Senior designer jobs in Birmingham, AL - 126 jobs

This position is responsible for creating design drawings in 2D or 3D for the Southern Company's Transmission and Distribution electrical Substations and supporting Southern Company's design criteria and standardization efforts. The Designer will produce engineering drawings using AutoCAD, AutoDesk 3D Inventor or Autodesk Map 3D (P4A), produce specifications and material requirements for substation projects with emphasis on safety, quality, scheduling, and costs. To further detail, the job responsibilities include the creation/modification of scaled 2D drawings and 3D models designing the physical aspects of electrical substations, including but not limited to Foundation Layouts, Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra ********************************* ***************

CDM Smith is an engineering and construction firm delivering legendary service, smart solutions for the environment and infrastructure, and an unmatched experience for our clients and employees. Our firm works with clients around the world to implement solutions to meet current and future needs. This role offers a unique opportunity to contribute to HVAC and plumbing design while also developing detailed energy models and conducting energy audits for large campus environments-such as manufacturing facilities, hospitals, and water systems. The focus is on sustainability, energy efficiency, renewable energy, and green building initiatives. At CDM Smith, we are invested in your success. We offer flexible work options that allow our employees to meet their needs outside of work. Sign-on bonus may be considered for the successful candidate. As a member of our Infrastructure and Services Group, you would contribute to CDM Smith's mission by: - Designing systems ranging from basic to highly complex to meet client needs. This includes HVAC master planning and studies, HVAC and plumbing systems, mechanical systems such as co-generation, and centralized energy systems. The role also involves implementing energy efficiency improvements for large campus environments-including manufacturing facilities, hospitals, and water systems-focused on sustainability, energy efficiency, renewable energy, and green building initiatives. - Performing other duties as required such as heating/cooling load calculations, duct/pipe sizing, equipment selections, system layouts, and coordination with other design disciplines. - Developing detailed energy models and Life Cycle Cost Analysis for various building types. - Performing Level 1 through 3 energy audits to assess energy consumption, evaluate HVAC performance, identify high-energy loads, and propose energy-saving measures. - Performing site surveys, developing equipment inventories, evaluating proposed energy efficiency measures, and recommending improvements. - Collaborating with sales staff to develop proposals in response to current and prospective client requests for proposals (RFPs). Reviewing draft proposals for adherence to firm, industry, state, local, and federal regulations and best practices. Engaging with existing and potential clients to review their current and future design needs. - Attending conferences, symposia, and similar events to enhance the visibility of the firm's products and services in coordination with relevant sales staff. - Provides technical guidance and training to more junior staff. Reviews the work of more junior staff. **Job Title:** HVAC Design Energy Analysis Modeling **Group:** ISO **Employment Type:** Regular **Minimum Qualifications:** - Bachelor's degree. - 7 years of related experience. - Equivalent additional directly related experience will be considered in lieu of a degree. - Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. **Preferred Qualifications:** - Experience working in a multi-disciplinary environment. - Ability to read building system engineering documents - Experienced with a variety of energy modeling software including eQuest and Trane 3D. - Certified Energy Manager **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. - Solid Knowledge of engineer principles of design. - Expert Knowledge of Microsoft business software (excel, word, etc.). - Excellent verbal and written communications skills. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $90,605 **Pay Range Maximum:** $158,579 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Looking for an opportunity to make an impact at a fast growing, investor-backed AI/ML company? This is an exciting opportunity with a fast-growing team at the cutting-edge intersection of AI/ML models, sensor fusion, and large datasets. You will be an integral part of a high-performing multi-disciplinary team developing innovative products from the ground up. Tocaro Blue is transforming maritime technology by modernizing legacy marine radar systems through innovative software solutions. Our flagship product, ProteusCore™, is an advanced software platform that integrates vessel Radar sensor data with artificial intelligence and machine learning models to deliver real-time situational awareness and support vessel autonomy systems. Role Summary We're seeking a creative and detail-oriented Graphic Designer to create compelling visual content across multiple platforms. You'll work closely with our marketing and product teams to develop designs that engage our audience and strengthen our brand identity. As our Graphic Designer, you'll conceptualize and execute visual designs for both digital and print media. You'll collaborate with cross-functional teams to understand project requirements and translate ideas into effective visual communications. Your work will span social media graphics, marketing materials, presentations, web assets, video production, and more. You'll maintain brand consistency across all touchpoints while finding creative ways to push our visual identity forward. The ideal candidate will have demonstrated experience distilling inherently complex and technical concepts into clear, compelling graphics and illustrations. Critically, this role demands the ability to create both expert-level technical diagrams and simplified illustrations for general audiences. All applicants should include a link to their personal portfolio and examples of creative work projects. Responsibilities: · Create high-quality, visually compelling designs across various media, including digital, print, and promotional materials. · Work collaboratively across the Tocaro Blue team to help iterate and conceptualize technical R&D concepts for internal sharing and socialization. · Quick iteration and responsiveness for creative and task requests. · Uphold and evolve the brand, ensuring consistency across all design materials. · Work closely with marketing, production, and executive teams to support campaigns, sales collateral, and special projects. · Track projects using project management software and utilize departmental scorecard to ensure accountability for meeting performance targets. · Handle multiple design projects and effectively prioritize tasks in a dynamic, fast-paced environment. · Comfortable receiving and applying feedback constructively and with a growth mindset · Values iteration and teamwork to continually improve the quality and impact of designs openly with cross-functional teams to evolve designs based on shared goals. · Comfortable with routine engagement to validate alignment on product vision · Approach creative challenges with innovative solutions that align with company objectives. Requirements: · Proficiency in Canva and Adobe Creative Suite (Photoshop, Illustrator, InDesign, Premier Pro, etc) or equivalent · A strong, diverse portfolio demonstrating experience in various design disciplines, preferably with automotive, marine, defense, or related industries. · Strong communication, time management, and adaptability skills; able to work both independently and within a team. · 3+ years of professional graphic design experience. · Bachelor's degree in Graphic Design, Visual Arts, or a related field. Nice to have: · Marine Industry experience · Defense Industry experience · Figma experience Compensation: · $60,000 - $80,000 salary, with potential for incentive equity compensation · 401(k) with matching (up to 4% of salary), Health, Dental, Vision, Life, Disability Insurance · Ability to work on US Government Contracts (typically limited to US Citizens) Equal Opportunity & Eligibility Tocaro Blue, LLC is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Individual offers are made based on skill and experience, geographic location, as well as role, responsibility, and leadership within the company, and other due diligence. Our hiring team will try to determine whether each candidate fits the job description and may choose, at their discretion, to redirect a candidate to another job offering that is more appropriate. All candidates for this role must be eligible to access sensitive information and items that requires “US Person status”, which is typically limited to U.S. citizens and legal permanent residents (a.k.a. green card holders), with few exceptions. Tocaro Blue LLC is not able to sponsor work visas nor permanent resident cards ("green cards") for this role.

Strengthening and empowering all of the communities we serve. Sr. Creative Designer Strategist Advance Local is building a centralized marketing team to support our agency brands focused on Healthcare, Travel & Tourism, Higher Education, and Recruitment marketing. We're looking for a Sr. Creative Designer Strategist to help turn complex ideas into clear, compelling B2B creative that drives demand and supports sales. If you enjoy blending strategy, design, and storytelling-and want your work to make a real business impact-this role could be a great fit. This position pays between$65,000.00 and$75,000.00 annually. What You'll Do You'll collaborate with our Creative Director and marketing teams to design and execute B2B campaigns across multiple brands and industries. Your work will span thought leadership, sales enablement, and campaign creative. You will: * Design and execute multi-channel B2B campaigns from concept through delivery * Turn data and complex topics into clear, engaging visual stories * Create assets like whitepapers, infographics, presentations, ads, animations, videos, emails, and blog visuals * Keep brands consistent across channels and formats * Build and maintain templates for decks, sales materials, and content layouts * Adapt creative for use across multiple formats and channels * Organize and manage digital creative assets * Stay current with design tools, trends, and best practices What You Bring * Bachelor's degree in design or equivalent experience * 5+ years of design experience, ideally in an agency or B2B environment * Strong skills in Adobe Creative Suite (Illustrator, InDesign, Photoshop) * Experience with Adobe Express, Premiere, Animate, WordPress, and PowerPoint * A portfolio that shows concept development, data visualization, and integrated campaigns * Understanding of responsive design, web standards, and print production * Clear communication and collaboration skills * Ability to manage deadlines, adapt to feedback, and stay organized * Comfort presenting work to teammates and stakeholders Nice to Have * Experience with HubSpot or marketing automation * Familiarity with HTML/CSS, Figma, Microsoft 365 * Interest in using AI tools in the creative process Why Advance Local? You'll work on a collaborative team supporting multiple national B2B brands. The role offers variety, ownership of your work, and the chance to see your creative directly support business growth across several industries.

Job Description Are we the road to your future? We are currently searching for an experienced East Gulf Alternative Delivery Roadway Design Lead to support transportation design projects in our Gulf Region. Located in Alabama or Tennessee OR willing to relocate to one of our offices in either state. To be considered for this position, applicants must have, at minimum, 20 years experience. What you'll be doing: Serve as a hands-on, project based, Roadway Lead for our East Gulf projects providing roadway discipline leadership, technical expertise, and roadway design production oversight Prepare roadway plan set components including plan, profile, cross section, and detail sheets Prepare specification packages Calculate quantities and prepare construction cost estimates Coordinate with clients and sub-consultants Develop and mentor roadway staff Coordinate with other engineering disciplines in a team environment What you need to have: Licensed PE (Alabama and/or Tennessee preferred) 20+/- years experience Experience with DOT's on Major Highway and Interstate projects Alternative Delivery design experience required Competent with MicroStation OpenRoad Design experience preferred Leadership and Team Building experience Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role Valid driver's license A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: Employee Stock Ownership Plan (ESOP) Medical, Dental, & Vision 401(k) retirement savings plan + employer matching Paid Time Off (PTO) and holidays Employer-Paid Life/AD&D insurance Employer-Paid short-term disability and long-term disability Wellness incentives Student Debt Retirement Match Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For nearly a century, Volkert has done meaningful work that improves our infrastructure and quality of life. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” - Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 TN AL

Job Title: Sr. Survey CAD Manager ***Work Location: Atlanta, GA *** Salary: Based on experience and will be discussed with manager in interview The Senior Survey CAD Manager position will be responsible for defining, implementing, and maintaining CAD standards for the company. Coordinate CAD needs with Project Managers / CAD Staff. The candidate must be detail oriented, work on multiple projects simultaneously, and thrive in a fast-paced environment. Duties/Responsibilities : Ensure that CAD Technicians are trained and follow established CAD standards Manage CAD software licenses and updates as well as CAD training Manage general QA/QC of CAD work performed by CAD Staff Processing of daily field survey data using Civil 3D/Carlson and/or MicroStation to develop finished survey drawings Development of 3D digital terrain models, based on field data, to be used for engineering design, utilizing InRoads/OpenRoads and similar software. Become familiar with CAD standards of various government agencies (i.e. GDOT) to make sure finished survey drawings are in compliance with standards. Occasional assistance in the field to confirm finished drawings are representative of field conditions and to further skills toward becoming a registered land surveyor. Coordinates with office staff and clients as required. Education/Experience: Associate Degree in Technical Drafting (Preferred) or Comparable 4 Year Degree 8+ years of experience in AutoCAD 5+ years of experience in land surveying 5+ years of managing Junior CAD Technician Experience with GDOT deliverables Excellent computer proficiency (MS Office - Word, Excel and Outlook) Must have a valid driver's license and be insurable Knowledge of business office procedures Benefits : Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.

Works closely together with CLP engineers and project managers to provide solutions that help separate CLP Systems in the market. Excellent service through our Design team is a top priority to our company and customers. Interprets the structural and architectural plans and understands concepts and applies them to CLP Systems' submittals. Responsibilities ▪ Read and interpret construction plans ▪ Review loading requirements and other specifications in CLP's design software ▪ Clean building layouts, review wall sections, and create cut section details in AutoCAD. ▪ Provide Bill of Materials and CLP drawing submittals used for product installation and EOR Review. ▪ Complete Revision submittals as needed to facilitate completion of projects ▪ Work with CLP engineering to ensure accurate and customer-friendly design. ▪ Communicate issues with the Project Management team for resolutions. ▪ Utilize Salesforce to facilitate scheduling process Qualifications ▪ Ability to work effectively in a high stress environment ▪ Excellent Verbal and written communication skills ▪ Proficient in Microsoft Excel, Word, Outlook ▪ Work effectively in a team environment as well as independently ▪ Customer service oriented, accountable, and proactive PREFERRED SKILLSET: ▪ REVIT and/or VBA experience is a plus ▪ Background in AutoCAD and Bluebeam Steel Dynamics, Inc., and all affiliated entities are equal opportunity employers. Coming Soon!!

The Residential Cabinet Sales & Design Manager is responsible for driving residential sales growth while overseeing cabinetry design, pricing, scheduling, and installation. This role blends relationship-based selling, design coordination, and project execution to deliver profitable, on-time projects and an exceptional customer experience. The focus of this job is making connections with people, motivating and inspiring them to achieve their goals and results. Poise and an engaging, empathetic communication style based on natural warmth and enthusiasm are the keys to achieving the objectives of this job. The work involves driving toward results by enrolling the commitment and buy-in of others. While the job requires strong initiative and self-direction, results are only achieved with and through people. A sincere appreciation for people and how they are each uniquely motivated is the foundation for designing and implementing interactive communication and decision-making processes. Knowledge and skill in successfully influencing and persuading others are essential, as understanding how their individual needs and motivations relate to their goals is crucial. The job requires a high degree of “selling”, whether of ideas and policies within the organization, or products or services in the marketplace. The job environment is fast-paced and results-oriented. While there is an urgency to achieving goals, responsibility for achieving results needs to be shared and effectively delegated when necessary. Initiating projects and processes beyond established organizational practices will often require training and developing others, as well as enlisting their support by using a “selling” rather than “telling” communication style. A self-assured, extroverted style that can enliven, engage, and have a positive impact on individuals and groups is essential. The job has a variety of tasks and is dynamic and changing. Because goals and desired results can quickly change, the job requires regularly meeting and proactively establishing relationships with new groups. The ability to understand, quickly react, and motivate others to adapt to the changing organizational environment is a critical key to success. In general, the core of this position requires a motivated and motivating team builder and organization developer. Job Characteristics Variety of activities Multiple projects occurring simultaneously Multi-tasking Sense of urgency for goal achievement Fast-paced environment People/relationships focus Team building Inspire, motivate others, and engage their commitment Involve others in the decision-making process Cooperative, collaborative decision-making Must assume responsibility for risk Extroverted, warm, enthusiastic, empathetic Stimulating communicator Persuasive “selling” style Collaborative approach Leadership based on the ability to motivate others Strong commitment to results Delegate authority readily Job Duties & Responsibilities Sales & Business Development Develop and grow a residential client base that includes builders, remodelers, homeowners, architects, and designers. Maintain and expand relationships with existing clients to drive repeat and referral business. Lead client meetings, present design solutions, and close sales aligned with margin targets. Design, Estimating, and Preconstruction Oversee cabinetry design, layout, and production selection to ensure accuracy, constructability, and client satisfaction. Prepare project estimates, pricing, and proposals consistent with company standards and profitability goals. Coordinate design approval and confirm specifications before releasing the order. Project Execution & Scheduling Develop project schedules and coordinate delivery, installation, and field activities to ensure timely completion and meet deadlines. Determine labor requirements and coordinate installers, delivery drivers, and field installation crews. Communicate schedule changes, conflicts, or scope revisions proactively to internal teams and clients to ensure timely updates. Quality, Compliance, and Close-Out Inspect projects to ensure compliance with plans, building codes, safety standards, and quality expectations. Address field issues, punch items, and warranty concerns through timely resolution. Leadership & Financial Management Coordinate with and support both inside and outside sales staff and designers, providing coaching, direction, and performance feedback. Manage and understand this role's P&L, tracking sales, margins, labor, and costs to ensure profitability. Collaborate with operations and leadership to improve processes, efficiency, and customer outcomes. Job Requirements & Qualifications A degree in a relevant field is a plus 3-5 years of previous experience in millwork, cabinetry, or construction is preferred 3-5 years of sales experience is preferred Strong project management and organizational skills Excellent communication and interpersonal skills

Current Employees and Contractors Apply HereOsaic Careers Operations Opportunity in Insurance Industry Case Designer, Highland Capital Brokerage Role Type: Full time Salary: $55,000 - $65,000 per year + Sales Incentive Compensation Actual compensation offered will be determined individually, based on a number of job-related factors, including location, skills, licensure, experience, and education. Our competitive compensation is just one component of Osaic's total compensation package. Additional benefits include health, vision, dental insurance, 401k, paid time away, volunteer days and much more. To view more details of what you can look forward to, visit our careers page: ******************************************* Summary: The Case Designer acts as a support partner for assigned Highland Sales Resources (both Signature Vice Presidents as well as those outside of the Signature channel). Case Designers work with their assigned Sales Resources to provide presale assistance including case design, product selection, illustrations, application fulfillment, etc. Case Designers also help maximize opportunities so that the field can focus on generating additional revenue by seeing more potential producers and clients. The position requires a sense of urgency and attention to detail to ensure services provided are prompt, accurate and meet all required compliance and Service Level Agreements guidelines. The Case Designer must also possess strong written and verbal communication skills to provide pertinent information on product recommendations, explanations as to why recommendations were made, as well as guidance regarding the application process, and strategies on how Highland can best support the producer. The Case Designer must be a team player with the ability to work closely with other job families that support the VP. The Case Designer must develop and maintain strong working relationships, primarily, with the VP's Case Development Associate and members of Case Management, Commissions Accounting, and Broker Contracting Teams as well. The Case Designer position reports jointly to the Sales Support Management Team and primarily to the Manager closest to his/her physical location. Education Requirements: Bachelor's degree preferred, high school diploma (or equivalent) in combination with significant practical experience will be considered in lieu of degree. Minimum of high school diploma or equivalent is required. Responsibilities: Analyze requests received and generate applicable proposals and presentations that are accurate, compliant, and meet necessary guidelines Deliver illustrations and presentations to the field with concise commentary explaining the need and the solution(s) recommended Provide analysis of in-force policy data and recommend changes and/or alternate plans when applicable Prepare new business application kits and pre-fill with accurate client information utilizing information received from the field Create and send DocuSign envelopes to electronically collect signatures from clients and or producers. Receive signed applications from the field and review for high-level accuracy before forwarding to New Business for processing Maintain broad knowledge of life insurance product landscape as it pertains to available products, carrier illustration software, marketing resources, sales ideas. Stays current on the competitive marketplace by participating in educational opportunities, attending webinars, etc. Fulfill requests for marketing materials, supplemental reports, etc. Facilitate the timely and accurate response to requests received. Including but not limited to: Requesting updates from New Business, Commissions, or Broker Contracting teams Seeing to the completion of required institutional compliance procedures where applicable Aiding with field underwriting and pre-sale assessments Demonstrate a teamwork mentality by being available to: offer support to other Highland Sales Resources than those assigned to fulfills requests received by the team as work volume demands, offering help to other associates where and when able Log all activity in Salesforce in compliance with established HCB guidelines and procedures Create contact records in Salesforce when needed Store illustrations in a manner consistent with protocols established and maintained throughout the enterprise Basic Requirements: Minimum 3 years of experience Proficiency with Microsoft Office (specifically Outlook, Word & Excel) Preferred Requirements: Industry Licenses or certifications Current Employees and Contractors Apply Here

Works closely together with CLP engineers and project managers to provide solutions that help separate CLP Systems in the market. Excellent service through our Design team is a top priority to our company and customers. Interprets the structural and architectural plans and understands concepts and applies them to CLP Systems' submittals. Responsibilities ▪ Read and interpret construction plans ▪ Review loading requirements and other specifications in CLP's design software ▪ Clean building layouts, review wall sections, and create cut section details in AutoCAD. ▪ Provide Bill of Materials and CLP drawing submittals used for product installation and EOR Review. ▪ Complete Revision submittals as needed to facilitate completion of projects ▪ Work with CLP engineering to ensure accurate and customer-friendly design. ▪ Communicate issues with the Project Management team for resolutions. ▪ Utilize Salesforce to facilitate scheduling process Qualifications ▪ Ability to work effectively in a high stress environment ▪ Excellent Verbal and written communication skills ▪ Proficient in Microsoft Excel, Word, Outlook ▪ Work effectively in a team environment as well as independently ▪ Customer service oriented, accountable, and proactive PREFERRED SKILLSET: ▪ REVIT and/or VBA experience is a plus ▪ Background in AutoCAD and Bluebeam Steel Dynamics, Inc., and all affiliated entities are equal opportunity employers. Coming Soon!!

Responsibilities: * Formulate preliminary space plans and sketches that integrate the client's needs * Confirm preliminary space plans and design concepts are safe, functional, aesthetically appropriate, and meet all public health, safety and welfare requirements * Determine selection of colors, materials and finishes to appropriately convey the concept and to meet socio-psychological, functional, maintenance, lifecycle performance, environmental, and safety requirements * Establish selection and specification of furniture, fixtures, equipment and millwork, including layout drawings and detailed product description; and provision of contract documentation to facilitate pricing, procurement and installation of furniture * Coordinate and collaborate with other allied design professionals who may be retained to provide consulting services * Confirm construction documents for non-structural and/or non-seismic construction are signed and sealed by the responsible interior designer, as applicable to jurisdictional requirements for filing with code enforcement officials * Assist with administration of contract documents, bids and negotiations as the client's agent * Provide reporting on the implementation of projects while in progress and upon completion Qualifications: * At least two (2) years of design experience within the commercial real estate market * Preferred Bachelor's degree from an CIDA accredited institution in a related discipline or field of study (i.e. Architecture, --Interior Design, Corporate Real Estate, Facilities, Project or Construction Management, etc.) required, OR Bachelor's degree in Other Major than above plus Interior Design Certification, Degree or Diploma. * Excellent time management, communication, collaboration, and the ability to manage multiple projects and deadlines, in addition to the ability to work independently * Skills coordinating Audio Visual and other specialty consultants Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $ 46,750.00 - $55,000.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"

We're building a world of health around every individual - shaping a more connected, convenient and compassionate health experience. At CVS Health , you'll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger - helping to simplify health care one person, one family and one community at a time. **POSITION SUMMARY** CVS Health is looking for hands-on, passionate people who want to join a high energy and growing team to make a difference in customers' lives and who want to be on the forefront of digital innovation that aims to reinvent what a pharmacy and a health care company can be in the digital world. Currently, our team is seeking a Senior Manager - Digital UX Design who will be an individual contributor while also managing a small team of experienced designers to deliver accessible, high-impact healthcare solutions. This role combines hands-on coaching, team development, and delivery management-ensuring design quality, consistency, and user-centered outcomes. The Senior Manager partners closely with cross-functional teams to guide direct reports in applying user research and analytics to design decisions, supports experience and product roadmaps through design thinking, and champions the evolution of UX practices-all while fostering a human-centered culture that enhances usability and end-user satisfaction. _Expectations for the Role:_ + Provide frequent, hands-on coaching to direct reports, including experience designers and content strategists, guiding individual development plans and differentiating between professional and career growth + Balance people management duties with hands-on ownership of critical design initiatives, contributing directly to project outcomes alongside your team + Build strong cross-functional relationships with product, engineering, and research partners; proactively communicate status, risks, and needs + Negotiate project priorities and timelines, balancing user needs with business and technical constraints + Integrate user research, analytics, and accessibility best practices into daily design decisions and project planning + Assign projects and tasks based on strengths and skill-building, communicating clear expectations and supporting colleague autonomy + Address bias, exclusion, and behaviors that undermine trust or inclusion; ensure all team processes and meetings are accessible and inclusive + Set clear goals and expectations for direct reports, holding the team accountable for quality, consistency, and delivery standards + Facilitate and participate in design reviews, offering actionable feedback on craft, accessibility, and alignment to standards + Identify and address skill gaps, process improvements, and blockers to sustain team performance and delivery + Model and coach accessibility skills-ensuring all team outputs meet or exceed accessibility standards and advocating for accessible solutions in every phase of delivery + Communicate the impact of design decisions on user and business outcomes; advocate for user-centered approaches in planning and execution + Allocate resources and manage team workload to deliver high-quality work on schedule and within scope + Model resilience, adaptability, and a growth mindset-supporting the team through challenges and change **REQUIRED QUALIFICATIONS** + 7+ years of professional experience + 5+ years leading design teams, both as a technical lead and a people leader + 5+ years of hands-on design experience supporting both mobile and web, preferably within a retail or pharmacy domain + 3+ years of advanced proficiency in design tools (e.g., Figma), accessibility standards (WCAG), and integrating research into design delivery **PREFERRED QUALIFICATIONS** + Demonstrated success coaching and developing designers, with a portfolio of accessible, user-centered healthcare solutions + Strong project management, facilitation, and cross-functional collaboration skills + Experience leading teams through change, balancing delivery with colleague development and well-being + Excellent communication, feedback, and storytelling abilities + Experience in an Agile environment **EDUCATION** Bachelor's degree or, equivalent experience (HS diploma + 4 years relevant experience) **BUSINESS OVERVIEW** Bring your heart to CVS Health Every one of us at CVS Health shares a single, clear purpose: Bringing our heart to every moment of your health. This purpose guides our commitment to deliver enhanced human-centric health care for a rapidly changing world. Anchored in our brand - with heart at its center - our purpose sends a personal message that how we deliver our services is just as important as what we deliver. Our Heart At Work Behaviors support this purpose. We want everyone who works at CVS Health to feel empowered by the role they play in transforming our culture and accelerating our ability to innovate and deliver solutions to make health care more personal, convenient and affordable. We strive to promote and sustain a culture of diversity, inclusion and belonging every day. CVS Health is an affirmative action employer, and is an equal opportunity employer, as are the physician-owned businesses for which CVS Health provides management services. We do not discriminate in recruiting, hiring, promotion, or any other personnel action based on race, ethnicity, color, national origin, sex/gender, sexual orientation, gender identity or expression, religion, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. We proudly support and encourage people with military experience (active, veterans, reservists and National Guard) as well as military spouses to apply for CVS Health job opportunities. **Pay Range** The typical pay range for this role is: $106,605.00 - $284,280.00 This pay range represents the base hourly rate or base annual full-time salary for all positions in the job grade within which this position falls. The actual base salary offer will depend on a variety of factors including experience, education, geography and other relevant factors. This position is eligible for a CVS Health bonus, commission or short-term incentive program in addition to the base pay range listed above. This position also includes an award target in the company's equity award program. Our people fuel our future. Our teams reflect the customers, patients, members and communities we serve and we are committed to fostering a workplace where every colleague feels valued and that they belong. **Great benefits for great people** We take pride in our comprehensive and competitive mix of pay and benefits - investing in the physical, emotional and financial wellness of our colleagues and their families to help them be the healthiest they can be. In addition to our competitive wages, our great benefits include: + **Affordable medical plan options,** a **401(k) plan** (including matching company contributions), and an **employee stock purchase plan** . + **No-cost programs for all colleagues** including wellness screenings, tobacco cessation and weight management programs, confidential counseling and financial coaching. + **Benefit solutions that address the different needs and preferences of our colleagues** including paid time off, flexible work schedules, family leave, dependent care resources, colleague assistance programs, tuition assistance, retiree medical access and many other benefits depending on eligibility. For more information, visit ***************************************** We anticipate the application window for this opening will close on: 02/27/2026 Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state and local laws. We are an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring, promotion, or any other personnel action based on race, ethnicity, color, national origin, sex/gender, sexual orientation, gender identity or expression, religion, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

This job opportunity is available at ANY location in the United States. Ideally, selected candidates will be near a JACOBS U.S. based office, but we intend to hire the "best" candidates. At Jacobs, we drive to make a positive impact on people's lives everywhere by bringing solutions and adding value to our communities and society as a whole. Grow your career with Jacobs, a company that inspires and empowers you to deliver your best work so you can evolve, grow, and succeed - today and into tomorrow. In our Advanced Manufacturing Group, our team elevates our clients by delivering cost-effective and transformative projects to the specialty chemical, electric vehicle, manufacturing, metals, pulp and paper and various other markets. We understand that the success of our clients is about more than well-designed facilities; it's about well-designed strategies tailored for every market and every location. We're looking for an experienced, high-energy, HVAC Designer to join our Building Mechanical team and help deliver innovative HVAC design solutions for our heavy industrial clients. You will work alongside our team of engineers and designers performing field investigations, interfacing with clients & vendors, sizing and selecting equipment, and preparing construction design packages. You'll be accountable for the schedule and technical quality of challenging engineering tasks as you gain familiarity with the client's expectations, scope, budget, and schedule. You'll work with a multi-discipline, highly interactive team to establish to meet the needs of our clients. Your role keeps our company connected, and we'll support you with what you need to be successful. Highlights of your contributions will include: * Layout and design of HVAC systems. * Development of conceptual design and preliminary design documents, which would include calculations related to sizing and selecting these systems, the development of Air Flow Diagrams (AFDs), Process and Instrumentation Diagrams (P&IDs), and general arrangements. * Development of final construction documents associated with these systems. These systems would include chilled water, cooling water, etc. * Coordination with other disciplines. Bring your curiosity, talent for multi-tasking and collaboration, and extreme organizational skills, and we'll help you grow, pursue, and fulfill what drives you - so we can make big impacts on the world together. * At least ten (10) years' experience in the design of HVAC systems for industrial facilities. * Proficiency in Revit. * Thorough knowledge of codes and standards related to the design of HVAC systems. * Adaptability to work within a fast-paced team environment with multiple deadlines. * Ability to collaborate with the project team remotely. Ideally, You'll Also Have: * Software experience in AutoCAD, Carrier HAP, Trane Trace 700, and Trane Trace 3D. * Experience in the design of plumbing/utility systems. Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

B.L. Harbert International is looking for a BIM/CAD Draftsman based in Birmingham, Alabama supporting the International Operations Group of BL Harbert International. Candidate will assist in the process of developing Building Integrated Models (BIM) to support construction projects through inter-discipline clash resolutions, quantity take-offs, and shop/coordination drawing development. Advanced proficiency in Autodesk Revit is required. Responsibilities: Prepare and modify all trade (structural, architectural, mechanical, electrical, etc.) models and details as directed utilizing Autodesk Revit Perform interdisciplinary coordination, shop/coordination drawing production and material quantification using Autodesk Revit Help develop and execute project specific BIM plans/procedures Support engineering and construction teams in terms of dimensions, layout, quantity surveying, clash detection, etc. Create and examine Autodesk Revit content for adherence to company BIM standards Assist in troubleshooting field construction issues and questions Collaborate with design and construction teams to identify goals and communicate procedural changes Participate in BIM coordination meetings, preconstruction meetings, and submittal review meetings Requirements: US Citizen Ability to obtain and maintain US Government Security Clearance Minimum 1-2 years of experience in Autodesk Revit Preferences: Undergraduate Degree in Architecture, Engineering, Construction Science/Technology or related discipline Experience in highly technical US Government, civil/industrial or commercial design projects Experience integrating Revit with fabrication and/or survey technology a plus Physical Demands: To perform the duties of this job, the employee must: Have the ability to repetitively use hands to grasp, reach above and below with arms, and work overhead Have the ability to stoop, bend, walk, kneel, crouch and crawl Have the ability to lift, carry and/or move up to 25 lbs. of weight in the form of paper, boxes, files, etc. Have the ability to sit for extended periods with occasional standing required Possess the manual dexterity to operate office equipment, filing, and perform specialized skills Possess a high degree of concentration necessary in a busy office environment Work Environment: To perform the duties of this job, the employee Must be able to work in an office environment Must have flexibility with hours in order to better accommodate business needs B.L. Harbert International, LLC offers an excellent benefits package including a competitive US base salary, BCBS medical and dental, group insurance, 401K plan and paid holidays and vacation. B.L. Harbert International, LLC is an EOE / Vets / Disabilities

What We Live By…… The McWane Way is a core philosophy outlined by the founder J.R. McWane in 1920. Today It encompasses Teamwork, Excellence, Leadership, Environment, Communication, Accountability, Safety and Trust. All team members at every level are expected to know and work by these principles, values, and behaviors. Most importantly, every team member is expected to be able to answer this question, "What does this mean for me?" This is the all-important question because behavior is the best evidence of a living principle. Join the McWane team on the journey to The McWane Way. Who We Are…… McWane Inc. has a newly created division, McWane Plant and Industrial (MPI). This new division, based in Birmingham, AL, combines all Plant and Industrial Products in a single customer-focused package. We offer comprehensive solutions through an experienced team of professionals specifically focused on these two special markets. Our Mission is to be the Plant and Industrial supplier who is "easiest to do business with". We will make it easier to engineer, specify, and order components for plants. We will provide greater support for smoother delivery, cost-effective installation, and start-up. Most importantly, we will build strong relationships with design engineers, contractors, plant operations teams and project owners to assure we are their first-choice supplier for both new construction and future upgrades. At MPI, you will be part of a fast-paced, collaborative, start-up where you can see, firsthand, how your work translates into positive results. Position Summary This position will help build the design and modeling foundation of MPI's product portfolio. These products will be manufactured at our Alabama Dynamics location, in Calera, AL, where standardization of best practices and formatting will be fundamental. The MPI division is generating significant growth, requiring collaboration with several sister divisions as internal product knowledge and development mature. The person hired will help develop baseline models/drawings packages in standard formatting for each product line, create best practices and work instructions, and communicate regularly with Manufacturing and Product Management. Position Designer Location Calera, AL Reports to Engineering Director Scope of Responsibilities * Support technical product engineers in the development of new and existing products and/or technologies within the MPI product portfolio. * Perform PLM documentation work: filing ECO/DCOs, creating procedures, work instructions, etc. * Analyze design solutions using engineering software tools and statistical methods. * Identify and mitigate risks associated with equipment functionality, safety, COGs and manufacturing scalability. * Works closely with engineers, manufacturing, and sales to ensure collaborative design systems. * Performs checking procedures as appropriate to the discipline and assigned by the Engineering Manager/Director. * Work with and manage external suppliers, conduct DFM reviews, and go onsite as needed. * Follow ISO procedures to ensure consistent and documented product release. * Maintain a positive and efficient work environment built on a creative exchange of information, ideas, and techniques throughout the organization. Qualifications Qualifications Basic Qualifications * Associates degree in Mechanical Design is highly desired * Recent grad to four (4) years experience of CAD/Modeling; SolidWorks preferred * Experience in steel manufacturing technology and process * Demonstrate the use of independent judgment to identify improvement opportunities. * Must be comfortable balancing multiple priorities. * Knowledgeable in lean CAD layout planning. * Demonstrate the highest level of ethics, integrity, and honesty in all relations. Preferred Qualifications * Accredited two (2) year technical degree * Experience creating solid models using SolidWorks software * Intermediate computer and software skills to include the use of word processing, e-mail, spreadsheet and electronic presentation programs Position Requirements * Able to work in a fast-paced environment, under pressure and within project deadlines * Ability to work cross-functionally and with other McWane divisions * Up to 10% (air/car) travel based on business needs to vendors and other sites if needed. * Must be able to meet and adhere physical requirements included in traveling various MPI locations with appropriate PPE. * Must have valid driver license and be eligible for auto insurance coverage. Additional Information Please note this is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. LIMITATIONS AND DISCLAIMER The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. McWane Plant & Industrial. is an EEO/AA employer M/F/D/V. It is the Company's policy to provide equal opportunity for all qualified persons and to prohibit discrimination on the basis of race, color, sex, national origin, religion, age, disability, marital status, sexual orientation, gender identity, citizenship status, or any other legally protected status. We maintain a drug-free workplace and reserve the right to perform substance abuse testing as needed. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

As a Senior Landscape Designer|Project Manager, your passion for creating captivating outdoor spaces and cultivating relationships is contagious. As part of our innovative design studio, you join the mission of connecting life and land and experience the immense rewards of this work. Using strong skills in design, sales, communication, and project management, you will expertly manage a diverse portfolio of high-end, custom-crafted projects. Key Skills/Attributes Enjoyment of people Creativity, curiosity, and confidence Active listening and verbal communication Critical thinking to identify solutions to problems Reading comprehension to understand work-related documents Artistic eye for elements of design such as color theory, texture, balance, proportion, and more Computer skills. Familiarity with CAD, GIS, and basic landscape management software is a plus. Horticultural experience and education. Knowing the ways ecological conditions affect a proposed design is imperative. Construction background. Knowing the practicality and buildability of a proposed design is vital. Surveying experience and equipment knowledge Experience with estimation and sales. Business acumen Duties and Responsibilities Client Consultations Meet clients to create enjoyable and efficient consultation experiences. Engage clients in conversations to understand their dreams and desires for the space. Ensure clear communication, set expectations, deliver excellent results, and provide ongoing client care. Site Analysis and Design Understand each site to design according to the land's needs and the client's wants. Conduct site analysis and take measurements. Consider environmental factors such as drainage, energy availability, tree locations, drainage issues, and grade changes. Envision the potential of the space with knowledge of hardscape construction, plant material, and design elements. Discuss the scope and scale of the property's livability during the initial consultation. Design Management Manage the design process Prepare the site plan and graphic presentation yourself or subcontract to an in-house or external designer. Prepare cost estimates and oversee the project's budget. Present the design and estimate to clients for approval. Project Collaboration and Management Collaborate closely with project managers to ensure designs are buildable and job sites are efficient. Serve as a project manager for each of your jobs. Periodically visit job sites to check on progress and address needs. Basic Requirements Minimum of a Bachelor's degree in Landscape Horticulture (BS, Hort) or Landscape Architecture (BLA) and a minimum of 5 years experience in high-end residential work for discerning clients. Additional compensation is given to those possessing a Setting of Landscape Plants (SLP) and Landscape Design (LD) license attained through the Alabama Department of Agriculture and Industries (ADAI). Ability to pass our prescreening process, including background check, motor vehicle report, and drug screening Physical Requirements Prolonged periods of sitting at a desk and working on a computer Must be able to lift 15 pounds at times Must be able to access and navigate our bulk yard, loading areas, office space, and other aspects of our facilities Compensation Competitive salary and base pay details are reserved for discussion with candidates during the interview process. We offer amazing benefits, including comprehensive health care, retirement packages, incentivized goal achievement, paid vacation, and paid holidays. Additionally, you will receive continual training that allows you to advance your career while strengthening the Father Nature team. About Us Father Nature Landscapes is passionately connecting life and land. For over 17 years, our renowned team has provided premier landscape services to discerning clients across the Birmingham area. Continually expanding, we need the industry's best to join us in creating outstanding projects and dynamic customer experiences. EEOC Statement To foster the power of innovation and collaboration, Father Nature Landscapes is committed to diversity and building a team that represents a variety of skills, experiences, perspectives, and backgrounds. We do not discriminate; rather, we base decisions on qualifications, merit, and business needs so the entire team may grow. Communication Request: *We use BambooHR as a portion of our hiring process. Emails we might send to you will come through BambooHR domains. To ensure you can receive these messages, please *********************** in your email provider.

+ This position is responsible for creating design drawings in 2D or 3D for the clients Transmission and Distribution electrical Substations and supporting clients design criteria and standardization efforts. + The Designer will produce engineering drawings using AutoCAD, Autodesk 3D Inventor or Autodesk Map 3D (P4A), produce specifications and material requirements for substation projects with emphasis on safety, quality, scheduling, and costs. + To further detail, the job responsibilities include the creation/modification of scaled 2D drawings and 3D models designing the physical aspects of electrical substations, including but not limited to Foundation Layouts, Grounding Layouts, Conduit Layouts, Switchgear Assembly Layouts, Substation Layouts, Switch House Layouts, Electrical Bus Design, etc. + The designer will specify and order material for electrical substation design packages, including stock, non-stock and shop fabricated material. + The Designer will transmit drawing packages and supporting specifications using the Transmission Engineering job transmittal program. + The Designer will coordinate and communicate with engineers and other departments associated with electrical Substation Design. + The Designer will interact with manufacturers, vendors, and client committee members to resolve equipment and material issues. + The Designer must provide support to the OPCO's Substation Construction, Field Services, Project Management and Substation Maintenance. + This position will require site visits for projects, including pre-construction meetings, during construction and post-construction. + Some overnight travel will be required. This position will be locate in Birmingham, AL. **Job Qualifications:** **Experience:** + Strong understanding of electrical substation equipment is preferred. + Experience in Transmission and /or Distribution Substation Operations for an electric power utility company is preferred. + Good understanding of utility electric grid operations is preferred. + Knowledge of basic electrical power system theory is preferred. + Strong understanding of the National Electric Safety Code, National Electric Code, and OSHA safe operating practices is preferred. + Ability to create electrical Substation Physical drawings from a single line or three line diagram is preferred. + Ability to create/manipulate 2D drawings and 3D models for electrical Substations. + Experience using 3D modeling software (SDS Inventor, Autodesk Inventor or Autodesk 3D (P4A) is preferred. + AutoCAD training or experience is preferred. + Experience working with document management & estimating systems preferred. + Experience using Primavera (P6), progress reporting software preferred. + Proficiency using Microsoft Office products is required. **Knowledge, Skills & Abilities:** + Must demonstrate excellent communication skills (oral & written) and the ability to communicate technical issues simply. + Must be a self-starter and exhibit strong problem-solving skills. + Must work well in a team environment and have the ability to develop and build relationships at all levels. + Must possess effective time management and organizational skills sufficient to manage multiple projects with various priorities and competing deadlines. + Must demonstrate a customer focus with a willingness to meet the needs of our customers and solicit feedback. + Must have the ability to be an effective mentor to others and teach job-related skills. + Must accurately enter weekly time and process business expense receipts promptly. + Must be able to envision equipment/materials and how they connect spatially inside three dimensional space. **Education:** + Bachelor's Degree in Engineering or Engineering Technology degree -OR- + Associate Degree with at least 5 years of related industry experience -OR- + High school diploma with significant related industry experience of at least 8 years. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are looking to hire a CAD Designer for a local engineering firm that is focused on residential and commercial projects, small to mid-sized cities and the utility systems that serve those areas. These are the places where they can have the most immediate impact. Some of the projects they are working on include residential subdivisions, wastewater and water sewer treatment plans, wastewater and water distribution projects and other impactful projects. This person will be in office from 8AM-5PM designing water treatment and wastewater projects. The more advanced technicians will be involved in the engineering processes as well. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements -Civil 3D experience - Highly motivated self-starter, results-driven and teamwork oriented - Coordination of drawing production activities between all disciplines at the project level - Good communication skills, both written and verbal -Culture fit - MicroStation -Certifications - Water/Wastewater experience plant (water lines, sewer, site grading)

B.L. Harbert International is looking for a BIM/CAD Draftsman based in Birmingham, Alabama supporting the International Operations Group of BL Harbert International. Candidate will assist in the process of developing Building Integrated Models (BIM) to support construction projects through inter-discipline clash resolutions, quantity take-offs, and shop/coordination drawing development. Advanced proficiency in Autodesk Revit is required. Responsibilities: * Prepare and modify all trade (structural, architectural, mechanical, electrical, etc.) models and details as directed utilizing Autodesk Revit * Perform interdisciplinary coordination, shop/coordination drawing production and material quantification using Autodesk Revit * Help develop and execute project specific BIM plans/procedures * Support engineering and construction teams in terms of dimensions, layout, quantity surveying, clash detection, etc. * Create and examine Autodesk Revit content for adherence to company BIM standards * Assist in troubleshooting field construction issues and questions * Collaborate with design and construction teams to identify goals and communicate procedural changes * Participate in BIM coordination meetings, preconstruction meetings, and submittal review meetings Requirements: * US Citizen * Ability to obtain and maintain US Government Security Clearance * Minimum 1-2 years of experience in Autodesk Revit Preferences: * Undergraduate Degree in Architecture, Engineering, Construction Science/Technology or related discipline * Experience in highly technical US Government, civil/industrial or commercial design projects * Experience integrating Revit with fabrication and/or survey technology a plus Physical Demands: To perform the duties of this job, the employee must: * Have the ability to repetitively use hands to grasp, reach above and below with arms, and work overhead * Have the ability to stoop, bend, walk, kneel, crouch and crawl * Have the ability to lift, carry and/or move up to 25 lbs. of weight in the form of paper, boxes, files, etc. * Have the ability to sit for extended periods with occasional standing required * Possess the manual dexterity to operate office equipment, filing, and perform specialized skills * Possess a high degree of concentration necessary in a busy office environment Work Environment: To perform the duties of this job, the employee * Must be able to work in an office environment * Must have flexibility with hours in order to better accommodate business needs B.L. Harbert International, LLC offers an excellent benefits package including a competitive US base salary, BCBS medical and dental, group insurance, 401K plan and paid holidays and vacation. B.L. Harbert International, LLC is an EOE / Vets / Disabilities