Senior electrical engineer jobs in Pflugerville, TX - 1,114 jobs

Job title: Electrical & Controls Engineer Job Type: Full Time We are seeking a highly skilled Electrical & Controls Engineer to support the design, development, testing, and scaling of advanced hardware systems. This role is integral to building complex mechatronic equipment that incorporates plasma processing, metal vapor deposition, and high-power laser technologies. The ideal candidate brings deep technical expertise across electrical systems and control architectures and thrives in a hands-on, multidisciplinary engineering environment. Key Responsibilities Collaborate with multidisciplinary engineering teams to design, test, and deliver electrical and control hardware, control system software, data acquisition, and instrumentation for complex mechatronic systems Design and implement system safety features, including interlocks, fault detection, and protection mechanisms Develop and maintain PLC-based control programs for automated test stands and system-level data acquisition Define facility-level electrical requirements, including load calculations, power conditioning, and power quality analysis Specify, integrate, and oversee installation of critical power components, such as transformers, switchgear, and power distribution systems Ensure engineering rigor through design reviews, FMEAs, risk assessments, and mitigation plans Partner with lab engineers and scientists to define controls architecture and process automation requirements Architect electrical enclosures and control panels for safe and reliable distribution of power to motors, instrumentation, and controllers Support system debugging, validation, and continuous improvement during development and scale-up Required Qualifications Hands-on experience in electrical system design, automation, and control systems within a highly technical industry (e.g., aerospace, nuclear, automotive, semiconductor processing, or national laboratories) Experience designing, testing, troubleshooting, and debugging electronics hardware and test software Hands-on experience with LabVIEW and NI hardware platforms (CompactDAQ, CompactRIO, PXI) Bachelor's or master's degree in electrical engineering, Computer Engineering, or a closely related field from an accredited institution Strong written and verbal communication skills, with the ability to document designs and collaborate effectively across disciplines Ability and willingness to work on-site in Austin, TX Ability to comply with export control regulations related to controlled technical information

- PLM Systems Design Engineer Job descriptions: • Bachelor's degree in Industrial Engineering, or related field (Manufacturing, Mechanical, Electrical, etc.) • 5-7+ years of experience of leading global supply chain initiatives improving processes in the electronics industry - design, sourcing, manufacturing, logistics, fulfillment, after-sale service • Hands on experience in Siemens Teamcenter. • Deep PLM and Operations / Supply Chain process experience and be self-directed, motivated, and comfortable working in an extremely fast-paced environment • Technical proficiency in PLM enterprise software, integration technologies, and data platforms • Extensive experience in global supply chain management specific to New Product Introduction (NPI) at a global scale • Comprehensive knowledge of how PLM data is used across enterprise, manufacturing, and supply chain processes. Ability to identify uses cases where improved data will bring significant benefit to teams, mobilize POC's, and scale rapid solutions. • Hands on experience working with PLM data across the enterprise translating how data enables business processes and recommend process efficiency improvements resulting from data processing improvements and realize the benefit • Strong analytical, project management and leadership skills to handle a variety of activities and complexities spanning the organization and be willing to work at both a very detailed and strategic level • The ability to facilitate global projects and to align business and technical teams • Exceptional communication skills, verbal, written and presentation to easily communicate complex technical concepts to executive leadership • Solid ability to personally deliver large scale global initiatives under pressure, with high levels of complexity and ambiguity. • Identify build strong business cases for the Data Foundation use cases. Assist in the mobilization of POC's and projects to mobilize the use cases.

Title: Sr. Project Engineer - Metals Responsible Manager: Team Manager - Project Engineering Hybrid We, EOS - world market leader for industrial 3D printing, are looking for you to support our Additive Minds Team as a Sr. Project Engineer - Metals. This role will support and execute internal and external engineering projects to maximize impact and drive the adoption of additive manufacturing. Your Mission •Lead and manage engineering projects related to metal additive manufacturing process chain, to ensure timely delivery, adherence to scope, and budget compliance. •Advise customers from both technical and economic perspectives to deliver the optimal engineering solution within a comprehensive production strategy. •Collaborate with cross-functional teams, including service, sales, and product and software development to innovate EOS products and processes. •Provide technical support to internal teams and external customers, including troubleshooting and problem-solving for EOS' systems and processes. •Conduct benchmarking and feasibility studies to evaluate new materials, hardware features, and processes for metal additive manufacturing. •Actively drive knowledge management through proper documentation and internal knowledge transfer. •Stay updated with the latest advancements in metal additive manufacturing and contribute to continuous improvement initiatives. •Identify clients requiring additional support and coordinate assistance through Additive Minds services and consulting projects. •Prepare build files and operate EOS metal machines. •Participate in thought leadership initiatives, such as writing whitepapers, publishing technical articles, delivering presentations, and representing the company at trade shows. Your Talents •Master's or bachelor's degree in aerospace, mechanical, manufacturing, industrial engineering, or related field. •Project management experience •At least 4 years of experience in laser powder bed additive manufacturing technologies. • A strong background in Additive Manufacturing applications, including build layout design, part orientation, support strategies, and post-processing techniques. • Experience with EOS metal platforms is preferred. • Experience with root cause analysis and documentation • Background in engineering or support roles within metal material manufacturing techniques. • Proficiency in software such as Magics, Netfabb (or similar), SolidWorks, and MS Office. • Strong written and verbal communication skills in English. • Willingness to travel for business purposes Our Vision Over 1000 sharp minds, about 60 nationalities, one goal: accelerating the world's transition to Responsible Manufacturing. Our proven technology, industrial 3D printing, has been extending the boundaries of manufacturing for over 30 years. We work globally networked and prefer to think outside the box and we're looking for people who want to shape the future with us. EOS welcomes individuals from all backgrounds, ensuring equal opportunities without regard to race, color, religion, national origin, gender identity, expression, sexual orientation, age, or disability. At EOS, equity and inclusion are fundamental principles, and we believe in creating a work environment that is built on empathy, respect, and fairness.

We are seeking a highly skilled GPU Verification Engineer to join our GPU Team. Required Skills and Qualifications: 10+ years of experience with a Bachelor's degree in Computer Science/Computer Engineering/relevant technical field. Lead GPU top-level ASIC verification Strong expertise in SystemVerilog, C, and C++ Develop verification strategy, test plans, testbenches, and tests Drive regression debug and coverage closure Experience with industry-standard verification and debug tools GPU end-to-end knowledge and Vulkan driver experience are a plus

Job Posting Start Date 12-11-2025 Job Posting End DateFlex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary team who build great products and contribute to our growth, we're looking to add an Controls Manager located in Austin,Tx. Reporting to the Director, Operations Engineering the Controls Manager is responsible for leading a team of controls engineers in the design, development, and implementation of automated control systems for machinery and processes. This role combines technical expertise with leadership responsibilities, ensuring projects are delivered on time. The position requires strong knowledge of PLCs, HMIs, SCADA systems, and industrial automation technologies, as well as the ability to mentor and guide team members. What a typical day looks like: Leadership & Team Management Lead and mentor a team of controls engineers, providing technical guidance and career development. Allocate resources, assign tasks, and monitor progress to ensure timely project delivery. Foster a collaborative and innovative team environment. Project Management Plan and direct controls-related project responsibilities from concept through commissioning. Develop project scopes, budgets, schedules, and risk assessments. Ensure compliance with organizational standards and industry regulations. Technical Expertise Design, develop, and implement control systems including PLC programming, HMI development, and SCADA integration. Oversee system simulations, testing, and debugging to ensure functionality and reliability. Stay current with emerging automation technologies and implement best practices. Customer & Stakeholder Interaction Participate in technical discussions with clients and internal teams. Provide training and support for customers and maintenance staff. Prepare documentation, including operating instructions and system specifications. The experience we're looking to add to our team: Education: Bachelor's or Master's degree in Electrical Engineering, Automation, or related field. Experience: 7+ years in controls engineering, with at least 2 years in a leadership role. Technical Skills: Proficiency in PLC programming (Allen-Bradley, Siemens, Beckhoff, etc.). Experience with HMI/SCADA systems and industrial networks (Ethernet/IP, Modbus, Profibus). Knowledge of safety standards (ANSI, IEC, NFPA). Knowledge of working in a GAMP/GxP environment. Soft Skills: Strong leadership, communication, and problem-solving abilities. Ability to manage multiple projects and prioritize tasks effectively. Preferred Certifications Professional Engineer (PE) license or equivalent. Functional Safety Certification (TÜV or similar) KR13 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction EngineeringRelocation: Eligible for domestic relocation only Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

The Substation Engineer 4 is a senior-level technical leader responsible for the design, construction, and oversight of complex substation and electrical power system projects. This role leads large, high-impact initiatives from concept through construction, performs advanced system studies and protection analysis, and serves as a subject-matter expert for regulatory compliance. The position provides technical guidance and mentorship to other engineers, coordinates with internal and external stakeholders, and applies sound engineering judgment to deliver safe, reliable, and cost-effective substation solutions aligned with long-term strategic objectives. Job Function Compile, evaluate, and analyze engineering design and test data. Utilize computer-assisted engineering and design software to perform detailed engineering analysis. Prepare and review technical specifications, drawings, test reports, and construction documents. Perform detailed engineering calculations to establish construction, installation, and operational standards. Design, implement, maintain, and improve electrical instruments, equipment, facilities, and systems. Manage and oversee large substation projects to ensure delivery on time and within budget. Coordinate with consultants, developers, customers, and government entities. Conduct construction inspections and resolve material and design issues. Perform fault studies and set protective relays for transformers, feeders, and transmission lines. Prepare conceptual design documents and support equipment procurement. Represent the organization in regulatory compliance efforts. Provide leadership and mentoring to less experienced engineers. Perform additional duties as assigned. Education and Experience Bachelor's degree in a related engineering field. Registered Professional Engineer (PE) in the State of Texas. Minimum of eight (8) years of related engineering experience. Valid driver's license. Qualifications Proficiency in substation design and construction. Knowledge of power system materials and NERC PRC standards. Ability to read and develop engineering schematics and drawings. Experience with AutoCAD and ASPEN. Strong project management and organizational skills. Excellent verbal and written communication abilities. Ability to analyze problems and make sound engineering decisions. Benefits Competitive base pay within a defined salary range. KPI-based bonus opportunities. Competitive benefits package. Appealing Facts About Living in Johnson City or the Leander / Cedar Park Area (TX) Johnson City offers a small-town atmosphere with scenic Hill Country landscapes. Leander and Cedar Park provide convenient access to the Austin metro area. Lower cost of living compared to many major Texas cities. Abundant outdoor recreation, parks, and lakes. Strong regional economy with diverse dining and cultural attractions. By completing an application, you give us permission to send you text messages regarding this position and future opportunities. You can opt out at any time. Global Talent Resources, Inc. (GTR) is a power industry recruiting firm specializing in substation, transmission, and distribution careers. With 15+ years of experience, we connect engineering and leadership professionals to top roles with leading utilities, cooperatives, EPCs, and consulting firms nationwide. Many opportunities aren't listed publicly. Contact the GTR team for insider access, expert guidance, and the next step in your electric utility career.

Field Layout Engineer-Prism Electric, Inc. Prism Electric, Inc. is one of the most successful open-shop electrical contracting companies in Texas with expanding opportunities and growth in the Oklahoma market. Garland based Prism Electric has expertise with projects in virtually every field of electrical construction - design/build services, industrial and commercial developments as well as government and institutional projects. Prism Electric possesses world-class technical experts who maintain vital, long-term relationships and a high level of credibility with general contractors and other customers we serve. We have a strong reputation and extensive network of customer relationships and have consistently provided new, cutting-edge product innovations. Job Details: The successful Field Layout Engineer will be responsible to provide layout for location and elevation of conduit stubs, sleeves, lights, foundations, columns, walls, embedded items, slab-on-grade, supported decks and structures, and other such items. This individual will also need to complete as-builts of duct banks as well as using advanced technologies to provide surveying services related to the construction drawings. The ideal candidate will be proficient in the use of Robotic Total Station hardware and software and would likely have some form of AutoCAD or Revit experience. Responsibilities: Responsibilities of this position include, but are not limited to the following: Verify the accuracy of measurements and calculations conducted at the construction site. Coordinate control points & work and schedules with project team, General Contractor & Subcontractors Review drawings and layouts for accuracy of measurements etc... Effectively communicate with BIM Team, Project Superintendent's, Project Managers and Field personnel. Work closely with Operations Management on the request of resources required to meet project schedule. Promote total quality and customer satisfaction by acting as liaison between customer and field management to ensure that project work is completed per customer expectations. Other duties as assigned.

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: Join the implant team and be part of an elite team of engineers working on high-performance, safety-critical embedded systems for the next-generation brain-computer interfaces. We are looking for experienced, hands-on engineers who are interested in exploring what's possible in highly power and latency-constrained environments. We are looking for an experienced, hands-on electrical engineer for implant electronics board design, integration with our custom chips, design verification, manufacturing, and quality control. You will own advanced projects, not only working on incremental changes, and be an integral member of a small, fast-moving team. You will be working on all phases of board design (part selection, schematic design, layout, and bring-up) as well as work closely with chip designers, firmware engineers, mechanical and manufacturing engineers, and microfabrication experts for system integration. Job Responsibilities: * Utilize electrical engineering fundamentals and best system design practices to deliver high-performant, reliable, and manufacturable extremely size-constraint systems * Contribute to all phases of system and board design, from system definition to part selection, schematic design, layout, bring up, and design verification * Help conduct R&D investigations and experiments to demonstrate feasibility of new technology for the implant and the charger * Work cross functionally to ensure successful systems integration * Contribute to system improvements that decrease latency and increase battery life, reliability, and safety * Design and deploy systems for implant-charger hardware in the loop testing, and manufacturing line quality control Note: The team is hiring electrical engineers at all levels, both junior and senior. What matters most is evidence of exceptional abilities and a drive to succeed. Required Qualifications: * Bachelor's degree in Electrical Engineering or equivalent experience * Strong EE fundamentals * Minimum of 2 years of experience designing PCBs for low power and size constrained applications, including internships * Fluency with PCB CAD tools (Altium, Eagle, KiCad, Allegro) * Experience with sensors, power management, and signal/power integrity * Experience with wireless systems (BLE, WIFI, Zigbee) * Experience building and bringing-up MCUs or FPGA * Comfortable with common communication protocols (SPI, UART, I2C, etc.) * Comfortable with lab equipment (oscilloscope, VNA, etc.) * Basic C and Python programming skills Preferred Qualifications: * Experience with firmware development for embedded systems (C/C++) * Proficiency with ME CAD tools (Solidworks, AutoCAD) * Experience with FEM/FDTD simulation tools and antenna designs/testing * Experience with analog circuit design * Experience in the design and testing of wearable electronic devices (watches, fitness trackers, wireless headphones, etc.) Expected Compensation: The anticipated base salary for this position is expected to be within the following range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. We also believe in aligning our employees' success with the company's long-term growth. As such, in addition to base salary, Neuralink offers equity compensation (in the form of Restricted Stock Units (RSU)) for all full-time employees. Base Salary Range: $109,800-$238,100 USD What We Offer: Full-time employees are eligible for the following benefits listed below. * An opportunity to change the world and work with some of the smartest and most talented experts from different fields * Growth potential; we rapidly advance team members who have an outsized impact * Excellent medical, dental, and vision insurance through a PPO plan * Paid holidays * Commuter benefits * Meals provided * Equity (RSUs) *Temporary Employees & Interns excluded * 401(k) plan *Interns initially excluded until they work 1,000 hours * Parental leave *Temporary Employees & Interns excluded * Flexible time off *Temporary Employees & Interns excluded

Job Description Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Manufacturing Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge manufacturing processes for high-reliability, high-volume satellites, we would like to hear from you. In this position, you will be responsible for the establishing the manufacturing of Cesium's NPI satellite platform. Responsibilities will include assist in the establishment of the NPI facility by contributing to layout design, equipment selection, and workflow optimization tailored for satellite production. Support the transition of prototypes to full-scale production by collaborating with design and engineering teams.Develop and implement quality control procedures and inspection protocols to ensure compliance with industry standards and specifications for satellite manufacturing. Conduct root cause analysis and implement corrective actions for manufacturing defects in electronics and mechanical components. Be a manufacturing representative to outside CM's and help ensure timely delivery, quality of external hardware. Your work will have a direct impact on the success of the company. You will work closely with the engineering team, program management to ensure the successful build and launch of our satellite.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS A Bachelor of Science (BS) in Mechanical, Electrical, or Manufacturing Engineering with a minimum of 6 years of industry experience. Experience with Design for Manufacturability (DFM) of electronics hardware. Knowledge of industry standards such as IPC-A-610 and J-STD-001. Knowledge of mechanical assembly, CNC machining Experience with change management, nonconformance documentation, root cause analysis, corrective action systems, and acceptance criteria. Experience with cost analysis, managing suppliers, and configuration management. Excellent written and verbal communication skills. Experience working in an NPI Environment Ability to establish scalable manufacturing processes. PREFERRED EXPERIENCE Experience in aerospace or other high-reliability industries. Proficiency with PLM and ERP software. Proficiency in AS9100/ISO9001 quality management system requirements. Experience successfully tackling multiple high-priority tasks. Working with national cross functional teams CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. **Meet the Team** Open-minded, driven, diverse and very creative people at Cisco design the hardware that makes the internet work. Bring your knowledge of computers and networking and take it to a new level in any one of the following product categories including: cloud, social, mobile/wireless, video, VoIP, large data, collaboration, web, Internet of Things, routing, switching, IPv6, data center, HPC, Telepresence and many more. Your work will impact billions globally. **Your Impact** Impact the product development from the lowest levels of circuit design to large system design and see your contribution all the way through to large volume manufacturing. **Creative Hardware Engineering positions available in:** + ASIC Design and Verification + System/Board Design + Circuit Board Layout + Hardware Automation, Validation and Test + Signal Integrity + Power Design **Minimum Qualifications** + Currently enrolled in a PhD program in Computer Science, Artificial Intelligence, Machine Learning, or a related field in Computer Science, Electrical Engineering, Computer Engineering, Applied Science, Material Engineering, Applied Physics, Math, Physics or related major + Proficient experience in hardware engineering areas such as ASIC Design and Verification, System/Board Design, Circuit Board Layout, Hardware Automation, Validation and Test, Signal Integrity, and Power Design. + Foundational understanding of hardware engineering principles, including experience with hardware design and tools (e.g., Altium, Cadence, Mentor Graphics) and simulation software. + Familiarity with hardware testing and debugging techniques using lab equipment such as oscilloscopes, logic analyzers, and multimeters. **Preferred Qualifications** + Ability to lead multiple tasks, prioritize effectively, and work toward both short- and long-term goals. + Experience building and maintaining positive working relationships within diverse and extended teams. + Excellent written and verbal communication skills. + Proven ability to work collaboratively across business groups and teams (hardware, software, manufacturing, etc.). + Exposure to scripting or programming languages (e.g., Python, MATLAB, C/C++) for test automation or data analysis. **Why Cisco?** At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. **Message to applicants applying to work in the U.S. and/or Canada:** Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: + 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees + 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco + Non-exempt employees** receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees + Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) + 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next + Additional paid time away may be requested to deal with critical or emergency issues for family members + Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: + .75% of incentive target for each 1% of revenue attainment up to 50% of quota; + 1.5% of incentive target for each 1% of attainment between 50% and 75%; + 1% of incentive target for each 1% of attainment between 75% and 100%; and + Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $44,000.00 - $185,000.00 Non-Metro New York state & Washington state: $44,000.00 - $185,000.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. ** Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements. Cisco is an Affirmative Action and Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, genetic information, age, disability, veteran status, or any other legally protected basis. Cisco will consider for employment, on a case by case basis, qualified applicants with arrest and conviction records.

Job Description At TerraFirma, we're redefining how the world moves earth for construction. Founded by former SpaceX engineers and backed by Bain Capital Ventures, TerraFirma is automating construction to make it faster, cheaper, and safer. Our Story & Mission At SpaceX, we were part of the teams that built the largest rocket in human history, launched the largest constellation of satellites ever made, and delivered connectivity to millions of people worldwide. What we learned was simple: infrastructure is everything. At Starbase, the biggest barrier to launching missions to Mars was not building the rocket. It was how slow, expensive, and complex it was to build the infrastructure around it. We lacked buildings, roads, water, power, communications, and waste management, and constructing them took far more time and resources than it should have. From a first-principles perspective, that doesn't make sense. It shouldn't be this hard or costly to create the foundations for progress. That's when we realized something important: the same engineering mindset that enabled us to tackle space exploration and mass manufacturing could be applied to infrastructure. By bringing the principles of simplification, iteration, acceleration, and automation to construction, we can unlock a new era in how the world builds. Accelerating infrastructure unlocks progress across every domain, creating a self-sustaining engine for tackling humanity's toughest challenges. The innovations we develop on Earth will lay the groundwork for the technologies that one day make settlement on Mars possible. Job Overview You will design and maintain the electrical systems that enable reliable remote operation of construction equipment. This includes wiring harnesses, circuits, and system integration for drive-by-wire machines in rugged outdoor environments. The role is hands-on, spanning fabrication, lab and field troubleshooting, and vendor collaboration to streamline builds. Responsibilities Design wiring harnesses, circuits, and systems to enable safe and reliable control of drive-by-wire machinery in high vibration, dirty, outdoor environments Develop and maintain working relationships with manufacturers to streamline production and manufacturing of designs Assemble and install harnessing and circuits for development testing and use in an operational environment out in the field Use measurement equipment to troubleshoot electrical systems on the bench and in the field. Use the tools available to implement immediate fixes and develop sustainable long-term solutions Eliminate uncertainty through the use of effective documentation practices and facilitate collaboration and future development Basic Qualifications B.S. in Electrical Engineering Practical experience working on electrical systems Preferred Skills & Experience Experience building wiring harnesses and assembling circuit boards (preferably to industry or other recognized standards) Experience using electrical measuring equipment (oscilloscope, multimeter, signal analyzer, etc.) Experience designing and qualifying systems for high vibration and/or outdoor environments Strong understanding of "fail-safe" design principles Additional Requirements Comfortable with working in a fast-paced startup environment Must be willing to relocate to Austin, TX if not within commuting distance Must be willing to work extended hours or weekends when needed to support critical deadlines Compensation & Benefits Base compensation will vary based on factors such as relevant experience and education. Salaries and leveling will be determined on a case-by-case basis if an offer is extended. Our total compensation package also includes equity in TerraFirma. Relocation packages are available to help cover moving costs, if applicable.

Collaborate across multidisciplinary teams to meet sensing and autonomy requirements, while supporting design, testing, and manufacturing phases. Ensure structural integrity and compliance with industry standards. Responsibilities + Work closely with the software and opto-mechanical teams to understand and meet hardware requirements. + Familiarize yourself with sensors and sensor requirements, focusing on structural design. + Investigate and reference applicable standards to inform requirements. + Integrate individual components such as radar systems, lidar systems, and communication systems into autonomous vessels. + Position radar systems to meet the requirements of autonomy and perception. + Conduct shock and vibration tolerance analysis. + Focus on integration development for the entire vehicle, not on sensor development. + Take ownership of the integration process and support manufacturing and production. Essential Skills + 5 years of experience in structural design, mechanical engineering, and design engineering. + Proficiency in CAD modeling and creating CAD drawings. + Experience in the integration of radar, LIDAR, antenna, and satellite communication systems. + Ability to collaborate across multidisciplinary teams, including software, electrical, and autonomy teams. + Understanding of design cycles and documentation standards. Additional Skills & Qualifications + Clearance eligibility required + Familiarity with RF systems and supporting full product lifecycle, including manufacturing. + Ability to work in ambiguous environments and define own requirements. Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $70.00 - $100.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

+ Designer is required to ensure timely and efficient project completions that will achieve customer objectives. This person will work with the Design / Engineering team, internal/external, and various customers in order to develop accurate design drawings suitable for construction. + Develop conceptual & detailed designs by analyzing equipment / vendor specifications, customer requirements, & existing designs. + Work with multiple customers and Facilities personnel. + Support engineering evaluations (working with Engineering System Owners). + Maintain utility database. + Field Work (As-Builts, etc.). + Follow Design & Cad best practices. + Maintain confidential information. + Follow and comply with all safety regulations. **Basic Qualifications (Required Skills/Experience):** + Must be proficient in AutoCad 2019 or newer (which includes knowledge of X'refs). + Must be skilled in electrical (circuits, wire sizing, etc) design. + Must be able to read / understand PI&D's. + Must be able to adapt existing products and processes in unique ways to solve customer problems. + Must be able to help create solutions to customer problems. + Must be proficient in the use of common office software such as Microsoft Word and Excel. + Must take ownership of his / her projects. + Must be able to multi-task while maintaining project deadlines. + Must be self-motivated. **Preferred Qualifications (Desired Skills/Experience):** + Knowledge of Semiconductor industry / Tool Hook-up is a plus **Education:** + Associates or high school diploma with equivalent experience. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Thank you!

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe are seeking a Perception Hardware Engineer to join a team that will integrate and develop the sensing and perception systems that power autonomy on our unmanned surface vessels. In this role, you will integrate and develop perception components such as radar, camera, LiDAR, GPS, and other sensors to build robust situational awareness in maritime environments into a cohesive, high performing system. This is a hands-on, high-impact role for an engineer who thrives on solving real-world problems in complex, noisy domains and wants to shape the future of naval autonomy.Responsibilities: Serves as the technical expert on perceptionhardware and their integration on Saronic's products Collaborates in a multi-disciplinary team of expert engineers that specialize in perception system design, analysis, build and test Works closely with mechanical, optical, electrical, software, and manufacturing engineering teams to define requirements and plans for validation methods for Saronic's perception system Ensures technical requirements are satisfied and product deadlines are met Creates and presents detailed design reviews of perceptionhardware development and integration Develops and implements analysis and testing methods for new products and their subcomponents Grows and maintain vendor relationships for various perception sensors Designs perception calibration fixtures and tooling to aid high rate production Provides manufacturing support for trouble shooting and resolving perception hardware issues Qualifications: Required Bachelor's degree or greater in Mechanical Engineering, Robotics, Electrical Engineering, or a related field. 2+ years designing complex mechanical and electrical systems Strong engineering fundamentals Hands-on design, analysis, and testing of sensors and structures Proficiency with 3D CAD software (Siemens NX/Unigraphics preferred) Experience with engineering trade studies, tolerance stack up analysis, hand calculations, finite element analysis and testing of integrated systems Ability to obtain and maintain a security clearance Preferred Experience with maritime autonomy challenges such as dynamic environments, variable lighting, and low-contrast targets. Proven success developing, integrating, and validating optical & sensor systems on maritime or aerospace platforms Experience with design and testing for shock and vibration environments Prior experience working on DoD programs or unmanned maritime systems. A professional engineering license or similar professional certification Benefits: Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands: Prolonged periods of sitting at a desk and working on a computer. Occasional standing and walking within the office. Manual dexterity to operate a computer keyboard, mouse, and other office equipment. Visual acuity to read screens, documents, and reports. Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies. Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Automation & Controls Engineer Essential Duties and Responsibilities To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. Design, implement, and optimize automation solutions, including advanced conveyor and pick-and-place systems and precision material handling. Support the engineering of automation and controls on new and existing equipment. Integrate a wide range of controls components such as PLCs and/or SCADA systems, motion controllers, machine vision systems, heater controllers, web edge guiding and steering mechanisms, pneumatic actuators, encoders, force sensors, thermocouples, analog devices, and various location, distance, and material presence sensors. Support electrical control box engineering, standards compliance, assembly, modification, and documentation upkeep. Develop, deploy, and maintain revision control of electrical and software changes on large tool sets where the hardware and software must be copied exactly. Develop and execute test plans to verify machine functionality and reliability. Provide timely and accurate project status, documentation, and training. Troubleshoot down equipment, including finding the root cause of failures and engineering solutions to correct them. Work closely with equipment vendors throughout all phases of a project's development on controls and software requirements and related issues. Support factory expansion efforts, including vendor acceptance testing, equipment commissioning and process qualification. Live the company culture of integrity, teamwork, self-discipline and professional competence Minimum Qualifications (Knowledge, Skills and Abilities): The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience/Education: BS in Mechanical Engineering, Electrical Engineering, Mechatronics, or similar educational background; 3+ years of hands-on experience in Automation & Controls Engineering or similar field Knowledge/Skills/Abilities: Advanced control system engineering and programming of complex process tools and automation primarily using Beckhoff, Mitsubishi, and Omron PLC's, Windows and Linux PC's, C#, Python and SQL. Expert level troubleshooting of all facets of automated systems. Knowledge of manufacturing executions systems including direct experience integrating equipment data streams into factory information databases. Advanced knowledge of process control and implementation of real time data acquisition. Must be a self-starter with the ability to multi-task in a fast-paced environment. Ability to communicate effectively, both orally and in writing. Ability to influence others and collaboratively gain consensus using supportive data. Ability and willingness to work hands-on. Ability to travel 10%. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Working Conditions/Hours: Salaried Exempt Physical Demands - Office and Manufacturing Environment While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or finger, handle, or feel objects, tools or controls. The employee is required to stand, walk, sit, reach with hands and arms and pull/push; climb or balance; and stoop, kneel, crouch, or crawl. The employee must lift and/or move up to 50 pounds without assistance. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. Work Environment - Includes both a typical office environment, with minimal exposure to excessive noise or adverse environmental issues, and a shop environment, with exposure to high noise levels from operating machines, physical hazards from moving equipment and machine parts, nuisance dust, and skin exposure to chemicals used to run/maintain machines PPE- May be required to wear Personal Protective Equipment, including but not limited to safety glasses, safety shoes, bump-caps, gloves, hair nets, masks, & clean-room frocks while adhering to the prescribed safety procedures We believe diversity and inclusion among our teammates are essential to our success. We celebrate diversity and are committed to creating an inclusive environment for all employees while building teams that represent a variety of backgrounds, perspectives, and skills. We are an equal opportunity employer. All employment is decided based on qualifications, merit, and business needs. CelLink participates in the E-Verify program in specific locations as required by law. CelLink was founded in 2012 and entered volume production in 2018. CelLink provides electrical systems to the world's leading EV manufacturers, traditional automotive OEMs, and tiered suppliers. The company has raised approximately $315M in funding through private investment and multiple grants from the US Department of Energy. CelLink's investors include 3M, Atreides, BMW, BorgWarner, Bosch, D1 Capital, Fidelity, Fontinalis Partners, Ford, Franklin Templeton, Lear, Park West, SK Telecom, Standard Investments, T. Rowe Price, Tinicum, and Whale Rock .

The reputation of Dell Technologies for delivering award-winning hardware is legendary and our Hardware Engineering team is at the heart of it. We design and develop analogue as well as digital hardware products - not just computer or network hardware devices but peripherals too. Recognized for our high level of technical expertise in a variety of engineering disciplines, we're involved across the development lifecycle - from research to the building, testing and delivery of completed products. Innovators in our field, we lead the way in exploring new concepts, approaches, processes, materials and components. Join us to do the best work of your career and make a profound social impact as a Senior Principal Engineer on our Hardware Engineering Team in Hopkinton, Massachusetts or Austin, Texas. What you'll achieve As a Hardware Engineer, you'll deliver enterprise class hardware, made up of a wide range of cutting-edge technologies, to dozens of product lines and thousands of customers. You'll be exposed to all aspects of hardware and systems engineering working closely with firmware, mechanical, power and thermal engineers. You'll work in a fast-paced environment with a team of highly skilled engineers providing both support and guidance. It is a team fueled by collaboration and a company deeply committed to integrity and responsibility. You will: * Provide technical leadership to a project team developing cutting edge server and storage solutions, including AI servers used for training the leading AI models * Be responsible for delivering a project architecture and concept for servers and storage, which will then be handed over to a development team as well as work with Product Management and Marketing to fine-tune requirements * Work on feasibility studies, defining architecture, SI constraints, electronic computer-aided design (ECAD) and mechanical computer-aided design (MCAD) guidance and documenting key risks * Author and coordinate the creation of concept specifications and design guides * Possess excellent communication skills for requirements discussions as well as provide technology updates to multiple Dell EMC product groups and development teams Essential Requirements: * Strong background in electrical or computer engineering and an understanding of server architecture * Experience in hardware design, analysis and debug of complex printed circuit boards (PCBAs) along with an understanding of the power, mechanical and thermal constraints. * Must have experience designing PCBAs utilizing PCIe Gen 4 or higher technology (or equivalent high speed serial design experience) * Exposure to working with global teams including Original Design Manufacturer (ODM)/Joint Design Manufacturer (JDM) partners * Experience working in cross-functional engineering teams Desirable Requirements: * Typically requires 5 to 12+ years of related experience in a professional role with a Bachelor's degree; or 8+ years with a Master's degree; or 5+ years with a PhD; or equivalent experience * Experience using simulation to design PCBAs Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member - right now at MyWellatDell.com. Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Manufacturing Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge manufacturing processes for high-reliability, high-volume satellites, we would like to hear from you. In this position, you will be responsible for the manufacturing of Cesium's diverse array of electronic assemblies for satellites and other aerospace platforms. Cesium partners with contract manufacturers (CMs) to fabricate and assemble our products; as such, you will serve as Cesium's in-house expert and primary point-of-contact for our CMs. Day-to-day responsibilities range from highly technical manufacturing analysis and design - such as choosing solder chemistries and root-causing non-compliances - to administrative functions like supplier review and process documentation. Your work will have a direct impact on the success of the company. You will work closely with the engineering team, program management, and external contract manufacturers to industrialize space products for a growing market that combines the rigor of space with the scale of commercial electronics.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS A Bachelor of Science (BS) in Mechanical, Electrical, Industrial, or Manufacturing Engineering with a minimum of 4 years of industry experience. Experience with Design for Manufacturability (DFM) of electronics hardware. Knowledge of industry standards such as IPC-A-610 and J-STD-001. Experience with change management, nonconformance documentation, root cause analysis, corrective action systems, and acceptance criteria. Experience with cost analysis, managing suppliers, and configuration management. Excellent written and verbal communication skills. PREFERRED EXPERIENCE Statistical process control. Experience in aerospace or other high-reliability industries. Proficiency with PLM and ERP software. Proficiency in AS9100/ISO9001 quality management system requirements. Proficiency in lean manufacturing methodologies. Experience successfully tackling multiple high-priority tasks. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

At TerraFirma, we're redefining how the world moves earth for construction. Founded by former SpaceX engineers and backed by Bain Capital Ventures, TerraFirma is automating construction to make it faster, cheaper, and safer. Our Story & Mission At SpaceX, we were part of the teams that built the largest rocket in human history, launched the largest constellation of satellites ever made, and delivered connectivity to millions of people worldwide. What we learned was simple: infrastructure is everything. At Starbase, the biggest barrier to launching missions to Mars was not building the rocket. It was how slow, expensive, and complex it was to build the infrastructure around it. We lacked buildings, roads, water, power, communications, and waste management, and constructing them took far more time and resources than it should have. From a first-principles perspective, that doesn't make sense. It shouldn't be this hard or costly to create the foundations for progress. That's when we realized something important: the same engineering mindset that enabled us to tackle space exploration and mass manufacturing could be applied to infrastructure. By bringing the principles of simplification, iteration, acceleration, and automation to construction, we can unlock a new era in how the world builds. Accelerating infrastructure unlocks progress across every domain, creating a self-sustaining engine for tackling humanity's toughest challenges. The innovations we develop on Earth will lay the groundwork for the technologies that one day make settlement on Mars possible. Job Overview You will design and maintain the electrical systems that enable reliable remote operation of construction equipment. This includes wiring harnesses, circuits, and system integration for drive-by-wire machines in rugged outdoor environments. The role is hands-on, spanning fabrication, lab and field troubleshooting, and vendor collaboration to streamline builds. Responsibilities Design wiring harnesses, circuits, and systems to enable safe and reliable control of drive-by-wire machinery in high vibration, dirty, outdoor environments Develop and maintain working relationships with manufacturers to streamline production and manufacturing of designs Assemble and install harnessing and circuits for development testing and use in an operational environment out in the field Use measurement equipment to troubleshoot electrical systems on the bench and in the field. Use the tools available to implement immediate fixes and develop sustainable long-term solutions Eliminate uncertainty through the use of effective documentation practices and facilitate collaboration and future development Basic Qualifications B.S. in Electrical Engineering Practical experience working on electrical systems Preferred Skills & Experience Experience building wiring harnesses and assembling circuit boards (preferably to industry or other recognized standards) Experience using electrical measuring equipment (oscilloscope, multimeter, signal analyzer, etc.) Experience designing and qualifying systems for high vibration and/or outdoor environments Strong understanding of "fail-safe" design principles Additional Requirements Comfortable with working in a fast-paced startup environment Must be willing to relocate to Austin, TX if not within commuting distance Must be willing to work extended hours or weekends when needed to support critical deadlines Compensation & Benefits Base compensation will vary based on factors such as relevant experience and education. Salaries and leveling will be determined on a case-by-case basis if an offer is extended. Our total compensation package also includes equity in TerraFirma. Relocation packages are available to help cover moving costs, if applicable.

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Meet the Team Engineering: Open-minded, driven, diverse and deeply creative people at Cisco design the hardware that makes the internet work. Bring your knowledge of computers and networking and take it to a new level in any one of the following product categories including: cloud, social, mobile/wireless, video, VoIP, big data, collaboration, web, Internet of Things, routing, switching, IPv6, data center, HPC, Telepresence and many more. Your work will affect billions globally. Supply Chain Operations: Collaborate with peers on projects that have a real-world impact. From our processes to manufacturing, you'll deliver a standout customer experience of Cisco products and services. Take your innovative ideas from the drawing board to deliver powerful solutions. You'll collaborate with multi-functional teams to determine our infrastructural needs and product specifications. Your Impact You will change the product development from the lowest levels of circuit design to large system design and see your contribution all the way through to high volume manufacturing. Creative Hardware Engineering positions available in: * ASIC Design and Verification * System/Board Design * Circuit Board Layout * Hardware Automation, Validation and Test * Signal Integrity * Power Design Minimum Qualifications * Completion within the past 3 years, or current enrollment with expected completion within 12 months, of a Bachelor's degree program. Relevant fields include Electrical Engineering, Computer Engineering, Mechanical Engineering, a related program, or holders of equivalent academic certifications. * Familiarity with hardware description languages (e.g., Verilog, VHDL) and/or PCB design tools (e.g., Altium, Cadence, Mentor Graphics). * Foundational knowledge of embedded systems and microcontrollers. * Familiarity with scripting or programming languages (e.g., Python, MATLAB, C/C++) for automating test or data analysis tasks. * Able to legally live and work in the country for which you're applying, without visa support or sponsorship Preferred Qualifications * Experience with hardware prototyping (e.g., breadboards, FPGAs, Arduino, Raspberry Pi, or similar platforms). * Familiarity with signal and power integrity concepts and tools. * Exposure to hardware validation and debugging in a team or project setting. * Experience with simulation tools (e.g., SPICE, HyperLynx, HFSS) for circuit analysis or electromagnetic modeling. * Experience working in multi-functional teams (e.g., collaborating with software, manufacturing, or mechanical engineers). Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: * 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees * 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco * Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees * Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) * 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next * Additional paid time away may be requested to deal with critical or emergency issues for family members * Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: * .75% of incentive target for each 1% of revenue attainment up to 50% of quota; * 1.5% of incentive target for each 1% of attainment between 50% and 75%; * 1% of incentive target for each 1% of attainment between 75% and 100%; and * Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $94,200.00 - $137,500.00 Non-Metro New York state & Washington state: $84,000.00 - $122,200.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements.