Senior engineer jobs in Greensboro, NC - 248 jobs

We are hiring for Retail client Systems Engineer IV Job Type: W2/C2C We do have 4 roles with the same client & multiple location listed below. Senior z/OS Performance & Capacity Management Engineer Senior z/OS Operating System Engineer (z/OS, RACF) Senior z/OS Database System Engineer (DB2, IMS/DB) Senior z/OS Transaction and Network System Engineer Location: Remote--as long as they are near one of the service centres (Salisbury NC, Chicago IL, Quincy MA, Carlisle PA, Greeneville SC) Once you applied will share the full job description to your email address with respected roles & Responsibilities.

Legal Entity: American Honda Motor Co., Inc. Business Unit: Law & Intellectual Property Department: Contracts Division: Corporate Operations Support Shift: 1st Workstyle: 100% Onsite Career Level: 6 Job Grade: Exempt-IC2 Job Purpose This role provides high quality, proactive legal services, negotiating, drafting, and advising on Honda contracts that have a substantial impact on Honda's manufacturing operations and potential liabilities. This includes advising on contracts for direct parts, raw materials, & dealer service parts contracts, capital production equipment and other facility and production related contracts, supply chain contracts, service agreements, and logistics contracts. The role will provide timely and cost-effective basis for moderate to highly complex matters. The role will primarily focus on support related to Honda Aircraft Company, LLC in Greensboro, NC, but may also include support for a variety of Honda companies throughout the North American Region. This role will research and draft agreements, policies, and procedures, perform legal research on state and federal laws, retain and supervise outside counsel where applicable, provide legal education/training to various Honda entities, manage risks by identifying countermeasures, and undertake projects to proactively identify issues and take steps to implement countermeasures. Key Accountabilities Direct and Indirect Commercial Support: Provide high quality advice and negotiation, in a timely and cost-effective manner, to enable Honda Companies and/or divisions to meet legal obligations and reduce risk for moderate to complex commercial transactions. This includes negotiating and managing high value/critical contracts for direct automotive parts, raw materials, & dealer service parts contracts, capital production equipment & other facility and production related contracts, as well as supply chain contracts, service agreements, and logistics contracts. Support and lead special projects and other commercial and law initiatives. Advise business teams on commercial disputes involving suppliers and work with team to resolve disputes for applicable Honda entities. Manage applicable outside counsel and fees, to reach the best long-term solution for Honda in moderate to complex matters. Knowledge management: Follow changes in all relevant international, federal and state laws and regulations, and exchange and share legal knowledge within the applicable Honda entity/division/department, as well as train Honda business and law associates in legal best practices, to improve the awareness, quality and effectiveness of the legal function. Projects: Participate in the planning, execution, and leadership of assigned projects with a regional focus. Qualifications, Experience, and Skills Juris Doctorate Degree from an Accredited Law School Admittance to state bar in a state in the U.S., and will be either admitted to the North Carolina bar or eligible to qualify for in-house practice in North Carolina At least 10 years of in-house, law firm, or other equivalent legal experience, good knowledge of the areas of Contracts and Commercial legal practice areas. Aviation experience is preferred but not required Excellent skills in communication, problem solving, client satisfaction, building relationships, coaching, decision-making, risk analysis, flexibility/adaptability, patience, listening, good writing, risk taking, focusing on achieving results and supporting others to achieve results, and legal technical knowledge Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Timmons Group is always accepting applications from experienced Project Engineer II and III candidates to join our team for future opportunities. If we do not have an immediate need at your level in your area if interest, we may hold your resume for future consideration. We typically hire engineers with experience in the following areas: * Land Development (Residential, Commercial and Municipal/Government) * Water Resources * Traffic &Transportation * Structural Essential Duties and Responsibilities of a successful candidate include but are not limited to: * Design portions of a project using relevant office software, modeling and Civil 3D technology * Complete calculations using engineering formulas and skills and/or utilizes computers in order to solve problems * Prepare specifications materials through the use of research and manufacturing catalogs to specify materials, installation, inspection and payment of items specific to a project * Work to complete design details and plan sets * Perform research and writes objective summary reports which are used in the completion of the project work or inspection * Assist in the preparation of engineering and construction cost estimates * Complete field observation, inspection and data collection duties as directed by senior engineering staff * Communicate with client staff and internal design team as directed by senior engineering staff Skills/Requirements of a successful candidate include but are not limited to: * A bachelor's or master's degree in Civil Engineering or a closely related degree * Ideal candidates would have at least two years of experience in civil engineering, EIT preferred * Working knowledge of Civil 3D preferred, and Bentley OpenRoads for Transportation related positions

Stefanini Group is hiring! Do you want to be a part of a highly innovative, digitally transformative team and work on cutting edge, state of the art technologies in the Automotive Industry? If yes, then this is for you! Please read the description below and reach out to us! We are looking for an Assembly Tooling & Equipment Engineer who is responsible for coordinating T&E development and connecting T&E engineers (& WPs) with LTSs, Plant PMs, and TPEs, to secure project timelines, budgets, and other plant deliverables. Responsibilities: Coordinating T&E development including concept selections Will coordinate TERs (Tooling & Equipment Request) process - timing Ensure that Work Packages (from various contractor houses) are delivered with good quality - zero defect mindset Along with Plant PMs, define and secure T&E deployment for P6700 C-builds - deliver the tools and equipment Support TPEs & LTSs on the TER's inputs towards the P6700 C-releases - secure product & process final solution B.S. Engineering degree T&E (Tools & Equipment) designing experience CAD experience (CATIA / CREO preferably) Project Management Experience Additional information: This job is for roughly 1 year, with possibility for extension. The first 6 months will require some travel to NRV, and the next 6 months will require often trips to NRV. Interested applicants may click the apply button or you may call us at ************** for faster processing. Thank you.

Job Description Title: Senior Facilities & Plant Engineer Kernersville, North Carolina Reports To: Plant Manager Direct Reports: Maintenance Technicians The Senior Facilities/Plant Engineer will support the Tex-Tech Coatings (TTC) division, overseeing equipment, facilities, and maintenance operations across multiple sites. This role ensures operational reliability, compliance, and efficiency while leading a team of maintenance professionals. Occasional travel to customers, suppliers, and vendors is required. Key Responsibilities Lead equipment and facility maintenance across TTC sites (Main Plant, External Warehouse, Weaving Facility). Supervise and coordinate maintenance, mechanical, and electrical teams to ensure safe and efficient operations. Manage boiler operation, electrical systems, compressed gases, water, refrigeration, and wastewater treatment for uninterrupted service. Maintain emission control devices (Solvent Recovery Unit, Thermal Oxidizer, Water Scrubber) ensuring EPA compliance. Develop and execute preventive maintenance programs to maximize uptime and equipment reliability. Oversee installation, relocation, and modification of production equipment. Ensure plant security, fire protection systems, and safety compliance. Support Environmental, Health, and Safety (EHS) programs. Inspect ongoing and completed work to maintain quality standards and OSHA safety compliance. Coordinate contractor activities for plant projects and maintenance functions. Manage inventory control of maintenance materials, supplies, and spare parts. Recommend and implement process improvements to enhance production efficiency and reduce costs. Design and modify electrical and mechanical equipment layouts for optimal plant flow. Support Capital Expenditure (CapEx) and Maintenance, Repair & Operations (MRO) planning. Oversee budgeting, financial reporting, and maintenance spend tracking. Lead and manage capital projects from concept to completion. Drive employee development, training, and succession planning. Maintain and update plant drawings and schematics. Ensure compliance with permits, inspections, and regulatory requirements. Other duties may be assigned Education Bachelor's Degree in Engineering (Mechanical, Electrical, Industrial, or related technical field). Qualifications & Skills 10+ years of experience in manufacturing, plant engineering, or industrial maintenance. Proven leadership and supervisory experience managing maintenance teams. Strong knowledge of mechanical principles, machining practices, and fabrication techniques. Expertise in modern manufacturing processes, assembly techniques, and machine-shop practices. Ability to diagnose, troubleshoot, and resolve equipment and tooling problems. Skilled in process improvement, lean manufacturing, and cost reduction strategies. Excellent oral and written communication skills. Proficient in AutoDesk, SolidWorks, and CAD design software. Familiarity with computer-controlled machine tools, high-volume automated production equipment, and ERP systems. Strong initiative and ability to work independently with minimal supervision. Travel Requirements Occasional travel to suppliers, customers, and training courses. Physical Requirements Ability to work in non-climate-controlled manufacturing environments. Comfortable with loud equipment, chemicals, and PPE requirements. Ability to lift up to 50 lbs. occasionally, walk stairs, and stand on concrete floors. Benefit Program • Medical Care with Telemedicine service • Dental Care • Vision Care • Life and Accidental Death & Dismemberment Insurance (Employee Only) • Optional Supplemental Life Insurance and/or Dependent Life Insurance • Optional Accident and Critical Illness Insurance • Flexible Spending Accounts • Short-Term Disability • Long-Term Disability • Paid Time Off (PTO) • 401(k) Retirement Program Internal Development • Tuition Reimbursement Program • Wellness Programs • Internal Development

Basic Qualifications Requires a Bachelor's degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. Agile experience preferred. CLEARANCE REQUIREMENTS:: Department of Defense Top Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for Undersea Systems, you'll be a member of a cross functional team responsible for developing Undersea Communication Systems. We encourage you to apply if you have any of these preferred skills or experiences: High Voltage DC Power systems / Module design. Experience should include multiple power topology design experience from few watts to KW+ converters. High voltage applications, power transmission systems, power electronics and HVDC technology What sets you apart: Deep understanding of electrical engineering computer-aided design (CAD) tools and mixed Signal circuit analysis/design Solid use of electrical engineering concepts, principles, and theories Circuit Design expertise Analog design and instrumentation (design and analysis) Circuit board test and troubleshooting expertise Isolated Switching Converters Fiber optic experience with transmitters, receivers, optical passives and fiber handling are desirable Strong troubleshooting ability: must be able to diagnose a problem by narrowing the point of failure sequentially through components Experience in the use of specialized laboratory equipment such as spectrum analyzers, oscilloscopes, and other test equipment for development, testing, and troubleshooting Experience in working in a lab environment building circuit cards, assemblies, and modules Experience in writing specifications, requirements, and verification procedures for complex electronic systems and components Experience with Worst Case Circuit Analysis and FMEA for both design and diagnosis applications Ahead of technology trends with Research & Development (R&D) experience, as well as advanced proficiency in test, troubleshooting, and analyzing circuit card schematics Motivated to drive innovation around design architectures, assembly, component selection, and electronics design Exceptional collaboration and communication skills with demonstrated success leading design teams for complex projects Team player committed to ongoing professional development for yourself and others Ability to travel as needed Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site While on-site, you will be a part of the McLeansville NC Design Center #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $112,924.00 - USD $125,275.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Are you someone who is ready to dive right in and make an impact on exciting multimillion-dollar projects? If so, we are looking for motivated candidates to join our innovative team! Working alongside Project Managers and Estimators, you will assist in all aspects of the estimating and project management process. If you are self-motivated, and like to problem-solve, multi-task, and assume ownership of your work, contributing to the success of our projects, then apply today! Position Responsibilities: Assist in the estimating process as directed, including attending pre-bids, quantity take-offs, sub-bid solicitations Develop and update both a master and short interval schedule for distribution project control Provide weekly submission of quantities installed to be used for productivity reporting Complete document control procedures (Drawing Log) including issuance of relevant documents to sub trades Compile and submit required submittal packages with shop drawings for approval followed by completion and update of the submittal log Compile and track material status log Compile and update project punch list or issues matrix Review weekly productivity reports for potential areas of improvement with the Project Manager and Superintendent and suggest changes as needed Assist with coordinating sub-bid solicitations and procuring resources such as suppliers, manpower, and equipment Assist the Project Manager and Superintendent in daily coordination of subcontractors and suppliers Ensure proper documentation for any additional work Assist the Superintendent to ensure completion of “As Built” drawings Assist the Project Manager and Superintendent in completing project closeout requirements Maintain project file and shop drawing processing and assigned contract administration duties Prepare submittal package compilation Assist with financial management by writing and issuing change orders, approving material invoices, and tracking material, labor and equipment

The Systems Engineer is responsible for the proactive administration of the hardware platforms, operating systems and the dependent services for LFUSA. This includes the configuration, installation, deployment, monitoring and troubleshooting of server hardware, operating systems, and services, resolving outages and documenting designs, processes and procedures. Knowledge, Skills and Abilities Required: 3-5+ years of experience in the IT related industry 3-5+ years of operational systems and support experience in a large, dynamic TSM environment Advanced knowledge of back-up strategies and data loss risk remediation Strong operational knowledge of Microsoft Server platforms and technologies including Windows Server 2003/2008/2012, Citrix 4.X-5.X, IIS, DNS, and DHCP Strong operational knowledge of Redhat Linux and VM Linux Strong operational of storage methodologies including IBM v series, Netapp Strong working knowledge of the installation, configuration, recovery, SRM and administration of VMware ESX Server 4.X, 5.X in a large enterprise clustered/high availability environment Demonstrates commitment to providing customer focused quality service Proven ability to work in both a team environment and independently Experience with MS Exchange 2010 DAG's and application disaster recovery methodologies Some travel may be required Qualifications: Bachelors' degree in Computer Science, Information Systems preferred 3-5+ years hands on experience with Microsoft Windows 2003/2008/2012 as a Systems Engineer preferred 3-5+ years of hands on experience with Linux OS 3-5 years of hands on experience with Storage Systems administration 2+ years hands on experience with VMware ESXi 4.x/5.x Experience with 200+ VM's Experience with 100+ physical Intel based servers (preferably IBM X-Series) Excellent communications skills both written and verbal Ability and availability to work occasional nights/weekends assignments as necessary Additional Information Send me your resumes at vince@alphait. us Pozdrawiam / With best regards, Alpha Technologies Inc (USA) Vince Taylor Sr Technical Recruitment Specialist

Type of Requisition: Regular Clearance Level Must Currently Possess: Top Secret/SCI Clearance Level Must Be Able to Obtain: Top Secret/SCI Public Trust/Other Required: None Job Family: IT Infrastructure and Operations Job Qualifications: Skills: Business Communications, Complex Systems, Operating Systems (OS), Software Applications Certifications: None Experience: 5 + years of related experience US Citizenship Required: Yes Job Description: Deliver simple solutions to complex problems as a Senior Systems Engineer at GDIT. Here, you'll tailor cutting-edge solutions to the unique requirements of our clients. With a career in application development, you'll make the end user's experience your priority and we'll make your career growth ours. At GDIT, people are our differentiator. As a Senior Systems Engineer you will help ensure today is safe and tomorrow is smarter. Our work depends on Systems Engineers joining our team to enhance current capabilities, work with the team to develop future capabilities that will ensure our organization is on the cutting edge of technology. HOW A SYSTEMS ENGINEER WILL MAKE AN IMPACT Designs server and application architectures; performs administrative operation and maintenance functions of server hardware and software. Maintains system security and executes common practices and procedures; monitors usage statistics and logs; monitors and remedies attempt to penetrate or corrupt server files. Maintains baseline configurations and performs modification of configuration settings. Institutes troubleshooting and incident response procedures. Troubleshoots system related problems. Provides team leadership and guidance to less experienced administrators. Remains current in operating systems/software analysis and technological developments and applications. Recommends future direction or projects to management. Provides expertise and direction in the development or modification of software programs and applications to enhance an operating system. WHAT YOU'LL NEED TO SUCCEED: Education: Bachelor's Degree or equivalent experience Required Experience: 5+ years of related experience. Required Technical Skills: 4+ years' of experience as a Linux systems administrator. Security+ certification (DoD 8140 requirement). Experience with VMware and/or other virtualized systems. Database SQL/PostGres/Redis experience. Coding or scripting experience. Excellent communication and briefing skills; shows tact, effective listening skills and follow through. Provides technical guidance and leadership to engineers with less experience. Cloud Dev/Ops experience Security Clearance Level: TS/SCI (Required) Required Skills and Abilities: Detail oriented and organized; ensure accuracy of work. Pursues ongoing education in technical topics. Good business communication skills Preferred Skills: Windows System and server experience. Containerization experience. Agile/DevOps/GitLab experience or certification. Location: On Customer Site Citizenship Required: US Citizenship GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities Support: An internal mobility team focused on helping you achieve your career goals Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career in intelligence at GDIT and you'll find endless opportunities to grow alongside colleagues who share your passion for securing the mission. The likely salary range for this position is $93,500 - $126,500. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 10-25% Telecommuting Options: Onsite Work Location: USA NC Fort Liberty Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Full-time Description The Staff Professional / Staff Engineer supports engineering, geotechnical, and environmental projects by performing field observations, testing, analysis, reporting, and project coordination tasks. This position requires technical aptitude, a strong commitment to safety and quality, and the ability to work effectively in both field and office settings under the supervision of senior staff. Essential Duties and Responsibilities Field Observation and Testing Perform field and laboratory testing of soils, aggregates, concrete, masonry, asphalt, and other materials in accordance with applicable ASTM standards (e.g., ASTM D1557, D6938, C39, C231, etc.). Observe and document construction practices for compliance with approved project plans, specifications, and applicable codes. Operate specialized testing equipment such as nuclear density gauges, penetrometers, and concrete testing apparatus. Documentation and Reporting Accurately document all field observations and test results using proper English grammar and technical writing practices. Prepare clear, concise field and laboratory reports in a timely manner for internal review and client submission. Project Support and Management (as experience is gained) Assist in project setup including reviewing plans, obtaining project specifications, and coordinating schedules. Support project managers with scheduling technicians and field staff, communicating with clients, writing technical reports (e.g., footing letters, remedial recommendations), attending site visits, and participating in project meetings. Perform billing, review budget summary reports, and assist with collections as necessary. Uphold the company's professional image through consistent, positive client interaction and communication. Health and Safety Compliance Follow all safety protocols and company policies outlined in the Geo-Hydro Safety and Health Manual. Wear proper personal protective equipment (PPE) and participate in required safety training. Maintain awareness of site-specific hazards and promote a culture of safety. Business Development and Client Relations Attend networking or client engagement functions as assigned by supervisor. Assist with drafting technical proposals, scopes of work, and budgets. Additional Expectations Display professionalism in communication, dress, and behavior when representing the company. Demonstrate a willingness to learn and grow professionally under the guidance of senior staff. Support the company's mission and values through teamwork, accountability, and continuous improvement. Additional duties as required. Requirements Physical Requirements Lift, carry, and handle materials and equipment weighing up to 100 pounds. Maneuver heavy equipment such as concrete wheelbarrows (150-200 lbs), soil density hammers (25 lbs), and nuclear density gauges (up to 90 lbs). Perform physically demanding tasks such as swinging concrete test devices, hand augering up to 10 feet, or excavating with hand tools. Driving Requirements Possess and maintain a valid driver's license. Driving record must be insurable under the company's vehicle insurance policy, subject to the discretion of the company's carrier. Regular review of driving history will be conducted and may impact job duties or status. Minimum Education and Certifications Bachelor's degree from an accredited 4-year program in Civil Engineering, Geology, Environmental Science, or a related discipline. Successful completion of the Engineer-In-Training (EIT) or Geologist-In-Training (GIT) exam, or ability to obtain certification within a reasonable time. Pursuit of Professional Engineer (P.E.) or Professional Geologist (P.G.) registration when eligible is expected. Must possess or obtain relevant certifications including but not limited to ACI, ICC, OSHA 10/30-hour, and others as deemed necessary by supervision. Legal Disclosures and Conditions of Employment Drug-Free Workplace: This position is subject to pre-employment drug screening. All employees must comply with the company's Substance Abuse Policy as a condition of continued employment. At-Will Employment: Employment with Geo-Hydro Engineers, Inc. is at-will and may be terminated by either the employee or the company at any time, with or without cause or notice. Equal Opportunity Employer: Geo-Hydro Engineers, Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, or any other characteristic protected by law.

