SAIC jobs in Dallas, TX - 93 jobs

+ **ATTN FERS RETIREES: Earnings received as an ATC Instructor, ATC Training Instructional Supervisor, or Contractor Site Supervisor working on this program are EXEMPT from the Supplemental Annuity earnings limits for FERS retirees between the ages of 56 and 62.** We are looking for an experienced, **Full-time,** **Air Traffic Control Instructor-II** to join the SAIC Controller Training Solutions (CTS) team at the **Dallas/Fort Worth International ATCT (DFW),** located at **Dallas, TX** **,** supporting air traffic controller training services for the Federal Aviation Administration (FAA). The successful candidate for this position must demonstrate strong technical skills with current ATC automation, simulation systems and procedures. This position may provide mentoring for students and Remote Pilot Operators (RPO), and may participate in curriculum design and development. The selected candidate must demonstrate the knowledge and skills applicable for obtaining radar and/or non-radar simulation laboratory certifications at FAA air traffic control facilities within the U.S. National Airspace System. The CTS Instructor is a hands-on position that requires the candidate to effectively and consistently deliver the highest quality classroom and/or simulation laboratory training to a wide variety of students including developmental air traffic controllers and Certified Professional Controllers (CPC). The Federal Aviation Administration (FAA) is responsible for ensuring that air traffic control specialists provide the flying public with a high level of safety and professionalism. A well-trained Air Traffic Control (ATC) workforce plays an essential role in fulfilling this responsibility. The FAA employs more than 14,000 air traffic controllers. They work in air traffic facilities of varying sizes, safely separating more than 50,000 aircraft in the National Airspace System (NAS) each day. To provide such air traffic services, the FAA trains new air traffic control specialists and provides recurrent training to current air traffic control specialists. The FAA utilizes Contractor-provided instructional services at FAA ATC facilities throughout the U.S. and its Territories to ensure these training needs are met. The scope of the contractor-provided services includes all training and training program support to successfully train and prepare students to become fully certified air traffic controllers. SAIC must provide training and training related support services as required for all types and levels of ATC facilities. **Qualifications** **Required Qualifications:** + **US Citizenship is required with the ability to obtain and maintain a Public Trust clearance** + The CTS Instructor candidate must have a minimum of five (5) years of FAA CPC experience controlling live traffic, or recent experience as a contract Instructor at an FAA facility. Experience must have been at the same type and same [or greater] level of ATC facility as the **Dallas/Fort Worth International ATCT (DFW)** **Desired Skills and Experience:** + Direct experience as a Certified Professional Controller (CPC) at the **Dallas/Fort Worth International ATCT (DFW)** is preferred but not required + Operational Experience with ATC simulators including scenario design for simulation platforms (e.g. TSS, AT Coach, SGET, etc.) + Demonstrated ability to interface effectively with FAA personnel at all levels to ensure the delivery of training services meet the needs of the local facility, as well as the FAA's overall Air Traffic Control mission is highly desired + Experience demonstrating excellent teaching and/or platform skills, classroom management techniques, and a student-focused drive for continuous improvement **Education:** + High school diploma or equivalent (GED) required + **FAA Certified Professional Controller (CPC) certification required with the ability to obtain and maintain Instructor-II Simulation Laboratory and Classroom Certification** REQNUMBER: 2512661 SAIC is a premier technology integrator, solving our nation's most complex modernization and systems engineering challenges across the defense, space, federal civilian, and intelligence markets. Our robust portfolio of offerings includes high-end solutions in systems engineering and integration; enterprise IT, including cloud services; cyber; software; advanced analytics and simulation; and training. We are a team of 23,000 strong driven by mission, united purpose, and inspired by opportunity. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $6.5 billion. For more information, visit saic.com. For information on the benefits SAIC offers, see Working at SAIC. EOE AA M/F/Vet/Disability

See what you're missing. Our employees work on the world's most advanced electronics - from detecting threats for F-35 pilots to illuminating the night for soldiers. Spanning air, land, sea, and space, we are developing the technology of tomorrow, delivered today. Drawing strength from our differences, we're innovating for the future. And you can, too. Our flexible work environment provides you a chance to change the world without giving up your personal life. We put our customers first - exemplified by our mission: “We Protect Those Who Protect Us .” Sound like a team you want to be a part of? Come build your career with BAE Systems. As we navigate the complexities of developing technology, BAE Systems is seeking a Manufacturing Director to identify and drive manufacturing technologies that support the vision for factory workplace of the future. The Manufacturing Director manages the defense manufacturing facility and reports to the C4ISR Business Area Operations Director. This role will serve as the factory lead dedicated to manufacturing of products that meet or exceed performance for quality, delivery, and cost while driving a continuous improvement culture. The candidate will manage operations-related plans, budgets, policies, and procedures while maintaining safety and regulatory compliance relating to the manufacturing facility. This role has a 9/80 schedule where you will have every other Friday off. Responsibilities are listed as follows: Operations leadership in a high volume high / mix manufacturing leading teams in manufacturing of complex electro/mechanical hardware. Accountability for performance metrics to meet Safety, Quality, Delivery & Cost. Drives Factory Standardization by leveraging common manufacturing processes. Develops the team with the skills and capabilities to meet the factory demands through staff development, mentoring, & personal growth opportunities. Shape Team Culture and workforce integrity in the factory. Establishes a work environment of openness and trust where employees are challenged, developed, and work together as a team to achieve business objectives. Factory ownership responsible to ensure manufacturing readiness. Implements lean and continuous improvement activities in the business. Manages functional expense budgets and manufacturing rates. Ensures product meets requirements for Transition to Production. Manages Factory Capacity modeling & capital utilization. Lead or support complex affordability projects, including future automation efforts where applicable. Development and execution of manufacturing strategy across multiple programs within the factory. Develop and implement both a manufacturing and technical roadmap for the 5-year IBP. Collaborate with FAST Labs and New Product Introduction organizations to connect Technology IRAD with Manufacturing IRAD to develop a comprehensive plan that incorporates both aspects for future development. Pursue and execute Manufacturing IRAD projects to advance Operations capability and technical expertise Because of the need for consistent, in-person collaboration this role will be performed full-time on site. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified. Significant Operations leadership experience. Knowledge and/or experience with AS9145/APQP or similar performance quality standards. Continuous Improvement philosophy and practice Lean Six Sigma. Proven record of on time, on budget, high quality product production. Able to effectively work and collaborate across company's technical and non-technical functional disciplines (Program Office, Engineering, Quality, Supply Chain, Finance, Communications, Human Resources). Proven leader, adept at navigating complex matrixed organizations, effectively communicating with stakeholders at all levels. Creative and Innovative problem solver. Able to obtain an Active Secret clearance. Bachelor's Degree and 12 years work experience or equivalent experience. Experience leading a growing organization is preferred. Experience navigating customer and compliance audits. Benefits Information Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Intern Benefits: Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. Please note: Some benefits may be different for union employees that are governed by a collective bargaining agreement (CBA) or for positions covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA).

**Join a Team that's Shaping the Future of IT Support** At BAE Systems, we're passionate about delivering innovative IT solutions that enable our customers to achieve their missions. As a Remote Initial Support Analyst, you'll play a critical role in providing **Tier 1** analysis and support for zero client, thin client, thick client, desktop, laptop, and high-performance end-user computing services and peripheral devices. You'll work closely with our team to ensure seamless delivery of IT services, utilizing existing, Government-owned devices to the maximum extent practicable. Your day-to-day responsibilities will include managing the logistics of developing and deploying integrated solutions, ordering, operating, maintaining, and transporting assets. You will also provide basic print services for all identified devices, operate, install, configure, and maintain printer devices, and coordinate and track end-user and common device service handoffs. As a technical expert, you will exercise considerable latitude in determining objectives and approaches to assignments. By joining our team, you will have the opportunity to work on exciting projects, collaborate with a talented team, and make a significant impact on the customer's operations. Our company values innovation, teamwork, and customer satisfaction, and we are committed to providing a supportive and dynamic work environment. If you are a motivated and skilled technical support analyst looking for a new challenge, we encourage you to apply. + Experience with printer devices, including installation, configuration, and maintenance + Strong project management skills, with the ability to lead projects and teams + Experience working in a fast-paced, dynamic environment with multiple priorities and deadlines + Experience with ServiceNow, JIRA and similar **Location Requirement** The successful candidate must be located within 50 miles of Champaign, IL, Cincinnati, OH, Fort Worth, TX or Huntington, WV. \#Castle-Net **Required Education, Experience, & Skills** **Required Education, Experience, & Skills** + 2 years of experience with Bachelor's degree in Computer Science, Information Technology, or related field + 8 years of experience in IT support, with a focus on end-user computing services and peripheral devices + Applies extensive expertise, and has full knowledge of other related disciplines + Work is performed with some direction, but with considerable latitude in determining objectives and approaches to assignment + Strong analytical and problem-solving skills, with the ability to troubleshoot complex technical issues + Excellent communication and interpersonal skills, with the ability to work effectively with customers and team members **Technical Skills:** + Experience with IT service management frameworks (e.g., ITIL) + Knowledge of network protocols and architectures (e.g., TCP/IP, DNS, DHCP) + Familiarity with virtualization technologies (e.g., VMware, Citrix) + Experience with remote access and service capabilities **Certifications:** + MCSA, VCP or similar industry certification **Preferred Education, Experience, & Skills** + **Education:** + Master s degree in information technology, Cybersecurity, Data Science, Information Systems, Computer Science, or related field. + **Certifications:** + MCSA, VCP or similar industry certification + **Experience:** + Experience with cloud-based solutions, including AWS, Azure, and/or Google Cloud. + Configuration Management/Document Management. + Experince with ServiceNow and JIRA **What We Offer:** + **Competitive Salary and Benefits:** + Competitive salary and benefits package. + **Professional Development:** + Opportunity to work with a dynamic team in a fast-paced environment. + Professional development and growth opportunities. **Pay Information** Full-Time Salary Range: $60076 - $102130 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Level 2 Technical Support Analyst** **118365BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

DXC Technology (NYSE: DXC) helps global companies run mission-critical systems and operations while modernizing IT, optimizing data architectures, and ensuring security and scalability across public, private, and hybrid clouds. The world's largest companies and public sector organizations trust DXC to deploy services across the Enterprise Technology Stack to drive new performance levels, competitiveness, and customer experience. Learn more about how we deliver excellence for our customers and colleagues at DXC.com. Essential Job Functions • Participate in data engineering tasks, including data processing and integration activities. • Assist in the development and maintenance of data pipelines. • Collaborate with team members to collect, process, and store data. • Contribute to data quality assurance efforts and adherence to data standards. • Use data engineering tools and techniques to analyze and generate insights from data. • Collaborate with data engineers and other analysts on data-related projects. • Seek out opportunities to enhance data engineering skills and domain knowledge. • Stay informed about data engineering trends and best practices. Basic Qualifications • Bachelor's degree in a relevant field or equivalent combination of education and experience • Typically, 5+ years of relevant work experience in industry, with a minimum of 2 years in a similar role • Proven experience in data engineering • Proficiencies in data engineering tools and technologies • A continuous learner that stays abreast with industry knowledge and technology Other Qualifications • Advanced degree in a relevant field a plus • Relevant certifications, such as Oracle Certified Professional, MySQL Database Administrator a plus At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive. If you are an applicant from the United States, Guam, or Puerto Rico DXC Technology Company (DXC) is an Equal Opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. View postings below . We participate in E-Verify. In addition to the posters already identified, DXC provides access to prospective employees for the Federal Minimum Wage Poster, Federal Polygraph Protection Act Poster as well as any state or locality specific applicant posters. To access the postings in the link below, select your state to view all applicable federal, state and locality postings. Postings are available in English, and in Spanish, where required. View postings below. Postings Link Disability Accommodations If you are an individual with a disability, a disabled veteran, or a wounded warrior and you are unable or limited in your ability to access or use this site as a result of your disability, you may request a reasonable accommodation by contacting us via email. Please note: DXC will respond only to requests for accommodations due to a disability. Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available here .

