Senior electrical engineer jobs in Kentucky - 334 jobs

Full-time Description The Sr. Project Engineer is responsible for the complete electrical engineering scope of assigned projects. This person will lead all phases of an electrical engineering project to include concept, research, estimating support, component selection, network design, panel design, device layout, device troubleshooting, programming, in house testing, on-site installation, commissioning, and after-sales support. A successful Sr. Project Engineer has an expert level of knowledge and understanding of the full scope of electrical engineering practices, theories, and programming to implement the electrical engineering for a project from concept to completion. This person will create the project execution plan, assign tasks to resources, monitor and report progress, develop recovery plans, and manage deviations. The Electrical Sr Project Engineer serves as the subject matter expert (SME) for the project team and provides coaching and guidance. In collaboration with the Electrical Engineering Leadership team, the Electrical Sr. Project Engineer strives for continuous improvement in department processes and employing the latest technology and industry best practices in all facets of project execution. ESSENTIAL FUNCTIONS: Develop, manage, monitor, and maintain project schedules. Assign day to day tasks of project team members. Read and understand scope from contract documents and drawings. Effectively communicate project, department, and company requirements to project team or other stakeholders. Manage assigned projects to successful completion prioritizing safety, quality, schedule, and cost. Participate in, or complete personally, the design of the complete control systems including, power distribution, device layout, network design, panel layout, and device selection. Participate in, or complete personally, the programming, both HMI and PLC, of the complete control systems. Create Descriptions of Operations for complete systems. Communicates technical information to non-technical stakeholders, executive leadership, customers, and potential customers. Participate in, or complete personally, the commissioning of complete control systems. Strive for continuous improvement by identifying improvements in current processes and collaborate with management to adopt these improvements. Other responsibilities as needed. WORK ENVIRONMENT: Office setting and field locations. Collaborative, engaging, and success driven culture. Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Sitting for prolonged periods of time. Repetitive typing/data entry. Lifting up to 50 pounds. WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. Requirements REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: Expert level understanding of project management practices and tools. Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems. Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, baggage handling systems and manufacturing. Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers. Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment. Critical thinker and problem-solver. Self-starting instincts and strong analytical skills. Excellent verbal and written communications skills. Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: Bachelor's degree in engineering - preferably EE, EET or CECS, or equivalent work experience 8+ years in the electrical engineering field or related area, 6+ years in Material Handling Industry, preferably within Baggage Handling. 2+ years as Electrical Project Engineer, Legally authorized to work in the United States. Ability to obtain airport security clearance as needed. It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities. Salary Description $110,000 - $140,000 per year

Full-time Description C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Staff Instrumentation & Controls Engineer We are currently seeking a full-time Staff Instrumentation & Controls Engineer in our Louisville, KY office to help us achieve our company mission. This person will be part of the Electrical Engineering team, which is responsible for developing designs for electrical, instrument, and control systems and performing a variety of computer-based modeling, design, engineering, and planning tasks on projects. C&I is a full-service engineering design firm providing engineering/design/project management, and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: The Staff Instrumentation & Controls Engineer will be responsible for leading multi-disciple projects, including directing and monitoring support staff. Helping develop P&IDs and creating typical electrical and instrument design documents. Specifying process instrumentation including level, pressure, flow, temperature, and other related instrumentation. The Staff Instrumentation & Controls Engineer will prepare complete design packages including a scope of work that meets design intents and customer expectations. Minimum requirements: Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 10 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 12 years of relevant experience. Ability to travel domestically or internationally to client locations, vendor shops, and project sites. Travel may be up to 10% Experience required in chemical, refinery, or food & beverage industries for new or retrofit projects. Must comply with drug-free workplace requirements. Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks. Performs work in a safe manner in accordance with C&I and client requirements. Must be able to meet the physical demands of the job, which could include exposure to the weather, heights, small spaces, noise, etc. while working on job sites. Valid Driver's License Preferred qualifications that set you apart: Professional Engineer License Industry work experience Leadership experience Experience with SI or CAD Why join us: · Employee Owned · ESOP · 401k · Health Insurance · Dental & Vision · Optional 4-day Work Weeks · Salaried Employees are Paid Straight Time for Hours Worked Over 40 Our core values include: People: Building our company on diversity, development, and experience Quality: Doing the right things right Ownership: Holding ourselves and our teams accountable for results Service: Understanding our partnership and providing valued solutions Meet most but not all requirements? At C&I, we are dedicated to fostering a diverse and inclusive community that celebrates dedication and passion as much as past experience. If you are excited about this role and joining our team, we encourage you to still apply! You could be the perfect fit for this (or another) role. C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Salary Description $103,000 to $154,000 Per Year

Job Description Engineering Manager - Electrical Design Shift: First Shift About the Role Our client is seeking an Engineering Manager for Electrical Design to lead and develop their electrical design team within a fast-paced automation and material-handling environment. This leader will oversee all electrical design activities, support project execution, mentor engineers, and drive technical excellence across controls, schematics, PLC design, and system integration. The ideal candidate brings both strong engineering expertise and proven experience managing people. Key Responsibilities Lead and manage the electrical design engineering team, providing technical guidance, direction, and performance management. Oversee the development of electrical designs, schematics, control panel layouts, wiring diagrams, and PLC-based system architecture. Collaborate with mechanical design, project management, and installation teams to ensure seamless project execution. Remain hands-on in design work as needed, particularly during complex or high-priority projects. Review and approve engineering documentation, BOMs, and design packages. Ensure compliance with industry standards, customer specifications, and safety requirements. Support commissioning, testing, and troubleshooting activities as required. Lead continuous improvement initiatives within the design process, documentation, and engineering best practices. Maintain project schedules, resource allocation, and engineering workflow. Requirements Qualifications / Requirements Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, or related field required. 7+ years of electrical design engineering experience, including hands-on work with PLC systems, schematics, wiring diagrams, and industrial controls. 2+ years of experience managing or leading an engineering team. Experience in baggage handling, conveyor systems, automation, or small-part equipment design strongly preferred. Proficiency with AutoCAD Electrical (or similar design tools). Strong understanding of PLC hardware and controls integration. Ability to contribute both as a leader and as a hands-on engineer. Strong communication skills with the ability to collaborate cross-functionally. Ability to manage multiple projects and priorities in a dynamic environment.

Summary: As a Process and Instrumentation Engineer, you will be responsible for creating and maintaining the controls documentation that supports product development and continuous improvement efforts within KCC product lines. This position plays a critical role in ensuring that control system designs are clearly defined, well-documented, and aligned with the needs of multiple departments. You will work closely with cross-functional teams-including Electrical, Mechanical/Cabinet, R&D, and Testing & Validation-to translate system requirements into accurate Piping and Instrumentation Diagrams (P&IDs), Sequences of Operation (SoO), and Controls Functional Specifications. Over time, you will continue developing your knowledge in the industry components, uses, and documentation. In this role, you will also lead the specification and sourcing of HVAC controls end devices such as sensors, actuators, valves, and pressure transmitters. Your work will support initiatives in new product development, cost reduction, reliability improvement, and supplier diversification. You will evaluate and present business cases for alternative components, assist in validating new devices through lab testing, and provide technical guidance to ensure their proper application in production and field environments. This position offers a great opportunity for engineers that want to grow and sharpen their engineering knowledge, particularly in the HVAC&R industry, learning about the newest technologies being introduced, taking advantage of cutting-edge controls techniques, and the rapid development of new products. Essential Functions or Responsibilities: Create, maintain, and update documents related to HVAC&R controls processes: Piping and Instrument Diagrams (P&ID), Sequences of Operation (SoO), and assist with Controls Functional Specifications. Documents are developed working with R&D, New Product Development, and other departments for continuous improvement opportunities. Specify and source new HVAC control end devices (sensors, actuators, valves, pressure transmitters, etc.) for new product development, cost reduction, product improvement, reliability improvements, or providing multiple supply lines. Develop short business cases for switching end devices based on investigations for alternatives. Participate in new product development to specify when, what, and where end devices are installed within the units. Collaborate with the Testing and Validation team to create test plans for new sensors and end devices to confirm that they work for our applications before implementing into production. Provide guidance to other teams on troubleshooting devices or making sense of their use/application in the field. Qualifications/Skills: Requirements: Must be able to meet safety/physical requirements. Must meet educational or equivalent field experience: Bachelor's degree in engineering or related technical degree; or 5+ years holding a journeyman license and working on commercial HVAC systems, such as chillers, large packaged rooftop units, boilers, or air handlers. 