Schweitzer Engineering Laboratories jobs in Albuquerque, NM

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Inside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Area Sales Manager for covering HVM's Ohio Valley or Northeast territory and will provide sales and technical support for all the selling resources in that area. This role will assist in generating more business by following up on leads, assisting with proposals, performing joint sales calls with the area sales manager and/or local sales engineers, and supporting additional local technical sales and marketing efforts. RESPONSIBILITIES Provide support to our Operations and Outside Sales Engineers Make regular sales calls on existing accounts and establish contact with new accounts. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. QUALIFICATIONS Ability to read one-line electrical diagram/prints. Excellent communication skills, both written and verbal Excellent customer service, organizational, and analytical skills. Proficient in MS Office. Experience with CRM Management preferred. Valid Driver's License. EDUCATION AND CERTIFICATIONS Bachelors Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military equivalent TRAVEL TIME REQUIRED 25% At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, O, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26773 Job Responsibilities We are seeking a highly skilled Senior CMM Programmer to join our innovative manufacturing team. In this pivotal role, you will be instrumental in developing and optimizing complex coordinate measuring machine (CMM) programs to ensure precision and quality in our manufacturing processes. You will leverage your extensive expertise in metrology to drive product excellence and contribute to our mission of delivering top-tier solutions. In addition to performing the calibration of the coordinate measuring machine, you will also use precise measurement tools, such as calipers and micrometers, to ensure our products meet our customer and internal standards. Applicants need to be able to read blueprints and interpret GD&T (geometric dimensioning and tolerancing) symbols, so some technical training or professional experience is preferred. What You Will Do Interpret internal and customer engineering drawings to determine inspection requirements. Create and edit CMM programs to support part inspection and validation. Perform CMM setups, including managing multiple setups simultaneously and optimizing table space. Select appropriate measuring instruments based on blueprint specifications. Execute dimensional inspections using CMM programs and manual measurement tools. Apply GD&T principles to conduct detailed part inspections. Ensure inspection programs align with part numbers and revision levels. Complete dimensional reports for PPAP and AS9102 submissions. Conduct first article, in-process, and final inspections using hand gauges and measurement systems. Perform incoming goods inspections as needed. Accurately log and maintain inspection data for traceability and reporting. Support and uphold AS9100 quality objectives and procedures. Identify and segregate non-conforming parts, ensuring proper labeling and documentation. Maintain high standards of workmanship using only approved data, materials, and tools. Problem-Solving & Communication Skills Use analytical skills to identify product issues, determine root causes, and implement corrective actions. Troubleshoot defects and verify the effectiveness of repairs. Proactively address production delays by identifying causes and proposing preventive solutions. Communicate inspection findings clearly to team members and management. Collaborate effectively within cross-functional teams to support continuous improvement. Education and Experience Required High school diploma/GED, prior certification as a PC-DMIS CMM Programmer, OR equivalent work experience. 3+ years of relevant experience. Proven experience in CMM programming (PC-DMIS and/or Verisurf). Strong understanding of metrology and dimensional inspection techniques. Ability to read and interpret blueprints and GD&T symbols. Technical training or equivalent professional experience in a manufacturing or quality control environment. Experience with flight hardware is a must. Working knowledge of AS9100, AS9102, AS13100, ISO 9001, and other relevant quality standards. Must have strong computer skills, including Microsoft Office and databases. Ability to work independently and manage multiple priorities. Job Requirements PHYSICAL DEMANDS The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. EXPORT CONTROL DISCLAIMER This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals as whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. ATTENTION: THIRD-PARTY RECRUITERS Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

HIRING FOR DAY SHIFT AND NIGHT SHIFT, 12 HOUR ROTATING SHIFTS. Work with a team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. Maintain cleanliness of maintenance shop. Follow proper lock-out/tag-out procedures. Assist to ensure adherance to all company, state and federal regulations. All other relevant duties to the job. Manufacturing equipment repair experience required. Ability to replace basic component parts on equipment. Mechanical diagnostics and repair experience. Knowledge of wire belt and plastic conveyor repairs, and sprocket alignment and installation.

Responsibilities: Perform sales support to consistently meet overall area sales goals. Make regular sales calls on existing major accounts and establish contact with new accounts. Make effective customer presentations, proposal pricing is accurate and technically correct. This may include walk-through customer site, and field visits. Perform marketing support to promote the Company's image throughout the industry. Implement area-marketing plan on a monthly basis. Assist Corporate needs in new service assessments, marketing research and literature development. Perform public relations to promote sales. Active participation in trade shows and professional societies. Give effective presentations for the Company's Training Services and Speaker's Bureau. Member of the Area Management Committee. Actively participate as a committee member. Assist in the development of the area sales and marketing plan. Bring input and new ideas on Sales and Marketing activities. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus- Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. Drive for Results- Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Interpersonal Savvy - Relates well to all kinds of people, up, down and sideways, inside and outside the organization; builds appropriate rapport; listens; builds constructive and effective relationships; uses diplomacy and tact; truly values people; can diffuse tension. Listening- Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees. Negotiating- Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be both direct and forceful as well as diplomatic; gains trust quickly. Time Management- Uses his/her time effectively and efficiently; sets priorities; values time; separates the critical few from the trivial many and concentrates his/her efforts accordingly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds and frequently lift and/or move 100-pound test sets. Valid Driver's License. Education/Experience: Graduate engineer (BSEE/BSME) and no experience. OR Graduate of electrical technical school or equivalent, and five years of similar work. OR High school diploma or equivalent and eight years of similar work. Willing to work flexible hours, weekends, some overnight travel to cover sales territory. Regularly required to sit, stand, walk, use hands and fingers, talk and hear. Required to sit and work at computer. Specific vision abilities required by this job include close vision and the ability to adjust focus. Conduct walk-through of construction sites and work in and around electrical equipment. Valid Driver's License required. TRAVEL TIME REQUIRED Up to 75% within assigned territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26071 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Determine the best method to manage and complete a project by a designated due date. • Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. • Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. • List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. • Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. • Coordinate work assigned through various auxiliary work centers and equipment as required • Occasionally assist operators and maintenance with machine or processing issues. • Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. • Effectively communicate with other personnel and educate apprentices in best practices. • Adhere to all written specifications and ensure compliance with all standards. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: • Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. • Must pass the skilled trades assessment test for this position • Proficiently operate all common machining equipment, mills, lathes, grinders, etc. • Work as a team lead as well as a team member depending on the departmental workload. • Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Time management skills and the ability to work to deadlines in a fast-paced environment. • Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. • Work from design prints, sketches, sample parts and oral instructions. • Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. • Personally possess basic inspection and machining tools to effectively perform job. • Available to work second shift, overtime and weekends as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

This position works closely with commercial paint customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Wholesale Product Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Wholesale Product Specialists are tasked with achieving excellent customer service, while consistently meeting the store's sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 - Online Application Find the role(s) that interest you on our Careers page: ****************************** Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 - Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You'll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 - In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Ensure high levels of customer satisfaction through excellent sales service Assist customers in person and over the phone by determining needs and presenting appropriate products and services Build productive trust relationships with wholesale customers Process sales transactions accurately and consistent with policies and procedures Follow and achieve sales goals on a monthly, quarterly, and yearly basis Maintain precise work order files and formulas Pull appropriate products from the sales floor or warehouse Tint and mix products, as needed, to customer specifications Stock shelves and set up displays Clean store equipment Load/unload delivery trucks Assist in making deliveries, as needed Maintain in-stock and presentable condition assigned areas Remain knowledgeable on products offered and discuss available options Comply with inventory control procedures Suggest ways to improve sales Minimum Requirements: Must be at least eighteen (18) years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must be able to read, write, comprehend, and communicate in English Must be to read, write, comprehend, and communicate in Spanish Must have a valid, unrestricted Driver's License Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation Preferred Qualifications: Have at least a High School diploma or GED Have at least one (1) year experience working in a delivery, retail, or customer service position Have previous work experience selling paint and paint related products Have previous work experience operating tinting and mixing equipment #SHWSalesBL