Controls Engineer Technical Lead wanted by Eagle Creek RE Management, LLC in Badin, NC. Lead the design, fabrication, installation, and commissioning of new control systems or the refurbishment of existing systems. Troubleshoot issues with existing systems to root-cause and work with operators in the field to optimize existing equipment. Analyze data from existing operations to design and optimize control systems. Implement standard SCADA systems across the fleet and maintain support of these systems for data gathering and analysis. Prepare specifications and other engineering documents to procure and install a wide variety of hydro-electric equipment and systems. Provide operations & maintenance recommendations for hydro-electric systems. Manage project implementation. Up to 30% travel for project supervision and execution. Job Requirements Requires: Bachelor's degree (or foreign equivalent degree) in Mechatronics Engineering or a closely related field, and 5 years of progressive, post-baccalaureate experience in a related occupation. Must have 5 years of CAD experience in electrical drawings including single-line diagram, schematics, block, and wiring among electrical industry standards, such as IEEE, ANSI, NEC, IEC, and ISO. Must have 5 years of experience in panel building and wiring, including testing (debug), installation and commissioning of electrical equipment in different systems. Must have 5 years of industrial automation experience, including PLC's and HMI's, controls networks, DeviceNet, ControlNet, and EtherNet. Any required experience may have been gained concurrently. Apply online at ******************************************** or send resume to [email protected] and list position title in Subject.

Job Description The Project Engineer oversees the planning and execution of small-scale electrical and mechanical projects, including estimating and tracking budgets. This role focuses on driving technical improvements in coordination with the Technical, Operations, and Strategic Projects teams. Responsibilities Lead and implement technical improvement projects within budget and timeline. Work with other departments and provide technical support as needed. Create and manage project charters with clear scope, tasks, and deadlines. Oversee project execution, including follow-up, documentation, and training. Use MS Office, CAD, and project management tools to complete tasks efficiently. Qualifications 2 to 3 years of experience in a Project Engineer role. Background in food processing or light industrial manufacturing is an advantage. Practical experience working with mechanical systems, pneumatics, hydraulics, electrical, and electronic components. Demonstrated ability to lead and manage project teams. Skilled in using CAD software, Microsoft Project, Excel, and PowerPoint. Well-versed in OSHA safety regulations and compliance standards. Bachelor's or Master's degree in Engineering, or equivalent technical training in electrical, electro-mechanical, or mechatronics disciplines. PMP certification is preferred; Lean Six Sigma Green Belt is considered an asset. Strong proficiency in written and spoken English. Additional language skills in Dutch, French, Spanish, or German are an advantage.

Watch this video to learn more about Pureflow! NC Project Engineer If you enjoy a variety of challenges, a healthy and productive work environment, and making an impact, then come join our team. Who We Are: Design, Build, Install High Purity Water Systems across a variety of industries Service and Customer Focused Team Oriented Experts in the Industry Strong Culture What We Offer: Work atmosphere that encourages teamwork, integrity, and excellence Training, tools, and support for employees' development Trajectory of personal and professional growth Market-competitive and experienced-based compensation Generous benefit package Who You Are: Strong mechanical aptitude or interests Are self-motivated Enjoy learning new technologies Find energy and joy in problem solving Familiar with mechanical components (pumps, valves, piping, flanges, etc.) Capable of handling multiple ongoing projects simultaneously Enjoy working independently and with a team Experience: 3+ years of experience working in an engineering or technical role S. in Mechanical Engineering, Industrial Engineering, Chemical Engineering Water treatment experience preferred but not required Job Responsibilities: Work with business developers, engineers, and shop personnel to develop preliminary equipment design plans and cost estimates for new products or refurbished equipment projects Design systems and size components; develop piping and instrumentation diagrams (P&IDs) Work with CAD designers to produce detailed engineering drawings Specify and work with purchasing to procure system components Prepare and oversee project documentation including drawings, spec sheets, O&M manuals, and validation documents Attend and support system start-ups, includes onsite operation, testing and troubleshooting of newly installed equipment Support with sales strategy, generate technical brochures, presentations and any other supporting documents needed for new project opportunities Benefits: 401(k) with matching Medical insurance Dental Insurance Short-term & Long-term Disability Insurance Health savings account Life insurance Paid time off Referral bonus program Tuition reimbursement Please visit ******************* to learn more about Pureflow: who we are and what we do. Pureflow is an equal-opportunity employer and requires post-offer, pre-employment background checks and drug tests on all positions.

Are you looking for a new challenge within engineering? Maybe this job as a R&D Engineer in Winston Salem, NC is for you! Amarr, part of global opening solutions leader ASSA ABLOY, is searching for an experienced R&D Engineer to design and develop various systems and components related to residential garage doors. Assignments will be broad in nature, usually requiring initiative, originality, ingenuity and excellent problem-solving skills. Essential Functions: Product designer for major Pre Product Innovation (PPI), New Product Innovation (NPI), and Continuous Product Innovation (CPI) development projects. Work closely with internal and external company design, application and manufacturing engineering resources, designing with system-wide perspective. Lead, participate in or support the following product development activities: Concept, planning, design and execution stages of major new products or product enhancements Risk assessment Prototyping and testing concept designs and initial engineering builds Pilot Production Design reviews Design verification testing Product validation and usability testing Pre-production Create and release Product Requirements, Design Specifications and Design Descriptions for assigned projects. Regular review of the competitive market and products, including interfacing with customers, as well as current and future market needs. Interact with global and internal design and manufacturing resources to design for manufacturability, reliability and cost-effectiveness. Qualifications and Requirements: Bachelor's degree in Mechanical Engineering or related. 5-7 years minimum experience in the design and development of manufactured products Experience working in cross-disciplinary teams. Experience with roll formed and stamped thin gauge steel and molded/extruded plastic and rubber component design AutoCAD Inventor, Solid Works experience Experience with rapid prototype design and build for proof of concept and usability testing a plus. Knowledge in the selection of various materials and adhesives along with experience designing roll formed, extruded, and molded components and product assemblies are key areas that will set apart potential candidates. Benefits include Medical/Dental/Vision, Paid Time Off, Paid Holidays from day one, tuition reimbursement, and a 401k plan (with an automatic 3% company contribution, regardless of your contribution) among others. Our goal is to be a world-leading company that attracts diverse talent, where all team members feel safe being their true selves and are able to thrive in a work environment that promotes change, innovation, and provides equal access and opportunity. As one of North America's leading garage door manufacturers, Amarr Company takes pride in fostering a culture where employees enjoy many opportunities for career growth, rapid advancement, and relocation to some of America's most desired cities. Although Amarr Company is an international business, employees enjoy a family-oriented, caring culture and rewarding work environment. Amarr Company offers competitive wages, generous benefits, and a bonus program for every employee. At Amarr Company, the door is always open and there is no ceiling to your career growth. #amarrcareers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Amarr is an E-Verify participant.

Piper Companies is seeking a Staff Backend Engineer to drive the development of reliable, scalable backend systems that power web and mobile experiences for learners worldwide. As a Staff Backend Engineer, you'll architect and implement APIs and services that enable seamless functionality across platforms. This is a full-time, hybrid position with a local office in Chapel Hill, NC Responsibilities for the Staff Backend Engineer include: * Design and deliver high-performance backend services using TypeScript and Node.js, ensuring robust architecture and comprehensive test coverage. * Build and maintain RESTful APIs that provide consistent functionality for multiple clients and applications. * Collaborate with product managers, designers, and engineers to translate business requirements into elegant technical solutions. * Lead technical discussions, define scope, and create scalable architectures that balance immediate needs with long-term growth. * Monitor system health and troubleshoot production issues, including optimizing MongoDB performance and coordinating with cloud infrastructure teams. * Promote engineering best practices through code reviews, mentorship, and continuous improvement initiatives. Qualifications for the Staff Backend Engineer include: * Bachelor's degree in computer science or equivalent experience. * 8+ years of backend development experience, primarily with TypeScript and Node.js. * Strong expertise in designing and maintaining RESTful APIs. * Hands-on experience with MongoDB or other NoSQL databases. * Familiarity with Go or Rust for backend development. * Experience tuning database performance (indexing, query optimization). * Knowledge of CI/CD pipelines and deployment automation. * Proven ability to lead projects from concept through release and maintenance. * Prior experience mentoring engineers and contributing to technical leadership. Compensation for the Staff Backend Engineer includes: * Salary range: $175,000 - $200,000 * Comprehensive benefits package including Medical, Dental, Vision, 401k, PTO, holidays, and sick leave as required by law. Keywords: backend, staff backend engineer, typescript, node.JS, RESTful APIs, API development, microservice architecture, MongoDB, NoSQL, databases, database optimization, query tuning, indexing, CI/CD, cloud infrastructure, server-side, scalable, go, rust, automated testing, infrastructure as code, IaC #LI-BH1 #HYBRID This job is open for applications on 1/23/2026 and will remain open for at least 30 days from the posting date.

The Lead Hydraulics Engineer provides advanced technical leadership, system architecture expertise, and front-line support for both internal engineering teams and external customer development. This role drives the design and optimization of custom hydraulic systems for off-highway mobile equipment collaborating closely with Applications Engineering, Controls Engineering, and the Advanced Systems Team. Role duties would include some industrial system development as well as our mobile hydraulics systems focus. The Lead Hydraulics Engineer serves as the primary hydraulics technical contact for Account Managers and OEM customers, supports quoting and feasibility assessments, mentors junior engineers, develops design standards, and ensures successful system performance through production troubleshooting and continuous improvement. This position requires strong communication skills, the ability to lead technical discussions, and the capacity to manage multiple concurrent projects while meeting deadlines and quality expectations. This role is expected to evolve into formal leadership of the Hydraulics Engineering team, including supervision of multiple direct reports and participation in resource planning and performance development. ESSENTIAL FUNCTIONS * Design and optimize mobile hydraulic systems, producing schematics & circuits, and fabrication drawings for internal production and suppliers. * Support pre-sale feasibility, BOM development, and quoting, while providing technical guidance to engineering peers, sales, production, and customers. * Lead design reviews and perform component sizing, performance calculations, validation, troubleshooting, and optimization during prototype and production phases. * Contribute to hydraulic design standards, maintain knowledge of relevant regulations and industry practices, and participate in customer visits, field testing, and equipment evaluations as needed. ADDITIONAL RESPONSIBILITIES * Serve as the organization's primary hydraulics SME, mentoring junior engineers in design methodology, troubleshooting, and component selection. * Interface with Account Managers to support sales opportunity qualification and provide structured production support with feedback loops for continuous improvement. * Collaborate with Controls Engineering and the Advanced Systems Team to ensure proper integration of electrohydraulic controls and evaluate emerging technologies (e.g., smart valves, electrification). REQUIRED QUALIFICATIONS * Deep understanding of hydraulic components and system architectures, including load-sense, open-center, closed-center, and multi-function flow management. * Experience with mobile valve platforms and manifold circuit design (including DIN cartridge manifolds, stackable valve systems, and integrated hydraulic control assemblies), with competency in manifold block layout, optimization, and manufacturability. * Familiarity with electrohydraulic controls, CANbus interactions, performance curves, and the ability to troubleshoot systems using diagnostic tools and measurement instrumentation. * Proficiency in CAD/3D modeling for schematic and manifold design (Autodesk Inventor, AutoCAD, HydroSym/HydroMan), with knowledge of relevant manufacturing processes (machining, welding, hose assembly, etc.). PREFERRED QUALIFICATIONS * 7-12 years of experience designing hydraulic systems for mobile or off-highway equipment, including support of OEM production volumes. * Prior leadership experience providing mentorship or directing technical work, with exposure to electrification, hybrid integration, etc. * Knowledge of reservoir optimization, thermal management, noise mitigation strategies, and related system performance considerations. REQUIRED FUNCTIONAL COMPETENCIES * Strong analytical and troubleshooting skills with the ability to identify root causes, recommend corrective actions, and translate customer requirements into functional system architectures. * Effective prioritization and time-management in multi-project environments, with solid understanding of engineering change control and revision management. * Strong communication skills, capable of presenting complex technical topics to non-technical stakeholders and interpreting mechanical, hydraulic, and electrical schematics. * Collaborative mindset with team-building instincts, contributing positively to cross-functional work and organizational culture. PHYSICAL & MENTAL REQUIREMENTS * Ability to work in both office and shop environments, including exposure to machining, fabrication, and assembly noise, and occasional lifting of components up to 40 lbs during prototype evaluations or commissioning activities. * Comfortable standing, bending, and reaching while reviewing equipment or troubleshooting systems, with the ability to maintain focus and meet deadlines in high-pressure environments. * Ability to travel to customer sites, vendor facilities, and job locations as required (typically < 20%).

Reynolds American is evolving at pace into a global multi-category business. We are on a mission to decrease the health impact of our industry. To achieve our ambition, we are looking for colleagues who are ready to Be The Change. Come, join us on this journey! REYNOLDS AMERICAN has an exciting opportunity for a Sr Facilities Engineer, in Winston Salem, NC Your key responsibilities will include: Manage third party Facilities Management group. Work both in a team environment and independently to identify facility and process issues, determine possible solutions, evaluate costs and benefits of the credible alternatives, choose the appropriate resolution, and implement while working in an operating manufacturing environment. Act as a technical resource supporting project teams and maintenance organizations within the Corporation providing leadership and direction relative to mechanical or electrical concerns. Work with outside contractors and vendors to estimate, schedule and implement projects. Develop RFPs, specifications and bid packages, determine list of qualified contractors, evaluate bids and oversee execution of the resulting contracts. Participate in facility maintenance operations to insure protection of company assets. Proactively evaluate mechanical or electrical systems to judge remaining useful life and determine appropriate schedules and budgets for replacement to ensure integrity of building conditions and power supply. Lead design of new systems as required. Responsible for technical assignments that further develop engineering skills usually under supervision of a more senior technical staff. Independently evaluate, select, and apply standard engineering techniques, procedures, and criteria using experience and judgment in making adaptations and modifications. Lead assignments that have clear and specified goals. What are we looking for? Background in Mechanical or Electrical Engineering Experience Leading or coordinating the work of others including contractors, vendors and consultants. Project management skills with the ability to lead or support the execution of projects. Demonstrated ability to lead a cross functional team. Demonstrated ability to work efficiently, be pro-active, and communicate effectively with team members and management. Demonstrated ability to perform with urgency. Ability to Independently evaluate, select, and apply standard engineering techniques, procedures, and criteria using experience and judgment in making adaptations and modifications. Bachelor of Science Degree in Mechanical or Electrical Engineering with +2 years of progressive experience or; Associate Degree in Engineering in related field with 7+ years progressive experience. WE ARE REYNOLDS AMERICAN-A member of the BRITISH AMERICAN TOBACCO GROUP At Reynolds American, we are committed to our Purpose of creating A Better Tomorrow. This is what drives our people and our passion for innovation. See what is possible for you at REYNOLDS AMERICAN. Global Top Employer with 53,000 British American Tobacco employees across more than 180 markets Great Place to Work Certified Brands sold in over 200 markets, made in 44 factories in 42 countries Newly established Tech Hubs building world-class capabilities for innovation in four strategic locations Diversity leader in the Financial Times and International Women's Day Best Practice winner Seal Award winner - one of 50 most sustainable companies WHY JOIN REYNOLDS AMERICAN? We're one of the few companies named as a Global Top Employer by the Top Employers Institute - certified in offering excellent employee conditions. Collaboration, inclusion and partnership underpin everything we do here. We know that embracing talent from all backgrounds is what makes us stronger and best prepared to meet our business goals. We see the career breaks as opportunities not obstacles. Through The Global Returners program, we support professionals looking to restart their careers after an extended absence from the workforce (e.g. time out caring for family, parental leave, national service, sabbatical and/or starting your own venture). Come bring your difference and see what is possible for you. Learn more about our culture and our award winning employee experience here . BENEFITS OVERVIEW Benefit Information The following is a general summary of the competitive compensation and benefit plans we offer: 401(k) plan that offers opportunity to save on pre- and post-tax basis up to 50 percent of eligible compensation. Company matches 100 percent of employee pre-tax/Roth (401k) contributions up to six percent Company contributes an additional three percent to 401(k) whether employee participates or not Comprehensive health- and welfare-benefits package (including medical, dental, vision, and prescription drugs) Health Savings Account start-up contribution for employees who elect the high deductible health plan Flexible spending accounts for both Health Care and Dependent Care allowing employee to use pre-tax dollars to pay for qualified expenses during the calendar year Employee assistance program offering 8 free counselling sessions, per issue, each calendar year for employees and their dependents Company paid life insurance of 1x annual base pay ($50,000 minimum) Company paid accidental death or dismemberment insurance of 2x annual base pay ($50,000 minimum) Voluntary insurances offered at group rates: employee and dependent life insurance, AD&D insurance, critical illness, accident coverage, disability buy-up, and auto & home insurance Tuition reimbursement and student loan support Dependent Scholarship Programs Free confidential personal financial counselling service On-site health centers and 24/7 fitness centers at certain company locations A charitable giving matching grants program that enables employees to direct and double their donations to qualifying charitable organizations of their choice Health-care concierge service Volunteer service opportunities Extensive training opportunities Company vehicle for eligible employees Mobile phone allowance for eligible employees Paid Leave: Sick and Personal Time (exempt employees may be excused with pay for brief absences; non-exempt employees receive up to 6 days) Vacation (levels Below Senior Director receive 15 days (pro-rated during first year of service); Senior Director and Officers receive 25 days (pro-rated during first year of service)). Holidays (Nine company recognized and two annual personal holidays to be used at the employee's discretion) Paid Parental Leave + temporary reduced work schedule opportunity Funeral Leave Short-Term Disability Leave Long-Term Disability Leave Jury Duty Leave Military Leave Released Time for Children's Education Community Outreach Leave Other paid leave benefits, as required by state or local law Your journey with us isn't limited by boundaries; it's propelled by your aspirations. Join us at Reynolds American and become a part of an environment that thrives on internal advancement, where your career progression isn't just a statement - it's a reality we're eager to build together. Seize the opportunity and own your development; your next chapter starts here. You'll have access to online learning platforms and personalized growth programs to nurture your leadership skills We prioritise continuous improvement within a transformative environment, preparing for ongoing changes Our organization offers a level of challenge, responsibility, and creativity for motivated employees who want to grow their careers. We are also committed to employing a diverse workforce and valuing different perspectives, experiences, and talents to improve the company's potential for optimally achieving its business objectives! Reynolds American Inc. and its affiliated companies is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status, or any other characteristic protected by applicable law. Only applicants requiring reasonable accommodation for any part of the application and hiring process should contact us directly via email at **************************.

The Systems Engineer is responsible for the proactive administration of the hardware platforms, operating systems and the dependent services for LFUSA. This includes the configuration, installation, deployment, monitoring and troubleshooting of server hardware, operating systems, and services, resolving outages and documenting designs, processes and procedures. Knowledge, Skills and Abilities Required: 3-5+ years of experience in the IT related industry 3-5+ years of operational systems and support experience in a large, dynamic TSM environment Advanced knowledge of back-up strategies and data loss risk remediation Strong operational knowledge of Microsoft Server platforms and technologies including Windows Server 2003/2008/2012, Citrix 4.X-5.X, IIS, DNS, and DHCP Strong operational knowledge of Redhat Linux and VM Linux Strong operational of storage methodologies including IBM v series, Netapp Strong working knowledge of the installation, configuration, recovery, SRM and administration of VMware ESX Server 4.X, 5.X in a large enterprise clustered/high availability environment Demonstrates commitment to providing customer focused quality service Proven ability to work in both a team environment and independently Experience with MS Exchange 2010 DAG's and application disaster recovery methodologies Some travel may be required Qualifications: Bachelors' degree in Computer Science, Information Systems preferred 3-5+ years hands on experience with Microsoft Windows 2003/2008/2012 as a Systems Engineer preferred 3-5+ years of hands on experience with Linux OS 3-5 years of hands on experience with Storage Systems administration 2+ years hands on experience with VMware ESXi 4.x/5.x Experience with 200+ VM's Experience with 100+ physical Intel based servers (preferably IBM X-Series) Excellent communications skills both written and verbal Ability and availability to work occasional nights/weekends assignments as necessary Additional Information Send me your resumes at vince@alphait. us Pozdrawiam / With best regards, Alpha Technologies Inc (USA) Vince Taylor Sr Technical Recruitment Specialist

Basic Qualifications Requires a Bachelor's degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience. Agile experience preferred. CLEARANCE REQUIREMENTS:: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a systems engineer in this unique role, you'll help engineer the brains behind the brawn for ships, submarines, undersea networks and other advanced defense systems. We encourage you to apply if you'd like to experience a variety of different product families and locations. What sets you apart: Highly flexible and willing to quickly adapt to new teams Clear understanding of systems engineering concepts, principles, theories, and technical standards Clear understanding of requirements management and system modeling tools Creative thinker with ability to grasp and apply new information quickly and handle increasing responsibilities with growing complexity Team player who thrives in collaborative environments and revels in team success Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: Due to the nature of this position, 75-80% travel may be required to support work at various GDMS sites. When not supporting work at other sites, you will be a part of the McLeansville, NC engineering team. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $90,833.00 - USD $100,767.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans