particle, (PT) Dye Penetrant, (VT) Visual Testing, and (UTT) Ultrasonic thickness testing Job Requirements High school diploma or GED required SNT-TC1A for one or all of the following (Magnetic Particle, Penetrant, or Ultrasonic testing) required Prior certification as an NDT Level II with 1 year experience or prior experience as an NDT Level I technician with adequate field experience hours to certify to level II per SNT-TC1A standards in all or one of the following (Magnetic Particle, Penetrant, or Ultrasonic testing). Must have the ability to perform a wide variety of tasks and respond to short-notice work assignments Must have the ability to adapt to an ever-changing schedule Must be able to read technical documents, blueprints, and engineering specifications Must be able to follow precise directions and procedures Benefits Designed to Work for You: Free HSA health plan or traditional PPO 401(k) with generous company match (Safe Harbor) Dental, vision, and optional coverage like accident & critical illness insurance HSA and FSA accounts to save on healthcare costs Company-paid Life, Long Term Disability, and AD&D insurance Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program Discounts on gyms, shopping & entertainment Health benefits kick in fast - first of the month after 30 days Time Off We offer a variety of paid time off options to support rest, wellness, and personal needs: Paid Time Off Paid Holidays Bereavement Leave This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #MetalForms

Implements the Quality Management System to ensure production of products consistent with established standards. ESSENTIAL JOB FUNCTIONS: *Verify Orders *Measure Parts *Hydrostatic Testing Inspections *Stamp Valves *Maintain log books *Inspect Valves *Conduct Audits *Maintain all tools and equipment, keeping them in working order. *House keeping within area *Maintain paperwork *Process Return Authorization items accordingly Qualifications SKILLS REQUIRED: *Must be able to read various measuring devices such as calipers, micrometers, dial indicators, and others. *Must be able to read drawings and blueprints. *Ability to communicate with other departments within the company. *Dependability. *Proficient with computers.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Qualifications Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: - Micrometers - Calipers - Pin/Plug Gages - Ring Gages - Go/No Go Gages - Height Gages - Profile Projectors - Profilometers - Surface Plates - Reading and interpretation of engineering drawings and specifications. - Computer skills, including familiarity with Microsoft Word and Excel. - Strong communication skills, both verbal and written. - Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. - Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Job Roles: Works in a manner consistent with company values. Creates and maintains a safe, positive, and inclusive work environment. Knowledge of Enventure's Health, Safety, Security, Environmental and Quality procedures, and processes. Observe and follow operational and QHSSE processes and procedures, and participation in behavior-based safety initiatives (Observations program) and hazard/risk mitigation (e.g., Job Safety Analysis). Performs various inspections, as required based on QC functional role (e.g., dimensional, visual, NDE, coating). Performs dimensional inspections based on functional role using, for example, OD/ID micrometers, groove micrometers, a FaroArm, thread gauges, calipers, and depth gauges. Performs visual inspections of API, premium, and non-premium threads. Performs coating inspections on tubulars using a mil thickness gauge. Generates inspection activity reports as prescribed. Completes documentation necessary to attest to satisfactory completion of inspection or test reporting. Resolves basic questions and report conditions and/or non-conformance to known standards. Reviews supporting documentation to compare specifications to MTRs or other supplier documentation to ensure compliance. Communicates with customer third party inspection, if necessary for role (e.g., Assembly Inspector). Generates and processes detailed Non-Conformance Reports (NCR), Internal Corrective Action Reports (CAR), or Supplier Corrective Action Reports (SCAR), and responds accordingly. Travels and performs inspections or other tasks at remote locations, as required. Performs other tasks as prescribed by Supervisor/Manager Scope of Job: Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations, and integrity of Enventure product performance. Consequences of error are easily measured and can be confined. Qualifications: Minimum 3-5 years: Quality Assurance and/or Control (QA/QC) experience, including documentation of quality procedures and quality inspection activities (preferred). Experience working with Enventure products and/or the oil/gas industry (preferred). Depending on functional role needs, inspector should possess an MPI (Level II Certification) and/or Dimensional and/or Thread Inspection experience/certification, which usually includes 3-5 years' experience. Minimum high school diploma or general education diploma qualification preferred; post-secondary certificate, diploma or degree from an accredited technical school or college or equivalent experience supported by applicable certification preferred.