Senior electrical engineer jobs in Irvine, CA - 1,666 jobs

Senior RF Engineer Orange County, CA Our exciting Space client are looking for an RF engineer to be responsible for the RF design for a remote sensing payload, this roles responsibility includes the concept of operations (CONOPS) for the payload on the bus given on orbit constraints such as power, attitude, thermal loads. Being responsible for all aspects include the ground processing. With support as needed from the SAR/DevOps team, they will be responsible for designing and developing the ground-based solution that would work with various ground systems. Success in this role requires someone with very detailed experience with both SAR theory as well as hands on design experience for both the hardware and software. They will need to be a self-starter with strong initiative to assist in planning out the direction, executing on the plan, then adjusting the plan when unknowns become knowns. Key Responsibilities: Analyze and optimize RF design for Synthetic Aperture Radar (SAR) payloads while collaborating with cross-functional teams to meet project specifications Lead the design of complex systems involving high-speed digitizers, low-noise RF circuits, FPGAs, and embedded processors Work closely with SAR Engineers to test and validate SAR payloads and data collections Conduct detailed RF analysis for antennas and antenna arrays Create RF subsystem requirements and derive engineering requirements to meet project goals Perform microwave analysis using Python or similar tools Generate documentation and effectively communicate technical information to audiences of varying technical ability Contribute technical writing to RFIs, RFPs, and other business capture activities Ideal Qualifications: Advanced degree in Electrical Engineering, Computer Engineering, or similar field 8+ years of experience in a similar engineering role (RF Engineering, Electrical Engineering) 4+ years of experience in a spacecraft engineering discipline 4+ years of experience in high-speed electronics and RF design Experience in anechoic testing with phased antenna arrays Expertise in RF test automation and data analysis Expertise in electromagnetics, RF, and antenna theory Familiarity with SAR imaging concepts and system design Mastery of signal processing fundamentals, including the manipulation of complex-valued data Preferred Qualifications: 4+ years of hands-on experience in SAR payload design and integration Experience with assembly, integration, and testing for spacecraft/payloads Experience with embedded programming (C/C++) and FPGA design tools (Verilog/VHDL) Background in software configuration management (SCM) and CI/CD pipelines Experience in Python or scripting languages for test automation Experience with formal verification and validation of space-rated systems Due to Import control requirements candidates will need to be Must be a US person with a current TS/SCI clearance or ability to pursue one.

Job Title: Senior Electrical & I&C Engineer - Water and Wastewater MKN is seeking a Senior Electrical & Instrumentation and Controls (I&C) Engineer to support the planning, design, and implementation of electrical and control systems for water and wastewater infrastructure projects. This role is ideal for a seasoned engineer with deep expertise in power distribution and control systems design, PLC/SCADA design/integration, and process instrumentation. You'll work closely with multidisciplinary teams to deliver technically sound and innovative solutions that serve public agencies and communities throughout California. We are a team-oriented and highly motivated group with offices in Irvine, Oceanside, Arroyo Grande, San Luis Obispo, Bakersfield, Fresno, San Jose, Ventura, and Santa Clarita. MKN strongly believes in and understands the importance of balancing work and personal life. Our recent awards, from Great Place to Work and Zweig Top Firms , are a testament to this value and the support we provide to our fellow team members. Our collaborative work environment and inclusive operating philosophy allow us to maintain a positive work culture while providing excellent service to our clients. Key Responsibilities: Design of electrical power distribution system (i.e. 480VAC and below) and I&C systems design ( for water and wastewater treatment facilities, pump stations, and distribution systems. Medium-voltage design experience is a plus. Develop electrical design drawings and specifications, including single-line diagrams, load calculations, panel layouts/schedules, cable/conduit sizing, grounding system design, indoor/outdoor lighting designs, conduit/cable schedules, protective relaying and metering, UPS and power conditioning systems, lightning and surge protection systems, motors and motor controls, and heat tracing design. Perform power system studies including load flow, short circuit, protective device coordination, arc flash analysis, and harmonic studies, using ETAP or SKM. Develop and specify I&C systems pertaining to process instrumentation (flow, pressure, level, analytical, etc.) and support control logic development and system integration, and develop P&IDs, I/O list, loop wiring diagrams, telemetry design and communication/network system architecture. Produce detailed construction contract drawings, specifications, and cost estimates for bid and permit packages. Coordinate with internal engineering teams, integrators, contractors, clients, and regulatory agencies throughout the project lifecycle. Mentor junior engineers and contribute to MKN's technical standards and design practices. Qualifications: Bachelor's degree in Electrical Engineering or related discipline from an accredited university or college. California Professional Engineer (PE) license in Electrical Engineering or Control Systems (or ability to obtain within 1 year). 5+ years of relevant experience in electrical and I&C design for municipal water and wastewater infrastructure. Strong understanding of low-voltage power systems, motor control, VFDs, MCCs, emergency power systems, and electrical codes and standards (NFPA70-NEC, NFPA 820, NFPA 70E, IEEE). Proven experience with power distribution, lighting, grounding, and PLC controls systems design. Proficient in AutoCAD, Revit, and design/analysis software (ETAP, SKM, RSLogix/Studio 5000). Familiarity with I&C specifications and process instrumentation in water/wastewater environments. Excellent communication skills, a collaborative spirit, and demonstrated ability to manage schedules and budgets. Strong attention to detail, organizational and time management skills, adaptable, agile, and responsive to quick changes in direction, with strategic thinking and problem-solving abilities. Why Join MKN? Be a technical leader on meaningful public infrastructure projects that impact California communities. Join a collaborative, award-winning team committed to innovation and excellence. Enjoy work-life balance, career growth opportunities, and continued professional development. Access competitive compensation and a comprehensive benefits package. Compensation & Benefits: Compensation is based on experience and qualifications. Anticipated salary range: $110,000 - $150,000. MKN offers a competitive benefits package including health insurance, retirement plan, paid time off, and support for licensure, continuing education, and training. Submit your resume and a brief cover letter to **************************** outlining your interest and qualifications for this position. MKN does not sponsor foreign nationals for employment-based visas or permanent residence.

