Senior designer jobs in Knoxville, TN - 64 jobs

Job Description The Mechanical Designer III at Aqua-Chem is responsible for the mechanical design/drafting of water treatment process equipment including, but not limited to, skid frames, pipe routing, major component placement, bill of materials and component design development Schedule: M- F | 8:00 am - 5:00 pm Location: Knoxville, TN Pay Range: $75,000 - $118,000 Benefits: Group Medical, Dental Vision, 401(k) Match, Paid Vacation, Paid Holidays, and Paid Sick Time. +Employer Paid Benefits: STD, LTD, Life AD&D Essential Duties: Complete assigned design/drafting tasks accurately and on time. Perform complex drafting tasks to prepare drawings of intricately designed parts and assemblies. Generate multiple views of equipment from 3D models into 2D manufacturing drawings. Handle responsibilities with effective interpersonal skills and effectively interface with others inside and outside the engineering department. Make arithmetic computation using standard formulas when required for calculating dimensions and allowances, to meet technical specifications. Create final drawings indicating dimensions of parts, qualities of materials to be used, load capacities, etc. Check the work of other designer/drafters. Assist with Facility Acceptance Test (FAT) with walking down equipment and generating “As-built” design models/drawings Perform engineering changes and provide change notices when required. Other duties as assigned by Manager/Supervisor. Education/Experience: Must be a U.S. Citizen High School Diploma/GED required Able to work overtime as required Requirements: Associate degree in a designer/drafting related field (preferred) or equivalent experience. Two (2) years or more experience with design/drafting of process equipment or relevant experience. Two (2) years or more experience with design of skid-based equipment systems Experience with SolidWorks in both 3D modeling and 2D drawings. Experience with FEA computations a plus. Experience with AutoCAD Plant 3D, Revit, and Inventor highly desired. Experience with Autodesk Vaults a plus. Experience with reading, understanding, and generating Process & Instrument Diagrams Work requires some active physical exertion on the shop floor and detailing as built drawings. Experience with Microsoft Office products and other application software with the ability to learn additional application software when required. *This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgment, to be proper. This description supersedes any previous description for this position. This description supersedes any previous descriptions for this position. **Aqua-Chem provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

PDS 5 / Power Delivery Substation Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Mesa seeks a Physical Substation Designer who will be responsible for the design of deliverables associated with substation Physical design projects. Assigned tasks will include the creation and revision of General Arrangements, Elevations and Sections, Grounding layouts, Conduit and Cable schedules, and Bill of Materials using AutoCAD & Inventor (3D modeling). Responsibilities Work under & alongside experienced engineer Utilize AutoCAD & Inventor to create assigned deliverables Meet customer's schedule and budget requirements Perform Physical design with high degree of accuracy Willingness to travel and work occasional overtime as needed Perform careful self checking activities to ensure the quality of work before it is presented to senior design reviewers Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job DescriptionSystems Design Contractor for a Department of Energy Facility Technical designer with design systems experience Strong proficiencies in Figma and working with JS, CSS, and HTML Familiarity / experience with frameworks such as Storybook or Svelte a huge bonus Capable of helping our UX team architect, design, and build out our design system in Figma and collaborate with our developers to inform a codebase (may be Storybook or Svelte) but integrate with Vue, React, Drupal, WordPress to name a few Must be eligible for a federal security clearance Must be able to work onsite or hybrid in Oak Ridge, TN

Inhabit operates a unique collective of tech-forward companies serving the residential, commercial, and short-term rental industries. Our team members deliver best-in-class software solutions and services while fostering innovation and collaboration with business leaders and industry experts. Inhabit believes that property managers are central to the success of the residential and short-term rental markets and delivers products built to empower them, their investors, and communities. Come help build the company you want to Inhabit. To learn more, visit inhabit.com. Job Description Summary This is the perfect position for a creative looking to work with a team and get significant hands-on experience within an established, growing company. This role likely suits a junior to mid-level designer who is seeking to gain in-house experience within the B2B, software and technology areas. The Graphic Designer is responsible for taking conceptual design ideas and creating visual deliverables that achieve marketing and brand goals, both electronically and in print. This individual works with a variety of products, applications, and software platforms while simultaneously collaborating with the broader marketing team to deliver compelling design products that promote a variety of software and services. What You'll Do (Functions & Responsibilities) * Create and design various materials for print and digital collateral (e.g. infographics, emails, forms, advertisements, brand guides, brochures, trade show booths etc.) * Work with a wide range of media, and use graphic design software to execute compelling work (e.g. Adobe Creative Cloud, Figma, PowerPoint, etc.) Experience with PowerPoint is highly preferred. * Align design work with established brand guidelines and narratives * Conduct research, involve stakeholders and ensure the design process is organized and effective from start to finish * Prioritize and manage multiple projects within design specifications and budget restrictions * Perform retouching and manipulation of images (e.g. creating a style of images) * Illustrate concepts by designing rough layouts of art and copy regarding arrangement, size, type size and style, and related aesthetic concepts * Complete projects by coordinating with internal stakeholders, outside agencies and/or freelancers, art services, printers, etc. * Maintain technical knowledge (e.g. attend design workshops; review professional publications; participate in professional societies) * Ensure projects are completed with high quality and on schedule * Maintain marketing assets library by organizing and refreshing collateral Additional Responsibilities * Assist with trade show inventory and ship/coordinate related shipments * Additional administrative and marketing tasks as required

Details: PTS is looking for a Senior Mechanical Designer with EPC experience help deliver projects within the power generation sector. In this role the Senior Mechanical Designer will work alongside key members of the team to include engineers and drafters to design additions and modifications to power generation facilities related to mechanical systems. Job Responsibilities: Develop and present detailed design models using AutoCAD Plant 3D, Inventor, SolidWorks, Revit, and/or Navisworks. Prepare comprehensive drawing packages with tools such as AutoCAD, Plant 3D, and MicroStation. Create and update Piping and Instrumentation Diagrams (P&IDs), equipment layouts, piping plans/details, pipe support details, piping isometrics, and bills of materials. Utilize laser scanning technology with Plant 3D, Navisworks, and Recap for project applications. Conduct site walkdowns to gather detailed field information, document existing equipment configurations, and perform on-site laser scans. Review and peer-check design packages developed by other team members. Provide guidance and mentorship to design team members and drafters. Job Qualifications: Engineering Technology Degree or Certification in drafting 7+ years of experience in piping and plant design Working knowledge of applicable industry codes to include ASME B31.1, ASME B31.3, NFPA, ANSI and API Able to travel for project meetings and site visits

Join Us: Elevate Your Career as a Sr. CAD Designer - Shape Tomorrow's Airports Are you ready to take your engineering design expertise to new heights in the dynamic world of aviation? Do you thrive in a collaborative environment where your leadership and technical skills drive impactful solutions for airports and communities? CHA Consulting, Inc. is seeking a Sr. CAD Designer to join our Aviation Team in Atlanta, GA or Knoxville, TN, where you'll play a pivotal role in delivering specialized designs for airports of all sizes. This is your opportunity to mentor junior designers, collaborate with multidisciplinary teams, and contribute to projects that promote sustainability. What You'll Do: * Leads the research, preparation, and creation of various types of contract or construction drawings using industry software such as REVIT, AutoCAD, MicroStation, Civil 3D, etc. * Mentor junior and mid-level designers, ensuring quality and consistency across all project work * Collaborate with design teams on multiple projects to meet client, contractual, and company requirements in a timely and cost-effective manner * Participate in project review meetings, assist in developing technical reports, material costs, and construction estimates * Prepare project "As-Builts" documentation and support field assignments as needed What You Bring: * Associate's Degree in Engineering, Engineering Technology, Engineering Science, or related technical field required * Minimum of 7 years' experience in document production within the engineering discipline required * Proficiency in discipline-based software (REVIT, AutoCAD, Civil 3D, MicroStation) and Microsoft Office Suite * Strong verbal and written communication skills, with a collaborative work ethic * Solid working knowledge of engineering discipline * Ability to lead design drawing layout Why You'll Love It Here: * Work on projects that transform airport environments and support community growth * Enjoy a flexible work environment with opportunities for growth Curious about the impactful work our Aviation team is doing? Discover our innovative projects and commitment to sustainable solutions by visiting: chasolutions.com/solutions/aviation/. Salary Range: $43.26 - $48.07 Salary is based on a variety of factors, including, but not limited to, qualifications, experience, education, licenses, specialty, training, and fair market evaluation based on industry standards. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law. #LI-AU1

Our rapidly-growing construction company is in need of a creative, full-time CAD designer to bring our client's dreams to life! You'll serve as our primary architectural drafter and produce original, computer-generated designs in 2D and 3D. Additional responsibilities include meeting with clients, integrating feedback, and revising designs as requested. Communication skills are a must in this role, as you'll be regularly communicating the design progress to the construction team. Applicants should be experienced design engineers who enjoy highly detailed work, are passionate about working on a project from start to finish, and want to grow their career in the construction industry. Sound like a job you'd love? Please apply today!

THE DEPARTMENT Our Marketing/Brand Department increases Altar'd State's reach through a mix of inspiration and beauty. The goal: a global community that's passionate about who we are and what we do. THE OPPORTUNITY As the Design Director, you'll combine your fashion expertise, leadership and strategic vision, along with an understanding of Altar'd States brand and product. In this role, you will lead and motivate a team of high performers tasked with creating cohesive marketing initiatives across all our marketing and social channels, from social platforms and influencers to digital engagement tools and e-commerce. YOU'LL LOVE IT BECAUSE YOU WILL BE •Leading a full-service Creative Services team, which includes Art Direction (Social Media, Signage, Packaging and Digital), Videography, Photography, Copy and Visual across E-commerce, Retail and Catalog. Review and approve designs, artwork, photography, and graphics developed by Brand Creative team members • Originate compelling, creative solutions for all creative brand initiatives based on the brand positioning • Creation and execution of seasonal stories for both catalog and digital, internal presentations, engagement programs, directional store documents and interior design • Translate strategic and conceptual direction into working creative assets, both 2 and 3D, across all mediums including; product packaging, e-commerce, POS/ retail environment, merchandising, social media, print and digital advertising, franchise toolkit/guides, conference and consumer engagement environments • Apply current trends in culture, design, advertising, fashion, social media, digital, entertainment, etc. to the brand in ways that keep the brand relevant • Manage multiple projects, outside partner relationships and corresponding deadlines • Understand post production of photographic and printed materials, and be able to communicate with corresponding vendors WE DESIRE • 10 years of experience in fashion-related marketing department with demonstrated success • 10 years of experience building and leading powerful teams • 5 years minimum in catalog and/or graphic design • Advertising or Design Agency Experience a plus • Demonstrated skill in managing people, creativity, and a command presence • A leading role in supporting global, disruptive campaigns for lifestyle brands, as well as partnering with outside agencies • A collaborative nature with finesse in developing relationships cross-functionally • Meaningful experience with agency/vendor management • Exceptional interpersonal, networking and verbal and written communications skills, with a sense of humor • Ability to handle multiple projects simultaneously in a high-pressure, fast-paced environment • Excellent computer skills: Creative Suite • Bachelor's degree in Marketing, Communications, Journalism, or a related field OS: Mac + PC Adobe Creative Suite; Sketch and/or Adobe XD valued but not required Altar'd State Altar'd State is an Equal Opportunity employer. Altar'd State believes in providing an inclusive workplace where all individuals have opportunity to succeed. We are committed to doing so by providing accessible employment practices. Requests for accommodation due to a disability can be made at any stage of the recruitment process and applicants are asked to make their accommodation needs known.

We're looking for a Registered Architect, with a preference for LEED AP Certification, with knowledge of design, trends, construction methodology, material application, and manufacturer-supplier appropriateness. As the Architect you will work with or possibly lead groups of architects and designers to complete technical portions of projects within established budgets and schedules. The work will be performed in Oak Ridge, TN with potentially some business travel. Join us and love what you do. Focus on tackling the toughest challenges with a smile as you support the development of life changing infrastructure that improves communities across the United States. If you're up for the challenge, we've been looking for someone just like you. Join our team and help us lay the foundation for human progress. Amentum Nuclear Projects is a Tier 1 service provider to the U.S. Department of Energy, we deliver safe and innovative solutions at complex nuclear cleanup and production sites. Our services include program management, decommissioning, environmental remediation, waste and nuclear material management, nuclear operations, consulting, and engineering and construction. + Bachelor's degree in Architecture from an accredited Architectural program + Licensed Architect in Tennessee with current registration or licensed in another state with ability to obtain TN licensure + Experience designing commercial or industrial facilities + Demonstrate experience of delivering a range of projects from concept through detailed design completion. + Experience with International Building Code (IBC) + Producing specifications and reviewing work of other staff for technical accuracy and provide guidance + Strong knowledge of design, trends, construction methodology, material application, and manufacturer-supplier appropriateness + Ability to Follow established Amentum quality procedures and ensures that all work accomplished under their control is accomplished under established quality procedures + Experience working within a quality system based on ISO 9000 or NQA-1 + Competent using discipline specific software such as: Revit, AutoCAD, Microstation, etc... + Competent using Microsoft 365 software. + US citizen required. **Preferred qualifications:** + LEED AP certification + Able to lead groups of architects and designers to complete technical portions of projects within established budgets and schedules. + Experience with Department of Energy (DOE) standards and Nuclear Regulatory Commission (NRC) regulations + Master's degree is a plus + DOE Q clearance is preferred but not required + A person residing a commutable distance from our Oak Ridge, TN office + NCARB registration is preferred but not required + Experience facilitating Charrettes desired but not required + DOE experience is desirable but not required. + Project Management Experience + Visualization/Graphic Capabilities Essential Functions: Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, and lifting. Lifting requirements limited to 20 lbs. in the form of supplies, drawings, etc. Longest distance carried of 50 feet. Hand manipulation is required for simple grasping, pushing, and pulling, and fine manipulation. Right and/or left hands utilized. Occasional need to reach and/or work above the shoulder, for supplies, as well as below the shoulder for same. No foot controls necessary. Must be alert to equipment in the field, there will be occasional travel, will work near construction job site equipment when in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. At Amentum, we help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of Beyond Zero workplace injuries, we believe that you'll find a flourishing career here at Amentum. Equipment and Machines: Standard office PC, with software will be provided Travel required - As needed Attendance: Ability to work in the office is required OTHER ESSENTIAL FUNCTIONS U.S. Citizenship required. Valid driver's license is required. Must be able to work in a team atmosphere. Must put forward a professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. Must take and pass a pre-employment drug and background check.

Closet Factory is the custom storage solution authority serving the need for customized space organization throughout the home. We design, sell and install custom storage around our customer's needs. For almost 40 years, Closet Factory has been creating dynamic, truly custom organization solutions for our clients. We are experiencing tremendous growth and as a result are opening a Veteran-owned branch in Alcoa, TN serving the Knoxville and surrounding areas. As such, we are looking to develop a passionate & motivated Sales team. We are looking to hire the top candidates. Our established brand and technique sets us apart from competitors due largely to you, and what our Designers can offer the customer. Greater customization, digital presentations, superior construction and empowering you with the ability to negotiate with customers will quickly place you in a position to succeed. A strong commitment to your personal development through industry leading training, education and implementing your feedback will empower you increase your success. This position is considered HYBRID. You do need to live in the greater Knoxville area to go on appointments and be required to attend biweekly meetings at the office, however some work can be done from home. Duties and Responsibilities: Present yourself in a courteous, professional manner to clients Present products and services effectively to customers Adapt to meet customer needs/wants Utilize 3D design software to create customized designs Maintain your schedule/availability in Closetware Drive in/around the area of responsibility to meet customers Qualifications for the Position: Sales experience (not retail) a must Design experience a plus Basic Computer Skills Must pass a background check Good at networking Job Benefits: The most competitive commission structure in the industry by far! Industry leading training Company matched 401K Flexible schedules High degree of autonomy Cutting edge design technology and support Team-oriented working environment and culture SALARY: Competitive commission-based pay scale. Top 10% of Designers make $180,000/yr. If you are motivated, career-minded, good at reading people, have an eye for design, and are self-motivated, this is the job for you. We recognize people as our most valuable asset and will train you to excel in your position. We value and incentivize our personnel to be successful! If you are thinking about taking the next big step in your career, this may be the opportunity you have been waiting for.

Merrick & Company's Nuclear Services & Technology team provides full service nuclear design solutions to the federal government (DOE, NNSA, and NIST), nuclear research, and nuclear medicine. Merrick is seeking a highly motivated, team oriented Mechanical Engineer to support our operations in our Aiken, SC or Oak Ridge, TN office. Client projects for this position require U.S. Citizenship. WHAT YOU'LL DO The successful candidate will design HVAC and Plumbing/Piping system for a variety of facility projects. Tasks include developing design calculations, process flow diagrams, sequences of operation, equipment selection and layout, ductwork and piping sizing and layout, support of project proposals, interdisciplinary coordination and participating of QA/QC process. Part time efforts will be devoted to site inspection and construction administration. This position is primarily a leadership role and will be part of a design team environment. * Must be willing to work in a design team environment, including directing the work of junior engineers and designers, and delegating work as required as well as take design direction from senior-level engineers * Interdisciplinary coordination * Develop calculations, flow diagrams, and specifications * Size and layout ductwork, hydronic and plumbing piping systems * Lead QA/QC processes * Proficient with codes, standards and guidelines REQUIRED QUALIFICATIONS * Bachelor's degree (B. S.) in Mechanical Engineering from an A.B.E.T. accredited program. * A minimum of twelve (12) years related experience. * Candidate must have their PE license. * Must understand the importance of Business Development, project management for A-E firms, managing to fee and demonstrate skills in a multi-discipline teams. * Position requires the ability to manage other engineers and designers. * Experience interfacing with client contacts. * Strong experience with thermal load calculation and energy modeling for mechanical systems. * Strong experience in calculating and sizing of mechanical equipment including AHUs, fans and pumps. * Strong experience in sizing and laying out ductwork and hydronic piping systems. DESIRED QUALIFICATIONS To perform the job successfully, an individual should demonstrate the following competencies: 1. Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. 2. Design - Generates creative solutions; Translates concepts and information into design; Uses feedback to modify designs. Demonstrates attention to detail. 3. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; 4. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. 5. Team Work - Balances team and individual responsibilities. 6. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information. 7. Verbal Communication - Able to clearly communicate to others at all levels within the organization. 8. Adaptability - Adapts to changes in the work environment and meets expectations for attendance and punctuality. PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! PHYSICAL REQUIREMENTS * Requires the ability to sit or stand for extended periods at a computer workstation. * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Bachelor's degree (B. S.) in Mechanical Engineering from an A.B.E.T. accredited program. * A minimum of twelve (12) years related experience. * Candidate must have their PE license. * Must understand the importance of Business Development, project management for A-E firms, managing to fee and demonstrate skills in a multi-discipline teams. * Position requires the ability to manage other engineers and designers. * Experience interfacing with client contacts. * Strong experience with thermal load calculation and energy modeling for mechanical systems. * Strong experience in calculating and sizing of mechanical equipment including AHUs, fans and pumps. * Strong experience in sizing and laying out ductwork and hydronic piping systems. The successful candidate will design HVAC and Plumbing/Piping system for a variety of facility projects. Tasks include developing design calculations, process flow diagrams, sequences of operation, equipment selection and layout, ductwork and piping sizing and layout, support of project proposals, interdisciplinary coordination and participating of QA/QC process. Part time efforts will be devoted to site inspection and construction administration. This position is primarily a leadership role and will be part of a design team environment. * Must be willing to work in a design team environment, including directing the work of junior engineers and designers, and delegating work as required as well as take design direction from senior-level engineers * Interdisciplinary coordination * Develop calculations, flow diagrams, and specifications * Size and layout ductwork, hydronic and plumbing piping systems * Lead QA/QC processes * Proficient with codes, standards and guidelines

Schedule: Full-Time Standard Nuclear is fueling America's nuclear renaissance at industrial scale. Our mission is to deliver the essential building blocks of nuclear power-enabling cost-effective, safe, and secure energy for the world. The Mechanical Drafter will support Standard Nuclear's engineering, operations, and safety efforts by developing and maintaining accurate process and mechanical documentation, with a primary focus on piping and instrumentation diagrams (P&IDs). This role also includes limited support for process flow diagrams (PFDs) and other mechanical drawings as needed. The Mechanical Drafter will work closely with engineers, operators, and safety personnel to translate equipment setups, process concepts, and system changes into clear, controlled drawings used for operations, reviews, and safety analyses. This position is ideal for a detail-oriented drafter with experience in industrial or process-driven environments who understands the importance of accurate documentation in safe and reliable operations. RESPONSIBILITIES P&ID & Process Documentation Create, revise, and maintain piping and instrumentation diagrams (P&IDs) for process systems and equipment configurations. Ensure P&IDs accurately reflect piping, valves, instrumentation, interlocks, and system boundaries. Develop P&IDs for new equipment setups and update existing drawings to reflect process or configuration changes. Incorporate redlines, as-built conditions, and feedback from engineering and operations teams. PFD & Mechanical Drafting Support Provide drafting support for process flow diagrams (PFDs) as required. Produce and update related mechanical drawings such as equipment layouts, general arrangement drawings, and system schematics. Support engineering teams by translating conceptual designs into clear, usable drawings. Safety & Review Support Support safety analyses and reviews by ensuring drawings clearly represent system configurations, controls, and safeguards. Participate in drawing reviews related to operability, safety, and system readiness. Assist engineers by identifying inconsistencies, missing information, or documentation gaps. Equipment & System Context Develop drawings for systems involving furnaces, thermal processing equipment, gas delivery systems, liquid handling systems, and associated infrastructure. Coordinate with engineers and operators to understand equipment layouts and process intent. Participate in walkdowns or equipment reviews as needed to verify field conditions. Document Control & Standards Maintain drawing files, revision history, and change documentation in accordance with internal standards. Ensure consistent use of symbols, nomenclature, and drafting conventions. Support audits, reviews, and engineering change processes by providing accurate and current drawings. PREFERRED QUALIFICATIONS Associate degree or technical certification in drafting, design technology, or a related field (or equivalent experience). 3+ years of experience producing mechanical drawings in an industrial, manufacturing, or process environment. Proficiency with AutoCAD or similar drafting software; experience with Plant 3D is a plus. Strong understanding of P&ID symbology, piping components, valves, and basic instrumentation. Experience supporting safety reviews, operability reviews, or regulated environments is a plus. High attention to detail and ability to manage multiple drawing updates simultaneously. Comfortable collaborating closely with engineers, operators, and safety personnel. BENEFITS Health, Dental & Vision Insurance Health Savings Account Disability and Life Insurance 401(k) Plan Paid Time Off and Holidays WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. This role is primarily office-based in Oak Ridge, TN, with regular interaction with engineering, operations, and safety teams. Work involves extensive use of CAD software and document management systems. Occasional visits to manufacturing or process areas may be required to verify equipment configurations. Reasonable accommodation will be provided for qualified individuals. Standard Nuclear embraces equal opportunity and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. To conform to U.S. Government export regulations, applicants must be U.S. citizens, lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Join us in our mission to commercialize fusion energy ⚡️ Type One Energy Group is mission-driven to provide sustainable, affordable fusion power to the world. Established in 2019 and venture-backed in 2023, the company is led by a team of globally recognized fusion scientists with a strong track record of building state-of-the-art stellarator fusion machines, together with veteran business leaders experienced in scaling companies and commercializing energy technologies If you are searching for the best new ideas and share our vision, join us as a “Senior CAD Designer”. This is what you need to know: Location: Knoxville, TN Salary: Highly Competitive Plus Benefits Contract: Permanent, full time Reporting to: CAD Integration Manager Your role in the mission: Type One Energy are looking for an experienced Senior CAD Designer who will be responsible for CAD designs for our stellarator fusion technologies. The primary responsibility of the CAD Designer is to create computer aided modeling required to enable the design and fabrication of our fusion devices. You will work closely with Engineers and Scientists and be responsible for the below: Translate mechanical design requirements into an integrated 3D configuration model. Develop interfaces between and among stellarator systems and resolve any conflicts. Develop accurate CAD models based on given specifications. Convert CAD models into technical drawings for fabrication, accurate and concise callouts for fabrication specifications, and help coordinate the fabrication of components. Excellent communication skills including verbal, presentation, and writing skills are required to enable effective interaction with technical peers, program managers, and sponsors. What you'll need: Advanced proficiency in Siemens NX modeling, assemblies, drafting and Teamcenter. Minimum of 10 years' (preferably 15+ years') experience in CAD design for complex mechanical systems. Minimum of 5 years' experience in nuclear systems, fusion engineering, or high temperature materials systems is desirable. Expertise in modeling complex surfaces. Expertise in GD&T and engineering drawing standards. Expertise in parametric modelling. Desired - Experience with ultra-high vacuum systems. Desired - AA or BA in a related engineering or design field, or equivalent work experience. We offer: In addition to a basic salary and yearly bonus, you will also get… Stock and share options 📈 Relocation allowance 💰 Insurance plans 🩺 401k retirement options 💸 And many more great voluntary benefits 👀 Type One Energy applies proven advanced manufacturing methods, modern computational physics and high-field superconducting magnets to develop its optimized stellarator fusion energy system. Its FusionDirect development program pursues the lowest-risk, shortest-schedule path to a fusion power plant over the coming decade, using a partner-intensive and capital-efficient strategy. Type One Energy is committed to community engagement in the development and deployment of its clean energy technology. For more information, visit ********************* or follow us on LinkedIn. Equal Opportunity Statement Type One Energy is an equal opportunity employer. We value diversity, searching for the best new ideas and remaining open to unique perspectives. Therefore, all qualified applicants will receive consideration for employment independent of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristics protected by applicable federal, state, or local laws. All qualified individuals are encouraged to apply.

Grow Your Career in One of the Most Advanced Digital Labs in the U.S. Join a high-tech, fast-growing dental lab where you'll work with EXOCAD, full-arch workflows, and cutting-edge materials. At JB Dental Lab, your work directly impacts patients' lives - and your skills will grow quickly in a supportive, team-focused environment. Why You'll Love Working Here Advanced Technology: Modern digital lab, EXOCAD-driven workflows Career Growth: Accelerated learning in All-on-4, hybrids, and full-arch design Competitive Pay + Signing Bonus Full Benefits: Medical, dental, vision, life, PTO, and 401(k) match Supportive Culture: Family-oriented, collaborative, quality-first What You'll Do Design full-arch implant prosthetics and hybrid dentures using EXOCAD Convert digital scans into precise, aesthetic restorations Interpret dental prescriptions and technical specifications Collaborate with dentists and internal technicians Perform quality checks and support day-to-day lab workflow Qualifications What You Bring Experience with EXOCAD and implant-supported prosthetic design (All-on-4 preferred) Strong understanding of dental anatomy, occlusion, and morphology High attention to detail and strong problem-solving skills Ability to thrive in a fast-paced, quality-driven environment

X-energy LLC conducts a thorough recruiting process and will never issue offers without interview to discuss qualifications and responsibilities. All applications will be submitted via our company career page, ************************* . We will never ask you to provide payment information as part of the recruiting process. If anyone claiming to represent X-energy directs you in a manner otherwise, please contact us at *************************** . Job Description This role is responsible for the design and drafting of 3D models and 2D drawings that may include any of the following (based on the assigned project): define the layout and arrangement of structures, systems, and components (SSCs) of the reactor/plant design. They will coordinate the design, at the direction of responsible engineers, and perform a variety of design/drafting activities, including preparing/updating drawings for projects, preparing assembly/manufacturing drawings, and establishing guidelines and procedures for Computer Aided Design (CAD) data management. The role collects all drawings, data, and notes involved in a project and constructs the final version of the integrated project - specifying dimensions, codes, production methods, and materials in accordance with governing guides, procedures, and industry best practices. Job Profile Tasks/Responsibilities Create relevant 3D CAD models and detailed 2D drawings of various equipment, equipment integration, plant layout, structures, systems and/or components (based on assigned project). These may include, but are not limited to: process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), isometric drawings (Isos), piping arrangements, equipment arrangements, etc. Assess models for manufacturability as well as assembly and integration considerations. Perform a variety of design/drafting activities for the engineering group including preparing and updating manufacturing drawings. Serve as an information source on planning and design of equipment installations: equipment and plant engineering. Maintain notes, design calculations and other documentation (e.g., drawings, bills of materials, lists of design parameters, and performance guarantees) for current and future reference. Identify and follow XE processes, procedures, and guides, as well as best CAD modelling and drafting practices, and maintain communication with other team members to ensure the consistency and standardization of practices and design. Collaborate in planning, scheduling, and organization of detailed phases of engineering work. Adhere to filing guidelines for drawings to maintain up-to-date drawings. Maintain system and model compatibility in X-energy's Product Lifecycle Management (PLM) system and Plant Design Environments (PDE), including the 3D CAD applications. The role may include specialization in one or more of the following areas: Component, System Design: Work closely with the responsible engineers to develop mechanical/ physical concepts, designs, and processes to create SSCs related to the project to which they are assigned. Assist in the definition and development of system/component geometric interfaces. Incorporate 3D representations of components into the plant model and verify compatibility with connecting interfaces. For FOAK design, create and check manufacturing technical data packs and 2D detail component drawings to ensure fabricated components are produced in accordance with the design specifications. For FOAK design, ensure SSCs are properly designed and integrated into the design of the overall system and/or plant to meet their component level functions and requirements. For FOAK design, engage vendors in the design and manufacturing of defined and package systems and their related components. Show initiative in suggesting design changes and improvements to the design of components, factoring in Design for Manufacturing (DFM) and Design for Assembly (DFA) principles. Equipment/Plant Layout Integration Design: Utilize S3D (formerly SmartPlant 3D) to create 3D piping design models within and supporting the SMR plant, including but not limited to equipment layout, pipe routing, pipe support design, maintenance and accessway volumes. Utilize NX or other CAD software to develop 2D and 3D component designs. Maintaining and checking the S3D model to ensure accuracy, and resolution of interferences. Creating Piping isometrics, general equipment layout drawings, material take off lists etc. Application of piping best practices and principles when routing piping. Support procedure inputs and reviews as required. Building relationships that will facilitate knowledge transfer, cross functional knowledge of related work groups, and ability to present work products effectively. Maintain professional demeanor and behavior at all times in all forms of communication. Perform other duties as assigned by manager. Level I: Assist and support team members with the execution of the core tasks and responsibilities, listed in the Job Profile Task/Responsibilities section of this document, under guided supervision. Establish a foundation in CAD/3D drafting and design while deepening understanding of, and experience with, design & analysis tools, processes, and key product development and safety considerations for nuclear systems, structures, and components. Level II: Support team members with the execution of the core tasks and responsibilities, listed in the Job Profile Task/Responsibilities section of this document, under guided supervision. Coordinate with engineering team members, partners, and suppliers to facilitate the convergence of efforts, allow design closure, provide design assurance, and deliver high quality engineering work products. Level III: Execute the core tasks and responsibilities, listed in the Job Profile Task/Responsibilities section of this document, with minimal supervision Level IV: Lead the execution of the core tasks and responsibilities, listed in the Job Profile Task/Responsibilities section of this document, without close supervision and some latitude for independent judgment. Provide feedback and guidance to more junior team members with the execution of the core tasks and responsibilities listed in the Job Profile Task/Responsibilities section of this document. Lead small groups of designers to solve complex technical problems and deliver high quality engineering work products on time and within budget. Level V: Lead the execution of the core tasks and responsibilities, listed in the Job Profile Task/Responsibilities section of this document, without close supervision and extensive latitude for independent judgment. Teach and mentor more junior team members. Stay abreast of industry and academic trends, breakthroughs, and best practices. Job Profile Minimum Qualifications Associate's degree in drafting, CAD, engineering or related degree from an accredited institution or High School Diploma and experience in a role with similar tasks/responsibilities noted above. Experience using AutoCAD Electrical strongly preferred. Experience and/or knowledge in a minimum of one of the following areas (based on assigned type of project): Familiarity with ASME Y14.5 (or similar standards) for Dimensioning and Tolerancing. Experience using 3D CAD software (e.g. UG/NX, SolidWorks, PTC Creo/Pro-E, or similar). Experience using Product Lifecycle Management (PLM) software (e.g. Teamcenter, Windchill, or similar). Experience as a SmartPlant 3D Piping Designer. Strong knowledge of piping drafting and design standards and techniques. Level I: Zero to two years of experience in a CAD/3D drafter/designer. Level II: Typically, three years of experience in a CAD/3D drafter/designer role. Previous experience at X-energy meeting performance standards may be in lieu of years of experience. Level III: Typically, five years of experience in a CAD/3D drafter/designer. Level IV: Typically, ten years of experience in a CAD/3D drafter/designer role. Level V: Typically, fifteen years of experience in a CAD/3D drafter/designer role. Previous experience at X-energy meeting performance standards may be in lieu of years of experience. Location: 151 Lafayette Drive, Suite 300, Oak Ridge, TN Work Site Expectations: 5 days a week in office Travel: 10% Hours: 8:00am-5:00pm, Mon-Fri Compensation As required by Maryland and other applicable state law, X Energy, LLC (X-energy) lists the expected compensation range for a publicly advertised job opportunity based upon the job requirements (e.g. education/training, experience, skill sets, etc.). Individual candidates who meet the job requirements for the posted position will be offered a salary within this range based on their respective levels of education/training, experience, and other qualifications unique to them. Salary ranges may vary based on the specific office location and region referenced in the posting to take into consideration differences in cost of living and may not be reflective of all regions. Please note that compensation ranges listed for US job postings reflect base salary only and do not include benefits or other incentives. A reasonable estimate for this position at the level of experience required is: Level I : $48,750 - $81,250, Level II: $59,100 - $98,500, Level III $74,175 to $123, 625 Level IV $89,025 to $148,375 Level V $103,875 to $173,125 Position Job Classification Full time - Exempt Benefits X Energy, LLC offers a robust benefits package that includes a 401K plan with an employer match, Medical/Dental /Vision Insurance, Life and Disability Insurance, Paid Time Off, and a Tuition Reimbursement/Professional Development policy that supports the continuing education of our employees. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. X Energy, LLC participates in E-Verify. Please visit the links below for more information about E-Verify and the protection of your Right to Work. Right To Work Link: If you have the right to work, don't let anyone take it away (e-verify.gov) E-Verify Participation Link: E-Verify Participation Poster English and Spanish

Job DescriptionSummary MS Technology is seeking a Designer to support client projects by preparing detailed control panels and custom mechanical equipment design drawings using Autodesk Inventor and AutoCad Electrical software. The role includes providing QA/QC support, ensuring deliverables meet rigorous standards, and collaborating effectively in client environments. Responsibilities Perform detailed design activities to include: Preparation of control panel drawings using AutoCad Electrical ; enclosure front, back plate layout and details, cutout details, associated wiring diagrams and Bill of Materials. Preparation of mechanical equipment fabrication drawings using Inventor - assemblies, details and Bill of Materials Provides checking support for deliverables. Design activities are conducted following regimented quality assurance / quality control procedures. Required Experience Minimum of five (5) years' experience utilizing Inventor. And/or Minimum of three (3) years' experience utilizing AutoCad Electrical. Minimum of three (3) years' experience in related field. High School Diploma Microsoft Office Suite. Client projects for this position require US Citizenship. Additional Skills Excellent customer service and communications skills. Ability to work both independently and as part of a team. Ability to deal with conflicts and stressful situations. Microsoft Office Word, Excel, PowerPoint, Access, SharePoint. Benefits: All eligible employees enjoy an excellent benefits package, including medical/dental/vision insurance, short/long-term disability, life insurance, 401(k), paid time off including holidays, and tuition reimbursement. EEO Statement: MSTI is an equal-opportunity employer. All qualified candidates, including individuals with disabilities and protected veterans, are encouraged to apply. MSTI is an E-Verify employer. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: *******************. EEO Employer/Vet/Disabled Powered by JazzHR 9tgZ5l5ren

MS Technology is seeking a Designer to support client projects by preparing detailed control panels and custom mechanical equipment design drawings using Autodesk Inventor and AutoCad Electrical software. The role includes providing QA/QC support, ensuring deliverables meet rigorous standards, and collaborating effectively in client environments. Responsibilities Perform detailed design activities to include: Preparation of control panel drawings using AutoCad Electrical ; enclosure front, back plate layout and details, cutout details, associated wiring diagrams and Bill of Materials. Preparation of mechanical equipment fabrication drawings using Inventor - assemblies, details and Bill of Materials Provides checking support for deliverables. Design activities are conducted following regimented quality assurance / quality control procedures. Required Experience Minimum of five (5) years' experience utilizing Inventor. And/or Minimum of three (3) years' experience utilizing AutoCad Electrical. Minimum of three (3) years' experience in related field. High School Diploma Microsoft Office Suite. Client projects for this position require US Citizenship. Additional Skills Excellent customer service and communications skills. Ability to work both independently and as part of a team. Ability to deal with conflicts and stressful situations. Microsoft Office Word, Excel, PowerPoint, Access, SharePoint. Benefits: All eligible employees enjoy an excellent benefits package, including medical/dental/vision insurance, short/long-term disability, life insurance, 401(k), paid time off including holidays, and tuition reimbursement. EEO Statement: MSTI is an equal-opportunity employer. All qualified candidates, including individuals with disabilities and protected veterans, are encouraged to apply. MSTI is an E-Verify employer. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: *******************. EEO Employer/Vet/Disabled

Job DescriptionOur rapidly-growing construction company is in need of a creative, full-time CAD designer to bring our client's dreams to life! You'll serve as our primary architectural drafter and produce original, computer-generated designs in 2D and 3D. Additional responsibilities include meeting with clients, integrating feedback, and revising designs as requested. Communication skills are a must in this role, as you'll be regularly communicating the design progress to the construction team. Applicants should be experienced design engineers who enjoy highly detailed work, are passionate about working on a project from start to finish, and want to grow their career in the construction industry. Sound like a job you'd love? Please apply today! Compensation: 50000 - 65000 yearly Responsibilities: Work with construction team members to establish a timeline and budget for the design Attend preliminary meetings with the client to understand the project specifications and scope Receive feedback from construction team members and clients and revise designs accordingly Research material properties in large databases to identify the best materials for modeling Utilize computer software to generate 2D and/or 3D designs, depending on the project specifications Notify superintendents and project managers of the design's progress and when the designs are complete Qualifications: Proficient in using architectural design software, such as AutoCAD, AutoDesk BIM, Solidworks, 3DS Max, Chief Architect Premier: Construction Drawings, SketchUp, and Lumion Two-year degree or equivalent experience in architecture, construction engineering, design, or related field is preferred Highly attuned to detail and possess excellent teamwork, organizational, and communication skills At least 2 years of experience in architectural design Stay informed about architectural design software trends and knowledgeable about the industry as a whole About Company Riverview Decks Core Values Prompt & Professional Proactive Communication - We take pride in showing up when we say we will, and treating you with the respect and professionalism that you deserve while communicating with transparency. Service-minded - We naturally like to find solutions to problems and to generally help people in any way we can. We put clients first. Listen more than you speak with the intent to understand - We focus directly on what is being said so that we can be sure to address your primary concerns and objectives. Roll out the red carpet for others as a servant leader - We truly want your experience to be magnificent and filled with joyful milestones that result in an amazing transformation. We are truly here to serve you. Zero Excuses - We tolerate zero excuses in our environment.

As a mid-level Mechanical / HVAC Designer in the Amentum Nuclear Projects and Consulting business unit you will work with Senior level designers to create HVAC equipment, ductwork and piping 3D models. Additional responsibilities will include coordination with other disciplines working in BIM models, working with mechanical engineers, and designers/engineers in other disciplines to deliver a fully coordinated and collaborated project. Designer will be responsible for creating the design deliverables such as orthographic and isometric drawings. Additionally, designers will assist in interference detection and resolution as well as ensuring proper integration with other tools. + High School Diploma/GED + 5+ years using BIM tools for Plant such as: SmartPlant 3D, Revit, BIM/3D software, etc... + Proficiency using design software such as: AutoCAD, and MicroStation + Industrial HVAC ductwork and piping layout design experience + General understanding of Building Mechanical Systems: HVAC/Piping/Plumbing **Preferred Qualifications:** + In addition to the Basic Qualifications the ideal candidate might also have: + 5 or more years of experience preferred. + Trade School or Associates Degree + Strong communication skills. + Exhibit integrity and the highest quality in all activities + Self-motivated, team-focused professional + Self-starter with the ability to learn new design software + Previous nuclear and industrial design experience + Attention to detail **Essential Functions** **Work Environment** Office environment. (95%) Telework is not an option for this role, all work performed from secure office environment. May be exposed to areas of high noise levels, hazardous propellants, explosives, chemicals and industrial facilities. **Physical Requirements:** Appropriate PPE and training will be provided for all conditions. Must be able to move and sit for extended periods (100%) as well as and lift up to 35 lbs (25%).Vision correctable to 20/20. Candidate must have the ability to read and use SmartPlant design software unassisted. **Equipment and Machines:** Standard office equipment - PC, telephone, fax, copier, job related software (SmartPlant design) and other related equipment (90%) **Attendance:** Regular attendance mandatory (100%) Overtime/work outside normal schedule required (as needed) Travel required ( **OTHER ESSENTIAL FUNCTIONS** U.S. Citizenship required. No dual citizens. Valid driver's license is required. Must be able to work in a team atmosphere. Must put forward a professional behavior that enhances productivity and promotes teamwork and cooperation. Must be familiar with and comfortable working in a team environment. Appropriate grooming and dress code acceptable for a customer environment is necessary. Must be able to obtain and maintain a security clearance as required.Must take and passa pre-employment drug and background check. \#NPC