Senior electro-mechanical technician full time jobs - 51 jobs

Job Description Pay: $30-$40 per hour Sign-On Bonus $2,000 for qualified candidates Schedule: Full-time, year-round work American Residential Services is the largest provider of residential services in the US, employing more than 7000 professionals across the country. Rescue Rooter of Cleveland is looking for an experienced Boiler Specialist/ Mechanical Technician to join our team. We currently service multiple nursing homes, apartment buildings, restaurants, manufacturing, hospitals & institutions. Up to $2,000 Sign-On Bonus for qualified candidates. Check out what we offer: Access to insurance available at 31 days of employment Low-cost Medical Insurance options, starting at $5 per week Dental and Vision Insurance options Health Savings Account or Flexible Spending Account 401(k) with company match HSA and Flexible Spending Account Paid Time Off & Holiday Pay Company paid life insurance Learn more by visiting ********************* Responsibilities Service & installation of commercial domestic hot water systems including but not limited to; Commercial water heaters Commercial domestic boilers, holding tanks & controls. Tankless water heaters & combo units. Circulating pumps Service & installation of commercial heating/cooling systems including but not limited to; Hot water & steam heating boilers. Forced air & air conditioning units. Heat pumps. Chilling towers. 3 years' experience in commercial HVAC Strong knowledge of electrical systems. CFC Certified Ability to read commercial wiring schematics. Ability to lift 50 lbs independently and use power & hand tools. Work in outside conditions and in tight spaces. Use of ladders for roof access. Qualifications 5 years' experience in Boiler Repair Strong knowledge of electrical systems. CFC Certified Ability to read commercial wiring schematics. Ability to lift 50 lbs independently and use power & hand tools. Work in outside conditions and in tight spaces. Use of ladders for roof access. If you are interested in joining our team, please apply today! All candidates are required to undergo a pre-employment drug screen and background checks. ARS-Rescue Rooter is an Equal Opportunity Employer AA/EOE/M/F/V/D. In compliance with the Americans with Disabilities Act, ARS-Rescue Rooter may provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss. *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. American Residential Services provides equal employment opportunities to all individuals, both applicants and employees, without regard to race, color, religion, pregnancy, gender, marital status, national origin or ancestry, citizenship status, disability, medical condition, genetic characteristics or genetic information, age, military service or veteran status, or any other characteristic protected by applicable federal, state, or local laws prohibiting discrimination. For more information about how we collect and use personal information, see our privacy policy here: ***********************************

About Lubrizol The Lubrizol Corporation, a Berkshire Hathaway company, is a specialty chemical company whose science delivers sustainable solutions to advance mobility, improve wellbeing and enhance modern life. Founded in 1928, Lubrizol owns and operates more than 100 manufacturing facilities, sales, and technical offices around the world and has about 8,000 employees. For more information, visit ***************** We value diversity in professional backgrounds and life experiences. By enabling a consistent, unbiased, and transparent recruitment process, Lubrizol seeks to create a positive experience for candidates so we can get to know them at their best. We recognize unique work and life situations and offer flexibility, ensuring our employees feel engaged and fulfilled in every aspect of life. Job Location: Wickliffe, OH Job type: Full-time, 40 hours/week Type of role: Onsite Shift Opening: 2nd or 3rd Shift Shifts: 2nd shift (2:30pm - 12:30am) * Tuesday - Friday and every 3rd weekend. * Overtime is based on workload needs but not guaranteed. 3rd shift (12am - 10am) * Tuesday - Friday and every 3rd weekend. * Overtime is based on workload needs but not guaranteed. Join Our Thriving Team at Lubrizol as Mechanical Test Technician - Automotive Unleash Your Potential. At Lubrizol we're transforming the lubricants and oil industry and looking for exceptional talent to join us on this journey. If you are ready to join an international company with talent around the world, and want to make a real impact, we want you on our team. What Will Be Your Environment: The Wickliffe testing facility is part of our Global Headquarters campus, just outside of Cleveland, OH. We are a team of almost 100 people in Mechanical Testing, including about 45 Technicians and Supervisors. You'll collaborate with a diverse group of passionate individuals to deliver sustainable solutions to advance mobility, improve wellbeing, and enhance modern life. What You'll Do: The Mechanical Testing Department for The Lubrizol Corporation supports the development and testing of current and future advanced mobility needs for the lubricant industry and beyond. A team member is responsible for the operation of a variety of tests in Mechanical Testing including, but not limited to, gasoline engines, heavy duty diesel engines, axles, and transmissions. What We're Looking For: * Mechanically inclined individuals with a passion for working on and testing engines, components, and related equipment. * Operate and perform daily work in a safe manner. * Control and troubleshoot problems related to the automotive and mechanical test laboratory equipment and test stands. * Perform mechanical and maintenance functions on test stands and associated equipment. * Communicate testing related issues to the appropriate engineer, facilitator, or support group. * Stay current on lab utilities that support your test area. * Maintain housekeeping in test cells/areas and common spaces. * Be an active participant in completing shift rounds. * Complete training needed to develop technical and interpersonal skills. * Cross train in other areas of Mechanical Testing for personal growth and support of future testing needs. * Support all Lubrizol and department initiatives around Safety, Environmental, ISO, ERT and career development. * Prioritize work for overall effectiveness of shift and to meet business needs. * Identify and communicate the need for emergency maintenance coverage. * Procure test parts and support equipment and ensure they are charged to the proper accounts. * Recommend new test support equipment as needed. * Always maintain high ethical standards. * Demonstrate good initiative, communication skills, and self-motivation. * Demonstrate the Lubrizol Purpose, Strategy, and Values in everyday work Skills That Make a Difference: * High school diploma, GED, or equivalent. * Experience through work or education performing automotive and/or mechanical equipment testing, including vocational training, hobbies, or military exposure. * Demonstrate mechanical acumen and familiarity with standard engine / driveline nomenclature. * Ability to use hand tools and specialized measurement equipment such as torque wrenches and micrometers. * Good basic math skills. * Competence in Microsoft Office (Outlook, Word, and Excel). * Ability to document testing data and issues clearly. * Ability to wear appropriate PPE (Personal Protective Equipment) to fulfill safety requirements. * Coordinate vacation to ensure the best coverage for Mechanical Testing. * Accepts the possibility of flexible work schedules. * Ability to lift 5-50 lbs. and assisted moves of drums weighing 50-800 lbs. * Ability to stand for long periods of time. * Work in an environment that is not climate controlled. Job has requirements that may expose you to outdoor elements. Perks and Rewards That Inspire: * On-the-job training provided * Tools, uniforms, and PPE provided * Competitive salary with performance-based bonus plans * 401k Match plus Age Weighted Defined Contribution * Competitive medical, dental and vision offerings * Health Savings Account * Paid Holidays, Vacation, Parental Leave Ready for your next career step? Apply today and let's shape the future together! It's an exciting time to be part of Lubrizol. Lubrizol is not staying put. We are continually learning and evolving. Our passion delivers our success - not only for Lubrizol but for those who count on us every day: our employees, customers and communities. We work with a relentless commitment to operate safely and responsibly, keeping safety, sustainability, ethics, and compliance at the forefront of everything we do. The well-being of our employees, customers and communities is paramount to our culture and in the way we approach our work. As a diverse, global team, we work together to solve some of the world's most pressing challenges. We impact everyday lives through science only Lubrizol can deliver, and we never stop pushing to do it better. One of the founding principles of The Lubrizol Corporation more than 90 years ago was treating every employee with dignity and respect. That same commitment is only stronger today. More than that, we are committed to providing an environment where every employee can be the best they can be, no matter their race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic. #LBZUS

Electrical Engineering Technician \- 1st shift Pay type: Hourly NTN Driveshaft, a world leader in constant velocity technology for the automotive industry, is seeking a qualified Electrical Engineering Technician for our Columbus, Indiana operations. NTN currently has 2000 employees in our Columbus operation, and customer demand for our product is growing rapidly. NTN Driveshaft manufactures Constant Velocity Joints (CVJs) for all major automotive companies. These customers include Honda, Ford, Toyota, GM, Chrysler, and most other automotive OEMs. NTN offers career growth opportunities, a stable work environment, a comprehensive benefits package with industry\-leading low employee contributions, a 401k retirement plan, customizable additional benefits, PTO, tuition reimbursement, holiday pay, and more! ESSENTIAL DUTIES AND RESPONSIBILITIES: · Determining the equipment control systems, data acquisition systems, vision systems, and the sequence of operations necessary to perform production and assembly operations. · Develop new processes and equipment technology and implement projects for new product designs, enhance existing process technology, to improve quality and reduce manufacturing cost. · Support product and application engineering with process\-related issues. · Evaluate electrical systems, products, components, and applications by designing and researching programs and applying knowledge of electricity and materials. · Confirm system and program capabilities through testing methods. · Develop electrical products by studying customer requirements, researching and testing manufacturing and assembly methods and materials. · Develop and modify manufacturing processes by designing and modifying equipment for processing and assembling components, soliciting operator observations. · Assure product quality through testing finished products and system capabilities. · Contribute to team effort by accomplishing related results as needed. · Work Environment - The workday is split between the air\-conditioned manufacturing floor and the office. Requirements REQUIRED KNOWLEDGE, SKILLS, EDUCATION, AND ABILITIES: · BS or associate in electrical engineering technology or a relevant engineering\-based field. · Experience with PLC Systems and Programmable Logic Controllers, such as Allen Bradley, Omron, Mitsubishi, Vision (Keyence, Cognex), and\/or robotics (Motoman, Fanuc). · Experience troubleshooting electrical and mechanical systems. · Ability to read and interpret drawings (Electrical, Mechanical, Hydraulic and Pneumatic) · Must be able to work overtime, Saturdays and\/or Sundays (alternating weekends), and holidays if required. · Knowledge and skills in MS Office applications and Software (AutoCAD Electrical, Office, SQL) · Excellent communication skills (verbal and written) and computer skills. · Ability to operate man\-lifts. · Setup and climb ladders. · Ability to grasp and manipulate small objects such as screws, wire terminals, etc. · Knowledge of electrical tools, precision measuring equipment, electronic test equipment, along with various other tools common to this trade. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667294733","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Columbus"},{"field Label":"State\/Province","uitype":1,"value":"Indiana"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"47201"}],"header Name":"Electrical Engineering Technician","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:18758749","is JobBoard":"false","user Id":"4**********1692017","attach Arr":[],"awli ApiKey":"86ezhi1yg2oktx","custom Template":"3","awli HashKey":"c21b16e3c8dbe9654eb55b1f04069e032f82ad795ed0d938a82d7a8b1ca864815181c3fd0ea2122651ca831fe2cd08c59b4cc13fab90a137f970094f6e24aea3","is CandidateLoginEnabled":true,"job Id":"4**********2198005","FontSize":"12","location":"Columbus","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"pcy573a2da6bcad414975813a806bd9435355"}

Are you the type of person who enjoys providing a high-level of customer service? Then, Spitzer Chevrolet of North Canton wants YOU, as we continue to build a team of dedicated professionals striving to learn, grow and achieve more! The Technician is responsible for identifying necessary vehicle service and performing the repair, service, and/or maintenance work. While you take care of our customers, we will take care of you! FULL-TIME BENEFITS: Flexible work schedule - 5 day work week! Chevrolet product training and ongoing training with Spitzer University Opportunities for advancement - we love to promote from within the organization! 401K with a 5% employer match Medical, dental, and vision insurance Generous paid time off - 80 hours after 1 year of service Paid uniforms Employee assistance program Voluntary benefits include: life insurance, short and long-term disability, accident coverage, hospital indemnity, company-paid life insurance with medical coverage and HSA with employer contribution ESSENTIAL DUTIES AND RESPONSIBILITIES: Examines customer vehicles and identifies necessary vehicle repairs and maintenance Estimates cost of repairs Performs vehicle repairs and maintenance, request necessary parts and documents services performed Performs services efficiently and according to dealership guidelines Follows dealership and manufacturer service guidelines and safety rules and regulations Other related duties as assigned

BU2 Thermal and Fluid System Today, MAHLE is one of the world's leading original equipment manufacturers, developing and producing cooling and air conditioning systems, as well as complete thermal management solutions for a wide range of applications-from passenger cars and commercial vehicles to off-highway mobile and stationary machinery. Further, to increase efficiency, extend service life, and reduce emissions, MAHLE manufactures filters, pump systems as well as oil coolers for engine and transmission applications. These technologies ensure clean air and prevent contamination in oil and fuel systems-critical not only for combustion engines but also for reliable operation of fuel cell systems. Your Contribution The Electro Mechanical Technician (EMT) is a member of the plant maintenance team that supports factory operations by maintaining, troubleshooting, and repairing electrical and mechanical equipment. Your Experience & Qualifications * Perform electrical and mechanical system preventative maintenance, troubleshooting, and repair in a team environment * Perform corrective, preventive maintenance & calibrations * Work safely following all required safe practices including LOTO, PPE, risk predictions, and work permits * Proactively utilize available resources for troubleshooting and repair (operators, maintenance team, electrical prints, manuals, OEM website resources) * Properly and safely utilize tools and diagnostic equipment * Identify parts required for repairs utilizing available resources (bills of material, parts lists, manuals, mechanical assembly drawings, etc.) * Perform machine adjustments as required to support operations * Examples of commonly encountered electrical devices and systems include switchgear and power distribution devices, MCC's, safety circuits, disconnects, fuses, PLC automation, motors, motor starters, relays, circuit breakers, VFD's, Cameras, photo eyes, prox switches, relays, motor starters, temperature probes, level sensors, flow meters, control valves and more * Participate in and support The Mahle Operational Excellence system * Utilize SAP Plant Maintenance CMMS system to document activities such as planned work, repair, and future work needed * Perform additional duties as required * Perform all work in a professional and workman like manner What we are looking for: * Associates degree, maintenance related certificate, or equivalent experience in Electrical Maintenance or Industrial Automation field * 3 years of prior experience as an Electrical Mechanical Technician -OR- 2-year technical degree in Electrical Maintenance or Industrial Automation AND 1 year of prior experience as Electrical Mechanical Technician * Prior work experience must include: diagnostic troubleshooting, repairing and replacing defective parts, adjusting machinery, and modifying units to meet proper operating specifications * Must be able to work overtime when required * Able to work with computers (navigating systems, recording information, locating information necessary to perform the job) * Able to use basic mathematical skills in order to perform machine and mechanical systems maintenance, calibrations, and repairs * Working knowledge in the area of pipefitting and rigging * Working knowledge of hydraulic and pneumatic principles * Advanced understanding of industrial electricity including motor basics and controls * Advanced knowledge of industrial automation and PLC based controls (Allen Bradley/Siemens) * Familiar with LOTO / Arc Flash safety regulation * Communication skills * Proven problem-solving Critical thinking skills * Ability to meet the physical requirements of the job * Experience in a high-speed manufacturing environment Our Offer We will provide a collaborative environment working on exciting assignments, along with ongoing personal & career development opportunities. We encourage you to apply even if you don't meet every single requirement. You may just be the right candidate for this or other roles! After receiving your online application, the interview process will typically be, a screening call followed by Personal Interview(s) For more information about MAHLE and what a career with us looks like for you, click here. and to learn more about our foundation owned technology group click here. #DiversityMatters with our inclusive culture, we welcome applications from all social, religious & ethnical backgrounds, disabilities both mental and physical, identities (gender) and neurodivergent people. MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website ****************** MAHLE Jobs & Career | Jobs With Opportunity to Advance MAHLE Careers Find your job at MAHLE. Get to know this leading international supplier to the automotive industry as an employer. Shape the future, with us. Do you have any questions? ****************** US Facts about the job Benefits: Benefits-US/CH_CN_DI_IB_LI_MA_MP_MW_OB_PH Entry level: Experienced hires Part- / Full-time: Full Time Functional area: Production - Maintenance Department: BU2 Thermal and Fluid System Location: Dayton, OH, US, 45404 Company: MTFS Dayton (US) Closing date for applications Don't waste any time, apply while the position is online. Your future at MAHLE As a team player and someone who thinks ahead, you can deploy all your skills with us. In cooperation with colleagues from different countries and areas, you contribute in designing the mobility of the future. When selecting MAHLE, you choose trend-setting technologies and strategies. Are you interested in working with us and developing efficient and environmentally-friendly solutions, optimising existing products, and turning innovative ideas into reality? Then MAHLE is the right address for you. Shape the future with us.

The Maintenance Technician is responsible for keeping our clubs well maintained and safe; making certain all mechanical systems are working properly including routine maintenance and repairs of basic plumbing, lighting, millwork repairs, door hardware and more to provide a positive experience for our members and guests. No two days will be the same and you'll likely experience a variety of slightly different challenges each day in a high-energy, health club environment. Job Duties/Responsibilities * Performs maintenance and repairs on a multitude of assets such as millwork, plumbing, lighting, pool systems, laundry equipment * Verifies thru logs and inspection systems: temperatures, pressures and chemistry meet state, local and company requirements * Responds to and prioritizes repair requests, responds immediately to emergency repairs * Records all repair and preventative maintenance activity accurately into Maintenance Tracking software Minimum Required Qualifications Education: * High School Diploma or GED Years of Experience: * 3 to 4 years of facility maintenance experience or equivalent training * Ability to routinely and repetitively bend and lift more than 20 lbs. * Ability to work in a stationery position and move about the club for prolonged periods of time Licenses / Certifications / Registrations: * CPR/AED certification required within 30 days of hire Pay This is an hourly position with wages starting at $23.50 and pays up to $31.75, based on experience and qualifications. Benefits All team members receive the following benefits while working for Life Time: * A fully subsidized membership * Discounts on Life Time products and services * 401(k) retirement savings plan with company discretionary match (21 years of age and older) * Training and professional development * Paid sick leave where required by law Full-time Team Members are eligible for additional benefits, including: * Medical, dental, vision, and prescription drug coverage * Short term and long term disability insurance * Life insurance * Pre-tax flexible spending and dependent care plans * Parental leave and adoption assistance * Paid time off, including 5 to 20 vacation days per calendar year (based on tenure) and paid sick leave * Deferred compensation plan, if the team member meets the required income threshold Life Time is a place for everyone. As an organization, we are committed to an inclusive, diverse and equitable workplace that respects and celebrates the unique contributions of each individual while ensuring we remain an equal opportunity employer that recruits, hires, trains and promotes based on merit and qualifications.

REPORTS TO: SUPERVISOR - MANTENANCE SHIFT: 3rd SHIFT 10 PM - 6:30 AM - (Sunday - Thursday) BENEFITS & PERKS - ELECTRO-MECHANICAL TECHNICIAN Top Workplace Winner Weekly Pay Free Meal Buffet, Discount on JTM Products Free Uniforms, Shoe Allowance Free Gym Membership, Free Health Screenings Full Medical Benefits 401K / Profit Sharing Generous PTO Bonus Potential (Referral Bonus & Years of Service Bonus) SCOPE - ELECTRO-MECHANICAL TECHNICIAN The Electro-Mechanical Technician responsible for performing preventive, predictive, and corrective maintenance on electrical and mechanical equipment and first-level support for controls troubleshooting in a food manufacturing environment. The role focuses on equipment reliability, safe execution, food safety compliance, and minimizing downtime through quick, accurate response and routine maintenance. KEY RESPONSIBILITIES - ELECTRO-MECHANICAL TECHNICIAN Perform scheduled preventive and predictive maintenance (PM & PdM) on production and utility equipment Respond to urgent and routine corrective maintenance needs to minimize equipment downtime. Troubleshoot and repair mechanical, electrical, and basic controls systems, including: motors, gearboxes, conveyors, pneumatics, actuators, and automated/robotic systems. Electrical components such as wiring, cords, plugs, contactors, overloads, switches, disconnects, fuses, relays, breakers, sensors, and limit/photo/proximity switches. Assist in replacing or installing electrical components, variable frequency drives (VFDs), and PLC processors. Use PLC software (e.g., Allen-Bradley) for first-level diagnostics (e.g., checking fault codes, I/O status, HMI interface)-no programming or code changes permitted. Collaborate with Controls Engineers for advanced troubleshooting and programming tasks. Maintain observation-only access to controls tools, respecting all boundaries related to programming, logic changes, and SCADA/MES systems. Accurately complete and close work orders in the CMMS, documenting all work performed for internal tracking and compliance (e.g., OSHA, USDA, BRC). Maintain and interpret electrical schematics, ladder logic diagrams, and technical manuals. Support a clean, safe, and efficient workspace by adhering to LOTO, arc flash safety, GMP, and all plant safety protocols. Work in cold environments, including freezers, as well as at elevated heights or in confined spaces, while wearing appropriate PPE. Work collaboratively with team members to support troubleshooting and drive continuous improvement. Other duties and special projects assigned by leadership. SUCCESS CRITERIA - ELECTRO-MECHANICAL TECHNICIAN Work safely, efficiently, and with minimal supervision. Adhere to all Maintenance, Safety, GMP, Food Safety, and Quality policies at all times. Arrive on time, work the full scheduled shift, and be available for overtime as needed. Demonstrate consistent punctuality and dependability. Communicate effectively with supervisors and team members. Contribute positively to team culture and build strong working relationships. Exhibit strong mechanical and electrical troubleshooting and problem-solving skills. Complete assigned tasks and work orders in a timely and accurate manner. Record all maintenance activities properly for internal tracking and regulatory compliance (J.T.M., BRC, OSHA, USDA). Demonstrate a proactive maintenance mindset and eagerness to learn. Train independently and collaborate with others to develop skills. Build and maintain a solid understanding of all manufacturing processes and equipment at J.T.M. EXPERIENCE AND SKILL REQUIREMENTS - ELECTRO-MECHANICAL TECHNICIAN High school diploma or GED required. 3+ years of industrial maintenance experience (6+ years preferred for senior-level candidates), ideally in food manufacturing or other regulated environments. Industrial Maintenance Certification, 3+ year apprenticeship, or associate degree in a related technical field preferred. Strong mechanical and electrical troubleshooting skills with working knowledge of pneumatic, hydraulic, and steam systems. Proficient in troubleshooting and repairing 480V 3-phase systems, including motors, drives, and controls. Familiarity with Allen-Bradley PLC systems for diagnostic use (no programming required). Experience using and interpreting CMMS tools, electrical schematics, mechanical blueprints, and ladder logic diagrams. Proficient in the use of electrical test tools such as digital multimeters, ammeters, and megohmmeters. Solid understanding of process control instrumentation including photo eyes, retroreflective, diffuse, laser, and proximity sensors. Ability to comprehend and apply technical data, wiring diagrams, schematics, and verbal instructions. Comfortable working in cold, hot, elevated, and confined environments while wearing proper PPE. Skilled in the safe use of hand and power tools; capable of accurately bending and installing conduit. Familiarity with National Electric Code, LOTO procedures, and arc flash safety practices. OSHA 10/30 certification, state electrical license, or journeyman credentials are a plus. Intermediate to advanced computer skills required. This is a full-time onsite position. *JTM Food Group is an affirmative action/equal opportunity employer. All qualified applicant will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity or genetic information. Equal Opportunity Employer M/F/Disabled/Vets. We participate in EVerify.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose, service, repair and install dock and door equipment. * Perform all assigned planned maintenance on customer dock and door equipment. * Welding. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Technical school graduate preferred. * Mechanical and electrical aptitude. * Welding experience. * Good written and verbal communication and customer care skills. * Read and understand hydraulic and electrical schematics * Familiar with tools and equipment such as common hand. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training * Company Vehicle for Field Service Technicians * Tool Insurance * No Flat Rate * 40 Hours Per Week plus Overtime * Uniforms * Specialty Tools * Primarily 1st Shift * Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Dayton Nearest Secondary Market: Cincinnati Job Segment: Welding, Maintenance Mechanic, Forklift, Warehouse, Mechanic, Manufacturing

