Senior mechanical engineer jobs in Memphis, TN - 125 jobs

Atlas Web Technologies - a Division of Atlas Roofing Corporation - focuses on the development and manufacture of state-of-the-art substrate product solutions for the building, construction, lamination, and original equipment management (OEM) industries. The solutions are derived from the three primary technologies: recycled paper, coated non-wovens, and hybrids of these base technologies. Atlas Web Technologies products are suitable for everything from packaging to roofing underlayments, buildings to automobiles, furniture table pads to lamination. Atlas Roofing Corporation, a privately owned company, established in 1982, is an international and multi-divisional manufacturer of roofing, sheathing, facer, and insulation product solutions. Atlas Web Technologies is seeking a Divisional Manufacturing Engineer for the Meridian, Mississippi facility. Divisional Manufacturing Engineer Job Duties & Primary Responsibilities Provide hands-on technical leadership to multiple plant locations driving improvements in reliability, process control, and other pertinent KPI's. Create necessary CAD drawings for equipment layout, process control, fabrication and assembly of components. Familiar with pneumatic, hydraulic, steam, and boiler systems and controls. Must have exceptional operational knowledge of process equipment and the ability to make logical decisions concerning the operation, maintenance and modification of process equipment with minimal supervision. Experience with project management and implementation from the initial planning stages to completion on time and within budget. Develop project scopes, budgets, and timelines for capital and expense projects with input from stakeholders. Prepare project justifications and formal authorization requests for capital projects generally over $100,000. Commission new production equipment, controls, and processes, and monitor modifications and upgrades. Familiar with control loops and control strategies to support troubleshooting and optimization of existing controls and processes. Independently evaluates, selects and applies standard engineering techniques, procedures and criteria, using judgment in optimization of processes and products involving modifications to facilities, equipment, methods and materials. Where appropriate, select and supervise external contractors and consultants to ensure they meet the requirements for function, cost, timing, and quality. Works with process, quality, production, and manufacturing personnel to develop and implement process changes necessitated by new technology or improvements to current technologies. Make observations and take measurements directly, as well as collect and interpret data from other technical and operating staff involved to develop and implement process improvement. Works with maintenance departments to develop proactive maintenance procedures and programs for the facilities and process equipment. Travel 25% to the other two locations (Sylacauga, Alabama & Franklin, Ohio). Expected travel requirement is minimum of 30%, potentially higher during project implementations. Divisional Manufacturing Engineer Additional Required Skills & Qualifications: (include computer, language, mathematical, and analytical skills required) Advanced analytical skills and creativity in solving problems and troubleshooting. Excellent interpersonal and communication skills (written, verbal and presentation), with the ability to effectively work with various levels in a team environment Strong organizational skills to manage multiple short and long-term projects. Competent with Microsoft Office, AutoCAD, and Microsoft Project Familiar with Computerized Maintenance Management Systems (CMMS). Knowledge of Programmable Logic Controllers (PLCs) (ControlLogix/ RS logic) is preferred. Divisional Manufacturing Engineer Supervisory Responsibilities This position has no direct internal supervisory responsibilities. Supervises and directs outside contractors during the construction and commissioning phases of capital projects. Divisional Manufacturing Engineer (include Certificates, Licenses, or Registrations required) Bachelor's degree in mechanical or electrical engineering, or similar technical discipline. Minimum of ten (10) years' hands-on work experience in a manufacturing environment with a proven track record of measurable results. Demonstrated initiative and the ability to handle complex assignments and be proactive. Experience in building materials or paper manufacturing is preferred. Experience in process batching and coating technology is preferred. Total Compensation Atlas Roofing Corporation offers competitive compensation and vacation/holiday package as well as a comprehensive benefits program including Medical, Dental, Vision, Life/AD&D/LTD insurance, 401k and Medical & Dependent Care Spending Accounts. Atlas Roofing Corporation is an Equal Employment Opportunity Employer. No calls or agencies please.

The Senior project Engineer 3 oversees the seamless transition of manufacturing processes from one location to another, ensuring minimal disruption. Responsibilities include coordinating with cross-functional teams, managing timelines, and maintaining product quality during the transfer. The role requires expertise in process optimization, problem-solving, and compliance with industry standards. Strong communication skills are essential for liaising with stakeholders, including engineering, quality, regulatory, supply planning, procurement, and production teams. Senior Project Engineer 3 also monitors and reports on progress, ensuring that all project objectives are met efficiently. What will you be doing. • Manage the transfer of manufacturing processes between locations, ensuring minimal disruption to production. • Create detailed project plans, including timelines, resource allocation, and milestones for the transfer process. • Work closely with engineering, quality assurance, regulatory, supply planning, procurement, production teams, and suppliers to align objectives and address potential issues. • Identify opportunities for process improvement and implement changes to enhance efficiency and product quality. • Ensure all processes adhere to industry standards, safety regulations, and company policies. • Track and report on the progress of the transfer project, addressing any deviations from the plan. • Resolve any technical or logistical problems that arise during the transfer to avoid delays and maintain production continuity. • Prepare documentation and provide training to ensure the receiving location can operate the new processes effectively. What will you need to be successful? • Bachelor's degree in science or engineering and at least 5 years' professional work experience in new product development, product transfer in a regulated industry (Med Device preferred). • Experience with medical device manufacturing methods is highly desirable. • Communicate optimally, while working with multi-functional teams, to achieve desired results. • Build productive internal/external relationships and collaborate in teams. • Complete assignments with directional input and periodic mentorship. • The ability to understand, interpret, follow, and improve Inspection, gauging methods and different Quality Systems. • Requires organizational and time management skills. • Understand basic technical issues and develop solutions with scope of responsibilities. • Basic knowledge of Operations deliverables / documentation is preferred. • Duties and responsibilities may change as business needs change. • Having GD&T knowledge will be beneficial. • Strong verbal and written communication and presentation skills.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. At Hyve Solutions, our mission is to empower customers, business partners, and employees to achieve success through shared goals, innovative strategies, and cutting-edge technology solutions. As a leader in data center solutions, we specialize in designing, manufacturing, and delivering custom Server, Storage, and Networking Solutions for the world's largest Cloud, Social Media, and Enterprise companies. We pride ourselves on fostering collaboration, driving innovation, and championing thought leadership. Our team is made up of diverse, forward-thinking individuals who challenge the status quo and work closely with some of the world's most influential companies. Hyve Solutions is part of SYNNEX Corporation, a Fortune 500 company. Join a team that thrives on excellence in a fast-paced, high-growth technology environment! As a Thermal Manufacturing Engineer, you will oversee, maintain, and operate multi megawatt liquid cooled production systems, and support production difficulties. The ideal candidate has experience with thermal measurement and is passionate about technology and engineering. Other duties include designing and managing facility scale HVAC systems in a production environment and collecting data from IoT sensor networks such as Temperature, Humidity, and Power. Responsibilities Create thermal simulation models from CAD to simulate HVAC systems for rack level, room level, and clean room performance. Program complex fan and pump control systems using large fields of sensor inputs, setting individual thermal limits, and setting fan and pump speed hysteresis controls for smooth steady state operation. Design, improve, and manage manufacturing processes to maximize efficiency and product quality in high density burn in rooms Optimize liquid cooled production lines, troubleshooting equipment failures, implementing quality control standards, and designing new manufacturing systems and workstations. Control costs for liquid production facilities. Interpret sensor log data and analyze presenting into human readable formats but also according to various customer's specifications using engineering principles. Operate and configure building management systems as pertains to thermal management systems Present test reports to customers and accept customer feedback Perform temperature measurements using thermocouples and IoT sensors. Collect data logs from test tools in Linux or Windows Observe and report unexpected results or possible areas of opportunity Regularly inspect measurement tools and repair or replace as required Requirements Bachelor's degree in Thermal Engineering or Manufacturing Engineering with strong emphasis on thermal engineering or equivalent experience. Experience with CDUs of all types including Liquid to Liquid, Liquid to Air, and Liquid to Refrigerant. Experience designing facility cooling plumbing systems (either chilled water or glycol based) Must have actually built, tested and refined project designs. Strong working knowledge of CFD and CAD software. Experience with thermocouples, IR cameras, airflow sensors, and power measurement. Experience working within a manufacturing environment. Experience building personal computers or servers. Experience with environmental chambers. Fluency in Linux command line operation Ability to examine customer requirements documents and build appropriate test plans for manufacturing team. Possesses background knowledge of thermal measurement sciences. Familiarity of test instruments such as data loggers, volt meters, and power supplies Proficiency in building thermal models preferably in Ansys CFD products. Works well as a team member but also independently. Pays close attention to detail. Communicates clearly and effectively verbally and in writing to people without an engineering background. Demonstrates intellectual curiosity. Exhibits familiarity with proper manufacturing safety procedures. Annual Salary Range $80,000-$120,000 USD DOE @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

The System Engineer I is an experienced engineer who is capable of managing the engineering and design needs of a project, with supervision, including layout, fabrication drawings, installation drawings, and calculations for our material handling systems. You may be assigned specific deliverables, such as: Issued for Review drawings, Issued for Construction drawings, Pre-start-up deliverables, As-Builts, and supporting calculations. As a System Engineer I, you will manage a team that develops material handling systems drawings that are on-time, accurate, and on budget. Although working under the leadership of a Design Manager, you will manage large parts of the project independently while coordinating your work with the rest of the team. This engineer is responsible for projects from the concept stage and takes the lead in design and supporting the project management and field teams. System Engineer I will be expected to master customer specifications and standards, system integration, and calculations in support of conveyor design. You would be expected to solve complex or unusual technical challenges during the design and installation stages of material handling projects. In this essence, the Systems Engineer: 1. Perform engineering duties associated with the design, fabrication, and installation of material handling systems. 2. Ensure that the engineering output for a project (drawings and supporting calculations) meet applicable codes, standards and regulations. 3. Develop calculations and integration associated with conveyor designs. 4. Develop a detailed knowledge of our customer's standards and specifications for conveyor design. 5. Develop a detailed knowledge of typical codes and standards associated with conveyor fabrication and installation. 6. When assigned as an engineering project lead, develop and communicate to the project team a detailed schedule of engineering tasks for their assigned project. 7. When assigned, track and report on the progress of their assigned project to the Director of Engineering. 8. Write technical reports, handbooks, and bulletins for use by staff and customers. 9. When assigned, manage their team to deliver quality drawings that are functional for installation and fabrication. 10. Uphold the policies and procedures of DCI. 11. Communicate with internal and external stakeholders/Customers 12. Perform any other tasks assigned by the business. Requirements Education, Skills, and Experience Minimum: Bachelor of Science Degree in Mechanical or Industrial Engineering Experience: 3 years minimum in design and development of engineered systems with focus on material handling Excellent internal and external communication skills Experience managing teams considered a plus Working knowledge of MS Office plus 2D and 3D CAD software (Inventor, Revit and AutoCAD preferred, but not required) FEA analysis software experience, such as RISA 3D, a plus Passage of Fundamentals of Engineering Exam a plus Must work well in a team setting, show ability to multitask, and prioritize work to meet deadlines Must have leadership, time management, communication, and customer service skills Strong interpersonal skills with a heart to serve Critical Qualities A commitment to grow and mature in the mission, vision, and core values of the Company A friendly, professional, optimistic demeanor Flexibility and composure under pressure Position Information Full-time position; salary with benefits Work schedule: Avg. 45 hours per week, nights and weekends as required to meet deadlines. Home office: Memphis, Tennessee Occasional travel: less than 25% **No solicitation from headhunters and/or recruiters** **This opportunity is only available to W-2 applicants. We are not considering Corp-to-Corp (C2C) or third-party arrangements.**

️ About the Opportunity: Ready to take your engineering career to the next level in a fast-growing, high-tech manufacturing environment? We're seeking a Manufacturing Engineer to lead equipment development from concept to the production floor. This hands-on, cross-functional role isideal for engineers with proven success in industrial automation, line implementation, and continuous improvement. Key Responsibilities: Lead equipment from concept through FDR, FAT, SAT, SOP, and ramp-up Collaborate with cross-functional teams (design, controls, IE, operations) Manage internal and external equipment suppliers for full deployment Define automation strategy, station-level requirements, and buffer logic Develop utility and material flow strategies (compressed air, power, water, etc.) Create detailed documentation: PFMEAs, SOPs, risk assessments, timing charts Drive validation plans, oversee installation, and support production launch Qualifications: Bachelors in Mechanical, Electrical, Chemical, Controls, or Industrial Engineering 4+ years in manufacturing or process engineering Hands-on equipment development, testing, and full-line implementation CAD proficiency (SolidWorks preferred; Catia a plus) Strong grasp of tolerance stack-ups, safety PLCs, LOTO, and industrial safety standards Experience with PLCs (Siemens, Allen Bradley, Beckhoff) Exposure to MES/database systems (Python/MySQL a plus) Domestic & international travel readiness Bonus Points: Automotive manufacturing experience Successful plant start-up experience Familiarity with lean manufacturing and Six Sigma Why Join? Be a part of a cutting-edge plant start-up Work with a collaborative, innovation-driven team Relocation package available Visa sponsorship & green card support available Pro Tip: When applying, include a brief summary of your qualifications along with your resume. The hiring team is seeking high-caliber, hands-on talent! Contact 24/7 ProTAS Today! ******************** Call or Text: ************ Apply Here Know someone great? TAG THEM NOW! #ManufacturingJobs #EngineeringJobs #MemphisJobs #ProcessEngineer #AutomationEngineer #PlantStartup #24x7ProTAS #EngineerHiring #TagAFriend #NowHiring #CareerOpportunity #ManufacturingInnovation

As our Project Engineer, you'll: Lead capital projects from concept to completion, managing budgets, schedules, and resources. Collaborate with engineering, operations, procurement, and construction teams to ensure project success. Conduct feasibility studies, technical evaluations, and manage contractors/vendors to meet project specifications. Ensure safety, environmental, and regulatory compliance every step of the way. Implement continuous improvement initiatives to optimize processes and outcomes. What You Bring: Bachelor's in Chemical, Mechanical, or related Engineering. 5+ years in project management or engineering in a chemical/industrial environment. Knowledge of project management tools (MS Project, Primavera). PMP certification is a plus. Strong communication, problem-solving, and collaboration skills. ✨ Step into a role where your expertise makes an impact every day. Lead projects, shape operations, and grow your career with Mitsubishi Chemical! The salary range for this position is $139,100-$146,800. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting. Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System.

A Senior Design Engineer is responsible for overseeing the design and development of custom rigging equipment and structural systems tailored to the specific needs of a project. They lead the planning, design, and implementation of new equipment while making sure each design satisfies the needs of the project, adheres to relevant safety standards, and meets required deliverables. The role involves working closely with project and production managers, as well as field experts. The Senior Design Engineer position also involves mentoring junior engineers, contributing to continuous improvement efforts, and driving innovative solutions that enhance operational efficiency, safety, and cost-effectiveness in crane and rigging design projects. Job Requirements: Experience: 5+ years of experience in structural or mechanical equipment design, preferably within the crane, rigging, or heavy lift/transport industry. Certifications: Professional Engineer (PE) license preferred, OSHA 10 Technical Proficiency: Must possess an in-depth understanding of engineering principles related to structural steel design, cranes, rigging, and load calculations. Extensive experience with steel construction and fabrication processes preferred. Proficiency with CAD, 3D modeling software, and industry-specific tools such as AutoCAD, Inventor, or similar programs is essential. Familiarity with the types of cranes, rigging equipment, and materials used in lifting and transporting heavy loads is also important. Finally, strong knowledge of relevant design standards and regulations, including OSHA, AISC, ASME, ANSI, and others specific to designing structural steel and rigging equipment, is necessary to maintain compliance and uphold industry best practices. Software Proficiency: Competency in Microsoft Office Suite (Excel, Word, PowerPoint) for documentation and reporting. Proficiency with computer-aided design (CAD) software (AutoCAD/Inventor) and calculation software (RISA 3D/Ansys/Mathcad) is required. Problem-Solving and Analytical Expertise: Ability to analyze and optimize structural steel and mechanical designs. Ability to adapt to changing project requirements and work in a fast-paced, dynamic environment. Strong desire to teach and develop technical expertise in junior engineers. Communication: Strong communication skills for reporting, documentation, and communicating with clients or team members. Ability to work effectively as part of a team, collaborating with crane operators, riggers, engineers, and project managers. Ability to accurately document and review design packages and incorporate changes when necessary. Project Management Skills: Strong organizational and time management skills to handle multiple tasks and meet deadlines. Ability to develop and update project schedules to ensure timely completion. Ability to estimate cost for design projects and fabrication. Ability and willingness to lead a team of junior engineers by fielding questions and reviewing their work. Physical Requirements: Willingness and ability to visit job sites regularly and work in outdoor and potentially hazardous environments, which may involve standing, walking, crawling, climbing ladders or scaffolding, and lifting moderate weights. Fit for Duty: Must pass a drug test, fit for duty and background check. Job Responsibilities: Create detailed design packages, including fabrication drawings, calculations, specification sheets, operation manuals, test certificates, etc. Perform steel design and structural analysis tasks. Understand industry regulations and standards (AISC, ASME, OSHA) and help ensure designs are in accordance. Develop and review design parameters for engineering clarity and customer communication. Create 3D models and technical drawings for equipment assemblies. Prepare technical specifications, operating instructions, and maintenance requirements for newly designed equipment. Create and review calculation packages that analyze relevant load cases to accurately support equipment design. Develop and review mockup and load test plans and participate in the setup and execution of the tests. Obtain working knowledge of existing Barnhart heavy lift and specialty rigging equipment. Identify materials and communicate with the fabrication shop on schedule and design optimization. Track project timelines and progress reports of a team of junior engineers. Estimate and review the cost of design, fabrication, and testing for various design projects. Provide on-site technical assistance during lifting and rigging operations to ensure lift plans are followed correctly. Identify and manage operational risk in line with industry regulations. Help ensure that equipment is maintained and in safe working condition and report any defects or issues. Work alongside field personnel such as crane operators, riggers, and fabricators to support day-to-day project operations. Communicate with clients and project managers to clarify requirements and relay project status updates. Support the procurement of necessary materials and equipment by liaising with suppliers and subcontractors. Record any changes to the design package, project scope, or schedule, ensuring all updates are properly documented. Identify minor technical issues on-site and work with senior engineers to resolve them. Participate in post-project reviews, helping to gather feedback and data for future designs. Continuously learn and stay updated on the latest industry practices, safety regulations, and engineering standards. Aid in the development of technical skills of junior engineers related to crane operations, rigging, and engineering design. Support in the professional development of junior engineers. Compensation and Benefits: Competitive salary Bonus program that pays for performance 401K contributions matched up to 10% of pay Benefits Package including medical, dental, vision, short & long-term disability Paid Time Off Barnhart CARES family care and community service opportunities. Education: • Bachelor's Degree in Mechanical Engineering, Civil Engineering, or a related field from an ABET accredited 4-year university. PURPOSE - Barnhart is built on a strong foundation of serving others. The fruit of our labor is used to grow the company, care for our employees, and serve those in our communities and around the world. MINDS OVER MATTER - Barnhart has built a nationwide reputation for solving problems. We specialize in the lifting, heavy-rigging, and heavy transport of major components used in American industry. NETWORK - Barnhart has built teams that form one of our industry's strongest network of talent and resources with over 60 branch locations across the U.S. working together to serve our customers. This growing network offers our team members constant opportunity for career growth and professional development. CULTURE - Barnhart has a strong team culture -- the “One TEAM.” We are looking for smart, hard-working people who strive for excellence in their work and appreciate collaboration. Join a team that values Safety, Servant Leadership, Quality Service, Innovation, Continuous Improvement, Fairness, and Profit with a Purpose. EOE/AA Minority/Female/Disability/Veteran

Manufacturing Management Associate - Project Engineer - Leadership Development Program Pay Range: $82,000 - $92,000 **Multiple factors, including Individual experience, skills and abilities, and geographic location will determine where an employee is ultimately placed in the pay range. **Variable pay may provide additional opportunities for financial awards. This job is eligible to participate in IP's short -term incentive plan . Category/Shift: Salaried Full-Time Physical Location: Remote role with extensive site travel Program Overview: We are looking for motivated individuals who have a solid professional foundation and an interest in growing their career with our world-class manufacturing company. This program is intended to expand your knowledge and skills through a variety of hands-on manufacturing and business experiences and to develop you as a future leader in International Paper. The Manufacturing Manager Associate Program offers a unique leadership pathway, with opportunities now available at several of our 160+ U.S. manufacturing plants. These facilities manufacture sustainable packaging solutions for local and national customers. The Job You Will Perform: Develop knowledge of key manufacturing metrics and their impacts on the business; seek opportunities to enhance performance to best in class Accompany project engineers on a variety of complexity assigned projects to better understand the engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations Gain comprehensive understanding of applicable industry governing codes in addition to federal health & safety policies/laws Become educated in project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing projects Become familiar with the engineering practices used in installation of corrugated manufacturing equipment and/or plant infrastructure improvements Knowledge and understanding of contractor services - mechanical, electrical, and structural Upon successful integration with the company and understanding of the industry and business segment, the Manufacturing Management Associate will be expected to take on role as a project engineer and project manager in support of the business. The Qualifications, Skills and Knowledge You Will Bring: Bachelor of Science degree in an engineering discipline from an accredited university is required. Proficiency in Microsoft Office Suite, including Microsoft Project Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. Direct experience or internship with a manufacturing company is a plus. Successful candidates will have problem solving skills, be action oriented, ability to manage multiple projects with varying priorities, competency in functional and technical subjects, communication skills, computer skills and the ability to work in a team environment. Candidate's ability to travel is required; duration of travel can exceed a week. Permanent relocation to Memphis is not required.

As an NRG employee, we encourage you to take charge of your career and development journey. We invite you to explore exciting opportunities across our businesses. You'll find that our dynamic work environment provides variety and challenge. Your growth is key to our ongoing success-take the lead in shaping your career development, goals and future! **Job Purpose** : Provide support for process improvements, performance monitoring, root cause analysis, engineering and construction activities, and operating and maintenance functions to ensure safe and efficient plant operation. **Emphasis** **:** **_Balance of Plant, PDM_** **Essential Functions:** + Provide direction to operations and maintenance departments to insure that plant equipment remains reliable. This includes both technical and financial decisions which impact the overall unit availability and cost control. + Provide technical support, testing and inspection expertise within their assigned process areas to ensure safe, reliable, and efficient plant operation. + Optimize station equipment operation to meet key performance indicators + Develop O&M and Capital budgets for the process equipment. Assemble ten year plans and budgets for projects to establish accurate projected cash flows out into the future. + Develop strategic plans for equipment overhauls to optimize equipment life and time between overhauls. + Develop outage schedules, coordinate and perform outage inspections for all process equipment. + Utilize predictive and preventative maintenance (PM/PDM) techniques to monitor and improve equipment. Evaluate and analyze process variables to identify status and trending of key operating parameters. + Conduct root cause analysis of equipment problems and provide recommendations to prevent future incidents. Assemble all equipment failure reports. + Develop, review & revise station procedures & technical instructions and documentation of equipment testing and inspections. + Provide engineering, design, economic justification, and specify parts and materials for projects and modifications. Implement projects and process modifications. + Conduct or procure training as required within their process. + Interface with outside engineering resources on an "as-needed" basis. + Work effectively in a team environment as a leader, member and/or facilitator. + Perform other duties and assignments as required. **Essential Functions for Emphasis:** **Rotating Equipment:** + Overall operation and maintenance of large rotating equipment including but not limited to: bearing operation and maintenance, precision alignment of rotating equipment couplings, vibration analysis and balancing, and non-destructive examination techniques for materials. + Knowledge of the operation and maintenance of large pumps and associated systems such as high volume/low head circulating water pumps, multi-stage vertical pit pumps, multi-stage high head boiler feed pumps, and other simpler pump applications. + Knowledge and experience in performing vibration analysis on typical equipment used at a power plant. + Experienced in collecting and analyzing thermography data on collected electrical as well as mechanical equipment and use analysis results to provide recommendations to repair/maintain plant equipment. + Knowledge and experience in oil analysis, which includes lubricating oils used in power plant equipment, such as turbines, gearboxes, fluid drives and transformers. + Must be able to collect and analyze motor current data and use the analysis results to provide recommendations to repair/maintain motors. + Experience in rotating equipment balancing, which includes in situ balancing as well as component balancing using a balance stand. **BOP:** + Knowledge of the concepts, construction, and operation of the turbine process steam cycle as it relates to a fossil steam power plant including basic thermodynamics. + Experience in maintenance and operation of all plant air supply systems, including station air, instrument air, and sootblowing air where applicable. + Knowledge and experience of service water systems, including low pressure systems, high pressure systems, closed cooling water systems, domestic (potable) water systems and circulating water systems. + Experience in the operation and maintenance of various fire protection systems used at a power plant. + Knowledge and experience in facilities management, which includes station heating, cooling, ventilation, plumbing and building envelope repairs. + Operations and maintenance of dust control technologies such as dust collection bag houses, dust transport systems, dust suppression systems, and passive dust control technologies. + Experience managing small to large outages, including specification development, station representative during installation, coordinate start-up and testing. + Experience in performing inspections on fans, pumps, ash handling systems, soot blowing equipment. **Boiler:** + General knowledge in applicable codes and repair methods on boilers and high energy piping (ASME, NBIC.etc.) + Knowledge in Non-Destructive Examinations (NDE). + Provide technical oversight on contractors during outages to ensure proper QA/QC procedures are followed. + Knowledge in coal mill and boiler operation, inspections, maintenance and performance testing. **QUALIFICATION GUIDELINES** Any combination equivalent to, but not limited to, the following: **Required:** Engineering or Technical Degree with a minimum of five years experience in technical support of plant processes. Extensive work related experience may be substituted for Engineering or technical degree. **Knowledge/Skills/Abilities:** + **_Thorough understanding of Power Plant processes and equipment and the interrelationships between them._** + **_Ability to effectively supervise, train and direct others (peers, employees, contractors/vendors) in an understandable, clear and consistent manner_** + **_Ability to read and understand technical information, prints and engineering data, interpret charts, graphs, and gauge scales. Ability to troubleshoot and repair equipment and systems._** + **_Risk management - able to make good judgment on utilization of sometimes limited resources._** + **_General to thorough knowledge in root cause analysis and proficient in technical report writing._** + **_Proficient in the use of PC, and Windows & Microsoft Office applications with particular emphasis on spreadsheet, scheduling, equipment performance and word processing programs._** + **_Strong written and verbal communication skills._** **Physical Requirements/Working Conditions** : + This position is a combination of work in office and industrial settings. + Must be able to wear required personal protection equipment (PPE) such as hard hats, safety glasses, goggles, face shields, hearing protection, respirators, fall protection harnesses, and other PPE as required. + Duties require extensive manual dexterity in usage of computer terminal and keyboard, while sitting for long periods of time preparing budgets, work scopes, outage schedules, and other reports as needed. + May be required to perform equipment inspections by climbing vertical ladders in excess of 20 feet and stairways in excess of 50 feet, using step stool, kneeling, bending, walking over uneven surfaces such as loose rock, open grating, up and down staircases. + May also be required to operate mobile equipment such as zoom booms or scissor lifts to reach heights to inspect equipment, which includes pushing or pulling equipment into place, climbing into a basket, and riding in the basket while the equipment is operation. + The compartments where certain equipment may be located may exceed temperatures of 130°F. + May be required to prepare and conduct training, including mentoring individuals one-on-one. In conducting training, the specialist may be required to carry training materials, and to stand for extended periods of time. + This position may require some domestic travel. **_(Management reserves the right to change, rescind, add, or delete the duties and responsibilities of positions within the job classification at any time.)_** **_Salary offered will be commensurate with the successful candidate's education and/or experience and consistent with the job location's market pay rate._** NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Vet/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Official description on file with Talent.

Buchart Horn | Memphis, TN| Full-Time Buchart Horn is seeking a skilled and detail-oriented Project Engineer - Transportation to support the design and delivery of complex infrastructure projects. In this mid- to senior-level role, you'll take ownership of technical design efforts, mentor junior staff, and collaborate across disciplines to help bring high-impact transportation projects to life. What You'll Do: As a Project Engineer, you'll lead the engineering components of transportation-focused projects while supporting the overall success of scope, schedule, and budget. This position plays a key role in team leadership, technical development, and client coordination. Plan, schedule, and coordinate detailed phases of engineering work on moderate to major transportation projects Perform and review engineering calculations, addressing design complexities such as conflicting requirements and material limitations Supervise and mentor project team members, including designers, technicians, EITs, and junior engineers Support project managers in developing proposals, work plans, budgets, and timelines Participate in client meetings and coordinate with internal and external project teams Conduct site visits and fieldwork to support project development and design validation Develop design plans, profiles, and diagrams using AutoCAD and MicroStation Process shop drawings, respond to RFIs, edit specifications, and prepare cost estimates Perform and oversee QA/QC procedures throughout project phases Maintain technical knowledge of transportation design standards, materials, regulations, and technologies Assist in resolving construction-related engineering challenges Contribute to internal training recommendations based on industry trends and technical advancements Lead or contribute to special technical studies and project reports Ensure compliance with both corporate and client procedures on design and implementation Conduct project review sessions to monitor progress and identify any required corrective actions Qualifications Experience, Technical Skills, and Attributes: Graduation from an ABET college or university with a Bachelors degree in an Engineering discipline. Minimum 7 years of engineering design experience. Licensed Professional Engineer Knowledge and experience using computer aided design and drafting, (AutoCADD & Microstation) software and Microsoft Office.

Corporate Project Engineer Are you interested in working for a company that offers both a challenging work environment and a rewarding career path? The primary responsibility of this position is to provide mechanical engineering services and support in order to promote safe, efficient, and reliable production runs to operations including the implementation and delivery of cost-effective capital and major maintenance projects. What You Will Do: Assist in the conceptualization, development, and execution of capital projects Develop a detailed scope of work, budgets, and schedules Assist in preparation of Authorization for Expenditure (AFE) requests Assist with project construction, commissioning, and handover Consult with supervisors, tradespeople, operators, and purchasers Provide input into the design and optimization of equipment to maximize reliability and performance Solicit contractors, vendors, and consultants Conduct engineering reviews of project plans, drawings, materials, and installations Ability to coordinate, facilitate and conduct internal and external project review meetings Supervise trades and contractors for safety and quality Act as a point of contact/liaison, provide technical support for consulting engineers, contractors, suppliers, and external agencies Travel to all US manufacturing facilities to provide technical support including troubleshooting, problem-solving, equipment assessments, and sharing of best practices and corporate standards Study and understand process flows, and equipment functionality Handle a wide range of verbal, written, and presentation communications including progress report writing, presentations on project status to peers, managers, and mill employees Provide auxiliary support to facilities for shutdowns, safety projects, and other duties as assigned Understand and apply applicable external codes and standards and regulations (ie. OSHA, NFPA, Building Code, etc.) Assist in the development of internal safety and project standards Special projects and other duties as assigned. Qualifications You Will Need: Completion of a Mechanical (or related) Engineering Degree from an accredited institution is required Must have 3 to 5 years of recent experience working as an engineer in construction project management for heavy manufacturing (Metal, Steel, Wood, Automotive): Excellent skills in all forms of communication The ability to read Civil, Structural, and Mechanical Drawings is required Proven interpersonal and leadership/supervisory skills including planning, organizing, directing, and monitoring of work activities to achieve project objectives Strong computer skills with experience in MS Office, AutoCAD, SolidWorks, and Microsoft Power BI are required Strong problem-solving and project management skills are required Ability to work independently as well as part of a team Self-starter with a desire to progress, learn, grow and succeed Ability to communicate effectively in oral and written form with all levels of the organization As a member of the engineering group, you will be expected to model/lead safety behavior, be positive and supportive of company goals and objectives, and value diversity. Embody the company traits of integrity, respect, humility, hard work, and frugality Preferred skills Preference is given to applicants with 5 years in a manufacturing or industrial environment Package Details Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1 Competitive starting pay On-the-job training and a A culture that strongly believes in promoting from within Medical Dental 401k with company matching & retirement contribution Employee stock purchase plan Life Insurance Disability Insurance Paid vacations and holidays

Requisition Title : Product / Manufacturing Engineering Duration: Full time Pay Rate : $72000-$80000 Yearly (C2C) Visa Status : US Citizens Client : Windchill Job Description: Performing engin eering assignments related to the creation, development and/or improvement of product designs. Make independent studies, analysis, interpretations and conclusions Product engineering or manufacturing engineering skills with Windchill PLM software familiarity. Need to transfer the Bill of Material information from Windchill to the local Manufacturing Engineering System. Bachelor of Science in Mechanical, Manufacturing Experience- 5 to 7 Years Required Skills: Product / Manufacturing Engineering Windchill PLM Familiarity / End user experience BOM experience Performing engineering assignments on product engineering

Job DescriptionDescription: Are you ready to make an impact where innovation meets precision? At Southern Systems International (SSI), we design and build world-class material handling systems that power industries across the globe. We're searching for a Manufacturing Engineer who thrives on problem-solving, enjoys working hands-on with production teams, and wants to grow in a collaborative, fast-paced environment. What You'll Do: Drive process improvements that boost efficiency, safety, and product quality. Partner with design engineers to bring complex ideas to life in the shop. Develop tools, fixtures, and layouts that keep our teams productive. Lead continuous improvement projects with Lean and Six Sigma principles. Be the go-to problem-solver on the production floor. Requirements: What You Bring: Degree in Mechanical, Industrial, or Manufacturing Engineering (or relevant experience). CAD skills (SolidWorks, AutoCAD, or similar). 10+ years of experience in a manufacturing/industrial environment. A knack for troubleshooting and process optimization. Strong communication and collaboration skills. Why SSI? Competitive pay + full benefits package Opportunities for growth and advancement A safety-first, team-focused culture Work that makes a real impact across industries Join us and be part of a company where your ideas aren't just heard-they're built. **No solicitation from headhunters and/or recruiters**

Are you ready to work for a more active world? At Bioventus, our business depends on developing our people. We invest in you and challenge you to be the best. We value our colleagues for their different perspectives and individual contributions, and our leaders listen. Our success rests on working together to achieve shared goals and rewards. Join a diverse team of global colleagues driven to help patients resume and enjoy active lives. The Manufacturing Engineer II is responsible for support and sustaining of existing products. The position is also responsible for delivering technical service of products including: installation qualification, upgrades, troubleshooting, repair and preventative maintenance. The responsibilities also include optimizing system performance to minimize equipment downtime and to ensure maximum overall customer satisfaction. Key Responsibilities: * Responsible for managing manufacturing activities and technical operations functions. * Serve as technical subject matter expert (SME) for all medical device products. * Collaborate with new product development teams to ensure successful integration of new products into manufacturing. * Visit external manufacturing sites as needed to provide technical and validation support and training to contract manufacturing organizations. * Create and maintain technical product specifications, standard work, drawings, bill of materials, batch records, procedures, and Global Unique Device Identification Database (GUDID). * Lead development, troubleshooting, and manufacturing process improvements with external vendors including preparation of design controls and design transfer. * Develop product packaging and establishes test requirements per ISO, and ASTM standards. * Using Lean principles, identify and implement processes to reduce waste and improve manufacturing yield and throughput. * Responsible to serve as SME for designing, assembling, modifying, and supporting custom designed and off-the-shelf processing equipment. * Develop, manage, and perform all process validation/verification and equipment qualification activities, including writing protocols, analyzing data, investigating deviations, non-conformances, corrective and preventative actions, and writing reports. * Develop standard operations procedures (SOP's) to ensure best practices are consistently followed across the organization. * Identify opportunities and resolve process/service issues; gather, analyze and interpret data to determine root cause or errors/nonconformances and implement appropriate corrective actions. * Measure assigned performance goals for manufacturing operations. Understand internal business processes and lead cross-functional teams in development of new and improved processes. * Hold oneself and others accountable to conduct business in a manner compliant with Bioventus' Code of Compliance and Ethics, policies and procedures and internal controls applicable to their role. * Collaborates with Audit & Risk Management function to identify business risks and develop and implement preventive strategies for functional area. * Other duties as assigned. Education and Experience (Knowledge, Skills & Abilities) * Bachelor or higher degree in Engineering (preferably Mechanical Engineering) and 2 or more years' experience required. * Knowledge of applicable state, federal, and international regulatory requirements (i.e. ISO 13485, FDA 21 CFR 820, etc.) for surgical products (i.e. requirements for current good manufacturing practice (CGMP's) for medical devices and biologics. * Clean room manufacturing experience is preferred. * Experience in mechanical design of tools, fixtures, and gauges. * Experience in implementing design to reduce manufacturing costs. * Experience in Lean concepts, including Root Cause Analysis and DMAIC thinking. Green Belt certification preferred. * Sound decision making and innovative thinking. * Excellent communications skills (written and verbal). * Proficient using MS Office products (Word, Excel, PowerPoint, Visio, Adobe, Outlook). * Experience using statistical software for data analysis. * Experience using solid modeling (CAD.CAM) software preferred. * Experience using document control software. * Knowledge of SAP or other integrated software application is strongly desired but not required. Are you the top talent we are looking for? Apply now! Hit the "Apply" button to send us your resume and cover letter. Bioventus is committed to fostering an inclusive and diverse community of employees with a strong sense of belonging. We believe we are bettered by all forms of diversity and take pride in working with top talent from every walk of life. In the spirit of inclusivity, qualified applicants will be considered without regard to age, ethnicity, disability, gender, veteran status, gender expression, gender identity, nationality, race, religion or sexual orientation. All individuals, regardless of personal characteristics, are encouraged to apply.

BU3 Lifecycle and Mobility We move the world - together. As an international leading development partner and supplier to the automotive industry, we at MAHLE are passionate about developing innovative solutions for climate-neutral mobility of tomorrow. Our focus is on e-mobility and thermal management as well as further technology fields to reduce CO2 emissions, such as fuel cells or highly efficient combustion engines that also run on hydrogen or synthetic fuels. In 2023, the technology group with its approximately 72,500 employes, generated sales of just under EUR 13 billion and with its 148 production locations and 11 major research and development centers, is represented in 29 countries. Come join our team at MAHLE! #StrongerTogether Your Contribution Develop and maintain a product line, maintain publication data and support creation of technical literature. Understanding of the automotive aftermarket, especially the heavy duty (HD) segment. * Perform research of the OE and aftermarket competitors' catalogs and components for information regarding new parts additions, and upgrades of existing parts. * Responsible for all facets of the product life cycle, to include; Outlining product detail, sourcing, new product introductions, supersessions, consolidations, re-labels and recalls; analyze new products and make recommendations. * Responsible for accuracy and completeness of application and product data in all publications. * Responsible for competitor analysis, maintaining competitor interchange data, and competitor market price analysis. * Coordinate the development of all new product programs. * Establish product and material specifications. * Responsible for the quality of products and content of sets. * Maintain close liaison with MAHLE Aftermarket Service Engineering, MAHLE Aftermarket Product Management - Germany, MAHLE OE engineering at international manufacturing locations and the engineering departments of vendors. * Assist field sales personnel with customer needs and requirements. * Respond to product inquiries submitted by sales personnel and customers. * Assist in the establishment of pricing for new products/parts. * Create mutually beneficial relationships with customers and suppliers * Other duties and special projects as assigned. * Complies with Company policies, procedures, guidelines and standards. Your Experience and Qualifications * Bachelor's degree in Business Management, Supply Chain Management, Automotive Technology, Engineering or related field is required. * A minimum of 10 years experience in Automotive or Aftermarket, with 5 years experience in Product Management in the Heavy Duty industry is required. * Working knowledge of internal combustion engines, engine sealing product design and materials, engine components in general, sourcing, completion of corrective action requests * Ability to read and understand blueprints desired * Must be able to ascertain how to react and successfully handle difficult situations. * Intermediate to advanced knowledge required in computer programs such as Microsoft Office. * International experience is preferred. MAHLE is not currently hiring individuals for this position who now or in the future require sponsorship for employment based non-immigrant and immigrant visas. However, as a global company, MAHLE offers many job opportunities outside of the U.S. which can be found through our employment website ****************** MAHLE Jobs & Career | Jobs With Opportunity to Advance MAHLE Careers Find your job at MAHLE. Get to know this leading international supplier to the automotive industry as an employer. Shape the future, with us. Do you have any questions? *********************** US Facts about the job Benefits: Benefits-US/CH_CN_DI_IB_LI_MA_MP_MW_OB_PH Entry level: Experienced hires Part- / Full-time: Full Time Functional area: R&D Department: BU3 Lifecycle and Mobility Location: Olive Branch, MS, US, 38654 Company: MAHLE Aftermarket (US) OB Closing date for applications Don't waste any time, apply while the position is online. Your future at MAHLE As a team player and someone who thinks ahead, you can deploy all your skills with us. In cooperation with colleagues from different countries and areas, you contribute in designing the mobility of the future. When selecting MAHLE, you choose trend-setting technologies and strategies. Are you interested in working with us and developing efficient and environmentally-friendly solutions, optimising existing products, and turning innovative ideas into reality? Then MAHLE is the right address for you. Shape the future with us.

Job Description Warren Oil Company has an immediate opening for an exciting new role as Corporate Manufacturing Facilities Engineer based out of our West Memphis, AR location. The ideal candidate will lead the processes of planning and direction of the design, construction, modification, continued performance and maintenance of equipment and machines in all six operating manufacturing plants. Manufacturing Facilities Engineer Duties & Responsibilities Plan, direct and coordinate manufacturing activities in six blending and packaging facilities Implement solutions to improve the flow of production Responsible for overseeing any modifications and maintenance of equipment and machinery Initiate and monitor all capital improvement projects and installations Assist in design, electrical, mechanical, and all aspects of equipment layout development work in connection with equipment or rearrangements in facilities Offer advice on equipment and machinery positioning on the factory floor to maximize production levels Collaborate with production, maintenance, engineering and senior management on regular basis Evaluate all production activities and prepare reports for all related activities Continuous process improvements Other duties as assigned Manufacturing Facilities Engineer Qualifications Mechanical Engineering Degree or other related discipline 15 years' experience working with blending and packaging production equipment (petroleum or chemical industry preferred) Technical and supervisory experience in electrical, pneumatic, hydraulic, instrumentations, automation and computer fields Strong working knowledge of programmable logic controllers (PLC) and computer automation theories (software and hardware) Experience with Computerized Maintenance Management (CMM), such as work order and preventive maintenance generation, parts procurement, systems and procedures in petroleum or chemical plants. Additional Notes Must be able to travel among the company's five operating facilities as required About Us WARREN OIL COMPANY began in 1976 with one semi-automatic packaging line. Warren Oil Company owns and operates five manufacturing and packaging facilities strategically located to serve customers in the Northeast, Southeast, Southwest, Midwest, and West coast. Warren Oil Company exports to more than 50 countries. Warren Oil Company purchased three of its five plants from Pennzoil. All of Warren's facilities are equipped to manufacture and package a diverse product slate ranging from automotive motor oils to industrial grease. Warren Oil Company holds the distinction of having the largest number of American Petroleum Institute engine oil licenses and certifications. Warren Companies manufacture and package lubricants under several proprietary registered trademarks; e.g., Warren, Lubriguard, Autoguard, Itasca, Coastal, LubriGold and Saxon. Additionally, Warren manufacturers and packages automotive, truck and small engine lubricants for several large corporations. We are and Equal Opportunity/ Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job DescriptionDescriptionWaggoner Engineering, Inc. is hiring a Project Engineer for our office in Hernando, MS to provide quality planning, designing and technical overview to assist the Project Manager/Client Account Manager in delivering project, within budgetary and time constraints. Are you ready to inspire, engage and deliver? For almost 50 years Waggoner has delivered sound results through a culture of integrity, service and creativity to benefit our clients. Waggoner has more than doubled in size over the last five years and growth is expected to significantly increase through the addition of talented personnel. What does that mean for you? Waggoner differentiates itself as a leader in growth strategy for water and disaster recovery, as well as providing full engineering services across 14 offices and 5 states; we need people who are inspired for future growth, engage as leaders in their respective fields, and deliver to both internal and external clients. If you are tired of hearing “we've always done it this way”; if you have a work hard/play hard attitude; and if you enjoy working with a vast team of professionals across various disciplines, you will fit right into our culture. Your Primary Responsibilities will include Performs engineering analyses and evaluations (primarily computer-based) in support of the planning and design of civil works projects, including but not limited to the following areas: Bridge hydraulics Flood hazard mapping Hydrologic analysis Hydraulic modeling - multi-dimensional Scour analysis Performs analysis and design of stormwater management facilities for roadway drainage, site drainage, retention/detention and other projects. Conducts assessment and evaluation of stormwater management conditions and develops recommended remedial measures. Maintains and documents written and verbal communications with clients throughout the development and completion of a project. Conducts project status review with project manager and team members, checking accuracy of work completed, and monitors timeliness of project completion. Attends meetings on project management. Assists Project Managers with administrative duties concerning completion of assigned projects, including review of schedules, scopes and budgets. Assists Project Manager in preparation of engineering studies and reports. Provides technical guidance and training to members of the project team. Prepares project design using sound engineering principles, engineering software and tools. Assists in preparation of contract documents and technical specifications. What you'll need Bachelor's degree in Engineering Professional Engineer license or ability to obtain one within a reasonable timeframe. 3 to 5 years of wastewater design experience; transportation is a plus Why Join Our Team We know work isn't only about what you do, it's also about who you work for and with! Waggoner Engineering provides a fun, family-friendly, and multicultural work environment that supports a work life balance, including: WEI Incentive Program Healthy Workplace Program Employee Referral Bonus Competitive Health Benefits Career Development and Training Flexible/Hybrid Schedule Community Service Opportunities Worldwide Travel Assistance Waggoner Engineering, Inc. is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

The Manufacturing Engineer is responsible for the review of engineering design drawings for manufacturability, development of the manufacturing process (router), and for providing engineering support to machinists, assuring efficient manufacture of quality parts. Best up-front processes and time with the manufacturing floor resulting in most efficient manufacturing is the goal. This role is the liaison between the engineering department and manufacturing. Key Responsibilities: Provide engineering review of design for manufacturability. Review is to include tolerances for function of mating parts, fixturing, special tooling, and gages required. Provide programming for projects requiring advanced technical skills. Evaluate programming needs for current runs and work with Team Lead to distribute programming requirements to capable machinists with a goal of producing a quality part with maximizing machine efficiency. Also ensure proper program naming and revision are in place. Coordinate models and / or drawings required with the engineering department. Coordinate any process changes or special instructions needed for the router with the engineering department. Notify QA Manager or employee responsible for gage calibration and tracking of any need to acquire special gages by EMS or from customers. Develop / monitor manufacturing routing processes for most efficient outcome considering current load and current demand on equipment. Provide engineering support to the manufacturing floor. Presence on the manufacturing floor and communication with the machinist is essential to assure manufacturing intent and efficiency.

The Manufacturing Engineer is responsible for developing, improving, and supporting manufacturing processes to ensure safe, efficient, and cost-effective production of CNC-machined aluminum components. This role focuses on process stability, continuous improvement, new line development, and collaboration across operations, quality, and suppliers to support production goals. Responsibilities: Process & Manufacturing Engineering * Evaluate and improve existing manufacturing processes to enhance safety, quality, throughput, cost, and process stability. * Design, develop, and implement new production lines for CNC-machined aluminum components. * Develop manufacturing process flows, layouts, and standard work documentation. * Review component designs and assembly operations to ensure manufacturability and efficient production. * Tooling, Equipment & Capital Projects * Specify, coordinate, and validate tooling, fixtures, gauges, and manufacturing equipment. * Work with internal teams and external suppliers to support tooling and equipment design, build, and launch. * Support capital and tooling strategies, including cost analysis, justification, and implementation. * Assist with equipment commissioning, process validation, and production ramp-up. Continuous Improvement & Problem Solving * Apply Lean manufacturing principles to reduce waste, scrap, rework, and cycle time. * Lead or support root cause analysis efforts using structured problem-solving tools. * Develop and implement process controls to ensure consistent and repeatable results. * Support standardization and best-practice development across the production area. Cross-Functional & Project Support * Manage or support manufacturing-related projects from concept through implementation. * Collaborate with operations, quality, engineering, sourcing, and program teams to support quoting, launches, and ongoing production needs. * Interface with suppliers, peers, and industry resources to research and apply new technologies and manufacturing methods. * Participate in training, seminars, and conferences to maintain and expand technical expertise. Compliance & Safety * Support and adhere to all corporate policies, procedures, and safety requirements. * Promote a safe work environment and support continuous safety improvement initiatives. Required Qualifications: * Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, or a related technical discipline. * Minimum of 3 years of manufacturing engineering experience in a production environment. * Hands-on CNC machining experience required, preferably with aluminum components. * Experience developing and implementing manufacturing processes and process controls. * Working knowledge of Lean manufacturing principles. * Strong project coordination skills with the ability to manage multiple priorities. * Effective communication skills and the ability to collaborate across all levels of the organization. * Ability to travel as needed to support plants, suppliers, and customers. Preferred Qualifications * Experience with automation and/or robotics. * Exposure to capital project justification and equipment procurement. * Familiarity with root cause analysis tools (e.g., 5 Whys, Fishbone) and SPC. * CAD experience (SolidWorks, AutoCAD, or similar). * Experience supporting new product or production line launches.