HCLTech is looking for a highly talented and self-motivated Electrical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Design Engineer Position Type: Fulltime Location: Irvine, CA Key Responsibilities: Core Expertise End-to-end New Product Development (NPD) experience including system architecture, design, rapid prototyping, integration, testing, V&V, and design transfer. Strong knowledge of medical capital systems product lifecycle and disposables (e.g., catheters, endoscopes, pumps). Hands-on design experience in analog and digital board design involving microprocessors, microcontrollers, memory, sensors, and amplifiers. Proficiency in interface protocols such as I²C, UART, SPI, USB, and PCI. Expertise in high-density cable design, harnessing, and cabling. Tools & Standards Skilled in ECAD tools (OrCAD, Allegro) for schematic generation and PCB layout, including DFx and Gerber release. Experience in component engineering and BOM creation for prototype, pilot, and production phases. Strong understanding of IEC 60601, FDA submission requirements, and medical regulatory standards. Familiarity with VAVE analysis, vendor qualification, and supplier discussions. Testing & Validation Proficient in using test equipment such as oscilloscopes, multimeters, flow meters, and signal analyzers for troubleshooting and validation. Ability to draft test protocols, generate reports, and perform bench testing, system characterization, and verification. Soft Skills Excellent communication skills and ability to collaborate effectively with cross-functional teams. Strong problem-solving mindset and attention to detail. Education & Experience Bachelor's degree in Electrical Engineering or equivalent (Master's preferred). Minimum 5+ years of relevant experience in electrical design and development. Pay and Benefits Pay Range Minimum: $85000 per year Pay Range Maximum: $130000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Kitchell seeks an experienced and dedicated Senior Electrical Engineer to join our Engineering and Architectural Team in our Irvine office and build a long-term career at one of the most innovative and growth-oriented building companies in the United States. Overview As a Senior Electrical Engineer, you will lead the design and analysis of electrical systems for a variety of projects, from concept through construction. This role involves developing technical specifications, ensuring code compliance, supporting construction and commissioning efforts, and contributing to business development initiatives. Location: This role is located in our Sacramento office and will be eligible for a hybrid schedule after a 60 waiting period. Duties and Responsibilities Prepares electrical system designs, including power distribution and lighting design, at the schematic, design development and construction document phases of a project. Analyzes design and construction issues for solutions and/or incorporation. Develops technical specifications as required. Performs design/constructability reviews. Comments on electrical issues, including cost, design and construction technology. Evaluates site and building conditions and prepares technical reports of investigations. Interprets applicable codes for compliance and applies this knowledge to documents prepared and/or reviewed to ascertain compliance with those codes, standards and requirements. Assists in maintaining log of all revisions to standard drawings and specifications, and manages the file containing current specifications and logs of all proposed changes to the standard documents. Assists in performing value engineering analysis and reviews. Assists the estimating department in the development of conceptual and detailed cost projections. Performs commissioning of electrical systems and monitors activities to ensure that construction, installation and operational testing conform to functional specifications and customer requirements. Supports and participates in business development and marketing efforts including the preparation of proposals and presentations for new work. Assists in the development and implementation of department design and document standards. Stamps engineering documents as required. Applies workplace health and safety policies and procedures to daily activities. Executes additional duties and responsibilities as assigned. Education and Experience Bachelor's degree from an accredited four-year college or university in engineering or related field or equivalent experience required. 10 or more years of position related work experience in engineering or related field. Knowledge and Skills Knowledge of applicable codes and standards required. Knowledge of the architecture, engineering and construction management industry is required. Effective computer skills including proficient use of Word, Excel, Outlook, PowerPoint Bluebeam, Revit and specialized software appropriate to professional qualification required; and scheduling database (Project) software preferred. Effective verbal and written communication skills, including the ability to foster and maintain effective interpersonal relationships is required. Effective organization skills, including the ability to prioritize and plan work is required. Ability to gather and interpret technical or abstract data to resolve extraordinarily difficult and uncommon problems is required. Ability to work well under pressure and adapt to frequent change, delays or unexpected events is required. Ability to manage a team of professionals in the production of quality projects delivered on time and within budget is required. Commitment to the values of Kitchell with attention to honesty and integrity, quality of work, customer satisfaction, people development, profitability and managing change is required. License and Certifications State of California Professional Engineer license is required. A valid driver's license with an acceptable motor vehicle record, free from suspensions or restrictions, is required. Travel Requirements This position is office based in our Irvine, CA Regional Office. Travel requirement is based on project needs through out California. Work Environment While performing the duties of this job, the employee must regularly work in an office and or construction environment. Conditions regularly include exposure to outdoor elements, hot/cold temperatures, wet conditions, noise, atmospheric conditions and cramped quarters. The noise level in the work environment is occasionally loud. Must frequently travel. Physical Requirements While performing the duties of this job, the employee must regularly sit, stand, walk, talk or hear and use hands to finger, feel and handle; frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Must frequently lift and or move 10 pounds and occasionally lift and or move up to 50 pounds. ABOUT OUR COMPANY Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. The annual base salary range for this role is currently $125,000 - $175,000. The Company's salary ranges are determined by role, level, location, and alignment with market data. Individual pay is determined through interviews and an assessment of various factors, including job-related skills, relevant education and experience, abilities of the applicant and equity with other team members. The annual base salary range listed here is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship.

Sustainable Solutions Motive Energy Sustainable Solutions is dedicated to creating sustainable, reliable, and efficient energy systems. We specialize in delivering high-quality Solar PV, Energy Storage Systems (ESS), and Electric Vehicle (EV) infrastructure solutions. Our team values innovation, collaboration, and growth, offering career advancement opportunities as we expand our nationwide footprint. Position Overview: We are seeking a Solar Performance & Commissioning Analyst to support our growing renewable energy portfolio. This position focuses on system performance modeling, production verification, and remote commissioning support for solar PV, ESS, and EV infrastructure projects. The ideal candidate has hands-on technical knowledge of system commissioning but prefers to apply that expertise in a more analytical, office-based setting. You'll ensure projects perform to design expectations by leveraging modeling tools, monitoring platforms, and performance data to validate real-world results and optimize future designs. Key Responsibilities Develop and refine production models using Helioscope, PVsyst, or similar tools to estimate system output based on site conditions and design parameters. Analyze post-installation system performance and identify discrepancies between modeled and actual production. Verify and configure system monitoring platforms (e.g., AlsoEnergy, PowerTrack, SolarEdge, CPS). Support remote commissioning and performance validation for Solar PV and ESS systems. Generate performance reports and provide actionable insights to engineering, construction, and operations teams. Collaborate with field teams to troubleshoot issues and confirm system configurations align with design intent. Maintain detailed documentation of system commissioning and performance data. Participate in the continuous improvement of modeling and monitoring workflows. Required Experience & Qualifications 5+ years of experience in commercial or utility-scale solar energy systems, with a focus on commissioning, system performance, or modeling. Proficiency in Helioscope, PVsyst, or comparable modeling tools. Experience using monitoring platforms such as AlsoEnergy or PowerTrack. Strong analytical skills with the ability to interpret performance data and identify root causes. Excellent communication skills and ability to collaborate across engineering, operations, and customer-facing teams. Preferred Qualifications Experience with energy storage system (ESS) commissioning or performance analysis. Familiarity with network communications (cellular, ethernet, or fiber) as they relate to monitoring systems. NABCEP certification (or in progress). Knowledge of data analysis tools (Excel, Power BI, Python, or similar).

- V&V Engineer/System Verification Engineer rate- $55/hr Job descriptions: V&V Engineer (Verification & Validation Engineer), Matlab/Simulink Bachelor's Engineering degree in computer science, or related field 9 plus years of experience in system/software testing in Aerospace domain Experience in embedded System/software testing is mandatory Experience in scripting or coding implementing test cases into automation test scripts is mandatory Experience in Flight Controls systems or relevant aerospace systems Experience in Avionics standards like DO-178b or ARP-4754A guidelines Execution of test scripts on test environment and debugging Defect tracking and PR process Experience in data transfer protocols such as A429, CAN, etc Experience in Tools such as DOORS, SVN or MKS Soft Skills Excellent communication and leadership abilities. Ability to manage multiple priorities and deliver within deadlines.

Job Title: Sr. Design Quality Engineer - Medical Device Type: 12-Month W2 Contract We're seeking an experienced Senior Design Quality Engineer to support the full product development lifecycle for implantable and electro-mechanical medical devices. The ideal candidate will have strong expertise in Design Controls, Risk Management (FMEA, Hazard Analysis), and Validation (TMV, IQ/OQ/PQ), ensuring compliance with FDA 21 CFR 820, ISO 13485, ISO 14971, and EU-MDR standards. Key Skills: • Design Control & Regulatory Compliance (ISO 13485, 21 CFR 820, EU-MDR) • Risk Management (FMEA, Hazard Analysis) • Electro-mechanical • Design Verification & Validation Testing • Process Validation (TMV, IQ/OQ/PQ) • Supplier Qualification & Design Transfer • Problem Solving / CAPA / Continuous Improvement. Preferred: • Experience with IEC 62304 and IEC 60601-1 • ASQ Certification (Quality/Reliability) • Strong communication & documentation skills. Qualification: • Bachelor's in Engineering/Science with 5+ years, or Master's with 3+ years in Quality/Engineering.

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager Sag tension calculation for transmission tower loading Structure design and analysis and preparing loading trees Assist in the development of design criteria and specifications for transmission line design and procurement of materials Perform peer quality checks Should be familiar with Transmission industry codes and standards Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings Assist Engineer of Record with complex projects and be the lead engineer for smaller projects Provide construction support for high voltage transmission line projects Participate and progress the company culture of knowledge sharing and continuous improvement Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits Apply engineering principals and technical experience address project issues and recommend solutions Additional duties as assigned Required Qualifications Bachelor's degree in engineering from an ABET-accredited college An Engineering-in-Training (EIT) certificate Minimum 2 years of transmission line design experience Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.) Strong attention to detail, team collaboration, organization, and problem-solving skills Ability to work methodically and analytically in a quantitative problem-solving environment Excellent written and verbal communication skills Ability to travel domestically and internationally as needed for project support Preferred Qualifications Prior engineering consulting experience For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We're seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Hour: Monday - Friday 7:30am - 4:30pm Pay: $58,100 - $77,400 Direct Hire **Must be US Citizen or Permanent Resident ***Must be able to pass a background check/drug screen, cannot test positive for marijuana An industry leading manufacturer of gas and liquid analyzers is seeking an Electrical Engineer to join their team. This individual will be responsible for designing, developing, modifying, and evaluating electronic parts, components, or integrated circuitry for electronic equipment, and/or other hardware systems. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works under general supervision. Exercises judgment within defined procedures and practices to determine appropriate action; a certain degree of creativity and latitude is required. Job Duties: · Provides analysis related to the design, development, and implementation of electronic parts, components, or integrated circuitry for hardware systems. · Develops test strategies, devices, and systems. · Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects. · Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. · Performs stress and performance tests on a variety of computer hardware including circuit boards, processors, and wiring. · Operate computer-assisted engineering and design software and equipment to perform engineering tasks. · Designs and modifies PCB/PCA's using ECAD software. · Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements. · Generates architecture for functional components and assists with product architecture. · Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices. · Supports existing products by troubleshooting and failure analysis. · Participates in technical design reviews of existing designs and peer reviews. · Compile data and write reports regarding existing and potential engineering studies and projects. · Briefs others on deliverables, status, and progress. · Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, and charts. · Provides information by collecting, analyzing, and summarizing development and service issues. · Intermediate level experience with design of analog and digital circuits · Ability to test designs to specification. · Circuit analysis skills using applied calculus and algebra, including component stress analysis. · Strong analytical, problem solving, communication and project management skills are required. · Daily availability to include evenings and weekends when necessary to reach goals and deadlines. Qualifications: · Bachelor's degree in a related field · 2 - 5 years directly related experience and/or training · Must have experience with Altium Software · Experience with Functional Safety (SIL) and ATEX Intrinsic Safety (Ex'ia') is a plus · Individuals that have strong communication skills, problem solvers, and project management skills are helpful All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Engineer (Electrical) - Sustainability This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with the organization's requirements and legal limitations governing bond fund expenditures. Position Description: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of Trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned. Minimum Required Qualifications: Bachelor's Degree in in Electrical Engineering. 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction. Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS). California Professional Engineering (PE) license in Electrical Engineering.

We are currently looking for a Civil Project Engineer who is ready to engage in a large alternative delivery (CMGC) project in Los Angeles County. This project is a multi-year project that will widen the 105 freeway from the 405 to the 605. This widening will increase HOV capacity, reduce congestion along the corridor and introduce tolling to the 105. Phase one of the project is starting at $400 Million, and the remaining phases will push the project towards $1.1 Billion. This is a great opportunity to join the team as we are building the first phase and prior to the project breaking ground on the second phase and contribute to the success of this critical project to improve mobility ahead of the 2028 Olympics. The ideal candidate is capable of thinking outside the box, understands multi-staged construction projects, is detailed oriented with experience in heavy civil construction. The position is directly accountable for the safety, financial performance, and team development on site. This position will integrate with the project's structures team that focuses on bridges, walls, shoring and foundations. Your role on the structures team will depend on your desires as well as strengths and previous experience. In addition to self-performing various scopes on the project the structures team will also cultivate and maintain strong relationships with the subcontractors, and suppliers as well LA Metro, Caltrans and the Construction Managers staff. Key Responsibilities: Work On Site to help solve problems that occur during construction Partner with Project Superintendent in development of a project site logistics plan Maintain thorough understanding of the Myers contract with Caltrans Monitor project costs and Job Cost Report Analyze and forecast monthly Total Cost Projection reports Monitor project labor Lead the project's quality process Develop, schedule and lead project teams on submittals, RFI's and Change Orders Develop and maintain effective relationships with the Designer, vendors, subcontractors and owners Implement all applicable Safety Programs. Qualifications: Bachelor's degree in construction management or engineering preferred 2+ Years of Experience in highly complex and related highway or structures construction projects in California. Experienced dealing with subcontracts, subcontractors and self-perform work Experience leading a successful project team, including development of employees and maintaining relationships with external entities Excellent organizational, team management, problem solving, motivational skills Benefits: · Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. · Company provided vehicle or car allowance with fuel card. · Flexible Spending Account (FSA)/Dependent Care FSA · 401K with 8% Match · Life insurance · Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D · Paid time off · Professional development assistance Apply Here: ******************************************************************************* Myers and Sons Construction is a Heavy Civil Construction Company. We specialize in Bridge Construction, Bridge Restoration, Roadway Rehabilitation, Water/Wastewater Treatment Plants, Concrete Bridge Overlays, Concrete Paving and Alternative Delivery Projects, including Design Build, CMGC, CMAR and Progressive Design Build throughout California and Colorado. For more information on our company please visit ****************** Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We design, build, and test next generation weapon systems to give America and its Allies a definitive edge in defense capabilities. Automation and Controls Engineer The Automation and Controls Engineer will design, build, and commission robust manufacturing systems for production of hypersonic-flight components. Success requires a practical application of engineering principles to design, build, test, and commission process hardware, integrate new technologies into our production line, and integrate process equipment and technologies within our production line. We are seeking a hands-on problem solver with strong expertise in electro-mechanical system design and automation systems, as well as experience working with machinery and production environments. The key to excelling in this position is the effective application of mechanical, electrical, and control systems expertise to enable our manufacturing processes. Responsibilities Design, build, customize, and test hardware and control systems for integration into composite manufacturing equipment balancing process requirements, cost and leadtime considerations. Partner with mechanical, materials, and manufacturing engineering teams to align on hardware requirements and design solutions. Mature manufacturing processes via the implementation of process control systems and procedures to ensure production consistency and reliability. Work with suppliers and vendors to define specifications and ensure on-time delivery of equipment for production needs. Troubleshoot hardware malfunction issues to minimize downtime and improve operations. Provide guidance and implement robust plans for hardware maintenance and calibration to ensure reliable operation of the manufacturing equipment. Basic Qualifications Bachelor's degree in mechanical engineering, electrical engineering, aerospace engineering or industrial engineering. 2+ years of experience in a fast-paced aerospace, automotive, or manufacturing production environment. Experience identifying, trouble shooting and rectifying complex manufacturing issues involving multiple production resources in a deadline driven environment. Understanding of manufacturing processes (machining, welding, forming, composites). Strong mechanical aptitude and willingness to engage in hands-on work to test and implement ideas. CAD / CAM (Siemens NX). Computer Programming (Python, C, NodeJS, HTML, CSS). Preferred Skills & Experience Master's degree in mechanical engineering, electrical engineering, aerospace engineering or industrial engineering. 4+ years of experience in a fast-paced aerospace manufacturing and production environment. Automation (PLC programming, Industrial Robotics). CNC Machining. IoT / Connected factory concepts. Networking skills. Leadership Qualities Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to work independently and resolve minor issues in development with minimal oversight and support. High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Our client, an industry leader in engineering and construction, is seeking a Project Engineer to join their team. As a Project Engineer, you will be part of the Engineering Department supporting project development and execution teams. The ideal candidate will demonstrate strong communication skills, problem-solving abilities, and a proactive mindset, which will align successfully within the organization. Job Title: Senior Project Engineer Location: Irwindale, California This role requires a strong foundation in mechanical and electrical engineering, with hands-on experience in CAD tools, prototyping, testing, and interpreting complex technical drawings. Engineers in this role contribute to the development of products used in water quality monitoring, industrial automation, and environmental control systems. Essential Duties & Responsibilities: Conduct fundamental and applied research to improve or generate new products, components, equipment, systems, tests, requirements, and processes. Drive projects by maintaining focus across disciplines and functions on key design aspects, customer needs, system requirements, testing, product growth, and technological trends. Apply deep knowledge across multiple engineering disciplines to lead product innovation and development. Assemble and test prototypes, integrating mechanical and electrical components. Interpret and create detailed mechanical and electrical drawings and schematics. Sustain and support designs across the entire product life cycle. Communicate and collaborate clearly both verbally and in writing. Complete Role Standard Work and deliver all other duties as assigned Required Skills/Abilities : Proficiency in CAD tools (Siemens NX preferred or SolidWorks), Microsoft Office Suite. Familiarity with 3D printing technologies and rapid prototyping. Hands-on experience assembling and troubleshooting electromechanical prototypes preferably sensors. Hands-on experience in assembly, machining, soldering, and related fabrication techniques for electromechanical component development and testing. Experience in testing electromechanical sensors and systems in automation and control systems programming (e.g., PLCs). Experience with sensor design and integration is a strong plus. Experience in designing water quality monitoring equipment or components is preferred. Multi-disciplinary engineering expertise with a strong foundation in mechanical, electrical, and flow mechanics. Be able and willing to work in a fast-paced, agile product development environment-wear multiple hats, be resourceful, and take initiative to get the job done with minimal supervision Education and Experience: Bachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or related field. 