**Demo Specialist - Life & Annuity Insurance Industry Software and Agentic AI** **About the Role** We're looking for a stand-out Insurance software, Cloud, SaaS, and Agentic AI Demo Specialist-someone who pairs deep life insurance technology expertise with a passion for the transformational power of agentic AI. In this role, you'll help insurers imagine the future: smarter underwriting, automated decisions, adaptive workflows, and agent-assisted operations that reshape how life insurance is bought, sold, serviced and fulfilled. Your storytelling and technical fluency will bring out unforgettable demo experiences to showcase the future that is possible today through DXC. You'll be the bridge to help insurers see how to leverage technical and robust foundations with agentic AI to overcome their operational challenges. **Key Responsibilities** **Create world-class demo experiences** + Deliver high-impact, narrative-driven demos for life insurers and industry analyst firms, showcasing the power of agentic AI and insurance workflow solutions. + Bring the _wow factor_ -memorable demonstrations that shift mindsets and spark excitement about the future of insurance. + Translate complexity-underwriting, policy administration, and claims workflows- into compelling business stories that illustrate how to transform to achieve outcomes. **Build a modern demo strategy** + Own a scalable demo framework that elevates the user experience and drives sales momentum. + Tailor demo scenarios to reflect real-world operations, regulatory constraints, and business value levers for life insurers. + Continuously refine demo environments, experimenting with new use cases in industry-relevant scenarios. **Collaborate across the business** + Collaborate closely with Sales, Marketing, Product, and Engineering to ensure demos align with product releases, roadmap priorities, and market trends. + Provide structured product feedback based on demo experiences, client reactions, and emerging AI opportunities. + Partner with Training to develop internal demo playbooks, enablement sessions, and a certification path for demo colleagues. **Evangelize and educate** + Serve as a subject matter expert at industry events and webinars-representing both the life insurance domain and the possibilities of agentic AI. + Stay ahead of industry trends, regulatory changes, and AI advancements to ensure demos remain fresh, credible, and visionary. **Required Skills & Experience** + **5+ years in life insurance** -product, pre-sales, solutions consulting, outbound product management, B2B SaaS, operations, IT or related roles in a carrier or supplier. + **Familiarity with technical aspects such as agentic AI, intelligent automation, SaaS, policy admin, insurtech, and/or decisioning platforms** for the life insurance sector. + Exceptional communication, executive presence, and business storytelling abilities. + Ability to translate complexity for business-driven outcomes. + Comfort with **low-code/no-code tools, APIs, and workflow integrations** (no coding required, but technical fluency is key). + Ability to travel for client engagements and industry events. **Preferred Qualifications** + Experience with **life insurance platforms or major InsurTech systems** . + Background in **insurance operations, process improvement, or business analysis** . + Demonstrated ability to design or deliver demos featuring automation, analytics, or AI. **Work Environment** + The selected candidate may be required to report to the nearest DXC office. + Work Schedule: Monday-Friday, standard business hours At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive. **If you are an applicant from the United States, Guam, or Puerto Rico** DXC Technology Company (DXC) is an Equal Opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. View postings below . We participate in E-Verify. In addition to the posters already identified, DXC provides access to prospective employees for the **Federal Minimum Wage Poster, Federal Polygraph Protection Act Poster as well as any state or locality specific applicant posters** . To access the postings in the link below, select your state to view all applicable federal, state and locality postings. Postings are available in English, and in Spanish, where required. View postings below. Postings Link (****************************************************************************************************** **Disability Accommodations** If you are an individual with a disability, a disabled veteran, or a wounded warrior and you are unable or limited in your ability to access or use this site as a result of your disability, you may request a reasonable accommodation by contacting us via email (*****************) . Please note: DXC will respond only to requests for accommodations due to a disability. Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available here _._

What s it like to leverage your skills to confront the challenges presented by producing state of the art electronic systems that protect national security? Rewarding. As part of our Manufacturing Engineering team, you will be responsible for ensuring the manufacturability of high-end electronic products. This position serves as the link between the Engineering Department and Production and ensures that any manufacturability issues are addressed. The Manufacturing Engineer designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, and material handling early in the design process to ensure the product design has manufacturing considerations. The Manufacturing Engineer also designs sequence of operations to manufacture products and specifies tools and equipment required to support manufacturing. As a member of the Manufacturing Engineering team, you will also: + Provide oversight of the manufacture of products to ensure that engineering documentation is consistent with manufacturing methods employed + Work within the company policies to manage the aspects of new product introduction + Work with Design Engineering to develop test methods/procedures to support product validation efforts + Verify performance validation tests for introduction into Production Test + Determine root cause of manufacturing problems + Monitor process variables + Assist with Assembly and Test personnel training + This position also serves as the liaison between engineering and manufacturing **Required Education, Experience, & Skills** + Bachelor of Science in Electrical Engineering, Bachelor of Science in Technology, or equivalent experience + Minimum 2 years experience in Electronic Manufacturing Engineering role **Preferred Education, Experience, & Skills** + Knowledge of RF/Microwave circuitry is a plus + Knowledge of Pick-and-Place processes is a plus **Pay Information** Full-Time Salary Range: $70735 - $120250 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Manufacturing/Process Engineer** **116437BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

Join a Team that's Shaping the Future of IT Support At BAE Systems, we're passionate about delivering innovative IT solutions that enable our customers to achieve their missions. As a Remote Initial Support Analyst, you'll play a critical role in providing Tier 1 analysis and support for zero client, thin client, thick client, desktop, laptop, and high-performance end-user computing services and peripheral devices. You'll work closely with our team to ensure seamless delivery of IT services, utilizing existing, Government-owned devices to the maximum extent practicable. Your day-to-day responsibilities will include managing the logistics of developing and deploying integrated solutions, ordering, operating, maintaining, and transporting assets. You will also provide basic print services for all identified devices, operate, install, configure, and maintain printer devices, and coordinate and track end-user and common device service handoffs. As a technical expert, you will exercise considerable latitude in determining objectives and approaches to assignments. By joining our team, you will have the opportunity to work on exciting projects, collaborate with a talented team, and make a significant impact on the customer's operations. Our company values innovation, teamwork, and customer satisfaction, and we are committed to providing a supportive and dynamic work environment. If you are a motivated and skilled technical support analyst looking for a new challenge, we encourage you to apply. Experience with printer devices, including installation, configuration, and maintenance Strong project management skills, with the ability to lead projects and teams Experience working in a fast-paced, dynamic environment with multiple priorities and deadlines Experience with ServiceNow, JIRA and similar Location Requirement The successful candidate must be located within 50 miles of Champaign, IL, Cincinnati, OH, Fort Worth, TX or Huntington, WV. #Castle-Net Required Education, Experience, & Skills 2+ years of experience with Bachelor's degree in Computer Science, Information Technology, or related field 8+ years of experience in IT support, with a focus on end-user computing services and peripheral devices Applies extensive expertise, and has full knowledge of other related disciplines Work is performed with some direction, but with considerable latitude in determining objectives and approaches to assignment Strong analytical and problem-solving skills, with the ability to troubleshoot complex technical issues Excellent communication and interpersonal skills, with the ability to work effectively with customers and team members Technical Skills: Experience with IT service management frameworks (e.g., ITIL) Knowledge of network protocols and architectures (e.g., TCP/IP, DNS, DHCP) Familiarity with virtualization technologies (e.g., VMware, Citrix) Experience with remote access and service capabilities Certifications: MCSA, VCP or similar industry certification About BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Intelligence & Security (I&S), based in McLean, Virginia, designs and delivers advanced defense, intelligence, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do-from intelligence analysis, cyber operations and IT expertise to systems development, systems integration, and operations and maintenance services. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats inspires us to push ourselves and our technologies to new levels. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified. Education: Master's degree in information technology, Cybersecurity, Data Science, Information Systems, Computer Science, or related field. Certifications: MCSA, VCP or similar industry certification Experience: Experience with cloud-based solutions, including AWS, Azure, and/or Google Cloud. Configuration Management/Document Management. Experince with ServiceNow and JIRA What We Offer: Competitive Salary and Benefits: Competitive salary and benefits package. Professional Development: Opportunity to work with a dynamic team in a fast-paced environment. Professional development and growth opportunities. Benefits Information Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Intern Benefits: Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. Please note: Some benefits may be different for union employees that are governed by a collective bargaining agreement (CBA) or for positions covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA).

See what you re missing. Our employees work on the world s most advanced electronics from detecting threats for F-35 pilots to illuminating the night for soldiers. Spanning air, land, sea, and space, we are developing the technology of tomorrow, delivered today. Drawing strength from our differences, we re innovating for the future. And you can, too. Our flexible work environment provides you a chance to change the world without giving up your personal life. We put our customers first exemplified by our mission: We Protect Those Who Protect Us. Sound like a team you want to be a part of? Come build your career with BAE Systems. As we navigate the complexities of developing technology, BAE Systems is seeking a Manufacturing Director to identify and drive manufacturing technologies that support the vision for factory workplace of the future. The Manufacturing Director manages the defense manufacturing facility and reports to the C4ISR Business Area Operations Director. This role will serve as the factory lead dedicated to manufacturing of products that meet or exceed performance for quality, delivery, and cost while driving a continuous improvement culture. The candidate will manage operations-related plans, budgets, policies, and procedures while maintaining safety and regulatory compliance relating to the manufacturing facility. This role has a 9/80 schedule where you will have every other Friday off. Responsibilities are listed as follows: + Operations leadership in a high volume high / mix manufacturing leading teams in manufacturing of complex electro/mechanical hardware. + Accountability for performance metrics to meet Safety, Quality, Delivery & Cost. + Drives Factory Standardization by leveraging common manufacturing processes. + Develops the team with the skills and capabilities to meet the factory demands through staff development, mentoring, & personal growth opportunities. + Shape Team Culture and workforce integrity in the factory. Establishes a work environment of openness and trust where employees are challenged, developed, and work together as a team to achieve business objectives. + Factory ownership responsible to ensure manufacturing readiness. + Implements lean and continuous improvement activities in the business. + Manages functional expense budgets and manufacturing rates. + Ensures product meets requirements for Transition to Production. + Manages Factory Capacity modeling & capital utilization. + Lead or support complex affordability projects, including future automation efforts where applicable. + Development and execution of manufacturing strategy across multiple programs within the factory. + Develop and implement both a manufacturing and technical roadmap for the 5-year IBP. + Collaborate with FAST Labs and New Product Introduction organizations to connect Technology IRAD with Manufacturing IRAD to develop a comprehensive plan that incorporates both aspects for future development. + Pursue and execute Manufacturing IRAD projects to advance Operations capability and technical expertise Because of the need for consistent, in-person collaboration this role will be performed full-time on site. **Required Education, Experience, & Skills** + Significant Operations leadership experience. + Knowledge and/or experience with AS9145/APQP or similar performance quality standards. + Continuous Improvement philosophy and practice Lean Six Sigma. + Proven record of on time, on budget, high quality product production. + Able to effectively work and collaborate across company s technical and non-technical functional disciplines (Program Office, Engineering, Quality, Supply Chain, Finance, Communications, Human Resources). + Proven leader, adept at navigating complex matrixed organizations, effectively communicating with stakeholders at all levels. + Creative and Innovative problem solver. + Able to obtain an Active Secret clearance. **Preferred Education, Experience, & Skills** + Bachelor's Degree and 12 years work experience or equivalent experience. + Experience leading a growing organization is preferred. + Experience navigating customer and compliance audits. **Pay Information** Full-Time Salary Range: $150370 - $255630 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Manufacturing Director** **116324BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

DXC Technology (NYSE: DXC) helps global companies run mission-critical systems and operations while modernizing IT, optimizing data architectures, and ensuring security and scalability across public, private, and hybrid clouds. Leading companies and public sector organizations trust DXC to deploy services across the Enterprise Technology Stack to drive performance, competitiveness, and customer experience. Learn more at DXC.com. At DXC, we leverage technology to deliver mission-critical IT and business process services that help clients optimize operations, improve customer experience, and drive growth. Our Insurance Services support middle- and back-office operations, financial reporting, compliance, and customer service transformation. Role Overview The Analyst, Insurance Operations - Quality & Financial Control plays a key role in supporting operational excellence through transactional oversight, financial control, process quality, and customer complaint resolution. This role requires experience with life and annuities, financial control, reporting, governance, and operational management. Exposure to call center operations is a plus. Key Responsibilities Monitor and execute daily insurance transactions accurately, ensuring adherence to operational and regulatory standards. Support financial control activities including reconciliations, reporting, budgeting, and variance analysis. Track, investigate, and resolve customer complaints, identifying root causes and implementing preventive measures. Analyze operational and financial data to identify trends, inefficiencies, and improvement opportunities. Assist in developing and maintaining quality frameworks, audits, and compliance checks to ensure service excellence. Collaborate with operations, finance, and leadership teams to support risk management and process governance. Contribute to process improvement initiatives aimed at increasing efficiency, scalability, and accuracy. Support reporting of operational KPIs, SLA adherence, quality metrics, and customer satisfaction measures. Assist in workforce planning and resource allocation to meet business demands while maintaining operational quality. Provide guidance and knowledge-sharing to peers, promoting accountability, compliance, and continuous learning. Basic Qualifications Bachelor's degree in Business, Finance, Operations, or a related field (or equivalent experience). 3-5 years of experience in insurance operations, financial control, or transaction management. Knowledge of life and annuities products, operational governance, and financial reporting. Strong analytical skills and attention to detail for reviewing operational and financial data. Understanding of quality frameworks, compliance standards, and customer complaint resolution processes. Effective communication skills and ability to collaborate across multiple teams. Preferred / Additional Qualifications Experience in call center operations or managing customer inquiries/escalations. Familiarity with regulatory and compliance standards in the insurance industry. Knowledge of reporting tools, dashboards, and operational metrics. FINRA 6 or 7 certification is desirable. Key Competencies Quality and compliance orientation Operational excellence and process improvement mindset Financial and analytical acumen Customer-focused problem-solving Effective communication and stakeholder collaboration Ability to work in a fast-paced, metrics-driven environment At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive. If you are an applicant from the United States, Guam, or Puerto Rico DXC Technology Company (DXC) is an Equal Opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. View postings below . We participate in E-Verify. In addition to the posters already identified, DXC provides access to prospective employees for the Federal Minimum Wage Poster, Federal Polygraph Protection Act Poster as well as any state or locality specific applicant posters. To access the postings in the link below, select your state to view all applicable federal, state and locality postings. Postings are available in English, and in Spanish, where required. View postings below. Postings Link Disability Accommodations If you are an individual with a disability, a disabled veteran, or a wounded warrior and you are unable or limited in your ability to access or use this site as a result of your disability, you may request a reasonable accommodation by contacting us via email. Please note: DXC will respond only to requests for accommodations due to a disability. Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available here .

Job Category: Service Contract Act Time Type: Full time Minimum Clearance Required to Start: DOJ MBI Employee Type: Regular Percentage of Travel Required: Up to 10% Type of Travel: Continental US * * * The Opportunity: CACI is seeking a Paralegal (Legal Assistant I) to support the Department of Justice's mission. This position plays a critical role and involves working on high-profile cases. We are looking for candidates who are able to work in an office setting. Paralegal duties focus on litigation support and preparation for upcoming trials. This is an opportunity for you to provide case management and database maintenance assistance in a litigation support capacity. You will also gain invaluable experience using automated litigation support and eDiscovery tools and resources to add to your skillset. The Paralegal (Legal Assistant I) role works closely with federal prosecutors supporting the Health Care Fraud Unit in a fast-paced setting and assist in the investigation and prosecution of various matters to enforce the laws of the United States, up to and including support assistance for witness interviews, deposition preparation, and in-courtroom trial support. CACI is committed to growing our eDiscovery workforce and has included tuition reimbursement for Relativity certifications, the ACEDS certification and Paralegal Certificates! This is a great opportunity to grow your career. Please apply if you are interested to hear more! Responsibilities: The Paralegal works under the direction of Supervisory Paralegal. In this role, you will perform litigation services while complying with established procedures, including but not, but not limited to the following: * Compiles, prepares, and summarizes relevant materials for use by attorneys in discovery and in preparation of motions, briefs and other legal documents. * Summarizes depositions and other transcripts; maintains case files * Performs simple legal research * Indexes, tracks and controls document discovery (including documents produced and received in discovery). * Indexes, tracks and exhibits and other materials at depositions and at trial. * Prepares exhibit cross-references. * Assists attorneys in courtroom. * Reviews documents for relevance and privilege according to established guidelines and criteria. * Other examples of the types of work to be performed include compilation of documents for FOIA, production requests, Congressional inquiries, etc. Qualifications: Required: * Requires paralegal certificate, or a four-year college degree. * Additionally, at least one year of litigation paralegal experience or project experience (including internships) related to health care, project or document management, policy, research, government staffing, publishing; or equivalent experience. * Requires excellent written and oral communication skills, thorough knowledge and hands-on familiarity with a variety of computer applications, including word processing, databases (such as document review and file management systems), spreadsheets, imaging, and hardware systems. * Requires technological proficiency in Microsoft Suites (Word, Excel, PowerPoint). * Must have an understanding on how electronically stored information (computer files) work within an operating system including experience effectively managing, organizing, and analyzing digital files and folders. * Transferable skills related to Electronically Stored Information (ESI) tools and eDiscovery procedures and resources. Coding skills are welcomed, although not required. * Ability to consistently deliver highest quality work under extreme pressure will be very important. * DOJ MBI must be obtainable (US Citizenship required). * ________________________________________________________________________________________ What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. ________________________________________________________________________________________ Pay Range: This posting is for a position covered by the Service Contract Labor Standards (SCA). The pay and benefits provided for this position will meet or exceed the minimum required amounts detailed in the wage determination issued by the Department of Labor and made applicable to this position, as incorporated into CACI's government contract for the work location. Minimum Required Hourly Wage: $23.58 There are a host of other factors that can influence final salary including, but not limited to, geographical location, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Responsibilities Join Peraton in advancing the safety, efficiency, and modernization of the National Airspace System (NAS) through the FAA's Brand New Air Traffic Control System (BNATCS) contract. As a trusted partner to the Federal Aviation Administration, Peraton helps deliver the systems and services that keep our nation's skies safe and connected. We're looking for innovative professionals who thrive in mission-critical environments and are passionate about shaping the future of air traffic management. This is your chance to make an impact on one of the world's most vital transportation infrastructures, working alongside leaders in aviation, engineering, data science, and systems integration. At Peraton, you won't just support the mission - you'll define it. As a Contracts Administrator Lead Associate, you will be responsible for the full lifecycle of contract management - from negotiation and proposal development to contract administration, compliance oversight and customer engagement. You will serve as a trusted advisor to program leadership, ensuring all contractual activities align with FAA objectives, company goals and policies, and legal requirements. Key Responsibilities: Oversee the full contract lifecycle, from initiation to closeout, ensuring smooth transitions and successful contract completions. Support proposal efforts by reviewing Request for Proposals (RFP), participating in RFP and proposal review meetings, contract pre-award meetings, conducting negotiations, and drafting/finalization of contract. Review, interpret, and resolve issues impacting company compliance and satisfaction of legal requirements. Provide support to internal program teams, to include highly complex problem solving, and providing creative solutions Serve as focal point for communication with program management, legal, finance, and other business disciplines to resolve issues and disputes. Manage contract change control processes to include reviewing Statements of Work (SOW) in collaboration with the program team and complex solicitations and non-routine proposals. Draft, review, and negotiate agreements, including Non-Disclosure Agreements (NDAs), Memorandums of Understanding (MOUs), and other business agreements. Support establishing associate contractor agreements (ACAs). Develop strong customer relationships, interacting frequently, and working as a team leader to resolve issues and streamline processes Qualifications Bachelor's Degree in Business Administration, Finance, or related field and at least 12 years of prime contract administration experience is required. 16+ years of experience may be considered in lieu of degree. U.S. citizenship with the ability to obtain and maintain a Public Trust clearance. Self-starter and independent worker with good organizational and computer skills Requires a working knowledge of industry business practices and the negotiation of prime contracts. Strong interpersonal, written and oral communication skills necessary for working in a team environment Thrive in a dynamic, cross-functional environment by working with diverse teams to address complex challenges and deliver innovative solutions. Experience working proposal responses to Request for Proposal (RFP), participating in RFP and proposal review meetings, contract pre-award meetings, conducting negotiations, and drafting/finalization of contract. Must be willing to travel to customer sites in Houston, TX and Forth Worth, TX areas. Desired Qualifications NCMA certified (CPCM, CFCM, CCMA) Deltek experience is a plus Proficient working within a Contract Lifecycle Management tool such as GovWin or UNISON Experience with cost plus award fee (CPAF) contracts Experience working with the FAA Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $104,000 - $166,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.

What success looks like in this role: • Serves as Field Engineer for specific clients and/or for specific products and applications, including tech kiosks / desks. • Provides software, hardware and networking support for desktops, laptops, servers, network devices, AV rooms and other networked devices. • Installs and maintains PCs and associated software, networks, servers, peripherals and other networked devices. • Supports network products from both operational and maintenance perspectives, including preventative maintenance activities. • Performs installs, moves, adds and changes as required. • Tests and certifies PCs, networks, servers and client approved applications. • Provides follow-up on problems or escalations. • Maintains a high degree of professionalism in actions, demeanor and dress. • Meets SLA requirements and ensures client satisfaction in all interactions. You will be successful in this role if you have: High School Diploma or GED required May require technical certification or Associate Degree Generally, 1-2years' experience in area of responsibility This role may require access to export-controlled commodities and technology. Therefore, to conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Unisys is proud to be an equal opportunity employer that considers all qualified applicants without regard to age, caste, citizenship, color, disability, family medical history, family status, ethnicity, gender, gender expression, gender identity, genetic information, marital status, national origin, parental status, pregnancy, race, religion, sex, sexual orientation, transgender status, veteran status or any other category protected by law. This commitment includes our efforts to provide for all those who seek to express interest in employment the opportunity to participate without barriers. If you are a US job seeker unable to review the job opportunities herein, or cannot otherwise complete your expression of interest, without additional assistance and would like to discuss a request for reasonable accommodation, please contact our Global Recruiting organization at *************************** or alternatively Toll Free: ************ (Prompt 4). US job seekers can find more information about Unisys' EEO commitment here.

Peoplesoft HCM Functional AnalystJob Category: Information TechnologyTime Type: Full time Minimum Clearance Required to Start: SecretEmployee Type: RegularPercentage of Travel Required: Up to 10%Type of Travel: Local* * * The Opportunity: CACI is making a significant impact to the Army by developing and integrating the Army's Integrated Personnel and Pay System-Army (IPPS-A). IPPS-A is the Army's future Web-based Human Resources (HR) solution to provide integrated HR capabilities across all Army Components. IPPS-A is designed to alleviate the Army's current reliance on 45 stove-piped HR systems that do not efficiently share information with one another. As a result of its implementation, IPPS-A will provide a centralized resource for Soldiers, Leaders, and HR Professionals to better manage personnel and pay information. Join us to be a part of this exciting and monumental effort. Once complete, IPPS-A will be the largest integrated personnel and pay system in the world! CACI is currently seeking a PeopleSoft HCM Functional Analyst for the IPPS-A program based in Crystal City, VA. You will provide expertise to ensure functional business requirements and process issues are resolved using comprehensive enterprise applications solutions. Work with senior managers to identify and solve functional area issues, design solutions, develop conceptual models, translate functional area requirements into technical requirements, and support design and implementation of enterprise application solutions (such as ERP). Provides future business strategies from a data or systems point of view. Analyze information system baseline and perform gap analysis between the baseline, user operational requirements, and the operating capability of products. Responsibilities: Elicit and document requirements and specifications from functional users and subject matter experts Translates customer requirements into a best fit within the application, and supports development of IPPS-A application, processes and documentation for the SDLC Develop and maintain standard systems requirement documents including but not limited to: business process workflows, Functional Requirements Documents; Requirement Traceability Matrix, and use cases Support application configuration and security setup as needed Implement complex enterprise system configurations and end to end development design Create business process models and identify business process improvements Review and comment on proposed functional/capability configuration for each of the product modules Evaluation and feedback on system and functional design documents, test plans and scenarios, and other associated artifacts Define test scenarios based on requirements; create test scripts to prove each scenario through system and user acceptance testing Ability to meet deadlines and manage multiple, dynamic priorities Effective communication skills and demonstrated experience working in a team-oriented environment Apply HCM knowledge and industry best practices in developing the to-be business processes and procedures Qualifications: Bachelor's degree in Computer Science or Information Systems or other technically relevant degree Versed in the design, implementation, test and deployment of PeopleSoft ERP HCM version 9.2 10+ years of experience implementing ERP solutions (including Workday, PeopleSoft, etc) with a minimum of five years of functional experience with PeopleSoft HCM 9.x Functional experience with one or more of the following PeopleSoft modules: HR Core, Profile Management, Base Benefits, Benefits Administration, Time and Labor, Talent Acquisition/Recruiting, Workflow and Self Service Must be a team player and be able to adjust to a dynamic working environment that supports a government agency Ability to communicate in a clear and concise manner and success working in Integrated Product Teams (IPTs) A Secret clearance is required to begin employment. For this position, CACI has the ability to provide clearance sponsorship for qualified individuals. Desired: Experience with PeopleSoft HCM 9.2 ERP implementation experience in large scale projects Must have strong written, verbal, and listening skills Must have strong analytical skills and can demonstrate strong problem solving skills This position is contingent on funding and may not be filled immediately. However, this position is representative of positions within CACI that are consistently available. Individuals who apply may also be considered for other positions at CACI. ________________________________________________________________________________________ What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. ________________________________________________________________________________________ Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $86,600 - $181,800 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

MANTECH seeks a motivated, career and customer-oriented **Material Handler** **Associate** to join our team in **Fort Worth, TX.** This is an **onsite** position. **Responsibilities include but are not limited to:** + Performing general warehouse tasks, preventative maintenance, refurbishing, shipping and receiving of Damage Control (Fire Fighting), Hazardous Material (HAZMAT), and Personal Protective Equipment (PPE). + Sorting equipment, applying labels, and assembling/disassembling protective equipment. + Reporting and recording accurate inventory of all Chemical, Biological and Radiological (CBR) assets processed daily, by use of established warehouse (WMS) and quality (QMS) management systems. + Performing quality assurance and quality control activities. + Performing visual/technical inspections of all CBR masks and equipment as trained and directed. + Assisting the Team Lead in all daily tasks and ensuring the completion of each assigned task. **Minimum Qualifications:** + High School Diploma + 1+ years of experience + Must possess basic knowledge of safety regulations and practices in an industrial/warehouse environment. **Preferred Qualifications:** + Experience using handheld scanners. + Experience working in a warehouse environment. **Clearance Requirements:** + Must be a U.S. Citizen and be willing and able to obtain a Secret security clearance. **Physical Requirements:** + The person in this position must be able to work on their feet for up to 8 hours a day in a non-climate controlled environment, and to be able to lift and handle material weighing up to 35 pounds. + Must be able to safely operate forklifts, mid-riders, pallet jacks and/ or other similar MHE devices. MANTECH International Corporation considers all qualified applicants for employment without regard to disability or veteran status or any other status protected under any federal, state, or local law or regulation. If you need a reasonable accommodation to apply for a position with MANTECH, please email us at ******************* and provide your name and contact information.

Essential Job Functions: * Manage and nurture client relationships, ensuring that solutions are tailored to meet client needs and drive long-term customer satisfaction. * Collaborate with cross-functional teams to support the delivery of solutions, focusing on profitable growth. * Provide support and mentorship to account executives and managers, helping them meet their targets. * Participate in the development and execution of account strategies, including identifying upsell and cross-sell opportunities. * Serve as a key point of contact for clients, offering insights and guidance as a trusted advisor. * Prepare and deliver client reports and proposals to highlight the value of our services. * Regularly analyze market dynamics and adjust account strategies accordingly. * Contribute to the organization's presence at industry events and conferences. Basic Qualifications: * Bachelor's degree in a relevant field or equivalent combination of education and experience * Typically, 8+ years of relevant work experience in industry, with a minimum of 3+ years in a similar role * Demonstrated success in account leadership roles, achieving sales and revenue targets and nurturing client relationships * Strong leadership and strategic planning abilities, effective communication skills, and a history of driving business growth * A continuous learner that stays abreast with industry knowledge and technology Other Qualifications: * An advanced degree in a relevant field is a plus * Relevant certifications such as Certified Account Manager (CAM) or Certified Strategic Account Manager (CSAM) are a plus At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We're committed to fostering an inclusive environment where everyone can thrive. **If you are an applicant from the United States, Guam, or Puerto Rico** DXC Technology Company (DXC) is an Equal Opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. View postings below . We participate in E-Verify. In addition to the posters already identified, DXC provides access to prospective employees for the **Federal Minimum Wage Poster, Federal Polygraph Protection Act Poster as well as any state or locality specific applicant posters** . To access the postings in the link below, select your state to view all applicable federal, state and locality postings. Postings are available in English, and in Spanish, where required. View postings below. Postings Link (****************************************************************************************************** **Disability Accommodations** If you are an individual with a disability, a disabled veteran, or a wounded warrior and you are unable or limited in your ability to access or use this site as a result of your disability, you may request a reasonable accommodation by contacting us via email (*****************) . Please note: DXC will respond only to requests for accommodations due to a disability. Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf. More information on employment scams is available here _._

BAE Systems, Inc. is looking for a highly motivated and driven software engineering intern to join our summer internship program for 2026. As a Software Engineer Technical Intern, you will join a team of engineers supporting software development opportunities that provide value to our customers and solve real world problems. Your contributions will play a crucial role in ensuring our partner's mission accomplishment and support the defense of our nation. The qualified candidate will design, develop, test and document Windows-based applications for various aircraft test and support equipment items. The qualified candidate will contribute to the development of instrument drivers, evaluation algorithms, Graphical User Interfaces, and self-test software. The qualified candidate will also interface with Systems and Hardware Engineering. A desire to work with hardware and knowledge of basic electrical hardware design is a plus. The qualified candidate will be involved in all phases of software development lifecycle including requirements definition, design, code, integration, and test. BAE Systems works with state-of-the-art technologies that will expand your software toolbox in a real-world Software Engineering environment. Your internship may include the opportunity to work with new client-based frameworks like REACT/AngularJS, new architectures like AWS, Azure, Rancher, Kubernetes, new server-side frameworks like GRADLE and SPRING, database implementations like SQL (Oracle, PostgreSQL, MySQL) and NOSQL(MongoDB, Allegrograph, Mark Logic, Redis, DynamoDB), and various other technologies. In addition to your program work, during your time as an intern you will be a part of our summer internship program. The program is set up to provide an opportunity for you to network with other interns, build relationships, and have fun! The intern program is led by one of our engineers who will provide mentoring and coaching throughout the summer. If you are looking for a challenge and are seeking a rewarding experience with the opportunity to make a difference, please consider joining out highly praised internship program for the summer of 2026. * Please note that pursuant to a government contract, this specific position requires US Person status Required Education, Experience, & Skills * Transitioning into Junior or Senior year during the Summer of 2026 or pursing a graduate degree * Majoring in one of the following programs: * Computer Engineering * Electrical Engineering * Computer Science * Software Engineering * Other coding related degree * Knowledge of Data Structures and Object Oriented Programming * Driven to learn and a passion for providing excellent products * Proficient in one of the following languages: * Java * C++ * C# * Python * JavaScript Preferred Education, Experience, & Skills Computer Engineer Major, Electrical Engineer Major that prefers to do software, or Computer Science Major who has experience working with electronics (like robotics or Arduino development, etc.). The Intern needs to be familiar and comfortable working with hardware. The Intern will mainly work with control electronics. * Embedded Windows Operating System and Device Driver development * Signal measurement techniques and theory * Graphical User Interface design, including Windows Forms Pay Information Full-Time Salary Range: $46437 - $62721 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Join the BAE Systems F-35 Aircraft Health Management Integration team. The team undertakes high technology software development, data science and fleet tracking activities to maximize aircraft availability for the global F-35 fleet. This is an exciting and challenging time for the F-35 program as the fleet grows to over 2,000 aircraft in the next decade. You will assist in driving team wide integration of our business management activities and will work in a highly collaborative manner with the Integration Team lead to support the wider BAE SYSTEMS business in the US and UK. The Integration Team provides program/business management, driving continuous quality improvement with support to the Business Lead and Value Stream leads. A project management background and basic knowledge of quality management is critical for this role. Responsibilities include: + In support of the Integration Lead execute project/business management tasks to ensure timely and accurate information is presented at Business/Operations Reviews and in support of the Control Account Manager (CAM) + Supporting the Value Stream leads in developing Integrated Master Schedules across all contracts with clear identification of risks and dependencies + Coordinating bids and proposals for extension of current work and winning new work + Coordinating development of an integrated staffing plan across all contracts working closely with the Business Lead and Program Management Office + Working with the UK based team to integrate plans and schedules + Support the Value Stream leads in development of Risks, Issues and Opportunities + Embrace quality management principles and a continuous improvement mindset + In support of the Integration lead help develop a structured costed training program for the AHM team **Required Education, Experience, & Skills** + Bachelor's Degree and 6 years work experience or equivalent experience + Project Management skills including Earned Value and Control Account Management + Experience developing integrated schedules + Experience developing new business proposals + Microsoft Office, including Project and advanced features of Excel + Experience performing continuous improvement Excellent organization, communication, influencing and networking skills **Preferred Education, Experience, & Skills** + Experience with teams that operate Agile development methods, tools and behaviors + Awareness of the principles of Quality Management frameworks such as AS9100D, ISO9000 etc. Experience of integrating complex programs of work across multiple companies and geographical locations **Pay Information** Full-Time Salary Range: $105254 - $178931 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Aircraft Health Management Integration Engineer** **118686BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

Job Description Join the BAE SYSTEMS F-35 Aircraft Health Management team and lead our efforts in developing and delivering outstanding Structural Integrity Products and Services to the customer. You will lead a team of data analysis, software and systems engineers in the US. You will manage a team using advanced data analysis tools for fleet airframe usage tracking/reporting, delivery of formal contractual deliverable reports and the development of software used by our customer to assess in service usage of a number of high value mechanical and electrical systems on the aircraft. Working closely with Lockheed Martin you will be responsible for development and delivery of highly optimized output, whether data analysis products or software, within a governed Quality Management System. You will be responsible for managing the successful delivery of these products. You will carry out work within an Agile development and deployment framework. Relationship building, strategic thinking and vision are critical to the success of this role in identifying how we will deliver high quality but affordable products and services as the fleet grows exponentially and keeping our capabilities sold to the customer. Required Education, Experience, & Skills * Typically a Bachelor's Degree and 10 years work experience or equivalent experience * Knowledge of Data Analysis techniques as applied to large, imperfect datasets * Team management/leadership experience including staff recruitment, management of performance and career development * Track record of delivery to formal contractual milestones in a high pressure environment * Firm grasp of Project Management / Earned Value Management principles with demonstrated application in prior work * Ability to support bid and proposal development with sound rationale and a demonstrated record of securing business growth * Ability to manage and influence key external and internal stakeholders * Experience of quality management practices as applied to data analysis and/or software development (AS9100D or similar) * Experience in the application of Agile workflow methodologies * Demonstrated willingness to take on responsibilities outside the day job Preferred Education, Experience, & Skills * Knowledge of the Aircraft and Mechanical/Electrical Structural Integrity Programs * Aircraft maintenance practices and procedures * Software Engineering * Certified to a professional project management standard * Certified to an Agile methodology standard Pay Information Full-Time Salary Range: $133333 - $226667 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Intelligence & Security (I&S), based in McLean, Virginia, designs and delivers advanced defense, intelligence, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do-from intelligence analysis, cyber operations and IT expertise to systems development, systems integration, and operations and maintenance services. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats inspires us to push ourselves and our technologies to new levels. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Join BAE Systems' Air & Space Force Solutions and be part of a diverse team that solves complex technical challenges in manufacturing and production flow. The Weapons Storage and Security System (WS3), Vault Modernization Program (VMP), modernizes vaults at various locations worldwide, focusing on areas such as vault-unlock codes, diminishing manufacturing sources and material shortages, and maintenance capabilities. Key Objectives The project focuses on optimizing manufacturing and production flow to achieve efficient and secure vault modernization. Key objectives include: ● Developing and implement a streamlined design and review process to achieve contract milestones ● Implementing a Quality Management System (QMS) to ensure compliance with regulatory requirements ● Analyzing and optimizing production flow to identify areas for improvement and reduce costs The Role The Engineer Sr - Software will be responsible for leading the software engineering effort for the VMP, ensuring that all software components meet requirements and are properly integrated. Key Responsibilities: Develop and implement software engineering plans, procedures, and standards, including those related to NSA Certification and Nuclear Certification Coordinate with stakeholders to identify and meet software engineering requirements, including those related to VUMS, VMCS, and MDNS Analyze and assess software performance to identify areas for improvement, including those related to cyber-security and nuclear surety Develop and maintain software engineering documentation and databases, including those related to software design and testing Manage government Acquisition Category (ACAT) deliverables to meet acquisition timeline and major milestones (SRR, PDR etc…) What You'll Bring: A strong foundation in communication, collaboration, and adaptability, with a desire to learn and grow professionally in a fast-paced environment. You are a collaborator, able to work effectively with others to achieve common goals. You are a learner, with a desire to develop your skills and knowledge. You are customer-focused, with a basic understanding of customer needs and a commitment to delivering good service. You are detail-oriented, with an ability to follow established procedures and guidelines. You are flexible and adaptable, able to adjust to changing priorities and circumstances. Benefits As a VMP team member, you'll enjoy: ● A healthy work-life balance with flexible work arrangements ● Collaboration with a talented team ● Opportunities for growth and development ● Recognition for outstanding performance ● A competitive salary and benefits package ● Opportunities to travel to locations within and outside the United States Bachelor with 4+ years of experience or Masters with 2+ years of experience Experience with software systems engineering in a defense or aerospace program (ACAT) Strong analytical and problem-solving skills Experience with software engineering tools, including those related to software design and testing Must be able to obtain Secret (or higher) security clearance Capable of creating required engineering documentation using Microsoft Office Suite products including Word, PowerPoint, Excel, Project, and Access About BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Intelligence & Security (I&S), based in McLean, Virginia, designs and delivers advanced defense, intelligence, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do-from intelligence analysis, cyber operations and IT expertise to systems development, systems integration, and operations and maintenance services. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats inspires us to push ourselves and our technologies to new levels. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified. Experience in testing, commissioning and validation activities Experience with other Digital Engineering tools as applicalble Familiar with Department of Defense programs Project Management Professional Certification Benefits Information Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Intern Benefits: Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. Please note: Some benefits may be different for union employees that are governed by a collective bargaining agreement (CBA) or for positions covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA).