Top Senior Electrical Engineer Skills

Below we've compiled a list of the most important skills for a Senior Electrical Engineer. We ranked the top skills based on the percentage of Senior Electrical Engineer resumes they appeared on. For example, 7.5% of Senior Electrical Engineer resumes contained Electrical Systems as a skill. Let's find out what skills a Senior Electrical Engineer actually needs in order to be successful in the workplace.

The six most common skills found on Senior Electrical Engineer resumes in 2020. Read below to see the full list.

1. Electrical Systems

high Demand
Here's how Electrical Systems is used in Senior Electrical Engineer jobs:
  • Prepare technical drawings and specifications of electrical systems to ensure that installation and operations conform to standards and project requirements.
  • Supported System requirements definition, configuration and integration of customized Cabin Management Systems, avionics/LRU and electrical systems.
  • Designed electrical systems for projects which included various large stand-by generator designs for mission critical facilities.
  • Provided all design calculations and engineered various electrical systems for numerous office tenant improvement projects.
  • Performed field surveys and data collection for various remodeling and electrical systems upgrade projects.
  • Assist documentation manager in providing method statements and test formats for electrical systems.
  • Design and specification of electrical systems for industrial, commercial and institutional projects.
  • Analyzed electrical systems to confirm configuration / performance consistent with design documents.
  • Prepared FMEA, Data, Root-Cause Failure analysis for complex mechanical/electrical systems.
  • Installed electrical systems of prototype military vehicles, including troubleshooting and testing.
  • Provided technical expertise in avionics/electrical systems as required to various departments.
  • Improved equipment reliability by using infrared inspections of electrical systems.
  • Specialized assistance for complex troubleshooting - avionics and electrical systems.
  • Provided electrical systems design solutions relating to printer controller design.
  • Develop and manage contract documentation for construction of electrical systems.
  • Created build up procedures for manufacturing on Locomotive electrical systems.
  • Reviewed technical specification amendments for electrical systems and EQ.
  • Witness and approve electrical systems during commissioning inspections.
  • Tested and validated Amphibian Vehicles electrical systems.
  • Performed building electrical systems condition assessments.

Show More

2. Control Systems

high Demand
Here's how Control Systems is used in Senior Electrical Engineer jobs:
  • Specialized in designing and implementing automated control systems to improve efficiency and enhance production capability within a continuous process manufacturing environment.
  • Project engineering and management responsibilities for the Operations Department control systems and substation automation projects, and power system studies.
  • Designed and oversaw the complete engineering and design of power distribution and control systems for electrical building systems and infrastructure.
  • Provided applications integration for High Performance Door control systems for automotive manufacturing use of doors for safety.
  • Developed equipment for automatic control systems, including robot/manipulator control and quality control of measuring instruments.
  • Design, develop and manage electrical and hydraulic control systems of manufacturing equipment and machinery.
  • Analyzed and developed closed-loop Proportional Integral Derivative (PID) temperature control systems for lasers.
  • Deck cargo electrical cranes include all their electrical operations and electrical and control systems.
  • Redesigned nuclear power plant electronic safety control systems with focus on reliability and security.
  • Work effectively as software analyst for vehicle control systems and design electrical hardware architectures.
  • Designed updates for electrical control systems for assembly machines with vision guided robotics.
  • Designed highly technical control systems and equipment for specialized packaging equipment and prototypes.
  • Develop Document Control guidelines, develop part numbering and revision control systems.
  • Develop electrical schematics and mechanical assemblies for manufacturing of automation control systems.
  • Developed and implemented data acquisition and control systems for manufacturing execution system.
  • Involved in supporting licensing activities for digital control systems.
  • Designed and programmed microprocessor-based lighting control systems.
  • Developed architecture for machine control systems.
  • Tuned control systems and validated performance.
  • Worked with a team to design Control Systems for an Unmanned Surface Vehicle (USV) using a UHF data Link.

Show More

3. Analog

high Demand
Here's how Analog is used in Senior Electrical Engineer jobs:
  • Designed Analog/Digital Micro-Controller based instruments.
  • Directed the design/modification of Digital and Analog computer circuits, handling any design problems that appeared and required systems research.
  • Executed hardware development for UHF exciter modification with mixed analog/DDS architecture, from requirements to detailed design.
  • Instrument design and development included analog and digital/microprocessor electronics and was completed and taken to production.
  • Developed the motor control algorithms and analog processing for sensing position using motor current feedback.
  • Designed, modified, and analyzed Current and Future Combat Systems included analog/digital circuits.
  • Designed analog and digital motion control electronics for an ophthalmic pattern scanning laser.
  • Designed, implemented and tested analog and digital hardware used in medical technology.
  • Developed wireless digital and analog circuits, and mentored junior engineers.
  • Design includes power electronics, analog/digital embedded controls and layout guidance.
  • Developed Analog and Digital circuitry for broad-band wireless telephony system.
  • Develop electronic circuits utilizing microprocessors, analog and digital devices.
  • Redesign surveillance and security thermal imaging systems included analog/digital circuits.
  • Performed analog circuit modeling using ICAP/4 circuit simulation software.
  • Verify all analog and digital components for obsolescence.
  • Design high precision/performance analog conditioning circuitry.
  • Designed analog filters using operational amplifiers.
  • Design of analog/digital cost sensitive circuits.
  • Aided in the design and layout of 10 power planes (ECL, Analog, Digital) on a motherboard design.
  • Designed a cost-reduction to the above chip in 0.35 ?m; system-level analog and digital design with FET-level analog design.

Show More

4. Test Procedures

high Demand
Here's how Test Procedures is used in Senior Electrical Engineer jobs:
  • Authored requirements documents, verification test procedures and reports, and manufacturing test specifications.
  • Created test procedures to support manufacturing test station specifications and measuring of RF receivers.
  • Identified appropriate testing and defined test procedures with operator interface and provided detailed documentation.
  • Prepared detailed test procedures and product specifications for manufacturing and quality departments.
  • Reviewed and verified conformance matrix of specifications with test procedures and results.
  • Prepared schematics, engineering calculations equipment specifications, and test procedures.
  • Developed technical performance specifications and acceptance test procedures for new units.
  • Verify and comply with engineering documentations standards and test procedures.
  • Developed and documented test procedures for hardware and software verification.
  • Develop, write and perform test procedures based on NASA specified requirements and plan strategies for analysis, test and design.
  • Develop, review and format documents and reports - Technical Requirements documents, Acceptance Test Procedures and Electrical Load Analysis.
  • Work with Configuration Manager, Logistics Engineers and Buyers to update BOM, Manufacturing and V&V Test Procedures.
  • Determine and execute appropriate test procedures for new and used equipment to determine compliance to specification, performance and quality.
  • Developed test protocols, test plan, validation summary reports, and test procedures for Validation & Verification testing.
  • Generated specifications for products, factory test procedures and components; generated bill of materials and change orders.
  • Provided hands-on experience and debugging procedural problems that the Test Team faces with early versions of test procedures.
  • Developed Space Network Test Procedures for certifying USS-CR project equipment, using a Systems Engineering approach.
  • Developed race engine and engine components; performed test procedures, data acquisition techniques and analysis.
  • Design tests and write test procedures to test at both system and circuit card assembly level.
  • Develop test procedures and perform functional testing and troubleshooting of equipment and systems in assigned areas.

Show More

5. Electrical Design

high Demand
Here's how Electrical Design is used in Senior Electrical Engineer jobs:
  • Developed the concept narrative, conducted centralized and distributed essential electrical system distribution study, leading the electrical design effort.
  • Hired to produce electrical design for all products including microprocessor based equipment and related software for manufacturer of electronic safes.
  • Review and check electrical design documents including design drawings and technical specifications of power plant modifications and upgrading design changes.
  • Provided cost estimates, electrical design, calculations, analysis, equipment specifications, construction drawings and installation instructions.
  • Develop electrical design, load calculation, short circuit study, operation guidelines and specifications.
  • Gained advanced knowledge in electrical design, project management, hazardous locations and electrical construction.
  • Handled multiple projects requiring mechanical and electrical design coordination and on-the-fly changes with little supervision.
  • Develop detailed electrical design to integrate avionics systems into rotary wing weapons systems platforms.
  • Team and task management - Lead electrical design engineer of professional product development division.
  • Conceptualized the initial electrical design approach for major phases of large government facility.
  • Prepared and submitted electrical designs and as-built drawings to project administration/consultant for approval.
  • Provided standardized electrical design documentation and procedures to insure product requirements were fulfilled.
  • Conducted NSPAR engineering review boards with Northrop Grumman electrical design organizations and subcontractors.
  • Peer reviewed and provided comments to electrical design drawings produced by outside consultants.
  • Exercise critical judgment regarding electrical design questions, specifications and schedule management.
  • Review of Electrical design and specifications prepared by outside Consulting Companies.
  • Performed electrical design on a Project Team for horizontal/vertical CT scanner.
  • Reviewed electrical design of engineer/architect and Siemens combustion turbine generator design.
  • Coordinated electrical design with mechanical and plumbing and civil engineering disciplines.
  • Performed electrical design and calculations for three large laboratory projects.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. PCB

high Demand
Here's how PCB is used in Senior Electrical Engineer jobs:
  • Cable wiring assemblies provided essential electrical characteristics for multiple power supply distribution and high speed data communications between numerous PCB modules.
  • Reduced project cost and development time by eliminating two scheduled PCB/Flex iterations from development process.
  • Manage PCB and electronic component vendors, and electrical engineering documentation and material specifications.
  • Provided technical support to customer on PCB manufacturing process.
  • Maintained responsibilities for the PCB auto-check utility.
  • Performed signal integrity analysis in PCB design.
  • Design power supplies, verify the design through simulation, and provide direction to PCB layout for optimal power converter performance.
  • Developed PCB functional test system common hardware platform, which greatly reduced development time needed to develop stand-alone PCB test fixtures.
  • Completed designs with the tasks including schematic design, PCB layout, software design, coding and interfacing with contract manufacturers.
  • Provided reverse engineering and design services for Houston based equipment including PCB layout, assembly, parts procurement and documentation.
  • Designed more than 10 PCBA's, including layout of 4 and worked closely with layout engineers on the others.
  • Utilized OrCAD for schematic capture, PADS for PCB layout, and a SPICE like program for circuit simulation.
  • Traveled to Mexico to train and oversee manufacturing operations and assembly of PCBA, for Final integration of assemblies.
  • Designed an RGB LED source PCB used in the Phoenix ID/AST(Identification and Antimicrobial Susceptibility Test) instrument.
  • Developed and installed 8 PCBA functional test fixtures at the assembly vendor plant to support Manufacturing after design transfer.
  • SPICE circuit simulation and model extraction for power-management IC's, used for circuit/PCB optimization in ongoing product design.
  • Design activities included early stage of requirements review to detail design and final stage of PCB layout and routing.
  • Design activities include instrumentation package design, FPGA programming, PCB design/layout, mechanical design, and software development.
  • Designed multiple machine systems and PCBA solutions within time and cost constraints that provided high reliability for extreme environments.
  • Group Lead of a team of Test Engineers who designed PCBA tests for 8mm tape drives and libraries.

Show More

7. PLC

high Demand
Here's how PLC is used in Senior Electrical Engineer jobs:
  • Delivered/developed software (using PLC) for leading edge automated technology equipment.
  • Designed, installed, and programmed TI 545 PLC System to upgrade electrical controls on an older York Chiller System.
  • Developed Quantum PLC code which interfaced with the relay-devices such that operator interface and alarming may be obtained and recorded.
  • Created system to store PLC, CNC, operator interface programs and drawings for over 150 machines for QS-9000 compliance.
  • Designed and built test fixtures using a programmable logic controller (PLC) to aid in evaluation and troubleshooting.
  • Write PLC code for hydraulic circuits on Extrusion presses, Open/Closed Die forging presses, and Ring Rollers.
  • Create programming for Allen Bradley ControlLogix, CompactLogix, SLC, and MicroLogix series of PLC's.
  • Received the latest training on PLC programs, including Siemens S7, AB, ABB and Mitsubishi.
  • Designed part fault detection for PLC and CNC controlled machinery utilizing a variety of different measuring techniques.
  • Developed Visual Basic algorithms and wrote programs for PLC (ladder logic) for machine control.
  • Designed and implemented the complete Control System and DCS with Allen-Bradley 5/30 PLC and ICOM software.
  • Programmed Siemens S7 300 and 400 PLC's for Data collection and Display on production Screen.
  • Prepared schematics/wiring for local control stations, DCS input/output assignments, DCS/PLC upgrades, single-line modifications.
  • Designed/Installed electrical and controls using Allen-Bradley PLC and Industrial Computers for a Man Machine Interface system.
  • Programmed Allen-Bradley PLC5/30, programmed Panel View for each filler, designed controls and managed project.
  • Work consisted mainly of power design, lighting, and PLC automation of certain operations.
  • Designed Japanese customer specials, safety interlocks, PLC control circuits & software, etc.
  • Produced PLC control drawings for migration from Relay Control system to PLC controlled operation.
  • Design, develop, construct, install and write PLC Programs for production lines.
  • Replaced PLC electronics with KMC universal motor driver board and a single board computer.

Show More

8. Transformers

high Demand
Here's how Transformers is used in Senior Electrical Engineer jobs:
  • Created specifications and tested procedures for permanent magnet generators, rectifiers, power transformers and distribution panels.
  • Calculate Primary and Secondary currents to size Distribution Transformers, Secondary/Service conductors.
  • Prepared technical bid evaluation for prefabricated substation and power transformers.
  • Evaluated four overheating transformers and implementing corrective repairs.
  • Provided technical assistance on MV & HV ABB Motors, AC/DC Drives, Transformers and Electrical Power equipment.
  • Supervised the installation, testing and commissioning of HT & LT panels, motors and transformers.
  • Specified and purchased Instrumentation, Motor Control centers (MCC), Drives, and Transformers.
  • Inspected substation power transformers during failures and maintenance to assess the condition of the apparatus.
  • Used voltage transformers with substation circuit & equipment protection, synchronization, & metering schemes.
  • Finalized protective relay settings for generators and power transformers, feeders and motors.
  • Designed transformers, soft starts and MCC to support nine 4500 hp compressors.
  • Demonstrated competencies to resolve issues pertaining to Overloaded Transformers in New England.
  • Installed two 10 MVA transformers to replace two 7500 KVA transformers.
  • Worked in offsite substation work including a medium voltage line, procurement of substation transformers, poles and bulk materials.
  • Designed 26dB Micro-Strip Power Coupler; transmission line transformers; PI, L, and T type matching circuits.
  • Provided specifications for the purchase of the 138kV equipment, transformers, 34.5kV equipment and various substation components.
  • Contract includes GIS, 220kV underground cable, Isophase bus, main strep up and station service transformers.
  • Sized substation current transformers with multi-ratio bushing type for relaying and metering schemes.
  • Study of fuse sizing for 69 kV substation transformers.
  • Power transformers (2000 kVA - 20 MVA).

Show More

9. Engineering Support

high Demand
Here's how Engineering Support is used in Senior Electrical Engineer jobs:
  • Provided on-site engineering support in the domestic and international markets giving technical direction and chairing sales line-up and installation review meetings.
  • Provide electrical engineering support, including leading, initiating, preparing and supporting capital projects through successful start-up and optimization.
  • Reviewed proposed designs for potential EMI vulnerability, suggested and provided redesign Engineering support for Analog and Digital circuitry.
  • Provided controls and electrical engineering support sustaining over 1,000 unionized associates delivering $500 million in annualized sales.
  • Provided engineering support for Proposal Management to price projects and draft documents with accurate information and concept drawings.
  • Provided electronic design engineering support to NASA Langley s Electronic Systems Branch science and technology development efforts.
  • Embedded engineering support on a novel IVD system - electrical design verification and thermal management testing.
  • Support capitol equipment installations by providing engineering support, electrical design and coordination of electrical contractors.
  • Provide day-to-day engineering support of failed hardware and test equipment to facilitate meeting contractual on-time deliveries.
  • Supervised engineers and technicians responsible for providing electrical engineering support for product and automated manufacturing equipment.
  • Contract with HollyFrontier through AIM Project management and electrical engineering support for major facility expansion.
  • Provided engineering support to hybrid production, troubleshooting both analog and digital hybrid micro modules.
  • Provided obsolete parts quick replacement; engineering support for purchasing team and manufacturing group.
  • Provided engineering support to resolve installation problems during the implementation of the modification packages.
  • Provide ongoing Engineering support to existing electrical designs which improve reliability or reduce costs.
  • Provided system-engineering support to MILSTAR payload testing, generated command and telemetry lists.
  • Provided Technical Engineering support for four major Capital Improvement projects completing three.
  • Provided engineering support of a family of legacy scanning and diagnostic products.
  • Provide plant engineering support and project management for capital budget projects.
  • Provide engineering support to production manufacturing assembly and filed failure/modification.

Show More

10. Fpga

high Demand
Here's how Fpga is used in Senior Electrical Engineer jobs:
  • Increased sales and revenue by developing an integrated customer-specific FPGA-based board to customer's satisfaction.
  • Embedded logic analyzer and timing closure/floor planning tools to facilitate FPGA development and integration.
  • Performed high-level design of FPGA including high-speed serial board-to-board messaging structure.
  • Re-designed control circuitry including FPGA/DSP & analog circuitry.
  • Phase modulation control accomplished utilizing Lattice FPGA.
  • Design experience includes stepper motor drive circuit design, FPGA firmware design, X-Ray Power supply design, and analog design.
  • Designed, developed and verified FPGA and DSP based embedded hardware systems for communications, RADAR, SONAR and video applications.
  • Design incorporates FPGA control of the image sensors and high-speed analog/digital converters and an interface to a PCI Express bus.
  • Designed the firmware for FPGA to do data processing and interface with microprocessor, memory systems, and analog drivers.
  • Designed and debugged analog/digital control board based on ALTERA Cyclone FPGA and soft-core NIOS II processor(SOPC).
  • Attended UC Berkeley Extension courses in: FPGA's for DSP's, and CMOS/BiCMOS analog circuit design.
  • Developed a high torque low voltage and current micro-stepping stepper motor controller using an H-Bridge and an FPGA.
  • Designed a system board for a new home kidney dialysis machine using FPGA's as the system controllers.
  • Lead FPGA developer on multiple projects responsible for concept definition, staffing, work breakdown, and scheduling.
  • Specified all test functions, partitioned those functions between electronic board assemblies, FPGA firmware and software.
  • Developed FPGA based design with isolated I/O, indicators and bidirectional data bus using HDL programming language.
  • Led digital firmware requirements definition, design, simulation, and testing and integration for embedded FPGA.
  • Provide oversight and support for CPLD / FPGA verification and validation for video and air data products.
  • Designed and developed seven FPGA (VHDL / ModelSim) systems and LCD panel controller boards.
  • Design and support fielding of Programmable Gate Array (FPGA) and other Programmable Logic Platforms.

Show More

11. Switchgear

high Demand
Here's how Switchgear is used in Senior Electrical Engineer jobs:
  • Provide regular technical guidance to 4 Reliability centers for motor, transformer and switchgear refurbishment and replacement.
  • Design of diesel powered electric generators and switchgear.
  • Developed relay protection and metering system for medium and low-voltage switchgear and motor control schematic diagrams, and distribution panel layouts.
  • Power Transformer, LV Switchgears, AC & DC UPS and HV & LV cables Review and Checking of Subcontracted Documents.
  • Experienced in medium, high and low voltage power distribution systems, power transformers, switchgear, and generators.
  • Designed the safety architecture of the system by selecting switchgear, transformers, switches ensuring a safe operating environment.
  • Performed sizing and conceptual design of cable bus routing, selection and placement of new 480V switchgear.
  • Performed on site testing and set low voltage and Medium Voltage breakers for the switchboards and switchgears.
  • Supervised installation of switchgears and electric machines in a 400,000 square feet warehouse and office building.
  • Perform Power testing of relay systems on protective relay panels and Medium Voltage Switchgear line ups.
  • Maintained refinery electrical equipment namely switchgear, transformers, cables, motors, UPS, etc.
  • Developed the controls and paralleling switchgear for 2, 1.5MW DE Gen Sets at 4160 VAC.
  • Carried out electrical short circuit calculations for the sizing of generators, transformers and main switchgears.
  • Lead Engineer on this Electrical upgrade to Switchgear, MCC's, and Control system.
  • Worked on the 4160V switchgear, one-line and power load analysis of the LHD 8.
  • Prepared/checked specifications for MCC's, UPS, switchgear, ATS and relay cabinets.
  • Power Calculation and Design of Switchgears, Transformer, Cable, Transfer Switches etc.
  • Performed witness testing for the acceptance test of medium voltage switchgear and drives.
  • Performed engineering of industrial/commercial power distributions, substations, SUPS, and switchgear.
  • Engineer and schedule the installation and checkout of 15KV and 5KV Switchgears.

Show More

12. High Voltage

high Demand
Here's how High Voltage is used in Senior Electrical Engineer jobs:
  • Supervised addition of Data Acquisition system using High voltage Transmission high-frequency transmittal for data communication.
  • Provide Engineering and Specifications backup to project managers for high voltage substations
  • Uncovered high voltage transformer error, rebuilt units avoiding catastrophic failure.
  • Design and Production engineer and consultant for manufacturers of High Voltage components
  • Design of high voltage distribution systems and secondary substations.
  • Designed high voltage charging/shocking system.
  • Required techniques included high voltage RF signal management, high speed digital signal routing, and adherence to IPC-2221 and IPC-2222.
  • Specified and managed the design and procurement of high voltage substations provided on a turnkey basis by outside engineering firms.
  • Major power distribution, Back-up generating systems, UPS critical power, Low, Medium Voltage and High Voltage.
  • Assisted the High Voltage Shop in replacing all electric meters to a network-based system accessible from the shop server.
  • Supervised installation, testing and commissioning of electric works, high voltage power devices, and 500KVA Generator.
  • Designed prototype RF to DC converter rectifier circuit and integrated high voltage charge pump for MEMS actuator program.
  • Guided the Executive Committee in decision making regarding proper design and maintenance of medium and high voltage equipment.
  • Lead the setup and testing of high voltage-driven HVAC components (compressors, fans, etc.).
  • Designed a high voltage, resonant, power converter delivering 500 and 180 volts at low current.
  • Design control boards, modules for new and old high voltage, high power rate power supplies.
  • Optimized the high voltage transformer, designed a 100volt/second rise and fall time critical for instrument operation.
  • Mentored engineers in the design of defibrillator high voltage chargers and switch mode power supplies.
  • Designed High Voltage Resonant DC-DC converter from 400 V to 30 Volts at 25 A.
  • Design Lead on various plant-wide high voltage/current projects for the Department of Energy/Rockwell International.

Show More

13. Technical Support

high Demand
Here's how Technical Support is used in Senior Electrical Engineer jobs:
  • Provided effective technical support to engineering regarding electronic component qualification, product evaluation, and cost estimation.
  • Developed next generation system architecture for new equipment installations and provided technical support to process groups.
  • Orchestrate technical support for development of electrical schematic, 3D harness routing and documentation.
  • Provided ongoing technical support and troubleshooting of digital subsystems of legacy RF systems.
  • Facilitated cross-functional team efforts providing leadership & technical support for product development.
  • Provided Customer interface, Design verification, Production control, Technical support.
  • Provided technical support to the purchasing department for new supplier qualification.
  • Provided technical support in the execution of electrical and instrumentation projects.
  • Provide expert technical support and recommendation to field engineers and customers.
  • Extended technical support to sales in developing engineering solutions for customers.
  • Provided technical support to engineers to resolve electrical harness design issues.
  • Provide engineering and accreditation technical support to Machinery Control Systems.
  • Provide technical support to corporate Marketing and Sales organizations.
  • Provided technical support during analysis, testing and verification/validation.
  • Provide technical support to the team for electrical engineering problems
  • Provide technical support during installation and start-up.
  • Provide owner operator training and technical support.
  • Provide technical support to marketing and manufacturing.
  • Give technical support to installation contractors and perform site visits as needed to aid in the timely completion of projects.
  • Performed start-up, shutdown, and synchronizing activity of coal fired power plant and provided on shift operation technical support.

Show More

14. Project Management

high Demand
Here's how Project Management is used in Senior Electrical Engineer jobs:
  • Mentored/supervised electrical engineer and top-performing management team to steer projects using project management best practices in order to increase project effectiveness.
  • Demonstrated application of integrated project management, technical consistent process, earned value, risk and opportunity management.
  • Performed project management and construction management for all project assigned that requires electrical engineering knowledge and expertise.
  • Performed maintenance oversight, schedule compliance, and project management for various plant outage-related maintenance activities.
  • Provided project management of ordnance grounding systems for Santa Cruz Facility ordnance manufacturing and testing operations.
  • Perform project management analysis techniques for standard projects by preparing and updating a project schedule.
  • Provided project management oversight for various plant modifications, from conception to final acceptance testing.
  • Lead Electrical Project Management and coordination with customers to ensure on-time within budget delivery.
  • Project Management utilizing PERT and CMP methodologies for optimization including earn value credits.
  • Cost estimate and project management of 4.5 million dollar electrical power distribution system.
  • Project Management & Design of electronic interface for new generation pneumatic product.
  • Project management where custom content of projects are predominantly electrical.
  • Supervised project management including overall planning and schedule.
  • Performed commissioning services and project management for USACE at Ft Jackson while sitting in for USACE prime engineer while on deployment.
  • Execute design functions and project management tasks as an Electrical Engineer in the Project Engineering Services (PES) Aiken group.
  • Provided electrical project management of test support fixture for 6.4% scale model of space shuttle orbiter engine failure analysis testing.
  • PROJECT MANAGEMENT/ FIELD REPRESENTATIVE, local stainless and alloy manufacturer - On site project management role for an industrial project.
  • Support project management with maintaining project scope, schedule, and budget on target to achieve a high profit margin.
  • Project Management: This and additional projects in the region completed for RW Armstrong, US-based consulting company.
  • Managed failure analysis and the resolution process with systems engineering, QA, project management and the customer.

Show More

15. CAD

average Demand
Here's how CAD is used in Senior Electrical Engineer jobs:
  • Facilitated deployment of fiber optic SCADA system in conjunction with upgrading fiber optic media converters relay and control equipment.
  • Designed, developed and implemented data acquisition/mini SCADA system throughout the vessel with remote telemetry to support vessels.
  • Developed macros and support libraries for Cadence Schematic Capture to improve documentation accuracy and efficiency.
  • Researched existing substation relay protection systems and devices for Lead-Acid to NiCad battery conversion.
  • Developed Auto-CADD drawings, purchase specification for manufacturing and generated BOM structure.
  • Developed CAD/CAE standards, training and procedures for electronic engineering departments.
  • Specified and sketched mechanical/electrical working specifications on CADAM.
  • Supervised and mentored junior engineers and CAD operators.
  • Created function-based troubleshooting schematics using OrCad.
  • Engineered electrical low voltage and medium voltage power distribution systems, building lightning, fire protection, security and SCADA systems.
  • Develop plans and long term strategies and standards for integrating and networking engineering's CAD/CAE, PC's and MAC'S.
  • Implemented accessibility of critical manufacturing process data for process & quality purposes by introducing plant wide Ignition system (SCADA).
  • Manage and direct the creation of design drawings with Cad designers based on the design criteria and the solutions presented.
  • Introduced and successfully implemented new schematic capture and board layout CAD tool, including creation of most library parts.
  • Performed design analyses using Cadence PSPICE on Reaction Wheel Assemblies used for positioning commercial and military satellites in space.
  • Reviewed the design of the Overhead Collector system, Collector system Main substation and the SCADA communication systems drawings.
  • Designed state-of-the-art large molding machine automation systems using ELCAD designer tools and SAP for the BOM parts entry system.
  • Operate computer-assisted engineering and design software (ACAD) and associated equipment to perform Engineering tasks as required.
  • Performed detailed circuit design utilizing simulation (LTSPICE), schematic capture (Cadence Allegro & PCAD).
  • Circuit design and interfacing microprocessor with sensors, keypads, display, memory and schematic capture using OrCad.

Show More

16. Electric Motors

average Demand
Here's how Electric Motors is used in Senior Electrical Engineer jobs:
  • Collaborate with Technical University of Cluj-Napoca on electric motors design & test bench implementation.
  • Moved on to design and prototyping for small AC and DC electric motors.
  • Project Engineer and design lead for Texas Eastman project that replaced large steam turbines with electric motors.

Show More

17. System Design

average Demand
Here's how System Design is used in Senior Electrical Engineer jobs:
  • Led electrical, mechanical, firmware and system designers working on analyzing and improving quality defects of medication dispensing products.
  • Mentored teams of entry-level electrical and software engineers in system design for unmanned ground robotics.
  • Contributed to the development of a commercial personal information system designed for the boating industry.
  • Total automation control system design, including power distribution, programming, specification and commissioning.
  • Performed systems reviews, defined system requirements, and created system design documentation.
  • Provided colleagues guidance in solving electrical system design errors and solutions.
  • Directed contract companies responsible for electronic and mechanical system design.
  • Conduct verification and reliability testing of new system designs.
  • Flight and maintenance simulation system design and integration.
  • Conducted electrical testing to validate system designs.
  • Involved in time division multiplexer system design and phase lock loop design required for synchronization of both sides of the link.
  • Orchestrated wide-ranging operations associated with power system design, simulation, R&D, technical reports, and formal presentations.
  • Project lead for formal reviews of preliminary system design, schedules, data analysis, and release of final drawings.
  • Worked on a variety projects from San Jose Unified School District PV system design to Santa Clara Valley Water District.
  • Developed project schedules, did project management, wrote user manuals, messaging documents, system design documents.
  • Led the engineering team in the integration and gradual improvement of electrical system design of bio detector.
  • Correspond with Electrical, Software and Mechanical Design Engineers to develop integral test plans for system designs.
  • Prove electrical engineering system input to base of design and power and electrical system design philosophies.
  • Modified power system design on production mill for 50 KRPM spindle speed operation and world-wide power.
  • Developed analog, digital, RF, fiber-optics, video, robotics and power system designs.

Show More

18. Autocad

average Demand
Here's how Autocad is used in Senior Electrical Engineer jobs:
  • Utilized AutoCAD to design and document all electrical designs and modifications and mechanical changes made at the Delaware Reclamation Project.
  • Design aircraft wiring harnesses; provide AutoCAD wiring and harness drawings and on-site avionics installation engineering expertise.
  • Completed detailed AutoCAD drawings for electrical components of projects that included new facility design and facility upgrades.
  • Used AutoCAD to generate overall site interconnects, cabinet interconnects, and Interface Design Documentation.
  • Develop AutoCAD installation and interconnect diagrams and schematics.
  • Designed associated cabling and mechanical using AutoCAD.
  • Create electrical diagrams using AutoCAD Electrical.
  • Developed whole vehicle schematic using AutoCAD.
  • Designed power and lighting electrical systems, single line diagrams, panel schedules using AutoCAD 2002 and ESDA software package.
  • Assigned to DCN / EDCR Group working on System 43 Water Sampling System, developed DRA's in AutoCAD 2008.
  • Create electrical system designs using AUTOCAD 2010 LT, create specifications, proposals and estimates using McCormick Software.
  • Designed single line diagrams, panel schedules using AutoCAD 2006 and SE, electrical design software package.
  • Led drawing conversion project to convert 210 electrical machine drawings from an obsolete drawing application to AutoCAD.
  • Tasked with implementing all aspects of AutoCAD Electrical 2015 in the controls engineering department.
  • Used SKM, AutoCAD, MS Excel to develop construction documents for facilities.
  • Designed prototypes of parts, fixtures and enclosures in AutoCAD and SolidWorks.
  • Develop, modify and maintain AutoCAD One-line Diagrams throughout the entire process.
  • Develop schematics, harness fabrication drawings, and installation drawings using AutoCAD.
  • Create AutoCAD electrical plans and BOM to direct integration activities.
  • Used AutoCAD to design low and medium voltage power generation.

Show More

19. Alarm Systems

average Demand
Here's how Alarm Systems is used in Senior Electrical Engineer jobs:
  • Design Raceways, Fiber Optics Transceivers, documentation for field installation and upgrade of the Central & Secondary Alarm Systems.
  • Design and engineering of electrical power distribution, lighting And fire alarm systems.
  • Designed automatic Fire Alarm Systems for Commercial buildings, Hospitals and Schools.
  • Designed Fire Alarm Systems for LAUSD's high schools.
  • Alarm systems for the main cage, slot change booth and retail areas,.
  • Presented calculations for Fire Alarm Systems and revised specifications of all electrical equipment.
  • Generate electrical, power, distribution, lighting, fire alarm systems design for office and industrial enviroments
  • Installed new emergency communications system combined with fire alarm systems; saved company $300,000 by combining.
  • Designed uninterruptible power supplies for HVAC Controls and labs alarm systems.

Show More

20. KV

average Demand
Here's how KV is used in Senior Electrical Engineer jobs:
  • Complete renovation of existing kitchen and dining hall facility with modifications to existing 13.2kV underground primary.
  • Prepared design drawings for 13KV distribution including emergency generators, specifications and electrical calculations.
  • Prepared specifications for substation design/build subcontracts up to 500kV.
  • Performed electromagnetic design and prototyping of ignition coils (40kV) for industrial applications, as well as Aircraft Exciter design.
  • Involved with all aspects of electrical equipment design, specification, testing and commissioning from 132kV intake substations through to L.V.
  • Interfaced with the Southwest Power Pool and Sunflower Electric to discuss tapping a 115kV transmission line near dozens of wind turbines.
  • Designed (4.16kV-480V) medium and low voltage electrical power distribution systems for large, gas turbine power generation plants.
  • Replaced the existing 5MW, 26KV and 12KV hardware and aerial power distribution systems with an embedded power distribution system.
  • Coordinated with the power utilities for the design, and construction of two 8 mega Watts 12KV and 69KV feeders.
  • Project lead engineer for circuit breaker (4.8kV to 115kV) and circuit switcher (115kV) replacements for NYSEG.
  • Designed and coordinated project construction work for 44 KV substation expansion project at Chevron refinery in Salt Lake City.
  • Designed and managed the construction and/or relocation of five (5) miles of 69 KV transmission line.
  • Evaluated the under voltage set point calculation for the 4.16kV degraded voltage condition as required by Technical Specification.
  • Participated in the design of 25Kva DC to DC Converter, researched and specified radiation hardened components.
  • Experienced on developing specification of 232kV/132kV, 132kV/33kV and 33kV/11kV/0.44kV substations and thermal & Nuclear Power Plants.
  • Provided design services for PG&E's 60kV/115kV substation at the University of California in Davis.
  • Designed and managed installation of the sump pump system to keep 345kV and 13.8kV underground manholes dry.
  • Developed and implemented projects for the expansion and improvement of the 66KV/22KV Transmission and Distribution System.
  • Design distribution systems ranging in voltage from 13.2 KV to 34.5KV for residential and commercial customers.
  • Designed, developed, formulated, promoted, and installed 304 self-embedded 138kV overhead structures.

Show More

21. Ethernet

average Demand
Here's how Ethernet is used in Senior Electrical Engineer jobs:
  • Experience with MIL-STD-1553 Data Bus, J1939 CAN, High speed Ethernet, radio communications, and power routing schemes.
  • Designed, developed and integrated an Ethernet Network and Control Area Network (CAN) into a military vehicle.
  • Worked on trouble shooting network issues of devices via Wire shark by analyzing Ethernet packets and system logs.
  • Designed, programmed and commissioned in-line batch-scale lines using Ethernet I/P generic modules to communicate with scale controllers.
  • Reduced the cost to 65% of the first generation while adding Device Net and Ethernet interfaces.
  • Designed an accessory board to add Ethernet and LCD driver to an OMAP3230 based processor board.
  • Designed and implemented a plan to convert existing door controllers to Ethernet using custom communications cards.
  • Designed Gigabit Ethernet Line card for high-speed data exchange between digital controller and host PC.
  • Used COTS product to take NO/NC contact closure signals and convert them to Ethernet.
  • Conducted extensive Ethernet, IP, and TCP level testing using network test equipment.
  • Design, procure, program and manage Ethernet Communication Systems to control various processes.
  • Pushed code down to client SBC via SSH/TFTP protocols over Ethernet and RS232.
  • Design of Microprocessor controlled VME system boards for Magnetic Tape and Ethernet interfaces.
  • Network systems from token ring to fiber based high speed Ethernet,.
  • Networked each puzzle and utilized Power over Ethernet (PoE) to
  • Integrate existing manufacturing operations into a plant-wide network (Ethernet).
  • Developed high-speed Ethernet switching, embedded systems and line cards.
  • High-speed Ethernet transceivers including: 10Gb SFP+, 40Gb QSFP, and 100Gb CFP.
  • Estabilished different network communications / protocols, such as MODBUS TCP and Ethernet/IP.
  • Network setup (Ethernet, DH+, DeviceNet, Modbus, BacNet, LonWorks, CAN).

Show More

22. UL

average Demand
Here's how UL is used in Senior Electrical Engineer jobs:
  • Developed plant-wide refinery electrical distribution engineering software model for client that became powerful tool that client used to conduct various analyses.
  • Developed electrical schematics and wire numbering system for multiplex system to ensure efficient harness manufacturing, system installation and vehicle troubleshooting.
  • Participated in working groups with the customer to identify aircraft faults and troubleshooting procedures to simulate for maintenance personnel.
  • Qualified and troubleshot Flight Actuation Controllers utilizing TMS320 Digital Signal Processors with Texas Instruments Code Composer Studios Emulation program.
  • Supervised and provided electrical inspection services during the construction of a 168-MW bulb turbine hydroelectric generating station.
  • Consulted with other leading metalworking manufacturers to improve equipment and technological processes and programs for CNC equipment.
  • Conducted feasibility study on hydraulic systems in heavy equipment to identify increase in fuel and power efficiency.
  • Developed various simulation test benches with behavioral models to confirm proper operation of each transmitter block section.
  • Provided recommendations and replacements of obsolete components resulting in reduced redesigns, improved efficiency and cost.
  • Prepared proposals, supervised electricians, coordinated schedules, verified installation and processed invoices for projects.
  • Reviewed revamped and modified test procedures for production testing of associated modules and systems FAA requirements.
  • Ensured module met the required specifications as per Customer procurement specifications and the Design Requirements Document.
  • Proposed and successfully used a hardware-only approach to overcome problems with previous micro-controller based systems.
  • Validate small product/subsystem performance from technical design through analysis, simulation, and laboratory testing.
  • Reviewed & analyzed engineering qualification test results and prepared & released engineering qualification test reports.
  • Proposed additional requirements as a result of testing and analysis to improve safety margins.
  • Led development of analog relay control circuits and programming of digital multiplexing control modules.
  • Reviewed designs, oversaw preparations of drawing, design calculations, and budgeting/scheduling reports.
  • Coordinate with sub-contractors, sub-consultants and specialists to collect information related to commissioning.
  • Developed behavioral simulation models for piezoelectric transducers, gear pumps, and oscillators.

Show More

23. Arc Flash

average Demand
Here's how Arc Flash is used in Senior Electrical Engineer jobs:
  • Perform electrical studies such as short circuit, arc flash, cable sizing, lightning protection, and load analysis.
  • Developed studies for Fault Level, Grounding, Lightning, Bus-work, Arc Flash, AC/DC, Battery/Charger sizing etc.
  • Project Engineer for an Arc Flash study for Mid-American Energy at their Port Neal Stations in Sioux City, IA.
  • Worked on short circuit, protective coordination, and arc flash studies for Archer Daniels Midland (ADM) plants.
  • Performed short circuit analysis, protection device coordination, arc flash studies and motor starting analysis for Ethanol plants.
  • Provide working level support as the Arc Flash Hazard Analysis program subject matter expert and electrical safety trainer.
  • Provide consultation on services for power systems studies including Arc Flash study solutions using SKM power tools.
  • Performed arc flash analysis, short-circuit analysis, and power factor analysis using SKM Power Tools.
  • Participated in ARC Flash studies to ensure that companies were in IEEE 1584 and NFPA
  • Prepared arc flash boundary limit warning labels and PPE requirements for the existing plants.
  • Performed Electrical Hazard Analysis for Arc Flash in compliance with IEEE standards.
  • Created SKM Models for DC systems and performed DC Arc Flash Analysis.
  • Performed an arc flash analysis for the entire plant and warehouse.
  • Conducted extensive Arc Flash Study for Industrial Power Distribution System.
  • Developed procedures and mitigation designs to reduce Arc Flash Hazards.
  • Perform DC Arc Flash studies and incorporate into policies.
  • Performed short circuit and arc flash studies.
  • Performed annual Arc Flash Hazard analysis.
  • Perform Arc flash studies for utilities.
  • Switch and Data, DBT and Capital One - Short circuit and arc flash studies.

Show More

24. R

average Demand
Here's how R is used in Senior Electrical Engineer jobs:
  • Developed electrical/instrumentation Preventative Maintenance instructions.
  • Designed an additional hardware-based test fixture to measure contact resistance and open resistance of infusion pump keypad membrane switches.
  • Designed and operated vibration platform for evaluation of effects of aircraft vibration on precision timing systems.
  • Reviewed work of engineering staff and contractors to ensure accuracy and adherence to accepted engineering practices.
  • Elicited requirements to develop a test fixture for magnetically encoded labels used on syringe infusion pumps.
  • Interfaced directly to the printed circuit board manufacturer and contract manufacturer for board fabrication and assembly.
  • Authored numerous Acceptance Test Procedures and Functional Test Procedures used by production test technicians.
  • Spearheaded the development of design procedures incorporating design requirements and design specification documents.
  • Performed detailed numerical analyses on components and structures to determine levels of safety.
  • Finalized the substation arrangements, protection and control requirements and equipment requirements.
  • Power distribution projects required close co-ordination with architects and local utility companies.
  • Supported Utilities Group at Maryland Aviation Administration for Baltimore Washington International Airport.
  • Performed innovative structural repairs on 100-year-old adobe homestead and other historic buildings.
  • Conduct inspection of all ongoing works related to electrical service installations.
  • Design analog amplifiers used in vibration monitoring transducers and vibrant switches.
  • Developed microprocessor-based electronic bagpipe now in testing for band instruction worldwide.
  • Involved in break down electrical and mechanical maintenance and preventive maintenance.
  • Worked in manufacturing environment to troubleshoot problems and make design improvements.
  • Major contributor to implementing FDA/QSR-compliant design environment in previous non-medical company.
  • Developed and maintained a software change control database application in Microsoft Access

Show More

25. NEC

average Demand
Here's how NEC is used in Senior Electrical Engineer jobs:
  • Experienced with the integration and interconnection of renewable solar micro-grid energy generation into existing utilities HV and EHV utility transmission/distribution substations.
  • Utilized NEC code experience in design of electrical systems and coordinating with electrical inspectors for fast track projects requiring engineering expertise.
  • Performed range of analyses including electrical interconnect and power consumption analyses, which guided design decisions and prevented integration issues.
  • Supervised the review of engineering documentation or compliance program where the professional engineer; seal electrical work as necessary.
  • Prepared and approved City Ordinance Rule 21 for Privately owned Solar Energy connectivity requirements with city owned Electrical system.
  • Review detailed electrical engineering design for new upgrades or expansion and perform some design functions as necessary.
  • Debugged X-ray transmission detector with mechanical engineer to determine where mechanical tolerances were affecting electrical connector interfaces.
  • Generated requirements and proof-of-concept demonstration platform to add additional features such as wireless BTLE connectivity to product.
  • Designed in new requirements, and incorporated necessary functionality of obsolete circuit card onto the module.
  • Prepare single-line drawings, schematics, specifications, and develop equipment functional descriptions as necessary.
  • Research automation parts and coordinated with Purchasing for ordering all necessary electrical and controls equipment.
  • Created all the necessary documentations from Engineering Performance Specifications to hardware validation protocols.
  • Provide electrical system integration interfacing and interconnect for products manufactured by ASM.
  • Provide design sketches for electrical and instrument installation details when necessary.
  • Develop connector pins Input/output documentation to facilitate coordination of PDU cabling.
  • Work included engineering, design and interconnecting to existing electrical systems.
  • Implemented plant systems upgrades necessary to meet new operational requirements.
  • Designed schematics and connection diagrams for nuclear plant security projects.
  • Completed install of Cat6 cabling and individually terminated Ethernet connectors.
  • Developed Signal Interconnect Matrix for routing video and analog signals.

Show More

26. EMI

average Demand
Here's how EMI is used in Senior Electrical Engineer jobs:
  • Implemented design upgrades and impact analysis of EMI and EMF emissions on various telecommunications and signaling peripherals.
  • Designed electrical/electronic circuits and control systems for the Advanced Vertical Processing Furnaces used in the semiconductor industry.
  • Supervised Technicians and Engineers to upgrade and maintain chemical production and photographic paper coating and converting.
  • Provided designs and developed embedded controllers used in Chemical Vapor Deposition (CVD) capital equipment.
  • Drafted specifications and tested electrical components to meet the latest in emission and maintenance regulations.
  • Designed and integrated servo and control systems into robotic handlers used by the Semiconductor industry.
  • Participated in signal integrity analysis using simulation tools from Mentor Graphics for EMI noise reduction.
  • Developed new design curves and integrated semi-automatic thick film resistor sizing and placement in Auto-Cad.
  • Lead Electrical Engineer for a major electrical equipment upgrade project at a petrochemical facility.
  • Performed testing and conducted experiments to reduce the conducted emissions of new electricity meters.
  • Provide hands on engineering assistance to manufacturing, engineering labs and Environmental/EMI qualification lab.
  • Performed system EMI testing and analysis; environmental qualification reporting, testing and analysis.
  • Design for minimized EMI radiation and susceptibility while maintaining high frequency video signal integrity.
  • Carried out fugitive emission studies and developed area classification schedule and layout drawings.
  • Conducted many initial calibrations with chemicals and tested 40 newborns screening successfully.
  • Specified facility requirements to support the manufacturing of leading edge semiconductor systems.
  • Designed and developed application-specific sensors to determine the consistency of chemical elements.
  • Shepherded multiple machines through regulatory certification, including Safety and EMI standards.
  • Designed a system which passed EMI compatibility tests at Underwriters Laboratory.
  • Delivered many new Chemical Vapor Deposition and Nanotechnology tools to market.

Show More

27. HMI

average Demand
Here's how HMI is used in Senior Electrical Engineer jobs:
  • Provide factory automation solutions utilizing ALLEN-BRADLEY CONTROL LOGIX, CONPACT LOGIX PLC control platforms with PANELVIEW and PROFACE HMI's.
  • Replaced obsolete human machine interface (HMI) with a custom designed HMI to exactly replicate obsolete HMI.
  • Provided power / control AC / DC drives using mini computers, Programmable Logic Controllers and HMI.
  • Designed the first automation package integrating a HMI as part of operator controls.
  • Designed embedded touch-screen controls (HMI) for large-scale wet/dry testing facility.
  • Generated application programs and HMI screens for customers using Visual Designer.
  • Perform communication and HMI testing on Relay panel line ups.
  • Developed standard control logic and HMI applications.
  • Programmed, configuration of HMI's.
  • Key Results:* Wrote bootloader, embedded firmware and HMI from ground up for Microchip PIC based I/O board.
  • Design Logix 5000 PLC and Factory Talk HMI control systems for industrial coffee roasters and material handling systems.
  • Design AB Logix 5000 PLC and Factory Talk HMI control systems for steel wire rolling mills.
  • Provided HMI development on PanelView Plus (Factorytalk), Siemens WinCC-Flexible, and others.
  • Developed PLC, remote communication and HMI for Chlorine di-oxide generator used in hospitals.
  • Trained maintence personal on PLC, HMI, Drives, troubleshooting and programming
  • Added special information screens on HMIs per customer's request.
  • Train customers' technicians and machine operators with Telemecanique PLC, Magelis HMI and Monitor Pro (Factory Link) systems.
  • Designed, Developed and Implemented dozens of RSView ME and RSView SE HMI Applications for many consumer products industry customers.
  • Developed large PLC program (RSlogix 5000) and HMI for Universal Studios Hollywood ride The Mummy.
  • Developed HMI screens using Intellution & Wonderware software.

Show More

28. MCC

average Demand
Here's how MCC is used in Senior Electrical Engineer jobs:
  • Experienced in variable speed drive, motor starter, MCC, transformer, UPS, and substation operation and installation.
  • Witnessed FAT (Factory Acceptance Test) for MCC and PLC panel at contractor's fabrication plant.
  • Designed modular MCC (motor control center) and control buildings for the offshore oil rigs platforms.
  • Designed the 4160V and 480V electrical equipment to be housed in the building and replace existing MCC.
  • Coordinated client's requirements for lighting, grounding, power and MCC design.
  • Load list development and MCC population based on P&ID's.
  • Developed electrical key 1-line diagrams and LV 460V MCC one line diagrams.
  • Provided MCC loading, EDG loading and numerous other electrical calculations.
  • Prepared One Line Diagrams (MCC) for the truck tipper system for the cement plant.
  • Field Engineer working with MCC, Motors, Cables, Raceway, Grounding & Client Issues.
  • Prepared One Line Diagrams (MCC) for the Leachate Treatment Plants.

Show More

29. PCS

average Demand
Here's how PCS is used in Senior Electrical Engineer jobs:
  • Defined the complete radio architecture for the next generation PCS/Cellular CDMA 3-V portable handsets.
  • Maintained safe liaison with representatives of PCs manufacturers and FAA government officials.
  • Work on advanced satellite communication systems, terrestrial fixed and mobile systems (cellular and PCS), multipoint distribution systems.
  • Re-designed and transitioned to production a 100W PCS band power combiner in Taconic's RF35 material.
  • Worked on an CDMA mod/demod project called Odyssey for global PCS satellite communications.
  • Designed GaAs MMICs for Cellular/PCS portable subscriber products.

Show More

30. I/O

low Demand
Here's how I/O is used in Senior Electrical Engineer jobs:
  • Performed verification/validation of software block diagram, master device, and I/O database for waste removal and replacement evaporator DCS system.
  • Developed SMEMA machine interface with integrated 3ph BLDC motor controller, CPLD state machine, and serial I/O channel.
  • Design of Hardware, I/O list for the Control System for new facilities, based on control philosophy.
  • Developed CMOS I/O macros and a High Speed LVDS I/O Driver/Receiver pair used for 150nm custom/ASIC VLSI microchips.
  • Develop Power Drawings, I/O Drawings and programming for power equipment and MCC's with Ethernet control systems.
  • Prepared PLC I/O listing and for control equipment and instrumentation, electronic flow measurement and communications.
  • Included clock distribution systems, bus arbiters, DMA engines, and serial I/O blocks.
  • Prepared specification sheets, I/O lists, cable and conduit schedules and purchase requisitions.
  • Design of SQ-RAID I/O processor board including high-speed interface to mass storage system.
  • Designed the DCS I/O list from P&ID drawings for entire facility.
  • Designed and Programmed PIC Micro-Controller based board for 48 I/O Interface.
  • Designed and modified cables to test I/O Module for MFD-268C4A program.
  • Defined and developed I/O interfaces to the Point of Sales terminals.
  • Designed electronic circuits for I/O modules from concept to finished product.
  • Tested the multiplex automatic I/O control system on the bus.
  • Allocate control functions and I/O quantities to hardware implementation.
  • Designed X86 based CPU and I/O interface boards.
  • Update safety I/O system for X-ray scanner.
  • Design and site supervision of PLC I/O lists, loop drawings, panel layout, & JB layout.
  • Charged with system control, integration and automation -- from AD/DC distribution box to analog/digital I/O modules and electromechanical sub-assemblies.

Show More

31. EMC

low Demand
Here's how EMC is used in Senior Electrical Engineer jobs:
  • Developed and implemented Power Quality Monitoring system by using portable Power Quality Analyzer- AEMC Power Pad 3950.
  • Experienced in electrical design concepts for EMC/EMI worldwide certification.
  • Team leader for Compliance Testing for both Emissions and Susceptibility (EMI/EMC) and IEC60601 of the LTV the Series Ventilator.
  • Key technical resource for product design and development team responsible for EMC compliance of a low cost IR Ambient Air Analyzer.
  • Experienced in design practices to gain EMC regulatory certification (FCC & CISPR familiarity) within a low cost design.
  • Worked with outside testing agency to get the Alba system to comply with EMC and safety regulations, IEC 60601-1.
  • Maintained good working relationship with Underwriter's Laboratory engineers, and provided design support during UL and EMI/EMC testing.
  • Conducted P-Spice simulations for Remote Power Controller to ensure no interruptions when exposed to voltage transients and EMC abnormalities.
  • Obtained and maintained CE Mark (EMC/EMI and Low Voltage Directive) on all of Abbott Diagnostic Instruments.
  • Write and execute EMC/EMI and Safety test plans to support local site product compliance testing including instrument troubleshooting.
  • Designed and qualified RF systems for electrical, mechanical and EMC requirements for Mil-Spec and European CE mark.
  • Conduct the lab study on patient leakage current, isolation, electrostatic discharge, and EMI/EMC test.
  • Provided oversight in EMC / EMI / FCC / UL Design and Certification testing.
  • Trained Abbott Lab's personnel on the use of EMC/EMI equipment and standards.
  • Modified switching power supply circuits to enable passing RF Sensitivity and EMC tests.
  • Coordinated and conducted temperature, vibration, shock and EMC testing of products.
  • Worked with independent test lab to coordinate testing to EMC and safety standards.
  • Functioned as the in-house expert for European CE Mark safety and EMC requirements.
  • Designed PMS/EMCS and DCS signals which ran through redundant fiber optic network.
  • Analyzed EMC and noise considerations for long cable runs (+100ft).

Show More

32. Circuit Design

low Demand
Here's how Circuit Design is used in Senior Electrical Engineer jobs:
  • Performed transistor level circuit design simulation, characterization, optimization, and verification.
  • Analyzed customer requirements and provided internal specifications to the modular circuit design group.
  • Circuit design, testing, verification and characterization of new and existing products
  • Commenced circuit design/schematic capture in conjunction with pricing and availability of parts.
  • Designed high-speed Digital, LVDS, Switching Power Supplies, Hardware Software Integration, Analog circuit designs and Customer Interface Cables.
  • Circuit design and analysis of an accurate low noise measurement circuit utilizing 16 bit analog to digital converters and amplifiers.
  • Perform circuit design and analysis, reliability analysis (MIL HDBK-217F), and failure mode analysis for motor controls.
  • Performed analog and digital circuit design, software design, sustaining engineering, and component engineering.
  • Circuit design of RF hardware, analog and power supply circuits for the aerospace industry.
  • Completed circuit design (68332 and DSP based circuitry) and qualification tests on time.
  • Provided new circuit designs for existing products which reduced cost or extended product lifetime.
  • Created analog, digital and mix signal circuit designs for GPS/COMPASS and RADAR application.
  • Performed analog and digital circuit design, sustaining engineering, and test equipment design.
  • Power supply and charging circuit design with power isolation for fire hazard.
  • Field support, root cause analysis, critical circuit design analysis.
  • Circuit design, Power Supply design and implementation.
  • Circuit design and schematic capture experience.
  • Circuit design for video waveform monitors Discrete analog video and trigger circuitry
  • Perform Circuit Design analysis (bottom-up hierarchy), create standard cell libraries, cell search, characterization, netlist extraction.
  • Circuit design for AC & DC motor speed controls, variable-speed switches, low-voltage power supplies, and microcontroller circuits.

Show More

33. Orcad

low Demand
Here's how Orcad is used in Senior Electrical Engineer jobs:
  • Co-developed and produced Generic OpenBus and Differential Buffer interfaces using OrCAD design tools.
  • Captured and cleaned schematics using OrCAD.
  • Implemented embedded application using Dynamic C with Rabbit controllers, along with laying out circuit boards using OrCAD tools.
  • Used OrCAD Capture and Linear Technology Switcher CAD simulation software, and MathCAD to plan design of project.
  • Designed analog, digital circuits in OrCAD for component monitoring and reporting in a rack mount server.
  • Designed test benches and simulations of OrCAD schematics and circuit ideas for updating IC components.

Show More

34. Load Flow

low Demand
Here's how Load Flow is used in Senior Electrical Engineer jobs:
  • Developed calculation procedure to quickly analyze the electrical load flow of multiple pumping scenarios.
  • Performed preliminary load flow and voltage drop calculations.
  • Completed load flow, motor starting, short circuit and relay coordination studies using SKM Power Tools software.
  • Revised Station Load Flow, Voltage Drop, Short Circuit and DC Battery Calculations.
  • Performed load flow, short circuit, protective relay coordination and arc flash studies.
  • Perform load flow, voltage drop, short circuit, and protection coordination studies.
  • Performed Var/Voltage control calculations on solar PV plant projects using SKM load flow analysis.
  • Performed load flow, short circuit, motor starting, and transient stability study.
  • Performed system load flow studies, fault studies, and relay coordination studies.
  • Performed fault analysis and load flow analysis using CAPTOR/DAPPER software.
  • Used SKM software for load flow studies
  • Power Loft, VA: Load Flow Study-SKM software.
  • Performed short circuit/load flow/voltage drop calculations and overcurrent device coordination.
  • Develop single drawing utilizing SKM software Run Arc flash studies and load flow studies utilizing SKM and ARC Pro software.
  • Prepared calculation such as Arc Flash Analysis, short circuit, load flow and Overcurrent Protective device coordination.

Show More

35. Labview

low Demand
Here's how Labview is used in Senior Electrical Engineer jobs:
  • Design of multiple LabVIEW test programs enabling volume manufacturing of Military products.
  • Developed HPVEE and LabVIEW program for radiated and conducted receive sensitivity measurements.
  • Programmed LabVIEW data acquisition system for testing and design evaluation.
  • Developed data acquisition and control system with LabView.
  • Develop LabVIEW applications for determining system performance parameters.
  • Developed LabVIEW program to monitor and collect temperature, current and voltage of power supplies used in capital equipment.
  • Developed LabView(TM) based software, which acquired direct digital images, parallel and Camera Link.
  • Created various GUI panels in LabVIEW and Maple Systems for all testing programs for the Underground Test Division.
  • Assembled data acquisition system, test fixtures, and developed LabVIEW based data acquisition software for investigative studies.
  • Developed LabView software for Engineering development, Production functional test, and Proof of Concept technology product.
  • Used LabVIEW to automate a switch dust test fixture which operates four switches with linear actuator motors.
  • Designed PC based Test equipment using National Instruments DAQ cards & Drivers to interface with LabVIEW.
  • Updated factory floor LabView software applications and trained in advanced LabView and Test Stand architectures.
  • Modified LabVIEW Intermediate Level TPS for F110-GE-100,129 aircraft engines per Technical Order (T.O.)
  • Developed automated test equipment that used LabView to perform board level and system testing.
  • Developed an embedded application to automate the system using LabVIEW RT (VxWorks).
  • Designed two automated test systems, using LabVIEW, replacing old manual systems.
  • Programmed LabVIEW test software to perform hardware initialization, interface, and control.
  • Supported manufacturing validation of processes and software (LabVIEW based) test programs.
  • Perform test development for ESS testing using LabView 9.1 / TestStand 4.5.

Show More

36. Design Reviews

low Demand
Here's how Design Reviews is used in Senior Electrical Engineer jobs:
  • Performed detailed design, including schematic capture, customer design reviews/presentations, power analysis, layout constraints.
  • Participated in several design reviews with the customer and assisted with design improvements.
  • Participate in preliminary and critical design reviews with military customers.
  • Performed electrical design reviews with project owners and other departments.
  • Project Management functions: organized preliminary and critical design reviews.
  • Prepared comprehensive presentations for project design reviews and conference proceedings.
  • Presented preliminary and critical design reviews of product.
  • Attended supplier preliminary and critical design reviews.
  • Provided technical leadership in design reviews.
  • Participated in detailed design reviews, performed system acceptance testing and trained customers in the use of satellite tracking ground stations.
  • Provide technical expertise with solutions to project planning, provide technical reports and design reviews for CONUS and OCONUS projects.
  • Followed USACE delivery process and includes MCACES M-II cost estimating, SpecsIntact, and design reviews using DrChecks.
  • Participated in circuit design reviews and discussions with American and German counterparts and in meetings with the Customer.
  • Manage both external, internal customers, electrical project team and support design reviews for electrical systems
  • Documented and held design reviews for complex schematics, cable drawings, and printed circuit boards.
  • Conducted demonstrations, design reviews and technical presentations to US Navy/US Army/US Air Force and management.
  • Support design reviews and troubleshooting efforts on any product that requires new or updated power supplies.
  • Interacted with customers to ensure product acceptance and participated in design reviews with client's staff.
  • Participated in design reviews for a new critical care ventilator and Ireland P-B ECO Board.
  • Support technical design reviews with suppliers and global engineering design teams to meet program milestones.

Show More

37. Vhdl

low Demand
Here's how Vhdl is used in Senior Electrical Engineer jobs:
  • Worked video algorithm developments and VHDL conversions
  • Constructed VHDL code to control Pulse detector, integrator and A/D converter circuit used in PET/SPECT Imaging System.
  • Tested the design with VHDL test vectors / benches, and with application software in the lab.
  • Designed both VHDL and C based firmware for the board as well as serial communication protocol.
  • Ported over existing VHDL test bench to an UVM environment and instructed the design/test leads.
  • Utilized Lattice Diamond software to design and implement in VHDL a CPLD for feedback control.
  • Implemented the design with State Machine/VHDL code; Built and debugged the system.
  • Implemented the design with State Machine/VHDL code; Simulated & synthesized the design
  • Designed and built fuel control system for power generator turbine using CPLD/VHDL.
  • Developed the VHDL firmware to support both XAUI and Aurora transmission protocols.
  • Worked with Software engineering team to create VHDL code specifications.
  • Supervised CPLD VHDL programming for use in modulator scheme.
  • Redesigned existing graphical LATTICE design into VHDL design.
  • Designed custom VHDL IP interfacing to PPC architecture.
  • Performed VHDL coding using State Machine methodology.
  • Developed a highly customizable VHDL program to generate the acceleration/deceleration profile for stepper motors.
  • Designed a hot water supply system controller for commercial airplanes Implemented the design with State Machine/VHDL code.
  • Assigned multiple VHDL / Verilog Firmware designs with ModelSim simulation and code verification.
  • Developed Forth language and VHDL software for GE-Lentronics network card applications.
  • Imported Microblaze into ISE environment project with other VHDL code.

Show More

38. Etap

low Demand
Here's how Etap is used in Senior Electrical Engineer jobs:
  • Provide engineering calculation analyses using ETAP software to model emergency DC battery back-up system performance.
  • Developed ETAP model of proposed electrical system.
  • Completed studies using ETAP models for 35KV, 4160KV, 2.4KV, 480V power systems to improve the electrical reliability network.
  • Used ETAP software to perform detailed system modeling, fault studies, and relay time coordination studies for the redesigned substation.
  • Perform engineering calculations for short circuit and load-flow studies, load analysis, cable sizing & etc using ETAP software programs.
  • Performed electrical Fault, Transient Stability, Load Flow Study using ETAP, cable tray sizing and breaker interlock philosophy.
  • Performed Power System Studies (Load Analysis, Load Flow, Motor Starting and Short Circuit Study) using ETAP.
  • Create ETAP library components for LV breaker and LV trip units to perform LV breaker Co-ordination Study.
  • Used ETAP to perform short circuit, load flow, arc flash and motor starting studies.
  • Conduct Load flow study and Short circuits analysis by using ETAP in accordance with IEEE Std.
  • Perform and Check Load flow, Short circuit and Motor Starting Studies in ETAP Software.
  • Prepare, check & review for Under Ground cable pulling calculations by using ETAP software.
  • Executed Electrical system studies, generated relay co-ordination curves and relay settings by using ETAP.
  • Induced fan wash pump skid upgrades along with ETAP calculations for board loading and coordination.
  • Used ETAP to analyze Electric Power Systems on Offshore Platforms for EOG and PEMEX.
  • Performed engineering calculations and system modeling using ETAP under the direction of SDE.
  • Performed load flow, short circuit and breakers setting calculations using ETAP software.
  • Utilized ETAP computer programs to obtain voltage drops and short circuit currents.
  • Provided calculations by using ETAP according to the Con Ed's procedures.
  • Modeled Synchronous machine's Exciter, Governor and PSS system in ETAP.

Show More

39. USB

low Demand
Here's how USB is used in Senior Electrical Engineer jobs:
  • Achieved low power consumption by reducing USB2.0 suspend current to 230uA, less than half of 500uA USB-IF specification limit.
  • Designed USB, RS485, RS232, and bit bang DUART control interfaces for SH7727 based fire suppression control panel.
  • Design Medical Equipment systems for the Dental Industry Digital Imaging that consists of sensors and USB host interfaces.
  • Designed a distributed network of digital signal processors controlled by a PC via a USB controller and hub.
  • Designed an isolated USB hub so that the medical ventilator can use any commercial USB devices, e.g.
  • Updated the existing USB test equipment and procedure to achieve successful USB Compliance testing on two security modules.
  • Specify hardware for robust external communications based on USB, HDMI, and RS422 protocols among others.
  • Designed using a multiprocessor architecture interconnected by USB, USB2, or Fire Wire to host PC.
  • Design USB 2.0 port power controller/data pass through for external, customer access USB ports.
  • Created LabView automated test software via IEEE/GPIB and Motorola's USB TMCD test protocol.
  • Designed USB card reader for proprietary memory pack, based on Cypress's EZ-USB.
  • Designed USB Interface PCBA for controlling the ULAS Hardware Validation Project test fixture.
  • Crafted all firmware and hardware, including host USB driver development.
  • Developed system to utilize SD card flash storage and USB communications.
  • Consulted on other projects to facilitate development of their USB subsections.
  • Test automation designs, power cycling, USB eye diagram evaluation.
  • Designed a MSP430 & USB/serial based programming device for factory production.
  • Solved the persistent ESD and USB failures in one week.
  • Added USB2.0 High/Full speed interface with device and host control.
  • Served as mentor for other engineers learning USB.

Show More

40. Test Cases

low Demand
Here's how Test Cases is used in Senior Electrical Engineer jobs:
  • Developed test plans, matrices, and test cases/procedures using requirements and/or design documentation.
  • Created interface document and Use Test Cases and other documents required by the company's design control process.
  • Created test cases that cover requirements, structure coverage and provided capability to debug design issue.
  • Design and perform test cases using Smart-Ware QA (Quality Assurance) Software tools.
  • Worked as test engineer to develop and perform test cases for customer review.
  • Participate in peer reviews for manual and automated test cases.

Show More

41. DSP

low Demand
Here's how DSP is used in Senior Electrical Engineer jobs:
  • Modified architecture inside Platform Studio environment against Spartan 3A1800DSP development board.
  • Worked with R&D to develop test capabilities for the DSP-based radio link boards in the next-generation implantable device programmer.
  • Developed software implementing speech algorithms using the AT&T DSP32C digital signal processor for real time speech processing.
  • Developed quadrature signal generator to test the radar using a DSP and wrote the DSP algorithms for the generator.
  • Analyzed and document CS5377 DSP from a legacy product to help interface it properly with the next generation design.
  • Mapped computer-generated video frames received over fiber into pixel streams with a C50 DSP and C code.
  • Designed (Level A) Proximity Sensor Interface circuit for entire Legacy 450-500 Aircraft with TMS320F2808 DSP.
  • Solved problems requiring expensive DSP rework that often occurred when In-System-Programming (ISP) was done.
  • Used PIC DSP for sensor interface and established communication to main system Controller for housekeeping purposes.
  • Designed the digital section of the 320C52 DSP based PROD IV stand-alone wireless subscriber system.
  • Designed 6U Dual DSP (Texas Instruments TMS320C6701) boards for ComSpace's Repeater Station.
  • Implemented IIR Second Order System DSP filters using vendor IP and Multiply/accumulate state machines.
  • Programmed TI TMS series DSP for Electrode Power Systems (EPS) Controller unit.
  • Designed, planned, developed and implemented real-time systems using TI 6701 DSP EVM.
  • Develop Micro controller/DSP (Fixed/Floating point) firmware in C and Assembly language.
  • Lead Engineer for the design and development of DSP based hearing aid devices.
  • Designed the network MPEG-4 video decoder using PowerPC RISC CPU and Equator DSP.
  • Programmed embedded C25 DSP in assembly to process audio, digital filters.
  • Developed embedded C firmware for battery powered DSP/ARM based medical devices.
  • Worked on Fault Management requirements against the DSP hardware.

Show More

42. Hvac

low Demand
Here's how Hvac is used in Senior Electrical Engineer jobs:
  • Proposed resource/energy conservation projects for HVAC, lighting, process heating, boilers, chillers, steam and air compressor systems.
  • Achieved Efficiency Vermont's 2005 highest award for innovations in lighting controls, HVAC, telecommunications and construction administration practices.
  • Project Manager and embedded hardware designer of a custom HVAC climate control and power distribution system for civil aviation.
  • Solved & troubleshot electrical issues at the site, supervised distributed control system HVAC & utilities for plant operation.
  • Plan and facilitate projects for maintenance and repair of electrical & HVAC systems, especially high power distribution equipment.
  • Integrated emergency shut down to the HVAC and air handler systems, PA and autonomous systems.
  • Design of power circuits for HVAC and Unit Ventilators.
  • Designed embedded controllers for large HVAC applications.
  • Engineered and designed HVAC systems.
  • Perform HVAC analysis, power utilities analysis for installation.
  • Experience includes de-sign of fire detection and suppression system, Electrical Lighting, Data communications system, and HVAC control system.
  • Design control packages to operate Facility Utilities such as curing pump room, PH water system, HVAC etc.
  • Developed electrical power sub-system for new tractor trailer HVAC (heating, ventilation, and airconditioning) unit.
  • Upgrade of C Wing: In this projects, major HVAC equipment is being replaced /renovated.
  • Proposed a new platform of HVAC controllers with multiple communication interfaces.

Show More

43. Cost Estimates

low Demand
Here's how Cost Estimates is used in Senior Electrical Engineer jobs:
  • Project cost estimates were developed early in the process and monitored throughout design development and construction documentation phases.
  • Prepare cost estimates and concept drawings for Military technical representatives for negotiation and administration of contracts.
  • Developed electrical bills of material and capital cost estimates.
  • Provided detail capital project cost estimates.
  • Performed cost estimates to generate proposal.
  • Submitted required system improvements and prepared cost estimates and schedules for Annual Work Program (transmission, substation and distribution).
  • Provide government cost estimates and assist the contracting officer in defining scopes of work.
  • Analyze customer specifications, select appropriate equipment, design circuits and make cost estimates.
  • Define scope of project, development cost estimates and product cost test estimates.
  • Assist Sales and Service with electrical and controls solutions and cost estimates.
  • Provided cost estimates in a proposal effort for the MFTA Winch.
  • Produced cost estimates for potential client construction projects using WinEst.
  • Prepared reports, plans, specifications, and cost estimates.
  • Prepared and monitored cost estimates, budgets and work schedules.
  • Prepare project cost estimates and value engineering proposals.
  • Prepared the material take-offs for cost estimates.
  • Completed cost estimates and proposal for projects.
  • Perform field surveys and cost estimates.
  • Generated cost estimates for ITB projects.
  • Prepared cost estimates for budgeting.

Show More

44. Ieee

low Demand
Here's how Ieee is used in Senior Electrical Engineer jobs:
  • Follow all IEEE Standards for engineering, NRC Regulation Guides, Project Procedures, and directives.
  • Test software and test fixtures using GPIB and IEEE 488 instruments and PC based data acquisition.
  • Test software (which controlled IEEE488 instruments and proprietary hardware) was a BASIC like language.
  • Designed and integrated software/hardware for repair of hardware (circuit boards)IEEE instrumentation.
  • Reviewed electrical engineering packages to comply with ANSI, IEEE and NFPA 70 codes.
  • Specified Environment Qualification for electrical equipment per IEEE, 10CFR50 and SRP3.11.
  • Participated in IEEE STD EQ working group and EQ subcommittee.
  • Prepared battery specification per IEEE 484 and 485 requirements.
  • Compiled design requirements according to IEEE and 10CFR50.
  • Prepared a VT/CT burden calculation per IEEE C57.13.
  • Work with ANSI, IEEE, OSHA and IEC standards, and supervise unit test.
  • Designed and tested parameterized double and single precision IEEE 754 floating point adder, multiplier, and multiplier accumulator.
  • Designed ATE utilizing IEEE-488 based instruments, coded test applications using HP BASIC.
  • up to IEEE 802.3 and ANSI/TIA/EIA specification.
  • Completed IEEE Radar Technology for the New Millennium and Introduction to Radar , and C++ Programming (UMass equivalent) courses.

Show More

45. Failure Analysis

low Demand
Here's how Failure Analysis is used in Senior Electrical Engineer jobs:
  • Produced Failure Analysis Reports, also participated in data analysis, root cause analysis and corrective actions.
  • Improved failure analysis capabilities of existing engineering diagnostic software by adding test features using C/C++.
  • Reviewed and monitored supplier quality products, failure analysis and correct action prevention.
  • Performed failure analysis of electronic, optical, and mechanical components and assemblies.
  • Performed problem solving and failure analysis, implementing corrective actions as needed.
  • Developed C based failure analysis techniques/tools for use by production.
  • Performed failure analysis supporting quality assurance and customer evaluation efforts.
  • Required to discuss failure analysis details in customer presentations.
  • Prepared system and module level failure analysis reports.
  • Studied and generated failure analysis report including recommendations.
  • Worked with Contract Manufacturer to perform failure analysis and resolve any Device Under Test (DUT) issues.
  • Performed extensive field failure analysis, identified root-causes, and eliminated top ten complaints within one year.
  • Maintain failure analysis databases and report trends to Program Management, Joint Venture Partner, and Customer.
  • Interfaced with users and vendors for failure analysis, root cause determination and solutions for corrective action.
  • Devised power conversion device failure verification techniques to gain failure analysis, root cause and corrective action.
  • Managed in-depth budding and tuning of custom hardware, as well as conducted failure analysis.
  • Executed root cause failure analysis for qualification tests, manufacturing tests, and returned products.
  • Performed failure analysis on hard disk drives for the System Engineering Team.
  • Direct and participate in failure analysis, Perform upgrades to test stands.
  • Performed failure analysis and repair of products returned from the field.

Show More

46. GPS

low Demand
Here's how GPS is used in Senior Electrical Engineer jobs:
  • Conceptualized feasible GPS-based systems solution including proof-of-principle demonstration, system/component characterization, analysis and optimization.
  • Applied Cloud Cap Satellite/GPS networks for unmanned aircraft vehicle integrated with Piccolo autopilot ground station.
  • Created high precision timing methods for synchronizing systems and events for use in initiation systems in denied wireless and GPS areas.
  • Trained as a Test Conductor and supported integration and testing on multiple programs (SBIRS, GPS III and GeoEye2)
  • Designed and built a device with a GPS module (with SIM card) able to receive phone calls.
  • Designed 68332-based controller board that supported interfaces to Cell phones, GPS, and a high-speed RF scanner.
  • Executed as module lead for customer funded research and development project of anti-jam GPS receiver.
  • Design included GPS, PLL's, high speed memories, and digital inputs.
  • Researched and found various models of UHF/VHF commercial antenna interfering with GPS receivers.
  • Analyzed RF, and error performance of GPS and BT circuits.
  • Worked on a GPS Simulator project.
  • Designed a computer interface controlling an antenna rotator, demonstrating a GPS controlled television acquisition system.
  • Developed hand-held GPS system hardware utilizing MPC821 for LCD controller, PCMCIA, Battery charge & power control and Ether-net interface.
  • Program Management of Projects Responsible for GPS/ILS/Marker Beacon/VOR systems on Boeing 737, 757, 767, 777 and MD-80 platforms.
  • Designed, and developed a GPS pseudolite providing a carrier tone to 8 GPS receivers improving system carrier phase measurements.
  • Designed a daughter card for the Simulator that included a GPS coder chip performing CA and P code baseband generation.
  • Developed 5" touch screen TFT LCD monitor for automobile GPS system.
  • Simulated regression suite for GPS ASIC using Questasim.
  • Helped design a GPS RF jammer system.
  • Created modernized GPS receiver module specification, maintained DOORS database, and produced traceability artifacts to satisfy contract deliverables.

Show More

47. Line Diagrams

low Demand
Here's how Line Diagrams is used in Senior Electrical Engineer jobs:
  • Designed electrical plans and one-line diagrams for power distribution.
  • Develop Electrical project documents like Single line diagrams, cable trays, lighting and grounding electrical, control drawings and plans.
  • Work includes, among other things, conceptual studies, voltage drop calculations, specification development and electrical one-line diagrams.
  • Generated single line diagrams, wiring diagrams, equipment layout and protective relaying for a 66 KV substation.
  • Prepared both the key single line and other single line diagrams for the 500KVA power generation and distribution.
  • Developed one-line diagrams, working plan drawings and as-built of commercial & industrial power distribution systems.
  • Created load lists, single-line diagrams, and equipment schedules from P&ID's.
  • Developed and made modifications to the ShipService Distribution System AC and DC One Line Diagrams.
  • Reviewed design specifications and single line diagrams submitted by B&V and WGI.
  • Single Line diagrams and control system planning were developed for the project.
  • Design activities I carried out includes: Preparation of Single line diagrams.
  • Interpret P&ID diagrams to create one and three line diagrams.
  • Developed specifications, one-line diagrams, equipment datasheets, schematics, and elevations.
  • Prepared Single Line Diagrams and design cable routings.

Show More

48. VFD

low Demand
Here's how VFD is used in Senior Electrical Engineer jobs:
  • Engaged in technical services for installation of variable frequency drive (VFD) for control of two fuel gas compressors.
  • Sized equipment, motor starters & circuit protectors, VFD's, soft starts, conduit and cable.
  • Included installation of new 230kV utility substation and 24000HP, VFD, Synchronous Motor Driven Gas Compressor.
  • Interfaced existing computer controls with new Controllers, HMI systems, Robotic Equipment and VFD's.
  • Installed a new hoist VFD on the Refinery tank house crane.
  • Selected and specified Reliance motors (DOL and VFD capable).
  • Designated as the VFD Subject Matter Expert on the IWTU project.
  • Developed VFD and low voltage MCC specification.
  • Modified crane controls (VFD) for the DWPF.
  • Verified SCR & VFD design drawings, load flow, short & Harmonics analysis using EDSA for Sagadril II Jack Up.
  • Prepared engineering modification design packages and tested adjustable frequency drives (vfd's) with IGBT technology for overhead cranes.
  • Provided procedural input to procedure writers concerning the startup and testing of the VFD's.
  • Developed Motion profile and interface to a Powerflex 700S Safety VFD.
  • Install and commission motor drive controllers (VFDs).
  • Program & configure PLCs and VFDs for product protection.

Show More

49. SKM

low Demand
Here's how SKM is used in Senior Electrical Engineer jobs:
  • Performed SKM calculations for a variety of projects, to include Medium Voltage installations.
  • Performed short circuit, coordination and arc-flash studies by using SKM- PTW software.
  • Used SKM to model overhead transmission lines from GIS Well Map.
  • Lead designers/drafters team, developed power studies using SKM.
  • Used SKM to provide a short circuit study.
  • Provided SKM load calculations and short circuit studies.
  • Performed relay coordination study using SKM.
  • Used SKM Power Tools software to perform power system protection & coordination studies of an onsite unit substation.
  • Performed the relay coordination and system protection study using CAPTOR (SKM system) and CYMCOORD software.
  • Used SKM PowerTools to create an electrical model of the Dupont/Invista electrical system.

Show More

50. IEC

low Demand
Here's how IEC is used in Senior Electrical Engineer jobs:
  • Develop power distribution design and equipment specifications using IEC standards for low voltage motor controls and emergency standby systems.
  • Ensured the design and testing of the project was carried out under safety and functionality standards such as UL and IEC.
  • Designed the product to meet IEC601-1 for Medical Device applications, and designed product to reduce Electromagnetic radiation and susceptibility.
  • Design machine safety function performance to meet ISO 13849 & 13850 as result of the IEC 12100 risk assessment.
  • Served as company expert on IEC-based design, and developed design standards for junior staff working on project.
  • Designed projects to meet specifications of customer requests as well as quality standards of IEC and UL.
  • Worked with IEC 61010-1 for laboratory equipment, 61010-2-101 for IVD equipment, 61010-2-080 for heating equipment.
  • Performed calculations and equipment selection based on IEC standards while complying with the principles of American codes.
  • Design of the second generation rack management separated the rack and node management into two different pieces.
  • Provided guidance for engineering/sales staff on medical device design, IEC 60601.
  • Developed product safety design & testing strategies to meet IEC-60601 requirements.
  • Write instruction and service manuals for each piece of equipment.
  • Perform validations per IEC 60601-1 and CSA International.
  • Created and Implemented IEC 60335 testing for products.
  • Assisted with UL and IEC project coordination.
  • Performed IEC cable sizing calculation.
  • Incorporated IEC 60950 safety requirements.
  • Project was IEC / ATEX design.
  • Developed earpiece electro-acoustics for 3 cellular telephone handset platforms.
  • Designed Handpiece Test Fixture; capable of calibrating laser hand pieces properly for accurate delivery of radiation in laser tissue treatments.

Show More

20 Most Common Skill for a Senior Electrical Engineer

Electrical Systems11.9%
Control Systems9.4%
Analog6.7%
Test Procedures6.5%
Electrical Design6.3%
PCB6.2%
PLC5.6%
Transformers4.7%

Typical Skill-Sets Required For A Senior Electrical Engineer

RankSkillPercentage of ResumesPercentage
1
1
Electrical Systems
Electrical Systems
7.5%
7.5%
2
2
Control Systems
Control Systems
5.9%
5.9%
3
3
Analog
Analog
4.3%
4.3%
4
4
Test Procedures
Test Procedures
4.1%
4.1%
5
5
Electrical Design
Electrical Design
4%
4%
6
6
PCB
PCB
3.9%
3.9%
7
7
PLC
PLC
3.5%
3.5%
8
8
Transformers
Transformers
3%
3%
9
9
Engineering Support
Engineering Support
3%
3%
10
10
Fpga
Fpga
2.7%
2.7%
11
11
Switchgear
Switchgear
2.6%
2.6%
12
12
High Voltage
High Voltage
2.3%
2.3%
13
13
Technical Support
Technical Support
2.3%
2.3%
14
14
Project Management
Project Management
2.2%
2.2%
15
15
CAD
CAD
2.2%
2.2%
16
16
Electric Motors
Electric Motors
2.1%
2.1%
17
17
System Design
System Design
2.1%
2.1%
18
18
Autocad
Autocad
2%
2%
19
19
Alarm Systems
Alarm Systems
1.8%
1.8%
20
20
KV
KV
1.8%
1.8%
21
21
Ethernet
Ethernet
1.7%
1.7%
22
22
UL
UL
1.6%
1.6%
23
23
Arc Flash
Arc Flash
1.4%
1.4%
24
24
R
R
1.4%
1.4%
25
25
NEC
NEC
1.4%
1.4%
26
26
EMI
EMI
1.4%
1.4%
27
27
HMI
HMI
1.4%
1.4%
28
28
MCC
MCC
1.3%
1.3%
29
29
PCS
PCS
1.3%
1.3%
30
30
I/O
I/O
1.3%
1.3%
31
31
EMC
EMC
1.3%
1.3%
32
32
Circuit Design
Circuit Design
1.3%
1.3%
33
33
Orcad
Orcad
1.3%
1.3%
34
34
Load Flow
Load Flow
1.3%
1.3%
35
35
Labview
Labview
1.3%
1.3%
36
36
Design Reviews
Design Reviews
1.3%
1.3%
37
37
Vhdl
Vhdl
1.2%
1.2%
38
38
Etap
Etap
1.2%
1.2%
39
39
USB
USB
1.2%
1.2%
40
40
Test Cases
Test Cases
1.2%
1.2%
41
41
DSP
DSP
1.2%
1.2%
42
42
Hvac
Hvac
1.1%
1.1%
43
43
Cost Estimates
Cost Estimates
1.1%
1.1%
44
44
Ieee
Ieee
1%
1%
45
45
Failure Analysis
Failure Analysis
1%
1%
46
46
GPS
GPS
1%
1%
47
47
Line Diagrams
Line Diagrams
1%
1%
48
48
VFD
VFD
0.9%
0.9%
49
49
SKM
SKM
0.9%
0.9%
50
50
IEC
IEC
0.9%
0.9%

26,304 Senior Electrical Engineer Jobs

Where do you want to work?