5+ years of relevant industrial experience in product development, preferably in sensor and automation industries. Experience with prototype development and CAD-based design required. What's in it for me? Opportunity to work on impactful projects in a dynamic environment Competitive salary package Professional growth and development opportunities Supportive team culture that values diversity and inclusion Work in a collaborative environment that encourages innovation Upon completion of waiting period consultants are eligible for: Medical and Prescription Drug Plans Dental Plan Vision Plan Health Savings Account Health Flexible Spending Account Dependent Care Flexible Spending Account Supplemental Life Insurance Short Term and Long Term Disability Insurance Business Travel Insurance 401(k), Plus Match Weekly Pay If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Title: Traffic Control Plan Designer Classification: Non-Exempt About the Organization RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees. Position Summary: We are seeking a skilled Traffic Control Plan Designer to develop detailed traffic control plans tailored to meet customer-specific requirements. This role involves utilizing computer-aided design (CAD) software to create compliant, effective, and safe traffic management solutions. As a production-focused position, hands-on knowledge of industry tools and equipment is essential for delivering high-quality final products. In this role, you will collaborate with contractors, government agencies, and internal teams to ensure the seamless approval and execution of traffic control plans. Strong organizational and communication skills are key, as you will also assist with scheduling upcoming projects and maintaining effective customer relations. Key Responsibilities: Traffic Control Plan Development: Design temporary traffic control plans (TTCPs) for a variety of projects using CAD software, including Rapid Plan. Regulatory Compliance: Ensure all plans align with MUTCD standards, local government regulations, and project-specific requirements. Plan Submission & Approval: Submit traffic control plans to contractors and governing authorities for review and approval, addressing any required modifications. Scheduling & Coordination: Support the dispatch department in scheduling upcoming work, coordinating with field teams, and maintaining communication with customers. Cross-Functional Collaboration: Work closely with project managers, field supervisors, and government agencies to ensure smooth implementation of traffic control plans. Additional Duties: Perform other related tasks as assigned to support overall project success. Education, Experience & Skills Required: Certification: ATSSA Traffic Control Supervisor certification or equivalent preferred. Technical Skills: Proficiency in AutoCAD and Rapid Plan is highly desirable. Industry Knowledge: Strong understanding of MUTCD guidelines and local government requirements for temporary traffic control. Communication Skills: Excellent verbal, written, and interpersonal communication skills, with the ability to convey technical details clearly. Organizational Skills: Ability to prioritize workload, manage multiple projects, and meet deadlines in a fast-paced environment. Independence & Teamwork: Self-motivated with the ability to work both independently and collaboratively within a team. EOE Statement RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans Pay Range: $20 - $22 per hour

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Our team develops firmware and controls for a diverse array of power conversion systems, encompassing both vehicle and energy products, such as DC fast chargers, residential bidirectional chargers, and onboard power electronics systems. The ideal candidate will support the full software development lifecycle for power electronics and support ECUs, from specification and design to implementation and testing. This will require proficiency in a variety of embedded architectures, from bare metal to RTOS implementations, as well as a deep understanding of modern multi-core 32-bit embedded controller peripherals and architecture. Responsibilities Specification, design, implementation, and testing of both bare metal and RTOS low-level software for power electronics applications Work with/resolve ambiguity in requirements/specifications/designs Design and specify interfaces between application software and firmware Design, develop, implement, and test multicore interfaces and applications Develop multicore, timing critical software architectures Create elegant, efficient real time software components and interfaces Develop software component testing methodologies and implementations to ensure maturity/stability/release readiness Work with hardware and debuggers at a bench and HIL level to verify software operation Design ISO26262 compliant software Document requirements, software design and test procedures and results Qualifications At least a bachelor's degree in computer engineering, electrical engineering or computer science. Master's degree preferred 3+ years of software development experience with real-time embedded C systems Fluency in state-of-the-art embedded software practices using the C programming language Proficiency in version control software processes and techniques (GitFlow, GitLab) Ability to write testing scripts for using scripting languages (Python) Knowledge of software build procedures and the ability to maintain build scripts (SCons preferred, CMake, Makefile) Strong background in real-time software component design and testing Pay Disclosure Salary Range for California Based Candidates: $135,100 - $168,900.00 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. At least a bachelor's degree in computer engineering, electrical engineering or computer science. Master's degree preferred 3+ years of software development experience with real-time embedded C systems Fluency in state-of-the-art embedded software practices using the C programming language Proficiency in version control software processes and techniques (GitFlow, GitLab) Ability to write testing scripts for using scripting languages (Python) Knowledge of software build procedures and the ability to maintain build scripts (SCons preferred, CMake, Makefile) Strong background in real-time software component design and testing Specification, design, implementation, and testing of both bare metal and RTOS low-level software for power electronics applications Work with/resolve ambiguity in requirements/specifications/designs Design and specify interfaces between application software and firmware Design, develop, implement, and test multicore interfaces and applications Develop multicore, timing critical software architectures Create elegant, efficient real time software components and interfaces Develop software component testing methodologies and implementations to ensure maturity/stability/release readiness Work with hardware and debuggers at a bench and HIL level to verify software operation Design ISO26262 compliant software Document requirements, software design and test procedures and results

Show Electronic Engineer Senior - Project Hire/Internal Assignment About the Role & Team: Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us. As the Senior Show Electronic Engineer - Project Hire/Internal Assignment, you will perform Audio / Video Engineering activities related to attractions ride, show and park/resort wide systems. Working within a provided Audio media and/or Video media scope, perform A/V engineering tasks: blue sky system definition, mockups, preliminary media scope and evaluation of creative intent, facility acoustic design and evaluation, delivery and source equipment criteria and selection, facility sizing and supporting infrastructure, production, installation, Test and Adjust. Enforce systems engineering process, discipline, and standards as well as ensuring a quality final product. Take responsibility for budget, schedule, and quality of attraction related deliverables. You will report to the Manager - Show Electronic Engineering. This is a Project Hire position without any guarantee of permanent placement. What You Will Do: Makes decisions and recommendations that influence significant A/V engineering activities for new attractions and theme park lands Establishes and maintains frequent communication with engineers, Audio Media Designers, Acousticians, and members from other organizations and companies, requiring abilities in persuasion and negotiation on important matters Apply creativity, foresight, and engineering judgment to anticipate and address A/V engineering problems, meet program objectives and requirements, and develop standards and guidelines for various engineering activities Contribute to an engineering team throughout all stages of design, documentation, production, installation, testing, and final reporting for complex projects. Ensure that creative and functional objectives are accurately translated into detailed design requirements. Oversee field technicians and support staff as necessary Ensure compliance with A/V department standards and procedures Plan A/V engineering resources and schedules to support estimating Develop specs and test plans Oversee design from blue sky to project turnover Identify, gather, define, and document audiovisual interface requirements for utilities, including specifications for electrical power as well as equipment cooling and heating loads Create, review and approve top-level, layout, and design drawings for electronic subsystems prior to release Identify and collect vendor electronic equipment specifications. Oversee vendor design processes and facilitate the resolution of technical issues arising between vendors Conduct risk analysis and report to management when needed Guide designers in creating facility and equipment drawings. Manage interface requirements between controls, ride mechanics, and audio elements Troubleshoot first article assembly issues directly as needed. Offer electronic contractor assistance and conduct verification of initial assembly and bench testing as needed Review contractor manufacturing and quality documentation to ensure compliance with contractual technical requirements Confirm that A/V equipment installation and acoustic treatments align with project drawings and specifications Identify, troubleshoot, and resolve installation conflicts, interferences, or other issues as they arise Assess A/V system performance to verify it meets all stipulated requirements Required Qualifications & Skills: 7 years or more experience in related field Proficient in AutoCAD. Working knowledge of Revit or a willingness to learn Requires expertise in preparing procurement specifications and design documents, focusing on complex audio and video systems, including equipment selection, system integration, purchasing, and installation Maintain awareness of current audio, acoustic, and video technology globally Possess knowledge and familiarity with relevant industry standards Understand networked audio and video distribution, as well as park-wide systems Have a working understanding of architectural and facility requirements and how discipline-specific products integrate into attractions Demonstrate experience in prototype design Be knowledgeable about Underwriters Laboratory Standards, National Electric Code, and National Fire Protection Association guidelines Clear verbal and written communication with multiple stakeholders Preferred Qualifications & Skills: Strong hardware expertise and hands-on installation experience Ability to work independently, incorporate team input, and adapt to changing requirements Willingness to travel or relocate for up to 6-12 months is essential Develop scripts for Audio Control and Processing systems, including Alcorn V16 and Peavey NION, QSC Q-SYS On-board audio systems Design and Commissioning Industry Certifications Desirable (QSC, Audinate, Avixa, Cisco, BICSI) Education BS in Electronics Engineering, Audio Video Engineering or related field required P.E. License Desired Additional Information Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** #LI-AG3 The hiring range for this position in Glendale, CA is $105,100 - 140,900 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. Job Posting Segment: WDI Creative Development Job Posting Primary Business: Show Systems (WDI) Primary Job Posting Category: Show Systems Engineering Employment Type: Full time Primary City, State, Region, Postal Code: Glendale, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-10-28

Radiant is an El Segundo, CA-based startup building the world's first mass-produced, portable nuclear microreactors. The company's first reactor, Kaleidos, is a 1-megawatt failsafe microreactor that can be transported anywhere power is needed and run for up to five years without the need to refuel. Portable nuclear power with rapid deploy capability can replace similar-sized diesel generators, and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant's unique, practical approach to nuclear development utilizes modern software engineering to rapidly achieve safe, factory-built microreactors that leverage existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor next year at the Idaho National Laboratory, with initial customer deliveries beginning in 2028. Senior Power Electronics Engineer The Senior Power Electronics Engineer will play a pivotal role in the design and development of the power electronics of our nuclear-driven high-speed generator. Responsibilities include but are not limited to the design of high-voltage and high-speed generator drives, DC-DC converters for high-voltage batteries, and standalone and grid-tied inverters. You'll join the Power Conversion and Electrical Systems team responsible for converting mechanical energy generated from a nuclear reactor to electrical energy to deliver to customers. You will own power electronics design, analysis, simulation, and component selection. You will partner cross-functionally with top industry engineers at Radiant, as well as vendors and partner organizations, including government agencies. Your efforts will be instrumental in bringing the first nuclear microreactor to market. Responsibilities and Duties: Design and develop power electronics for a nuclear power generator. Build detailed schematics, select components, PCBA layout, prototype, and validate hardware. Apply EMI/EMC strategies and underlying physics to engineering problems. Utilize expertise in design and validation of gate drivers, power stages, magnetics, and controls. Conduct modeling and detailed simulation of inverters. Own the design and build a fully functioning inverter autonomously. Perform circuit formal analysis, e.g., de-rating and worst-case circuit analysis. Optimize loss, efficiency, and conduct thermal analysis of the inverter. Required Skills and Qualifications: Bachelor's degree in Electrical Engineering, specializing in power electronics. 8+ years of design experience designing high voltage and high power electronics. Desired Skills and Qualifications: Expert with high voltage power semiconductor selection (Si/SiC/GaN, IGBT, Diodes, MOSFETs), gate driver, and protection circuit design. Strong understanding of different PWM switching techniques, DPWM, ZCS, ZVS. Expert with at least one of the common power electronics tools such as PLECS, PSCAD, dSPICE, PSIM, or Simplorer. Solid understanding of capacitor and super-capacitor design and selection, such as electrolytic, film, ceramic, and tantalum. Proficiency in EMI/EMC filter design for stability, noise rejection, and surviving threat signals. Startup experience or ability to work in a fast-paced development environment. Demonstrated experience in embedded programming with C/C++. Additional Requirements Must be willing to work extended hours and weekends as necessary to accomplish our mission. Must work 100% onsite at El Segundo HQ. Total Compensation and Benefits Radiant's new hire compensation package includes base salary, substantial equity grants, and comprehensive benefits. Total compensation and level are determined through a holistic evaluation of your interview performance, experience, education, and qualifications. Benefits and Perks for Eligible Employees: Stock: Substantial incentive stock plan for all full-time employees. Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. One Medical: Sponsored memberships for employees and their dependents. Vision: 100% top tier plan coverage + 50% for dependents. Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. Daily catered lunch. Free snacks and drinks. Flexible PTO policy. Remote workday allocation. Company and team-bonding events, happy hours and in-person camaraderie. Beautiful El Segundo headquarters close to the Pacific Ocean. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls.

We are currently looking for a Construction Project Engineer who is ready to engage in a large alternative delivery (CMGC) project in Los Angeles County. This project is a multi-year project that will add bus lanes from North Hollywood to Pasadena. This widening will increase BRT lanes and capacity. It will be the largest, most impactful BRT CMGC project in Southern California. The project is currently in Pre-Construction and when construction starts, the project size will be over $250 Million Dollars. This is a great opportunity to join the team as we are doing early work packages and prior to the project breaking ground, influencing project design, staging and contribute to the success of this critical project to improve mobility ahead of the 2028 Olympics. We are looking for a person that is capable of thinking outside the box, understands multi-staged construction projects, is detailed oriented with experience in heavy civil construction. The position is directly accountable for the safety, financial performance, and team development on site. This position will integrate with the project's civil team that focuses on MOT, Roadway, Concrete Pavement, Drainage, Electrical and Overhead Signs. Your role on the civil team will depend on your desires as well as strengths and previous experience. In addition to self-performing various scopes on the project the civil team will also cultivate and maintain strong relationships with the subcontractors, and suppliers as well LA Metro, Cities of Glendale, Los Angeles & Pasadena as well as third party Construction Management and Design Staff. Key Responsibilities: Work On Site to help solve problems that occur during construction Partner with Project Superintendent in development of a project site logistics plan Maintain thorough understanding of the Myers contract with Caltrans Monitor project costs and Job Cost Report Analyze and forecast monthly Total Cost Projection reports Monitor project labor Lead the project's quality process Develop, schedule and lead project teams on submittals, RFI's and Change Orders Develop and maintain effective relationships with the Designer, vendors, subcontractors and owners Implement all applicable Safety Programs. Qualifications: Bachelor's Degree in Construction Management or Engineering preferred 2+ Years of Experience in highly complex and related highway or structures construction projects in California. Experienced dealing with subcontracts, subcontractors and self-perform work Experience leading a successful project team, including development of employees and maintaining relationships with external entities Excellent organizational, team management, problem solving, motivational skills. Benefits: · Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. · Company provided vehicle or car allowance and fuel card. · Flexible Spending Account (FSA)/Dependent Care FSA · 401K with 8% Match · Life insurance · Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D · Paid time off · Professional development assistance · Work in a collaborative environment that fosters creativity, support and mutual respect. Apply Here: ******************************************************************************* Myers and Sons Construction is a Heavy Civil Construction Company. We specialize in Bridge Construction, Bridge Restoration, Roadway Rehabilitation, Water/Wastewater Treatment Plants, Concrete Bridge Overlays, Concrete Paving and Alternative Delivery Projects, including Design Build, CMGC, CMAR and Progressive Design Build throughout California and Colorado. For more information on our company please visit ****************** Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status