**Your Key Responsibilities** + Lead the design, development, implementation, and continuous improvement of manufacturing technologies tailored to both newly launched and established Schaeffler products. + Drive cross-functional initiatives to optimize manufacturing processes emphasizing quality, efficiency, sustainability, and robustness, leveraging advanced statistical tools and data analytics for informed decision-making. + Conduct comprehensive process investigations to fine-tune equipment and production setups, considering the intricate interactions between product specifications, materials, tooling, and manufacturing locations. + Evaluate new technology deployments by thoroughly assessing product design and material feasibility, cycle time impacts, tooling requirements, and overall quality implications to ensure successful integration into production lines. + Collaborate closely with production teams to proactively identify and resolve manufacturing challenges, using data-driven troubleshooting approaches and continuous monitoring of production parameters. + Develop and maintain detailed manufacturing process documentation, including equipment and technology release protocols, setup instructions, and standard operating procedures that comply with internal and external standards. + Ensure adherence to globally defined manufacturing technology standards, best practices, and regional norms to maintain consistency and regulatory compliance across operations. + Negotiate specifications, timelines, and investments with suppliers from Schaeffler's approved vendor portfolio, outlining validation criteria and overseeing qualification and commissioning of production equipment, technologies, and tooling. + Foster effective collaboration with internal manufacturing technology groups at the divisional, business unit, and regional levels, as well as with central functions such as Purchasing, IT, Maintenance, and Quality Assurance to align strategies and leverage shared expertise. + Participate actively in manufacturing technology networks within Schaeffler, promoting technology transfer, innovation, and continuous improvement initiatives throughout the organization. **Your Qualifications** + **Bachelor's degree in Engineering or a related technical discipline from an accredited institution.** + **A minimum of five years of progressive experience in manufacturing technology, process engineering, or production optimization within an industrial or manufacturing environment.** + Proven expertise in utilizing statistical methods and digital tools for process analysis, troubleshooting, and optimization in a production setting. + Strong knowledge of manufacturing equipment, tooling, and technology standards along with a solid understanding of product lifecycle and production workflows. + Demonstrated ability to collaborate effectively with multidisciplinary teams including engineering, quality, production, and supplier management. + Excellent communication skills with the ability to prepare clear technical documentation and deliver presentations to diverse audiences. + Proficiency in project management and supplier negotiation is highly advantageous. + External applicants must have valid authorization to work in the United States without the need for visa sponsorship or employment-based immigration assistance. + A proactive and analytical mindset with a commitment to continuous learning and professional development. **Our Offering** + Medical, dental and vision insurance + Life insurance and 401k eligible with up to 6% company match + Regular employee appreciation and company events + Please see all our benefit offerings at Schaeffler Benefits (******************************** We look forward to your application. **Your Contact** Schaeffler Transmission, LLC Kim Korttila ********************** Keywords: Experienced; Engineer; Full-Time; Not Applicable; Production Engineering; **Nearest Major Market:** Canton **Nearest Secondary Market:** Akron **Job Segment:** Manufacturing Engineer, PLM, Process Engineer, Project Manager, QA, Engineering, Management, Quality, Technology

Join the Smithers team in a FULL-TIME position with BENEFITS (401k retirement plan, medical, wellness plan, HRA/FSA plans, vision, dental, disability, life, legal, PTO vacation, sick time, holiday pay, bereavement leave and more)! SUMMARY: Set up and perform multi-faceted product testing to fully characterize how components perform under stress, in various environments, and over time for a wide variety of industries. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Sets up and performs testing in accordance with specification(s). • Possesses strong mechanical aptitude. • Operates hand and power tools proficiently. • Has knowledge of or ability to learn and understand test methods, industry standards, and OEM specifications. • Follows daily work assignments relative to test schedule to ensure on-time delivery to clients. • Performs basic calculations from tests. • Writes reports and communicates with clients. • Follows all quality and safety procedures. • Maintains appearance of work area. • Repairs equipment as needed. • Availability for weekend checks. EDUCATION AND/OR EXPERIENCE: High School Diploma or General Education Degree (GED); Experience with tools, fluid systems, and electrical is preferred but not required. #MaterialsJobs #LI-JW1

Job Description Service Technician & Mechanic ALL Crane Service, LLC Independence, OH 44131 ALL Crane Service, located in Independence, OH is seeking a heavy duty Service Technician & Mechanic. This is a full-time, non-exempt position with comprehensive benefits package. This position is eligible for a $300 sign-on bonus after 100 days of continuous, successful employment. Essential Functions Responsible for troubleshooting, preventive maintenance, and repair on all makes of heavy duty trailers Diagnose, repair, adjust, and modify components as needed Reads, understands and interprets operating manuals, parts manuals, blueprints and technical drawings Positive interface with service writers, supervisor, parts department and customers Prepare proper documentation of actions taken Maintain conformity to safety requirements and other regulations Skills and Experience Requirements Experience performing DOT annual trailer inspections is a plus Must have a valid driver's license with an acceptable MVR Strong initiative required; ability to work independently with minimal direct supervision Must have basic set of mechanic's hand tools Experience using a cutting torch and welder is a plus but not required Ability to work safely around moving machinery; to work in conditions with marked changes in temperature & humidity Able to lift 50 lbs Benefits Competitive wages. Paid Time Off and Holidays. Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance). 401(k) retirement plan with company match. ALL Crane Family of Companies The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment. The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names - including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts. Since 1964, the ALL Family has been a leader in the lift industry - with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more. We're ALL you need The ALL Family of Companies is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity.

Role: Senior SEO (Search Engine Optimization) Specialist Employment Type: Full-Time Travel: None About The Role In this role, you will help lead and shape the future of SEO at Make & Model Marketing. You'll do more than just manage client work, you'll help refine our internal processes, set the standard for SEO strategy across our agency, and serve as a strategic voice for our SEO team. You'll be responsible driving organic growth for our dealership clients through smart, creative, and technically sound SEO strategies. This work will directly support our clients' goals of increasing visibility, attracting more car shoppers, and improving ROI through strong search performance. You'll also mentor and collaborate with our SEO and content team to ensure execution is aligned with client goals, industry trends, and best practices. This role is ideal for someone who is hands-on with SEO execution, but also passionate about building scalable systems, identifying what's next in the world of Search, and helping guide a team toward performance and results. Requirements: Minimum 4 years experience in SEO Deep familiarity with Google Analytics (GA4) Proven Experience with Google Search Console and optimizing Google Business Profiles to analyze website performance Proven experience working with SEO tools like Moz, SEMrush, Ahrefs, Screaming Frog, etc. Experience working within CMS platforms like WordPress A deep understanding of SEO best practices Strong project management and organizational skills Strong written and verbal communication skills - especially in translating technical SEO concepts into business value Responsibilities: Develop and execute SEO strategies to increase organic traffic and lead generation for client websites Manage and prioritize SEO efforts across your own portfolio of client accounts, balancing multiple projects and deadlines Work closely with client account managers to understand client goals and expectations and integrate these into your SEO strategy Collaborate with content writers, developers, and designers to implement on-page SEO best practices and technical improvements Measure and report on SEO performance using data from Google Analytics, Google Search Console, and our internal reporting tools Monitor keyword rankings, website traffic, backlinks, and other SEO indicators to identify trends and opportunities Make on-age SEO and structural updates directly within various client CMS platforms Stay current with SEO best practices, algorithm updates, and emerging tools through ongoing training and professional development The Ideal Candidate: Is eager to learn quickly, ask questions, lead, and grow within a collaborative team Brings fresh ideas to the table and follows through with thoughtful execution Is highly organized, able to prioritize multiple projects, and comfortable working alongside our co-founders to meet deadlines Works well with others and contributes to a positive, team-oriented culture Is passionate about digital marketing and excited to make an impact through SEO Is both creative and strategic - able to develop and execute SEO strategies while helping shape and refine internal processes Has a deep understanding of SEO fundamentals, search engine behavior, and digital marketing best practices Is highly proficient with GA4, Google Search Console, Google Business Profiles, and SEO tools like SEMrush and Screaming Frog Loves staying up to date with out Search is changing Has an interest in how AI and LLMs are impacting and shaping SEO and content discovery, and is comfortable experimenting with these tools The First 90 Days: You'll be fully supported as you ramp up and immerse yourself in Make & Model's SEO approach, tools, and client work Work closely with current SEO team members to understand the day-to-day responsibilities, strategies, and technical processes that drive performance for our clients Collaborate with account managers to gain insight into the automotive industry, our clients' businesses, and their goals and expectations Learn what high-quality work looks like at Make & Model and the standards we uphold across every client and campaign Become familiar with the tools, platforms, and systems we use to manage SEO projects, track performance, and communicate effectively as a team Begin taking full ownership of your own portfolio of clients - managing multiple accounts independently and executing strategies that align with client goals and our internal benchmarks By the end of your first 90 days, you'll be well-equipped to manage your own accounts with autonomy, clarity, and the support of the team behind you. Compensation and Benefits Compensation: $80,000 - $85,000 / year Your final compensation will be determined by your experience level and skillset Compensation is reviewed every 6 months Medical, Dental, & Vision Insurance (Employer pays 50% of premiums) Simple IRA + 3% Matching Opportunity 10 Paid Time Off days in your first year + your birthday. 15 PTO days after 5 years with our company. 20 PTO days after 10 years with our company. Paid Holidays Continuous Training Opportunities Flexible Hours - This position requires employees to work onsite at our office for 7 hours per day. Our office is open from 8:00 AM to 6:00 PM, allowing you the flexibility to choose a schedule that works best for you within those hours

Job Description Are you ready to turn your passion for HVAC and refrigeration into a thriving career? Your opportunity awaits at JAGS Mechanical, where we're actively seeking a dynamic full-time Service Technician for both our Cincinnati, OH, and Columbus, OH branches. The Service Technician in Cincinnati will cater to Cincinnati, and the Service Technician in Columbus will focus on servicing the Columbus area. Earn between $50,000 - $120,000 per year as well as enjoy great perks and benefits like a company vehicle and quarterly bonuses based on your stellar performance. Exciting challenges, career growth, and a supportive culture await. Ready to redefine comfort and efficiency with us? If so, read on to find out more! WHAT IS JAGS MECHANICAL ALL ABOUT? At JAGS, we're more than a company; we're a community of forward-thinkers passionate about blending innovation with tradition. Our mission? Redefine industry standards by creating comfortable, efficient spaces. We value collaboration, offer growth opportunities, and pride ourselves on a culture that celebrates achievements and supports each team member's journey. Who Shouldn't Apply People who stay stagnant in their careers and aren't looking to grow. Anyone who struggles to stay in a role for at least two years. Those who think growth comes without hard work and challenges. Constant complainers who focus on problems instead of solutions. People who are content with staying the same and not improving. We're building a team of motivated, hardworking individuals who want to push themselves and grow with us. If that sounds like you, we'd love to have you on board. A DAY IN THE LIFE AS A SERVICE TECHNICIAN: Picture this: The sun is rising over the city, and you, our ingenious Service Technician, are geared up for another day of turning technical challenges into triumphs. You dive into repairing HVAC systems, seamlessly transition to tackling refrigeration issues, and cap off your day mastering the art of fixing food service equipment. Each day is an adventure, a puzzle waiting to be solved, and you're the hero making it happen. QUALIFICATIONS: No experience is needed! We invest in you, providing training and sending you to trade schools. However, experience in HVAC, refrigeration, food service equipment repair, electrical, or plumbing would be a plus! WORK SCHEDULE & LOCATION: Schedule: 8 AM - 5 PM, Monday - Friday, with rotating on-call shifts Location: Hiring for both our Cincinnati, OH, and Columbus, OH branches READY TO EMBARK ON THIS EXCITING JOURNEY? Take the first step by applying with our 3-minute, mobile-friendly initial application. It's quick, easy, and the beginning of your transformative career with JAGS Mechanical! Job Posted by ApplicantPro

The University of Dayton Research Institute (UDRI) is seeking a highly skilled and innovative Senior NDI Engineer / Ultrasonic Specialist to join our dynamic Structural Materials division. This full-time position offers an exceptional opportunity to contribute to cutting-edge research and development projects in the field of non-destructive inspection (NDI) and ultrasonic testing. UDRI is a national leader in scientific and engineering research, serving government, industry and nonprofit customers. This is a full time benefit eligible position that offers health, dental and vision insurance, retirement, disability, vacation and sick accrual, paid holidays, as well as tuition assistance for yourself and dependent. Join the UDRI team and apply now! This person will work with the NDI team lead in support of evaluating, performing, integrating and advancing NDI methods for aerospace applications. Inspection of aircraft structures, engines, and support components for damage due to in-service or manufacturing induced flaws will be performed on metallic and composite materials. Inspections will be performed in accordance with existing standards or to qualify new processes meeting those standards. Duties include day to day investigations on parts and components and data processing and evaluation. Operation and maintenance of tomography, ultrasonic, and shearography equipment. Minimum Qualifications: • Bachelor's degree OR 8+ years of experience in NDE methodologies. • Proficient in Eddy Current, Ultrasound, Radiography, tomography, liquid penetrants. • Experience with Microsoft word, Power Point, Excel. • Excellent written and oral communication skills. • Leadership Skills. • ASNT/NAS410 Level 2 in Eddy Current. • Due to the requirements of our research contracts with the U.S. federal government candidates for this position must be a U.S. Citizen. • The ability to obtain secret or higher clearance is a requirement of this position. Preferred Qualifications: While not everyone may possess all of the preferred qualifications, the ideal candidate will bring many of the following: • Hands-on experience with DoD equipment. • ASNT/NAS410 Level 3 Ultrasonics. • ASNT/NAS410 Level 3 or greater Radiography Certificate. • Secret Clearance. • Experience with mentoring and training junior level associates. Special Instructions to Applicants: To apply please submit a cover letter addressing each minimum qualification and any applicable preferred qualifications that you meet. Closing Statement: Informed by its Catholic and Marianist mission, the University is committed to the principles of diversity, equity, and inclusion. Informed by this commitment, we seek to increase diversity, achieve equitable outcomes, and model inclusion across our campus community. As an Affirmative Action and Equal Opportunity Employer, we will not discriminate against minorities, women, protected veterans, individuals with disabilities, or on the basis of age, race, color, national origin, religion, sex, sexual orientation or gender identity.

Job Description Service Technician & Mechanic - Boom Trucks ALT Sales Corp. Richfield, OH (44286) ALT Sales Corp., located in Richfield, OH is seeking motivated employees to work with us building and servicing Boom Trucks. Hands-on experience as a Crane or Heavy Duty Truck Service Technician & Mechanic is a big plus but training may be available for the right person. This is a full-time, non-exempt position with comprehensive benefits package. The position is eligible for a candidate sign-on bonus of $300 after 100 days of continuous employment. Essential Functions Responsible for building, troubleshooting, maintenance, and repair on all makes of Boom Trucks Diagnose, repair, adjust, and modify components as needed Reads, understands and interprets operating manuals, parts manuals, blueprints and technical drawings Positive interface with service writers, supervisor, parts department and customers Prepare proper documentation of actions taken Able to work with diagnostic equipment for troubleshooting and repairs Maintain conformity to safety requirements and other regulations Other duties as assigned Skills and Experience Requirements A diesel engine, hydraulic, and electrical background is highly desired Must have basic set of mechanic's hand tools Strong initiative required; ability to work independently with minimal direct supervision Ability to work safely around moving machinery; to work in conditions with marked changes in temperature & humidity Ability to safely operate complex construction equipment A CDL with an acceptable driving record is highly desired but not required Able to lift 50 lbs Manufacturer's training will be an integral part of this position. Applicant must be willing to learn new computer, electronic and hydraulic systems, follow safety guidelines as they evolve in our industry, and remain certified within the various portions of our field such as assembly, disassembly, and troubleshooting. Benefits Competitive wages. Paid Time Off and Holidays. Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance). 401(k) retirement plan with company match. ALL Crane Family of Companies The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment. The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names - including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts. Since 1964, the ALL Family has been a leader in the lift industry - with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more. We're ALL you need The ALL Family of Companies is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity.

Job Description Service Technician & Mechanic - Aerial Lifts ALL Aerials, LLC Richfield, OH (44286) ALL Aerials, LLC. is seeking an Aerial Lift Service Technician & Mechanic. Hands-on experience with aerial boom and scissor lifts is a big plus but training may be provided for the right individual. Depending on experience this may lead to a Field Technician role. This is a full-time, non-exempt position with a comprehensive benefits package. This position is eligible for a $300 candidate sign-on bonus after 100 days of continuous employment. Essential Functions Responsible for troubleshooting, maintenance, and repair on all makes of aerial boom and scissor lifts Diagnose, repair, adjust, and modify components as needed Reads, understands and interprets operating manuals, parts manuals, blueprints and technical drawings Positive interface with service writers, supervisor, parts department and customers Prepare proper documentation of actions taken Able to work with diagnostic equipment for troubleshooting and repairs Maintain conformity to safety requirements and other regulations Skills and Experience Requirements Must have a strong diesel engine, hydraulic and electrical background Must have basic set of mechanic's hand tools Must have a valid Driver's License with an acceptable MVR Strong initiative required; ability to work independently with minimal direct supervision Ability to work safely around moving machinery; to work in conditions with marked changes in temperature & humidity Ability to safely operate complex construction equipment Able to lift 50 lbs Manufacturer's training will be an integral part of this position. Applicant must be willing to learn new computer, electronic and hydraulic systems, follow safety guidelines as they evolve in our industry, and remain certified within the various portions of our field such as assembly, disassembly, and troubleshooting. Benefits Competitive wages. Paid Time Off and Holidays. Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance). 401(k) retirement plan with company match. ALL Crane Family of Companies The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment. The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names - including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts. Since 1964, the ALL Family has been a leader in the lift industry - with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more. We're ALL you need The ALL Family of Companies is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity.

ALL Aerials, LLC Richfield, OH (44286) ALL Aerials, LLC. is seeking an Aerial Lift Service Technician & Mechanic. Hands-on experience with aerial boom and scissor lifts is a big plus but training may be provided for the right individual. Depending on experience this may lead to a Field Technician role. This is a full-time, non-exempt position with a comprehensive benefits package. This position is eligible for a $300 candidate sign-on bonus after 100 days of continuous employment. Essential Functions Responsible for troubleshooting, maintenance, and repair on all makes of aerial boom and scissor lifts Diagnose, repair, adjust, and modify components as needed Reads, understands and interprets operating manuals, parts manuals, blueprints and technical drawings Positive interface with service writers, supervisor, parts department and customers Prepare proper documentation of actions taken Able to work with diagnostic equipment for troubleshooting and repairs Maintain conformity to safety requirements and other regulations Skills and Experience Requirements Must have a strong diesel engine, hydraulic and electrical background Must have basic set of mechanic's hand tools Must have a valid Driver's License with an acceptable MVR Strong initiative required; ability to work independently with minimal direct supervision Ability to work safely around moving machinery; to work in conditions with marked changes in temperature & humidity Ability to safely operate complex construction equipment Able to lift 50 lbs Manufacturer's training will be an integral part of this position. Applicant must be willing to learn new computer, electronic and hydraulic systems, follow safety guidelines as they evolve in our industry, and remain certified within the various portions of our field such as assembly, disassembly, and troubleshooting. Benefits Competitive wages. Paid Time Off and Holidays. Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance). 401(k) retirement plan with company match. ALL Crane Family of Companies The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment. The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names - including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts. Since 1964, the ALL Family has been a leader in the lift industry - with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more. We're ALL you need The ALL Family of Companies is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity.

Sierra Lobo, Inc. offers customers a full range of professional and technical capabilities, including Test and Evaluation, Systems Engineering, and Advanced Technologies. We also develop products and processes related to Cryogenic Fluid and Thermal Management Systems, Densified Propellant Management Systems, and Prototype Extreme Pressure and Temperature Systems. Our customers include the Department of Defense (DoD), the U.S. Air Force, U.S. Navy, U.S. Army, Missile Defense Agency (MDA), and the National Aeronautics and Space Administration (NASA). This is a full-time direct-hire position located at or near our Hoover Road facility in Milan, Ohio. The successful applicable will support multiple integrated project teams in the reactivation and ongoing operation of a world-class government-owned aerospace research and test facility. Responsibilities Fabricate, install, modify, maintain/repair a wide variety of electrical systems such as: Low and medium voltage AC power systems DC power systems PLCs Raceway and Conduit and Systems Illumination/lighting Transformers Generators Switchgear Breakers, switches, relays, starters, and field devices Perform: Reverse-Engineering of existing systems Wire crimping and termination Motor maintenance Work with devices such as valve limit switches, pressure transducers, valve control loops, vacuum and flow switches, proximity detectors, flame and combustible gas detectors, photocells, thermocouples, transducers, etc. Qualifications Qualifications Requires comprehension of: NFPA 70 “National Electric Code” NFPA 70E “Standard for Electrical Safety in the Workplace” OSHA Standards IEEE Standards Experience with ISO9001:2000 or AS91000 Quality Systems Read and interpret electrical drawings, sketches, and technical documentation Basic Qualifications: Journeyman Electrician Certificate (Preferred) or Associate of Applied Science Degree in Engineering Technology Minimum six (6) years of related field experience Must be a US Citizen

Join us for an exciting foot in the door to the coolest place to work for, ever. This position in the Solon/Twinsburg area serves the MRI healthcare industry. These products and culture are an amazing opportunity for candidates that want to learn, grow and provide for their families through meaningful employment. We are seeking an Electronic Engineering Technician to start immediately for full time hours on 1st shift. Available Shifts: 1st Shift: 7a-3:30p $21.50/hr. Role Summary: Performs diverse assignments in support of product development and manufacturing. Assignments may include but are not limited to set up and running of data acquisition equipment for tests, carrying out experiments, reporting/documenting results of tests and measures, lead compliance and quality activities and train other team members. Responsibilities: • Test production assemblies and sub-assemblies for correct operation and compliance to performance specifications. • From detailed instructions, set up or modify equipment, calibrate and operate equipment (mainly routine tests & manufacturing operations). • Tune equipment as per detailed instructions. • Under close supervision, performs routine experiments and troubleshooting and unknowns to achieve root cause analysis and problem resolution. Conduct experiments and diagnostic tests, as required to draw conclusions Adjust variables as directed, take specified data, and bring equipment irregularities to the attention of the supervisor. Required Qualifications: • Associates degree in a Manufacturing, Engineering or Technology related fields, or a High School diploma and 2 years' experience as defined by having demonstrated electrical specific skills at a technician equivalent role proven in a formal educational and/or work environment. • Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques • Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process #IND100