2+ years of prior work experience in a technical role (engineering, HVAC commissioning, technician, laboratory, technical sales, thermal design, product development, etc.) Excellent communication and interpersonal skills. Proactive with reaching out to other departments and information gathering. Strong computer literacy and Microsoft Office Suite experience (Excel, Outlook, Word). Prefer: Experience creating process control documentation for equipment controls, manufacturing processes, chemical processes, etc. Experience working on an engineering team developing physical manufactured products. 2-5 years of experience working with HVAC equipment in the field or at a manufacturer. Strong understanding of HVAC controls, DX refrigerant systems, energy recovery, or applications for packaged rooftop systems. Applicable experience with HVAC standards for ASHRAE, AHRI, or other building codes. Safety/Physical requirements: Ability to lift 50 lbs. Fluent in English. Requires bending, stooping, and standing. Must be able to stand from six (6) to eight (8) hours per day. Follow established safety policies including, but not limited to, mobile equipment, PPE, emergency response, HAZCOM, first-aid response, etc. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required by the employee for this job. Duties, responsibilities, and activities may change over time with or without warning. KCC COMPANIES IS AN EQUAL OPPORTUNITY EMPLOYER For any questions you can contact: Terra Beaver - Talent Specialist - ****************** - ************ Laura Zoghbi - Talent Specialist - ****************** - ************

CEF Solutions Inc. is a Consulting Services and Business Process Outsourcing (BPO) company specializing in BPO Operations, Operations Management, Process Engineering and Innovation, Cost Optimization, and Staffing solutions. We take pride in our expertise in providing specialized staffing services, ensuring that clients in the Customer Service industry have access to top talent that aligns with their operational goals. We service some of the largest multinational companies in the world and are expanding quickly by delivering an unmatched end-to-end client experience. Company website: *********** Position Title: Automation & Controls Engineer Location: Remote (GA, AL, TN, KY, TX) Employment Type: Full-Time / On-site Department: Engineering / Manufacturing / Automation Overview We are seeking a highly skilled Automation & Controls Engineer with a strong multidisciplinary background in software control, electrical systems, and mechanical assembly. This role will support the installation, operation, troubleshooting, and optimization of automated equipment used in our production environment. The ideal candidate is a hands-on engineer with strong problem-solving abilities and the flexibility to work closely with cross-functional teams on the manufacturing floor. Key Responsibilities Automation & Control Systems Develop, modify, and troubleshoot automation programs, including PLC logic, C#, and related control software. Integrate new automation systems and improve existing equipment performance. Collaborate with software and control vendors to implement system updates and enhancements. Equipment Operation & Troubleshooting Operate, monitor, and maintain manufacturing equipment and automated production lines. Diagnose and resolve equipment malfunctions by leveraging electrical, software, and mechanical knowledge. Conduct root-cause analysis and implement corrective and preventive actions (CAPA). Electrical Systems Read and interpret electrical schematics, panel layouts, and wiring diagrams. Support electrical wiring, sensor installation, control panel troubleshooting, and system testing. Work with electricians and technicians to ensure safe and compliant electrical setups. Mechanical Assembly & Integration Perform mechanical assembly, disassembly, and adjustments of equipment and modules. Understand mechanical structures, actuators, pneumatics, and motion components. Collaborate with mechanical engineers during equipment installation and upgrades. Cross-functional Collaboration Partner with manufacturing, quality, and maintenance teams to enhance equipment reliability and productivity. Assist in standardizing procedures, documentation, and technical best practices. Support training for operators and maintenance personnel on new equipment and processes. Qualifications Required Bachelor's degree in Electrical Engineering, Mechanical Engineering, Mechatronics, Automation Engineering, or related field. Experience with PLC systems (Siemens, Allen-Bradley, Mitsubishi, or similar). Basic to intermediate proficiency in C# or similar control/automation programming languages. Strong understanding of electrical circuits, sensors, and wiring practices. Mechanical aptitude ability to understand equipment structures and perform hands-on assembly work. Proven ability to troubleshoot problems across automation, electrical, and mechanical domains. Ability to work in a fast-paced, production-oriented environment. Preferred Experience in semiconductor, battery, automotive, or industrial automation equipment. Familiarity with industrial networks (Ethernet/IP, ProfiNet, Modbus). Experience with motion control systems, robotics, or vision systems. Knowledge of safety systems and risk assessments (e-stops, interlocks, guarding). Prior experience installing and commissioning automation equipment. Soft Skills Strong problem-solving and analytical abilities Excellent communication and teamwork skills Ability to manage multiple tasks and prioritize effectively Self-driven, hands-on, and comfortable working on the production floor Working Conditions On-site engineering support in manufacturing or equipment installation environment May require occasional travel for equipment installation, vendor support, or training Ability to lift equipment components as needed (typically up to 2540 lbs/1020 kg)

Link-Belt Cranes is a global leader in the design, manufacture and sales of mobile cranes. Founded over 150 years ago, with corporate headquarters in Lexington, Kentucky, join an organization that understands its greatest resource is people and they are what makes the difference. Currently we have an Electrical Design Engineer role open. As a member of the Design Engineering team, one will be responsible for designing and developing electrical circuits and controls for products that meet company goals of Safety, Quality, Cost and Delivery. Essential functions of the position include: Investigate and develop cost-effective electrical systems governing the performance and/or design of a new or existing product addressing circuit logic, current loads, resistance, amperage, and voltage using the appropriate calculations Prepare and check detail drawings for accuracy and conformance to Link-Belt Design Policies Create electrical system schematics that guide the crane control architecture Interact with suppliers to obtain component information and identify/select electrical components for mobile equipment applications Prepare, check and/or revise engineering orders and bills of materials per Link-Belt Design Policies Interpret electrical standards relevant to mobile equipment applications and incorporate requirements into crane system design Prepare and review assembly drawings for proper fit, completeness and including all necessary dimensions Investigate and design solutions for “sales special” request as needed Investigate field service issues and make recommendations for corrections Support prototype assembly process as needed Support manufacturing areas as needed during assembly and testing processes Resolve manufacturing issues identified by production engineering, material sourcing, and assemblers Coordinate the work of other personnel to complete designs Prepare project time estimates and coordinate schedule attainment in conjunction with overall product timeline. General qualifications for this role: Bachelor's degree in Electrical Engineering Minimum of three (3) years of experience in electrical engineering Proficient in AutoCAD and other design software *Link-Belt Cranes does not accept unsolicited resumes or calls from third-party recruiters or employment agencies**

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Overview:Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization:The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities:The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: + Development of project scope + Engineering oversight + Technical design + Cost estimating + Schedule development + Evaluating and summarizing bid sets + Construction supervision + Safety leadership + Coordination with operations groups + Project documentation + Travel ranges from 15-45% Qualifications: + Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. + Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. + Strong academic performance. + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Availability to work 40 hours per week. + Positions are available Spring, Summer, and Fall semesters. + Availability for multiple work terms is preferred. + Many projects will require travel to construction sites; therefore, a valid driver's license is required. + Military experience a plus. + MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018403 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Catlettsburg, Kentucky, East Sparta, Ohio, La Palma, California, Owensboro, Kentucky, Pasadena, Texas, Salt Lake City, Utah, Tampa, Florida, Vernon, Illinois, Wood River, Illinois Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start **May 2026** **and go through Summer 2026. Dates are flexible with school calendar** . Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. + Produce detailed layout and equipment details of electrical systems of buildings, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** + Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), + Strong interest in Building Systems Electrical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer 2026. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. Produce detailed layout and equipment details of electrical systems of buildings, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), Strong interest in Building Systems Electrical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. #LI-RH1 #LI-Onsite

Electrical Engineering Intern Paducah, KY Bacon Farmer Workman Engineering & Testing, Inc. (BFW), and Marcum Engineering, LLC, are actively seeking Interns to join our team during our Summer Internship Program. This is an excellent opportunity to learn more about your chosen field and work in a professional, fast-paced environment. We are currently looking to fill the following Intern positions in these locations: Civil Engineering Intern - Paducah, KY Electrical Engineering Internship - Paducah, KY Mechanical Engineering Internship - Paducah, KY Project Manager Intern - Paducah, Kentucky Environmental Engineering Intern - Paducah, KY Geotechnical Engineering Intern - Belleville, IL Transportation Engineering Intern - Cape Girardeau, MO Structural Engineering Intern - Champaign, IL Qualifications: Minimum 2 years of ABET-accredited college education completed Excellent verbal and written communication skills Strong problem-solving and analytical skills Ability to work in a team environment Self-motivated and eager learner, with an aptitude to grow and develop within the field Basic knowledge and experience in Microsoft Office programs, including Word, Excel, PowerPoint, and Outlook MicroStation, Revit, and AutoCAD experience are a plus By completing the online application, Applicant certifies that the information they have provided is true, complete, and correct. Applicant further understands that any information provided by the Applicant which is found to be false, incomplete, or misrepresented in any respect will be sufficient cause to (i) eliminate me from further consideration for employment, or (ii) may result in my immediate discharge from employment when it is discovered. Applicant expressly authorizes, without reservation, the employer, its representatives, employees, or agents to contact and obtain information from all references (Personal and Professional), employers, public agencies, licensing authorities, and educational institutions, and to otherwise verify the accuracy of all information provided by me in this application, resume, or any job interview. I hereby waive any and all rights and claims I may have regarding the employer, its agents, employees, or representatives, for seeking, gathering, and using truthful and non-defamatory information, in a lawful manner, in the employment process, and all other persons, corporations, or organizations for furnishing such information about me. I understand the position I am applying for is an at-will position, meaning that either the Employer or I may terminate our relationship at any time, with or without cause, except as required by law. This application does not constitute an agreement or contract for employment for any specified period of time or duration. I understand that no supervisor or representative of Employer is authorized to make any assurances to the contrary and that no implied written or oral agreements contrary to the foregoing express language are valid unless they are in writing and signed by the employer's chief executive officer. Applicant understands and acknowledges that, if hired, they will be required to provide proof of identity and legal authorization to work in the United States, and that federal immigration laws require me to complete an I-9 form for this purpose. Bacon Farmer Workman Engineering & Testing, Inc. and Marcum Engineering LLC are proud to be Equal Opportunity Employers, committed to a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, veteran status, genetics, citizenship status, or any other legally protected basis.

At Delta Faucet, we are committed to transforming everyday experiences with water through innovative products and exceptional service. As a leader in the plumbing industry, we take pride in our dedication to quality, sustainability, and customer satisfaction. We believe that diverse perspectives strengthen our mission to create solutions that inspire and elevate the lives of all our customers. We welcome individuals from all backgrounds to join us on this journey toward inclusivity and excellence.Your role at Delta Faucet: The Lead Automation Engineer will work across a variety of functional groups that are directly involved in engineering, product development, and implementation. The ideal candidate is an inventive problem solver that can work through technical challenges and employing pragmatic solutions within our technical and maintenance departments. Responsibilities: Automation Strategy and Leadership Lead the design, implementation, and continuous improvement of automation systems across manufacturing operations. Serve as the technical authority for PLCs, HMIs, robotics, vision systems, and industrial networks. Maintain accurate electrical schematics, network diagrams, and software backups. System Design & Implementation Design control systems including PLC logic, HMI screens, safety circuits, and network architecture. Lead new equipment integration, upgrades, and retrofits. Specify hardware and software for automation projects (PLCs, drives, sensors, safety devices). Oversee system commissioning, startup, and validation. Troubleshooting & Reliability Act as escalation support for complex automation and controls issues. Perform root cause analysis on equipment failures related to controls, software, or networks. Team Leadership & Development Mentor and guide automation engineers, controls technicians, maintenance staff, and engineering interns. Project Management Lead automation-focused capital projects from concept through handoff. Develop project scopes, timelines, budgets, and risk assessments. Coordinate with engineering, maintenance, operations, safety, IT, and vendors. Ensure projects are delivered on time, within budget, and to specification. Select, manage, and evaluate automation vendors and system integrators. Review and approve vendor designs, FAT/SAT documentation, and deliverables. Continuous Improvement & Innovation Identify opportunities for automation to improve efficiency, quality, and ergonomics. Evaluate emerging automation technologies and recommend adoption where beneficial. Support data collection and OEE improvements. Work closely with maintenance to improve troubleshooting capability and ownership. Required Qualifications Bachelor's degree in engineering. 5-10+ years of experience in industrial automation or controls engineering. Strong expertise in PLC programming, HMIs, and industrial networking. Experience with machine safety systems and applicable codes/standards. Direct experience using 3D modeling software. Proven ability to lead projects and provide technical mentorship. Preferred Qualifications Experience with robotics, vision systems, and data integration. Rockwell Automation-Allen Bradley programming/product experience. Prior leadership or lead engineer experience in a manufacturing environment. Familiarity with vendor management and system integrator oversight. Why Join Us? At Delta Faucet Company, our people are our greatest assets. We value different perspectives and fostering an inclusive environment. You'll have the opportunity to shape the future of our brand, working alongside passionate professionals committed to excellence and innovation. Join us to lead progressive growth and make a significant impact within a leading organization. Here are some of the benefits we offer for your personal and professional growth: Culture: Recognized and award-winning reputation for equality, diversity and inclusion, flexibility, work-life balance, and more. Wellbeing: Comprehensive benefit plans; retirement, savings, tuition reimbursement, and employee incentive programs; resources for mental, physical, and financial wellbeing. Learning & Development: LinkedIn Learning access; internal opportunities to work on projects cross-company. Social Impact: Four employee-led and self-directed Business Resource Groups; Paid volunteer day annually; Employees share their time, skills and talent with charities and nonprofit organizations across the U.S. and around the globe. Company: Delta Faucet CompanyShift 1 (United States of America) Full time Delta Faucet Company (the “Company”) is an equal opportunity employer and we strive to employ the most qualified individuals for every position . The Company makes employment decisions only based on merit. It is the Company's policy to prohibit discrimination in any employment opportunity (including but not limited to recruitment, employment, promotion, salary increases, benefits, termination and all other terms and conditions of employment) based on race, color, sex, sexual orientation, gender, gender identity, gender expression, genetic information, pregnancy, religious creed, national origin, ancestry, age, physical/mental disability, medical condition, marital/domestic partner status, military and veteran status, height, weight or any other such characteristic protected by federal, state or local law. The Company is committed to complying with all applicable laws providing equal employment opportunities. This commitment applies to all people involved in the operations of the Company regardless of where the employee is located and prohibits unlawful discrimination by any employee of the Company. Delta Faucet Company is an E-Verify employer. E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. Please click on the following links for more information. E-Verify Participation Poster: English & Spanish E-verify Right to Work Poster: English, Spanish

Engineering Manager - Electrical Design Shift: First Shift About the Role Our client is seeking an Engineering Manager for Electrical Design to lead and develop their electrical design team within a fast-paced automation and material-handling environment. This leader will oversee all electrical design activities, support project execution, mentor engineers, and drive technical excellence across controls, schematics, PLC design, and system integration. The ideal candidate brings both strong engineering expertise and proven experience managing people. Key Responsibilities Lead and manage the electrical design engineering team, providing technical guidance, direction, and performance management. Oversee the development of electrical designs, schematics, control panel layouts, wiring diagrams, and PLC-based system architecture. Collaborate with mechanical design, project management, and installation teams to ensure seamless project execution. Remain hands-on in design work as needed, particularly during complex or high-priority projects. Review and approve engineering documentation, BOMs, and design packages. Ensure compliance with industry standards, customer specifications, and safety requirements. Support commissioning, testing, and troubleshooting activities as required. Lead continuous improvement initiatives within the design process, documentation, and engineering best practices. Maintain project schedules, resource allocation, and engineering workflow. Requirements Qualifications / Requirements Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, or related field required. 7+ years of electrical design engineering experience, including hands-on work with PLC systems, schematics, wiring diagrams, and industrial controls. 2+ years of experience managing or leading an engineering team. Experience in baggage handling, conveyor systems, automation, or small-part equipment design strongly preferred. Proficiency with AutoCAD Electrical (or similar design tools). Strong understanding of PLC hardware and controls integration. Ability to contribute both as a leader and as a hands-on engineer. Strong communication skills with the ability to collaborate cross-functionally. Ability to manage multiple projects and priorities in a dynamic environment.

Job DescriptionDescription: The Sr. Project Engineer is responsible for the complete electrical engineering scope of assigned projects. This person will lead all phases of an electrical engineering project to include concept, research, estimating support, component selection, network design, panel design, device layout, device troubleshooting, programming, in house testing, on-site installation, commissioning, and after-sales support. A successful Sr. Project Engineer has an expert level of knowledge and understanding of the full scope of electrical engineering practices, theories, and programming to implement the electrical engineering for a project from concept to completion. This person will create the project execution plan, assign tasks to resources, monitor and report progress, develop recovery plans, and manage deviations. The Electrical Sr Project Engineer serves as the subject matter expert (SME) for the project team and provides coaching and guidance. In collaboration with the Electrical Engineering Leadership team, the Electrical Sr. Project Engineer strives for continuous improvement in department processes and employing the latest technology and industry best practices in all facets of project execution. ESSENTIAL FUNCTIONS: Develop, manage, monitor, and maintain project schedules. Assign day to day tasks of project team members. Read and understand scope from contract documents and drawings. Effectively communicate project, department, and company requirements to project team or other stakeholders. Manage assigned projects to successful completion prioritizing safety, quality, schedule, and cost. Participate in, or complete personally, the design of the complete control systems including, power distribution, device layout, network design, panel layout, and device selection. Participate in, or complete personally, the programming, both HMI and PLC, of the complete control systems. Create Descriptions of Operations for complete systems. Communicates technical information to non-technical stakeholders, executive leadership, customers, and potential customers. Participate in, or complete personally, the commissioning of complete control systems. Strive for continuous improvement by identifying improvements in current processes and collaborate with management to adopt these improvements. Other responsibilities as needed. WORK ENVIRONMENT: Office setting and field locations. Collaborative, engaging, and success driven culture. Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Sitting for prolonged periods of time. Repetitive typing/data entry. Lifting up to 50 pounds. WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. Requirements: REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: Expert level understanding of project management practices and tools. Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems. Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, baggage handling systems and manufacturing. Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers. Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment. Critical thinker and problem-solver. Self-starting instincts and strong analytical skills. Excellent verbal and written communications skills. Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: Bachelor's degree in engineering - preferably EE, EET or CECS, or equivalent work experience 8+ years in the electrical engineering field or related area, 6+ years in Material Handling Industry, preferably within Baggage Handling. 2+ years as Electrical Project Engineer, Legally authorized to work in the United States. Ability to obtain airport security clearance as needed. It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities.

Job DescriptionDescription: C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Staff Instrumentation & Controls Engineer We are currently seeking a full-time Staff Instrumentation & Controls Engineer in our Louisville, KY office to help us achieve our company mission. This person will be part of the Electrical Engineering team, which is responsible for developing designs for electrical, instrument, and control systems and performing a variety of computer-based modeling, design, engineering, and planning tasks on projects. C&I is a full-service engineering design firm providing engineering/design/project management, and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: The Staff Instrumentation & Controls Engineer will be responsible for leading multi-disciple projects, including directing and monitoring support staff. Helping develop P&IDs and creating typical electrical and instrument design documents. Specifying process instrumentation including level, pressure, flow, temperature, and other related instrumentation. The Staff Instrumentation & Controls Engineer will prepare complete design packages including a scope of work that meets design intents and customer expectations. Minimum requirements: Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 10 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 12 years of relevant experience. Ability to travel domestically or internationally to client locations, vendor shops, and project sites. Travel may be up to 10% Experience required in chemical, refinery, or food & beverage industries for new or retrofit projects. Must comply with drug-free workplace requirements. Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks. Performs work in a safe manner in accordance with C&I and client requirements. Must be able to meet the physical demands of the job, which could include exposure to the weather, heights, small spaces, noise, etc. while working on job sites. Valid Driver's License Preferred qualifications that set you apart: Professional Engineer License Industry work experience Leadership experience Experience with SI or CAD Why join us: · Employee Owned · ESOP · 401k · Health Insurance · Dental & Vision · Optional 4-day Work Weeks · Salaried Employees are Paid Straight Time for Hours Worked Over 40 Our core values include: People: Building our company on diversity, development, and experience Quality: Doing the right things right Ownership: Holding ourselves and our teams accountable for results Service: Understanding our partnership and providing valued solutions Meet most but not all requirements? At C&I, we are dedicated to fostering a diverse and inclusive community that celebrates dedication and passion as much as past experience. If you are excited about this role and joining our team, we encourage you to still apply! You could be the perfect fit for this (or another) role. C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Requirements:

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018187 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start **May 2026** **and go through Summer 2026. Dates are flexible with school calendar** . Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. + Produce detailed layout and equipment details of electrical systems of buildings, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** + Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), + Strong interest in Building Systems Electrical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer 2026. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in electrical design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team and independently. Our engineers will teach the student co-op how we design and implement electrical systems/infrastructure as well as energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Learn and implement the electrical system basics such as power, power distribution, lighting & controls, fire alarm systems for new constructions and renovation design projects while supporting our engineering team. Produce detailed layout and equipment details of electrical systems of buildings, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a bachelor's degree in Electrical Engineering or Architectural Engineering, preferably a sophomore (2nd year) or a junior (3rd year), Strong interest in Building Systems Electrical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. We are unable to provide immigration sponsorship for this position. #LI-RH1 #LI-Onsite

Job DescriptionDescription: The Electrical Project Engineer is responsible for the complete electrical engineering scope of assigned projects. This person will lead all phases of an electrical engineering project to include concept, research, estimating support, component selection, network design, panel design, device layout, device troubleshooting, programming, in house testing, on-site installation, commissioning, and after-sales support. A successful Electrical Project Engineer has a high level of knowledge and understanding of the full scope of electrical engineering practices, theories, and programming to implement electrical engineering for a project from concept to completion. This person will create the project execution plan, assign tasks to resources, monitor and report progress, develop recovery plans, and manage deviations. The Electrical Project Engineer serves as the subject matter expert (SME) for the project team and provides coaching and guidance. In collaboration with the Electrical Engineering Leadership team, the Electrical Project Engineer strives for continuous improvement in department processes and employing the latest technology and industry best practices in all facets of project execution. ESSENTIAL FUNCTIONS: Develop, manage, monitor, and maintain project schedules. Assign day to day tasks of project team members. Read and understand scope from contract documents and drawings. Effectively communicate project, department, and company requirements to project team or other stakeholders. Manage assigned projects to successful completion prioritizing safety, quality, schedule, and cost. Participate in, or complete personally, the design of the complete control systems including, power distribution, device layout, network design, panel layout, and device selection. Participate in, or complete personally, the programming, both HMI and PLC, of the complete control systems. Create Descriptions of Operations for complete systems. Communicates technical information to non-technical stakeholders, executive leadership, customers, and potential customers. Participate in, or complete personally, the commissioning of complete control systems. Strive for continuous improvement by identifying improvements in current processes and collaborate with management to adopt these improvements. Other responsibilities as needed. WORK ENVIRONMENT: Office setting and field locations. Collaborative, engaging, and success driven culture. Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Sitting for prolonged periods of time. Repetitive typing/data entry. Lifting up to 50 pounds. WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. Requirements: REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: Excellent level understanding of project management practices and tools. Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems. Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, baggage handling systems and manufacturing. Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers. Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment. Critical thinker and problem-solver. Self-starting instincts and strong analytical skills. Excellent verbal and written communications skills. Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: Bachelor's degree in engineering - preferably EE, EET or CECS, or equivalent work experience 3+ years in the electrical engineering field or related area 2+ years in Material Handling Industry, preferably within Baggage Handling. 1+ years as Electrical Project Engineer Legally authorized to work in the United States. Ability to obtain airport security clearance as needed. It is the policy of ControlTouch Systems, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems, LLC will provide reasonable accommodation for qualified individuals with disabilities.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Overview:Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization:The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities:The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: + Development of project scope + Engineering oversight + Technical design + Cost estimating + Schedule development + Evaluating and summarizing bid sets + Construction supervision + Safety leadership + Coordination with operations groups + Project documentation + Travel ranges from 15-45% Qualifications: + Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. + Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. + Strong academic performance. + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Availability to work 40 hours per week. + Positions are available Spring, Summer, and Fall semesters. + Availability for multiple work terms is preferred. + Many projects will require travel to construction sites; therefore, a valid driver's license is required. + Military experience a plus. + MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018403 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Catlettsburg, Kentucky, East Sparta, Ohio, La Palma, California, Owensboro, Kentucky, Pasadena, Texas, Salt Lake City, Utah, Tampa, Florida, Vernon, Illinois, Wood River, Illinois Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.