Senior mechanical engineer jobs in Oklahoma

Merrick is seeking a Senior Mechanical Engineer to join our Energy, Manufacturing & Bioprocessing Business Unit. This full time, direct hire position, will be responsible for engineering, design, coordination, client communications and associated construction administration. This position will be located in our Greenwood Village, CO, Tulsa, OK, or Chattanooga, TN offices. As a Senior Mechanical Engineer with our Energy, Manufacturing & Bioprocessing team, you will work in a dynamic multi-discipline environment with other engineering and technical personnel to ensure overall project goals are met. A hybrid work schedule will be supported. Annual salary range for this position is $125,000.00 - $160,000.00. Pay offered may vary depending on job related knowledge, skills, and experience. WHAT YOU'LL DO * Apply your knowledge in Food & Personal Care, Bioprocessing, Oil & Gas, Chemical, Power, Manufacturing and Industrial and shipbuilding facilities/systems (Conceptual Design). * Ensure understanding and compliance with owner's requirements of the facility or corporate standards related to mechanical design. * Confirm and review applicable codes and standards such as, but not limited to, the IBC, ASME, API, PIP and NFPA. * Establish and document the mechanical systems basis of design and in doing so provide clarification, qualifications and design assumptions regarding relevant design issues. * Develop scopes of work based on RFPs and pre-bid meetings with clients. * Work with owner and construction management team to validate construction cost and provide value-engineering options as necessary. * Interpret scopes-of-work and translate them into executable project plans. * Manage project mechanical engineering and design team and oversee all aspects of the mechanical scope related primarily to equipment and piping. * Perform and document engineering calculations related to mechanical engineering for the purpose of selecting code compliant systems and equipment. * Perform sizing and selection of equipment and systems. * Oversee piping group activities related to mechanical equipment, piping and 3D modeling to support mechanical deliverables. * Perform pipe stress analysis utilizing software such as CAESAR II, NozzlePro, etc. * Work with the project team to design a cohesive, technically acceptable, and optimized piping system. * Perform detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents. * Mentor other mechanical engineers and designers.Construction Support: * Contribute to the preparation of construction documents including drawings, specifications, calculations, and equipment datasheets. * Oversee problem solving efforts for field oversights and addressing RFI's. * Perform field inspections and review of reports. * Work with Project Engineer/Manager to ensure that project schedule will be met, and complete documents provided for each deliverable. REQUIRED QUALIFICATIONS * Bachelor's degree in mechanical engineering from ABET accredited program required. * Twelve (12)+ years industry experience. * Registered Professional Engineer or ability to obtain your PE within the first year of employment. * Experience with Design/Build and EPC projects. * Experience leading teams of engineers on design projects. * Client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * Pipe stress analysis experience utilizing software such as CAESAR II. * Significant experience designing and installing retrofits and upgrades at manufacturing, industrial, and shipbuilding facilities. * HVAC and plumbing design for industrial facilities. * Knowledge of ASME B31.3 and B31.1, ASME Boiler & Pressure Vessel codes, PIP and API codes. * Experience in managing personnel and project engineering. PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Bachelor's degree in mechanical engineering from ABET accredited program required. * Twelve (12)+ years industry experience. * Registered Professional Engineer or ability to obtain your PE within the first year of employment. * Experience with Design/Build and EPC projects. * Experience leading teams of engineers on design projects. * Client projects for this position require U.S. Citizenship. * Apply your knowledge in Food & Personal Care, Bioprocessing, Oil & Gas, Chemical, Power, Manufacturing and Industrial and shipbuilding facilities/systems (Conceptual Design). * Ensure understanding and compliance with owner's requirements of the facility or corporate standards related to mechanical design. * Confirm and review applicable codes and standards such as, but not limited to, the IBC, ASME, API, PIP and NFPA. * Establish and document the mechanical systems basis of design and in doing so provide clarification, qualifications and design assumptions regarding relevant design issues. * Develop scopes of work based on RFPs and pre-bid meetings with clients. * Work with owner and construction management team to validate construction cost and provide value-engineering options as necessary. * Interpret scopes-of-work and translate them into executable project plans. * Manage project mechanical engineering and design team and oversee all aspects of the mechanical scope related primarily to equipment and piping. * Perform and document engineering calculations related to mechanical engineering for the purpose of selecting code compliant systems and equipment. * Perform sizing and selection of equipment and systems. * Oversee piping group activities related to mechanical equipment, piping and 3D modeling to support mechanical deliverables. * Perform pipe stress analysis utilizing software such as CAESAR II, NozzlePro, etc. * Work with the project team to design a cohesive, technically acceptable, and optimized piping system. * Perform detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents. * Mentor other mechanical engineers and designers.Construction Support: * Contribute to the preparation of construction documents including drawings, specifications, calculations, and equipment datasheets. * Oversee problem solving efforts for field oversights and addressing RFI's. * Perform field inspections and review of reports. * Work with Project Engineer/Manager to ensure that project schedule will be met, and complete documents provided for each deliverable.

Campus OSU-Stillwater Contact Name & Email Jodi Prouty, *********************** Work Schedule Monday through Friday, 8:00AM-5:00PM with occasional evenings and weekends. Appointment Length Regular Continuous/Until Further Notice Hiring Range $77,000 - $105,000 Salary Priority Application Date While applications will be accepted until a successful candidate has been hired, interested parties are encouraged to submit their materials by 2026-01-02 to ensure full consideration. Special Instructions to Applicants For full consideration, please include a resume, cover letter and contact information for three personal references About this Position The OSU New Product Development Center (NPDC), an engineering extension unit of the College of Engineering, Architecture, and Technology at Oklahoma State University, provides Oklahoma manufacturers and inventors with university-based research teams to develop and commercialize new product concepts. These efforts may include evaluating the characteristics of existing products, establishing the status of technology, evaluating the business and financial implications of new product implementation, developing new products, updating a current product to lead the market, integrating new technology or broadening market shares with new product features. The NPDC is seeking a Senior Design Engineer to work in Tulsa, Oklahoma. The Senior Design Engineer provides the leadership necessary to achieve the mission and goals of the NPDC by managing and completing product development projects for clients. They provide expertise and guidance in the area of mechanical design, work closely with the project team and manager to achieve desired outcomes, and allocate resources appropriately to assure successful project completion. The Senior Design Engineer coordinates with NPDC business and technical staff to complete multi-disciplinary projects, engages cross-campus resources, and develops effective relationships with clients. Required Qualifications Bachelor's Mechanical, Electrical, Aerospace, Agricultural, Bio-Systems Engineering, or related field (degree must be conferred on or before agreed upon start date) 5 years industrial experience to include: hands-on working experience in the industry on new product development. Familiarity and experience with more than one type of rapid prototyping equipment (SLA, SLS, FMS, Z-corporation rapid prototyping equipment) including hands-on experience with CAD software (Solidworks, Pro-E, NASTRAN, or similar), ability to repair different mechanical equipment; or Masters degree in Mechanical, Electrical, Aerospace, Agricultural, Bio-Systems Engineering and three years industrial experience as listed above Skills, Proficiencies, and/or Knowledge: Good communication and laboratory skills, Microsoft Word, Excel, Access, PowerPoint, Solid Modeling and project management Ability to lift up to 50 lbs. Preferred Qualifications Master's Engineering 5 years industrial experience Certifications, Registrations, and/or Licenses: Professional Licensing (PE) degree in any engineering field, project management certification.

We are seeking an experienced Mechanical Design Engineer to join a growing team specializing in multi-axis robotic positioning systems. This role offers the opportunity to fully design complex mechanical systems from concept through installation, often integrated with six-axis industrial robots. The ideal candidate enjoys hands-on engineering, takes ownership of projects, and thrives in an environment where designs evolve and innovation is encouraged. This is a highly collaborative role with strong internal technical support, including access to experienced engineers and a licensed Professional Engineer. Strong communication skills and the ability to interact positively with customers are essential. Hours: 7:30am - 4:30pm Salary: $100,000 - $110,000 (DOE) Benefits include: 401(k) with company match Medical and dental insurance Annual bonus plan Travel: Required, as needed for installation and implementation support Key Responsibilities Design multi-axis mechanical positioning equipment for robotic automation systems Develop complete SolidWorks models, assemblies, drawings, and supporting documentation Apply practical knowledge of structural analysis, welding, machining, and mechanical assembly Manage engineering projects from concept through completion, including installation oversight when required Collaborate with internal engineering, manufacturing, and assembly teams Communicate effectively with customers to support design requirements and implementation Participate in troubleshooting and continuous improvement of existing designs Support integration of mechanical systems with industrial robots

Cardinal FG - Durant, a World Class glass manufacture is currently seeking an Industrial Electrician to join our team-based facility. Cardinal FG - Durant takes great pride in providing a behavioral based safety environment with a clean atmosphere. You must be able to troubleshoot, test, repair, install, and calibrate electric and electronic equipment on site. This position is a day shift but may include some weekends or after hours work. In a float glass manufacturing plant that runs 24/7, a Mechanical Engineer designs, installs, and provides support to the plant's facilities, equipment, and production processes, and leads continuous improvement in the areas of quality, safety, reliability, and yield. The ME needs to demonstrate a solid work ethic through diligent effort, availability, physical involvement, good decision-making, effective troubleshooting, and completing projects that improve the facility. The ME functions as a member of the Engineering Department and works collaboratively with maintenance and production. The ME completes additional duties as requested by managers and others within the plant and may assist other plants. Essential Functions and Responsibilities Support a 24/7 manufacturing process Help the Engineering Department to reach Company goals. Troubleshoot problems and repair equipment (spontaneous work) Identify continuous improvement (planned projects) Manage design system projects (planned work) Train others on equipment (planned work) Communicate information. Collaborate with others. Develop skills for the future Education/knowledge requirements 4-year degree in Mechanical Engineering or related engineering field, such as physics. Emphasis in industrial systems, industrial controls, pneumatics, power transmission, linear motion systems, CAD Software, motors, synchronous drives, basic programming on robots, basic industrial electricity. Know plant processes and equipment that support operations. Skills needed Organizing and tracking data, establishing facts, and drawing valid conclusions that define problems. Reading, analyzing, and interpreting complex engineering documents and OSHA regulations. Troubleshooting Project Management Leadership MS Office applications: Word, Excel. CAD software proficiency: AutoCAD and SolidWorks Physical requirements and equipment to use Physical requirements include walking, climbing stairs, working in extreme temperatures, bending, lifting, working in confined space, working overhead, crawling. Must be able to wear respirator (pass pulmonary test). Equipment to use includes computers, basic power tools, forklift, robotics. EXCELLENT BENEFIT PACKAGE Competitive wage. MONTHLY Profit Sharing program 401(k) retirement plan Comprehensive insurance package that includes: Health Insurance Health Savings Account, with employer contribution match Dental Insurance Vision Life and Disability Insurance Paid Vacation and Float time Paid Holidays Onsite Cafeteria We are looking for candidates that work safely, have a strong work ethic, have a positive attitude, and work effectively and efficiently in a clean, team-based environment. Cardinal is an equal opportunity employer, smoke-free/tobacco-free, and drug free workplace. Upon hire, Cardinal Glass Industries uses E-Verify to verify employment eligibility of all new employees.

Agilis is looking for Mechanical Design Engineers, both entry-level and experienced, who can help us solve complex problems related to gas turbines and other complex machinery. The Mechanical Design Engineer acts as a mentor to others and will work in a creative environment which is conducive to teamwork and strong professional development. Successful candidates for our positions will be able to work on a variety of projects using a variety of software. Responsibilities and duties for this position include: • Performing initial and ongoing design projects and reviews • Delivering documentation that provides critical analysis and suggestions for innovative solutions • Developing CAD project drawings • Collaborating with team members including program management and technical leads to optimize engine performance.

We are a large growing mechanical contractor in Oklahoma that works on many of Oklahoma's biggest and best HVAC and Plumbing Projects. This is a full-time position with great salary and benefits package as well as career-growth opportunities. We are planning to hire Oklahoma's best and brightest HVAC and Plumbing Design Engineer's in the near future. Responsibilities: Ensure client satisfaction in early phase of upcoming projects. Review project specifications, design, identify value engineering, and calculations accurately. Attend events, job sites, and meet closely with: Owners, clients, architects, as well as sub-contractors and MEP-Design Engineers. Requirements: Local Stable work history. 5+years of HVAC Engineering and Design experience. Bachelor's degree in Mechanical Engineering, PE License preferred. Strong knowledge in: State and Local HVAC and Plumbing Building Codes, AutoCAD, Microsoft office, Carrier HAP, Trane Trace 700, Revit, BlueBeam, and Navisworks.

The Mechanical Design Engineer for the Airstair program is responsible for developing and reviewing installation requirements, technical information, airframe production installation/fabrication drawings, engineering instructions, and related production guidance materials as it pertains to the mechanical and structural aspects of a modification program. Review and develop requirements and ensure requirements are implemented in design solutions (3 years of professional experience is required) Ensure design content meets requirements of Statement of Work (3 years of professional experience is required) Manage project deliverables and schedules (2 years of professional experience is required) Create, review, and approve detail, assembly, and installation drawings (3 years of professional experience is required) Develop and review 3D models to support the installation of mechanical and structural provisions (3 years of professional experience is required) Prepare, review, and approve engineering documents such as Weight and Balance Reports, Stress Analysis Reports, Thermal Analysis Reports, Modification Instructions, to support FAA or military certification as required (2 years of professional experience is required) Create and review classical stress analysis (3 years of professional experience is required) Conduct internal and external design reviews (3 years of professional experience is required) Provide technical assistance in order to develop proposals, statement of works, and labor estimates In addition to experience in the listed areas above, Dow Aero requires experience in the following areas: FEA (Finite Element Analysis) Modeling Software, minimum one: SolidWorks (preferred), Fusion 360, Creo, Catia FEA Software, minimum one: ANSYS, ABAQUS, COMSOL, Nastran

Job Description Are you ready to take your career to the next level? At Professional Engineering Consultants (PEC), we are dedicated to providing innovative solutions and exceptional services across a variety of markets. We are looking for passionate and talented individuals to join our team and contribute to our mission of creating sustainable and impactful solutions for our clients and communities. At PEC, we pride ourselves on fostering a positive work culture that values the well-being of our employees. Our supportive environment encourages collaboration, respect, and professional growth. We offer a vibrant team atmosphere and comprehensive benefits packages. We are seeking a driven and enthusiastic individual to join our Mechanical Engineering team. This is a fantastic opportunity to make a significant impact and grow your career with us! Position Summary: The Design Engineer will be responsible for design on multiple projects, working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for preparing design deliverables for a variety of projects while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Performs engineering design, coordinates with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Performs tasks during construction administration including review of submittals, site investigations, and RFI response under the direction of the Project Engineer Performs design and takeoff computations by hand and by computer software Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards Organize project information and files according to corporate standard practices and workflows Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others Excellent oral, written, and interpersonal communication skills Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu TRANE TRACE 700 or equivalent HVAC Loads software Various online equipment selection software Experience with codes and regulations, interpreting plans, and design of discipline specific project components: Fire Protection Performance Specification Mechanical Equipment Layout and Room Sizing Plumbing System Design, Calculations, and Layout Domestic Water (Cold Water, Hot Water, and Hot Water Recirculation) Sanitary Waste and Vent Roof Drainage Natural Gas Plumbing Equipment Sizing Plumbing Fixture Selection and Specification HVAC System Design, Calculations and Layout HVAC Loads HVAC Equipment Sizing Airside HVAC Hydronic System Hydronic System Equipment Sizing Temperature Controls System Design and Layout Education and Experience: Bachelor's degree in an appropriate field of study from an ABET Accredited University is required License and Certification: Engineer in Training Certification preferred Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A PEC is an AA/EEO/Veteran/Disabled employer.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Join Olsson's South Facilities Engineering and Design team as a Senior Mechanical Design Technician, where you'll help bring healthcare, data center, and commercial projects to life through high-performance HVAC and plumbing system designs. You'll use your experience and technical skills to support the design and documentation of mechanical systems that meet code requirements, energy performance goals, and project-specific needs. This role is ideal for an experienced designer who thrives in a collaborative environment and is passionate about delivering well-coordinated, efficient mechanical systems Primary Responsibilities Prepare detailed mechanical system layouts, plans, and sections using Revit or other design software. Collaborate with engineers to develop coordinated HVAC, plumbing, and specialty system designs. Ensure quality and accuracy of design drawings and construction documentation. Contribute to the development of standards and drafting best practices. Support multidisciplinary coordination, clash detection, and project delivery timelines. Mentor junior design staff and provide technical guidance as needed. Assist with documentation and submittal processes, including specifications and equipment schedules. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Associate degree in Drafting, Design Technology, or a related field (preferred). 6+ years of mechanical drafting or design experience, preferably in building systems. Proficiency in Revit; experience with AutoCAD and other BIM tools is a plus. Strong understanding of HVAC and plumbing systems in commercial, healthcare, or mission-critical buildings. Detail-oriented with strong collaboration and communication skills. Ability to support field coordination and occasional site visits. #LI-Hybrid #LI-DD1 Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society. Are you someone who is passionate about working with cutting-edge technologies and revolutionizing the industry? If yes, then Sulzer Chemtech's Process Solutions division is where you should be! We are a team of innovative professionals who are committed to delivering excellence and guaranteed performance in the field of separation technologies. Our services are designed to cater to multiple industries like chemicals, pharmaceuticals, polymers, biofuels, or food and beverage. As part of our team, we depend on your entrepreneurial spirt to drive the development of process solutions, from conceptualization to plant reality. If you are looking to be part of a team that shapes the future of process solutions, then Sulzer Chemtech is the place for you. We are looking for a Mechanical Engineer, Pressure Vessel to join our CT_MTCS team in United States . Your main tasks and responsibilities: * Creation of equipment specifications and layout drawings according to internal and international applicable standards, customer specifications and contractual agreements. * Independent processing of process equipment and machine orders with support of purchasing, project management other specialized departments. * Independent creation of purchasing specifications and purchase requisitions. * Checking detailed documents created by external suppliers or customers. * Supporting the project management in the implementation of technical specifications, regulations, quality and deadlines. To succeed in this role, you will need: * Bachelor of Science in Mechanical Engineering * 3+ years mechanical engineering design of pressure vessels and rotating equipment design for applications in chemistry, pharma, or oil and gas industries. * Experience in using pressure vessel design code ASME VIII-Div 1. * Knowledge of AutoCAD or SolidWorks design software. * Analytical capability as required in performing calculations, reviewing, assessing and interpreting customer requirements and developing responsive design specifications and parameters. What we offer you: * An innovative, vibrant, and agile culture * Opportunities to develop as a professional and grow in areas of your interest from a world-class, progressive international company * A competitive salary and robust company bonus plan * 12 paid holidays plus additional PTO and company paid time off to volunteer * Comprehensive benefits program * Retirement plan matching with additional match benefits available after 1 year No visa or work permit support can be provided for this role Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in Brazil, China, Finland, Germany, Ireland, Switzerland, South Africa, the UK and the USA.

The Development Engineer will take ownership of the full technical product development cycle-from concept generation through product launch-while providing technical support to customers and manufacturing teams. Success in this role requires collaborative problem-solving, cross-functional teamwork, and a commitment to delivering robust, high-quality products that meet the toughest demands. Key Responsibilities: Research, design, and develop advanced assemblies and components. Lead engineering efforts from concept through product launch. Troubleshoot and sustain existing products to enhance performance and reliability. Collaborate with cross-functional teams, including manufacturing and customer support, to provide technical expertise and support project goals. Ensure all designs meet performance, quality, and durability standards for severe-duty applications. Supervisory Responsibilities: None Duties/Responsibilities: Product and Technology Innovation: Execute R&D activities to identify new technologies, materials, and design techniques that can be used to develop innovative new products for the oil and gas industry. Tasks include research, ideation and concept development, prototype development and testing, data analysis, and final product development. Product Improvement: Continuous improvement of existing product designs and specifications to enhance performance, quality, and reliability. Failure Analysis: Coordinate product failure analysis and develop solutions to improve product performance and prevent future issues. Production Support: Address and resolve production-related issues with current product lines to support efficient and effective manufacturing processes. Cross-Functional Collaboration: Work closely with teams across the organization to clearly define engineering project and/or support requirements, allocate resources, and coordinate tasks required to deliver project objectives and deliverables on schedule and in budget. Customer Communication and Support: Communicate and collaborate with our customer base from field locations to the corporate office to understand their challenges, provide expert technical support, and world-class solutions that help them achieve success. Engage with customers in the field to gather VOC on new and existing product performance. Project Management: Manage projects from conception through to completion, ensuring they are delivered on time and within budget. Problem Solving Skills: Leverage expert technical skills to analyze product design, process, and application issues and deliver effective and efficient solutions. Documentation: Maintain detailed records of the design and development process, projects, and resulting products, including 2D drawings, 3D models, design and manufacturing specifications, test results, data analysis, product BOMs, and product manuals. Continuous Improvement: Stay informed of the latest trends and advancements in the engineering and product design sectors through ongoing education, organizational membership, and analysis of trade and professional journals. Required Skills/Abilities: Troubleshooting mechanical failures, problem solving, and root cause analysis. Ability to interface with staff at all levels in corresponding departments. Demonstrated effective communication with customers independently in both office and frac service field/site location settings. Proficiency in Microsoft Office (Word, Excel, Access), Autodesk Inventor, and SAP. 3D modeling, GD&T, and tolerance analysis. Must be able to travel 10% - 15% of the time within North America. Education and Experience: Bachelor's degree in Mechanical Engineering. 5+ years' experience in product development and engineering support. Additional plus experiences: pump design and application, oilfield pressure pumping, statistical analysis, and finite element analysis. Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 25 pounds at times.

The Mechanical Design Engineer will be responsible for mechanical engineering design and will create final construction drawings throughout the entire construction process. Accommodation Requests We are committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment. If reasonable accommodation is needed to participate in the job application or interview process, contact ************ or ********************** Essential Duties and Responsibilities Typical functions of the Mechanical Design Engineer's job include, but are not limited to: Produces engineering design elements consistent with project specifications. Produces design elements and troubleshoots flaws in accordance with the project hours, scope, and parameters. Produces engineering construction documents based on project specifics. Manages project timelines and related design activity communication between the design team and the client accurately and timely. Provides assistance in the preparation of proposals and engineering agreements. Provides project coordination with in-house and outside sources. Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes, and standards consistent with company quality standards. Accurately and consistently execute the QA/QC process. Produces accurate and complete engineering project specifications within project parameters. Provide timely billing of projects to the accounting department. Actively participates in post-design activities and represents the company in client meetings, through construction completion. Actively mentor junior engineers and designers. Follows established company policies and procedures. Engages actively with other company members to continuously strive to improve processes, create efficiencies, and reduce costs. Education, Experience, and Technical Skills Required Bachelor's in Mechanical Engineering, Mechanical Engineering Technology, or Architectural Engineering. Minimum 3 years in mechanical design engineering in the architecture, engineering, or construction industry Real ID or Passport or must obtain upon hire Proficiency in Microsoft Office suite, including Word, Excel, Outlook, and Teams Expert level proficiency in utilizing Revit to apply BIM Modeling knowledge to various architectural and engineering projects Sound knowledge of mechanical engineering fundamentals Excellent communicator, organizer, and engager Thrive in a fast-paced environment with changing demands and priorities Initiate and enjoy independent problem solving Successfully incorporate feedback and manage multiple points of view Demonstrate excellent language and written communication skills Preferred Engineer in Training (EIT Designation) Eligible and interested in pursuing a PE License Working Environment Most of this role is performed in a professional temperature-controlled office environment when not working from a home office, remotely, or onsite at a project location. Additionally, this role is required to attend site visits. During site visits, there may be exposure to a variety of environmental conditions, such as being outdoors, being in indoor non-temperature-controlled environments, and maneuvering into tight spaces to scan existing electrical power and lighting systems. During site visits, you will work long days (10-12 hours) to complete 3d scanning jobs at client locations. These are typically week-long trips and happen 3- 4x per calendar year. Physical Demands Sitting/Standing: This role is generally sedentary performing sitting work utilizing technological office equipment including a laptop, mouse, keyboard, computer monitors, telephones, scanners, copiers, and fax machines. Walking: This role requires the ability to move about inside the office to access technological equipment required for the role. During site visits, this role requires the ability to traverse various project sites and buildings that will have uneven surfaces. Stooping/Kneeling/Crouching/Crawling: This role may require stooping to reload printer trays with print paper. During site visits, this role requires the ability to stoop, kneel, crouch, and crawl to set up scanning devices that will scan an existing structures heating, ventilation, air-conditioning, and piping systems. Using Hands/Fingers: This role constantly operates technological office equipment such as laptop, mouse, keyboard, computer monitors, telephones, and scanners, copiers, and fax machines. Talking/Hearing: This role requires constant communication with others in the organization to exchange information, review information, and make decisions about information. Seeing: This role requires the ability to view existing building structures inside and out to determine where scanning devices should be placed to get the required scans for the project. Carrying/Lifting: This role requires the ability to lift up to 30lbs to transport technological office equipment to and from various workspaces. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Native American Hiring Preference Our parent company, Mno-Bmadsen, prefers to hire Pokagon citizens who are qualified and suitable for available positions. For purposes of this section, “qualified” means that the applicant meets the technical and experiential needs for employment; and “suitable” means that the candidate appears to be the best fit considering present circumstance and conditions. Targeted preference is in the following order: First, to qualified Pokagon Band citizens; and Second, to qualified spouses, and qualified custodial parents; and Third, to other qualified Native Americans; and Fourth, to all other qualified applicants Any determinations as to the applicability of the Pokagon hiring preference are at the discretion of each Company President. Reporting Branch: Buildings Services Reporting Entity: Steelhead Engineering Fair Labor Standards Act Status: Exempt Hours Per Week: 40 Reporting Status: Hybrid Reports To: Engineering Technical Manager Manages Others: No Overnight Travel: Up to 10% Annually Tags: #LI-Hybrid #LI-SM1

DirectHire Title: Custom Machine Design Engineer ll Company: Trinity Employment Specialists Salary Range: $108,306 - $130,086 / Annually Trinity Employment Specialists is seeking a Custom Machine Design Engineer to contribute independently to engineering projects under the supervision of a senior engineer. The role focuses on designing custom, one-off machinery, including CNC winders and electrically, hydraulically, or mechanically driven equipment. Responsibilities include design, fabrication, installation, startup, and troubleshooting of specialized equipment. Strong proficiency in SolidWorks and AutoCAD is required for producing detailed fabrication drawings with precise tolerances and manufacturability considerations. Experience with automation, PLC systems, hydraulics, and design for manufacturability (motor sizing, gearbox/shaft sizing, bearing selection) is highly valued Primary Duties & Responsibilities: Develop custom machine designs to optimize equipment performance and manufacturing processes. Collaborate with product design engineers to define specifications that align equipment capabilities with product requirements. Prototype new equipment or processes to support manufacturing. Translate performance requirements into detailed specifications for equipment development or engineering projects. Analyze and optimize industrial processes, including layout and equipment placement, to maximize efficiency. Recommend process and equipment improvements, incorporating the latest technologies. Collaborate with electrical engineers to integrate automation systems. Design test equipment and procedures for evaluating product performance and reliability. Work with vendors to source components and manage fabrication, machining, and assembly. Prepare technical packages including drawings, BOMs, specifications, calculations, and cost estimates. Oversee installation, operation, maintenance, and repair of equipment to ensure compliance with design specifications. Investigate operational issues to identify root causes and recommend corrective actions. Read and interpret blueprints, schematics, and technical reports. Education & Experience: Bachelor's degree in Mechanical Engineering or related field required; Master's preferred. Minimum 5 years of experience in custom equipment design. Experience in composite manufacturing is a plus. Ability to execute defined portions of projects under general supervision of a senior engineer. Skilled in creating detailed fabrication drawings and BOMs using AutoCAD and SolidWorks. Knowledge of shop fabrication, machining processes, and hydraulic system design. Experience with automation, PLC systems, DFM, motor sizing, gearbox/shaft sizing, bearing selection, structural and thermal calculations, and tolerance analysis. Familiarity with composite, plastic, and sheet metal design is preferred. Behavioral Competencies: Dependable, communicates proactively regarding work progress. Applies problem-solving skills and judgment to engineering issues; escalates complex matters appropriately. Demonstrates active listening, critical thinking, and independent problem-solving. Self-manages workload and priorities with limited supervision; shows emerging leadership. Technical Competencies: Ability to read and interpret technical drawings and schematics. Strong mechanical aptitude with hands-on understanding of shop fabrication and machining. Proficiency in SolidWorks and AutoCAD (2D/3D) for detailed fabrication drawings and BOMs. Experience with FEA, material selection, structural/thermal calculations, and tolerance analysis. Familiarity with automation, PLC systems, hydraulics, and design for manufacturability. Knowledge of composite or nonmetallic product design preferred. This position requires occasional evening, weekend, overnight, and international travel. 120000.00

JOB TITLE: Design Engineer PAY RATE: $70/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Create solid 3D models in CATIA V5 for aerospace components Generate detailed drawing packages, layouts, and engineering documentation Perform model release activities ensuring accuracy, compliance, and configuration control Collaborate with Integrated Product Team (IPT) members to resolve design challenges Provide factory and production floor support during build and assembly Convert 2D drawings into 3D models for modernization and optimization initiatives Requirements: 10+ years of aerospace engineering experience (Boeing experience strongly preferred) Expertise in structural and mechanical design for aerospace systems Advanced proficiency with CATIA V5 Strong understanding of FAA regulations and aerospace industry standards Must be a U.S. Citizen (as defined by ITAR). Desired Skills: Experience with composite materials and advanced manufacturing techniques Familiarity with stress analysis / finite element modeling Background supporting design certification processes Engineering degree from an ABET-accredited program About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! Engineers - #Hotjobs

Your Opportunity: We are looking for highly motivated Engineering student to join our team as a Product Engineering Co-op from May-December 2026 in Tulsa, Oklahoma. Greenheck Group is a dynamic, multi-branded international commercial HVAC manufacturer. Our equipment is used worldwide in commercial, institutional, and industrial facilities, ranging from comfort ventilation to manufacturing processes. Our efficient products improve comfort, safety, and health of lives across the planet. Since 1947, we are deeply committed to helping you “Build Your Future,” through professional growth, challenging projects, and exciting opportunities to explore your career path. What You'll Be Doing: Assist with laboratory testing operations which include the setup, test, and data collection of various life cycle testing, refrigeration performance, and efficiency testing of Greenheck products. Assist engineering team with the startup and commissioning of the new lab and test facility on the Greenheck Tulsa campus. Interpret test data, write technical reports, and communicate results to engineering team. Help to create new product CAD drawings, 3D models and documentation needed for new product launches. Assist engineering with prototyping new product designs and providing feedback regarding designs. Participate in cost reduction and quality improvement projects. What You Should Have: Enrollment in a related bachelor's degree program (Manufacturing, Mechanical, Industrial, Electrical Engineering or similar degree) On track to graduate in the next 2 years or less. Ability to act and make decisions independently. CAD experience preferred (AutoDesk, Solid Works, Inventor). ASHRAE, FSAE, Baja, or related student organization participation is a plus. Hand and power tool experience. Knowledge of airflow systems, HVAC systems and electrical systems is a plus. Things You Should Know: Team members in our college programs: Network: You will interact and network within the intern & co-op group across the U.S. (over 50 total college students). Meet Our Executives: You will present your projects and experiences to our company leaders and executives at the end of your term. Get Exposure to Various Areas: You will participate in Fundamental Fridays - professional development sessions where you connect directly with our leaders. Make a Difference: You will have the opportunity to take part in company sponsored volunteering. Collaborate: You will be an important part of our team with opportunities to collaborate and partner within your team and across the company. Why You'll Love It Here: Our culture is built on growth, innovation, continuous learning, making a difference in our community, and the tremendous talent of our team members. Our college programs provide exposure to leadership, mentoring, and the tools to help you grow professionally. We are deeply committed to help build your future and pledge to provide you with the types of challenges and opportunities that will relate to your interests and personal development goals. Compensation and Benefits: Greenheck Group takes pride in providing competitive pay. The starting base pay range for this position is $23/hour - $27/hour and may vary based type of position and school seniority. Visa Sponsorship Information: We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to consider candidates who will require any type of immigration work sponsorship either now or in the future. This includes but is not limited to F1-OPT, F1-CPT, H-1B, TN, L-1, J-1, etc. SPECIAL NOTATION The preceding statements are intended to describe the general nature and level of work being performed by people in this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills. The Employer retains the right to change or assign other duties to this position. EEO STATEMENT We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. ACCOMMODATIONS REQUEST Greenheck Group complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. To request an accommodation for the application or interview process, please email **************** with your name, job title, posting number, and requested accommodation. RECRUITING FRAUD ALERT At Greenheck Group, your personal information and online safety are our top priorities. Our recruiters will only direct candidates to apply through our official career page at ************************************ We will never request payments, financial account details, or sensitive information such as Social Security numbers. If you're unsure about the legitimacy of a message, please contact **************** for verification. If you're looking for a place to grow while working with happy, enthusiastic, values-based people, you'll enjoy your career with us!

Mechanical Engineer, Pressure Vessel - Full Time - Tulsa (OK), United States Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society. Are you someone who is passionate about working with cutting-edge technologies and revolutionizing the industry? If yes, then Sulzer Chemtech's Process Solutions division is where you should be! We are a team of innovative professionals who are committed to delivering excellence and guaranteed performance in the field of separation technologies. Our services are designed to cater to multiple industries like chemicals, pharmaceuticals, polymers, biofuels, or food and beverage. As part of our team, we depend on your entrepreneurial spirt to drive the development of process solutions, from conceptualization to plant reality. If you are looking to be part of a team that shapes the future of process solutions, then Sulzer Chemtech is the place for you. We are looking for a Mechanical Engineer, Pressure Vessel to join our CT_MTCS team in United States . Your main tasks and responsibilities: * Creation of equipment specifications and layout drawings according to internal and international applicable standards, customer specifications and contractual agreements. * Independent processing of process equipment and machine orders with support of purchasing, project management other specialized departments. * Independent creation of purchasing specifications and purchase requisitions. * Checking detailed documents created by external suppliers or customers. * Supporting the project management in the implementation of technical specifications, regulations, quality and deadlines. To succeed in this role, you will need: * Bachelor of Science in Mechanical Engineering * 3+ years mechanical engineering design of pressure vessels and rotating equipment design for applications in chemistry, pharma, or oil and gas industries. * Experience in using pressure vessel design code ASME VIII-Div 1. * Knowledge of AutoCAD or SolidWorks design software. * Analytical capability as required in performing calculations, reviewing, assessing and interpreting customer requirements and developing responsive design specifications and parameters. What we offer you: * An innovative, vibrant, and agile culture * Opportunities to develop as a professional and grow in areas of your interest from a world-class, progressive international company * A competitive salary and robust company bonus plan * 12 paid holidays plus additional PTO and company paid time off to volunteer * Comprehensive benefits program * Retirement plan matching with additional match benefits available after 1 year No visa or work permit support can be provided for this role Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in Brazil, China, Finland, Germany, Ireland, Switzerland, South Africa, the UK and the USA.

Job Description Are you ready to take your career to the next level? At Professional Engineering Consultants (PEC), we are dedicated to providing innovative solutions and exceptional services across a variety of markets. We are looking for passionate and talented individuals to join our team and contribute to our mission of creating sustainable and impactful solutions for our clients and communities. At PEC, we pride ourselves on fostering a positive work culture that values the well-being of our employees. Our supportive environment encourages collaboration, respect, and professional growth. We offer a vibrant team atmosphere and comprehensive benefits packages. We are seeking a driven and enthusiastic individual to join our Mechanical Engineering team. This is a fantastic opportunity to make a significant impact and grow your career with us! Position Summary: The Design Engineer will be responsible for design on multiple projects, working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for preparing design deliverables for a variety of projects while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Performs engineering design, coordinates with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies Performs tasks during construction administration including review of submittals, site investigations, and RFI response under the direction of the Project Engineer Performs design and takeoff computations by hand and by computer software Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards Organize project information and files according to corporate standard practices and workflows Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects Other projects and responsibilities may be added at the company's discretion Special Knowledge, skills and abilities: Ability to work independently and with others Excellent oral, written, and interpersonal communication skills Strong work ethic Experience with computer aided drafting and modeling using industry accepted software as described below: AutoDesk Revit AutoDesk AutoCAD Microsoft Outlook, Excel, Word, and PowerPoint Bluebeam Revu TRANE TRACE 700 or equivalent HVAC Loads software Various online equipment selection software Experience with codes and regulations, interpreting plans, and design of discipline specific project components: Fire Protection Performance Specification Mechanical Equipment Layout and Room Sizing Plumbing System Design, Calculations, and Layout Domestic Water (Cold Water, Hot Water, and Hot Water Recirculation) Sanitary Waste and Vent Roof Drainage Natural Gas Plumbing Equipment Sizing Plumbing Fixture Selection and Specification HVAC System Design, Calculations and Layout HVAC Loads HVAC Equipment Sizing Airside HVAC Hydronic System Hydronic System Equipment Sizing Temperature Controls System Design and Layout Education and Experience: Bachelor's degree in an appropriate field of study from an ABET Accredited University is required License and Certification: Engineer in Training Certification preferred Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A PEC is an AA/EEO/Veteran/Disabled employer.

Fort Worth, TX; Kansas City, MO; Missouri - Remote; North Kansas City, MO; Oklahoma - Remote; Oklahoma City, OK; Texas - Remote; Tulsa, OK ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Join Olsson's South Facilities Engineering and Design team as a Senior Mechanical Design Technician, where you'll help bring healthcare, data center, and commercial projects to life through high-performance HVAC and plumbing system designs. You'll use your experience and technical skills to support the design and documentation of mechanical systems that meet code requirements, energy performance goals, and project-specific needs. This role is ideal for an experienced designer who thrives in a collaborative environment and is passionate about delivering well-coordinated, efficient mechanical systems **Primary Responsibilities** + Prepare detailed mechanical system layouts, plans, and sections using Revit or other design software. + Collaborate with engineers to develop coordinated HVAC, plumbing, and specialty system designs. + Ensure quality and accuracy of design drawings and construction documentation. + Contribute to the development of standards and drafting best practices. + Support multidisciplinary coordination, clash detection, and project delivery timelines. + Mentor junior design staff and provide technical guidance as needed. + Assist with documentation and submittal processes, including specifications and equipment schedules. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Associate degree in Drafting, Design Technology, or a related field (preferred). + 6+ years of mechanical drafting or design experience, preferably in building systems. + Proficiency in Revit; experience with AutoCAD and other BIM tools is a plus. + Strong understanding of HVAC and plumbing systems in commercial, healthcare, or mission-critical buildings. + Detail-oriented with strong collaboration and communication skills. + Ability to support field coordination and occasional site visits. \#LI-Hybrid \#LI-DD1 **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Campus OSU-Stillwater Contact Name & Email Richie Wolfe, ************************ Work Schedule Monday through Friday, 8:00am-5:00pm with occasional evenings and weekends. Appointment Length Regular Continuous/Until Further Notice Hiring Range $96,000 - $160,000 Special Instructions to Applicants Please submit a resume and cover letter About this Position This recruitment is for positions that are part of a Career Development Plan (CDP). Levels within the CDP and their responsibilities are outlined below. Actual salary and title will be determined based on the candidate's experience, education, internal equity, and departmental funding. The range indicated above includes both the typical hiring range and potential future progression. R&D Engineer III ($96,000 -$124,000) Responsible for all duties of the previous levels in addition to: Provides technical support to clients and assist with troubleshooting and problem‐solving. Contributes to moderately complex aspects of a project. R&D Engineer IV ($110,000 -$142,000) Responsible for all duties of the previous levels in addition to: Provides expert judgment and analysis for the design, development, implementation, and analysis of technical products and systems. Resolves highly complex technical issues and conducts advanced research. Recommends alterations to development and design to improve quality of products and/or procedures. Has extensive engineering knowledge. R&D Engineer V ($124,000 -$160,000) Responsible for all duties of the previous levels in addition to: Provides expert consultation in one or more areas for the design, development, implementation, and analysis of technical products and systems. May work on advanced, complex technical projects or business issues requiring state‐of‐the‐art technical or industry knowledge. Has extensive engineering knowledge and is considered an expert in one or more engineering specialties. Required Qualifications Bachelor's Engineering (degree must be conferred on or before agreed upon start date) R&D Engineer OAIRE III: Four-seven years of professional work experience in a related field R&D Engineer OAIRE IV: Seven-ten years of professional work experience in a related field R&D Engineer OAIRE V: Ten or more years of professional work experience in a related field Preferred Qualifications PhD or Master's Engineering Ten years of professional work experience in UAS research, design, and UAS Applications