Senior analyst jobs in Macomb, MI - 571 jobs

The Senior NVH & Durability Analyst will perform Finite Element Analysis (FEA) to solve Noise, Vibration & Harshness (NVH) and durability problems to aid engineering in the upfront design of vehicle, aerospace, and amusement park ride structures. The Senior NVH & Durability Analyst will build FEA models and conduct Computer-Aided Engineering (CAE) analysis supported by sound engineering explanation and hand calculations. This position is located in Livonia, MI. Responsibilities: Build FEA models for various applications in the automotive, aerospace, and industrial segments using commercial software (MSC-NASTRAN, ABAQUS, and ANSYS Mechanical). Conduct CAE analysis independently using CAE tools. Support analysis with sound engineering explanation and hand calculations. Review results with lead engineer or supervisor and share with the customer. Recommend alternative analysis approaches and design solutions to meet the functional targets. Interface with customer to complete tasks with a high level of quality while meeting timelines. Contribute to existing and develop new analyses capability as part of continuous improvement. Maintain pertinent information in assigned location and perform data cleanup. Interact confidently and professionally with stakeholders at all levels. Learn different computer-aided engineering software packages quickly. Minimum Requirements: Bachelor of Science in Mechanical Engineering. Minimum 5 years of CAE (Computer-Aided Engineering) experience. Experience in modal, point mobility, and acoustic analysis. Experience in strength, stiffness and stress (including thermal) in linear and nonlinear (material and contact) domains. Experience in size, shape, and other optimization analysis using optimization tools. Strong fundamental knowledge in strength of materials and failure theory for metals and composites and vibration concepts. Strong aptitude in modeling and simulation with ability to solve engineering problems. Good understanding of kinematics, static, and dynamics. Advanced software skills in finite element pre-processors, solvers, and post-processors (Altair Hyperworks, ANSA & META, NASTRAN, ABAQUS, OPTISTRUCT, ANSYS, nCode) and Finite Element Method Fatigue (FEMFAT). Good verbal and written communication skills. Preferred Requirements: Master of Science in Mechanical Engineering specializing in structural dynamics and mechanics, Finite Element Analysis (FEA), or fatigue theory, noise and vibration, and 3 years of Computer-Aided Engineering (CAE) experience. Experience in advanced simulation tools such as Simcenter Amesim, and application in autonomous and electric vehicles. Experience with full vehicle ‘CAE to Test' correlation. Experience with performance optimization and trade-off evaluations for multi-body systems. Experience with suspension and powertrain integration into vehicles using CAE techniques. AI (Artificial Intelligence) and Machining Learning skills. Our Full-Time benefits include medical, dental, vision, life insurance, earned sick time, STD, LTD, 401K, tuition reimbursement, employee referral bonuses, paid vacation, and paid holidays. Roush is an EO employer - Veterans/Disabled and other protected categories. If you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at ************.

Role: Epic Beaker (DI) Analyst Duration: 3 months with extension highly likely Remote with some travel around the go live Summary: The Senior Systems Analyst - Data Innovations (DI) is responsible for the support, maintenance, and optimization of Data Innovations middleware solutions across multiple health systems. This role partners closely with laboratory, clinical, and IT teams to ensure reliable system performance, seamless integrations, and high-quality diagnostic data flow. The ideal candidate brings extensive hands-on DI experience, a strong understanding of laboratory workflows, and a collaborative mindset. This role includes on-call responsibilities and limited travel to support multiple sites within the health system portfolio. Responsibilites: DI support: Provide advanced support for Data Innovations (DI) middleware in a multi-health-system environment Configure, maintain, and troubleshoot DI interfaces, rules, and instrument connectivity Support system upgrades, patches, and enhancements Ensure system stability, performance, and data integrity Clinical and Technical Collaboration: Provide advanced support for Data Innovations (DI) middleware in a multi-health-system environment Configure, maintain, and troubleshoot DI interfaces, rules, and instrument connectivity Support system upgrades, patches, and enhancements Ensure system stability, performance, and data integrity On-call and Operational support: Participate in first-level on-call rotation (one week every 10 weeks) Participate in second-level on-call rotation (one week every 10 weeks) Respond to incidents, outages, and urgent system issues in a timely manner Assist with root cause analysis and long-term issue resolution Documentation and Continuous Improvement: Maintain system documentation, workflows, and support procedures Identify opportunities to improve system reliability, efficiency, and support models Mentor junior analysts and contribute to team knowledge sharing

The CAE Analyst II (NVH / Durability) will perform Finite Element Analysis (FEA) to solve NVH / Durability problems to aid engineering in the upfront design of automotive, aerospace, entertainment, and industrial segments. This individual will build FEA models and conduct Computer-Aided Engineering (CAE) analysis supported by sound engineering explanation and hand calculations. Essential Duties and Responsibilities: Build NVH / Durability models for various applications in the automotive, aerospace, and entertainment industries using commercial CAE tools such as Nastran, Abaqus / Optistruct / ANSYS. Run NVH / Durability simulations (Linear, Non-linear, Dynamic), postprocess results, and provide engineering solutions. Develop and present detailed reports during customer meetings. Develop Python scripts for workflow automation. Learn new CAE tools quickly. Manage analysis files according to company data-retention policies. Collaborate with various groups within the CAE department to enhance predictive accuracy and reduce development cycles. Able to execute projects with minimum guidance, including direct communication with customers, and develop effective design solutions utilizing CAE tools. Effectively handle more than one project simultaneously, ensuring timely and high-quality deliverables. Support new technology and process development. Education and Experience (required): Bachelor of Science in Mechanical or Aerospace Engineering with coursework in Finite Element Analysis, Strength of Materials, Mechanical behavior of metals, plastics & composites, Noise & Vibration. Experience in linear, non-linear & dynamic structural FEA modeling, analysis 1-3 years of NVH & Durability modeling experience in building FEA models using tools such as ANSA, Hypermesh Education and Experience (preferred): Master of Science or Ph.D. in Mechanical or Aerospace Engineering with coursework in Finite Element Analysis, Strength of Materials, Mechanical behavior of metals, plastics & composites, Noise & Vibration. Experience in writing process automation using python, or Excel VBA or C functions. U.S. Citizen or U.S. Permanent Resident allowing for International Traffic in Arms Regulations (ITAR) compliance. Experience in performing analysis of complex full vehicle models. Skills, Knowledge and Abilities (required): Knowledge of mechanical systems, vehicle structure for various load cases & principles for NVH & Durability development for various systems. Good attention to detail and ability to use hand calculations and free body diagrams to validate input and results. Ability to communicate verbal and written technical information. Excellent problem-solving ability. Take initiative to research solutions when dealing with new problems. Software skills in finite element pre-processors, solvers, and post-processors (Altair Hyperworks, ANSA & META). Skills, Knowledge and Abilities (preferred): Familiarity with FEA/ fatigue simulation software packages (Nastran, Abaqus, nCode etc.) Software skills in finite element pre-processors, and post-processors (Altair Hyperworks, ANSA & META). Experience with real-world data integration and experimental validation.

CAE Analyst II - Multi-Body Dynamics (MBD) Duration: 6-Month Contract The CAE Analyst II (Multi-Body Dynamics - MBD) will perform advanced multi-body dynamic simulations to solve real-world engineering problems across the automotive, aerospace, entertainment, and industrial sectors. This role involves building dynamic models, running simulations, analyzing results, and presenting findings to internal customers. Key Responsibilities Build multi-body dynamics (MBD) models using commercial CAE tools such as MSC ADAMS Run simulations to convergence, post-process results, and perform engineering analysis Generate detailed technical reports and support customer presentations Develop Python scripts to automate workflows and improve efficiency Quickly learn and apply new CAE tools and methodologies Manage analysis files per company data-retention policies Collaborate with cross-functional CAE teams to improve predictive accuracy and reduce development cycles Independently execute projects, including direct customer communication Manage multiple projects simultaneously while meeting quality and schedule requirements Support new technology and process development initiatives Required Education & Experience BS in Mechanical or Aerospace Engineering (Coursework in Kinematics, Dynamics, Vibrations, Numerical Methods required) Strong background in kinematics and dynamics modeling 1-3 years of multi-body dynamics (MBD) modeling experience Preferred Qualifications MS or PhD in Engineering, Physics, or Mathematics Experience with Excel VBA and C-based automation Required Skills & Knowledge Solid understanding of: Mechanical systems 2D & 3D mechanisms Automotive suspensions Vibration isolation principles Strong attention to detail with ability to validate results using hand calculations and free-body diagrams Excellent analytical and problem-solving skills Preferred Skills Proficiency with ADAMS, MATLAB, SIMPACK, or similar MBD tools Experience with full-vehicle MBD models Experience integrating real-world test data and performing experimental validation

Senior Financial Analyst Please ensure you read the below overview and requirements for this employment opportunity completely. Salary Range: $90,000 - $110,000 Employment Type: Full-Time About the Role We are seeking a highly analytical Senior Financial Analyst to join our team. This role will focus on providing financial insights, supporting strategic decision-making, and driving business performance through accurate forecasting and analysis. Key Responsibilities Develop and maintain financial models to support budgeting, forecasting, and long-term planning Analyze financial performance and prepare variance reports for management Provide actionable insights to improve profitability and operational efficiency Collaborate with cross-functional teams on strategic initiatives Assist in preparing presentations for senior leadership and stakeholders Ensure compliance with internal controls and corporate policies Support ad-hoc financial analysis and special projects Qualifications Bachelor's degree in Finance, Accounting, or related field (MBA preferred) 5+ years of experience in financial analysis or corporate finance Strong proficiency in Excel and financial modeling Experience with ERP systems and BI tools (e.g., SAP, Oracle, Power BI) Excellent analytical, problem-solving, and communication skills Ability to work independently and manage multiple priorities Why Join Us? Competitive salary range: $90,000 - $110,000 Comprehensive benefits package Opportunities for career growth and professional development Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual's skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs. With that said, as required by local law in geographies that require salary range disclosure, Vaco/Highspring notes the salary range for the role is noted in this job posting. The individual may also be eligible for discretionary bonuses, and can participate in medical, dental, and vision benefits as well as the company's 401(k) retirement plan. Vaco by Highspring values a diverse workplace and strongly encourages women, people of color, LGBTQ+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply. EEO Notice Vaco by Highspring is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race (including but not limited to traits historically associated with race such as hair texture and hair style), color, sex (includes pregnancy or related conditions), religion or creed, national origin, citizenship, age, disability, status as a veteran, union membership, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, political affiliation, or any other protected characteristics as required by federal, state or local law. Vaco by Highspring and its parents, affiliates, and subsidiaries are committed to the full inclusion of all qualified individuals. As part of this commitment, Vaco by Highspring and its parents, affiliates, and subsidiaries will ensure that persons with disabilities are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact . Vaco by Highspring also wants all applicants to know their rights that workplace discrimination is illegal . By submitting to this position, you agree that you will be giving Vaco by Highspring the exclusive right to present your as a candidate for the foregoing employment opportunity. You further agree that you have represented information about yourself accurately and have not affirmatively misrepresented your qualifications. You also agree to maintain as confidential, to the fullest extent permitted by law, any information you learn from Vaco by Highspring about the position and you will limit disclosure of information about the position only to the extent necessary to perform any obligations in furtherance of your application. In exchange, Vaco by Highspring agrees to exercise reasonable efforts to represent you through all solicitation, job screening and resume dispersal. Privacy Notice Vaco by Highspring and its parents, affiliates, and subsidiaries ("we," "our," or "Vaco by Highspring") respects your privacy and are committed to providing transparent notice of our policies. California residents may access Vaco by Highspring HR Notice at Collection for California Applicants and Employees here . Virginia residents may access our state specific policies here . Residents of all other states may access our policies here . Canadian residents may access our policies in English here and in French here . Residents of countries governed by GDPR may access our policies here . Pay Transparency Notice Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual's skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure. xevrcyc The individual may also be eligible for discretionary bonuses.

We are seeking a highly motivated and detail-oriented Material Engineer to join our team. Reporting directly to the Trial Specialist, this role is critical in providing comprehensive technical support and coordination for various material and process trials. The successful candidate will be instrumental in evaluating trial proposals, assessing part suitability, and developing strategies to optimize trial efficiency, ultimately contributing to accelerated product development and manufacturing excellence. Materials SME to provide technical support and coordination Key Responsibilities: * Technical Support & Coordination: Serve as a primary technical resource, coordinating activities and providing essential support throughout the trial lifecycle. * Trial Proposal Evaluation: Conduct thorough evaluations of trial proposals, specifically focusing on aspects such as bond durability, Computer-Aided Engineering (CAE) analysis, hemming processes, joining techniques, and paint compatibility. * Part Suitability Assessment: Critically assess parts for their suitability in proposed trials, ensuring alignment with trial objectives and minimizing potential risks. * Trial Optimization & Planning: Develop strategic plans and guide part selection to minimize the number of required trials while ensuring comprehensive data collection and validation. * Cross-Functional Interface: Act as a key interface and technical liaison between Product Development (PD), Research & Innovation Center (RIC), Materials Engineering, Paint, and Supplier Technical Assistance (STA) teams to gather necessary technical support and insights. * Trial Status Monitoring: Support the TLTS Specialist by attending trial meetings at the nine stamping facilities, tracking and providing regular updates (monthly or bi-weekly) on trial statuses and progress. Key Responsibilities: * Technical Support & Coordination: Serve as a primary technical resource, coordinating activities and providing essential support throughout the trial lifecycle. * Trial Proposal Evaluation: Conduct thorough evaluations of trial proposals, specifically focusing on aspects such as bond durability, Computer-Aided Engineering (CAE) analysis, hemming processes, joining techniques, and paint compatibility. * Part Suitability Assessment: Critically assess parts for their suitability in proposed trials, ensuring alignment with trial objectives and minimizing potential risks. * Trial Optimization & Planning: Develop strategic plans and guide part selection to minimize the number of required trials while ensuring comprehensive data collection and validation. * Cross-Functional Interface: Act as a key interface and technical liaison between Product Development (PD), Research & Innovation Center (RIC), Materials Engineering, Paint, and Supplier Technical Assistance (STA) teams to gather necessary technical support and insights. * Trial Status Monitoring: Support the TLTS Specialist by attending trial meetings at the nine stamping facilities, tracking and providing regular updates (monthly or bi-weekly) on trial statuses and progress.

The Subject Matter Expert for the Turbocharger and Supercharger Systems is responsible for the design, development, and technical leadership in the creation, validation, and release of turbochargers and superchargers, system coolant and oil feed and return lines, heatshields, etc. This includes all components associated with getting air into and out of the boosting hardware, cooling, lubrication, sealing, structural support, etc. for the turbocharger system. The role involves driving the design through all phases of the product lifecycle, including design concept, engineering validation, and production release through PPAP (Production Part Approval Process). Key Responsibilities: Design & Development: Lead the design of the Turbocharger or Supercharger System hardware, ducting and engine interfaces. Develop and refine the Turbocharger System for function, cost and quality, durability, NVH, etc. Support CAD modeling, FEA (Finite Element Analysis), and other design validation methods to ensure structural integrity and compliance with standards. Collaborate with other engineering teams (airflow, thermal, packaging) to integrate the turbocharger system. Release & Program Management: Manage design release activities from early concept through production, including the timely completion of B-Sample, C-Sample, X0, X1, X2, and X3 milestones. Own the Bill of Materials (BOM) and Engineering Change Notices (ECNs) for turbocharger components. Ensure all parts meet quality, cost, and timing requirements. Drive the Production Part Approval Process (PPAP) for turbocharger components, ensuring compliance with all regulatory and customer specifications. Coordinate with cross-functional teams, including manufacturing, suppliers, and quality, to ensure the successful release and implementation of designs. Technical Guidance & Problem Solving: Provide technical leadership and support during the development and production stages to resolve design issues, material selection challenges, and process-related problems. Lead DFMEA (Design Failure Mode and Effects Analysis) and other risk assessment activities to ensure design robustness and mitigate potential issues. Participate in the development of testing strategies for turbocharger components, including vibration, crash, and thermal testing. Cross-Functional Collaboration: Work closely with suppliers to ensure design feasibility, cost competitiveness, and manufacturability of turbocharger components. Collaborate with validation teams to define and implement validation testing, ensuring turbocharger components meet functional and performance metrics. Partner with vehicle integration teams to ensure proper fitment, safety, and integration of turbocharger components into the overall vehicle platform. Documentation & Reporting: Develop and maintain engineering documentation, including design specifications, drawings, test plans, and validation reports. Ensure that all technical documentation is up-to-date and aligns with program timelines and PPAP requirements. Report on project status, timelines, and risk assessments to senior management and stakeholders.

Job DescriptionIT Subject Matter ExpertEmployment Type: Full Time, Experienced level Department: Information Technology As an IT Subject Matter Expert (SME), for CGS, you will provide expertise in application and systems software to a variety of key stakeholders. You will undertake an analysis of complex hardware, software, and telecommunication systems in order to help define processes and procedures for use cases across departments. To do so, you will assist with and consult on the design, development, documentation, and delivery of standard operating procedures, presentations, and insight/training materials to a wide range of audiences. A successful candidate for this position must possess a high degree of technical experience and performance in situations requiring a broad range of knowledge and skills. CGS brings motivated, highly skilled, and creative people together to solve the government's most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Assess and, as necessary, re-define procedures and/or standards using your knowledge and best practices- Work with a wide range of key stakeholders and system users to enhance understanding of agency systems- Work with IT and Business experts to coordinate program goals, requirements, performance analysis, and innovation projects- Provide recommendations for improvements in the IT systems and other business ventures- Develop procedures, manuals, and other documentation for process and technology needs- Define how information systems may be upgraded or replaced- Support the operation and maintenance of complex IT systems Qualifications:- Bachelor's degree in Computer Science or related field - 5+ years' experience in OBIEE, Oracle Forms, and Oracle Reports- Must be a US Citizen - Must be able to obtain a clearance - Knowledge of data governance, data management, data modeling, data cleansing, data extraction and transformation, data analysis, data migration, data integration, and data mapping- 7+ years of experience with PL/SQL- Experience with Agile Methodology is highly desired - Experience with Data Analytics tools, (i.e.: ADVANA) is highly desired - Experience with a UNIX OS is highly desired - Experience with Java is highly desired- Experience with SFTO is highly desired - Experience with APEX is highly desired Our commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our clients' specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we've been growing our government contracting portfolio, and along the way, we've created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of meaningful government innovation!Explore additional job opportunities with CGS on our Job Board: ************************************* For more information about CGS please visit: ************************** or contact:Email: ******************* #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Subject Matter Expert will serve as the reference for High Voltage Power Electronics development & validation methods and practices. They will function as a technical leader within their team to mature the state of development & validation activities. This includes staying aware of industry trends, coaching, and development of standard operating procedures and best practices. This individual contributor will support multiple components and programs while leading continuous improvement initiatives. A qualified candidate will have a mix of hands-on testing experience and technical documentation writing experience within a relevant field. Major Job Elements / Responsibilities: Become the subject matter expert for all High Voltage Power Electronics development & validation methods and practices, with an emphasis on High Voltage Power Inverter Modules Author and publish various technical documents, e.g. standard operating procedures, validation specifications, etc. Author, review, and comprehend performance and durability requirements for High Voltage Power Inverter Modules Provide technical expertise and direction during DFMEA and DRBTR activities Help align the team with virtual engineering activities Be aware of relevant industry trends, standards, and regulations Be aware of field performance and failures for Stellantis High Voltage Power Electronics components, especially High Voltage Power Inverter Modules Mentor team members on best practices and effective problem solving Collect, process, and present typical engineering data, e.g. time-series data acquisition from physical testing Author incident reports via the Stellantis problem tracking system for product issues discovered during DVP&R activities Comprehend accelerated testing and reliability demonstration, perform related calculations Write work orders, purchase requests, etc. for outsourced testing and other procurement

We are seeking a highly motivated and detail-oriented Material Engineer to join our team. Reporting directly to the Trial Specialist, this role is critical in providing comprehensive technical support and coordination for various material and process trials. The successful candidate will be instrumental in evaluating trial proposals, assessing part suitability, and developing strategies to optimize trial efficiency, ultimately contributing to accelerated product development and manufacturing excellence. Qualifications: Education: Bachelor's degree in Engineering (e.g., Mechanical Engineering, Materials Science, Chemical Engineering, Manufacturing Engineering) or a related technical field. Experience: [Specify desired years, e.g., 2+] years of experience in an engineering role, preferably within an automotive manufacturing or R&D environment. Technical Acumen: Demonstrated understanding of manufacturing processes, material properties, and testing methodologies related to bond durability, CAE, hemming, joining, and paint compatibility. Analytical Skills: Strong analytical and problem-solving skills with the ability to evaluate complex technical data and proposals. Communication: Excellent verbal and written communication skills, with the ability to effectively communicate technical information to diverse audiences. Interpersonal Skills: Proven ability to collaborate effectively with cross-functional teams and build strong working relationships. Organizational Skills: Highly organized with strong project coordination and time management abilities. Travel: Ability to travel to various stamping facilities as required (monthly or bi-weekly). Preferred Qualifications: Experience with trial management systems or project management tools. Knowledge of Ford's product development and manufacturing processes. Key Responsibilities: Technical Support & Coordination: Serve as a primary technical resource, coordinating activities and providing essential support throughout the trial lifecycle. Trial Proposal Evaluation: Conduct thorough evaluations of trial proposals, specifically focusing on aspects such as bond durability, Computer-Aided Engineering (CAE) analysis, hemming processes, joining techniques, and paint compatibility. Part Suitability Assessment: Critically assess parts for their suitability in proposed trials, ensuring alignment with trial objectives and minimizing potential risks. Trial Optimization & Planning: Develop strategic plans and guide part selection to minimize the number of required trials while ensuring comprehensive data collection and validation. Cross-Functional Interface: Act as a key interface and technical liaison between Product Development (PD), Research & Innovation Center (RIC), Materials Engineering, Paint, and Supplier Technical Assistance (STA) teams to gather necessary technical support and insights. Trial Status Monitoring: Support the TLTS Specialist by attending trial meetings at the nine stamping facilities, tracking and providing regular updates (monthly or bi-weekly) on trial statuses and progress.

Must Have Technical/Functional Skills In-depth understanding of Aerospace and Defense industry Knowledge of relevant industry standards and regulations Experience in Data Driven Analysis and Critical thinking Experience in Design Thinking, Continuous Improvement (LEAN, Six Sigma, etc), Process Consulting Knowledge of Production Strategy, Supply Chain Strategy in A&D industry Hands-on experience in Process Consulting in A&D Manufacturing (Planning, Scheduling Optimization, Execution, Quality, Product development, Life-cycle data and records management,Procurement, Inventory & Warehouse) Hands-on Implementation Experience in one of the areas in Advanced Manufacturing (Robotics, Automation, Digital Thread, Digital Twin, IoT) Hands on Implementation Experience in one of AI based solutions is preferred Solid Knowledge in other areas (Robotics, Automation, Digital Thread, Digital Twin, MBSE, IoT, Data) Knowhow of Enterprise Applications (PLM, MES, ERP) Roles & Responsibilities 15+ years experience in Aerospace and Defense industry 8-10 years experience in consulting engagement Drive consultative approach to identify / hunt key business challenges and develop transformation vision for clients CXOs (only within our existing client base…) Drive A&D industry thought leadership Be the Process Consultant when supporting transformation opportunities across the A&D value chain (Product Development, Supply Chain & Manufacturing Operations, Sales, MRO; non-core functions like HR, IT transformation) Participate in development of strategic roadmap for clients to meet their organization goals Participate in delivery of transformational programs Participate in presentations and workshops with C-suite, Function Heads, Industry experts Work with high performing global consulting teams and service practices with a strong commitment to excellence in pursuit of helping our clients business performance, drive quality in TCS deliverables, and exhibit promptness to internal and external customers Generic Managerial Skills, If any Proven consulting background Dealing with Business CXO / Senior stakeholders of an organization Exposure in working with teams based in different geo and different time zones Ability to work both as "lone warrior" as well as "as a team player" Base Salary Range: $130,000 - $200,000 per annum TCS Employee Benefits Summary: Discretionary Annual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing. #LI-SV2 #LI-KUMARAN

Ford's Electric Vehicles, Digital and Design (EVDD) team is charged with delivering the company's vision of a fully electric transportation future. EVDD is customer-obsessed, entrepreneurial, and data-driven and is dedicated to delivering industry-leading customer experience for electric vehicle buyers and owners. You'll join an agile team of doers pioneering our EV future by working collaboratively, staying focused on only what matters, and delivering excellence day in and day out. Join us to make positive change by helping build a better world where every person is free to move and pursue their dreams. We are the movers of the world and the makers of the future. We get up every day, roll up our sleeves and build a better world -- together. At Ford, we're all a part of something bigger than ourselves. Are you ready to change the way the world moves? We are seeking a highly skilled and motivated HIL Subject Matter Expert to join our ADAS/Platform/Diagnostic validation team. In this role you will lead automation and HIL testing efforts for ADAS feature testing, low-level platform software and hardware on next-generation automotive platforms. You will bring up new features, develop test solutions in order to perform End-to-end feature validation, develop test cases based on ASTQB test methodologies and automate developed test case and execute developed test cases. You will be validating ADAS, diagnostic protocols, validate power-management and core platform functionality, and drive CI/CD integration to improve test velocity and quality. What you'll do... * Responsible for developing and bringing up test solutions, in order to perform end-2-end features validation. * Responsible for new feature bring up and system test validation of software components related to ADAS/AD, Diagnostics & Platform testing. * Responsible for performing GAP analysis, develop new test cases based on ASTQB test methodologies, automate those test cases & execute test cases to perform software validation across ECUs, focusing on ADAS/AD at system level on HIL. * Responsible for performing system architecture and the related validation tests on components. * Responsible for test plan creation, test execution, test reports review and feature validation tests while ensuring traceability to functional and performance requirements. Facilitate and align with cross-functional technical teams such as functional safety, feature teams, infotainment on the system level. * Responsible for performing testing on closed loop test benches and create bench level test cases using ECUTest / CAPL/ Python to increase efficiency, test repeatability contributing directly to reduce cost and improve final product quality. * Maintain test cases traceability against the system level feature requirements throughout the product development life cycle. Align and support SAFe processes and activities within functional areas such as System, Hardware and Safety * Responsible for Diagnostic testing, feature related fault injection testing and develop, execute the test cases to ensure the system and feature integrity. Triage and root cause the internal and customer fleet level parking features related issues. * Be responsible for test diagnostics and UDS protocol and fault test, Work on defining and executing software and hardware diagnostics test cases. Investigate root causes of component or system level DUT failure. Implement automated diagnostics testing (UDS/DoIP/K-Line), DTC validation, and DTC suppression/unmasking strategies where required. * Responsible for creating Roads and scenarios in dSPACE MotionDesk/ ModelDesk / Aurelion, should create ControlDesk Layout for feature testing and develop test automation in Python / ECUTest or equivalent HIL tools. * Author and maintain test cases, test data, and test artifacts (logs, traces, TestRail/Test Management entries) and ensure they are archived to artifact stores (e.g., JFrog). * Integrate test executions into CI/CD pipelines (Jenkins, GitLab CI) and automated job scheduling systems (CT/Jira or equivalent). Analyze test failures, perform root-cause investigations (software, hardware, network topology), and coordinate fixes with software, hardware, and supplier teams. Define and validate bench-level network topologies, bus routing, and power-modes required for reproducible testing. Drive continuous improvement initiatives to increase automation coverage and reduce redundant testing. We are seeking a highly skilled and motivated HIL Subject Matter Expert to join our ADAS/Platform/Diagnostic validation team. In this role you will lead automation and HIL testing efforts for ADAS feature testing, low-level platform software and hardware on next-generation automotive platforms. You will bring up new features, develop test solutions in order to perform End-to-end feature validation, develop test cases based on ASTQB test methodologies and automate developed test case and execute developed test cases. You will be validating ADAS, diagnostic protocols, validate power-management and core platform functionality, and drive CI/CD integration to improve test velocity and quality. What you'll do... * Responsible for developing and bringing up test solutions, in order to perform end-2-end features validation. * Responsible for new feature bring up and system test validation of software components related to ADAS/AD, Diagnostics & Platform testing. * Responsible for performing GAP analysis, develop new test cases based on ASTQB test methodologies, automate those test cases & execute test cases to perform software validation across ECUs, focusing on ADAS/AD at system level on HIL. * Responsible for performing system architecture and the related validation tests on components. * Responsible for test plan creation, test execution, test reports review and feature validation tests while ensuring traceability to functional and performance requirements. Facilitate and align with cross-functional technical teams such as functional safety, feature teams, infotainment on the system level. * Responsible for performing testing on closed loop test benches and create bench level test cases using ECUTest / CAPL/ Python to increase efficiency, test repeatability contributing directly to reduce cost and improve final product quality. * Maintain test cases traceability against the system level feature requirements throughout the product development life cycle. Align and support SAFe processes and activities within functional areas such as System, Hardware and Safety * Responsible for Diagnostic testing, feature related fault injection testing and develop, execute the test cases to ensure the system and feature integrity. Triage and root cause the internal and customer fleet level parking features related issues. * Be responsible for test diagnostics and UDS protocol and fault test, Work on defining and executing software and hardware diagnostics test cases. Investigate root causes of component or system level DUT failure. Implement automated diagnostics testing (UDS/DoIP/K-Line), DTC validation, and DTC suppression/unmasking strategies where required. * Responsible for creating Roads and scenarios in dSPACE MotionDesk/ ModelDesk / Aurelion, should create ControlDesk Layout for feature testing and develop test automation in Python / ECUTest or equivalent HIL tools. * Author and maintain test cases, test data, and test artifacts (logs, traces, TestRail/Test Management entries) and ensure they are archived to artifact stores (e.g., JFrog). * Integrate test executions into CI/CD pipelines (Jenkins, GitLab CI) and automated job scheduling systems (CT/Jira or equivalent). Analyze test failures, perform root-cause investigations (software, hardware, network topology), and coordinate fixes with software, hardware, and supplier teams. Define and validate bench-level network topologies, bus routing, and power-modes required for reproducible testing. Drive continuous improvement initiatives to increase automation coverage and reduce redundant testing.

The Subject Matter Expert will serve as the reference for High Voltage Power Electronics development & validation methods and practices. They will function as a technical leader within their team to mature the state of development & validation activities. This includes staying aware of industry trends, coaching, and development of standard operating procedures and best practices. This individual contributor will support multiple components and programs while leading continuous improvement initiatives. A qualified candidate will have a mix of hands-on testing experience and technical documentation writing experience within a relevant field. Major Job Elements / Responsibilities: Become the subject matter expert for all High Voltage Power Electronics development & validation methods and practices, with an emphasis on High Voltage Power Inverter Modules Author and publish various technical documents, e.g. standard operating procedures, validation specifications, etc. Author, review, and comprehend performance and durability requirements for High Voltage Power Inverter Modules Provide technical expertise and direction during DFMEA and DRBTR activities Help align the team with virtual engineering activities Be aware of relevant industry trends, standards, and regulations Be aware of field performance and failures for Stellantis High Voltage Power Electronics components, especially High Voltage Power Inverter Modules Mentor team members on best practices and effective problem solving Collect, process, and present typical engineering data, e.g. time-series data acquisition from physical testing Author incident reports via the Stellantis problem tracking system for product issues discovered during DVP&R activities Comprehend accelerated testing and reliability demonstration, perform related calculations Write work orders, purchase requests, etc. for outsourced testing and other procurement

IT Subject Matter ExpertEmployment Type: Full Time, Experienced level Department: Information Technology As an IT Subject Matter Expert (SME), for CGS, you will provide expertise in application and systems software to a variety of key stakeholders. You will undertake an analysis of complex hardware, software, and telecommunication systems in order to help define processes and procedures for use cases across departments. To do so, you will assist with and consult on the design, development, documentation, and delivery of standard operating procedures, presentations, and insight/training materials to a wide range of audiences. A successful candidate for this position must possess a high degree of technical experience and performance in situations requiring a broad range of knowledge and skills. CGS brings motivated, highly skilled, and creative people together to solve the government's most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Assess and, as necessary, re-define procedures and/or standards using your knowledge and best practices- Work with a wide range of key stakeholders and system users to enhance understanding of agency systems- Work with IT and Business experts to coordinate program goals, requirements, performance analysis, and innovation projects- Provide recommendations for improvements in the IT systems and other business ventures- Develop procedures, manuals, and other documentation for process and technology needs- Define how information systems may be upgraded or replaced- Support the operation and maintenance of complex IT systems Qualifications:- Bachelor's degree in Computer Science or related field - 5+ years' experience in OBIEE, Oracle Forms, and Oracle Reports- Must be a US Citizen - Must be able to obtain a clearance - Knowledge of data governance, data management, data modeling, data cleansing, data extraction and transformation, data analysis, data migration, data integration, and data mapping- 7+ years of experience with PL/SQL- Experience with Agile Methodology is highly desired - Experience with Data Analytics tools, (i.e.: ADVANA) is highly desired - Experience with a UNIX OS is highly desired - Experience with Java is highly desired- Experience with SFTO is highly desired - Experience with APEX is highly desired Our commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our clients' specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we've been growing our government contracting portfolio, and along the way, we've created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of meaningful government innovation!Explore additional job opportunities with CGS on our Job Board: ************************************* For more information about CGS please visit: ************************** or contact:Email: ******************* #CJ

The Subject Matter Expert will serve as the reference for High Voltage Power Electronics development & validation methods and practices. They will function as a technical leader within their team to mature the state of development & validation activities. This includes staying aware of industry trends, coaching, and development of standard operating procedures and best practices. This individual contributor will support multiple components and programs while leading continuous improvement initiatives. A qualified candidate will have a mix of hands-on testing experience and technical documentation writing experience within a relevant field. Major Job Elements / Responsibilities: * Become the subject matter expert for all High Voltage Power Electronics development & validation methods and practices, with an emphasis on High Voltage Power Inverter Modules * Author and publish various technical documents, e.g. standard operating procedures, validation specifications, etc. * Author, review, and comprehend performance and durability requirements for High Voltage Power Inverter Modules * Provide technical expertise and direction during DFMEA and DRBTR activities * Help align the team with virtual engineering activities * Be aware of relevant industry trends, standards, and regulations * Be aware of field performance and failures for Stellantis High Voltage Power Electronics components, especially High Voltage Power Inverter Modules * Mentor team members on best practices and effective problem solving * Collect, process, and present typical engineering data, e.g. time-series data acquisition from physical testing * Author incident reports via the Stellantis problem tracking system for product issues discovered during DVP&R activities * Comprehend accelerated testing and reliability demonstration, perform related calculations * Write work orders, purchase requests, etc. for outsourced testing and other procurement Basic Qualifications: * Bachelor's degree in Engineering or related degree field * 8 or more years of relevant professional experience * English fluency, both written and verbal * Demonstrated expert-level technical report writing ability * Proficiency with Microsoft Office products, including intermediate to advanced Excel, PowerPoint, Outlook, and Teams or SharePoint * Knowledge of DVP&R, DRBTR, and DFMEA creation & execution * Knowledge of High Voltage Power Electronics devices and construction, especially High Voltage Power Inverter Modules * Be available full-time, on-site at the CTC location in Auburn Hills, MI Preferred Qualifications: * Master of Science Degree in Engineering * 10 or more years of relevant professional experience * Previous experience working DVP&R activities for High Voltage Power Electronics, especially High Voltage Power Inverter Modules * Previous experience authoring and managing technical specification documents * Previous Design Release Engineering experience * Previous EOL definition experience * Previous experience working in the automotive industry * Knowledge of typical laboratory test equipment including digital multi-meters, oscilloscopes, hi-pot testers, low and high voltage power supplies, coolant conditioning units, electric motor dynamometer, ETAS-based data acquisition systems * Experience with source control methods for documentation

Ford's Electric Vehicles, Digital and Design (EVDD) team is charged with delivering the company's vision of a fully electric transportation future. EVDD is customer-obsessed, entrepreneurial, and data-driven and is dedicated to delivering industry-leading customer experience for electric vehicle buyers and owners. You'll join an agile team of doers pioneering our EV future by working collaboratively, staying focused on only what matters, and delivering excellence day in and day out. Join us to make positive change by helping build a better world where every person is free to move and pursue their dreams. You'll have... Bachelor's degree in Electrical Engineering, Computer Science, or related field (or equivalent experience). 8+ years of experience in test automation for embedded /automotive systems, with demonstrable experience in ADAS or Chassis /PT domain or System HIL end to end feature testing. 5+ years of hands-on experience with System HIL's (dSPACE SCALEXIO, VEOS, MotionDesk, ModelDesk or equivalent) and ECUTest (or similar test tools). Strong knowledge of automotive communication protocols: CAN (11/29 bit), LIN, FlexRay, Ethernet, UDS, DoIP, and diagnostic tooling. 5+ years of proficiency with Python scripting to perform various automated tasks like test case execution, monitoring the vehicle level data for KPI testing. Experience debugging, testing and bringing up complex hardware/software systems 3+ years of experience in conducting TDRs for new test solutions, leading test-case reviews as well as test-automation reviews. Hands on experience in bringing up new features, design and deploy test solutions in order to perform end-to-end feature testing. Even better, you may have... Experience in Agile methodologies and the ASPICE (Automotive SPICE) framework, including applying ASPICE process areas to software development lifecycles and collaborating within iterative, multidisciplinary teams. Experience in efficiently developing and executing validation test plans to cover various configurations applicable to the system. Experience building and maintaining automated test frameworks, CI/CD integration (Jenkins/GitLab CI), and artifact management (JFrog, Nexus). Familiar with test management and reporting tools (TestRail, Jira) and log analysis tools (CANalyzer, Vector tools). Strong debugging and root-cause analysis skills across hardware/software boundaries. Knowledge of virtualization (VEOS/virtual ECUs) and bus virtualization/routing approaches. Familiarity with safety/functional-safety concepts (ISO 26262) and automotive development lifecycle. You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including: • Immediate medical, dental, vision and prescription drug coverage • Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more • Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more • Vehicle discount program for employees and family members and management leases • Tuition assistance • Established and active employee resource groups • Paid time off for individual and team community service • A generous schedule of paid holidays, including the week between Christmas and New Year's Day • Paid time off and the option to purchase additional vacation time. This position is a salary grade 8. For more information on salary and benefits, click here: ***************************** Visa sponsorship is not available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. This position is hybrid. Candidates who are in commuting distance to a Ford hub location may be required to be onsite four or more days per week. #LI-Hybrid #LI-MG3 We are seeking a highly skilled and motivated HIL Subject Matter Expert to join our ADAS/Platform/Diagnostic validation team. In this role you will lead automation and HIL testing efforts for ADAS feature testing, low-level platform software and hardware on next-generation automotive platforms. You will bring up new features, develop test solutions in order to perform End-to-end feature validation, develop test cases based on ASTQB test methodologies and automate developed test case and execute developed test cases. You will be validating ADAS, diagnostic protocols, validate power-management and core platform functionality, and drive CI/CD integration to improve test velocity and quality. What you'll do... Responsible for developing and bringing up test solutions, in order to perform end-2-end features validation. Responsible for new feature bring up and system test validation of software components related to ADAS/AD, Diagnostics & Platform testing. Responsible for performing GAP analysis, develop new test cases based on ASTQB test methodologies, automate those test cases & execute test cases to perform software validation across ECUs, focusing on ADAS/AD at system level on HIL. Responsible for performing system architecture and the related validation tests on components. Responsible for test plan creation, test execution, test reports review and feature validation tests while ensuring traceability to functional and performance requirements. Facilitate and align with cross-functional technical teams such as functional safety, feature teams, infotainment on the system level. Responsible for performing testing on closed loop test benches and create bench level test cases using ECUTest / CAPL/ Python to increase efficiency, test repeatability contributing directly to reduce cost and improve final product quality. Maintain test cases traceability against the system level feature requirements throughout the product development life cycle. Align and support SAFe processes and activities within functional areas such as System, Hardware and Safety Responsible for Diagnostic testing, feature related fault injection testing and develop, execute the test cases to ensure the system and feature integrity. Triage and root cause the internal and customer fleet level parking features related issues. Be responsible for test diagnostics and UDS protocol and fault test, Work on defining and executing software and hardware diagnostics test cases. Investigate root causes of component or system level DUT failure. Implement automated diagnostics testing (UDS/DoIP/K-Line), DTC validation, and DTC suppression/unmasking strategies where required. Responsible for creating Roads and scenarios in dSPACE MotionDesk/ ModelDesk / Aurelion, should create ControlDesk Layout for feature testing and develop test automation in Python / ECUTest or equivalent HIL tools. Author and maintain test cases, test data, and test artifacts (logs, traces, TestRail/Test Management entries) and ensure they are archived to artifact stores (e.g., JFrog). Integrate test executions into CI/CD pipelines (Jenkins, GitLab CI) and automated job scheduling systems (CT/Jira or equivalent). Analyze test failures, perform root-cause investigations (software, hardware, network topology), and coordinate fixes with software, hardware, and supplier teams. Define and validate bench-level network topologies, bus routing, and power-modes required for reproducible testing. Drive continuous improvement initiatives to increase automation coverage and reduce redundant testing.

Must Have Technical/Functional Skills * In-depth understanding of Aerospace and Defense industry * Knowledge of relevant industry standards and regulations * Experience in Data Driven Analysis and Critical thinking * Experience in Design Thinking, Continuous Improvement (LEAN, Six Sigma, etc), Process Consulting * Knowledge of Production Strategy, Supply Chain Strategy in A&D industry * Hands-on experience in Process Consulting in A&D Manufacturing (Planning, Scheduling Optimization, Execution, Quality, Product development, Life-cycle data and records management, Procurement, Inventory & Warehouse) * Hands-on Implementation Experience in one of the areas in Advanced Manufacturing (Robotics, Automation, Digital Thread, Digital Twin, IoT) * Hands on Implementation Experience in one of AI based solutions is preferred * Solid Knowledge in other areas (Robotics, Automation, Digital Thread, Digital Twin, MBSE, IoT, Data) * Knowhow of Enterprise Applications (PLM, MES, ERP) Roles & Responsibilities * 15+ years' experience in Aerospace and Defense industry * 8-10 years' experience in consulting engagement * Drive consultative approach to identify / hunt key business challenges and develop transformation vision for clients CXOs (only within our existing client base…) * Drive A&D industry thought leadership * Be the Process Consultant when supporting transformation opportunities across the A&D value chain (Product Development, Supply Chain & Manufacturing Operations, Sales, MRO; non-core functions like HR, IT transformation) * Participate in development of strategic roadmap for clients to meet their organization goals * Participate in delivery of transformational programs * Participate in presentations and workshops with C-suite, Function Heads, Industry experts * Work with high performing global consulting teams and service practices with a strong commitment to excellence in pursuit of helping our clients business performance, drive quality in TCS deliverables, and exhibit promptness to internal and external customers Generic Managerial Skills, If any o Proven consulting background o Dealing with Business CXO / Senior stakeholders of an organization o Exposure in working with teams based in different geo and different time zones o Ability to work both as "lone warrior" as well as "as a team player" Base Salary Range: $130,000 - $200,000 per annum TCS Employee Benefits Summary: Discretionary Ann ual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing. #LI-SV2 #LI-KUMARAN

The Subject Matter Expert (SME) is responsible for the development and validation of electric vehicle power electronics and electrified vehicle systems/devices for passenger cars and trucks. The candidate will develop power electronic devices DVP & R, define and carry out all required development/validation testing to ensure achievement of all functional objectives, and assure compliance to program goals and participate in supplier assessments and post-test inspection reviews, including detailed failure analysis and will work closely with the chosen suppliers and manufacturing entities to ensure designs are robust to customer requirements, meet exact function, and are manufactured without defect, will test finished product for quality purposes and recommends changes to product specifications as necessary. The candidate will also define and carry out all required bench development/validation testing to ensure achievement of all functional objectives and assure compliance to program goals per Global requirements and will develop common best practices globally for all the Power Electronics Charging System component commodities. The candidate will also mentor and train Development Engineers in Power Electronics hardware design topology, analyze projects to ensure projects achieve best practice performance, drive for strategies that meet regulatory requirements while working with the quality department to define hardware limits and/or component test cycle creation for ED/DV/PV testing, will keep up-to-date with best practices across the industry and work to implement these practices across global Stellantis applications, will recommend Power Electronics strategies and technologies to meet future global requirements, Lead technical problem solving to find technical solutions to systemic challenges during DVP & R development, work to improve methods and processes to make component development more efficient through the use of virtual hardware development, work with the quality department to identify top issues and develop countermeasures urgently and will provide expert technical support for production-launch engineers and consultations for technical leadership for the Center of Excellence teams. Essential Duties and Responsibilities: Technical Responsibility: Contribute to the Global Technical Area (GTA) strategy and lead in the capability growth of the engineering team Support and develop Technical Area (TA) core competencies Support and contribute to knowledge base of internal and external best practices Lead benchmarking studies and contribute to the benchmark knowledgebase Propose and lead advanced development topics within the GTA Propose continuous improvement opportunities to level up team skills, qualifications, tools and processes Lead design proposals with set based engineering principles Lead designs with 6 Sigma design principles Lead complex problem solving with cross functional teams Project Planning, Target Achievement, Monitoring & Reporting: Employ technical expertise to lead the engineering development of one or more projects Lead and support the project team(s) engineering in achieving project objectives, performance and cost requirements, and timing milestones Lead external support, services and resources supporting the project engineering development Responsible for work development packages assigned to third parties Confirm FRD requirements and project performance targets and assure the targets are achievable Confirm project cost and timing targets and assure the targets are achievable Support the Chief Engineer (CE) and contribute to the project resource planning, budget development, and status reporting Responsible to monitor the SW releases of each of the project development programs on time per the FROP (Feature Roll up Plan) Responsible for meeting the serial production tact, First Time Quality (FTQ) and ergo targets Responsible for meeting market region regulations, FMVSS, ECE, HV Charging Global Standards, etc. Confirm the Design Verification Plan and Report (DVP&R) comprehends all project targets and is complete Confirm the project Design Failure Mode and Effects and Analysis (DFMEA) comprehends all product risks and product usage cases Manage project TA according to the agreed head count, budget, and outside service or support plan Project Related Interface: Support and Promote Project and Operations Collaboration Lead global development touchpoint and milestone meetings Collaborate with Advanced Manufacturing Engineering (AME) to assure production feasibility Collaborate with all cross functions to make complex decisions Collaborate with the Global Technical Area Head (GTAH) to assure concurrent best practice sharing Collaborate with the other project GTAs Employee Related Tasks: Ensure cooperation with all areas within the engineering and request the required frame conditions Ensure cooperation with project management Ensure cooperation with all other groups within the area Secure knowledge of development tools within the group Ensure training of employees according to the required skills Escalate problems at the earliest time with the appropriate team members Special Knowledge / Skills: Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project) Computer knowledge and skills in CAD and CAE simulation preferred Six Sigma certification preferred Professional Communication skills (written and verbal) Physical Demands / Work Environment: Normal amount of sitting or standing, average mobility to move around an office environment, able to conduct normal amount of work at a computer

The Subject Matter Expert (SME) is responsible for the development and validation of electric vehicle power electronics and electrified vehicle systems/devices for passenger cars and trucks. The candidate will develop power electronic devices DVP & R, define and carry out all required development/validation testing to ensure achievement of all functional objectives, and assure compliance to program goals and participate in supplier assessments and post-test inspection reviews, including detailed failure analysis and will work closely with the chosen suppliers and manufacturing entities to ensure designs are robust to customer requirements, meet exact function, and are manufactured without defect, will test finished product for quality purposes and recommends changes to product specifications as necessary. The candidate will also define and carry out all required bench development/validation testing to ensure achievement of all functional objectives and assure compliance to program goals per Global requirements and will develop common best practices globally for all the Power Electronics Charging System component commodities. The candidate will also mentor and train Development Engineers in Power Electronics hardware design topology, analyze projects to ensure projects achieve best practice performance, drive for strategies that meet regulatory requirements while working with the quality department to define hardware limits and/or component test cycle creation for ED/DV/PV testing, will keep up-to-date with best practices across the industry and work to implement these practices across global Stellantis applications, will recommend Power Electronics strategies and technologies to meet future global requirements, Lead technical problem solving to find technical solutions to systemic challenges during DVP & R development, work to improve methods and processes to make component development more efficient through the use of virtual hardware development, work with the quality department to identify top issues and develop countermeasures urgently and will provide expert technical support for production-launch engineers and consultations for technical leadership for the Center of Excellence teams. Essential Duties and Responsibilities: Technical Responsibility: Contribute to the Global Technical Area (GTA) strategy and lead in the capability growth of the engineering team Support and develop Technical Area (TA) core competencies Support and contribute to knowledge base of internal and external best practices Lead benchmarking studies and contribute to the benchmark knowledgebase Propose and lead advanced development topics within the GTA Propose continuous improvement opportunities to level up team skills, qualifications, tools and processes Lead design proposals with set based engineering principles Lead designs with 6 Sigma design principles Lead complex problem solving with cross functional teams Project Planning, Target Achievement, Monitoring & Reporting: Employ technical expertise to lead the engineering development of one or more projects Lead and support the project team(s) engineering in achieving project objectives, performance and cost requirements, and timing milestones Lead external support, services and resources supporting the project engineering development Responsible for work development packages assigned to third parties Confirm FRD requirements and project performance targets and assure the targets are achievable Confirm project cost and timing targets and assure the targets are achievable Support the Chief Engineer (CE) and contribute to the project resource planning, budget development, and status reporting Responsible to monitor the SW releases of each of the project development programs on time per the FROP (Feature Roll up Plan) Responsible for meeting the serial production tact, First Time Quality (FTQ) and ergo targets Responsible for meeting market region regulations, FMVSS, ECE, HV Charging Global Standards, etc. Confirm the Design Verification Plan and Report (DVP&R) comprehends all project targets and is complete Confirm the project Design Failure Mode and Effects and Analysis (DFMEA) comprehends all product risks and product usage cases Manage project TA according to the agreed head count, budget, and outside service or support plan Project Related Interface: Support and Promote Project and Operations Collaboration Lead global development touchpoint and milestone meetings Collaborate with Advanced Manufacturing Engineering (AME) to assure production feasibility Collaborate with all cross functions to make complex decisions Collaborate with the Global Technical Area Head (GTAH) to assure concurrent best practice sharing Collaborate with the other project GTAs Employee Related Tasks: Ensure cooperation with all areas within the engineering and request the required frame conditions Ensure cooperation with project management Ensure cooperation with all other groups within the area Secure knowledge of development tools within the group Ensure training of employees according to the required skills Escalate problems at the earliest time with the appropriate team members Special Knowledge / Skills: Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project) Computer knowledge and skills in CAD and CAE simulation preferred Six Sigma certification preferred Professional Communication skills (written and verbal) Physical Demands / Work Environment: Normal amount of sitting or standing, average mobility to move around an office environment, able to conduct normal amount of work at a computer