Senior electrical engineer jobs in Nevada

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. Job Summary -- Essential Functions/Duties An Engineer V serves as a principal investigator and individual contributor to contract research, development, integration, and sustainment projects. Employee will be responsible for the following functions/duties: Perform RF measurements using tools such as spectrum analyzers, vector network analyzers (VNAs), signal generators, and oscilloscopes. Design and execute test plans for RF components, antennas, and systems, ensuring compliance with specifications (e.g., 5G, Wi-Fi, or radar standards). Analyze measurement data, troubleshoot performance issues, and provide actionable recommendations to improve system design. Document test procedures, results, and technical reports for internal teams and regulatory compliance. Stay updated on industry standards and emerging RF technologies to enhance testing methodologies. Desired Qualifications Proficiency with RF test equipment (e.g., Keysight, Rohde & Schwarz, or Anritsu tools). Experience with RF simulation and analysis software (e.g., MATLAB, LabVIEW, ADS, or HFSS). Strong analytical and problem-solving skills to interpret complex RF measurement data. Familiarity with EMI/EMC testing or antenna design is a plus. Experience with automated test systems or scripting (e.g., Python) for measurement automation. Knowledgeable on programming and implementation of software defined radios (SDR) and universal software radio peripherals (USRP) in a test environment. Requirements -- Education, Technical, and Work Experience A Bachelor of Science in engineering from an ABET-accredited academic institution and four years of related engineering experience, or an accredited Master of Science in engineering and a minimum of two years of related engineering experience, or an accredited doctorate degree in engineering are required for this position. In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area Working knowledge of computer systems and computer-based engineering tools Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills and the ability to work under deadlines Salary The expected salary range for this position is $91K to $144K annually. Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay. JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer. Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. Working Conditions Work is performed in a typical office environment with no unusual hazards. Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required. Travel to remote company work locations may be required. Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JCORP12; JENG17

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace (**************************************************************************** UpdateUrns=urn%3Ali%3Aactivity%3A**********048001024) **Your role at Clorox:** We're looking for a skilled and driven Electrical, Instrumentation & Controls (EIC) Engineer to join our Plant Engineering team in Reno, NV. This role is critical to supporting our manufacturing operations and advancing our Operations Excellence initiatives. You will play a key role in driving technical excellence across our manufacturing and business operations. This position offers a unique opportunity to lead impactful capital projects, enhance operational reliability. **In this role, you will:** **Operational Technical Support** + Act as the go-to expert for electrical systems, controls, and instrumentation. Provide hands-on support to manufacturing operations and maintenance initiatives, serve as the plant's electrical safety specialist, and collaborate with control system specialists to maintain and improve system reliability. + Troubleshoot PLCs, HMIs, instrumentation, OT networks, and electrical control issues. + Provide hands-on support to maintenance and operations during breakdowns and chronic issues. + Act as plant electrical safety champion and ensure compliance with NFPA 70E and internal standards. + Support MES data flow and system reliability: PLC to MES connectivity, loss reason tagging issues, line status mismatches, and basic MES troubleshooting. + Partner with the MES Lead and central OT&EIC on sustaining MES infrastructure, shift handoff issues, and basic configuration fixes. + Support system start-ups, commissioning, and configuration. **Capital Project Support** + Serve as the electrical engineering lead on cross-functional capital project teams, ensuring safe, efficient, and cost-effective design and implementation. + Lead small to medium automation, controls, and OT infrastructure projects + Support large capital projects as the site EIC lead, ensuring designs meet plant standards and manufacturability requirements. + Manage contractors and vendors during project execution. **Feasibility & Improvement Analysis** + Conduct electrical engineering feasibility studies for new projects and process improvements, identifying opportunities for innovation, cost savings, and performance enhancements. **Engineering & Administrative Leadership** + Lead or support various engineering and administrative initiatives, including documentation, compliance, and continuous improvement efforts. + Partner with maintenance and operations to resolve recurring losses and implement permanent corrective actions. + Participate in root cause analysis for automation, instrumentation, and electrical failures. - Identify opportunities for process improvements, standardization, and technology upgrades. **Documentation, Standards, and Cybersecurity** + Maintain P&IDs, electrical drawings, panel schematics, and change logs. + Apply Clorox engineering and EIC standards and ensure documentation accuracy. + Support basic cyber hygiene: account access control, patching windows, secure configurations, and alignment to central OT&EIC guidance. + Ensure alignment with PLC/HMI/SCADA lifecycle expectations. **Cross-Functional & Corporate Collaboration** + Work with central OT&EIC on standards, system lifecycle, network architecture, and cyber requirements. + Partner with Ops Excellence, HSE, Quality, and Production on improvements, safety compliance, and process upgrades. + Mentor technicians and junior engineering staff; provide coaching during troubleshooting and project work. **Reliability and Continuous Improvement** + Partner with maintenance and operations to resolve recurring losses and implement permanent corrective actions. + Participate in root cause analysis for automation, instrumentation, and electrical failures. + Identify opportunities for process improvements, standardization, and technology upgrades. **Documentation, Standards, and Cybersecurity** + Maintain P&IDs, electrical drawings, panel schematics, and change logs. + Apply Clorox engineering and EIC standards and ensure documentation accuracy. + Support basic cyber hygiene: account access control, patching windows, secure configurations, and alignment to central OT&EIC guidance. + Ensure alignment with PLC/HMI/SCADA lifecycle expectations. **Cross-Functional & Corporate Collaboration** + Work with central OT&EIC on standards, system lifecycle, network architecture, and cyber requirements. + Partner with Ops Excellence, HSE, Quality, and Production on improvements, safety compliance, and process upgrades. + Mentor technicians and junior engineering staff; provide coaching during troubleshooting and project work. **Cross-Functional Leadership** + Lead and influence cross-functional project teams, including Process Engineers, Maintenance, Contractors, and external consultants. + Direct the work of outside engineering firms and construction managers during project design and implementation. + Collaborate with: + Operations / Process Improvement Technicians to develop One Point Lessons, Job Aids, and standard work. + Safety Manager to ensure electrical safety compliance. + Quality to ensure repeatable, high-quality output on equipment and processes and complies with all food safety protocols. **Technical Expertise** + Troubleshoot and repair electrical/control systems using equipment manuals, system drawings, P&IDs, schematics, and blueprints. + Interpret and apply industry, regulatory, and company specifications and standards to projects. + Support system start-up and commissioning, including configuration, wiring, calibration, and power testing. **Corporate Collaboration** + Interface with corporate engineering to influence design for manufacturability and ensure smooth commissioning of new lines. **Budget Responsibility** + Develop and manage expense and capital budgets for assigned projects. + Maintain scope, spending, and forecasting within approved budgets. + Typical project budgets range up to $500k, with occasional projects exceeding that amount. \#LI-Onsite **What we look for:** **Minimum Qualifications:** + **Bachelor's degree in electrical/Mechatronics Engineering, or similar with** ** 5** **years of professional experience,** + **Strong emphasis on** ** Allen-Bradley and Siemens control systems.** + **Solid understanding of electrical systems, instrumentation, and industrial automation.** + **Experience in project management, budgeting, and procurement.** + **Self-Starter with "Can Do" Attitude with a demonstrated ability to work with a minimum of supervision** + **Strong interpersonal, organizational, communication, collaboration, and leadership skills with the ability to interface with various levels in the organization** + **Attention to Detail** + **Excellent Attendance** + **Demonstrated Safety Awareness and Priority** + **Demonstrated Leadership and Mentoring** + **Analytical Thinking** + **Strong technical and troubleshooting skills related to electrical, instrumentation, controls, and power distribution / MCC's / conduit and wiring** + **Ability to develop, read, and interpret P&IDs and electrical drawings** + **Working knowledge of NEC, ANSI, IEC, NEMA, NFPA** + **Hands On - 50% of job is on the floor in the production environment.** **Desired Qualifications:** + **Allen Bradley and Siemens PLC Controls Experience** + **Vision Systems Experience** + **Robotic Experience (FANUC)** + **HMI Development Experience** + **Electrical Power System Maintenance** + **Mechanical Aptitude** + **Hydraulic and Pneumatic System Knowledge** + **Experience in process batch and discrete manufacturing** + **Working knowledge of data collection systems** + **Engineering or operations experience with consumer-packaged goods packaging equipment and systems preferred** + **Food Manufacturing Experience Preferred** **Workplace type:** Onsite 5 days a week **Our values-based culture connects to our purpose and empowers people to be their best, professionally and personally. We serve a diverse consumer base which is why we believe teams that reflect our consumers bring fresh perspectives, drive innovation, and help us stay attuned to the world around us. That's why we foster an inclusive culture where every person can feel respected, valued, and fully able to participate, and ultimately able to thrive.** Learn more (********************************************************************************************************* **.** **[U.S.]Additional Information:** At Clorox, we champion people to be well and thrive, starting with our own people. To help make this possible, we offer comprehensive, competitive benefits that prioritize all aspects of wellbeing and provide flexibility for our teammates' unique needs. This includes robust health plans, a market-leading 401(k) program with a company match, flexible time off benefits (including half-day summer Fridays depending on location), inclusive fertility/adoption benefits, and more. We are committed to fair and equitable pay and are transparent with current and future teammates about our full salary ranges. We use broad salary ranges that reflect the competitive market for similar jobs, provide sufficient opportunity for growth as you gain experience and expand responsibilities, while also allowing for differentiation based on performance. Based on the breadth of our ranges, most new hires will start at Clorox in the first half of the applicable range. Your starting pay will depend on job-related factors, including relevant skills, knowledge, experience and location. The applicable salary range for every role in the U.S. is based on your work location and is aligned to one of three zones according to the cost of labor in your area. -Zone A: $88,700 - $165,900 -Zone B: $81,300 - $152,100 -Zone C: $73,900 - $138,300 All ranges are subject to change in the future. Your recruiter can share more about the specific salary range for your location during the hiring process. This job is also eligible for participation in Clorox's incentive plans, subject to the terms of the applicable plan documents and policies. Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes. **Who we are.** We champion people to be well and thrive every single day. We're proud to be in every corner of homes, schools, and offices-making daily life simpler and easier through our beloved brands. Working with us, you'll join a team of passionate problem solvers and relentless innovators fueled by curiosity, growth, and progress. We relish taking on new, interesting challenges that allow our people to collaborate and thrive at work. And most importantly, we care about each other as multifaceted, whole humans. Join us as we reimagine what's possible and work with purpose to make a difference in the world. **This is the place where doing the right thing matters.** Doing the right thing is the compass that guides every decision we make-and we're proud to be globally recognized and awarded for our continuous corporate responsibility efforts. Clorox is a signatory of the United Nations Global Compact and the Ellen MacArthur Foundation's New Plastics Economy Global Commitment. The Clorox Company and its Foundation prioritize giving back to the communities we call home and contribute millions annually in combined cash grants, product donations, and cause-marketing. For more information, visit TheCloroxCompany.com and follow us on social media at @CloroxCo. **Our commitment to diversity, inclusion, and equal employment opportunity.** We seek out and celebrate diverse backgrounds and experiences. We're always looking for fresh perspectives, a desire to bring your best, and a nonstop drive to keep growing and learning. Learn more about our Inclusion, Diversity, Equity, and Allyship (IDEA) journey here (*********************************************** . The Clorox Company and its subsidiaries are an EEO/AA/Minorities/Women/LGBT/Protected Veteran/Disabled employer. Learn more to Know Your Rights (*********************************************************************************************** . Clorox is committed to providing reasonable accommodations for qualified applicants with disabilities and disabled veterans during the hiring and interview process. If you need assistance or accommodations due to a disability, please contact us at ***************** . Please note: this inbox is reserved for individuals with disabilities in need of assistance and is not a means of inquiry about positions/application statuses. The Clorox Company and its subsidiaries are an EEO/AA/ Minorities/Women/LGBT/Protected Veteran/Disabled employer.

Redwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Founded in 2019, we're delivering low-cost and large-scale energy storage and producing battery materials in the U.S. for the first time, all from batteries we already have. Staff High Voltage Electrical Engineer, EPC Redwood Materials is seeking a Staff High Voltage Electrical Engineer to join our EPC team. This role is central to the design of high voltage electrical infrastructure to support our mission. Our mission is to build a sustainable circular economy for lithium-ion batteries by transforming recycled materials into high-quality inputs for new batteries. Responsibilities will include: Lead the design of high voltage AC electrical systems, specifically for industrial substations (69kV to 345kV) and their integration with upstream transmission lines and downstream MV distribution. Review and evaluate the design of existing substations to provide recommendations for improving reliability and stability. Develop single-line diagrams, physical layout and design, protection and control systems, relay design and coordination, and grounding plans for substations. Perform grid simulation and stability studies using industry standard tools such as PSSE, PSLF, PSCAD, ASPEN OneLiner and similar software. Interface with utilities and ISO/RTOs to support interconnection studies, permitting, and compliance for new renewable and BESS projects. Perform short circuit, load flow, and arc flash studies. Develop relay settings using SEL AcSELerator or equivalent software. Evaluate and select high voltage equipment including switchgear, circuit breakers, transformers, reactors, PTs, CTs, and protection relays. Serve as Electrical Engineer of Record for assigned projects. Lead code compliance reviews (NEC, IEEE, NESC, NFPA) and provide technical guidance to internal teams. Collaborate with civil and structural engineers on substation layout, foundations, and site development. Support facilities, construction and commissioning teams with field engineering, testing, and troubleshooting. Review vendor submittals, RFIs, and shop drawings for technical accuracy. Participate in technical bid evaluations and identify scope gaps. Lead R&D efforts to perform feasibility analysis of using medium voltage DC distribution system for integrating BESS with other sources. Independently manage high voltage design packages from concept through commissioning. Coordinate with internal stakeholders and external consultants to align scope, schedule, and budget. Prepare engineering cost estimates and execution schedules in collaboration with project controls. Lead technical reviews and design optimization workshops. Mentor junior engineers and contribute to team development. Develop workflows, templates, and standards for high voltage design and simulation. Support strategic initiatives related to grid integration, renewable energy, and energy storage. Desired Qualifications: Bachelor's or Master's degree in Electrical Engineering from ABET accredited program. Licensed Professional Engineer in Nevada or eligible for reciprocity. Must get their PE in Nevada and South Carolina within 2 months of start date. Minimum 10 years of experience in high voltage electrical design, preferably in EPC environments. Advanced proficiency in: Transmission-level load flow and stability using PSSE and PSLF Electromagnetic Transient Simulations using PSCAD, EMTC or similar SEL Relay Settings using SEL AcSELerator or equivalent Relay coordination and fault studies using ASPEN OneLiner or similar Power system modeling using ETAP, SKM, or similar AutoCAD, Navisworks, Bluebeam, Microsoft Office Preferred proficiency in: Design of HVDC systems and converter station Strong understanding of protection and control systems, SCADA, and substation automation. Highly motivated, proactive, and detail oriented. Ability to communicate effectively through verbal, written, and visual formats. Field experience in construction and commissioning of high voltage systems is highly preferred. The position is full-time. Compensation will be commensurate with experience. We collect personal information (PI) from you in connection with your application for employment with Redwood Materials, including the following categories of PI: identifiers, personal records, professional or employment information, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. If you have additional privacy-related questions, please contact us at privacy@redwoodmaterials.com.

Full-time Description Electrical Designer - Verus Verus is a boutique engineering and technical services firm specializing in industrial automation, controls, SCADA systems, business process engineering and consulting for a wide array of industries. We have expertise in all aspects of systems integration including electrical design, instrumentation, control panel design/build, programming, and commissioning. Since the company's founding in 2015, Verus has grown to a team of 40 engineers with 4 locations in California, Nevada, Idaho and Oregon. We are growing and looking for the right candidate to join our team. Industries Served Power Generation Mining Food and Beverage Oil and Gas Municipal Waste/Wastewater Manufacturing Maritime Hiring Location, Reno, NV Description: Verus is looking for a self-motivated, organized and results-driven mid-senior level Electrical & Controls Designer to join our Reno, NV team. Our clients are important to us and we need someone who enjoys a good challenge, is accountable, well organized and takes pride in driving solutions. The right candidate will bring experience with Electrical and Controls Design, Control Panel design, Instrumentation, and CAD drafting. Experience: Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial purposes. Develop control panel drawings, loop drawings, ladder diagrams, 1-line diagrams, intrinsic circuits, conduit routing and load calculations Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment. Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps. Ensuring compliance with specifications, applicable codes, and customer requirements. Preparing specifications for purchasing of electrical equipment and materials. Requirements 3-8 years of experience in Electrical & Controls Design or Instrumentation Control Panel Design experience. Experience designing control systems. Experience with Instrumentation nice to have. Experience in using CAD software (AutoCAD or ePLan). Experience with drawing standards, drawing review, peer reviews, etc. Degree in electronics, instrumentation, or controls desirable but not required. Knowledge of applicable codes related to the electrical field. Salary Description 75000 - 95000

Gaming: Welcome to the world of land-based gaming. At Light & Wonder, it's all about the games, and our Gaming team builds cutting-edge technology, products, and content for the most iconic casinos and operators across the globe. As a Manager, Electrical Engineer you'll join a dynamic team driving cutting-edge advancements in our land base casino gaming products. Your work will shape the future of Light and Wonders products from concept to production. Reporting to the Sr Director of Development Engineering, you'll collaborate with key teams to make a real impact across the business, in a forward-thinking environment that leads the industry. Job Summary: Designs, develops, modifies and evaluates components and processes used in the generation, manipulation, transmission and storage of electricity. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. Completes documentation and procedures for installation and maintenance. Essential Job Functions: * Design, develop, test electronic components, sub-assemblies, and systems for Casino gaming applications. * Lead and co-ordinate Electrical Engineering development and sustainment. * Coach, mentor, and develop staff members within the Engineering team. * Delegate, schedule, and coordinate workload for projects and team members. * Provide technical leadership on designs, test, and sustainment's efforts. Qualifications Knowledge, Skills and Abilities: * 10+ years' experience in Electrical Hardware Development, Test, and sustainment (full life cycle). * Minimum of 5 years of experience in leading an engineering team. * Proven capability in technical project leadership. * Highly proficient at organizing, scheduling, and coordinating design partner activities and deliverables. * Experience with the full life cycle of electronic systems development (i.e. concept definition, software requirements, working with distributors, selecting parts, developing design requirements, and manufacturing). * Strong knowledge in circuit board design using various ICs, voltage regulators, microcontrollers and processors. * Strong knowledge of various communication protocols such as USB, Ethernet, I2C, SPI, RS-232, RS-485, JTAG, and PCIe. * Possess the fundamental conceptual knowledge of FW interaction with HW. Education: Bachelor's degree required Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, bend, use hands, operate a computer, and have specific vision abilities to include close and distance vision, and ability to adjust focus working with computer and business equipment. Work Conditions: Light & Wonder and its affiliates (collectively, L&W) are engaged in highly regulated gaming businesses. As a result, certain L&W employees may, among other things, be required to obtain a gaming or other license(s), undergo background investigations or security checks, or meet certain standards dictated by law, regulation or contracts. In order to ensure L&W complies with its regulatory and contractual commitments, as a condition to hiring and continuing to employ its employees, L&W requires all of its employees to meet those requirements that are necessary to fulfill their individual roles. As a prerequisite to employment with L&W (to the extent permitted by law), you shall be asked to consent to L&W conducting a due diligence/background investigation on you. This job description should not be interpreted as all-inclusive; it is intended to identify major responsibilities and requirements of the job. The employee in this position may be requested to perform other job-related tasks and responsibilities than those stated above. #LI-JA1 Light & Wonder is an Equal Opportunity Employer and does not discriminate against applicants due to race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. If you'd like more information about your equal employment opportunity rights as an applicant under the law, please click here for EEOC Poster.

Gaming: Welcome to the world of land-based gaming. At Light & Wonder, it's all about the games, and our Gaming team builds cutting-edge technology, products, and content for the most iconic casinos and operators across the globe. As a Manager, Electrical Engineer you'll join a dynamic team driving cutting-edge advancements in our land base casino gaming products. Your work will shape the future of Light and Wonders products from concept to production. Reporting to the Sr Director of Development Engineering, you'll collaborate with key teams to make a real impact across the business, in a forward-thinking environment that leads the industry. Job Summary: Designs, develops, modifies and evaluates components and processes used in the generation, manipulation, transmission and storage of electricity. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. Completes documentation and procedures for installation and maintenance. Essential Job Functions: Design, develop, test electronic components, sub-assemblies, and systems for Casino gaming applications. Lead and co-ordinate Electrical Engineering development and sustainment. Coach, mentor, and develop staff members within the Engineering team. Delegate, schedule, and coordinate workload for projects and team members. Provide technical leadership on designs, test, and sustainment's efforts. Qualifications Knowledge, Skills and Abilities: 10+ years' experience in Electrical Hardware Development, Test, and sustainment (full life cycle). Minimum of 5 years of experience in leading an engineering team. Proven capability in technical project leadership. Highly proficient at organizing, scheduling, and coordinating design partner activities and deliverables. Experience with the full life cycle of electronic systems development (i.e. concept definition, software requirements, working with distributors, selecting parts, developing design requirements, and manufacturing). Strong knowledge in circuit board design using various ICs, voltage regulators, microcontrollers and processors. Strong knowledge of various communication protocols such as USB, Ethernet, I2C, SPI, RS-232, RS-485, JTAG, and PCIe. Possess the fundamental conceptual knowledge of FW interaction with HW. Education: Bachelor's degree required Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, bend, use hands, operate a computer, and have specific vision abilities to include close and distance vision, and ability to adjust focus working with computer and business equipment. Work Conditions: Light & Wonder and its affiliates (collectively, L&W) are engaged in highly regulated gaming businesses. As a result, certain L&W employees may, among other things, be required to obtain a gaming or other license(s), undergo background investigations or security checks, or meet certain standards dictated by law, regulation or contracts. In order to ensure L&W complies with its regulatory and contractual commitments, as a condition to hiring and continuing to employ its employees, L&W requires all of its employees to meet those requirements that are necessary to fulfill their individual roles. As a prerequisite to employment with L&W (to the extent permitted by law), you shall be asked to consent to L&W conducting a due diligence/background investigation on you. This job description should not be interpreted as all-inclusive; it is intended to identify major responsibilities and requirements of the job. The employee in this position may be requested to perform other job-related tasks and responsibilities than those stated above. #LI-JA1 Light & Wonder is an Equal Opportunity Employer and does not discriminate against applicants due to race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. If you'd like more information about your equal employment opportunity rights as an applicant under the law, please click here for EEOC Poster.

Brown and Caldwell (BC) has an exciting opportunity for a Mid-Level Electrical Engineer to join our growing team. Low and Medium Voltage power distribution, Controls, and Instrumentation Design, are services in high demand from our clients. This is an extraordinary opportunity for a mid-level engineer to continue to build upon their engineering career, do challenging and meaningful work, and protect the earth's resources at the same time. Hybrid work from one of our offices in Phoenix, Irvine, Las Vegas, Los Angeles, or San Diego is allowed. Detailed Description: For the right candidate, this position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. The candidate will have a broad range of responsibilities, which includes interacting with clients, leading electrical projects, and participating in new business development. In this role, your primary design delivery responsibilities will include conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and in the field. We are looking for candidates who have a passion for building things, meeting new people, and desire to work with seasoned professionals who perform industrial, municipal, and other water/wastewater related work. Job Responsibilities Expectations: * Serve as a project task manager or perform as lead discipline (electrical and I&C) person on projects as appropriate. * Scope and budget projects, identify method of project execution and coordinate staff assignments. * Successfully manage and execute electrical design and be on time and on budget using company systems and tools. * Support business opportunities and assist in sales and marketing efforts (proposal preparation, interviewing, scope, fee, etc.). * Mentor and possibly supervise other electrical and I&C engineers and designers. * Perform contractor construction submittal reviews and Request For Information (RFI) documents and general electrical design activities for plant and pump station power systems. * Producing effective and accurate written documents, reports, and technical memorandums. * Collaborate with a national team of technical experts in the Electrical and I&C group. * Ability to travel occasionally to project sites and for client meeting both locally and out of Desired Skills and Experience: * BS in Electrical Engineering. * Professional registration. * Minimum of 5 years' experience as an Electrical Engineer working for government, municipal, and/or industrial water and wastewater industries preferred. * Experience in electrical power systems design and specifications, which include service entrance, feeder and branch circuits, lighting, grounding, power distribution and standby power equipment, and associated systems studies and calculations. * Solid knowledge in the application of the National Electrical Code. * Solid knowledge and understanding of electrical safety , NFPA 70E. * Effective oral and written communication. * Able to multi-task, be enthusiastic, be self-motivated, and work independently with a willingness to learn. * Candidate should be a self-starter, results-oriented, take ownership of their work, and be able to work under tight and pressured deadlines from time to time. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: $97,000- $132,000 Location B: $106,000- $145,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

** Who we are: Mark III Construction is growing, and we want you to grow your career with us! Our benefits, competitive compensation, and dedication to training and growth are what keep our employees happy but our work hard and play hard environment is what keeps everyone excited about coming to work every day. Mark III Construction is a commercial and industrial construction company headquartered in Sacramento, California. Founded in 1976, Mark III started as an electrical contractor with a vision to become a multi-trade construction company. Mark III takes a big picture approach to the construction process self-performing electrical, plumbing, processed piping, HVAC, low voltage, underground, pre-fabrication, and MEP design. Instead of multiple consultants and countless sub-contractors, the customer works with just one company to eliminate multiple profit layers and complexity of schedules. With an impressive project history in the industrial, commercial, biotechnology, and food-grade technology industries we are able to perform initial construction, tenant improvements, and remodeling. From construction to service, Mark III has the capabilities to support you from the beginning of your project to preventative maintenance for years after. In addition, our dedicated service team is available for 24/7 emergency service and has the capabilities to perform plumbing, electrical, HVAC, general maintenance repairs, and much more. Mission: Leading the Evolution of Construction Vision: Exposing the World to a New Way to Build Core Values: • Teamwork • Integrity • Excellence • Continuous Improvement • Perseverance Requirements Responsibilities: Assists the Project Manager and Superintendent in overall project coordination Attend and document project meetings Update and maintain project filing system, all sets of drawings, specifications, and logs Review, evaluate, and transmit submittals Prepare complete, accurate and timely submittal logs Prepare and maintain RFI logs, submittal logs and expediting logs Accurately process, distribute, and manage RFIs Cost code and/or verify correct codes on time sheets Ensure Contract Document Logs are maintained and updated as needed Prepare and document extra work orders Review and assemble change order submittals and quantity surveys Compile contract close out documents Prepares project status reports by collecting, analyzing, and summarizing information and trends and recommending actions as needed Development of bid packages to managing schedules Qualifications: Bachelor's degree in relevant field or 2 + years of experience a plus Electrical experience is a plus Must understand the entire construction process from design through project close-out Ability to read and understand plans and specifications Ability to prioritize, complete tasks, and address issues in a timely manner Proficient in Microsoft Office Suite Experience with Procore, Accubid, Bluebeam and scheduling is a plus Ability to work with a team and independently Possess excellent written and verbal skills Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Training & Development Hourly Wage: $70,000 - $115,000 DOE

What does a cell phone in your pocket, a spaceship, and an electric vehicle have in common? Ellsworth Adhesives specs in materials in each of those products! Ellsworth Corporation, a global, industry leading distributor of specialty chemicals and equipment and adhesive manufacturer currently has an Industrial Electrical Engineer Intern opportunity at Ellsworth Adhesives. This role reports into Ellsworth Dispensing Solutions division located in Sparks, NV. Want to continue to grow your career? This is an exciting time to be a part of Ellsworth, come join our team! Ellsworth Dispensing Solutions provides the solutions to make parts. We are the knowledge leader in dispensing solutions. Ellsworth Corporation, a global, industry leading distributor of specialty chemicals and equipment and adhesive manufacturer opportunity at Ellsworth Dispensing Solutions, located in Sparks, NV. Internship Description: Assists in creating electrical drawing packages. Assists with developing new Electrical Manufacturing processes, optimizing current processes, creates and reviews equipment requirements while using problem-solving and continuous implementing continuous improvement actions. Duties/Responsibilities: Creates and maintains the documentation library including electrical schematics, drawings, models, bills of materials, quotes and engineering summaries utilizing CAD Systems and ERP software Prepare and complete accurate product documentation (i.e. manuals, work instructions, assembly instructions, data sheets, etc) Assist in development of capabilities for new and existing machines Conducts assigned projects ensuring that work is completed within budgetary and time constraints while meeting customer and contractual demands Assess customer requirements, evaluate engineering design, and create complete drawing packages Model components to define recommended parts procurement Creates drawings and troubleshoot issues on-site and in the field Collaborates with production, sales, and customers to evaluate the feasibility and technical aspects of project requests - including machine capability and capacity, project cost, tooling and machine requirements, etc. Goals and Expectations of the Intern: Complete 120 hours of work as an intern (8-15 hours per week, 15 weeks total) We are in the process of purchasing solidworks Electrical and this intern will be part of the library build out. Each electrical component will have a model and all meta data created. The student will be adding all terminal info to each part, voltage info, etc. Each project will have a variety of parts that need to be generated. Once the part level is complete they will take these parts build a 3D model and electrical schematic using this tool. Required Qualifications: Must be a degree-seeking undergraduate student at the University of Nevada, Reno during the Spring ‘25 semester Analytical thinking and problem solving Ability to work under pressure and prioritize workload Ability to influence and build strong relationships with cross-functional teams Experience working in multidisciplinary environments Ability to communicate technical concepts to non-technical personnel Detailed oriented Able to identify and recommend Electrical Engineering improvements Preferred Qualifications: Certifications in SolidWorks (i.e. CSWA, CSWP, CSWE, CPPA, etc), preferred Engineering in Training (EIT), preferred Desired Schedule for Intern: In-Person Must be available for 4-hour minimum shifts during operating hours (M-F: 7:30am to 5:30 pm) PIGP internships require interns to complete 120 hours during their internship. It is the intern's responsibility to ensure this requirement is met.

Job Description Electrical Engineer/Power Studies Engineer Location: In office in Reno with with Travel | Full-Time We are seeking a skilled Power Studies Engineer to join our engineering team. In this role, you will use ETAP software to develop electrical models for geothermal and solar power facilities and conduct comprehensive system studies. Your work will include Arc Flash, Short Circuit, and Protection Coordination analyses, ensuring compliance with all relevant safety standards. You will also prepare detailed technical reports and provide recommendations to address any deficiencies found. Key Responsibilities Build detailed electrical models of geothermal and solar power plants using ETAP software. Perform power system studies, including short circuit, protection coordination, and arc flash analyses for both new and existing facilities. Evaluate electrical designs to ensure compliance with applicable safety standards such as the National Electric Code (NEC). Analyze system study results and prepare detailed written reports. Create and install arc flash labeling per NFPA 70E requirements. Follow and enforce all applicable safety procedures (CAPP, OSHA, NFPA 70E). Travel extensively to domestic and international sites to gather field data and apply post-study labeling. Qualifications Bachelor's Degree in Electrical Engineering from an accredited university. 5+ years of experience performing Power System Studies with a focus on arc flash analysis. Proficiency in ETAP or similar electrical system modeling software. Strong understanding of electrical single-line diagrams, three-lines, and schematics. Ability to model electrical components such as generators, transformers, PV modules, and batteries. Experience with AutoCAD preferred. Working knowledge of NEC, NFPA 70E, and IEEE 1584 standards. Ability to interpret Time Current Characteristic (TCC) curves and relay settings. Excellent organizational, analytical, and communication skills. Must hold a valid driver's license and be willing to travel extensively. Professional Engineer (PE) license a plus. Physical Requirements Ability to work in plant operating environments with exposure to noise, heat, cold, and vibration. Must be capable of wearing required safety equipment and performing tasks that involve standing, bending, or kneeling for extended periods. Ability to operate 4WD vehicles safely on highways and dirt roads. Comfortable with computer-based work for long periods. Why Join Us This is an excellent opportunity to contribute to the success of renewable energy projects through detailed power system analysis and safety optimization. You'll work with cutting-edge technology, gain exposure to diverse power generation facilities, and have the chance to make a tangible impact in the growing renewable energy sector. #LI-KI1

Salary: $70,000 - $85,000 + Bonus Potential + Benefits Benefits: Medical, Dental, Vision, Disability, Life Insurance, 401K w/ Match, PTO, Sick Days Job Type: Full-Time Typical Hours: M-F, 9AM-5PM (flexibility for meetings with Taiwan engineering team) Travel: Up to 20% local travel Start Date: ASAP Sponsorship: Not Available Relocation Assistance: Negotiable Electrical Engineer - Display Systems & Gaming Hardware Description Our client in the gaming electronics industry is seeking an Electrical Engineer to join their team in Las Vegas, NV. This hands-on position offers the opportunity to design and develop next-generation display and electronic systems used in gaming and amusement devices. You will play a key role in hardware development, working across analog, digital, and mixed-signal circuitry to bring new products from concept to production. The ideal candidate will be a self-starter who thrives in a fast-paced, collaborative environment and enjoys taking ownership of projects from design through to completion. To succeed in this role, you must be detail-oriented, technically adept, and comfortable working closely with both domestic and international teams. This is an exciting opportunity to join a long-established and forward-thinking company known for its innovation, family-oriented culture, and commitment to employee growth. Electrical Engineer - Display Systems & Gaming Hardware Responsibilities • Design, simulate, and troubleshoot analog, digital, and power circuits • Support product prototyping, validation, and testing (EMC, EMI, etc.) • Liaise with overseas engineers and customers on product requirements • Write specifications, schematics, and hardware test plans • Lead product verification and failure analysis efforts • Collaborate with suppliers to define materials and designs • Present designs and test results in internal and customer reviews • Support high-volume manufacturing and qualification testing • Maintain documentation including schematics and assembly drawings Electrical Engineer - Display Systems & Gaming Hardware Qualifications • Bachelor's degree required • 2+ years of hardware design and development experience required • General proficiency of analog, digital, and mixed-signal circuitry required • Basic product testing and validation experience required • Familiarity with PCB layout software tools required

We Pursue a Higher Standard Coeur Mining is a U.S.-based, well-diversified, growing, precious metals producer with four wholly-owned operations: the Palmarejo gold-silver complex in Mexico, the Rochester silver-gold mine in Nevada, the Kensington gold mine in Alaska and the Wharf gold mine in South Dakota. In addition, the Company wholly-owns the Silvertip silver-zinc-lead exploration project in British Columbia. Coeur Rochester is an open pit, heap leach silver and gold operation. The Rochester mine has the company's distinct position as Coeur's largest expansion investment project in its 95-year history. The expansion project initiated commercial production in Q1 2024 and is currently in ramp-up, targeting a tripling of production rates from historical. Additionally, Rochester has the largest silver reserve asset in the United States. Coeur Rochester has been an integral part of the local community for over 30 years and is committed to supporting its cultural heritage, educational programs, and health and wellness programs. Coeur Rochester employs approximately 430 mine engineers, geologists, front-line operators, exploration, and business leaders. Coeur Rochester prioritizes safety, teamwork, career development, and growth. If you want to grow your career in a progressive, team-oriented environment, apply today. About the Job: Coeur Rochester based near Lovelock, Nevada is seeking an experienced Electrical Supervisor to join our team at the Rochester Mine. Reporting to the Electrical General Foreman, the Electrical Supervisor will coordinate activities of the Electrical Department engaging in maintenance and repair of electric power, lighting, controls, and communication systems of fixed and mobile assets at the Rochester Mine. Responsibilities: Ensure a well-functioning Preventative Maintenance program of the electrical and control systems that drives improving reliability based on the criticality of the equipment. Interprets company policies to workers and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Studies production schedules and estimates worker hour requirements for completion of job assignment. Recommends measures to improve production methods, equipment performance, and quality of product. Be responsive to emergency and/or unplanned high priority repairs, and communicate and coordinate responses and plans with both crusher and process production personnel. Inspects electrical installations for conformance to company specifications and electrical codes. Interprets specifications, blueprints, job orders to workers, and assigns duties. Suggests changes in working conditions and use of equipment to increase efficiency of shop, department, or work crew. Analyzes and resolves work problems, or assists workers in solving work problems. Initiates or suggests plans to motivate workers to achieve work goals. Maintains time and production records. Estimates, requisitions, and inspects materials. Confers with other supervisors to coordinate activities of individual departments. Plans wiring and installation of equipment and fixtures such as motors, generators, switches, circuit breakers, and fuse boxes. Assist with the coordination of selecting of external contractors and vendors and aid in ensuring contract compliance and meeting established timelines for completion. Actively assist in timely follow-up regarding problem areas. Performs activities of workers supervised. Required Qualifications & Skills: Associate's Degree in Electrical Technology program required or equivalent years in position Bachelor's Degree in Electrical Engineering preferred Approximately 5-7 years of experience in an industrial electrical (management and technical) role in a maintenance facility At least 5 years' experience supervising other electricians required Must be current with latest industry regulations and codes relative to electrical systems design and operation; and Recognized and Generally Accepted Good Engineering Practices (RAGAGEP). Experience with CMMS systems, such as SAP, JD Edwards or Oracle, and tracking of best practice maintenance activities. Knowledge of preventive and predictive maintenance programs and standards is required. Demonstrate strategic thinking skill; able to develop and execute long term plans required. Proven oral and written communication and presentation skills Strong computer skills, including the programs of Microsoft Office such as Word, Excel, and Outlook required. Must establish relationships and address conflict through appropriate resolution skills and techniques. Must have full complement of supervisory skills, including project scoping and estimating utilizing work breakdown structures, cost and schedule control, design and construction management, team building, resource planning, procurement, permitting. Must consistently maintain and demonstrate a high regard for environmental compliance, personal safety, as well as the safety of company assets, and employees. Additional Information: Competitive AIP (Bonus structure) Relocation available for certain positions Full benefits on day 1 (medical, vision, dental, employee assistance program, Teladoc service) 6% dollar-for-dollar employer match to 401k or Roth, immediate vesting Flexible schedule Bus service from Lovelock and Winnemucca Travel pay for those outside of bussing service It is the policy of Coeur Mining, Inc. and its direct and indirect United States subsidiaries (the “Company”) to provide equal opportunity employment to all Employees and applicants for employment. No person working at the Company's facilities in the United States is to be discriminated against in employment because of race, religion, color, sex, age, national origin, disability, or veteran status.

Are you a seasoned engineer who thrives on building complex, high-impact applications from scratch? Do you enjoy applying your deep understanding of trading systems to architect resilient, enterprise-grade solutions? Are you excited to collaborate closely with product and design teams in a fast-moving environment where your voice directly shapes the product? If so, we invite you to be a part of our innovative team. As a Staff Software Engineer on Ridgeline's Order Generation team, you'll be at the forefront of developing our Trade Order Management solution-an integral piece of our industry-first cloud platform for investment management. This is an opportunity to influence the design and implementation of a foundational product, working with modern technologies in a collaborative, creative environment. You'll contribute hands-on to product architecture, mentor engineers, and use AI tools like GitHub Copilot and ChatGPT to elevate development velocity, innovation, and code quality. At Ridgeline, how we work matters as much as what we build. Ridgeliners act like owners, choose growth over comfort, and communicate with transparency. We assume positive intent, bias toward action, and bring solutions-not just problems. We celebrate wins, learn from setbacks, and thrive in a resilient, collaborative, high-performing culture. If this excites you, we'd love to meet you. You must be work authorized in the United States without the need for employer sponsorship. The impact you will have: Design and build robust, scalable components for Ridgeline's Trade Order Management product Collaborate cross-functionally with product managers, designers, and engineers to deliver elegant, high-impact solutions Contribute trading domain knowledge and architectural expertise to help shape an innovative platform Leverage AWS cloud services to build secure, high-performance backend infrastructure Mentor engineers through code reviews, pair programming, and informal coaching Establish development best practices and foster a culture of ownership and technical excellence Use AI tools such as GitHub Copilot and ChatGPT to enhance productivity and innovation Think creatively, own problems, seek solutions, and communicate clearly along the way Contribute to a collaborative environment rooted in learning, teaching, and transparency What we look for: 5+ years of experience in software engineering with a strong track record of designing scalable systems 3+ years working with buy-side order management systems Expertise in Java or Kotlin Strong foundation in computer science principles (degree in CS or related field preferred) Experience building in AWS environments (Aurora, Lambda, S3 preferred) Commitment to automated testing and engineering best practices Ability to balance short-term delivery with long-term architectural vision Excellent problem-solving and communication skills Willingness to learn about cutting-edge technologies while cultivating expertise in a business domain/problem space Serious interest in having fun at work Bonus: Experience with agile development methodologies Background in trading, asset management, or financial services software About Ridgeline Ridgeline is the industry cloud platform for investment management. It was founded by visionary tech entrepreneur Dave Duffield (co-founder of both PeopleSoft and Workday) to apply his successful formula of solving operational business challenges with bold innovation and human connectivity to the unique needs of the investment management industry. Ridgeline started with a clean sheet of paper and a deep bench of experts bound by a set of core values and motivated to revolutionize an industry underserved by its current tech offerings. We are building a new, modern platform in the public cloud, purpose-built for the investment management industry and we are prioritizing security, agility, and usability to empower business like never before. With a growing campus in Reno and offices in New York, Lake Tahoe, and the Bay Area, Ridgeline is proud to have built a fast-growing, people-first company that has been recognized by Fast Company as a “Best Workplace for Innovators,” by The Software Report as a “Top 100 Software Company,” and by Forbes as one of “America's Best Startup Employers.” Ridgeline is proud to be a community-minded, discrimination-free equal opportunity workplace. Ridgeline processes the information you submit in connection with your application in accordance with the Ridgeline Applicant Privacy Statement. Please review the Ridgeline Applicant Privacy Statement in full to understand our privacy practices and contact us with any questions. Compensation and Benefits The typical starting salary range for new hires in this role is listed below. In select locations (including, the San Francisco Bay Area, CA, and the New York City Metro Area), an alternate range may apply as specified below. The typical starting salary range for this role is: $174,500-$205,000. The typical starting salary range for this role in the select locations listed above is: $185,000-$220,000. Final compensation amounts are determined by multiple factors, including candidate experience and expertise, and may vary from the amount listed above. As an employee at Ridgeline, you'll have many opportunities for advancement in your career and can make a true impact on the product. In addition to the base salary, 100% of Ridgeline employees can participate in our Company Stock Plan subject to the applicable Stock Option Agreement. We also offer rich benefits that reflect the kind of organization we want to be: one in which our employees feel valued and are inspired to bring their best selves to work. These include unlimited vacation, educational and wellness reimbursements, and $0 cost employee insurance plans. Please check out our Careers page for a more comprehensive overview of our perks and benefits. #LI-Hybrid

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: We're looking for a skilled and driven Electrical, Instrumentation & Controls (EIC) Engineer to join our Plant Engineering team in Reno, NV. This role is critical to supporting our manufacturing operations and advancing our Operations Excellence initiatives. You will play a key role in driving technical excellence across our manufacturing and business operations. This position offers a unique opportunity to lead impactful capital projects, enhance operational reliability. In this role, you will: Operational Technical Support * Act as the go-to expert for electrical systems, controls, and instrumentation. Provide hands-on support to manufacturing operations and maintenance initiatives, serve as the plant's electrical safety specialist, and collaborate with control system specialists to maintain and improve system reliability. * Troubleshoot PLCs, HMIs, instrumentation, OT networks, and electrical control issues. * Provide hands-on support to maintenance and operations during breakdowns and chronic issues. * Act as plant electrical safety champion and ensure compliance with NFPA 70E and internal standards. * Support MES data flow and system reliability: PLC to MES connectivity, loss reason tagging issues, line status mismatches, and basic MES troubleshooting. * Partner with the MES Lead and central OT&EIC on sustaining MES infrastructure, shift handoff issues, and basic configuration fixes. * Support system start-ups, commissioning, and configuration. Capital Project Support * Serve as the electrical engineering lead on cross-functional capital project teams, ensuring safe, efficient, and cost-effective design and implementation. * Lead small to medium automation, controls, and OT infrastructure projects * Support large capital projects as the site EIC lead, ensuring designs meet plant standards and manufacturability requirements. * Manage contractors and vendors during project execution. Feasibility & Improvement Analysis * Conduct electrical engineering feasibility studies for new projects and process improvements, identifying opportunities for innovation, cost savings, and performance enhancements. Engineering & Administrative Leadership * Lead or support various engineering and administrative initiatives, including documentation, compliance, and continuous improvement efforts. * Partner with maintenance and operations to resolve recurring losses and implement permanent corrective actions. * Participate in root cause analysis for automation, instrumentation, and electrical failures. * Identify opportunities for process improvements, standardization, and technology upgrades. Documentation, Standards, and Cybersecurity * Maintain P&IDs, electrical drawings, panel schematics, and change logs. * Apply Clorox engineering and EIC standards and ensure documentation accuracy. * Support basic cyber hygiene: account access control, patching windows, secure configurations, and alignment to central OT&EIC guidance. * Ensure alignment with PLC/HMI/SCADA lifecycle expectations. Cross-Functional & Corporate Collaboration * Work with central OT&EIC on standards, system lifecycle, network architecture, and cyber requirements. * Partner with Ops Excellence, HSE, Quality, and Production on improvements, safety compliance, and process upgrades. * Mentor technicians and junior engineering staff; provide coaching during troubleshooting and project work. Reliability and Continuous Improvement * Partner with maintenance and operations to resolve recurring losses and implement permanent corrective actions. * Participate in root cause analysis for automation, instrumentation, and electrical failures. * Identify opportunities for process improvements, standardization, and technology upgrades. Documentation, Standards, and Cybersecurity * Maintain P&IDs, electrical drawings, panel schematics, and change logs. * Apply Clorox engineering and EIC standards and ensure documentation accuracy. * Support basic cyber hygiene: account access control, patching windows, secure configurations, and alignment to central OT&EIC guidance. * Ensure alignment with PLC/HMI/SCADA lifecycle expectations. Cross-Functional & Corporate Collaboration * Work with central OT&EIC on standards, system lifecycle, network architecture, and cyber requirements. * Partner with Ops Excellence, HSE, Quality, and Production on improvements, safety compliance, and process upgrades. * Mentor technicians and junior engineering staff; provide coaching during troubleshooting and project work. Cross-Functional Leadership * Lead and influence cross-functional project teams, including Process Engineers, Maintenance, Contractors, and external consultants. * Direct the work of outside engineering firms and construction managers during project design and implementation. * Collaborate with: * Operations / Process Improvement Technicians to develop One Point Lessons, Job Aids, and standard work. * Safety Manager to ensure electrical safety compliance. * Quality to ensure repeatable, high-quality output on equipment and processes and complies with all food safety protocols. Technical Expertise * Troubleshoot and repair electrical/control systems using equipment manuals, system drawings, P&IDs, schematics, and blueprints. * Interpret and apply industry, regulatory, and company specifications and standards to projects. * Support system start-up and commissioning, including configuration, wiring, calibration, and power testing. Corporate Collaboration * Interface with corporate engineering to influence design for manufacturability and ensure smooth commissioning of new lines. Budget Responsibility * Develop and manage expense and capital budgets for assigned projects. * Maintain scope, spending, and forecasting within approved budgets. * Typical project budgets range up to $500k, with occasional projects exceeding that amount. #LI-Onsite What we look for: Minimum Qualifications: * Bachelor's degree in electrical/Mechatronics Engineering, or similar with 5 years of professional experience, * Strong emphasis on Allen-Bradley and Siemens control systems. * Solid understanding of electrical systems, instrumentation, and industrial automation. * Experience in project management, budgeting, and procurement. * Self-Starter with "Can Do" Attitude with a demonstrated ability to work with a minimum of supervision * Strong interpersonal, organizational, communication, collaboration, and leadership skills with the ability to interface with various levels in the organization * Attention to Detail * Excellent Attendance * Demonstrated Safety Awareness and Priority * Demonstrated Leadership and Mentoring * Analytical Thinking * Strong technical and troubleshooting skills related to electrical, instrumentation, controls, and power distribution / MCC's / conduit and wiring * Ability to develop, read, and interpret P&IDs and electrical drawings * Working knowledge of NEC, ANSI, IEC, NEMA, NFPA * Hands On - 50% of job is on the floor in the production environment. Desired Qualifications: * Allen Bradley and Siemens PLC Controls Experience * Vision Systems Experience * Robotic Experience (FANUC) * HMI Development Experience * Electrical Power System Maintenance * Mechanical Aptitude * Hydraulic and Pneumatic System Knowledge * Experience in process batch and discrete manufacturing * Working knowledge of data collection systems * Engineering or operations experience with consumer-packaged goods packaging equipment and systems preferred * Food Manufacturing Experience Preferred Workplace type: Onsite 5 days a week Our values-based culture connects to our purpose and empowers people to be their best, professionally and personally. We serve a diverse consumer base which is why we believe teams that reflect our consumers bring fresh perspectives, drive innovation, and help us stay attuned to the world around us. That's why we foster an inclusive culture where every person can feel respected, valued, and fully able to participate, and ultimately able to thrive. Learn more. [U.S.]Additional Information: At Clorox, we champion people to be well and thrive, starting with our own people. To help make this possible, we offer comprehensive, competitive benefits that prioritize all aspects of wellbeing and provide flexibility for our teammates' unique needs. This includes robust health plans, a market-leading 401(k) program with a company match, flexible time off benefits (including half-day summer Fridays depending on location), inclusive fertility/adoption benefits, and more. We are committed to fair and equitable pay and are transparent with current and future teammates about our full salary ranges. We use broad salary ranges that reflect the competitive market for similar jobs, provide sufficient opportunity for growth as you gain experience and expand responsibilities, while also allowing for differentiation based on performance. Based on the breadth of our ranges, most new hires will start at Clorox in the first half of the applicable range. Your starting pay will depend on job-related factors, including relevant skills, knowledge, experience and location. The applicable salary range for every role in the U.S. is based on your work location and is aligned to one of three zones according to the cost of labor in your area. -Zone A: $88,700 - $165,900 -Zone B: $81,300 - $152,100 -Zone C: $73,900 - $138,300 All ranges are subject to change in the future. Your recruiter can share more about the specific salary range for your location during the hiring process. This job is also eligible for participation in Clorox's incentive plans, subject to the terms of the applicable plan documents and policies. Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. JOB SUMMARY - ESSENTIAL FUNCTIONS/DUTIES Under general supervision of a senior-level engineer, an Engineer II performs a variety of engineering tasks in design, development, manufacturing, testing, installation, integration, sustainment, operations, and maintenance of software, electronic, and/or mechanical equipment and systems. Work will involve some evaluation, originality, or ingenuity and is generally performed as a member of a development, sustainment, or operations and maintenance team. Employee will be responsible for the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Performs various radar-engineering tasks (Antenna Theory, Microwave Engineering, Signal Processing, Control Systems, Computer, Communications, etc.) with established deadlines, that are somewhat difficult in nature. Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Conduct laboratory investigations on equipment or systems, using computer-assisted test methods Assist in preparation of reports, correspondence, or technical studies Study currently approved standards, codes, and procedures applied to the engineering specialty Keep informed of currently approved standards, codes, and procedures applied to engineering specialty Prepare, deliver, and submit technical presentations for in-process design and review meetings Perform other job-related duties, as required DESIRED QUALIFICATIONS The incumbent will possess a technical understanding of Radar/RF Engineering and control systems. REQUIREMENTS - EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor of Science in engineering from an ABET-accredited academic institution and two years of related engineering experience or an accredited Master of Science in engineering are required for this position. In addition, an Engineer II must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles Familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Working knowledge of computer systems and computer-based engineering tools Planning/organizational skills and the ability to work under deadlines BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards. Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required. Travel to remote company work locations may be required. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17; JCORP12

Redwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Founded in 2019, we're delivering low-cost and large-scale energy storage and producing battery materials in the U.S. for the first time, all from batteries we already have. Staff BESS Electrical Engineer, EPC Redwood Materials is seeking a Battery Energy Storage Systems (BESS) Electrical Engineer to join our EPC team. This role is central to the design of scalable, high-performance energy storage infrastructure for utility-scale and distributed applications. Our mission is to build a sustainable circular economy for lithium-ion batteries by transforming recycled materials into high-quality inputs for new batteries. Responsibilities will include: Lead electrical engineering efforts for utility scale lithium-ion BESS projects from concept (system sizing, layout) through construction. Interface with utilities and ISO/RTOs to support interconnection studies/submittals, permitting, and compliance for new renewable and BESS projects. Serve as the internal subject matter expert (SME) for technical challenges related to BESS. Design AC and DC electrical systems for BESS using medium voltage transformers, inverters, DC combiners, energy managers, and battery modules. Specify and procure long-lead AC equipment. Develop schematic diagrams, single-line diagrams, wiring schematics, raceway plans, grounding plans, and protection strategies for AC and DC systems. Specify and evaluate components such as circuit breakers, contactors, fuses, disconnects, emergency power off (EPO), and metering devices. Coordinate with civil, structural, fire & life safety, SCADA/telecom, geotechnical, and DC system design teams to produce complete IFC packages and technical specifications. Ensure designs comply with applicable codes and standards such as NEC 705, NEC 706, IEEE 1547, UL 9540, NFPA 855, and local amendments. Lead code reviews and provide summary to internal teams. Integration of BESS with grid infrastructure and other renewable and traditional energy sources. Perform power system studies for short circuit, load flow, arc flash, and protective device coordination for AC and DC systems. Serve as the Electrical Engineer of Record for assigned projects. Maintain up-to-date knowledge of BESS technologies, codes, and industry trends. Lead R&D efforts to perform feasibility analysis of using medium voltage DC distribution system for integrating BESS with other sources. Provide CA support for RFIs, submittal reviews, change orders, and site inspections. Coordinate with internal stakeholders and external consultants to track scope, schedule, and budget. Prepare engineering cost estimates and project schedules in collaboration with project controls at various design milestones. Perform QA/QC reviews of electrical designs and mentor junior engineers. Contribute to internal design standards, templates, and best practices. Manage project workload and ensure timely delivery of engineering documents. Support strategic initiatives related to grid integration, renewable energy, and energy storage. Desired Qualifications: Bachelor's or Master's degree in Electrical Engineering from ABET accredited program. Licensed Professional Engineer in Nevada or eligible for reciprocity. Must get their PE in Nevada and South Carolina within 2 months of start date. Minimum 5 years of experience in solar, energy storage, or microgrid sectors, with at least 3 years focused on BESS design and deployment. Proven expertise in interconnection and regulatory compliance for BESS systems. SME in knowledge of NEC 705, NEC 706, IEEE 1547, UL 9540, and NFPA 855. Advanced proficiency in: Microgrid and hybrid power systems modeling tools using HOMER or similar Power system modeling using ETAP, SKM, or similar AutoCAD/Revit, Navisworks, Bluebeam, Microsoft Office Preferred proficiency in: Transmission-level load flow and stability using PSSE and PSLF Electromagnetic Transient Simulations using PSCAD, EMTC or similar SEL Relay Settings using SEL AcSELerator or equivalent Design of HVDC systems and converter station Strong understanding of energy storage use-cases including peak shaving, load shifting, demand response, and frequency response. Highly motivated, proactive, and detail oriented. Ability to communicate effectively through verbal, written, and visual formats. The position is full-time. Compensation will be commensurate with experience. We collect personal information (PI) from you in connection with your application for employment with Redwood Materials, including the following categories of PI: identifiers, personal records, professional or employment information, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. If you have additional privacy-related questions, please contact us at privacy@redwoodmaterials.com.

Job DescriptionDescription: Electrical Designer - Verus Verus is a boutique engineering and technical services firm specializing in industrial automation, controls, SCADA systems, business process engineering and consulting for a wide array of industries. We have expertise in all aspects of systems integration including electrical design, instrumentation, control panel design/build, programming, and commissioning. Since the company's founding in 2015, Verus has grown to a team of 40 engineers with 4 locations in California, Nevada, Idaho and Oregon. We are growing and looking for the right candidate to join our team. Industries Served Power Generation Mining Food and Beverage Oil and Gas Municipal Waste/Wastewater Manufacturing Maritime Hiring Location, Reno, NV Description: Verus is looking for a self-motivated, organized and results-driven mid-senior level Electrical & Controls Designer to join our Reno, NV team. Our clients are important to us and we need someone who enjoys a good challenge, is accountable, well organized and takes pride in driving solutions. The right candidate will bring experience with Electrical and Controls Design, Control Panel design, Instrumentation, and CAD drafting. Experience: Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial purposes. Develop control panel drawings, loop drawings, ladder diagrams, 1-line diagrams, intrinsic circuits, conduit routing and load calculations Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment. Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps. Ensuring compliance with specifications, applicable codes, and customer requirements. Preparing specifications for purchasing of electrical equipment and materials. Requirements: 3-8 years of experience in Electrical & Controls Design or Instrumentation Control Panel Design experience. Experience designing control systems. Experience with Instrumentation nice to have. Experience in using CAD software (AutoCAD or ePLan). Experience with drawing standards, drawing review, peer reviews, etc. Degree in electronics, instrumentation, or controls desirable but not required. Knowledge of applicable codes related to the electrical field.

Job Description ** Who we are: Mark III Construction is growing, and we want you to grow your career with us! Our benefits, competitive compensation, and dedication to training and growth are what keep our employees happy but our work hard and play hard environment is what keeps everyone excited about coming to work every day. Mark III Construction is a commercial and industrial construction company headquartered in Sacramento, California. Founded in 1976, Mark III started as an electrical contractor with a vision to become a multi-trade construction company. Mark III takes a big picture approach to the construction process self-performing electrical, plumbing, processed piping, HVAC, low voltage, underground, pre-fabrication, and MEP design. Instead of multiple consultants and countless sub-contractors, the customer works with just one company to eliminate multiple profit layers and complexity of schedules. With an impressive project history in the industrial, commercial, biotechnology, and food-grade technology industries we are able to perform initial construction, tenant improvements, and remodeling. From construction to service, Mark III has the capabilities to support you from the beginning of your project to preventative maintenance for years after. In addition, our dedicated service team is available for 24/7 emergency service and has the capabilities to perform plumbing, electrical, HVAC, general maintenance repairs, and much more. Mission: Leading the Evolution of Construction Vision: Exposing the World to a New Way to Build Core Values: • Teamwork • Integrity • Excellence • Continuous Improvement • Perseverance Requirements Responsibilities: Assists the Project Manager and Superintendent in overall project coordination Attend and document project meetings Update and maintain project filing system, all sets of drawings, specifications, and logs Review, evaluate, and transmit submittals Prepare complete, accurate and timely submittal logs Prepare and maintain RFI logs, submittal logs and expediting logs Accurately process, distribute, and manage RFIs Cost code and/or verify correct codes on time sheets Ensure Contract Document Logs are maintained and updated as needed Prepare and document extra work orders Review and assemble change order submittals and quantity surveys Compile contract close out documents Prepares project status reports by collecting, analyzing, and summarizing information and trends and recommending actions as needed Development of bid packages to managing schedules Qualifications: Bachelor's degree in relevant field or 2 + years of experience a plus Electrical experience is a plus Must understand the entire construction process from design through project close-out Ability to read and understand plans and specifications Ability to prioritize, complete tasks, and address issues in a timely manner Proficient in Microsoft Office Suite Experience with Procore, Accubid, Bluebeam and scheduling is a plus Ability to work with a team and independently Possess excellent written and verbal skills Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Training & Development Salary: $70,000 - $115,000 DOE

Are you an engineering leader who thrives on architecting game-changing software from the ground up? Do you enjoy empowering teams to push technical boundaries and deliver high-impact solutions in a collaborative, fast-paced environment? Are you excited to leverage your deep trading systems experience to shape the future of financial technology? If so, we invite you to be a part of our innovative team. As a Staff Engineer on the Trading team at Ridgeline, you will provide hands-on technical leadership and design expertise to create and scale our Trade Order Management solution. You'll guide cross-functional teams to deliver complex, high-performance applications using modern cloud-native architectures. With access to cutting-edge technologies-including AI tools like Cursor, GitHub Copilot, and ChatGPT-you'll help define and deliver an industry-defining platform that transforms how investment management firms operate. Your vision, mentorship, and ability to connect the dots across systems will make a meaningful impact on our team and customers alike. At Ridgeline, how we work matters as much as what we build. Ridgeliners act like owners, choose growth over comfort, and communicate with transparency. We assume positive intent, bias toward action, and bring solutions-not just problems. We celebrate wins, learn from setbacks, and thrive in a resilient, collaborative, high-performing culture. If this excites you, we'd love to meet you. You must be work authorized in the United States without the need for employer sponsorship. The impact you will have: Design scalable, cloud-native applications using AWS and modern backend services to power mission-critical trading workflows Architect systems that are secure, performant, and maintainable while aligning with Ridgeline's long-term product vision Lead by example in engineering best practices, including design reviews, testing strategy, and CI/CD adoption Guide and mentor teams of engineers across disciplines, fostering a culture of ownership, continuous learning, and technical excellence Partner closely with product, design, and QA to deliver features that delight customers and meet real-world trading needs Contribute to a collaborative environment rooted in transparency, feedback, and shared responsibility Leverage AI tools like Copilot and ChatGPT to streamline development, improve code quality, and boost team productivity Actively participate in strategic technical decisions, roadmap planning, and evolving the team's architecture and tooling What we look for: 7+ years of software engineering experience, including leading large-scale system design and implementation Strong programming experience in Java or Kotlin (preferred), with an emphasis on backend systems Deep understanding of object-oriented design principles, design patterns, and test-driven development Experience with cloud platforms, ideally AWS, and modern development practices like infrastructure as code and CI/CD pipelines Familiarity with modern front-end technologies (e.g., React, TypeScript) and willingness to contribute to full-stack solutions Ability to think strategically, own complex problems, and balance short-term goals with long-term architecture Strong communication skills and the ability to influence technical direction across teams Serious interest in having fun at work Bonus: Experience building or scaling buy-side order management systems Familiarity with FIX and/or SWIFT protocols Background in financial instruments or mathematics Exposure to performance-sensitive or real-time distributed systems About Ridgeline Ridgeline is the first front-to-back system of record for investment managers. Founded by visionary entrepreneur Dave Duffield (co-founder of both PeopleSoft and Workday), the company was created to modernize an industry held back by outdated, disconnected technology. Powered by a single, real-time data set and embedded AI, Ridgeline helps firms automate complexity, accelerate collaboration, and deliver tailored client experiences at scale, without added headcount or risk. Ridgeline is headquartered in Lake Tahoe, with offices in New York, Reno, and the Bay Area, and is recognized by Fast Company as a “Best Workplace for Innovators,” by Frost & Sullivan as a “Technology Innovation Leader,” and by The Software Report as a “Top 100 Software Company.” Ridgeline is proud to be a community-minded, discrimination-free equal opportunity workplace. Ridgeline processes the information you submit in connection with your application in accordance with the Ridgeline Applicant Privacy Statement. Please review the Ridgeline Applicant Privacy Statement in full to understand our privacy practices and contact us with any questions. Compensation and Benefits The typical starting salary range for new hires in this role is listed below. In select locations (including, the San Francisco Bay Area, CA, and the New York City Metro Area), an alternate range may apply as specified below. The typical starting salary range for this role is: $174,500-$205,000. The typical starting salary range for this role in the select locations listed above is: $185,000-$220,000. Final compensation amounts are determined by multiple factors, including candidate experience and expertise, and may vary from the amount listed above. As an employee at Ridgeline, you'll have many opportunities for advancement in your career and can make a true impact on the product. In addition to the base salary, 100% of Ridgeline employees can participate in our Company Stock Plan subject to the applicable Stock Option Agreement. We also offer rich benefits that reflect the kind of organization we want to be: one in which our employees feel valued and are inspired to bring their best selves to work. These include unlimited vacation, educational and wellness reimbursements, and $0 cost employee insurance plans. Please check out our Careers page for a more comprehensive overview of our perks and benefits. #LI-Hybrid #LI-Onsite