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($39,624.00 - $57,408.00) Target Bonus: % Req ID: 27507 Summary Are you interested in working with custom automotive builds? Do you have mechanical experience you want to put to the test? Are you looking for an exciting & rewarding career with a global industry leader? Vanair, a Lincoln Electric company, has been an industry leader for 52 years, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. What You Will Do As an experienced Truck Upfitter/ Equipment Installer, you will deliver outstanding products to customers who have trusted our brands for decades. If you like being challenged, want to be a part of the company's expansion, and are looking for personal development and growth, then we're looking for you! You will install various types of truck bodies, Mobile Power Systems , lighting packages, graphics, and other equipment to complete new custom builds for the work truck industry. You will work alongside some of the best in the business and will drive business growth. Education & Experience Required Vocational Training and 3+ years relative experience required; or GED with 3+ years in related field (does not require a university degree). Experience in automotive repair or vehicle upfitting is a plus. Must be able to read and interpret prints, electrical schematics and work orders Must be able to perform good mechanical and electrical assembly including troubleshooting any related issues. Must understand the use of all production equipment. Must be familiar with and understand all procedures and specifications relating to assembly, testing. This includes Process Control, Inspection and Testing, Inspection and Test Status, Must have the ability to lift up to 60 pounds; bend and lift containers. Must have the ability to operate cranes and fork trucks safely and responsibly. Must have the ability to properly adjust Volts/WFS, and weld with a MIG welder. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Posting End Date: Accepting applications until job is filled and/or up to 60 days from the posting date Job Location: Fort Morgan, CO Job Type: Full Time Shift(s) Available: 3rd Compensation: $28.75/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc… Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Required Qualifications Eligible to work in the U.S. without visa sponsorship 18 years or older High school diploma or GED Able to read, write, and speak English Basic computer skills (Windows 7/10, Microsoft Office) Familiarity with Allen-Bradley PLCs (basic programming & troubleshooting) Comfortable learning new software and systems (PLC/HMI) Willing to work 6 days a week Preferred Qualifications Experience in a food processing environment Proficient in Allen-Bradley PLC programming (RSLogix 500/ControlLogix 5000, FactoryTalk View) Skilled in installing and troubleshooting Ethernet-based industrial networks Able to read schematics and perform machine installation/repairs Knowledge of basic electrical circuits (24V & 120V AC/DC) 2-year degree in electrical/electromechanical tech or 3+ years in industrial controls/networking Bilingual in English/Spanish or English/Somali Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Position OverviewThe primary purpose of the Tech III, MHE position is to oversee and repair material handling equipment (MHE). This role will oversee the safe operation, repairs, and preventative maintenance of MHE equipment including electric and propane industrial forklifts, pallet jacks, hi-low lifts, scissor lifts, scrubbers/sweepers, battery charging stations and cars, batteries, etc. Provide assistance to Supervisor/Manager of Maintenance to ensure assets are managed in accordance with the following: Equipment/parts manufacturers, equipment/parts suppliers, EPA, OSHA and applicable State and Local Codes.Job Description Benefits start on day one! Schedule: Monday-Friday 8am-4:30pm (weekends as needed) Compensation: $27-$34/hour Check out a day in the life here: *********************************** You will contribute by: Oversee and manage the repair of the MHE fleet including monitoring and trending, troubleshooting and repairs and preventative maintenance. Conducting preventive maintenance (P.M.'s) within manufacturer's guidelines/specifications and established timelines to include oil changes, filter changes, calibration of equipment, belts changes, inspections, adjustments, lubrication, etc. Concise reporting of required inspections, evaluations, P.M. procedures, etc. and clear communication with Management, etc. Responsible for logging time and materials into computerized maintenance management system (CMMS) on a daily basis in the form of repairs, P.M.s, etc. Responsible for daily communication of all pertinent information regarding equipment operation and maintenance to departmental management and other maintenance teams. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Required to interpret and understand plans and specifications, schematics, operating and maintenance manuals, etc. for all systems being overseen. Assist manager/supervisor in developing standard operating procedures, daily work schedules, and duty cycles for all repairs and maintenance for MHE and battery equipment. Assist in managing outside battery, MHE, and electrical contractors conducting service, repair and new contract work. Assist management in creation of budgets for individual projects, yearly capital and yearly operating expenses. This position will also assist the battery technicians. Duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, and other general maintenance activities. This position will also assist the building and refrigeration maintenance teams. Duties will include assisting in general building repairs, electrical troubleshooting and repairs, refrigeration systems repair and maintenance, and other general maintenance activities. Travel Required: No Environment Warehouse: Grocery Warehouse (50F to 90F) Warehouse: Perishable Warehouse (28F to 60F) Skills Extensive experience with Crown, Raymond, and Toyota material. Manufacturer Certifications (Raymond, Crown, Toyota, etc.)handling equipment. Detailed knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems. Detailed knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, steering systems, suspension systems, etc. Building and HVAC: General knowledge of building (Dock doors and plates, electrical, HVAC systems, etc.) systems. CMMS: Computerized Maintenance Management System experience for logging work orders and P.M.s Hydraulic systems, Electronic Systems, PLC/Low Voltage Control Systems Physical abilities: Some travel, site inspections, equipment inspections, mechanical repairs and replacements, all which require good mobility, physical exertion, walking, bending, reaching, climbing ladders, carrying tools and parts, etc. OSHA, ASE Certifications (Electrical, Mechanical, Braking Systems, etc.) Although this position states no travel required, there may be times when support is needed at other facilities and travel may be asked of the associate. Years Of Experience 2-5 years: Relevant experience. 4 years: MHE Maintenance Position. We Offer Benefits available from day 1 (medical, dental, vision) Company Matched 401-k Paid training Weekly Pay PTO and Holiday Pay offered Career Progression Opportunities Tuition Reimbursement Employee Health & Wellness program Employee Discounts / Purchasing programs Employee Assistance Program C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. QualificationsKPIs, Safety & Sanitiation, Technical Certification - Electrical Engineering Technology, Training & Development, Values & Teamwork, WarrantyShift1st Shift (United States of America) CompanyC&S Wholesale Services, LLCAbout Our Company C&S Wholesale Services is one of many companies within the C&S Family of Companies, the largest wholesale grocery supply company in the U.S. and the industry leader in supply chain innovation. At C&S, We Select the Best & those with the motivation, pride, and drive to succeed in our fast-paced world. Working Safely is a Condition for Employment with C&S Wholesale Services, Inc. C&S Wholesale Services, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.