Senior engineer jobs in Mobile, AL

We are currently seeking an Avionics Engineer for a long-term, indefinite contract to perform full design and implementation of avionics systems for a CASA 212 upgrade. The role involves creating wiring diagrams and harness diagrams using AutoCAD, performing electrical load analysis, developing test procedures, and creating ICA (Instruction for Continued Airworthiness) documentation. This position also requires collaboration with Technicians on the shop floor for the implementation of designs. Responsibilities * Provide engineering services for the support of the C212, CN235, and C295 aircraft operating in the U.S. * Design and certify avionic systems in 14 CFR Part 25 aircraft. * Generate and review wiring drawings, wire routing schematics, electrical load analysis, technical reports, and other technical publications. * Assist in the development of Certification plans, Test Procedures, ICA, AFMS, and Service Bulletins for new and existing projects. * Develop documentation for new STC and non-STC avionic systems installations. * Assist the production team with installations and troubleshooting of avionic systems. * Assist in component repairs by generating instructions as needed. * Act as a liaison between Airbus Military Spain and Airbus Military North America. * Develop methods for uniform publication of document changes. * Support protocol communications using digital buses. * Act as a positive role model in all aspects of professional performance. * Observe safety procedures and personnel policies. Essential Skills * Bachelor's Degree in Engineering (Electrical/Avionics or Aeronautical/Aerospace) or equivalent experience. * Minimum of 5 years of experience in aerospace engineering. * Knowledge of Aircraft Systems and FAA 14 CFR. * Experience with AutoCAD. * Experience with electrical load analysis. * Ability to interpret drawings and specifications of Airbus Military aircraft. * Proficiency in MS Project, MS Office Suite, and various CAD programs. * Ability to communicate effectively with leadership, customers, and Technicians. Additional Skills & Qualifications * Knowledge of EASA Certification Specifications (CS) is beneficial. * Highly organized individual capable of working with limited supervision. * STC (Supplemental Type Certificate) experience is a plus. * Integrity-driven professional ensuring high-quality work. * Experience in interacting cordially and productively with subordinates, co-workers, supervisors, and customers. Work Environment This position is based in an office/hangar environment. The typical shift is Monday to Friday, from 7:00 AM to 4:30 PM Monday through Thursday, and 7:00 AM to 2:30 PM on Friday. Overtime may be required as needed. Travel is less than 25% domestic and international. Candidates must be authorized to work in the US. Pay and Benefits The pay range for this position is $50.00 - $70.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mobile,AL. Application Deadline This position is anticipated to close on May 8, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

We are seeking a highly skilled Electrical Engineering Leader to provide expert technical guidance and oversight of the electrical engineering group. This role involves managing an industrial engineering team to deliver a variety of industrial design projects for the chemical, power, utilities, and manufacturing industries. The ideal candidate will have experience with designing and retrofitting industrial power distribution systems and substations. Additionally, the candidate should possess strong leadership skills and the ability to drive innovation in electrical engineering practices. Preferred locations include: Wadsworth, OH; Columbus, OH; Pittsburgh, PA; Philadelphia, PA; as well as CDM Smith offices located in New Jersey, New York, Virginia, and Georgia. Key Responsibilities: Team Management: Manage and supervise an industrial engineering team, providing technical guidance, training, and mentorship to junior staff. Technical Oversight: Independently oversee and provide expert guidance on complex electrical system designs to meet client project requirements. Compliance Review: Review draft designs for compliance with federal, state, and local regulations, and sign off on completed designs. Policy Adherence: Ensure all designs follow firm policies, quality, and practices. Site Reviews: Perform site reviews and studies to ensure designs align with location specifications, updating design requirements as necessary. Knowledge Contribution: Develop white papers and technical design documentation for new or special case designs, and submit technical papers for publication in journals. Proposal Collaboration: Work with sales staff to create proposals in response to RFPs, ensuring adherence to regulations and best practices. Client Engagement: Meet with current and potential clients to review their design needs and provide technical guidance. Industry Visibility: Attend conferences and symposia to enhance the visibility of the firm's products and services. Primary Contact: Act as the main point of contact for external clients and industry contacts, collaborating with clients and government officials to clarify technical questions. Project Updates: Provide updates to project management as necessary. Mentorship: Mentor junior staff to develop their skills and prepare them for future growth within the firm. **Job Title:** Electrical Engineering Leader **Group:** IND **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. Professional engineering (PE) license. 15 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. **Preferred Qualifications:** Ability to supervise the work of others. Proven experience leading a team of industrial electrical engineers Understanding of FEL, FEED delivery process Experience with progressive design build and design build delivery methods. Strong communication and organizational skills Ability to obtain licensing in multiple states Ability to provide detailed engineering estimate Ability to maintain project budget and schedule **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Excellent verbal and written communications skills. Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.). Expert knowledge of federal, state and local regulations. Expert knowledge of engineering design tools including power system studies Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $133,016 **Pay Range Maximum:** $246,043 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Who We Are Hargrove supplies unparalleled services in engineering, procurement, construction management, and technical services in the industrial, commercial, and government sectors. With over 2,700 Teammates in 19 offices domestically and internationally, we build long-term support relationships in the energy generation, manufacturing, research and development, and process-heavy industry in on-site support arrangements, in plant-level small projects and consulting roles, and in larger capital projects. Hargrove's key operating principle is to provide the Right People, in the Right Place, at the Right Time. We believe that relationships and partnering together provide the best results and long-term benefits for our clients. Work-life balance and flexibility are important areas of focus for Hargrove. We're happy to discuss flexible working hours, patterns, and locations to suit you and the business. important areas of focus for Hargrove. We're happy to discuss flexible working hours, patterns, and locations to suit you and the business. What You'll Be Doing Job Scope: Generally responsible for performing all aspects for complete designs of small and large mechanical engineering assignments using theoretical knowledge and practical design methods. This work will be performed under general supervision. Primary responsibilities will include but not be limited to: Familiarity with and utilizing department design and drafting standards. Familiarity with project scope, specifications and design criteria upon assignment to a project task team. On-site assistance during startup. Accomplishing engineering activities such as stress analysis, construction specifications, material procurement specifications, calculations and piping estimates. Developing conceptual layouts and cost studies as necessary to determine the simplest, most efficient approach to solving engineering tasks at hand. Producing estimate level preliminary designs and material take-offs suitable for the level of the estimate being performed on a project. Producing detail design calculations and sketches for materials of construction associated with the project. Calculations produced will be neatly prepared and organized for efficient checking by others and efficient use by drafters/designers for preparing drawings and as a deliverable when required. Assisting the drafting group in resolving routine layout and detailing problems. It is your responsibility to furnish sufficient sketches and details necessary for completion of engineering drawings. Consulting with design leaders from other disciplines to ensure the smooth flow of vital information necessary for the scheduled completion of the project. Reviewing and checking vendor drawings and other discipline drawings for mechanical input. Producing designs with efficient use of construction materials with an overall emphasis on ease of construction and completed product meeting the expectations of the client. Checking calculations made by other engineers to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice. Advising the senior engineering concerning design or scope changes, which have been identified. Assisting other engineers in developing and assembling scopes, drawings and specifications into a “package”, enabling mechanical purchase inquiries to be issued for procurement of equipment, materials or subcontract pricing. Developing construction specifications. Reviewing fabrication drawings and other construction submittals for conformance to engineering drawings and specifications. Performing fieldwork necessary to gather field data, check tie-ins and provide construction support. Provide technical guidance to less experienced drafting and engineering personnel in the department. Applying advanced engineering techniques and analysis to complex designs. Developing small work sharing packages for interoffice execution support. Ideal Background Education: Bachelor or Master of Science degree in Mechanical Engineering from an accredited university is required. Registration: Professional Engineering registration is highly preferred. Experience: This position requires 5+ years of relevant industrial experience in mechanical engineering. Required Knowledge, Skills, and Abilities: Knowledge of design standards and codes. Knowledge, application and specification of piping materials. Development of piping material and material procurement specifications. Knowledge of good design practices for sizing all piping systems. Sizing of compressible fluid piping systems. Flexibility and stress analysis of moderately complex piping systems. Specify criteria for and select piping specialty items. Design of moderately complex process and utility piping systems. Knowledge of manual valve sizing, use and application. Knowledge of application of piping supports and restraints. Identification of need, application and specification of safety valves and devices to maintain the mechanical integrity of piping systems. Identification of need, application and specification of steam traps and liquid drainers. Estimating piping related construction quantities from conceptual documents. Knowledge of other disciplines deliverable development to ensure coordination of design efforts. Knowledge and application of company engineering design and CAD drafting standards. Knowledge of the discipline specific methods, practices and techniques required to engineer, design and construct process and manufacturing projects. Proficient in the use of Microsoft Word, Excel and Outlook. Excellent communication skills, both verbal and written. Excellent presentation skills. Virtual team skills and cross divisional relationships are developed and able to provide interoffice execution support with general supervision. Physical Requirements: Ability to sit, stand, or walk for long periods of time. #LI-BH1 Hargrove Culture We work to create an environment founded on trust, personal integrity, and a “team mentality” so that each person understands the value of their contributions both on a project and company-wide level. We know that each person on our team contributes to the success of our company by pairing expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our safety culture protects and promotes the well-being of every person who works with us and every person touched by our work. As a 100% Teammate owned company, we proudly offer a comprehensive benefits package including, paid holidays, personal paid time off, medical, dental, vision, life, and disability insurance, 401(k), and other benefits to eligible Teammates. Equal Opportunity Employment Statement Hargrove is an Equal Opportunity/Affirmative Action employer. We do not discriminate based upon race, color, national origin, religion, age, sex (including gender, sexual orientation, pregnancy, sexual identity, marital or family status), disability, military service or obligations, veteran status, or any other characteristic protected by law. Hargrove is a drug-free workplace. The selected candidate must be authorized to work in the United States.

Job DescriptionØ Drive mechanical assets to 100% availability to meet the unit's daily production goals.Ø Zero unplanned equipment down timeØ Drive performance to the levels which we believe are our “Entitlement” using behaviors, tools and skills and support the Core Values in every aspect of the job.Ø Outstanding safety performanceØ Absolute environmental complianceØ Engineer innovative and practical solutions to maintenance, reliability, and operational issues.Ø Consistent product quality, proper design and documentation of the asset care plans and use of Six-Sigma tools to continually improve maintenance, reliability, and production.Ø Design and implement innovative upgrades to both maintain performance levels through PM's, predictive maintenance and improve overall reliability and maintainability through projects.Ø Leadership· Demonstrates leadership in driving Zero-incident safety culture.· Implement established maintenance and reliability strategies.· Identify needed maintenance technician training and procedure development.· Identify and implement Cost Improvement and Cost Avoidance opportunities.Ø Processes· Respond to equipment failures and ensure that the daily production goals are achieved.· Support maintenance and capital replacements, repairs, and overhauls to mechanical equipment assets, including rotating & stationary equipment.· Write maintenance procedures, job plans and repair plans.· Document equipment failure history and costs using SAP and OEE data.· Perform routine mechanical equipment troubleshooting.· Perform repair vs. replacement analysis on equipment.· Perform equipment root cause failure analysis.· Scope out and implement equipment replacement and upgrade projects.· Perform Asset Management duties for equipment including maintaining files and database for equipment data, ensure standardization of equipment and standards for equipment, and organize and manage spare inventories as part of the overall asset care strategy for the assets.· Coordinate proactive fixes from Condition Monitoring findings with operations and maintenance personnel.Ø TEAM· Reports To: Mechanical Reliability Manager QUALIFICATIONS / REQUIREMENTSv Bachelor of Science Degree in Mechanical Engineeringv Minimum 3+ years post grad experiencev Prior Chemical, Plastics or Refining industry experience preferred.v Fixed Equipment trouble shooting and specification.v Experience with modeling tools such as Fathom, Compress, Aspen or Solidworks.v Excellent communication skills, both written and oral.v Self-motivated, well organized, and possess strong interpersonal skills.v Willingness to perform “hands on” field work, including testing and troubleshooting.v Knowledgeable with respect to Microsoft Outlook, Excel, and PowerPoint software programs.v Must have excellent time management skills and be able to multi-task effectively.v Ability to travel (typically Engineering exam. v Professional engineering registration preferred but not required.v CMRP, Vibration Analysis Lev 1, Pump and Mechanical Seal Training Courses, API Certs preferred.v Knowledge of MI section of PSM Compliance E04JI800n8pv407m1i3

Thompson Engineering has an immediate opening for a Transportation Project Engineer to join our growing team in one of our offices located in Mobile, Daphne or Orange Beach, AL. Enhance your engineering career with a company that aspires to be the firm of choice by driving success with our clients, employees, and communities. At Thompson Engineering, we offer a wide range of services to a growing list of clients across multiple markets throughout the Southeast. At Thompson, we aim to make the communities we live and work in better by providing our services in alignment with our core values: integrity, safety, performance, ownership, teamwork, innovation & entrepreneurial spirit, and professionalism. We have a work environment and company culture that allows self-driven engineers to gain valuable experiences and develop technical proficiencies needed for a successful and rewarding career. As an employee-owned company, we also seek to offer competitive compensation packages and employee benefits. Description This position is for an aspiring and motivated engineer with 5-10 years' of roadway design experience on local and/or state transportation projects and is seeking opportunities for growth into a project engineer position. The ideal candidate will exhibit qualities needed to assume a lead design role on road and bridge projects. This position requires knowledge of all aspects of geometric roadway and roadside design needed for the development of roadway plans for state and local clients in Alabama. Immediate benefits of this position include offering interested candidates the opportunity to develop client relationships and represent