Screw machine operator job description

$125 Bonus paid weekly if you work 50 hours in a week!

Entry-Level Pay is $17+ / hour. Additional pay for skilled machinists is dependent on experience.

SUMMARY: Operates multiple spindle lathe type screw machines equipped with automatic indexing and feeding mechanisms to machine metal bar stock by performing the following duties.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Reads blueprint or job order for product specifications such as dimensions, tolerances, number of parts to be machined, and tooling instructions such as cutting speeds, feed rates, depth of cuts, and cutting tools to be used.
• Positions and secures specified collets, bushings, and stock pushers onto stock feeding mechanism and loads bar stock into feeding mechanism.
• Installs and adjusts specified cams, gears, and stops to control stock and tool movements at each station.
• Positions and secures tools in tool holders.
• Sets cutting speeds and feed rates.
• Moves controls to cycle machine through settings, stopping machine and adjusting tool positions and machine controls to allow for operating factors such as timing, clearance between moving parts, and chip removal.
• Starts machine, observes operation, and inspects first run and sample work piece to ensure machining conforms to specifications.
• Replaces worn tools.
• Operates bench grinder to sharpen tools.
• Carry out work according to safety policies, OSHA standards and ISO requirements.
• Machines metal materials.
• Must have basic math skills (add, subtract, multiply, divide, convert to decimals, read measuring instruments.

EDUCATION and/or EXPERIENCE

• High school diploma or general education degree (GED);
• or one to three months related experience and/or training
• or equivalent combination of education and experience.

HOURS:

• 1st Shift: 6:00am - 4:00pm (Monday to Thursday)
• 2nd Shift: 3:50pm - 3:05am (Monday - Wednesday); 3:50pm - 10:05pm (Thursday)
• $125 Bonus paid weekly if you work 50 hours in a week!

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually loud.

BENEFITS

Health, Dental, Vision, 401K, Paid Vacations, Paid Personal Time, Holiday Pay (Eligible Upon Hire), Flexible Spending Account, Company Paid Life Insurance & AD&D, Voluntary Life Insurance, Paid Uniforms, Paid Breaks, Reimbursement for Safety Shoes, Short & Long Term Disability, Tool Program, and more!

Why work with Herker Industries, Inc.?

In addition to offering competitive pay and benefits, we are committed to furthering the career development of our employees. We believe in providing training and career development opportunities for employees who demonstrate a strong work ethic, think creatively, and manage time and projects efficiently and safely.

A Winston-Salem manufacturer is looking for a screw machine operator to train early first shift, 6 a.m.-4:30 p.m. Monday-Friday, then move long-term to a 4 p.m.-3 a.m. shift or a 4:30 p.m.-5 a.m. shift

Operates assigned single spindle automatic screw machines to perform a limited range of rough and finish turning, facing, boring, drilling, reaming, tapping threading, forming, and similar machining operations.

Performs the job of automatic screw machine operator with assistance, when required, from Team Leader or Troubleshooter

Operates machines at correct feeds and speeds, following standard operating procedures, producing good pieces within acceptable quality control limits per drawings.

Receives direction from Team Leader or Set-Up Person and works from detailed machine parts drawings, machine manuals, specifications, tool charts and instructions.

As inspection of parts indicates removes, sharpens, and resets tools, makes machine adjustments as necessary. Sets up and assists in setup of the screw machine.

Prior to operating screw machines at start of shift, moves parts produced by previous shift, if necessary, away from machines for pickup by the Material Handler or Shipping & Receiving personnel for transportation to be cleaned.

Checks to see that there is sufficient bar stock in holder (tube) to proceed and that bar stock is correct for the parts ordered.

Turns on machine and produces parts. Checks first stick from each machine produced for adherence to quality specifications. If pieces do not pass inspection, shuts off machines, and makes adjustments as needed to produce good parts.

Keeps bar stock holder (tube) full to prevent any loss of productivity due to stock running out of stock.

Inspects and gauges parts as per manufacturing procedures. Notifies Team Leader or Troubleshooter if parts are falling outside of drawing tolerances, and unable to make necessary adjustments.

Detects and reports faulty operations, defective material and equipment, drawing discrepancies and other unusual conditions to Team Leader or Troubleshooter.

Maintains work place area in a neat and orderly condition on a daily basis, and performs a general machine and work area cleanup daily.
Oils and greases machine, replaces coolant, and replaces tooling as required.
Keeps machine free of chips.
Makes out time, production, and quality reports as necessary. Manually or electronically.
Collaborates with operators from other shifts to transmit and exchange Information pertinent to the work at hand.
Performs other duties as required.
Hours:

Training 6 a.m.-4:30 p.m. Monday-Friday, then moves long-term to a 4 p.m.-3 a.m. shift or a 4:30 p.m.-5 a.m. shift

Requirements:

Must be able to stand throughout an entire shift (8-12 hours).
Must be able to bend forward, stretching forward, reaching into machine as needed to perform aforementioned job duties.
Visual acuity to read micrometers, inspect small parts, and adjust tooling.
Must be able to lift up to forty (40) pounds, ten (10) times throughout an entire shift.
Occasional lifting up to seventy-five (75) pounds
Will start working day shift (6 a.m.-4:30 p.m.) and after training switch to night shift (4:30 p.m.-3 a.m.)
Qualifications:

High School Diploma or equivalent preferred
Some mechanical ability preferred

5:00am - 3:00pm

$18.00 per hour

Do you have Hydromat Screw Machine experience and are looking to build a long term career? This position is just what you need!

Screw Machine Operator Description

• Produces parts to required specifications by setting and operating conventional lathes, mills and other machinery
• Prepares machine for production including oiling the machine, starting and checking first part for possible defects.
• Replaces tooling and makes minor adjustments under necessary supervision.
• Ensures stock does not run out during production by inserting bar stock into spindles at end of machine.
• Checks parts after and during stock-up.
• Maintains operational status of machine by monitoring condition of assigned machine and reporting any needed repairs to the Maintenance Mechanic.
• Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations.
• Performs all other duties as assigned.

Top Perks

• Temp to Hire
• Great starting pay!
• Eligible to receive a $500 bonus after 30 days!

Requirements

• Ability to read, write, and communicate in English.
• General computer skills
• Basic mathematical knowledge
• Ability to utilize hand tools
• Must demonstrate safe working habits, the ability to follow directions and work with minimal supervision.
• Ability to work effectively in a team environment in a culturally diverse workplace.
• High School Diploma or GED

We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.

Apply now for consideration!