Senior electrical engineer jobs in Cary, NC

At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a talented Senior CQV Engineer to join our team at our office located in _____________. In this role, you will perform cGMP compliance-based services (commissioning, qualification, validation, consulting, etc.) as developed and defined in project agreements with IPS clients. You will also follow IPS and client standards and requirements, overall good industry practices for C/Q/V services, and regulatory requirements. You may also perform standalone commissioning services for non-FDA-regulated clients. Additional Responsibilities Write C/Q/V documents following established standards and templates, including but not limited to the following: Commissioning Forms C/Q/V Protocols and Summary Reports Standard Operating Procedures Impact Assessments Specifications (URS/FRS/DDS) FATS/SATs Perform field/site activities including, but not limited to, the following: Attend and witness FATs and SATs as a representative of IPS clients. Execution of commissioning forms and witnessing of vendor start-up and testing. Execution of C/Q/V protocols. Walkdown and verification of system drawings (P&IDs, as-builts, etc.) Compile data and prepare reports for completed C/Q/V activities including ETOPs, protocol data packages, etc. Assist in deviation investigation and resolution of problems and issues encountered during field execution activities. Work with the Project Delivery department or CM for start-up and vendor testing. Witness and troubleshoot as required. Primary responsibilities include C/Q/V of equipment and systems, including CSV and automation, supporting pharmaceutical, biotech, and medical device industries. Read, understand, and utilize the IPS Best Practices and SOPs for the delivery of compliance services Perform work to meet IPS budget requirements and quality standards. Provide consistent, complete, and timely feedback and reports to IPS project leaders, project managers, or management, of project status and issues, as requested. Come join our dynamic team that creates world-class designs for our clients, and propel your career to new horizons! Qualifications & Requirements Bachelor of Science in Engineering. This is an entry-level position. 7 or more years of relevant experience. Experience in Pharmaceutical, Biotech, Medical Device Design, Construction, Commissioning, Validation, or QA. Preferred Qualifications Experience in writing and execution of PFC, FC, IQ, OQ, and PQ forms/protocols for GMP Utilities, Equipment, Systems, and Software. General exposure and experience in a GMP/Validation discipline with a knowledge and understanding of pharmaceutical Design/Build/Commission/Validation processes and how they relate to regulatory requirements and cGMP regulations within the E.U. and U.S. FDA. Context & Safety This position will have up to 100% travel to the site, or as required by the assigned project. You may be assigned to a client site for an extended period. Overnight travel or staying in the city of the client's location is possible depending on the assignment. Travel will be per the IPS Travel Policy, client-specific travel policy, or project-specific travel plan. You may visit active construction sites and will be required to take site safety training and adhere to site safety rules. This position is a safety-sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. All interviews are conducted either in person or virtually, with video required. About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That's only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here!

Remote (Meet once in a quarter) Durham, NC / Boston, MA / Westlake, TX/ Smithfield, RI/ Merrimack, NH/ Jersey City, NJ 12+ Months Top Skills: OIPA and Oracle DB experience (simple SQL) Need to only know Java so they can fix issues (maintenance role) Requirement: 4+ years of expertise in developing policy administration systems using Oracle Policy Administration System (OIPA), including configuration language, integration, AS Files, data intake, database architecture, and data extraction patterns; building OIPA extensions; and performing palette and application security implementations, screens (policy, roles segment, allocation, and valuation), and release management. Expertise in implementing design patterns, using UML Test Driven Development, Junit, Jasmine, Karma, Protractor IDE's Spring Tool Suite, and Eclipse, within a UNIX and Windows environment. Writing SQL queries and debugging stored procedures within an Oracle environment. Leadership: Team player, self-starter, collaborative, innovative, eager to learn every day. Understanding of docker, cloud-computing / cloud services platforms (e.g. AWS or Azure) will be a plus AWS Certification is a plus In addition to this, cultural fit is key for this group.

About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at ************** and on LinkedIn and Twitter (X). Engineer Position - DV Job Description Summary Analog Devices is committed to investing in our people and their growth. One way we can do this is by establishing a cutting-edge Entry Level Hiring program. This program features high impact professional development, opportunities to drive meaningful projects that are directly tied to business goals, and unique executive exposure. Our duty is to develop the next generation of talent in our communities and provide them with a pathway to apply their academic skills in the real-world. At ADI, our early career hires will learn from the brightest minds who are dedicated to their growth, development, and success. From an industry perspective, incoming new career hires are surrounded by employees that represent the best of the best minds in their respective fields. Apply now for the opportunity to grow your career and help innovate ahead of what's possible! The Data Center & Energy team is seeking a motivated design engineer to provide support to our Cloud Power BU located in Durham, NC, USA. As an individual contributor, the candidate will be working closely with a group of about 15 engineers. The project provides unique learning opportunities related to advanced mixed signal design verification techniques. Responsibilities include, but not limited to: * Verification of mixed signal designs and sub-systems using leading edge verification methodologies. * Contribute and influence the decisions on methodologies to be adopted for the verification. * Architect the testbench and develop in UVM or Formal based verification approaches. Integrate the block testbench in chip-level UVM environment and verify integration. * Define testplans, tests and verification methodology for block / chip-level verification. Work with the design team in generating test-plans and closure of code and functional coverage. * Continuous interaction with analog and digital teams in enabling top-level chip verification. * Support post-silicon verification activities of the products working with design, product evaluation, and applications engineering team. Minimum qualifications * Bachelor's or Master's degree in Electrical or Computer Engineering. * 7+ years of hands-on experience in SystemVerilog/UVM. * Experience in EDA tools and scripting (Python, TCL, Perl, Shell) used to build tools and flows for verification environments. * Experience in architecting and implementing Design Verification infrastructure and executing the full verification cycle. Preferred qualifications * Experience in developing test benches using System Verilog and OVM/UVM. * Knowledge of test-plan generation, coverage analysis, transaction level modeling, pseudo and constrained random techniques, assertion based and formal verification techniques with System Verilog. * Experience of pre and post-silicon verification test flow and automated test benches. * Familiarity with verification on multiphase DC-DC controllers. * Experience with verification of ARM/RISC-V based sub-systems or SoCs. * Experience with verification of voltage interfaces like PMBUS, AVS, SVID, SVI3 etc. * Experience with revision control systems like Perforce, Git etc. * Verilog, C/C++, System C, TCL/Perl/Python/shell-scripting. * RTL design/front-end design experience. * Experience with analog SV-RNM/EE-net modeling * Experience with formal verification methodology. * Strong interpersonal, teamwork and communication skills. * Self-motivated and enthusiastic. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Experienced Required Travel: Yes, 10% of the time Shift Type: 1st Shift/Days

Power your future with Qualus as a Substation Engineer through our Qualus University's 2026 Engineering Boot Camp! Our Engineering Boot Camp is a full-time Engineer I role paired with a structured training and development program built to accelerate your growth in the power industry. As a Boot Camp Engineer, you'll dive into focused classroom instruction led by seasoned Qualus engineers and industry experts, participate in immersive site visits, and gain hands-on substation safety and equipment training. You'll also receive guided preparation for the FE exam to help you build a strong technical foundation from day one. Whether you're drawn to Protection & Controls, Power System Studies, Substation Engineering, or Relay Settings, our four track options give you the runway to grow in the direction that excites you most. If you're ready to build real expertise, make real impact, and start a career with long-term potential, this is your first step. Apply today and join a program designed to turn early-career engineers into industry-ready professionals. As a Substation Design Engineer, you will work alongside Protection & Control Engineers to design physical substation layouts utilizing applicable codes and client standards. Typical designs to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, and AC and DC power systems. The 2026 Engineering Boot Camp, powered by Qualus University, will be starting July 2026. As a program participant, you will receive an offer to be a full-time employee with Qualus. Responsibilities * Coordinate with Substation Design Engineers, Relay Settings Engineers, and other groups to ensure design concurrence. * Design Substations utilizing applicable codes and client standards. Typical design to include general arrangements, equipment and electrical layout, elevation views, cable trench, grounding studies, conduit drawings, grounding grids, lightning protection and grounding plans, AC/DC power systems, and bill of materials. * Complete calculations such as AC/DC load, bus spans, and ampacity. * Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates. * Working on project teams supporting all quality and project management goals. * Meeting all project deadlines and supporting the processes and procedures to meet deadlines. * Maintaining up-to-date technical skills related to the design of electrical substations and protection and control schematics for the electric utility power grid through on-the-job work and formal training. * Substation awareness and Safety consciousness. * Aptitude to quickly learn and apply test procedures for various types of substation equipment. * Good PC skills and the ability to support testing activities as required by the project lead. * Develop drawings and assist in the preparation of design packages using CAD/drafting skills. * Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed. * Consistently following established design standards and CAD drafting standards while assuring quality, accuracy, and completeness. * Identifying process improvement ideas and commuting ideas through appropriate management channels. Qualifications * BS Degree in Electrical Engineering from an ABET-accredited school (Mechanical Engineering degrees accepted for some roles) with a focus on power systems. * Ability to travel up to 10% of the time. * Microsoft Office product application. * Knowledge of AutoCAD and/or MicroStation. * Educational experience directly related to working with [medium to high voltage] electricity (preferred). * Must have the ability to work independently, and accurately, and have high attention to detail. * Strong communication skills and the ability to effectively discuss technical recommendations with customers. * Strong computer skills. #LI-BL1 Benefits & Compensation Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited to education, qualifications, prior relevant work experience and work location. Company Overview Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. EEO At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************.

We are seeking a skilled Substation Engineer to join our power delivery engineering team. The Substation Engineer will be responsible for the design, analysis, and implementation of high-voltage substation projects ranging from 69kV to 500kV. The ideal candidate will have hands-on experience with substation layout, equipment selection, protection and control systems, and integration with transmission and distribution systems.This role involves collaboration across multiple disciplines-including civil, structural, and protection engineering-to ensure high-quality, cost-effective, and reliable designs that meet client and industry standards. Locations Available:- Raleigh, NC- Charlotte, NC- Owings Mills, MD- Summerville, SC- Katy, TX- Baton Rouge, LAResponsibilities: Develop substation physical and electrical designs, including one-line diagrams, three-line diagrams, general arrangements, grounding, conduit, and control schematics. Prepare design drawings, technical specifications, and bill of materials for new and retrofit substation projects. Conduct equipment selection and specify transformers, circuit breakers, switches, buswork, relays, and other substation components. Collaborate with Protection & Control Engineers to integrate relaying and communication systems. Perform load flow, short circuit, and grounding studies as needed. Ensure all engineering deliverables meet NESC, IEEE, ANSI, IEC, and utility standards. Coordinate with internal design teams, utilities, and contractors to ensure technical accuracy and constructability. Participate in site visits to support design verification, construction, and commissioning. Provide technical support during procurement, installation, and testing phases. Maintain project schedules, budgets, and documentation per client and company requirements.

**Power your future with Qualus as a Substation Engineer through our Qualus University's 2026 Engineering Boot Camp!** Our Engineering Boot Camp is a full-time Engineer I role paired with a structured training and development program built to accelerate your growth in the power industry. As a Boot Camp Engineer, you'll dive into focused classroom instruction led by seasoned Qualus engineers and industry experts, participate in immersive site visits, and gain hands-on substation safety and equipment training. You'll also receive guided preparation for the FE exam to help you build a strong technical foundation from day one. Whether you're drawn to Protection & Controls, Power System Studies, Substation Engineering, or Relay Settings, our four track options give you the runway to grow in the direction that excites you most. If you're ready to build real expertise, make real impact, and start a career with long-term potential, this is your first step. Apply today and join a program designed to turn early-career engineers into industry-ready professionals. **As a Substation Design Engineer,** you will work alongside Protection & Control Engineers to design physical substation layouts utilizing applicable codes and client standards. Typical designs to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, and AC and DC power systems. The 2026 Engineering Boot Camp, powered by Qualus University, will be starting July 2026. As a program participant, you will receive an offer to be a full-time employee with Qualus. **Responsibilities** + Coordinate with Substation Design Engineers, Relay Settings Engineers, and other groups to ensure design concurrence. + Design Substations utilizing applicable codes and client standards. Typical design to include general arrangements, equipment and electrical layout, elevation views, cable trench, grounding studies, conduit drawings, grounding grids, lightning protection and grounding plans, AC/DC power systems, and bill of materials. + Complete calculations such as AC/DC load, bus spans, and ampacity. + Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates. + Working on project teams supporting all quality and project management goals. + Meeting all project deadlines and supporting the processes and procedures to meet deadlines. + Maintaining up-to-date technical skills related to the design of electrical substations and protection and control schematics for the electric utility power grid through on-the-job work and formal training. + Substation awareness and Safety consciousness. + Aptitude to quickly learn and apply test procedures for various types of substation equipment. + Good PC skills and the ability to support testing activities as required by the project lead. + Develop drawings and assist in the preparation of design packages using CAD/drafting skills. + Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed. + Consistently following established design standards and CAD drafting standards while assuring quality, accuracy, and completeness. + Identifying process improvement ideas and commuting ideas through appropriate management channels. **Qualifications** + BS Degree in Electrical Engineering from an ABET-accredited school (Mechanical Engineering degrees accepted for some roles) with a focus on power systems. + Ability to travel up to 10% of the time. + Microsoft Office product application. + Knowledge of AutoCAD and/or MicroStation. + Educational experience directly related to working with [medium to high voltage] electricity (preferred). + Must have the ability to work independently, and accurately, and have high attention to detail. + Strong communication skills and the ability to effectively discuss technical recommendations with customers. + Strong computer skills. \#LI-BL1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-NC-Raleigh_ **ID** _2025-4462_ **Category** _Engineering & Advisory_ **Position Type** _Regular Full Time_ **Remote:** _No_

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. This turnkey project execution strategy ensures there is one point of contact to handle projects of any size from beginning to end and allows a cohesive and coordinated Quanta Services team to enter the project life cycle at the earliest stage possible. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. The Supervising Engineer will oversee the detailed design of high voltage substation projects. This role involves managing a team of engineers, designers and support staff to ensure projects are completed on time, within budget, and in compliance with all relevant regulations and standards. The ideal candidate will have a degree in electrical engineering, with extensive experience in performing the detailed design of high voltage substation projects. What You'll Do Review of Vendor documentation and co-ordination with internal Sourcing Team Support to Proposal Team including preparation of Bill of Materials, develop technical concepts and provide Single Line Diagram, Layout plan etc Co-ordinate directly with clients, engineer, sub-contractors and supplier's technical issues, and technical interfaces Plan and perform technical design reviews together with design teams and report technical risks to line management and PM Review Inspection and Test plan, and attend FAT for major Electrical Equipment if required List and report all noted deviations to the engineering specifications, plan and implement corrective actions in co-operation with PM Responsible for answering technical site questions and review / comment of non-conformance reports from site from engineering point of view Other duties as required What You'll Bring Minimum of 7 years' experience in the electric utility industry or EPC Companies performing engineering related duties and/or management for high voltage electrical substation design. Bachelor of Science degree (B.S.) or Graduate degree in Electrical Engineering from an ABET accredited university. P.E. license required. Proven track record of successfully leading multidisciplinary engineering teams and delivering complex projects on time and within budget. Strong technical expertise in electrical engineering, with a comprehensive understanding of engineering principles and practices. Expert knowledge of electric utility engineering and construction standards. Knowledge of utility industry processes including scheduling, contracts, coordinating and managing all disciplines. Knowledge of process and procedures for project controls and estimates. Demonstrated experience supporting external customers. Excellent communication, interpersonal, and leadership skills, with the ability to collaborate effectively with internal teams, clients, and external partners. Knowledge of relevant industry codes, standards, and regulations, including ANSI, ASTM, ACI, AISC, IEEE NEC, NESC, and others. Able to deal with ambiguity and ability to work independently, manage multiple tasks and determine priorities in a complex environment. Travel Requirements: Role will require travel as necessary to achieve job responsibilities, up to 10-15% of the time. What You'll Get Competitive salary and bonus structure. Comprehensive health and retirement benefits. Professional development opportunities. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Salary: Electrical Engineering Manager Company: Morris and Associates Employment Type: Full-Time Salary: Competitive Salary + Benefits About us: Morris & Associates is an employee-owned US-based, global provider of custom process cooling solutions. The company began in 1949 with a focus on providing process cooling solutions to the rapidly expanding poultry processing industry. Since then, we have expanded to provide process cooling solutions around the world for a variety of industries with Morris equipment currently found in 50 countries and 5 continents. Innovation and an intense focus on building valuable partnerships with customers are key factors in our success as well as our reputation as a go-to source for the most challenging process cooling issues. Another cornerstone of our success is our unique ability to lead complicated projects from the initial idea, through design/engineering and manufacturing, to installation as well as on-site service and support. We truly are a one-stop-shop in process cooling solutions. ************************** Job Description: We are seeking an experienced Electrical Engineer to join us as the Team Lead for Industrial control panel design. In this role, you will be responsible for leading a small team of Electrical Designers to design & develop Industrial control panels for various projects. Technical expertise, project management skills, and a strong knowledge of industrial control panel design will be essential to ensure the successful delivery of high-quality control systems. Key Responsibilities: Provide guidance, mentorship, and technical leadership to a small team of designers involved in industrial control panel design projects. Coordinate and delegate tasks to team members, ensuring efficient utilization of resources and adherence to project timelines. Foster a collaborative and inclusive work environment, promoting knowledge sharing, skill development, and continuous improvement within the team. Identify training needs and provide constructive feedback to team members. Lead the design and development of industrial control Panels including electrical schematics, panel layouts, and component selection. Collaborate with cross-functional teams including Mechanical Engineers, Automation Engineers, Project Managers, and Product Line Managers, to ensure the seamless integration of controls Panels with new and existing industrial Equipment. Conduct thorough technical reviews of control panel designs to identify potential issues, recommend improvements, and ensure compliance to Morris and Associates design standards and procedures. Stay updated on regulatory changes related to industrial control panel design and incorporate them into the team's practices. Coordinate with internal and external stakeholders, including customers, and contractors to address technical queries, resolve issues, and ensure compliance with project specifications. Enforce existing standards and procedures. ensure compliance to UL508A standards, and NEC/NFPA codes and regulations. Create and maintain documentation, including design specifications, test procedures, user manuals, and as-built drawings to facilitate future troubleshooting, maintenance, and modifications. Qualifications: Bachelors degree in electrical engineering or a related field. Minimum 5 years of experience in industrial control panel design and engineering Experience in leading and managing a team of designers or engineers. Experience with AutoCAD Electrical is preferred. Strong knowledge of relevant industry standards and regulations, such as UL and NEC/NFPA. Experience designing and testing Mixed Voltage control panels including 12-24VDC and 120-575VAC/ 1-3 Phase/ 50-60Hz. Excellent problem-solving skills, with the ability to analyze complex technical issues and propose effective solutions. project management abilities, including the ability to prioritize tasks, manage competing priorities, and meet deadlines. Effective communication skills, both verbal and written, to collaborate with cross-functional teams and engage with stakeholders. Strong attention to detail, with a focus on quality and accuracy in design and documentation. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Paid Time Off Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!

We are seeking a skilled Electrical Project Engineer to join our dynamic team in Raleigh. The ideal candidate will be responsible for planning, designing, and overseeing electrical projects from conception to completion. This role requires a detail-oriented professional with strong technical expertise and the ability to manage multiple projects simultaneously. Key Responsibilities: - Design and develop electrical systems and components in compliance with industry standards and regulations. - Prepare and review technical specifications, drawings, and documentation for projects. - Coordinate with cross-functional teams, contractors, and vendors to ensure timely project delivery. - Conduct site assessments and provide technical support during installation and commissioning. - Manage project budgets, schedules, and resources effectively. - Ensure adherence to safety standards and quality control measures. Required Skills and Qualifications: - Bachelor's degree in Electrical Engineering or related field. - Proven experience in electrical project management and engineering. - Proficiency in electrical design software (e.g., AutoCAD, Revit, or similar). - Strong problem-solving skills and attention to detail. - Excellent communication and teamwork abilities. - Knowledge of relevant codes and standards (e.g., NEC, IEEE). Preferred Skills: - Experience with renewable energy projects or systems. - Professional Engineering (PE) license in North Carolina. - Familiarity with project management software (e.g., MS Project). Benefits: - Competitive salary and performance-based bonuses. - Comprehensive health, dental, and vision insurance. - 401(k) plan with company match. - Opportunities for professional development and career advancement.

McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We currently have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group as an Electrical Project Engineer (PE) to be located in our Raleigh Corporate Headquarters location. YOUR DAY- TO- DAY WILL INCLUDE: * To act as a technical expert as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of power distribution, lighting, fire alarm and voice/data systems for facility types including healthcare; higher education; institutional facilities; federal, state and local government; K-12 education & support; and other commercial/industrial facilities. * This person serves as the lead electrical engineer for projects, producing design/construction drawings and specifications and acting as the Engineer of Record for the work they perform and by subordinates they supervise. * Acts as the Client interface for project electrical matters. * Undertakes and directs evaluations of electrical equipment/systems, lighting, fire alarm, and specialty building systems, and prepares design computations and assessments. * Generates and oversees electrical design/construction drawings utilizing REVIT and AutoCAD software. * Observes electrical construction progress. * Assesses the condition of electrical systems within existing facilities. * Responsible for completion of electrical design tasks within budget and on schedule. * Assists in the development of subordinate staff in electrical design best practices. * Communicates and coordinates designs, writing of reports and correspondence with other discipline professionals, as well as representatives of the Client organization to complete work efficiently. * Stays current with local, state & federal design standards and regulations. * Helps develop new work and clients related to electrical design services for healthcare; higher education; institutional facilities; federal, state and local government; K-12 education & support; and other commercial/industrial facilities. WHAT YOU NEED: * Bachelor's Degree in Electrical Engineering, or Bachelor's Degree in Architectural Engineering with electrical focus, from an ABET-accredited university. * 4 years minimum of documented applicable experience working on facilities similar to those described above. * Registered Professional Engineer in the State of NC with current NCEES * Process-oriented individual with strong organization, technical and communication skills. * Solid communicator, able to take and understand directives from Project Manager and Senior Electrical Engineer and coordinate efforts with design team. * Strong knowledge of the Microsoft Office suite of software, as well as Bluebeam. * Strong knowledge of the National Electric Code (NEC) commensurate with their years of experience. * Able to complete work consistently with flexibility to accommodate varying project demands. * Significant applicable experience using Autodesk REVIT. Additional experience with AutoCAD is preferred. * Experience leading the design efforts of subordinate staff. * Must maintain a high level of precision and accuracy and be methodical in approach to work. * High technical aptitude, interested in technology and staying current in their field * Ability to climb ladders and perform typical field survey duties of existing facilities. * Must have a valid driver's license and an acceptable motor vehicle and criminal record. WHAT WILL MAKE YOU STAND OUT: * A process-oriented individual with strong organization, technical and communication skills. * A solid communicator, able to take and understand directives from Project Manager and Senior Electrical Engineer and coordinate efforts with design team. * Excellent Client communication skills. * Able to complete work consistently with flexibility to accommodate varying project demands. * Experience leading the design efforts of subordinate staff. * Maintains a high level of precision and accuracy and is methodical in their approach to work. * Has a high technical aptitude, interested in technology and staying current in their field. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: * Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned * Competitive pay + paid holidays, bereavement and parental, medical, and military leave * Multiple office locations to work from: Stick close to home or travel for a change of scenery * Growth opportunities & training: Grow confidently in your career with our mentoring & training options * Professional development: Tuition reimbursement, early career professional program, online courses & more * Work that makes a difference: See the direct impact your work has on our communities * Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We currently have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group as an Electrical Project Engineer (PE) to be located in our Raleigh Corporate Headquarters location. YOUR DAY- TO- DAY WILL INCLUDE: To act as a technical expert as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of power distribution, lighting, fire alarm and voice/data systems for facility types including healthcare; higher education; institutional facilities; federal, state and local government; K-12 education & support; and other commercial/industrial facilities. This person serves as the lead electrical engineer for projects, producing design/construction drawings and specifications and acting as the Engineer of Record for the work they perform and by subordinates they supervise. Acts as the Client interface for project electrical matters. Undertakes and directs evaluations of electrical equipment/systems, lighting, fire alarm, and specialty building systems, and prepares design computations and assessments. Generates and oversees electrical design/construction drawings utilizing REVIT and AutoCAD software. Observes electrical construction progress. Assesses the condition of electrical systems within existing facilities. Responsible for completion of electrical design tasks within budget and on schedule. Assists in the development of subordinate staff in electrical design best practices. Communicates and coordinates designs, writing of reports and correspondence with other discipline professionals, as well as representatives of the Client organization to complete work efficiently. Stays current with local, state & federal design standards and regulations. Helps develop new work and clients related to electrical design services for healthcare; higher education; institutional facilities; federal, state and local government; K-12 education & support; and other commercial/industrial facilities. WHAT YOU NEED: Bachelor's Degree in Electrical Engineering, or Bachelor's Degree in Architectural Engineering with electrical focus, from an ABET-accredited university. 4 years minimum of documented applicable experience working on facilities similar to those described above. Registered Professional Engineer in the State of NC with current NCEES Process-oriented individual with strong organization, technical and communication skills. Solid communicator, able to take and understand directives from Project Manager and Senior Electrical Engineer and coordinate efforts with design team. Strong knowledge of the Microsoft Office suite of software, as well as Bluebeam. Strong knowledge of the National Electric Code (NEC) commensurate with their years of experience. Able to complete work consistently with flexibility to accommodate varying project demands. Significant applicable experience using Autodesk REVIT. Additional experience with AutoCAD is preferred. Experience leading the design efforts of subordinate staff. Must maintain a high level of precision and accuracy and be methodical in approach to work. High technical aptitude, interested in technology and staying current in their field Ability to climb ladders and perform typical field survey duties of existing facilities. Must have a valid driver's license and an acceptable motor vehicle and criminal record. WHAT WILL MAKE YOU STAND OUT: A process-oriented individual with strong organization, technical and communication skills. A solid communicator, able to take and understand directives from Project Manager and Senior Electrical Engineer and coordinate efforts with design team. Excellent Client communication skills. Able to complete work consistently with flexibility to accommodate varying project demands. Experience leading the design efforts of subordinate staff. Maintains a high level of precision and accuracy and is methodical in their approach to work. Has a high technical aptitude, interested in technology and staying current in their field. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned Competitive pay + paid holidays, bereavement and parental, medical, and military leave Multiple office locations to work from: Stick close to home or travel for a change of scenery Growth opportunities & training: Grow confidently in your career with our mentoring & training options Professional development: Tuition reimbursement, early career professional program, online courses & more Work that makes a difference: See the direct impact your work has on our communities Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking a Electrical Engineer to join our Design & Engineering team within the North America Places group. We are looking to grow our team of skilled multi-discipline engineers and engineering consultants throughout North America. The role sits within our Places Global Business Area (GBA). We work with our clients around the world to create, support, and enhance smart, safe, and sustainable places where people live, work, learn and thrive. Places impact on the quality of people's lives through new or redeveloped Data Center, Transit Facility, Commercial and Retail, Mixed-Use Residential, Institutional/Educational, and Social Infrastructure developments. Arcadis is the second largest architectural firm in the world. Join us in our journey to become the largest engineering firm in the world by expanding our reach in the North Carolina region. In this role, you will be accountable for providing first-in-class solutions to internal and external clients through your technical expertise in electrical engineering and associated building systems. You will use your knowledge of building-level power distribution; lighting, emergency power, controls, and similar building systems in combination with an affinity for client interaction to provide sustainable, high-quality deliverables ranging from front end planning reports to issue for Construction document packages. This position has flexible working hours, and you will join a collaborative team that truly values its people. This is a key location based position. While work scopes may be located throughout the United States, we are searching for individuals in the Raleigh area to support our existing world-class Retail, Workplace, Transit and Education architectural practice. Role accountabilities: Sustainable electrical engineering expertise: Have a solid understanding of and ability to develop engineering reports, calculations, drawings, and specifications both directly and indirectly through team members Flexibility: Openness to using existing skills in related areas and comfort with doing new things Entrepreneurial Mindset: Shared ownership of opportunity pursuit, strategy creation, client relationships, attention to quality, and delivery excitement/innovation. Market Presence: Be aware of and engaged in organizations and clients in the region. Have the ability to raise and take ownership of project opportunities. Understanding of global ways of working: Soft skills to be successful within a multicultural environmental with people of differing backgrounds. Ability and flexibility to directly work with teammates throughout the globe. Up to 20% travel may be required which will include overnight stays Qualifications & Experience: Required Qualifications: 6+ or more years' relevant MEP experience within the Retail, Workplace, Transit and Education landscape Professional Engineer in North Carolina Ability to communicate both internally and externally regarding client needs/desires and technical solutions Experience working with projects that utilize Fundamental knowledge of Autodesk Platforms and other digital design tools including Autodesk Construction Cloud (ACC) or Building Information Modelling (BIM) engineered solutions Education BSc/BEng or MSc/MEng or equivalent in engineering Preferred Qualifications: Direct working experience on past projects with Arcadis (including legacy CRTKL and IBI) architects Experience in full-service consulting design firms and coordination with in-house A/E resources Adaptable to new digital tools such as AI in an effort to understand how delivery must change over the short and medium term Practical Sustainability and carbon reduction experience. Experience with urban environments implementing transformative solutions Experience with user-experience-centric-type projects requiring narrow engineering solutions Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,000 - $130,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-JP1

About ERMCO ERMCO (Electric Research and Manufacturing Cooperative, Inc.) is a leading U.S. manufacturer of distribution transformers and engineered electrical solutions serving electric utilities, OEMs, and industrial customers across North America. Headquartered in Dyersburg, Tennessee, ERMCO delivers reliable, high-quality products that power homes, businesses, and communities every day. With a commitment to safety, operational excellence, and continuous improvement, ERMCO is at the forefront of supporting grid modernization and the energy transition. Our vertically integrated operations, customer-focused culture, and investment in people and technology make ERMCO a trusted partner in delivering resilient, sustainable power infrastructure for the future. About GridBridge GridBridge is transforming power delivery for critical applications by combining advanced hardware with embedded software that enables distributed energy resources, enhances grid reliability, and improves efficiency. Founded in 2012, GridBridge has secured contracts with major customers and federal agencies including the NSF, DOE, and NASA. Now a wholly owned subsidiary of ERMCO, we operate with the agility of a startup and the backing of an industry leader. Job Summary The Senior Electrical System Engineer is responsible for the design, integration, and validation of grid-connected and standalone power conversion systems that support the company's Smart Grid and microgrid product lines. This role applies advanced engineering principles to develop and refine high-performance power electronics systems while ensuring reliability, safety, and regulatory compliance. The successful candidate will lead system-level architecture development, testing, compliance validation, and multi-domain integration with embedded controls and mechanical systems, contributing to the development of next-generation of Smart Grid products. Responsibilities * Technical leader for architecture, requirements development and system engineering for new product developments of grid-connected power electronics systems. * Develop and document system-level functional specifications, requirements, and integration plans across electrical, software, and mechanical domains. * Develop and execute system and subsystem/converter test plans to validate functionality, performance, reliability, thermal, EMC, and safety compliance testing, and analyze test data for compliance and performance. * Collaborate with team members and compliance and certification experts to ensure adherence to UL, IEEE, CSA, and EMC standards. * Support or perform the selection, design, and validation of key power components (magnetics, semiconductor devices, gate drivers, circuit protection, and sensors). * Develop requirements for, source, and validate custom or semi-custom components, typically inductors or transformers, for power electronics systems, employing electromagnetic and/or thermal modeling tools, analysis, and hand calculations. * Apply modeling and simulation tools to predict performance, optimize efficiency, and validate design decisions. * Lead integration of subsystems into complete systems. * Work hands-on in lab environments to debug and characterize hardware and system interactions, ensuring safe conditions in high-voltage high-power environments. * Support field validation testing and customer evaluations of new products. * Collaborate closely with software, firmware, and mechanical engineers to ensure cohesive system design and manufacturability. * Mentor and provide technical leadership to more junior engineers * Participate in continuous improvement efforts, driving quality, reliability, and efficiency across product lines. Qualifications * Bachelor's degree (BSEE) required; Master's degree (MSEE) preferred, with a focus in power electronics, electrical engineering, or a related field. * 10+ years of experience in electrical engineering projects in the field of power electronics and/or power systems. * Knowledge of buck/boost, multi-phase/interleaved, DAB, LLC, and H-bridge topologies, and working experience with some of these topologies. * High-voltage (>400V AC or DC) and high-power (>10kVA) applications, including safety isolation, gate drives, current sensors, magnetic components, and isolated communications. * Experience with communications protocols such as ethernet, CAN, I2C and RS-232. * Product development experience for complex power electronics systems, i.e., containing multiple power converters and circuit boards, and embedded control software. * Experience developing systems with multiple embedded MCU, DSP, FPGA or CPU devices. * Experience with grid-connected systems. * Hands-on experience performing system- and subsystem-level validation testing, including thermal, EMI/EMC, and performance verification. * Knowledge of UL, IEEE, CSA, and EMC compliance standards and validation testing methods. * Proficiency with electrical modeling and simulation tools * Familiarity with Design for Manufacturability (DFM), Design for Test (DFT), and reliability engineering practices. * Experience working on team projects including collaboration with software and mechanical engineering functions. * Strong leadership skills, with the ability to guide and mentor junior engineers. * Excellent problem-solving abilities, capable of addressing complex technical challenges independently. * Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and manage stakeholders. * Highly organized, with the ability to manage multiple complex projects and priorities. * Experience conducting failure analysis and implementing corrective actions for design-related issues. Preferred Experience * Exposure to energy storage systems, DC microgrids, DER integration, or EV charging infrastructure. * Experience with DSPs and control integration for power converter applications. * Knowledge of electrical distribution systems and grid interconnection standards. * Exposure to environmentally hardened Industrial rated product development * Experience with kilovolt-level systems, circuits, and components. * Working experience with power semiconductor devices, especially GaN FETs and SiC FETs. Join ERMCO and TRANSFORM your career.

Evergreen Innovation Group, part of the DPR Family of Companies, is seeking an Electrical Project Engineer with 2-5 years of MEP experience in commercial construction. They will work on commercial projects within our core markets: Healthcare, Higher Education, Advanced Technology, Life Sciences, and Commercial. The Electrical Project Engineer will work closely with all members of the project team. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities None. Duties and Responsibilities Providing construction support for MEP systems. Participation and application of EIG's Environmental Health and Safety Plan to consistently maintain injury-free environments including performing weekly safety audits. Understanding and enforcement of contracts between EIG and Subcontractors as well as EIG and DPR. Assist the Superintendent and Project Manager in the implementation of EIG's policies and the execution of the project. Organizing the duties of other Engineers, Field Office Coordinator, Project Accountant, and other assigned project staff. This includes providing direction and prioritization. Participation in trainings and company meetings to facilitate individual and company growth. Organizing and electronically archiving project files for easy access by the project team. Preparation, monitoring, and updating project schedules. Working with the Superintendent to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. Goal-oriented approach to promptly coordinate and resolve project issues within the project team (interfacing with Designers, Engineers, and Owners). Detailed knowledge of the assigned project scopes with 100% hands on approach. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Preparing agendas, documents, meeting minutes, and actions for various meetings including Owner/Architect/Contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. Monitoring testing and inspection record and reports, safety inspection and accident logs and reports, record building permit inspections and signoffs. Required Skills and Abilities We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Grasp of mechanical and electrical engineering concepts. Excellent listening and strong communication skills. Ability to identify and resolve complex issues. Organized work approach with the ability to adapt and adjust as required to support the project's current needs. A desire to seek out and resolve construction problems / conflicts that arise during design and construction phases. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar), and BIM software (AutoCAD, Revit, Navisworks or similar). A strong work ethic, a “can-do” attitude, and a passion for construction. Education and Experience 2+ years of experience as a Project Engineer, preferably within EIG's core markets. Bachelor's degree in Construction Management, Civil Engineering, or related field. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Travel to and from the office as well as assigned job site(s). DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Cybersecurity Intern Pee Dee Electric - 9825 US-74, Lilesville, NC 28091 Division: BITS Summary Description: The Cybersecurity intern must be actively enrolled in a Cybersecurity or approved Computer Science Degree program with an emphasis on Cybersecurity. The interns will be exposed to cybersecurity tooling that is used by assigned electric cooperatives and will be taught how to respond to alerts as well as configuration changes and other adjustments as approved by assigned managers. Interns will learn about cybersecurity assessments and conduct mitigation and new assessments as required. There will be exposure and education to the importance of cybersecurity for day-to-day operations as well as long term impacts. The Cybersecurity intern will be encouraged to make pro-active recommendations as they learn the environment to help mature the existing cybersecurity program. Interns will also be responsible for creating a presentation at the end of the internship to demonstrate knowledge gained and benefit provided. Interns will also be responsible for completing any required work for credit within their degree program. Academic and Trade Qualifications: This internship program requires enrollment in an accredited university and active enrollment in a Cybersecurity or approved Computer Science Program with an emphasis on Cybersecurity. Work Experience: No prior industry work experience required. Experience contributing as a team member is desirable. Responsibilities: Meet with Pee Dee Electric to discuss project assignments, milestones, and deadlines. Work under the supervision of Pee Dee Electric staff member to complete project assignments. Apply technical problem-solving cybersecurity skills to recommend and implement improvements to existing processes. Responsible for making pro-active recommendations to any current cybersecurity environment. Communicating research and results to management through reports and development of presentations. Job Knowledge: The knowledge requirement for the intern program is what has been gained from the degree program enrolled up to the start of the internship. Abilities and Skills: A general understanding of computer hardware and software and the importance of securing information within business systems. A strong desire to expand knowledge and understanding around all things related to a formal cybersecurity program. A natural desire to be proactive when recognizing security gaps and a desire to work with a team. Relationships and Contacts: Reports to: Director of Cybersecurity at NCEMC and a staff member at Pee Dee Electric who will provide work assignments and provide guidance with projects. Internal Relationships: Responsible for maintaining internal relationships with the assigned cooperative staff and leadership. Working Conditions: Daily commuting to Pee Dee Electric office. Work location will be in either normal office conditions or outdoors. Personal Protection Equipment and steel toe boots will be provided. Company Profile: North Carolina's Electric Cooperatives (********************************** is the brand for the family of organizations formed to support the state's 26 local electric cooperatives, including: North Carolina Electric Membership Corporation, the power supplier to many of the electric cooperatives; North Carolina Association of Electric Cooperatives, the cooperatives' trade association; and Tarheel Electric Membership Association, Inc. (TEMA), a central purchasing and materials- supply cooperative. North Carolina Electric Membership Corporation provides equal employment opportunities (EEO) to all applicants for employment.

A Southeastern full service law firm seeks a highly qualified patent agent or associate to join their intellectual property practice in Raleigh, NC. QUALIFICATIONS: Must be registered with the USPTO. 2+ years patent prosecution experience in the following areas: -Electrical Engineering or Computer Science -Wireline and Wireless Networks, Networking and Communication -Data Encoding/Decoding, Data Compression, Signal Processing -Computer Aided Design and Manufacturing (CAD / CAM) -Radar, Antenna, Microwave Engineering and Micro -Computing -Mobile Application Software -Circuit Design QUALIFIED CANDIDATES WILL BE CONTACTED FOR ADDITIONAL CREDENTIALS

REQUIREMENTS Candidates should have prior patent prosecution experience, including application drafting and will have a degree in mechanical engineering, electrical engineering, or similar field. Knowledge and experience with other forms of IP are a plus. Candidates must have outstanding written and oral communication skills, excellent academic credentials, and strong organizational and analytical abilities. Associate candidates must be barred in the state in which they will work. All candidates must be registered with the USPTO. SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our concentrated focus in these areas enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

This role is with RippleMatch's partner companies. RippleMatch partners with hundreds of companies looking to hire top talent. About RippleMatch RippleMatch is your AI-powered job matchmaker. Our platform brings opportunities directly to you by matching you with top employers and jobs you are qualified for. Tell us about your strengths and goals - we'll get you interviews! Leading employers leverage RippleMatch to build high-performing teams and Gen Z job seekers across the country trust RippleMatch to launch and grow their careers. Requirements for the role: Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Hardware Engineering, or a related field. Internship or hands-on project experience in hardware design or a closely related field. Solid understanding of hardware design principles, including circuit design, PCB layout, and system integration. Proficiency with hardware development tools and software, such as Altium Designer, Eagle, or similar PCB design software. Experience in designing, prototyping, and testing electronic hardware components and systems. Strong analytical and problem-solving skills, with the ability to troubleshoot and optimize hardware designs. Proactive approach to learning new tools and techniques in hardware development. Good organizational and project management skills, capable of managing project timelines and contributing to multiple projects simultaneously. Effective communication and interpersonal skills, for collaborating with multidisciplinary teams and communicating technical information. Eagerness to stay updated with the latest advancements in hardware technologies and industry trends.

Company: Morris and Associates Employment Type: Full-Time Salary: Competitive Salary + Benefits About us: Morris & Associates is an employee-owned US-based, global provider of custom process cooling solutions. The company began in 1949 with a focus on providing process cooling solutions to the rapidly expanding poultry processing industry. Since then, we have expanded to provide process cooling solutions around the world for a variety of industries with Morris equipment currently found in 50 countries and 5 continents. Innovation and an intense focus on building valuable partnerships with customers are key factors in our success as well as our reputation as a “go-to” source for the most challenging process cooling issues. Another cornerstone of our success is our unique ability to lead complicated projects from the initial idea, through design/engineering and manufacturing, to installation as well as on-site service and support. We truly are a “one-stop-shop” in process cooling solutions. ************************** Job Description: We are seeking an experienced Electrical Engineer to join us as the Team Lead for Industrial control panel design. In this role, you will be responsible for leading a small team of Electrical Designers to design & develop Industrial control panels for various projects. Technical expertise, project management skills, and a strong knowledge of industrial control panel design will be essential to ensure the successful delivery of high-quality control systems. Key Responsibilities: Provide guidance, mentorship, and technical leadership to a small team of designers involved in industrial control panel design projects. Coordinate and delegate tasks to team members, ensuring efficient utilization of resources and adherence to project timelines. Foster a collaborative and inclusive work environment, promoting knowledge sharing, skill development, and continuous improvement within the team. Identify training needs and provide constructive feedback to team members. Lead the design and development of industrial control Panels including electrical schematics, panel layouts, and component selection. Collaborate with cross-functional teams including Mechanical Engineers, Automation Engineers, Project Managers, and Product Line Managers, to ensure the seamless integration of controls Panels with new and existing industrial Equipment. Conduct thorough technical reviews of control panel designs to identify potential issues, recommend improvements, and ensure compliance to Morris and Associates design standards and procedures. Stay updated on regulatory changes related to industrial control panel design and incorporate them into the team's practices. Coordinate with internal and external stakeholders, including customers, and contractors to address technical queries, resolve issues, and ensure compliance with project specifications. Enforce existing standards and procedures. ensure compliance to UL508A standards, and NEC/NFPA codes and regulations. Create and maintain documentation, including design specifications, test procedures, user manuals, and as-built drawings to facilitate future troubleshooting, maintenance, and modifications. Qualifications: Bachelor's degree in electrical engineering or a related field. Minimum 5 years of experience in industrial control panel design and engineering Experience in leading and managing a team of designers or engineers. Experience with AutoCAD Electrical is preferred. Strong knowledge of relevant industry standards and regulations, such as UL and NEC/NFPA. Experience designing and testing Mixed Voltage control panels including 12-24VDC and 120-575VAC/ 1-3 Phase/ 50-60Hz. Excellent problem-solving skills, with the ability to analyze complex technical issues and propose effective solutions. project management abilities, including the ability to prioritize tasks, manage competing priorities, and meet deadlines. Effective communication skills, both verbal and written, to collaborate with cross-functional teams and engage with stakeholders. Strong attention to detail, with a focus on quality and accuracy in design and documentation. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Paid Time Off Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!