the company in professional trade organizations. Long-term benefits of this position may include growth opportunities into a senior management position overseeing and developing other engineers and managing multiple projects. We have a multi-disciplined team of engineers, surveyors, and environmental scientists which this position will coordinate and communicate with regularly. Your Role As a transportation project engineer, you will work closely with team leaders and support staff to perform a variety of tasks needed to produce quality designs and plans on road and bridge projects throughout the Southeast. Regular duties will include the following: * Preparing preliminary design studies, project planning, and related activities that lead to the design of a project. * Preparing project specifications, cost and material estimates, reports, and engineering studies. * Preparing design, detail, and layout drawings and design sketches. * Planning and adhering to task and submittal schedules and project budgets to ensure timely and cost-effective completion of projects * Following company policies and procedures regarding safety and quality. Minimum Requirements * A bachelor's degree in civil engineering * 5-10 years' experience * Alabama PE, or ability to obtain such, required * Proven experience with ALDOT design methods, plan preparation, standards and specifications required * Proficient with MicroStation, InRoads, and other related Bentley products * Knowledge of OpenRoads is desired * Knowledge of drainage design and applicable software is a must * Ability to manage client expectations, project schedules and budgets * Ability to mentor and train entry-level engineers * Ability to communicate clearly, both oral and written * Ability to work in various work environments, both outside in the field and in an office for extended periods of time This position offers a competitive compensation package, including a sign-on and/or relocation bonus to qualified candidates. Baldwin County is a fast-growing county with 4 of the 5 fastest growing cities in the state and a diverse range of communities to call home. Physical Requirements * Must be willing to work flexible schedules and overtime as needed by the department needs. * Must be able to operate a computer and sit for long periods of time. * Ability to wear appropriate PPE for hazardous materials. * Must have a valid driver's license and be able to drive company vehicle if needed. About Us Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for a Robotics Engineer to join our Final Assembly Line Engineering Department based in Mobile, AL. The Robotics Engineer is responsible for supporting operations needs pertaining to robots and automated industrial assets deployed within the Airbus Mobile manufacturing site. They maintain machines, propose industrial improvements, work closely with all engineering principals and with Airbus Robotics to monitor the status and implement solutions that sustain and increase the reliability and efficiency of the machines at aircraft production facilities. Meet the team: Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery - working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health & safety - along flowlines and flightlines. Join our team and watch our aircraft come to life. Your working environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”). Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities: Ensure the continued operation of robotic and other automation systems onsite, including preventative maintenance, diagnostics, and continuous improvement. Perform root cause analysis of failures, and propose remediation in a timely fashion with effective countermeasures Analyze customer feedback including warranty requests and generate prioritized actions to address shortcomings associated with the Mobile Manufacturing Site (MMS). Monitor customer satisfaction and machine performance. Perform troubleshooting and repairs in MMS. Perform application programming on specialized platforms with applications in automation and robotics. Serve as a liaison between Airbus operations and Airbus Robotics to resolve problems and inquiries. Where necessary provide basic training for the operators. Support early concepts of corrective designs and thoroughly test them with the Original Equipment Manufacturer (OEM). Help develop a strategy for the verification of the corrective designs and participate in verification activities. Level 2 is indicative of knowledge that can be applied with guidance or supervision. Exercises discretion and independent judgment in the application of specialized knowledge on work that is predominantly intellectual and for which the output produced or the result accomplished cannot be standardized in relation to a given period of time. Embraces company culture and values through exemplary execution and behavior. Contributes to company technical strategy. Holds themselves and others accountable. Guides and trains more junior members of the team. Troubleshoot and resolve electromechanical issues. This includes work with tools such as DMMs, oscilloscopes, etc. Will perform hands-on work to maintain robotics and automation. Maintain expert level of product knowledge and application. Assist in the design and development of new products and tools and provide support for various engineering design activities within the Airbus Operations scope. Travel domestically to OEM sites to perform training if needed. Maintain service records or documentation of equipment or systems. Establish and maintain positive customer relationships. Travel Required: 20% Domestic and International Willing to make extended trips (1-3 months) to Airbus Robotics HQ in Seattle for initial extensive training. Your boarding pass: Required: Eight or more years of relevant experience OR, Four or more years of experience with a Bachelor's degree OR, Two or more years of relevant experience with a Master's Degree. Required: Troubleshooting electromechanical problems, identifying the most likely faults in the mechanical, electrical or software depending on the fault. Able to execute day-to-day work safely and without instruction or guidance. 4+ years' experience testing and troubleshooting in Robotics or Industrial automation. Train customers and colleagues in maintenance and operation activities Be driven to achieve customer satisfaction including qualities such as responsiveness, quality, and on time delivery. Demonstrated troubleshooting and root cause analysis skills. Tenacious problem solver organized and detail oriented. 5 years of industrial experience, preferably in the Robotics industry. Proficiency with machine shop tools: drill press, lathe, sanders, and band saw. Working knowledge of the following platforms: Windows 7 desktop and Linux embedded products. The knowledge and interpersonal capability to work within an engineering development team that spans multiple disciplines (electrical, software, mechanical, systems engineering). Excellent skills with typical productivity tools such as Microsoft Office and Google Docs. Preferred: Motor tuning procedures for many classes of motors, especially DC brushless servos and associated PID tuning for point-to-point and free-running applications. This includes the ability to troubleshoot poorly performing motor systems and apply solutions through improved tuning parameters or techniques. Embedded system development including: circuit board development and troubleshooting, commercial microprocessor platforms and architectures (e.g. ARM), and memory management. Mechanical and electrical design tools such as Solidworks, Catia, Altium, etc. Safety risk assessments including: identifying risks, and appropriately mitigating those risks according to required performance levels. PLCs and safety controllers, especially Siemens products Electromagnetic Compatibility, including emissions and immunity. Researching and selecting appropriate sensors for a given electromechanical design. Knowledge of standards such as ISO 9000. Required: Excellent verbal and written English skills. Ability to communicate quickly, clearly, and concisely. Provide professional, consistent, calm, clear and confident oral and written communication. Works well in high pressure situations, during tight deadlines, and in front of customers. Knowledge of ASTM standards and testing methods. Beneficial: French, German. Physical Requirements: Onsite: 100% Vision: Able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: Able to speak in conversations and meetings, deliver information and participate in communications. 100%, daily. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. 100%. Carrying: Able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools. Sitting: Able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving. Standing: Able to stand for discussions in offices or on the production floor. Travel: Able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing. Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: On-site Job Family: Manufacturing Engineering ------ ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

The Associate Engineer or Engineer I is a recent graduate with a bachelor's degree in engineering who is responsible for supporting and executing engineering projects. The Associate Engineer will work closely with other engineers, technicians, and researchers to develop products and technologies, improve products and processes, and solve engineering problems. This includes the design, testing, and certification of components, engines, and aircraft. ESSENTIAL DUTIES AND RESPONSIBILITIES: Creates clear, concise, inspectable, and manufacturable design data according to company standards, related specifications, engineering principles, customer, and regulatory requirements. Understands when it is appropriate to use GD&T, but biases towards standards. Creates clear, concise, and complete documentation including all required sections and content. Creates change requests and notices, sometimes with help from more senior staff. Creates change notices including stock lists, object associations, and attributes in accordance with standards. Provides clear and concise project status, progress reports to the customer, project team, and management. Is aware of common analysis methods and their application such as failure, pareto, materials, stress, fatigue, and Finite Element Analysis (FEA). Creates requirements and uses systematic verification and validation techniques to identify issues associated within a single change or requirement. Can gain context within the product development lifecycle with help from more senior engineers. Is aware of overall product architecture and engine theory. Understands the importance of security including protection of intellectual property, import and export compliance. ADDITIONAL INFORMATION Include any other information that will aid in the preparation of an accurate description of this job. Qualifications Bachelor's degree in engineering 0-2 years of experience in a relevant engineering field. Strong understanding of engineering principles and theories Excellent problem-solving and analytical skills Strong communication and interpersonal skills Ability to work independently and as part of a team Ability to meet deadlines and budget requirements Available Travel ~10% Desired Qualifications Familiarity with reciprocating engines, preferably aviation applications. Pilots license Engineer In Training (EIT or Fundamentals of Engineering Exam) Master's Degree in Engineering 3+ years of experience in a relevant engineering field Experience in a leadership role Experience with project management Experience with lean manufacturing Experience with Six Sigma PHYSICAL REQUIREMENTS: Ability to sit or stand for extended periods of time. Ability to lift 20 pounds. Ability to traverse the shop floor.

Description & Requirements The Sr. Cloud Engineer is a hands-on position that requires the ability to plan, design, and implement technical cloud solutions. You will help combine software and systems to develop creative engineering solutions for streamlined operations. Much of our support focuses on optimizing legacy systems, deploying new infrastructure and cloud services, and reducing work through automation of legacy processes. You will join a dedicated team of professionals with a diverse set of experiences and skills. In this environment, you will take a hands-on lead for the dedicated support team, supported by a larger matrixed IT organization. This is a remote position. Essential Duties and Responsibilities - Work with development teams throughout the software life cycle ensuring sustainable software releases. - Perform hands on management of cloud infrastructure and automation tools. - Document cloud architecture, security measures, and participate in client audits. - May provide guidance, coaching, and training to other employees within job area on automation technologies, and collaborate with other cloud support teams that support the overall organization. - Serve as the primary technical point of contact for all cloud services consumed by the business. - Lead performance testing, chaos engineering, and remediation efforts for continual improvement. Job-Specific Essential Duties and Responsibilities: - Embrace and advocate a DevOps mindset - Troubleshoot major incidents, facilitate blameless post-mortem RCA documentation - Work with development teams throughout the software life cycle ensuring sustainable software releases - Perform analytics on previous incidents and usage patterns to better predict issues and take proactive corrective action - Build and drive adoption for greater reliability, resiliency, and scalability of our production applications, while maintaining a cost conscience approach - Lead and participate in performance tests; identify bottlenecks, opportunities for optimization, and capacity demands - Lead and participate in disaster recovery tests for the environments you manage - Perform hands on management of cloud infrastructure and automation tools - Document cloud architecture, security measures, and participate in client audits - Mentor and train other members of the dedicated DevOps team and collaborate with other cloud support teams that support the overall organization - Understanding cloud security best practices and work with security teams to design and implement a security plan - Serve as a technical point of contact for all cloud services consumed by the team, and communicate any new enterprise standards or best practices to be adopted by the DevOps teams - Participate in the 24x7 support coverage as needed Critical Soft Skills: - Excellent interpersonal skills to interact with customers, peers, and executives - Excellent organization and communication skills, both written and verbal - Ability to multi-task and to prioritize rapidly changing client demands, in a fast-paced and deadline-oriented environment - Ability to work well both independently and in teams Minimum Requirements - Bachelor's degree in relevant field of study and 5+ years of relevant professional experience required, or equivalent combination of education and experience. Job-Specific Minimum Requirements: - Bachelor or master's degree from an accredited college or university in Computer Science, Information Technology, or a related field. Equivalent experience considered in lieu of degree - Technical proficiencies include Terraform, Linux/Bash scripting, Github, and Jenkins. - 8+ years of overall IT experience - 5+ years of hands-on experience in a major cloud provider (Azure, AWS, Google, Oracle) - 2+ years of hands-on AWS experience - 3+ years of scripting/automation experience - Working knowledge in scripting languages and automation tools (JSON, Python, Ansible, GitHub, CodeShuttle) with respect to managing deployment automation - Advanced knowledge of infrastructure components (networking, load balancing, cloud services, orchestration tools, containerization, compute, and storage systems) - Working knowledge of Windows and Unix based operating systems - Familiarity with Splunk, AppDynamics or other monitoring tools - Experience in a client facing production support environment Preferred Skills and Qualifications: - Cloud Certifications Desired (ranked by preference) - AWS DevOps Engineer Professional - AWS SysOps Admin - Associate - AWS Solutions Architect - Associate or Professional - AWS Developer - Associate - SAFe Certifications Desired (not required) - SAFe Practitioner - SAFe DevOps Practitioner #techjobs #veteranspage #C0reJobs EEO Statement Maximus is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. Pay Transparency Maximus compensation is based on various factors including but not limited to job location, a candidate's education, training, experience, expected quality and quantity of work, required travel (if any), external market and internal value analysis including seniority and merit systems, as well as internal pay alignment. Annual salary is just one component of Maximus's total compensation package. Other rewards may include short- and long-term incentives as well as program-specific awards. Additionally, Maximus provides a variety of benefits to employees, including health insurance coverage, life and disability insurance, a retirement savings plan, paid holidays and paid time off. Compensation ranges may differ based on contract value but will be commensurate with job duties and relevant work experience. An applicant's salary history will not be used in determining compensation. Maximus will comply with regulatory minimum wage rates and exempt salary thresholds in all instances. Accommodations Maximus provides reasonable accommodations to individuals requiring assistance during any phase of the employment process due to a disability, medical condition, or physical or mental impairment. If you require assistance at any stage of the employment process-including accessing job postings, completing assessments, or participating in interviews,-please contact People Operations at **************************. Minimum Salary $ 123,440.00 Maximum Salary $ 160,000.00

Join Our Team as a Port Services Project Engineer at APTIM! Are you passionate about engineering the structures that keep our ports and harbors moving? APTIM, a recognized leader in engineering and technical services for the maritime industry, is seeking a Port Services Project Engineer to join our team in either Mobile, Alabama or Charleston, South Carolina. As a key member of our Ports Services Group, you'll support projects involving the inspection, analysis, and design of structural systems for cranes, piers, wharves, and other critical port infrastructure. At APTIM, you'll work alongside experienced structural, mechanical, and electrical engineers to assess and solve complex challenges across the Gulf and Atlantic coasts. On the equipment side our work spans condition assessments, structural and mechanical repairs, retrofits, and new installations for container cranes and heavy maritime equipment. On the facilities side our work includes condition assessments, structural repairs, retrofits, and new design of critical port infrastructure. Using tools such as Mathcad, RISA, and AutoCAD, you'll contribute directly to analysis, design development, and the preparation of engineering deliverables that enhance reliability and performance in the port industry. Job Overview: We're seeking an engineer with a solid foundation in structural design who enjoys applying technical expertise to field investigations and detailed analysis. In this role, you'll participate in inspections, prepare technical reports, develop repair and design solutions, and collaborate with project managers to deliver practical, constructible outcomes for our clients. This position offers outstanding opportunities for professional growth and hands-on engineering experience in a technically diverse and rapidly evolving field. If you're ready to help shape the future of port and harbor infrastructure while advancing your career with a dynamic, forward-thinking company, we'd love to hear from you! Key Responsibilities/Accountabilities: Report to the Port Services Project Director and serve as a core member of the structural engineering team supporting port and harbor projects across the Southeast. Support and perform structural inspections of cranes, waterfront structures, and other port facility assets to assess condition, identify deficiencies, and develop repair recommendations. Assist in the development of detailed repair, retrofit, and new design drawings and calculations for steel and concrete structures, including crane components, piers, wharves, foundations, and pile-supported systems. Perform structural analysis and design using engineering tools such as RISA, Mathcad, and AutoCAD; assist in design reviews for new equipment and facility improvements. Collaborate with project managers to ensure technical deliverables meet project scope, schedule, and quality objectives. Participate in field work and inspections--approximately 10% of workload--including work at height, over water, or within industrial environments. Engage directly with client project managers and technical staff to coordinate ongoing and upcoming work and ensure responsive communication. Contribute to proposal development and the preparation of technical scopes, cost estimates, and schedules. Coordinate with multidisciplinary engineering teams, including mechanical, electrical, civil, and geotechnical disciplines, to deliver integrated port and crane engineering solutions. Support the continued growth of APTIM's digital inspection and asset management initiatives by applying innovative technologies and data-driven methods. Maintain an adaptable balance between office-based design and field-based activities, with limited travel (approximately 10%) throughout the Southeast. As the office expands, provide mentorship and technical guidance to junior engineers and inspection staff. Representative Projects: Structural inspections and condition assessments of container cranes, mobile harbor cranes, and other heavy lifting equipment. Design and repair of steel and concrete port structures, including piers, wharves, foundations, and pile-supported systems. Retrofit and upgrade design for waterfront structures and crane support systems to meet current load, safety, and operational requirements. Design review and technical support for new equipment procurement, including load path analysis and integration with existing port infrastructure. Port expansion projects, including new wharf construction, quay wall design, dredge integration, and associated infrastructure upgrades. Multi-disciplinary projects involving coordination with mechanical, electrical, civil, and geotechnical teams to deliver comprehensive port engineering solutions. Implementation of digital inspection methods and data-driven maintenance strategies for ongoing port facility management. Basic Qualifications: Bachelor's Degree in Civil or Structural Engineering required. Professional Engineer (P.E.) license preferred, or the ability to obtain licensure within 12 months of hire. 5-10 years of progressive structural engineering experience with emphasis on steel and concrete design. Experience with cranes, waterfront structures, or other heavy industrial or marine infrastructure strongly preferred. Proficiency in structural analysis and design software such as RISA, Mathcad, and AutoCAD; familiarity with Bluebeam and Autodesk Construction Cloud a plus. Demonstrated ability to perform and interpret engineering analyses and translate findings into practical repair and design solutions. Strong technical writing skills with experience preparing inspection reports, calculations, and design documentation. Excellent communication skills and the ability to interact directly with clients, project managers, and multidisciplinary teams. Ability to balance office-based analysis and design work with occasional field assignments (approximately 10% travel). Commitment to safe work practices in industrial and marine environments, including work at height and over water. Interest in applying innovative tools and digital inspection methods to improve efficiency and data quality. Passion for working in a consulting firm environment on a diverse portfolio of port and harbor projects. Primary work location in Mobile, AL or Charleston, SC. ABOUT APTIM APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $110K - $125K per year. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Employee Benefits Aptim Environmental & Infrastructure, LLC is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace ************************************ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location. Life insurance Short-term and long-term disability insurance 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here: APTIM 2025 401(k) Plan Features (makeityoursource.com) APTIM - Helpful Documents Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law) Watch our video: About APTIM - In Pursuit of Better

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA United States, Inc. is seeking skilled Project Engineer to provide technical and operational leadership for major shipbuilding and maritime projects. Essential Functions: Responsible for leading the technical and operational execution of assigned projects. Developing project requirements, coordinating with engineering resources, and monitoring project scope, schedule, and budget adherence. Ensures resolution of design, material, and planning issues, supports improved engineering processes, and liaises with cross-functional departments such as Finance, Production Control, Supply Chain, and Program Management. Ensure that all necessary technical reviews and approvals are obtained, and that compliance initiatives are supported across the organization. Requirements: Bachelor's Degree in Engineering required, with a minimum of five (5) years of experience in shipyard design, large ship construction, or comparable large-scale engineering projects (e.g., offshore platforms). Alternatively, candidates with a High School diploma or GED and eight (8) years of equivalent relevant experience will be considered. Experience in identifying design and production work sequence conflicts is required. Strong knowledge of shipbuilding specifications (ABS, Mil, API, etc.) is essential. Proficient in project scheduling and the ability to manage progress against deadlines. Excellent verbal and written communication skills required. Familiarity with ship production processes, build strategies, and milestone tracking is critical. Computer literacy, including proficiency with AutoCAD and Microsoft Office applications, is necessary. In-depth understanding of ship engineering systems required. Ability and willingness to work onboard vessels, including climbing ladders and navigating confined spaces, is mandatory. Working knowledge of maritime regulatory authorities (ABS, DNV, NAVSEA, USCG, IMO, etc.) required. Experience with high-speed aluminum vessel construction, modular construction methods, and U.S. Navy vessel design is preferred. Knowledge of shock design principles is advantageous.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for a Robotics Engineer to join our Final Assembly Line Engineering Department based in Mobile, AL. The Robotics Engineer is responsible for supporting operations needs pertaining to robots and automated industrial assets deployed within the Airbus Mobile manufacturing site. They maintain machines, propose industrial improvements, work closely with all engineering principals and with Airbus Robotics to monitor the status and implement solutions that sustain and increase the reliability and efficiency of the machines at aircraft production facilities. Meet the team: Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery - working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health & safety - along flowlines and flightlines. Join our team and watch our aircraft come to life. Your working environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP"). * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities: * Ensure the continued operation of robotic and other automation systems onsite, including preventative maintenance, diagnostics, and continuous improvement. * Perform root cause analysis of failures, and propose remediation in a timely fashion with effective countermeasures * Analyze customer feedback including warranty requests and generate prioritized actions to address shortcomings associated with the Mobile Manufacturing Site (MMS). * Monitor customer satisfaction and machine performance. * Perform troubleshooting and repairs in MMS. * Perform application programming on specialized platforms with applications in automation and robotics. * Serve as a liaison between Airbus operations and Airbus Robotics to resolve problems and inquiries. * Where necessary provide basic training for the operators. * Support early concepts of corrective designs and thoroughly test them with the Original Equipment Manufacturer (OEM). * Help develop a strategy for the verification of the corrective designs and participate in verification activities. * Level 2 is indicative of knowledge that can be applied with guidance or supervision. * Exercises discretion and independent judgment in the application of specialized knowledge on work that is predominantly intellectual and for which the output produced or the result accomplished cannot be standardized in relation to a given period of time. * Embraces company culture and values through exemplary execution and behavior. Contributes to company technical strategy. * Holds themselves and others accountable. * Guides and trains more junior members of the team. * Troubleshoot and resolve electromechanical issues. This includes work with tools such as DMMs, oscilloscopes, etc. * Will perform hands-on work to maintain robotics and automation. * Maintain expert level of product knowledge and application. * Assist in the design and development of new products and tools and provide support for various engineering design activities within the Airbus Operations scope. * Travel domestically to OEM sites to perform training if needed. * Maintain service records or documentation of equipment or systems. * Establish and maintain positive customer relationships. * Travel Required: 20% Domestic and International * Willing to make extended trips (1-3 months) to Airbus Robotics HQ in Seattle for initial extensive training. Your boarding pass: Required: * Eight or more years of relevant experience OR, * Four or more years of experience with a Bachelor's degree OR, * Two or more years of relevant experience with a Master's Degree. * Required: * Troubleshooting electromechanical problems, identifying the most likely faults in the mechanical, electrical or software depending on the fault. * Able to execute day-to-day work safely and without instruction or guidance. * 4+ years' experience testing and troubleshooting in Robotics or Industrial automation. * Train customers and colleagues in maintenance and operation activities * Be driven to achieve customer satisfaction including qualities such as responsiveness, quality, and on time delivery. * Demonstrated troubleshooting and root cause analysis skills. * Tenacious problem solver organized and detail oriented. * 5 years of industrial experience, preferably in the Robotics industry. * Proficiency with machine shop tools: drill press, lathe, sanders, and band saw. * Working knowledge of the following platforms: Windows 7 desktop and Linux embedded products. * The knowledge and interpersonal capability to work within an engineering development team that spans multiple disciplines (electrical, software, mechanical, systems engineering). * Excellent skills with typical productivity tools such as Microsoft Office and Google Docs. * Preferred: * Motor tuning procedures for many classes of motors, especially DC brushless servos and associated PID tuning for point-to-point and free-running applications. This includes the ability to troubleshoot poorly performing motor systems and apply solutions through improved tuning parameters or techniques. * Embedded system development including: circuit board development and troubleshooting, commercial microprocessor platforms and architectures (e.g. ARM), and memory management. * Mechanical and electrical design tools such as Solidworks, Catia, Altium, etc. * Safety risk assessments including: identifying risks, and appropriately mitigating those risks according to required performance levels. * PLCs and safety controllers, especially Siemens products * Electromagnetic Compatibility, including emissions and immunity. * Researching and selecting appropriate sensors for a given electromechanical design. * Knowledge of standards such as ISO 9000. * Required: * Excellent verbal and written English skills. Ability to communicate quickly, clearly, and concisely. * Provide professional, consistent, calm, clear and confident oral and written communication. * Works well in high pressure situations, during tight deadlines, and in front of customers. * Knowledge of ASTM standards and testing methods. * Beneficial: French, German. Physical Requirements: * Onsite: 100% * Vision: Able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. * Hearing: Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. * Speaking: Able to speak in conversations and meetings, deliver information and participate in communications. 100%, daily. * Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. 100%. * Carrying: Able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Lifting: Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools. * Sitting: Able to sit for long periods of time in meetings, working on the computer. * Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving. * Standing: Able to stand for discussions in offices or on the production floor. * Travel: Able to travel independently and at short notice. * Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces. * Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing. * Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: On-site Job Family: Manufacturing Engineering * ----- * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

requires 10+ years of related experience. **Job responsibilities:** + Responsibilities include mechanical engineering designs on small and medium retrofit, environmental, and new generation projects. + Leading in conducting mechanical design activities including pipe sizing and routing, material selection, pipe support design, valve selection, P&ID development, equipment layout, equipment specifications, and hydraulic calculations. + Developing datasheets for valves and other equipment, providing technical direction to designers, developing project scopes, schedules and budgets. + Making sound independent decisions with minimal information and assisting in checkout and startup of systems when necessary. **Skillsets and expertise required:** + Skillsets and expertise required for this position include significant experience with design of new construction and/or retrofit of power generation or heavy industrial facilities and the ability to take the lead role for detailed design activities + Significant knowledge of mechanical engineering design principles, proficiency with applicable codes, standards and regulatory requirements. + Experience in development, preparation and checking of P&IDs. + Experience with overall design and layout of piping systems, pipe sizing and routing, material selection, pipe support design, equipment selection. + Preparation of inquiry packages/data sheets, and specification of tanks, pumps, and balance of plant equipment, experience with hydraulic calculations. + Pipe-Flo (or similar software) experience is preferred, significant working knowledge of processes equipment including piping, valves (manual/control/relief), pumps, pressure vessels, and heat exchangers. + Experience with relief valve and control sizing, and the ability to build effective relationships with plant staff, design engineering staff and/or vendors. **Education:** + Bachelor's degree in mechanical engineering from accredited university. + A professional engineer license is desired **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Integer non velit. Donec diam neque, vestibulum eget, vulputate ut, ultrices vel, augue. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Donec pharetra, magna vestibulum aliquet ultrices, erat tortor sollicitudin mi, sit amet lobortis sapien sapien non mi. Integer ac neque. Duis bibendum.

Austal USA is searching for a skilled marine engineer or technician with hands-on experience in Diesel Electric Propulsion (DEP) and Machinery Control Systems. The ideal candidate will support mechanical and electrical system design, troubleshooting, and integration activities across propulsion and power-generation equipment. Strong diagnostic skills, familiarity with automation/control interfaces, and the ability to work in a dynamic maritime engineering environment are essential. Austal USA is recognized for its advancements in naval ship design and construction, presenting distinctive opportunities for team members to participate in influential initiatives shaping the maritime sector now and in the future. With a heritage rooted in innovation, Austal USA has been instrumental in propelling naval technology forward through sophisticated design, engineering, and delivery of Littoral Combat Ships (LCS), Expeditionary Fast Transport (EPF) to the recently awarded Offshore Patrol Cutter (OPC), Expeditionary Medical Ship (EMS), and the T-AGOS ocean surveillance vessels. What sets Austal USA apart is our commitment to innovation and our dedication to building the best ships for the United States Navy and the United States Coast Guard. We actively cultivate a culture fueled by intellectual curiosity and diverse perspectives, where every team member is integral to delivering cutting-edge solutions. REPORTS TO: Deputy Program Engineer SUPERVISES: Directs the work of engineering personnel assigned to the Project Team and engineering activities as directed by the Deputy Program Engineer. SUMMARY: Responsible for technical/operational leadership of project(s) in a matrixed environment by performing technical studies to define, generate and review project requirements, monitoring the assigned project(s) to ensure work scope, schedule, and budget are well defined and maintained, and coordinates between resource managers/supervisors and ensures reviews and approvals are received. DUTIES / RESPONSIBILITIES: Responsible for technical/operational leadership of assigned project(s)/mission within the programmatic guidelines set by the Program Manager and customer. Oversees and directs the work of assigned Engineering personnel to related projects. Defines, generates, and reviews project requirements documentation within defined scope. Monitors project to ensure work scope, schedule, and budget are well defined and maintained. Ensure resolution of engineering, material and planning issues Ensure implementation of improved engineering processes Provides the coordination between resource managers/supervisors and ensures all necessary reviews and approvals are received. Interacts with other business departments such as Finance, Production Control, Supply Chain, Program Management, etc. Complies with Austal's employee handbook general guidelines, company procedures and policies. Act as a Compliance Champion for the organization and work to promote a culture of compliance throughout the organization. Support business unit Tier 1 Compliance Lead in responsibilities as required. QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: Bachelor's Degree in Engineering AND five (5) years' experience in either shipyard design and large ship construction or as a Cognizant Engineer over multiple systems or similar large scale engineering design project (i.e. offshore platforms), OR three (3) years' degreed Engineering experience at Austal USA. In lieu of Bachelor's Degree in Engineering, High School diploma/GED and eight (8) years of equivalent relevant experience. Demonstrated knowledge of Shipbuilding specifications such as ABS, Mil, API, and other similar general construction specs required. Experience in identifying and anticipating design/production work sequence conflicts required. Excellent written and oral communication skills required. Demonstrated knowledge of scheduling, possess an ability to monitor progress to schedule and adhere to strict deadlines required. Demonstrated knowledge of ship building production such as build strategies, critical path, and production milestones required. Computer literate and familiar with AutoCAD, Microsoft Office products Demonstrated knowledge of ship engineering systems required. Willingness and ability to spend time onboard the vessel going up and down staircases and vertical ladders required. Working knowledge of Maritime Regulatory Authorities (i.e. ABS, DNV, GL, NAVSEA, MIL, USCG, IMO, etc.) required. Experienced in the construction of high speed aluminum vessels preferred. Demonstrated knowledge of large modular construction methods preferred. Experienced in design and construction of US Navy vessel preferred. Demonstrated understanding of shock design preferred. ADDITIONAL GUIDELINES: All candidates must meet Austal USA's basic employment eligibility guidelines: 18 years or older at time of application Able to provide proof of US Person status (permanent resident or citizen) No felony convictions of theft/deception or violent crimes within seven years from disposition date No felony convictions of drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check Must be able to obtain and maintain required Security Clearance. TOOLS: Computer - MS Office, AutoCAD DIRECTION EXERCISED: Coordinates the work of Engineers, Designers and Draftspersons assigned to the Program. DISCRETION EXERCISED: As assigned by the Deputy Program Engineer LIAISES WITH: Engineers, Designers, Draftspersons, Production Personnel, Production Control, Supply, Logistics, Regulatory Bodies, Program Management and Equipment Suppliers PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: ************. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

We are in search of a Project Engineer with Civil or Environmental experience. Required: The ideal candidate will have a minimum of four (4) years of experience (less MAY be considered) and preferably working in or with heavy industry including but not limited to oil and gas, pulp and paper/wood products, and/or chemical industry as well as public sector entities including local, State and Federal agencies; The Engineering candidate shall be a licensed Professional Engineer (P.E.) in at least one (1) southern state with those holding multiple States being considered more-closely. An EIT may be considered also if they have the right experience. Experience planning, designing, developing construction specifications and schedules, and overseeing construction and maintenance of civil, structural and environmental infrastructure. Experience with multi-media environmental permitting and compliance including air, solid / hazardous waste, wastewater, and stormwater. Experience with environmental assessment and remediation for RCRA and CERCLA types projects. Project management experience in civil and environmental projects with past responsibility for developing business to sustain or grow work backlog. General Duties: Candidate will work on assessments, remediation, etc. to support induistrial clients such as oil and gas and pulp and pater. Ensure staff and deliverables are prepared and delivered in strict accordance with client and regulatory requirements;Proven experience in design, project management and engineering verification. Independently plan, perform and coordinate advanced level professional and technical engineering studies, computations, drawings, reports and surveys. Ability to provide technical leadership and mentoring junior to mid-level staff. Ability to prepare technical reports, permit applications, management plans, and project proposals.Ability to perform steadily during peak workload and remain calm under pressure Ability to inspire and drive a culture of inclusive, high performing integrated teams Proficient in the use of a range of computer software programs and models for evaluating and developing detailed designs including CADD, GIS, and hydraulic/hydrologic applications. Proven ability to manage and develop a technical staff of engineers, scientists, planners and/or construction managers and quality assurance technicians; Proven sales experience with ability to develop business with existing and new clients. Exceptional research, technical writing, and verbal communication skills required. Ability to work in harsh environments and conditions ranging from remote forests to open construction sites. Understanding and experience in GIS and GPS technology and equipment are preferred. Self-motivated and capable of working on multiple projects simultaneously in a fast-paced team environment. Availability to travel with multiple overnight stays during some weeks.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon's System Integration & Test is seeking a Senior System Test Engineer will function as a technical member of the Shipboard Test Team interacting with a variety of stakeholders including reporting to the TSCEI (Total Ship Computing Engineering Infrastructure) Lead, along with interacting with System Integration and System Test Management, Navy Agencies, Navy Labs, Zumwalt Prime Contractors and selected major vendors. The TSCEI Systems Test Engineer will perform Installation, Configuration, Activation, Stage Testing, and Advanced Troubleshooting for all Raytheon and non-Raytheon equipment connected to the TSCEI network. This role is based at our on-site Pascagoula Mississippi office. What You Will Do Perform equipment installation, checkout, testing, reporting of results, Hardware and Firmware upgrades and maintain records as required. Upkeep and maintain the Ship's tactical network(s) and systems. Interact with both Zumwalt shipbuilders and their vendors in a collaborative manner Provide daily internal status reports to the TSCE lead. Establish and maintain relationships with Engineering and customer representatives. Provide underway system support for at sea test events. Ability to travel up to 50%, to testing and activation locations (CA, HI, RI), to include at-sea periods onboard Zumwalt class ships. Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience. Experience with systems, software integration, and/or test. Experience with Linux, Unix and/or other programming language. Ability to obtain and maintain an interim secret U.S. security clearance prior to the start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer CLI level Linux system administration skills working with RedHat, as well as knowledge of Java, C, and/or C++ and Active Directory/Exchange administration is preferred. CISCO CCNA, Redhat OS, and Fiber Optic Certifications are highly desired. Prior experience working in shipyard environments. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility- Relocation assistance available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Overview Qualifications Minimum Qualifications: 2 of the most recent 4 years' experience working as a Pharmacy Technician Must maintain the following Infirmary Health Pathways: Sterile Compounding and Aseptic Technique Pathway Controlled Substance Pathway Inventory Management Pathway Licensure/Certification/Registration: Current registry with the Alabama State Board of Pharmacy Certified Pharmacy Technician (CPHT) by the Pharmacy Technician Certification Board (PTCB) Responsibilities Provides leadership to a healthcare team to deliver comprehensive, quality service for a designated group of customers.

Johnson Service Group is looking for a contract Cabin Design Engineer to work in Mobile, AL. The Design Engineer is responsible for developing solutions to a variety of complex engineeringproblems, requiring judgment and ingenuity with Airbus product lines. General responsibilities include A350, A320, A330 module customization. Specific activities include but are not limited to: product development support, existing product customization, qualification and certification documentation review, continued airworthiness evaluation, cabin installation definition/drawings, and component supplier interface/oversight. Meet the team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of products across the globe, join our mission to connect the world. • Responsible for delivering fully qualified cabin equipment designs that meet the technical, weight, schedule, quality and cost targets of the Program. • Manage the General Requirements for Equipment & System Suppliers (GRESS) deliverables for the program, including determining the applicable GRESS items for Cabin equipment designs, maintaining the action item log, aggressively pursuing action holders to close actions, and providing complete transparency to stakeholders. 20% • Prepare and lead Initial Technical Coordination Meetings (ITCM), Preliminary Design Review (PDR), Critical Design Review (CDR) and major milestone meetings with Airline Customers, Suppliers all relevant stakeholders per development milestones. • Define/Validate Interfaces to the aircraft including development of customized modules installation requirements (including validation of both structural and system interfaces). Validate module interface points and update Customized Technical Specifications as appropriate • Guide and perform qualification and verification and validation of Cabin equipment designs including release of the Declaration of Design Performance (DDP). Ensure that the design is fully certified and all the necessary data for validation, test and certification delivered is in accordance with Program milestones. • Initiate, monitor and manage Supplier Improvements and Transformation Projects to drive performance and to ensure supplier's compliance to requirements and processes. Analyze Change Requests designs based on customer, manufacturing and/or design requirements. Your boarding pass: • Minimum BS degree in engineering or related field: • 6+ years of experience within the aviation industry with 3 years of relevant experience in aircraft cabin engineering and development process, and knowledge of associated design, certification and qualification requirements. • Excellent communication and negotiation skills. • Ability to work effectively in a fast-paced and dynamic environment. • Ability to understand and mentor principles within assigned discipline. • Ability to interpret an extensive variety of technical aircraft topics. • Ability to inter-relate with and motivate diverse teams. • Authorized to work in the US. Physical Requirements: • Onsite or remote: Onsite 100% • Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. • Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. • Speaking: able to speak in conversations and meetings, deliver information and participate in communications. • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. • Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. • Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. • Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. • Sitting: able to sit for long periods of time in meetings, working on the computer. • Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. • Standing: able to stand for discussions in offices or on the production floor. • Travel: able to travel independently and at short notice. • Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. ** Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D720

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Integration Systems Engineer Job Code: 31083 Job Location: Mobile Alabama (On-Site) Schedule: 9/80 regular (Every other Friday off) L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. Job Description: The Senior Specialist, Systems Engineering & Shipboard Engineering Integrator is a dual-role position responsible for the technical planning, integration, verification and validation, cost and risk management, and supportability and effectiveness analyses for shipboard systems. This role will oversee the integration of engineering systems and components on ships while ensuring the logical and systematic conversion of customer or product requirements into total systems solutions. This role will serve as the functional point of contact on site at Austal shipyard in Mobile Alabama. Essential Functions: + This Integration Systems Engineer works on site in Mobile Alabama daily. + Perform functional analysis, timeline analysis, detail trade studies, requirements allocation, and interface definition studies to translate customer requirements into hardware and software specifications. + Decipher and segregate project requirements into a design specification incorporating required shipbuilding specifications, military specifications, and commercial specifications. + Oversee the integration of engineering systems and components on the ship. + Provide status updates and reports to stakeholders, including progress, challenges, and risk mitigation plans. + Conduct system integration testing and troubleshoot issues as they arise. + Prepare and submit required reports and documentation to regulatory bodies as needed. + Provide technical support and problem solving on-site, addressing any issues that arise during integration. + Proactively address potential issues that may affect project timelines, costs, or quality. + Review and comment on supplier technical data, drawings, and technical procedures. + Write, review, and provide input to equipment test and trials documentation. + Support inspection and test of System installation including: + + Equipment installation + Equipment light-off + Trials and acceptance trials support + Travels up to 15%, including domestic and international travel. Qualifications: + Bachelor's Degree and minimum of 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior relevant experience. In lieu of a degree, minimum of 10 years of prior related experience. + Significant project and system architecture experience in relevant areas to L3Harris current and future Naval business strategy. + 6+ years prior satisfactory experience as an engineer working with shipyards and interfacing with engineers and management at all levels. Navy or related military experience is a strong desire. + Must be able to obtain and keep an active DoD Secret clearance. Preferred Additional Skills: + Supervisory experience and the ability to mentor, train, and motivate people to excel individually and as a team in a fast paced, context switching work environment is preferable. #LI-IK1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .